include/linux/if_frad.h

   1 /*
   2  * DLCI/FRAD    Definitions for Frame Relay Access Devices.  DLCI devices are
   3  *              created for each DLCI associated with a FRAD.  The FRAD driver
   4  *              is not truly a network device, but the lower level device
   5  *              handler.  This allows other FRAD manufacturers to use the DLCI
   6  *              code, including its RFC1490 encapsulation alongside the current
   7  *              implementation for the Sangoma cards.
   8  *
   9  * Version:     @(#)if_ifrad.h  0.15    31 Mar 96
  10  *
  11  * Author:      Mike McLagan <mike.mclagan@linux.org>
  12  *
  13  * Changes:
  14  *              0.15    Mike McLagan    changed structure defs (packed)
  15  *                                      re-arranged flags
  16  *                                      added DLCI_RET vars
  17  *
  18  *              This program is free software; you can redistribute it and/or
  19  *              modify it under the terms of the GNU General Public License
  20  *              as published by the Free Software Foundation; either version
  21  *              2 of the License, or (at your option) any later version.
  22  */
  23
  24 #ifndef _FRAD_H_
  25 #define _FRAD_H_
  26
  27 #include <linux/if.h>
  28
  29 #if defined(CONFIG_DLCI) || defined(CONFIG_DLCI_MODULE)
  30
  31 /* Structures and constants associated with the DLCI device driver */
  32
  33 struct dlci_add
  34 {
  35    char  devname[IFNAMSIZ];
  36    short dlci;
  37 };
  38
  39 #define DLCI_GET_CONF   (SIOCDEVPRIVATE + 2)
  40 #define DLCI_SET_CONF   (SIOCDEVPRIVATE + 3)
  41
  42 /*
  43  * These are related to the Sangoma SDLA and should remain in order.
  44  * Code within the SDLA module is based on the specifics of this
  45  * structure.  Change at your own peril.
  46  */
  47 struct dlci_conf {
  48    short flags;
  49    short CIR_fwd;
  50    short Bc_fwd;
  51    short Be_fwd;
  52    short CIR_bwd;
  53    short Bc_bwd;
  54    short Be_bwd;
  55
  56 /* these are part of the status read */
  57    short Tc_fwd;
  58    short Tc_bwd;
  59    short Tf_max;
  60    short Tb_max;
  61
  62 /* add any new fields here above is a mirror of sdla_dlci_conf */
  63 };
  64
  65 #define DLCI_GET_SLAVE  (SIOCDEVPRIVATE + 4)
  66
  67 /* configuration flags for DLCI */
  68 #define DLCI_IGNORE_CIR_OUT     0x0001
  69 #define DLCI_ACCOUNT_CIR_IN     0x0002
  70 #define DLCI_BUFFER_IF          0x0008
  71
  72 #define DLCI_VALID_FLAGS        0x000B
  73
  74 /* FRAD driver uses these to indicate what it did with packet */
  75 #define DLCI_RET_OK             0x00
  76 #define DLCI_RET_ERR            0x01
  77 #define DLCI_RET_DROP           0x02
  78
  79 /* defines for the actual Frame Relay hardware */
  80 #define FRAD_GET_CONF   (SIOCDEVPRIVATE)
  81 #define FRAD_SET_CONF   (SIOCDEVPRIVATE + 1)
  82
  83 #define FRAD_LAST_IOCTL FRAD_SET_CONF
  84
  85 /*
  86  * Based on the setup for the Sangoma SDLA.  If changes are
  87  * necessary to this structure, a routine will need to be
  88  * added to that module to copy fields.
  89  */
  90 struct frad_conf
  91 {
  92    short station;
  93    short flags;
  94    short kbaud;
  95    short clocking;
  96    short mtu;
  97    short T391;
  98    short T392;
  99    short N391;
 100    short N392;
 101    short N393;
 102    short CIR_fwd;
 103    short Bc_fwd;
 104    short Be_fwd;
 105    short CIR_bwd;
 106    short Bc_bwd;
 107    short Be_bwd;
 108
 109 /* Add new fields here, above is a mirror of the sdla_conf */
 110
 111 };
 112
 113 #define FRAD_STATION_CPE        0x0000
 114 #define FRAD_STATION_NODE       0x0001
 115
 116 #define FRAD_TX_IGNORE_CIR      0x0001
 117 #define FRAD_RX_ACCOUNT_CIR     0x0002
 118 #define FRAD_DROP_ABORTED       0x0004
 119 #define FRAD_BUFFERIF           0x0008
 120 #define FRAD_STATS              0x0010
 121 #define FRAD_MCI                0x0100
 122 #define FRAD_AUTODLCI           0x8000
 123 #define FRAD_VALID_FLAGS        0x811F
 124
 125 #define FRAD_CLOCK_INT          0x0001
 126 #define FRAD_CLOCK_EXT          0x0000
 127
 128 #ifdef __KERNEL__
 129
 130 /* these are the fields of an RFC 1490 header */
 131 struct frhdr
 132 {
 133    unsigned char  control;
 134
 135    /* for IP packets, this can be the NLPID */
 136    unsigned char  pad;
 137
 138    unsigned char  NLPID;
 139    unsigned char  OUI[3];
 140    unsigned short PID;
 141
 142 #define IP_NLPID pad
 143 } __attribute__((packed));
 144
 145 /* see RFC 1490 for the definition of the following */
 146 #define FRAD_I_UI               0x03
 147
 148 #define FRAD_P_PADDING          0x00
 149 #define FRAD_P_Q933             0x08
 150 #define FRAD_P_SNAP             0x80
 151 #define FRAD_P_CLNP             0x81
 152 #define FRAD_P_IP               0xCC
 153
 154 struct dlci_local
 155 {
 156    struct net_device_stats stats;
 157    struct net_device      *master;
 158    struct net_device      *slave;
 159    struct dlci_conf       config;
 160    int                    configured;
 161    struct list_head       list;
 162
 163    /* callback function */
 164    void              (*receive)(struct sk_buff *skb, struct net_device *);
 165 };
 166
 167 struct frad_local
 168 {
 169    struct net_device_stats stats;
 170
 171    /* devices which this FRAD is slaved to */
 172    struct net_device     *master[CONFIG_DLCI_MAX];
 173    short             dlci[CONFIG_DLCI_MAX];
 174
 175    struct frad_conf  config;
 176    int               configured;        /* has this device been configured */
 177    int               initialized;       /* mem_start, port, irq set ? */
 178
 179    /* callback functions */
 180    int               (*activate)(struct net_device *, struct net_device *);
 181    int               (*deactivate)(struct net_device *, struct net_device *);
 182    int               (*assoc)(struct net_device *, struct net_device *);
 183    int               (*deassoc)(struct net_device *, struct net_device *);
 184    int               (*dlci_conf)(struct net_device *, struct net_device *, int get);
 185
 186    /* fields that are used by the Sangoma SDLA cards */
 187    struct timer_list timer;
 188    int               type;              /* adapter type */
 189    int               state;             /* state of the S502/8 control latch */
 190    int               buffer;            /* current buffer for S508 firmware */
 191 };
 192
 193 #endif /* __KERNEL__ */
 194
 195 #endif /* CONFIG_DLCI || CONFIG_DLCI_MODULE */
 196
 197 #ifdef __KERNEL__
 198 extern void dlci_ioctl_set(int (*hook)(unsigned int, void __user *));
 199 #endif
 200
 201 #endif