?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
[NETFILTER]: Switch to using ctl_paths in nf_queue and conntrack modules
[wrt350n-kernel.git] / drivers / char / synclink_gt.c
blob64e835f62438d3bb6b629224355403c14681927a
1 /*
2 * $Id: synclink_gt.c,v 4.50 2007/07/25 19:29:25 paulkf Exp $
3 *
4 * Device driver for Microgate SyncLink GT serial adapters.
5 *
6 * written by Paul Fulghum for Microgate Corporation
7 * paulkf@microgate.com
8 *
9 * Microgate and SyncLink are trademarks of Microgate Corporation
10 *
11 * This code is released under the GNU General Public License (GPL)
12 *
13 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
14 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
15 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
16 * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
17 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
18 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
19 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
20 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
21 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
22 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
23 * OF THE POSSIBILITY OF SUCH DAMAGE.
24 */
25
26 /*
27 * DEBUG OUTPUT DEFINITIONS
28 *
29 * uncomment lines below to enable specific types of debug output
30 *
31 * DBGINFO information - most verbose output
32 * DBGERR serious errors
33 * DBGBH bottom half service routine debugging
34 * DBGISR interrupt service routine debugging
35 * DBGDATA output receive and transmit data
36 * DBGTBUF output transmit DMA buffers and registers
37 * DBGRBUF output receive DMA buffers and registers
38 */
39
40 #define DBGINFO(fmt) if (debug_level >= DEBUG_LEVEL_INFO) printk fmt
41 #define DBGERR(fmt) if (debug_level >= DEBUG_LEVEL_ERROR) printk fmt
42 #define DBGBH(fmt) if (debug_level >= DEBUG_LEVEL_BH) printk fmt
43 #define DBGISR(fmt) if (debug_level >= DEBUG_LEVEL_ISR) printk fmt
44 #define DBGDATA(info, buf, size, label) if (debug_level >= DEBUG_LEVEL_DATA) trace_block((info), (buf), (size), (label))
45 //#define DBGTBUF(info) dump_tbufs(info)
46 //#define DBGRBUF(info) dump_rbufs(info)
47
48
49 #include <linux/module.h>
50 #include <linux/version.h>
51 #include <linux/errno.h>
52 #include <linux/signal.h>
53 #include <linux/sched.h>
54 #include <linux/timer.h>
55 #include <linux/interrupt.h>
56 #include <linux/pci.h>
57 #include <linux/tty.h>
58 #include <linux/tty_flip.h>
59 #include <linux/serial.h>
60 #include <linux/major.h>
61 #include <linux/string.h>
62 #include <linux/fcntl.h>
63 #include <linux/ptrace.h>
64 #include <linux/ioport.h>
65 #include <linux/mm.h>
66 #include <linux/slab.h>
67 #include <linux/netdevice.h>
68 #include <linux/vmalloc.h>
69 #include <linux/init.h>
70 #include <linux/delay.h>
71 #include <linux/ioctl.h>
72 #include <linux/termios.h>
73 #include <linux/bitops.h>
74 #include <linux/workqueue.h>
75 #include <linux/hdlc.h>
76
77 #include <asm/system.h>
78 #include <asm/io.h>
79 #include <asm/irq.h>
80 #include <asm/dma.h>
81 #include <asm/types.h>
82 #include <asm/uaccess.h>
83
84 #include "linux/synclink.h"
85
86 #if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINK_GT_MODULE))
87 #define SYNCLINK_GENERIC_HDLC 1
88 #else
89 #define SYNCLINK_GENERIC_HDLC 0
90 #endif
91
92 /*
93 * module identification
94 */
95 static char *driver_name = "SyncLink GT";
96 static char *driver_version = "$Revision: 4.50 $";
97 static char *tty_driver_name = "synclink_gt";
98 static char *tty_dev_prefix = "ttySLG";
99 MODULE_LICENSE("GPL");
100 #define MGSL_MAGIC 0x5401
101 #define MAX_DEVICES 32
102
103 static struct pci_device_id pci_table[] = {
104 {PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
105 {PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT2_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
106 {PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT4_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
107 {PCI_VENDOR_ID_MICROGATE, SYNCLINK_AC_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
108 {0,}, /* terminate list */
109 };
110 MODULE_DEVICE_TABLE(pci, pci_table);
111
112 static int init_one(struct pci_dev *dev,const struct pci_device_id *ent);
113 static void remove_one(struct pci_dev *dev);
114 static struct pci_driver pci_driver = {
115 .name = "synclink_gt",
116 .id_table = pci_table,
117 .probe = init_one,
118 .remove = __devexit_p(remove_one),
119 };
120
121 static int pci_registered;
122
123 /*
124 * module configuration and status
125 */
126 static struct slgt_info *slgt_device_list;
127 static int slgt_device_count;
128
129 static int ttymajor;
130 static int debug_level;
131 static int maxframe[MAX_DEVICES];
132 static int dosyncppp[MAX_DEVICES];
133
134 module_param(ttymajor, int, 0);
135 module_param(debug_level, int, 0);
136 module_param_array(maxframe, int, NULL, 0);
137 module_param_array(dosyncppp, int, NULL, 0);
138
139 MODULE_PARM_DESC(ttymajor, "TTY major device number override: 0=auto assigned");
140 MODULE_PARM_DESC(debug_level, "Debug syslog output: 0=disabled, 1 to 5=increasing detail");
141 MODULE_PARM_DESC(maxframe, "Maximum frame size used by device (4096 to 65535)");
142 MODULE_PARM_DESC(dosyncppp, "Enable synchronous net device, 0=disable 1=enable");
143
144 /*
145 * tty support and callbacks
146 */
147 static struct tty_driver *serial_driver;
148
149 static int open(struct tty_struct *tty, struct file * filp);
150 static void close(struct tty_struct *tty, struct file * filp);
151 static void hangup(struct tty_struct *tty);
152 static void set_termios(struct tty_struct *tty, struct ktermios *old_termios);
153
154 static int write(struct tty_struct *tty, const unsigned char *buf, int count);
155 static void put_char(struct tty_struct *tty, unsigned char ch);
156 static void send_xchar(struct tty_struct *tty, char ch);
157 static void wait_until_sent(struct tty_struct *tty, int timeout);
158 static int write_room(struct tty_struct *tty);
159 static void flush_chars(struct tty_struct *tty);
160 static void flush_buffer(struct tty_struct *tty);
161 static void tx_hold(struct tty_struct *tty);
162 static void tx_release(struct tty_struct *tty);
163
164 static int ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg);
165 static int read_proc(char *page, char **start, off_t off, int count,int *eof, void *data);
166 static int chars_in_buffer(struct tty_struct *tty);
167 static void throttle(struct tty_struct * tty);
168 static void unthrottle(struct tty_struct * tty);
169 static void set_break(struct tty_struct *tty, int break_state);
170
171 /*
172 * generic HDLC support and callbacks
173 */
174 #if SYNCLINK_GENERIC_HDLC
175 #define dev_to_port(D) (dev_to_hdlc(D)->priv)
176 static void hdlcdev_tx_done(struct slgt_info *info);
177 static void hdlcdev_rx(struct slgt_info *info, char *buf, int size);
178 static int hdlcdev_init(struct slgt_info *info);
179 static void hdlcdev_exit(struct slgt_info *info);
180 #endif
181
182
183 /*
184 * device specific structures, macros and functions
185 */
186
187 #define SLGT_MAX_PORTS 4
188 #define SLGT_REG_SIZE 256
189
190 /*
191 * conditional wait facility
192 */
193 struct cond_wait {
194 struct cond_wait *next;
195 wait_queue_head_t q;
196 wait_queue_t wait;
197 unsigned int data;
198 };
199 static void init_cond_wait(struct cond_wait *w, unsigned int data);
200 static void add_cond_wait(struct cond_wait **head, struct cond_wait *w);
201 static void remove_cond_wait(struct cond_wait **head, struct cond_wait *w);
202 static void flush_cond_wait(struct cond_wait **head);
203
204 /*
205 * DMA buffer descriptor and access macros
206 */
207 struct slgt_desc
208 {
209 __le16 count;
210 __le16 status;
211 __le32 pbuf; /* physical address of data buffer */
212 __le32 next; /* physical address of next descriptor */
213
214 /* driver book keeping */
215 char *buf; /* virtual address of data buffer */
216 unsigned int pdesc; /* physical address of this descriptor */
217 dma_addr_t buf_dma_addr;
218 };
219
220 #define set_desc_buffer(a,b) (a).pbuf = cpu_to_le32((unsigned int)(b))
221 #define set_desc_next(a,b) (a).next = cpu_to_le32((unsigned int)(b))
222 #define set_desc_count(a,b)(a).count = cpu_to_le16((unsigned short)(b))
223 #define set_desc_eof(a,b) (a).status = cpu_to_le16((b) ? (le16_to_cpu((a).status) | BIT0) : (le16_to_cpu((a).status) & ~BIT0))
224 #define desc_count(a) (le16_to_cpu((a).count))
225 #define desc_status(a) (le16_to_cpu((a).status))
226 #define desc_complete(a) (le16_to_cpu((a).status) & BIT15)
227 #define desc_eof(a) (le16_to_cpu((a).status) & BIT2)
228 #define desc_crc_error(a) (le16_to_cpu((a).status) & BIT1)
229 #define desc_abort(a) (le16_to_cpu((a).status) & BIT0)
230 #define desc_residue(a) ((le16_to_cpu((a).status) & 0x38) >> 3)
231
232 struct _input_signal_events {
233 int ri_up;
234 int ri_down;
235 int dsr_up;
236 int dsr_down;
237 int dcd_up;
238 int dcd_down;
239 int cts_up;
240 int cts_down;
241 };
242
243 /*
244 * device instance data structure
245 */
246 struct slgt_info {
247 void *if_ptr; /* General purpose pointer (used by SPPP) */
248
249 struct slgt_info *next_device; /* device list link */
250
251 int magic;
252 int flags;
253
254 char device_name[25];
255 struct pci_dev *pdev;
256
257 int port_count; /* count of ports on adapter */
258 int adapter_num; /* adapter instance number */
259 int port_num; /* port instance number */
260
261 /* array of pointers to port contexts on this adapter */
262 struct slgt_info *port_array[SLGT_MAX_PORTS];
263
264 int count; /* count of opens */
265 int line; /* tty line instance number */
266 unsigned short close_delay;
267 unsigned short closing_wait; /* time to wait before closing */
268
269 struct mgsl_icount icount;
270
271 struct tty_struct *tty;
272 int timeout;
273 int x_char; /* xon/xoff character */
274 int blocked_open; /* # of blocked opens */
275 unsigned int read_status_mask;
276 unsigned int ignore_status_mask;
277
278 wait_queue_head_t open_wait;
279 wait_queue_head_t close_wait;
280
281 wait_queue_head_t status_event_wait_q;
282 wait_queue_head_t event_wait_q;
283 struct timer_list tx_timer;
284 struct timer_list rx_timer;
285
286 unsigned int gpio_present;
287 struct cond_wait *gpio_wait_q;
288
289 spinlock_t lock; /* spinlock for synchronizing with ISR */
290
291 struct work_struct task;
292 u32 pending_bh;
293 int bh_requested;
294 int bh_running;
295
296 int isr_overflow;
297 int irq_requested; /* nonzero if IRQ requested */
298 int irq_occurred; /* for diagnostics use */
299
300 /* device configuration */
301
302 unsigned int bus_type;
303 unsigned int irq_level;
304 unsigned long irq_flags;
305
306 unsigned char __iomem * reg_addr; /* memory mapped registers address */
307 u32 phys_reg_addr;
308 int reg_addr_requested;
309
310 MGSL_PARAMS params; /* communications parameters */
311 u32 idle_mode;
312 u32 max_frame_size; /* as set by device config */
313
314 unsigned int raw_rx_size;
315 unsigned int if_mode;
316
317 /* device status */
318
319 int rx_enabled;
320 int rx_restart;
321
322 int tx_enabled;
323 int tx_active;
324
325 unsigned char signals; /* serial signal states */
326 int init_error; /* initialization error */
327
328 unsigned char *tx_buf;
329 int tx_count;
330
331 char flag_buf[MAX_ASYNC_BUFFER_SIZE];
332 char char_buf[MAX_ASYNC_BUFFER_SIZE];
333 BOOLEAN drop_rts_on_tx_done;
334 struct _input_signal_events input_signal_events;
335
336 int dcd_chkcount; /* check counts to prevent */
337 int cts_chkcount; /* too many IRQs if a signal */
338 int dsr_chkcount; /* is floating */
339 int ri_chkcount;
340
341 char *bufs; /* virtual address of DMA buffer lists */
342 dma_addr_t bufs_dma_addr; /* physical address of buffer descriptors */
343
344 unsigned int rbuf_count;
345 struct slgt_desc *rbufs;
346 unsigned int rbuf_current;
347 unsigned int rbuf_index;
348
349 unsigned int tbuf_count;
350 struct slgt_desc *tbufs;
351 unsigned int tbuf_current;
352 unsigned int tbuf_start;
353
354 unsigned char *tmp_rbuf;
355 unsigned int tmp_rbuf_count;
356
357 /* SPPP/Cisco HDLC device parts */
358
359 int netcount;
360 int dosyncppp;
361 spinlock_t netlock;
362 #if SYNCLINK_GENERIC_HDLC
363 struct net_device *netdev;
364 #endif
365
366 };
367
368 static MGSL_PARAMS default_params = {
369 .mode = MGSL_MODE_HDLC,
370 .loopback = 0,
371 .flags = HDLC_FLAG_UNDERRUN_ABORT15,
372 .encoding = HDLC_ENCODING_NRZI_SPACE,
373 .clock_speed = 0,
374 .addr_filter = 0xff,
375 .crc_type = HDLC_CRC_16_CCITT,
376 .preamble_length = HDLC_PREAMBLE_LENGTH_8BITS,
377 .preamble = HDLC_PREAMBLE_PATTERN_NONE,
378 .data_rate = 9600,
379 .data_bits = 8,
380 .stop_bits = 1,
381 .parity = ASYNC_PARITY_NONE
382 };
383
384
385 #define BH_RECEIVE 1
386 #define BH_TRANSMIT 2
387 #define BH_STATUS 4
388 #define IO_PIN_SHUTDOWN_LIMIT 100
389
390 #define DMABUFSIZE 256
391 #define DESC_LIST_SIZE 4096
392
393 #define MASK_PARITY BIT1
394 #define MASK_FRAMING BIT0
395 #define MASK_BREAK BIT14
396 #define MASK_OVERRUN BIT4
397
398 #define GSR 0x00 /* global status */
399 #define JCR 0x04 /* JTAG control */
400 #define IODR 0x08 /* GPIO direction */
401 #define IOER 0x0c /* GPIO interrupt enable */
402 #define IOVR 0x10 /* GPIO value */
403 #define IOSR 0x14 /* GPIO interrupt status */
404 #define TDR 0x80 /* tx data */
405 #define RDR 0x80 /* rx data */
406 #define TCR 0x82 /* tx control */
407 #define TIR 0x84 /* tx idle */
408 #define TPR 0x85 /* tx preamble */
409 #define RCR 0x86 /* rx control */
410 #define VCR 0x88 /* V.24 control */
411 #define CCR 0x89 /* clock control */
412 #define BDR 0x8a /* baud divisor */
413 #define SCR 0x8c /* serial control */
414 #define SSR 0x8e /* serial status */
415 #define RDCSR 0x90 /* rx DMA control/status */
416 #define TDCSR 0x94 /* tx DMA control/status */
417 #define RDDAR 0x98 /* rx DMA descriptor address */
418 #define TDDAR 0x9c /* tx DMA descriptor address */
419
420 #define RXIDLE BIT14
421 #define RXBREAK BIT14
422 #define IRQ_TXDATA BIT13
423 #define IRQ_TXIDLE BIT12
424 #define IRQ_TXUNDER BIT11 /* HDLC */
425 #define IRQ_RXDATA BIT10
426 #define IRQ_RXIDLE BIT9 /* HDLC */
427 #define IRQ_RXBREAK BIT9 /* async */
428 #define IRQ_RXOVER BIT8
429 #define IRQ_DSR BIT7
430 #define IRQ_CTS BIT6
431 #define IRQ_DCD BIT5
432 #define IRQ_RI BIT4
433 #define IRQ_ALL 0x3ff0
434 #define IRQ_MASTER BIT0
435
436 #define slgt_irq_on(info, mask) \
437 wr_reg16((info), SCR, (unsigned short)(rd_reg16((info), SCR) | (mask)))
438 #define slgt_irq_off(info, mask) \
439 wr_reg16((info), SCR, (unsigned short)(rd_reg16((info), SCR) & ~(mask)))
440
441 static __u8 rd_reg8(struct slgt_info *info, unsigned int addr);
442 static void wr_reg8(struct slgt_info *info, unsigned int addr, __u8 value);
443 static __u16 rd_reg16(struct slgt_info *info, unsigned int addr);
444 static void wr_reg16(struct slgt_info *info, unsigned int addr, __u16 value);
445 static __u32 rd_reg32(struct slgt_info *info, unsigned int addr);
446 static void wr_reg32(struct slgt_info *info, unsigned int addr, __u32 value);
447
448 static void msc_set_vcr(struct slgt_info *info);
449
450 static int startup(struct slgt_info *info);
451 static int block_til_ready(struct tty_struct *tty, struct file * filp,struct slgt_info *info);
452 static void shutdown(struct slgt_info *info);
453 static void program_hw(struct slgt_info *info);
454 static void change_params(struct slgt_info *info);
455
456 static int register_test(struct slgt_info *info);
457 static int irq_test(struct slgt_info *info);
458 static int loopback_test(struct slgt_info *info);
459 static int adapter_test(struct slgt_info *info);
460
461 static void reset_adapter(struct slgt_info *info);
462 static void reset_port(struct slgt_info *info);
463 static void async_mode(struct slgt_info *info);
464 static void sync_mode(struct slgt_info *info);
465
466 static void rx_stop(struct slgt_info *info);
467 static void rx_start(struct slgt_info *info);
468 static void reset_rbufs(struct slgt_info *info);
469 static void free_rbufs(struct slgt_info *info, unsigned int first, unsigned int last);
470 static void rdma_reset(struct slgt_info *info);
471 static int rx_get_frame(struct slgt_info *info);
472 static int rx_get_buf(struct slgt_info *info);
473
474 static void tx_start(struct slgt_info *info);
475 static void tx_stop(struct slgt_info *info);
476 static void tx_set_idle(struct slgt_info *info);
477 static unsigned int free_tbuf_count(struct slgt_info *info);
478 static void reset_tbufs(struct slgt_info *info);
479 static void tdma_reset(struct slgt_info *info);
480 static void tdma_start(struct slgt_info *info);
481 static void tx_load(struct slgt_info *info, const char *buf, unsigned int count);
482
483 static void get_signals(struct slgt_info *info);
484 static void set_signals(struct slgt_info *info);
485 static void enable_loopback(struct slgt_info *info);
486 static void set_rate(struct slgt_info *info, u32 data_rate);
487
488 static int bh_action(struct slgt_info *info);
489 static void bh_handler(struct work_struct *work);
490 static void bh_transmit(struct slgt_info *info);
491 static void isr_serial(struct slgt_info *info);
492 static void isr_rdma(struct slgt_info *info);
493 static void isr_txeom(struct slgt_info *info, unsigned short status);
494 static void isr_tdma(struct slgt_info *info);
495 static irqreturn_t slgt_interrupt(int irq, void *dev_id);
496
497 static int alloc_dma_bufs(struct slgt_info *info);
498 static void free_dma_bufs(struct slgt_info *info);
499 static int alloc_desc(struct slgt_info *info);
500 static void free_desc(struct slgt_info *info);
501 static int alloc_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count);
502 static void free_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count);
503
504 static int alloc_tmp_rbuf(struct slgt_info *info);
505 static void free_tmp_rbuf(struct slgt_info *info);
506
507 static void tx_timeout(unsigned long context);
508 static void rx_timeout(unsigned long context);
509
510 /*
511 * ioctl handlers
512 */
513 static int get_stats(struct slgt_info *info, struct mgsl_icount __user *user_icount);
514 static int get_params(struct slgt_info *info, MGSL_PARAMS __user *params);
515 static int set_params(struct slgt_info *info, MGSL_PARAMS __user *params);
516 static int get_txidle(struct slgt_info *info, int __user *idle_mode);
517 static int set_txidle(struct slgt_info *info, int idle_mode);
518 static int tx_enable(struct slgt_info *info, int enable);
519 static int tx_abort(struct slgt_info *info);
520 static int rx_enable(struct slgt_info *info, int enable);
521 static int modem_input_wait(struct slgt_info *info,int arg);
522 static int wait_mgsl_event(struct slgt_info *info, int __user *mask_ptr);
523 static int tiocmget(struct tty_struct *tty, struct file *file);
524 static int tiocmset(struct tty_struct *tty, struct file *file,
525 unsigned int set, unsigned int clear);
526 static void set_break(struct tty_struct *tty, int break_state);
527 static int get_interface(struct slgt_info *info, int __user *if_mode);
528 static int set_interface(struct slgt_info *info, int if_mode);
529 static int set_gpio(struct slgt_info *info, struct gpio_desc __user *gpio);
530 static int get_gpio(struct slgt_info *info, struct gpio_desc __user *gpio);
531 static int wait_gpio(struct slgt_info *info, struct gpio_desc __user *gpio);
532
533 /*
534 * driver functions
535 */
536 static void add_device(struct slgt_info *info);
537 static void device_init(int adapter_num, struct pci_dev *pdev);
538 static int claim_resources(struct slgt_info *info);
539 static void release_resources(struct slgt_info *info);
540
541 /*
542 * DEBUG OUTPUT CODE
543 */
544 #ifndef DBGINFO
545 #define DBGINFO(fmt)
546 #endif
547 #ifndef DBGERR
548 #define DBGERR(fmt)
549 #endif
550 #ifndef DBGBH
551 #define DBGBH(fmt)
552 #endif
553 #ifndef DBGISR
554 #define DBGISR(fmt)
555 #endif
556
557 #ifdef DBGDATA
558 static void trace_block(struct slgt_info *info, const char *data, int count, const char *label)
559 {
560 int i;
561 int linecount;
562 printk("%s %s data:\n",info->device_name, label);
563 while(count) {
564 linecount = (count > 16) ? 16 : count;
565 for(i=0; i < linecount; i++)
566 printk("%02X ",(unsigned char)data[i]);
567 for(;i<17;i++)
568 printk(" ");
569 for(i=0;i<linecount;i++) {
570 if (data[i]>=040 && data[i]<=0176)
571 printk("%c",data[i]);
572 else
573 printk(".");
574 }
575 printk("\n");
576 data += linecount;
577 count -= linecount;
578 }
579 }
580 #else
581 #define DBGDATA(info, buf, size, label)
582 #endif
583
584 #ifdef DBGTBUF
585 static void dump_tbufs(struct slgt_info *info)
586 {
587 int i;
588 printk("tbuf_current=%d\n", info->tbuf_current);
589 for (i=0 ; i < info->tbuf_count ; i++) {
590 printk("%d: count=%04X status=%04X\n",
591 i, le16_to_cpu(info->tbufs[i].count), le16_to_cpu(info->tbufs[i].status));
592 }
593 }
594 #else
595 #define DBGTBUF(info)
596 #endif
597
598 #ifdef DBGRBUF
599 static void dump_rbufs(struct slgt_info *info)
600 {
601 int i;
602 printk("rbuf_current=%d\n", info->rbuf_current);
603 for (i=0 ; i < info->rbuf_count ; i++) {
604 printk("%d: count=%04X status=%04X\n",
605 i, le16_to_cpu(info->rbufs[i].count), le16_to_cpu(info->rbufs[i].status));
606 }
607 }
608 #else
609 #define DBGRBUF(info)
610 #endif
611
612 static inline int sanity_check(struct slgt_info *info, char *devname, const char *name)
613 {
614 #ifdef SANITY_CHECK
615 if (!info) {
616 printk("null struct slgt_info for (%s) in %s\n", devname, name);
617 return 1;
618 }
619 if (info->magic != MGSL_MAGIC) {
620 printk("bad magic number struct slgt_info (%s) in %s\n", devname, name);
621 return 1;
622 }
623 #else
624 if (!info)
625 return 1;
626 #endif
627 return 0;
628 }
629
630 /**
631 * line discipline callback wrappers
632 *
633 * The wrappers maintain line discipline references
634 * while calling into the line discipline.
635 *
636 * ldisc_receive_buf - pass receive data to line discipline
637 */
638 static void ldisc_receive_buf(struct tty_struct *tty,
639 const __u8 *data, char *flags, int count)
640 {
641 struct tty_ldisc *ld;
642 if (!tty)
643 return;
644 ld = tty_ldisc_ref(tty);
645 if (ld) {
646 if (ld->receive_buf)
647 ld->receive_buf(tty, data, flags, count);
648 tty_ldisc_deref(ld);
649 }
650 }
651
652 /* tty callbacks */
653
654 static int open(struct tty_struct *tty, struct file *filp)
655 {
656 struct slgt_info *info;
657 int retval, line;
658 unsigned long flags;
659
660 line = tty->index;
661 if ((line < 0) || (line >= slgt_device_count)) {
662 DBGERR(("%s: open with invalid line #%d.\n", driver_name, line));
663 return -ENODEV;
664 }
665
666 info = slgt_device_list;
667 while(info && info->line != line)
668 info = info->next_device;
669 if (sanity_check(info, tty->name, "open"))
670 return -ENODEV;
671 if (info->init_error) {
672 DBGERR(("%s init error=%d\n", info->device_name, info->init_error));
673 return -ENODEV;
674 }
675
676 tty->driver_data = info;
677 info->tty = tty;
678
679 DBGINFO(("%s open, old ref count = %d\n", info->device_name, info->count));
680
681 /* If port is closing, signal caller to try again */
682 if (tty_hung_up_p(filp) || info->flags & ASYNC_CLOSING){
683 if (info->flags & ASYNC_CLOSING)
684 interruptible_sleep_on(&info->close_wait);
685 retval = ((info->flags & ASYNC_HUP_NOTIFY) ?
686 -EAGAIN : -ERESTARTSYS);
687 goto cleanup;
688 }
689
690 info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
691
692 spin_lock_irqsave(&info->netlock, flags);
693 if (info->netcount) {
694 retval = -EBUSY;
695 spin_unlock_irqrestore(&info->netlock, flags);
696 goto cleanup;
697 }
698 info->count++;
699 spin_unlock_irqrestore(&info->netlock, flags);
700
701 if (info->count == 1) {
702 /* 1st open on this device, init hardware */
703 retval = startup(info);
704 if (retval < 0)
705 goto cleanup;
706 }
707
708 retval = block_til_ready(tty, filp, info);
709 if (retval) {
710 DBGINFO(("%s block_til_ready rc=%d\n", info->device_name, retval));
711 goto cleanup;
712 }
713
714 retval = 0;
715
716 cleanup:
717 if (retval) {
718 if (tty->count == 1)
719 info->tty = NULL; /* tty layer will release tty struct */
720 if(info->count)
721 info->count--;
722 }
723
724 DBGINFO(("%s open rc=%d\n", info->device_name, retval));
725 return retval;
726 }
727
728 static void close(struct tty_struct *tty, struct file *filp)
729 {
730 struct slgt_info *info = tty->driver_data;
731
732 if (sanity_check(info, tty->name, "close"))
733 return;
734 DBGINFO(("%s close entry, count=%d\n", info->device_name, info->count));
735
736 if (!info->count)
737 return;
738
739 if (tty_hung_up_p(filp))
740 goto cleanup;
741
742 if ((tty->count == 1) && (info->count != 1)) {
743 /*
744 * tty->count is 1 and the tty structure will be freed.
745 * info->count should be one in this case.
746 * if it's not, correct it so that the port is shutdown.
747 */
748 DBGERR(("%s close: bad refcount; tty->count=1, "
749 "info->count=%d\n", info->device_name, info->count));
750 info->count = 1;
751 }
752
753 info->count--;
754
755 /* if at least one open remaining, leave hardware active */
756 if (info->count)
757 goto cleanup;
758
759 info->flags |= ASYNC_CLOSING;
760
761 /* set tty->closing to notify line discipline to
762 * only process XON/XOFF characters. Only the N_TTY
763 * discipline appears to use this (ppp does not).
764 */
765 tty->closing = 1;
766
767 /* wait for transmit data to clear all layers */
768
769 if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE) {
770 DBGINFO(("%s call tty_wait_until_sent\n", info->device_name));
771 tty_wait_until_sent(tty, info->closing_wait);
772 }
773
774 if (info->flags & ASYNC_INITIALIZED)
775 wait_until_sent(tty, info->timeout);
776 if (tty->driver->flush_buffer)
777 tty->driver->flush_buffer(tty);
778 tty_ldisc_flush(tty);
779
780 shutdown(info);
781
782 tty->closing = 0;
783 info->tty = NULL;
784
785 if (info->blocked_open) {
786 if (info->close_delay) {
787 msleep_interruptible(jiffies_to_msecs(info->close_delay));
788 }
789 wake_up_interruptible(&info->open_wait);
790 }
791
792 info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
793
794 wake_up_interruptible(&info->close_wait);
795
796 cleanup:
797 DBGINFO(("%s close exit, count=%d\n", tty->driver->name, info->count));
798 }
799
800 static void hangup(struct tty_struct *tty)
801 {
802 struct slgt_info *info = tty->driver_data;
803
804 if (sanity_check(info, tty->name, "hangup"))
805 return;
806 DBGINFO(("%s hangup\n", info->device_name));
807
808 flush_buffer(tty);
809 shutdown(info);
810
811 info->count = 0;
812 info->flags &= ~ASYNC_NORMAL_ACTIVE;
813 info->tty = NULL;
814
815 wake_up_interruptible(&info->open_wait);
816 }
817
818 static void set_termios(struct tty_struct *tty, struct ktermios *old_termios)
819 {
820 struct slgt_info *info = tty->driver_data;
821 unsigned long flags;
822
823 DBGINFO(("%s set_termios\n", tty->driver->name));
824
825 change_params(info);
826
827 /* Handle transition to B0 status */
828 if (old_termios->c_cflag & CBAUD &&
829 !(tty->termios->c_cflag & CBAUD)) {
830 info->signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
831 spin_lock_irqsave(&info->lock,flags);
832 set_signals(info);
833 spin_unlock_irqrestore(&info->lock,flags);
834 }
835
836 /* Handle transition away from B0 status */
837 if (!(old_termios->c_cflag & CBAUD) &&
838 tty->termios->c_cflag & CBAUD) {
839 info->signals |= SerialSignal_DTR;
840 if (!(tty->termios->c_cflag & CRTSCTS) ||
841 !test_bit(TTY_THROTTLED, &tty->flags)) {
842 info->signals |= SerialSignal_RTS;
843 }
844 spin_lock_irqsave(&info->lock,flags);
845 set_signals(info);
846 spin_unlock_irqrestore(&info->lock,flags);
847 }
848
849 /* Handle turning off CRTSCTS */
850 if (old_termios->c_cflag & CRTSCTS &&
851 !(tty->termios->c_cflag & CRTSCTS)) {
852 tty->hw_stopped = 0;
853 tx_release(tty);
854 }
855 }
856
857 static int write(struct tty_struct *tty,
858 const unsigned char *buf, int count)
859 {
860 int ret = 0;
861 struct slgt_info *info = tty->driver_data;
862 unsigned long flags;
863
864 if (sanity_check(info, tty->name, "write"))
865 goto cleanup;
866 DBGINFO(("%s write count=%d\n", info->device_name, count));
867
868 if (!info->tx_buf)
869 goto cleanup;
870
871 if (count > info->max_frame_size) {
872 ret = -EIO;
873 goto cleanup;
874 }
875
876 if (!count)
877 goto cleanup;
878
879 if (info->params.mode == MGSL_MODE_RAW ||
880 info->params.mode == MGSL_MODE_MONOSYNC ||
881 info->params.mode == MGSL_MODE_BISYNC) {
882 unsigned int bufs_needed = (count/DMABUFSIZE);
883 unsigned int bufs_free = free_tbuf_count(info);
884 if (count % DMABUFSIZE)
885 ++bufs_needed;
886 if (bufs_needed > bufs_free)
887 goto cleanup;
888 } else {
889 if (info->tx_active)
890 goto cleanup;
891 if (info->tx_count) {
892 /* send accumulated data from send_char() calls */
893 /* as frame and wait before accepting more data. */
894 tx_load(info, info->tx_buf, info->tx_count);
895 goto start;
896 }
897 }
898
899 ret = info->tx_count = count;
900 tx_load(info, buf, count);
901 goto start;
902
903 start:
904 if (info->tx_count && !tty->stopped && !tty->hw_stopped) {
905 spin_lock_irqsave(&info->lock,flags);
906 if (!info->tx_active)
907 tx_start(info);
908 else
909 tdma_start(info);
910 spin_unlock_irqrestore(&info->lock,flags);
911 }
912
913 cleanup:
914 DBGINFO(("%s write rc=%d\n", info->device_name, ret));
915 return ret;
916 }
917
918 static void put_char(struct tty_struct *tty, unsigned char ch)
919 {
920 struct slgt_info *info = tty->driver_data;
921 unsigned long flags;
922
923 if (sanity_check(info, tty->name, "put_char"))
924 return;
925 DBGINFO(("%s put_char(%d)\n", info->device_name, ch));
926 if (!info->tx_buf)
927 return;
928 spin_lock_irqsave(&info->lock,flags);
929 if (!info->tx_active && (info->tx_count < info->max_frame_size))
930 info->tx_buf[info->tx_count++] = ch;
931 spin_unlock_irqrestore(&info->lock,flags);
932 }
933
934 static void send_xchar(struct tty_struct *tty, char ch)
935 {
936 struct slgt_info *info = tty->driver_data;
937 unsigned long flags;
938
939 if (sanity_check(info, tty->name, "send_xchar"))
940 return;
941 DBGINFO(("%s send_xchar(%d)\n", info->device_name, ch));
942 info->x_char = ch;
943 if (ch) {
944 spin_lock_irqsave(&info->lock,flags);
945 if (!info->tx_enabled)
946 tx_start(info);
947 spin_unlock_irqrestore(&info->lock,flags);
948 }
949 }
950
951 static void wait_until_sent(struct tty_struct *tty, int timeout)
952 {
953 struct slgt_info *info = tty->driver_data;
954 unsigned long orig_jiffies, char_time;
955
956 if (!info )
957 return;
958 if (sanity_check(info, tty->name, "wait_until_sent"))
959 return;
960 DBGINFO(("%s wait_until_sent entry\n", info->device_name));
961 if (!(info->flags & ASYNC_INITIALIZED))
962 goto exit;
963
964 orig_jiffies = jiffies;
965
966 /* Set check interval to 1/5 of estimated time to
967 * send a character, and make it at least 1. The check
968 * interval should also be less than the timeout.
969 * Note: use tight timings here to satisfy the NIST-PCTS.
970 */
971
972 if (info->params.data_rate) {
973 char_time = info->timeout/(32 * 5);
974 if (!char_time)
975 char_time++;
976 } else
977 char_time = 1;
978
979 if (timeout)
980 char_time = min_t(unsigned long, char_time, timeout);
981
982 while (info->tx_active) {
983 msleep_interruptible(jiffies_to_msecs(char_time));
984 if (signal_pending(current))
985 break;
986 if (timeout && time_after(jiffies, orig_jiffies + timeout))
987 break;
988 }
989
990 exit:
991 DBGINFO(("%s wait_until_sent exit\n", info->device_name));
992 }
993
994 static int write_room(struct tty_struct *tty)
995 {
996 struct slgt_info *info = tty->driver_data;
997 int ret;
998
999 if (sanity_check(info, tty->name, "write_room"))
1000 return 0;
1001 ret = (info->tx_active) ? 0 : HDLC_MAX_FRAME_SIZE;
1002 DBGINFO(("%s write_room=%d\n", info->device_name, ret));
1003 return ret;
1004 }
1005
1006 static void flush_chars(struct tty_struct *tty)
1007 {
1008 struct slgt_info *info = tty->driver_data;
1009 unsigned long flags;
1010
1011 if (sanity_check(info, tty->name, "flush_chars"))
1012 return;
1013 DBGINFO(("%s flush_chars entry tx_count=%d\n", info->device_name, info->tx_count));
1014
1015 if (info->tx_count <= 0 || tty->stopped ||
1016 tty->hw_stopped || !info->tx_buf)
1017 return;
1018
1019 DBGINFO(("%s flush_chars start transmit\n", info->device_name));
1020
1021 spin_lock_irqsave(&info->lock,flags);
1022 if (!info->tx_active && info->tx_count) {
1023 tx_load(info, info->tx_buf,info->tx_count);
1024 tx_start(info);
1025 }
1026 spin_unlock_irqrestore(&info->lock,flags);
1027 }
1028
1029 static void flush_buffer(struct tty_struct *tty)
1030 {
1031 struct slgt_info *info = tty->driver_data;
1032 unsigned long flags;
1033
1034 if (sanity_check(info, tty->name, "flush_buffer"))
1035 return;
1036 DBGINFO(("%s flush_buffer\n", info->device_name));
1037
1038 spin_lock_irqsave(&info->lock,flags);
1039 if (!info->tx_active)
1040 info->tx_count = 0;
1041 spin_unlock_irqrestore(&info->lock,flags);
1042
1043 tty_wakeup(tty);
1044 }
1045
1046 /*
1047 * throttle (stop) transmitter
1048 */
1049 static void tx_hold(struct tty_struct *tty)
1050 {
1051 struct slgt_info *info = tty->driver_data;
1052 unsigned long flags;
1053
1054 if (sanity_check(info, tty->name, "tx_hold"))
1055 return;
1056 DBGINFO(("%s tx_hold\n", info->device_name));
1057 spin_lock_irqsave(&info->lock,flags);
1058 if (info->tx_enabled && info->params.mode == MGSL_MODE_ASYNC)
1059 tx_stop(info);
1060 spin_unlock_irqrestore(&info->lock,flags);
1061 }
1062
1063 /*
1064 * release (start) transmitter
1065 */
1066 static void tx_release(struct tty_struct *tty)
1067 {
1068 struct slgt_info *info = tty->driver_data;
1069 unsigned long flags;
1070
1071 if (sanity_check(info, tty->name, "tx_release"))
1072 return;
1073 DBGINFO(("%s tx_release\n", info->device_name));
1074 spin_lock_irqsave(&info->lock,flags);
1075 if (!info->tx_active && info->tx_count) {
1076 tx_load(info, info->tx_buf, info->tx_count);
1077 tx_start(info);
1078 }
1079 spin_unlock_irqrestore(&info->lock,flags);
1080 }
1081
1082 /*
1083 * Service an IOCTL request
1084 *
1085 * Arguments
1086 *
1087 * tty pointer to tty instance data
1088 * file pointer to associated file object for device
1089 * cmd IOCTL command code
1090 * arg command argument/context
1091 *
1092 * Return 0 if success, otherwise error code
1093 */
1094 static int ioctl(struct tty_struct *tty, struct file *file,
1095 unsigned int cmd, unsigned long arg)
1096 {
1097 struct slgt_info *info = tty->driver_data;
1098 struct mgsl_icount cnow; /* kernel counter temps */
1099 struct serial_icounter_struct __user *p_cuser; /* user space */
1100 unsigned long flags;
1101 void __user *argp = (void __user *)arg;
1102
1103 if (sanity_check(info, tty->name, "ioctl"))
1104 return -ENODEV;
1105 DBGINFO(("%s ioctl() cmd=%08X\n", info->device_name, cmd));
1106
1107 if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
1108 (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
1109 if (tty->flags & (1 << TTY_IO_ERROR))
1110 return -EIO;
1111 }
1112
1113 switch (cmd) {
1114 case MGSL_IOCGPARAMS:
1115 return get_params(info, argp);
1116 case MGSL_IOCSPARAMS:
1117 return set_params(info, argp);
1118 case MGSL_IOCGTXIDLE:
1119 return get_txidle(info, argp);
1120 case MGSL_IOCSTXIDLE:
1121 return set_txidle(info, (int)arg);
1122 case MGSL_IOCTXENABLE:
1123 return tx_enable(info, (int)arg);
1124 case MGSL_IOCRXENABLE:
1125 return rx_enable(info, (int)arg);
1126 case MGSL_IOCTXABORT:
1127 return tx_abort(info);
1128 case MGSL_IOCGSTATS:
1129 return get_stats(info, argp);
1130 case MGSL_IOCWAITEVENT:
1131 return wait_mgsl_event(info, argp);
1132 case TIOCMIWAIT:
1133 return modem_input_wait(info,(int)arg);
1134 case MGSL_IOCGIF:
1135 return get_interface(info, argp);
1136 case MGSL_IOCSIF:
1137 return set_interface(info,(int)arg);
1138 case MGSL_IOCSGPIO:
1139 return set_gpio(info, argp);
1140 case MGSL_IOCGGPIO:
1141 return get_gpio(info, argp);
1142 case MGSL_IOCWAITGPIO:
1143 return wait_gpio(info, argp);
1144 case TIOCGICOUNT:
1145 spin_lock_irqsave(&info->lock,flags);
1146 cnow = info->icount;
1147 spin_unlock_irqrestore(&info->lock,flags);
1148 p_cuser = argp;
1149 if (put_user(cnow.cts, &p_cuser->cts) ||
1150 put_user(cnow.dsr, &p_cuser->dsr) ||
1151 put_user(cnow.rng, &p_cuser->rng) ||
1152 put_user(cnow.dcd, &p_cuser->dcd) ||
1153 put_user(cnow.rx, &p_cuser->rx) ||
1154 put_user(cnow.tx, &p_cuser->tx) ||
1155 put_user(cnow.frame, &p_cuser->frame) ||
1156 put_user(cnow.overrun, &p_cuser->overrun) ||
1157 put_user(cnow.parity, &p_cuser->parity) ||
1158 put_user(cnow.brk, &p_cuser->brk) ||
1159 put_user(cnow.buf_overrun, &p_cuser->buf_overrun))
1160 return -EFAULT;
1161 return 0;
1162 default:
1163 return -ENOIOCTLCMD;
1164 }
1165 return 0;
1166 }
1167
1168 /*
1169 * support for 32 bit ioctl calls on 64 bit systems
1170 */
1171 #ifdef CONFIG_COMPAT
1172 static long get_params32(struct slgt_info *info, struct MGSL_PARAMS32 __user *user_params)
1173 {
1174 struct MGSL_PARAMS32 tmp_params;
1175
1176 DBGINFO(("%s get_params32\n", info->device_name));
1177 tmp_params.mode = (compat_ulong_t)info->params.mode;
1178 tmp_params.loopback = info->params.loopback;
1179 tmp_params.flags = info->params.flags;
1180 tmp_params.encoding = info->params.encoding;
1181 tmp_params.clock_speed = (compat_ulong_t)info->params.clock_speed;
1182 tmp_params.addr_filter = info->params.addr_filter;
1183 tmp_params.crc_type = info->params.crc_type;
1184 tmp_params.preamble_length = info->params.preamble_length;
1185 tmp_params.preamble = info->params.preamble;
1186 tmp_params.data_rate = (compat_ulong_t)info->params.data_rate;
1187 tmp_params.data_bits = info->params.data_bits;
1188 tmp_params.stop_bits = info->params.stop_bits;
1189 tmp_params.parity = info->params.parity;
1190 if (copy_to_user(user_params, &tmp_params, sizeof(struct MGSL_PARAMS32)))
1191 return -EFAULT;
1192 return 0;
1193 }
1194
1195 static long set_params32(struct slgt_info *info, struct MGSL_PARAMS32 __user *new_params)
1196 {
1197 struct MGSL_PARAMS32 tmp_params;
1198
1199 DBGINFO(("%s set_params32\n", info->device_name));
1200 if (copy_from_user(&tmp_params, new_params, sizeof(struct MGSL_PARAMS32)))
1201 return -EFAULT;
1202
1203 spin_lock(&info->lock);
1204 info->params.mode = tmp_params.mode;
1205 info->params.loopback = tmp_params.loopback;
1206 info->params.flags = tmp_params.flags;
1207 info->params.encoding = tmp_params.encoding;
1208 info->params.clock_speed = tmp_params.clock_speed;
1209 info->params.addr_filter = tmp_params.addr_filter;
1210 info->params.crc_type = tmp_params.crc_type;
1211 info->params.preamble_length = tmp_params.preamble_length;
1212 info->params.preamble = tmp_params.preamble;
1213 info->params.data_rate = tmp_params.data_rate;
1214 info->params.data_bits = tmp_params.data_bits;
1215 info->params.stop_bits = tmp_params.stop_bits;
1216 info->params.parity = tmp_params.parity;
1217 spin_unlock(&info->lock);
1218
1219 change_params(info);
1220
1221 return 0;
1222 }
1223
1224 static long slgt_compat_ioctl(struct tty_struct *tty, struct file *file,
1225 unsigned int cmd, unsigned long arg)
1226 {
1227 struct slgt_info *info = tty->driver_data;
1228 int rc = -ENOIOCTLCMD;
1229
1230 if (sanity_check(info, tty->name, "compat_ioctl"))
1231 return -ENODEV;
1232 DBGINFO(("%s compat_ioctl() cmd=%08X\n", info->device_name, cmd));
1233
1234 switch (cmd) {
1235
1236 case MGSL_IOCSPARAMS32:
1237 rc = set_params32(info, compat_ptr(arg));
1238 break;
1239
1240 case MGSL_IOCGPARAMS32:
1241 rc = get_params32(info, compat_ptr(arg));
1242 break;
1243
1244 case MGSL_IOCGPARAMS:
1245 case MGSL_IOCSPARAMS:
1246 case MGSL_IOCGTXIDLE:
1247 case MGSL_IOCGSTATS:
1248 case MGSL_IOCWAITEVENT:
1249 case MGSL_IOCGIF:
1250 case MGSL_IOCSGPIO:
1251 case MGSL_IOCGGPIO:
1252 case MGSL_IOCWAITGPIO:
1253 case TIOCGICOUNT:
1254 rc = ioctl(tty, file, cmd, (unsigned long)(compat_ptr(arg)));
1255 break;
1256
1257 case MGSL_IOCSTXIDLE:
1258 case MGSL_IOCTXENABLE:
1259 case MGSL_IOCRXENABLE:
1260 case MGSL_IOCTXABORT:
1261 case TIOCMIWAIT:
1262 case MGSL_IOCSIF:
1263 rc = ioctl(tty, file, cmd, arg);
1264 break;
1265 }
1266
1267 DBGINFO(("%s compat_ioctl() cmd=%08X rc=%d\n", info->device_name, cmd, rc));
1268 return rc;
1269 }
1270 #else
1271 #define slgt_compat_ioctl NULL
1272 #endif /* ifdef CONFIG_COMPAT */
1273
1274 /*
1275 * proc fs support
1276 */
1277 static inline int line_info(char *buf, struct slgt_info *info)
1278 {
1279 char stat_buf[30];
1280 int ret;
1281 unsigned long flags;
1282
1283 ret = sprintf(buf, "%s: IO=%08X IRQ=%d MaxFrameSize=%u\n",
1284 info->device_name, info->phys_reg_addr,
1285 info->irq_level, info->max_frame_size);
1286
1287 /* output current serial signal states */
1288 spin_lock_irqsave(&info->lock,flags);
1289 get_signals(info);
1290 spin_unlock_irqrestore(&info->lock,flags);
1291
1292 stat_buf[0] = 0;
1293 stat_buf[1] = 0;
1294 if (info->signals & SerialSignal_RTS)
1295 strcat(stat_buf, "|RTS");
1296 if (info->signals & SerialSignal_CTS)
1297 strcat(stat_buf, "|CTS");
1298 if (info->signals & SerialSignal_DTR)
1299 strcat(stat_buf, "|DTR");
1300 if (info->signals & SerialSignal_DSR)
1301 strcat(stat_buf, "|DSR");
1302 if (info->signals & SerialSignal_DCD)
1303 strcat(stat_buf, "|CD");
1304 if (info->signals & SerialSignal_RI)
1305 strcat(stat_buf, "|RI");
1306
1307 if (info->params.mode != MGSL_MODE_ASYNC) {
1308 ret += sprintf(buf+ret, "\tHDLC txok:%d rxok:%d",
1309 info->icount.txok, info->icount.rxok);
1310 if (info->icount.txunder)
1311 ret += sprintf(buf+ret, " txunder:%d", info->icount.txunder);
1312 if (info->icount.txabort)
1313 ret += sprintf(buf+ret, " txabort:%d", info->icount.txabort);
1314 if (info->icount.rxshort)
1315 ret += sprintf(buf+ret, " rxshort:%d", info->icount.rxshort);
1316 if (info->icount.rxlong)
1317 ret += sprintf(buf+ret, " rxlong:%d", info->icount.rxlong);
1318 if (info->icount.rxover)
1319 ret += sprintf(buf+ret, " rxover:%d", info->icount.rxover);
1320 if (info->icount.rxcrc)
1321 ret += sprintf(buf+ret, " rxcrc:%d", info->icount.rxcrc);
1322 } else {
1323 ret += sprintf(buf+ret, "\tASYNC tx:%d rx:%d",
1324 info->icount.tx, info->icount.rx);
1325 if (info->icount.frame)
1326 ret += sprintf(buf+ret, " fe:%d", info->icount.frame);
1327 if (info->icount.parity)
1328 ret += sprintf(buf+ret, " pe:%d", info->icount.parity);
1329 if (info->icount.brk)
1330 ret += sprintf(buf+ret, " brk:%d", info->icount.brk);
1331 if (info->icount.overrun)
1332 ret += sprintf(buf+ret, " oe:%d", info->icount.overrun);
1333 }
1334
1335 /* Append serial signal status to end */
1336 ret += sprintf(buf+ret, " %s\n", stat_buf+1);
1337
1338 ret += sprintf(buf+ret, "\ttxactive=%d bh_req=%d bh_run=%d pending_bh=%x\n",
1339 info->tx_active,info->bh_requested,info->bh_running,
1340 info->pending_bh);
1341
1342 return ret;
1343 }
1344
1345 /* Called to print information about devices
1346 */
1347 static int read_proc(char *page, char **start, off_t off, int count,
1348 int *eof, void *data)
1349 {
1350 int len = 0, l;
1351 off_t begin = 0;
1352 struct slgt_info *info;
1353
1354 len += sprintf(page, "synclink_gt driver:%s\n", driver_version);
1355
1356 info = slgt_device_list;
1357 while( info ) {
1358 l = line_info(page + len, info);
1359 len += l;
1360 if (len+begin > off+count)
1361 goto done;
1362 if (len+begin < off) {
1363 begin += len;
1364 len = 0;
1365 }
1366 info = info->next_device;
1367 }
1368
1369 *eof = 1;
1370 done:
1371 if (off >= len+begin)
1372 return 0;
1373 *start = page + (off-begin);
1374 return ((count < begin+len-off) ? count : begin+len-off);
1375 }
1376
1377 /*
1378 * return count of bytes in transmit buffer
1379 */
1380 static int chars_in_buffer(struct tty_struct *tty)
1381 {
1382 struct slgt_info *info = tty->driver_data;
1383 if (sanity_check(info, tty->name, "chars_in_buffer"))
1384 return 0;
1385 DBGINFO(("%s chars_in_buffer()=%d\n", info->device_name, info->tx_count));
1386 return info->tx_count;
1387 }
1388
1389 /*
1390 * signal remote device to throttle send data (our receive data)
1391 */
1392 static void throttle(struct tty_struct * tty)
1393 {
1394 struct slgt_info *info = tty->driver_data;
1395 unsigned long flags;
1396
1397 if (sanity_check(info, tty->name, "throttle"))
1398 return;
1399 DBGINFO(("%s throttle\n", info->device_name));
1400 if (I_IXOFF(tty))
1401 send_xchar(tty, STOP_CHAR(tty));
1402 if (tty->termios->c_cflag & CRTSCTS) {
1403 spin_lock_irqsave(&info->lock,flags);
1404 info->signals &= ~SerialSignal_RTS;
1405 set_signals(info);
1406 spin_unlock_irqrestore(&info->lock,flags);
1407 }
1408 }
1409
1410 /*
1411 * signal remote device to stop throttling send data (our receive data)
1412 */
1413 static void unthrottle(struct tty_struct * tty)
1414 {
1415 struct slgt_info *info = tty->driver_data;
1416 unsigned long flags;
1417
1418 if (sanity_check(info, tty->name, "unthrottle"))
1419 return;
1420 DBGINFO(("%s unthrottle\n", info->device_name));
1421 if (I_IXOFF(tty)) {
1422 if (info->x_char)
1423 info->x_char = 0;
1424 else
1425 send_xchar(tty, START_CHAR(tty));
1426 }
1427 if (tty->termios->c_cflag & CRTSCTS) {
1428 spin_lock_irqsave(&info->lock,flags);
1429 info->signals |= SerialSignal_RTS;
1430 set_signals(info);
1431 spin_unlock_irqrestore(&info->lock,flags);
1432 }
1433 }
1434
1435 /*
1436 * set or clear transmit break condition
1437 * break_state -1=set break condition, 0=clear
1438 */
1439 static void set_break(struct tty_struct *tty, int break_state)
1440 {
1441 struct slgt_info *info = tty->driver_data;
1442 unsigned short value;
1443 unsigned long flags;
1444
1445 if (sanity_check(info, tty->name, "set_break"))
1446 return;
1447 DBGINFO(("%s set_break(%d)\n", info->device_name, break_state));
1448
1449 spin_lock_irqsave(&info->lock,flags);
1450 value = rd_reg16(info, TCR);
1451 if (break_state == -1)
1452 value |= BIT6;
1453 else
1454 value &= ~BIT6;
1455 wr_reg16(info, TCR, value);
1456 spin_unlock_irqrestore(&info->lock,flags);
1457 }
1458
1459 #if SYNCLINK_GENERIC_HDLC
1460
1461 /**
1462 * called by generic HDLC layer when protocol selected (PPP, frame relay, etc.)
1463 * set encoding and frame check sequence (FCS) options
1464 *
1465 * dev pointer to network device structure
1466 * encoding serial encoding setting
1467 * parity FCS setting
1468 *
1469 * returns 0 if success, otherwise error code
1470 */
1471 static int hdlcdev_attach(struct net_device *dev, unsigned short encoding,
1472 unsigned short parity)
1473 {
1474 struct slgt_info *info = dev_to_port(dev);
1475 unsigned char new_encoding;
1476 unsigned short new_crctype;
1477
1478 /* return error if TTY interface open */
1479 if (info->count)
1480 return -EBUSY;
1481
1482 DBGINFO(("%s hdlcdev_attach\n", info->device_name));
1483
1484 switch (encoding)
1485 {
1486 case ENCODING_NRZ: new_encoding = HDLC_ENCODING_NRZ; break;
1487 case ENCODING_NRZI: new_encoding = HDLC_ENCODING_NRZI_SPACE; break;
1488 case ENCODING_FM_MARK: new_encoding = HDLC_ENCODING_BIPHASE_MARK; break;
1489 case ENCODING_FM_SPACE: new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break;
1490 case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break;
1491 default: return -EINVAL;
1492 }
1493
1494 switch (parity)
1495 {
1496 case PARITY_NONE: new_crctype = HDLC_CRC_NONE; break;
1497 case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break;
1498 case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break;
1499 default: return -EINVAL;
1500 }
1501
1502 info->params.encoding = new_encoding;
1503 info->params.crc_type = new_crctype;
1504
1505 /* if network interface up, reprogram hardware */
1506 if (info->netcount)
1507 program_hw(info);
1508
1509 return 0;
1510 }
1511
1512 /**
1513 * called by generic HDLC layer to send frame
1514 *
1515 * skb socket buffer containing HDLC frame
1516 * dev pointer to network device structure
1517 *
1518 * returns 0 if success, otherwise error code
1519 */
1520 static int hdlcdev_xmit(struct sk_buff *skb, struct net_device *dev)
1521 {
1522 struct slgt_info *info = dev_to_port(dev);
1523 struct net_device_stats *stats = hdlc_stats(dev);
1524 unsigned long flags;
1525
1526 DBGINFO(("%s hdlc_xmit\n", dev->name));
1527
1528 /* stop sending until this frame completes */
1529 netif_stop_queue(dev);
1530
1531 /* copy data to device buffers */
1532 info->tx_count = skb->len;
1533 tx_load(info, skb->data, skb->len);
1534
1535 /* update network statistics */
1536 stats->tx_packets++;
1537 stats->tx_bytes += skb->len;
1538
1539 /* done with socket buffer, so free it */
1540 dev_kfree_skb(skb);
1541
1542 /* save start time for transmit timeout detection */
1543 dev->trans_start = jiffies;
1544
1545 /* start hardware transmitter if necessary */
1546 spin_lock_irqsave(&info->lock,flags);
1547 if (!info->tx_active)
1548 tx_start(info);
1549 spin_unlock_irqrestore(&info->lock,flags);
1550
1551 return 0;
1552 }
1553
1554 /**
1555 * called by network layer when interface enabled
1556 * claim resources and initialize hardware
1557 *
1558 * dev pointer to network device structure
1559 *
1560 * returns 0 if success, otherwise error code
1561 */
1562 static int hdlcdev_open(struct net_device *dev)
1563 {
1564 struct slgt_info *info = dev_to_port(dev);
1565 int rc;
1566 unsigned long flags;
1567
1568 if (!try_module_get(THIS_MODULE))
1569 return -EBUSY;
1570
1571 DBGINFO(("%s hdlcdev_open\n", dev->name));
1572
1573 /* generic HDLC layer open processing */
1574 if ((rc = hdlc_open(dev)))
1575 return rc;
1576
1577 /* arbitrate between network and tty opens */
1578 spin_lock_irqsave(&info->netlock, flags);
1579 if (info->count != 0 || info->netcount != 0) {
1580 DBGINFO(("%s hdlc_open busy\n", dev->name));
1581 spin_unlock_irqrestore(&info->netlock, flags);
1582 return -EBUSY;
1583 }
1584 info->netcount=1;
1585 spin_unlock_irqrestore(&info->netlock, flags);
1586
1587 /* claim resources and init adapter */
1588 if ((rc = startup(info)) != 0) {
1589 spin_lock_irqsave(&info->netlock, flags);
1590 info->netcount=0;
1591 spin_unlock_irqrestore(&info->netlock, flags);
1592 return rc;
1593 }
1594
1595 /* assert DTR and RTS, apply hardware settings */
1596 info->signals |= SerialSignal_RTS + SerialSignal_DTR;
1597 program_hw(info);
1598
1599 /* enable network layer transmit */
1600 dev->trans_start = jiffies;
1601 netif_start_queue(dev);
1602
1603 /* inform generic HDLC layer of current DCD status */
1604 spin_lock_irqsave(&info->lock, flags);
1605 get_signals(info);
1606 spin_unlock_irqrestore(&info->lock, flags);
1607 if (info->signals & SerialSignal_DCD)
1608 netif_carrier_on(dev);
1609 else
1610 netif_carrier_off(dev);
1611 return 0;
1612 }
1613
1614 /**
1615 * called by network layer when interface is disabled
1616 * shutdown hardware and release resources
1617 *
1618 * dev pointer to network device structure
1619 *
1620 * returns 0 if success, otherwise error code
1621 */
1622 static int hdlcdev_close(struct net_device *dev)
1623 {
1624 struct slgt_info *info = dev_to_port(dev);
1625 unsigned long flags;
1626
1627 DBGINFO(("%s hdlcdev_close\n", dev->name));
1628
1629 netif_stop_queue(dev);
1630
1631 /* shutdown adapter and release resources */
1632 shutdown(info);
1633
1634 hdlc_close(dev);
1635
1636 spin_lock_irqsave(&info->netlock, flags);
1637 info->netcount=0;
1638 spin_unlock_irqrestore(&info->netlock, flags);
1639
1640 module_put(THIS_MODULE);
1641 return 0;
1642 }
1643
1644 /**
1645 * called by network layer to process IOCTL call to network device
1646 *
1647 * dev pointer to network device structure
1648 * ifr pointer to network interface request structure
1649 * cmd IOCTL command code
1650 *
1651 * returns 0 if success, otherwise error code
1652 */
1653 static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
1654 {
1655 const size_t size = sizeof(sync_serial_settings);
1656 sync_serial_settings new_line;
1657 sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
1658 struct slgt_info *info = dev_to_port(dev);
1659 unsigned int flags;
1660
1661 DBGINFO(("%s hdlcdev_ioctl\n", dev->name));
1662
1663 /* return error if TTY interface open */
1664 if (info->count)
1665 return -EBUSY;
1666
1667 if (cmd != SIOCWANDEV)
1668 return hdlc_ioctl(dev, ifr, cmd);
1669
1670 switch(ifr->ifr_settings.type) {
1671 case IF_GET_IFACE: /* return current sync_serial_settings */
1672
1673 ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
1674 if (ifr->ifr_settings.size < size) {
1675 ifr->ifr_settings.size = size; /* data size wanted */
1676 return -ENOBUFS;
1677 }
1678
1679 flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1680 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
1681 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1682 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
1683
1684 switch (flags){
1685 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break;
1686 case (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_INT; break;
1687 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_TXINT; break;
1688 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break;
1689 default: new_line.clock_type = CLOCK_DEFAULT;
1690 }
1691
1692 new_line.clock_rate = info->params.clock_speed;
1693 new_line.loopback = info->params.loopback ? 1:0;
1694
1695 if (copy_to_user(line, &new_line, size))
1696 return -EFAULT;
1697 return 0;
1698
1699 case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */
1700
1701 if(!capable(CAP_NET_ADMIN))
1702 return -EPERM;
1703 if (copy_from_user(&new_line, line, size))
1704 return -EFAULT;
1705
1706 switch (new_line.clock_type)
1707 {
1708 case CLOCK_EXT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break;
1709 case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break;
1710 case CLOCK_INT: flags = HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG; break;
1711 case CLOCK_TXINT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG; break;
1712 case CLOCK_DEFAULT: flags = info->params.flags &
1713 (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1714 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
1715 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1716 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); break;
1717 default: return -EINVAL;
1718 }
1719
1720 if (new_line.loopback != 0 && new_line.loopback != 1)
1721 return -EINVAL;
1722
1723 info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1724 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
1725 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1726 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
1727 info->params.flags |= flags;
1728
1729 info->params.loopback = new_line.loopback;
1730
1731 if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG))
1732 info->params.clock_speed = new_line.clock_rate;
1733 else
1734 info->params.clock_speed = 0;
1735
1736 /* if network interface up, reprogram hardware */
1737 if (info->netcount)
1738 program_hw(info);
1739 return 0;
1740
1741 default:
1742 return hdlc_ioctl(dev, ifr, cmd);
1743 }
1744 }
1745
1746 /**
1747 * called by network layer when transmit timeout is detected
1748 *
1749 * dev pointer to network device structure
1750 */
1751 static void hdlcdev_tx_timeout(struct net_device *dev)
1752 {
1753 struct slgt_info *info = dev_to_port(dev);
1754 struct net_device_stats *stats = hdlc_stats(dev);
1755 unsigned long flags;
1756
1757 DBGINFO(("%s hdlcdev_tx_timeout\n", dev->name));
1758
1759 stats->tx_errors++;
1760 stats->tx_aborted_errors++;
1761
1762 spin_lock_irqsave(&info->lock,flags);
1763 tx_stop(info);
1764 spin_unlock_irqrestore(&info->lock,flags);
1765
1766 netif_wake_queue(dev);
1767 }
1768
1769 /**
1770 * called by device driver when transmit completes
1771 * reenable network layer transmit if stopped
1772 *
1773 * info pointer to device instance information
1774 */
1775 static void hdlcdev_tx_done(struct slgt_info *info)
1776 {
1777 if (netif_queue_stopped(info->netdev))
1778 netif_wake_queue(info->netdev);
1779 }
1780
1781 /**
1782 * called by device driver when frame received
1783 * pass frame to network layer
1784 *
1785 * info pointer to device instance information
1786 * buf pointer to buffer contianing frame data
1787 * size count of data bytes in buf
1788 */
1789 static void hdlcdev_rx(struct slgt_info *info, char *buf, int size)
1790 {
1791 struct sk_buff *skb = dev_alloc_skb(size);
1792 struct net_device *dev = info->netdev;
1793 struct net_device_stats *stats = hdlc_stats(dev);
1794
1795 DBGINFO(("%s hdlcdev_rx\n", dev->name));
1796
1797 if (skb == NULL) {
1798 DBGERR(("%s: can't alloc skb, drop packet\n", dev->name));
1799 stats->rx_dropped++;
1800 return;
1801 }
1802
1803 memcpy(skb_put(skb, size),buf,size);
1804
1805 skb->protocol = hdlc_type_trans(skb, info->netdev);
1806
1807 stats->rx_packets++;
1808 stats->rx_bytes += size;
1809
1810 netif_rx(skb);
1811
1812 info->netdev->last_rx = jiffies;
1813 }
1814
1815 /**
1816 * called by device driver when adding device instance
1817 * do generic HDLC initialization
1818 *
1819 * info pointer to device instance information
1820 *
1821 * returns 0 if success, otherwise error code
1822 */
1823 static int hdlcdev_init(struct slgt_info *info)
1824 {
1825 int rc;
1826 struct net_device *dev;
1827 hdlc_device *hdlc;
1828
1829 /* allocate and initialize network and HDLC layer objects */
1830
1831 if (!(dev = alloc_hdlcdev(info))) {
1832 printk(KERN_ERR "%s hdlc device alloc failure\n", info->device_name);
1833 return -ENOMEM;
1834 }
1835
1836 /* for network layer reporting purposes only */
1837 dev->mem_start = info->phys_reg_addr;
1838 dev->mem_end = info->phys_reg_addr + SLGT_REG_SIZE - 1;
1839 dev->irq = info->irq_level;
1840
1841 /* network layer callbacks and settings */
1842 dev->do_ioctl = hdlcdev_ioctl;
1843 dev->open = hdlcdev_open;
1844 dev->stop = hdlcdev_close;
1845 dev->tx_timeout = hdlcdev_tx_timeout;
1846 dev->watchdog_timeo = 10*HZ;
1847 dev->tx_queue_len = 50;
1848
1849 /* generic HDLC layer callbacks and settings */
1850 hdlc = dev_to_hdlc(dev);
1851 hdlc->attach = hdlcdev_attach;
1852 hdlc->xmit = hdlcdev_xmit;
1853
1854 /* register objects with HDLC layer */
1855 if ((rc = register_hdlc_device(dev))) {
1856 printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__);
1857 free_netdev(dev);
1858 return rc;
1859 }
1860
1861 info->netdev = dev;
1862 return 0;
1863 }
1864
1865 /**
1866 * called by device driver when removing device instance
1867 * do generic HDLC cleanup
1868 *
1869 * info pointer to device instance information
1870 */
1871 static void hdlcdev_exit(struct slgt_info *info)
1872 {
1873 unregister_hdlc_device(info->netdev);
1874 free_netdev(info->netdev);
1875 info->netdev = NULL;
1876 }
1877
1878 #endif /* ifdef CONFIG_HDLC */
1879
1880 /*
1881 * get async data from rx DMA buffers
1882 */
1883 static void rx_async(struct slgt_info *info)
1884 {
1885 struct tty_struct *tty = info->tty;
1886 struct mgsl_icount *icount = &info->icount;
1887 unsigned int start, end;
1888 unsigned char *p;
1889 unsigned char status;
1890 struct slgt_desc *bufs = info->rbufs;
1891 int i, count;
1892 int chars = 0;
1893 int stat;
1894 unsigned char ch;
1895
1896 start = end = info->rbuf_current;
1897
1898 while(desc_complete(bufs[end])) {
1899 count = desc_count(bufs[end]) - info->rbuf_index;
1900 p = bufs[end].buf + info->rbuf_index;
1901
1902 DBGISR(("%s rx_async count=%d\n", info->device_name, count));
1903 DBGDATA(info, p, count, "rx");
1904
1905 for(i=0 ; i < count; i+=2, p+=2) {
1906 ch = *p;
1907 icount->rx++;
1908
1909 stat = 0;
1910
1911 if ((status = *(p+1) & (BIT1 + BIT0))) {
1912 if (status & BIT1)
1913 icount->parity++;
1914 else if (status & BIT0)
1915 icount->frame++;
1916 /* discard char if tty control flags say so */
1917 if (status & info->ignore_status_mask)
1918 continue;
1919 if (status & BIT1)
1920 stat = TTY_PARITY;
1921 else if (status & BIT0)
1922 stat = TTY_FRAME;
1923 }
1924 if (tty) {
1925 tty_insert_flip_char(tty, ch, stat);
1926 chars++;
1927 }
1928 }
1929
1930 if (i < count) {
1931 /* receive buffer not completed */
1932 info->rbuf_index += i;
1933 mod_timer(&info->rx_timer, jiffies + 1);
1934 break;
1935 }
1936
1937 info->rbuf_index = 0;
1938 free_rbufs(info, end, end);
1939
1940 if (++end == info->rbuf_count)
1941 end = 0;
1942
1943 /* if entire list searched then no frame available */
1944 if (end == start)
1945 break;
1946 }
1947
1948 if (tty && chars)
1949 tty_flip_buffer_push(tty);
1950 }
1951
1952 /*
1953 * return next bottom half action to perform
1954 */
1955 static int bh_action(struct slgt_info *info)
1956 {
1957 unsigned long flags;
1958 int rc;
1959
1960 spin_lock_irqsave(&info->lock,flags);
1961
1962 if (info->pending_bh & BH_RECEIVE) {
1963 info->pending_bh &= ~BH_RECEIVE;
1964 rc = BH_RECEIVE;
1965 } else if (info->pending_bh & BH_TRANSMIT) {
1966 info->pending_bh &= ~BH_TRANSMIT;
1967 rc = BH_TRANSMIT;
1968 } else if (info->pending_bh & BH_STATUS) {
1969 info->pending_bh &= ~BH_STATUS;
1970 rc = BH_STATUS;
1971 } else {
1972 /* Mark BH routine as complete */
1973 info->bh_running = 0;
1974 info->bh_requested = 0;
1975 rc = 0;
1976 }
1977
1978 spin_unlock_irqrestore(&info->lock,flags);
1979
1980 return rc;
1981 }
1982
1983 /*
1984 * perform bottom half processing
1985 */
1986 static void bh_handler(struct work_struct *work)
1987 {
1988 struct slgt_info *info = container_of(work, struct slgt_info, task);
1989 int action;
1990
1991 if (!info)
1992 return;
1993 info->bh_running = 1;
1994
1995 while((action = bh_action(info))) {
1996 switch (action) {
1997 case BH_RECEIVE:
1998 DBGBH(("%s bh receive\n", info->device_name));
1999 switch(info->params.mode) {
2000 case MGSL_MODE_ASYNC:
2001 rx_async(info);
2002 break;
2003 case MGSL_MODE_HDLC:
2004 while(rx_get_frame(info));
2005 break;
2006 case MGSL_MODE_RAW:
2007 case MGSL_MODE_MONOSYNC:
2008 case MGSL_MODE_BISYNC:
2009 while(rx_get_buf(info));
2010 break;
2011 }
2012 /* restart receiver if rx DMA buffers exhausted */
2013 if (info->rx_restart)
2014 rx_start(info);
2015 break;
2016 case BH_TRANSMIT:
2017 bh_transmit(info);
2018 break;
2019 case BH_STATUS:
2020 DBGBH(("%s bh status\n", info->device_name));
2021 info->ri_chkcount = 0;
2022 info->dsr_chkcount = 0;
2023 info->dcd_chkcount = 0;
2024 info->cts_chkcount = 0;
2025 break;
2026 default:
2027 DBGBH(("%s unknown action\n", info->device_name));
2028 break;
2029 }
2030 }
2031 DBGBH(("%s bh_handler exit\n", info->device_name));
2032 }
2033
2034 static void bh_transmit(struct slgt_info *info)
2035 {
2036 struct tty_struct *tty = info->tty;
2037
2038 DBGBH(("%s bh_transmit\n", info->device_name));
2039 if (tty)
2040 tty_wakeup(tty);
2041 }
2042
2043 static void dsr_change(struct slgt_info *info)
2044 {
2045 get_signals(info);
2046 DBGISR(("dsr_change %s signals=%04X\n", info->device_name, info->signals));
2047 if ((info->dsr_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) {
2048 slgt_irq_off(info, IRQ_DSR);
2049 return;
2050 }
2051 info->icount.dsr++;
2052 if (info->signals & SerialSignal_DSR)
2053 info->input_signal_events.dsr_up++;
2054 else
2055 info->input_signal_events.dsr_down++;
2056 wake_up_interruptible(&info->status_event_wait_q);
2057 wake_up_interruptible(&info->event_wait_q);
2058 info->pending_bh |= BH_STATUS;
2059 }
2060
2061 static void cts_change(struct slgt_info *info)
2062 {
2063 get_signals(info);
2064 DBGISR(("cts_change %s signals=%04X\n", info->device_name, info->signals));
2065 if ((info->cts_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) {
2066 slgt_irq_off(info, IRQ_CTS);
2067 return;
2068 }
2069 info->icount.cts++;
2070 if (info->signals & SerialSignal_CTS)
2071 info->input_signal_events.cts_up++;
2072 else
2073 info->input_signal_events.cts_down++;
2074 wake_up_interruptible(&info->status_event_wait_q);
2075 wake_up_interruptible(&info->event_wait_q);
2076 info->pending_bh |= BH_STATUS;
2077
2078 if (info->flags & ASYNC_CTS_FLOW) {
2079 if (info->tty) {
2080 if (info->tty->hw_stopped) {
2081 if (info->signals & SerialSignal_CTS) {
2082 info->tty->hw_stopped = 0;
2083 info->pending_bh |= BH_TRANSMIT;
2084 return;
2085 }
2086 } else {
2087 if (!(info->signals & SerialSignal_CTS))
2088 info->tty->hw_stopped = 1;
2089 }
2090 }
2091 }
2092 }
2093
2094 static void dcd_change(struct slgt_info *info)
2095 {
2096 get_signals(info);
2097 DBGISR(("dcd_change %s signals=%04X\n", info->device_name, info->signals));
2098 if ((info->dcd_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) {
2099 slgt_irq_off(info, IRQ_DCD);
2100 return;
2101 }
2102 info->icount.dcd++;
2103 if (info->signals & SerialSignal_DCD) {
2104 info->input_signal_events.dcd_up++;
2105 } else {
2106 info->input_signal_events.dcd_down++;
2107 }
2108 #if SYNCLINK_GENERIC_HDLC
2109 if (info->netcount) {
2110 if (info->signals & SerialSignal_DCD)
2111 netif_carrier_on(info->netdev);
2112 else
2113 netif_carrier_off(info->netdev);
2114 }
2115 #endif
2116 wake_up_interruptible(&info->status_event_wait_q);
2117 wake_up_interruptible(&info->event_wait_q);
2118 info->pending_bh |= BH_STATUS;
2119
2120 if (info->flags & ASYNC_CHECK_CD) {
2121 if (info->signals & SerialSignal_DCD)
2122 wake_up_interruptible(&info->open_wait);
2123 else {
2124 if (info->tty)
2125 tty_hangup(info->tty);
2126 }
2127 }
2128 }
2129
2130 static void ri_change(struct slgt_info *info)
2131 {
2132 get_signals(info);
2133 DBGISR(("ri_change %s signals=%04X\n", info->device_name, info->signals));
2134 if ((info->ri_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) {
2135 slgt_irq_off(info, IRQ_RI);
2136 return;
2137 }
2138 info->icount.dcd++;
2139 if (info->signals & SerialSignal_RI) {
2140 info->input_signal_events.ri_up++;
2141 } else {
2142 info->input_signal_events.ri_down++;
2143 }
2144 wake_up_interruptible(&info->status_event_wait_q);
2145 wake_up_interruptible(&info->event_wait_q);
2146 info->pending_bh |= BH_STATUS;
2147 }
2148
2149 static void isr_serial(struct slgt_info *info)
2150 {
2151 unsigned short status = rd_reg16(info, SSR);
2152
2153 DBGISR(("%s isr_serial status=%04X\n", info->device_name, status));
2154
2155 wr_reg16(info, SSR, status); /* clear pending */
2156
2157 info->irq_occurred = 1;
2158
2159 if (info->params.mode == MGSL_MODE_ASYNC) {
2160 if (status & IRQ_TXIDLE) {
2161 if (info->tx_count)
2162 isr_txeom(info, status);
2163 }
2164 if ((status & IRQ_RXBREAK) && (status & RXBREAK)) {
2165 info->icount.brk++;
2166 /* process break detection if tty control allows */
2167 if (info->tty) {
2168 if (!(status & info->ignore_status_mask)) {
2169 if (info->read_status_mask & MASK_BREAK) {
2170 tty_insert_flip_char(info->tty, 0, TTY_BREAK);
2171 if (info->flags & ASYNC_SAK)
2172 do_SAK(info->tty);
2173 }
2174 }
2175 }
2176 }
2177 } else {
2178 if (status & (IRQ_TXIDLE + IRQ_TXUNDER))
2179 isr_txeom(info, status);
2180
2181 if (status & IRQ_RXIDLE) {
2182 if (status & RXIDLE)
2183 info->icount.rxidle++;
2184 else
2185 info->icount.exithunt++;
2186 wake_up_interruptible(&info->event_wait_q);
2187 }
2188
2189 if (status & IRQ_RXOVER)
2190 rx_start(info);
2191 }
2192
2193 if (status & IRQ_DSR)
2194 dsr_change(info);
2195 if (status & IRQ_CTS)
2196 cts_change(info);
2197 if (status & IRQ_DCD)
2198 dcd_change(info);
2199 if (status & IRQ_RI)
2200 ri_change(info);
2201 }
2202
2203 static void isr_rdma(struct slgt_info *info)
2204 {
2205 unsigned int status = rd_reg32(info, RDCSR);
2206
2207 DBGISR(("%s isr_rdma status=%08x\n", info->device_name, status));
2208
2209 /* RDCSR (rx DMA control/status)
2210 *
2211 * 31..07 reserved
2212 * 06 save status byte to DMA buffer
2213 * 05 error
2214 * 04 eol (end of list)
2215 * 03 eob (end of buffer)
2216 * 02 IRQ enable
2217 * 01 reset
2218 * 00 enable
2219 */
2220 wr_reg32(info, RDCSR, status); /* clear pending */
2221
2222 if (status & (BIT5 + BIT4)) {
2223 DBGISR(("%s isr_rdma rx_restart=1\n", info->device_name));
2224 info->rx_restart = 1;
2225 }
2226 info->pending_bh |= BH_RECEIVE;
2227 }
2228
2229 static void isr_tdma(struct slgt_info *info)
2230 {
2231 unsigned int status = rd_reg32(info, TDCSR);
2232
2233 DBGISR(("%s isr_tdma status=%08x\n", info->device_name, status));
2234
2235 /* TDCSR (tx DMA control/status)
2236 *
2237 * 31..06 reserved
2238 * 05 error
2239 * 04 eol (end of list)
2240 * 03 eob (end of buffer)
2241 * 02 IRQ enable
2242 * 01 reset
2243 * 00 enable
2244 */
2245 wr_reg32(info, TDCSR, status); /* clear pending */
2246
2247 if (status & (BIT5 + BIT4 + BIT3)) {
2248 // another transmit buffer has completed
2249 // run bottom half to get more send data from user
2250 info->pending_bh |= BH_TRANSMIT;
2251 }
2252 }
2253
2254 static void isr_txeom(struct slgt_info *info, unsigned short status)
2255 {
2256 DBGISR(("%s txeom status=%04x\n", info->device_name, status));
2257
2258 slgt_irq_off(info, IRQ_TXDATA + IRQ_TXIDLE + IRQ_TXUNDER);
2259 tdma_reset(info);
2260 reset_tbufs(info);
2261 if (status & IRQ_TXUNDER) {
2262 unsigned short val = rd_reg16(info, TCR);
2263 wr_reg16(info, TCR, (unsigned short)(val | BIT2)); /* set reset bit */
2264 wr_reg16(info, TCR, val); /* clear reset bit */
2265 }
2266
2267 if (info->tx_active) {
2268 if (info->params.mode != MGSL_MODE_ASYNC) {
2269 if (status & IRQ_TXUNDER)
2270 info->icount.txunder++;
2271 else if (status & IRQ_TXIDLE)
2272 info->icount.txok++;
2273 }
2274
2275 info->tx_active = 0;
2276 info->tx_count = 0;
2277
2278 del_timer(&info->tx_timer);
2279
2280 if (info->params.mode != MGSL_MODE_ASYNC && info->drop_rts_on_tx_done) {
2281 info->signals &= ~SerialSignal_RTS;
2282 info->drop_rts_on_tx_done = 0;
2283 set_signals(info);
2284 }
2285
2286 #if SYNCLINK_GENERIC_HDLC
2287 if (info->netcount)
2288 hdlcdev_tx_done(info);
2289 else
2290 #endif
2291 {
2292 if (info->tty && (info->tty->stopped || info->tty->hw_stopped)) {
2293 tx_stop(info);
2294 return;
2295 }
2296 info->pending_bh |= BH_TRANSMIT;
2297 }
2298 }
2299 }
2300
2301 static void isr_gpio(struct slgt_info *info, unsigned int changed, unsigned int state)
2302 {
2303 struct cond_wait *w, *prev;
2304
2305 /* wake processes waiting for specific transitions */
2306 for (w = info->gpio_wait_q, prev = NULL ; w != NULL ; w = w->next) {
2307 if (w->data & changed) {
2308 w->data = state;
2309 wake_up_interruptible(&w->q);
2310 if (prev != NULL)
2311 prev->next = w->next;
2312 else
2313 info->gpio_wait_q = w->next;
2314 } else
2315 prev = w;
2316 }
2317 }
2318
2319 /* interrupt service routine
2320 *
2321 * irq interrupt number
2322 * dev_id device ID supplied during interrupt registration
2323 */
2324 static irqreturn_t slgt_interrupt(int irq, void *dev_id)
2325 {
2326 struct slgt_info *info;
2327 unsigned int gsr;
2328 unsigned int i;
2329
2330 DBGISR(("slgt_interrupt irq=%d entry\n", irq));
2331
2332 info = dev_id;
2333 if (!info)
2334 return IRQ_NONE;
2335
2336 spin_lock(&info->lock);
2337
2338 while((gsr = rd_reg32(info, GSR) & 0xffffff00)) {
2339 DBGISR(("%s gsr=%08x\n", info->device_name, gsr));
2340 info->irq_occurred = 1;
2341 for(i=0; i < info->port_count ; i++) {
2342 if (info->port_array[i] == NULL)
2343 continue;
2344 if (gsr & (BIT8 << i))
2345 isr_serial(info->port_array[i]);
2346 if (gsr & (BIT16 << (i*2)))
2347 isr_rdma(info->port_array[i]);
2348 if (gsr & (BIT17 << (i*2)))
2349 isr_tdma(info->port_array[i]);
2350 }
2351 }
2352
2353 if (info->gpio_present) {
2354 unsigned int state;
2355 unsigned int changed;
2356 while ((changed = rd_reg32(info, IOSR)) != 0) {
2357 DBGISR(("%s iosr=%08x\n", info->device_name, changed));
2358 /* read latched state of GPIO signals */
2359 state = rd_reg32(info, IOVR);
2360 /* clear pending GPIO interrupt bits */
2361 wr_reg32(info, IOSR, changed);
2362 for (i=0 ; i < info->port_count ; i++) {
2363 if (info->port_array[i] != NULL)
2364 isr_gpio(info->port_array[i], changed, state);
2365 }
2366 }
2367 }
2368
2369 for(i=0; i < info->port_count ; i++) {
2370 struct slgt_info *port = info->port_array[i];
2371
2372 if (port && (port->count || port->netcount) &&
2373 port->pending_bh && !port->bh_running &&
2374 !port->bh_requested) {
2375 DBGISR(("%s bh queued\n", port->device_name));
2376 schedule_work(&port->task);
2377 port->bh_requested = 1;
2378 }
2379 }
2380
2381 spin_unlock(&info->lock);
2382
2383 DBGISR(("slgt_interrupt irq=%d exit\n", irq));
2384 return IRQ_HANDLED;
2385 }
2386
2387 static int startup(struct slgt_info *info)
2388 {
2389 DBGINFO(("%s startup\n", info->device_name));
2390
2391 if (info->flags & ASYNC_INITIALIZED)
2392 return 0;
2393
2394 if (!info->tx_buf) {
2395 info->tx_buf = kmalloc(info->max_frame_size, GFP_KERNEL);
2396 if (!info->tx_buf) {
2397 DBGERR(("%s can't allocate tx buffer\n", info->device_name));
2398 return -ENOMEM;
2399 }
2400 }
2401
2402 info->pending_bh = 0;
2403
2404 memset(&info->icount, 0, sizeof(info->icount));
2405
2406 /* program hardware for current parameters */
2407 change_params(info);
2408
2409 if (info->tty)
2410 clear_bit(TTY_IO_ERROR, &info->tty->flags);
2411
2412 info->flags |= ASYNC_INITIALIZED;
2413
2414 return 0;
2415 }
2416
2417 /*
2418 * called by close() and hangup() to shutdown hardware
2419 */
2420 static void shutdown(struct slgt_info *info)
2421 {
2422 unsigned long flags;
2423
2424 if (!(info->flags & ASYNC_INITIALIZED))
2425 return;
2426
2427 DBGINFO(("%s shutdown\n", info->device_name));
2428
2429 /* clear status wait queue because status changes */
2430 /* can't happen after shutting down the hardware */
2431 wake_up_interruptible(&info->status_event_wait_q);
2432 wake_up_interruptible(&info->event_wait_q);
2433
2434 del_timer_sync(&info->tx_timer);
2435 del_timer_sync(&info->rx_timer);
2436
2437 kfree(info->tx_buf);
2438 info->tx_buf = NULL;
2439
2440 spin_lock_irqsave(&info->lock,flags);
2441
2442 tx_stop(info);
2443 rx_stop(info);
2444
2445 slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
2446
2447 if (!info->tty || info->tty->termios->c_cflag & HUPCL) {
2448 info->signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
2449 set_signals(info);
2450 }
2451
2452 flush_cond_wait(&info->gpio_wait_q);
2453
2454 spin_unlock_irqrestore(&info->lock,flags);
2455
2456 if (info->tty)
2457 set_bit(TTY_IO_ERROR, &info->tty->flags);
2458
2459 info->flags &= ~ASYNC_INITIALIZED;
2460 }
2461
2462 static void program_hw(struct slgt_info *info)
2463 {
2464 unsigned long flags;
2465
2466 spin_lock_irqsave(&info->lock,flags);
2467
2468 rx_stop(info);
2469 tx_stop(info);
2470
2471 if (info->params.mode != MGSL_MODE_ASYNC ||
2472 info->netcount)
2473 sync_mode(info);
2474 else
2475 async_mode(info);
2476
2477 set_signals(info);
2478
2479 info->dcd_chkcount = 0;
2480 info->cts_chkcount = 0;
2481 info->ri_chkcount = 0;
2482 info->dsr_chkcount = 0;
2483
2484 slgt_irq_on(info, IRQ_DCD | IRQ_CTS | IRQ_DSR);
2485 get_signals(info);
2486
2487 if (info->netcount ||
2488 (info->tty && info->tty->termios->c_cflag & CREAD))
2489 rx_start(info);
2490
2491 spin_unlock_irqrestore(&info->lock,flags);
2492 }
2493
2494 /*
2495 * reconfigure adapter based on new parameters
2496 */
2497 static void change_params(struct slgt_info *info)
2498 {
2499 unsigned cflag;
2500 int bits_per_char;
2501
2502 if (!info->tty || !info->tty->termios)
2503 return;
2504 DBGINFO(("%s change_params\n", info->device_name));
2505
2506 cflag = info->tty->termios->c_cflag;
2507
2508 /* if B0 rate (hangup) specified then negate DTR and RTS */
2509 /* otherwise assert DTR and RTS */
2510 if (cflag & CBAUD)
2511 info->signals |= SerialSignal_RTS + SerialSignal_DTR;
2512 else
2513 info->signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
2514
2515 /* byte size and parity */
2516
2517 switch (cflag & CSIZE) {
2518 case CS5: info->params.data_bits = 5; break;
2519 case CS6: info->params.data_bits = 6; break;
2520 case CS7: info->params.data_bits = 7; break;
2521 case CS8: info->params.data_bits = 8; break;
2522 default: info->params.data_bits = 7; break;
2523 }
2524
2525 info->params.stop_bits = (cflag & CSTOPB) ? 2 : 1;
2526
2527 if (cflag & PARENB)
2528 info->params.parity = (cflag & PARODD) ? ASYNC_PARITY_ODD : ASYNC_PARITY_EVEN;
2529 else
2530 info->params.parity = ASYNC_PARITY_NONE;
2531
2532 /* calculate number of jiffies to transmit a full
2533 * FIFO (32 bytes) at specified data rate
2534 */
2535 bits_per_char = info->params.data_bits +
2536 info->params.stop_bits + 1;
2537
2538 info->params.data_rate = tty_get_baud_rate(info->tty);
2539
2540 if (info->params.data_rate) {
2541 info->timeout = (32*HZ*bits_per_char) /
2542 info->params.data_rate;
2543 }
2544 info->timeout += HZ/50; /* Add .02 seconds of slop */
2545
2546 if (cflag & CRTSCTS)
2547 info->flags |= ASYNC_CTS_FLOW;
2548 else
2549 info->flags &= ~ASYNC_CTS_FLOW;
2550
2551 if (cflag & CLOCAL)
2552 info->flags &= ~ASYNC_CHECK_CD;
2553 else
2554 info->flags |= ASYNC_CHECK_CD;
2555
2556 /* process tty input control flags */
2557
2558 info->read_status_mask = IRQ_RXOVER;
2559 if (I_INPCK(info->tty))
2560 info->read_status_mask |= MASK_PARITY | MASK_FRAMING;
2561 if (I_BRKINT(info->tty) || I_PARMRK(info->tty))
2562 info->read_status_mask |= MASK_BREAK;
2563 if (I_IGNPAR(info->tty))
2564 info->ignore_status_mask |= MASK_PARITY | MASK_FRAMING;
2565 if (I_IGNBRK(info->tty)) {
2566 info->ignore_status_mask |= MASK_BREAK;
2567 /* If ignoring parity and break indicators, ignore
2568 * overruns too. (For real raw support).
2569 */
2570 if (I_IGNPAR(info->tty))
2571 info->ignore_status_mask |= MASK_OVERRUN;
2572 }
2573
2574 program_hw(info);
2575 }
2576
2577 static int get_stats(struct slgt_info *info, struct mgsl_icount __user *user_icount)
2578 {
2579 DBGINFO(("%s get_stats\n", info->device_name));
2580 if (!user_icount) {
2581 memset(&info->icount, 0, sizeof(info->icount));
2582 } else {
2583 if (copy_to_user(user_icount, &info->icount, sizeof(struct mgsl_icount)))
2584 return -EFAULT;
2585 }
2586 return 0;
2587 }
2588
2589 static int get_params(struct slgt_info *info, MGSL_PARAMS __user *user_params)
2590 {
2591 DBGINFO(("%s get_params\n", info->device_name));
2592 if (copy_to_user(user_params, &info->params, sizeof(MGSL_PARAMS)))
2593 return -EFAULT;
2594 return 0;
2595 }
2596
2597 static int set_params(struct slgt_info *info, MGSL_PARAMS __user *new_params)
2598 {
2599 unsigned long flags;
2600 MGSL_PARAMS tmp_params;
2601
2602 DBGINFO(("%s set_params\n", info->device_name));
2603 if (copy_from_user(&tmp_params, new_params, sizeof(MGSL_PARAMS)))
2604 return -EFAULT;
2605
2606 spin_lock_irqsave(&info->lock, flags);
2607 memcpy(&info->params, &tmp_params, sizeof(MGSL_PARAMS));
2608 spin_unlock_irqrestore(&info->lock, flags);
2609
2610 change_params(info);
2611
2612 return 0;
2613 }
2614
2615 static int get_txidle(struct slgt_info *info, int __user *idle_mode)
2616 {
2617 DBGINFO(("%s get_txidle=%d\n", info->device_name, info->idle_mode));
2618 if (put_user(info->idle_mode, idle_mode))
2619 return -EFAULT;
2620 return 0;
2621 }
2622
2623 static int set_txidle(struct slgt_info *info, int idle_mode)
2624 {
2625 unsigned long flags;
2626 DBGINFO(("%s set_txidle(%d)\n", info->device_name, idle_mode));
2627 spin_lock_irqsave(&info->lock,flags);
2628 info->idle_mode = idle_mode;
2629 if (info->params.mode != MGSL_MODE_ASYNC)
2630 tx_set_idle(info);
2631 spin_unlock_irqrestore(&info->lock,flags);
2632 return 0;
2633 }
2634
2635 static int tx_enable(struct slgt_info *info, int enable)
2636 {
2637 unsigned long flags;
2638 DBGINFO(("%s tx_enable(%d)\n", info->device_name, enable));
2639 spin_lock_irqsave(&info->lock,flags);
2640 if (enable) {
2641 if (!info->tx_enabled)
2642 tx_start(info);
2643 } else {
2644 if (info->tx_enabled)
2645 tx_stop(info);
2646 }
2647 spin_unlock_irqrestore(&info->lock,flags);
2648 return 0;
2649 }
2650
2651 /*
2652 * abort transmit HDLC frame
2653 */
2654 static int tx_abort(struct slgt_info *info)
2655 {
2656 unsigned long flags;
2657 DBGINFO(("%s tx_abort\n", info->device_name));
2658 spin_lock_irqsave(&info->lock,flags);
2659 tdma_reset(info);
2660 spin_unlock_irqrestore(&info->lock,flags);
2661 return 0;
2662 }
2663
2664 static int rx_enable(struct slgt_info *info, int enable)
2665 {
2666 unsigned long flags;
2667 DBGINFO(("%s rx_enable(%d)\n", info->device_name, enable));
2668 spin_lock_irqsave(&info->lock,flags);
2669 if (enable) {
2670 if (!info->rx_enabled)
2671 rx_start(info);
2672 else if (enable == 2) {
2673 /* force hunt mode (write 1 to RCR[3]) */
2674 wr_reg16(info, RCR, rd_reg16(info, RCR) | BIT3);
2675 }
2676 } else {
2677 if (info->rx_enabled)
2678 rx_stop(info);
2679 }
2680 spin_unlock_irqrestore(&info->lock,flags);
2681 return 0;
2682 }
2683
2684 /*
2685 * wait for specified event to occur
2686 */
2687 static int wait_mgsl_event(struct slgt_info *info, int __user *mask_ptr)
2688 {
2689 unsigned long flags;
2690 int s;
2691 int rc=0;
2692 struct mgsl_icount cprev, cnow;
2693 int events;
2694 int mask;
2695 struct _input_signal_events oldsigs, newsigs;
2696 DECLARE_WAITQUEUE(wait, current);
2697
2698 if (get_user(mask, mask_ptr))
2699 return -EFAULT;
2700
2701 DBGINFO(("%s wait_mgsl_event(%d)\n", info->device_name, mask));
2702
2703 spin_lock_irqsave(&info->lock,flags);
2704
2705 /* return immediately if state matches requested events */
2706 get_signals(info);
2707 s = info->signals;
2708
2709 events = mask &
2710 ( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) +
2711 ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) +
2712 ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) +
2713 ((s & SerialSignal_RI) ? MgslEvent_RiActive :MgslEvent_RiInactive) );
2714 if (events) {
2715 spin_unlock_irqrestore(&info->lock,flags);
2716 goto exit;
2717 }
2718
2719 /* save current irq counts */
2720 cprev = info->icount;
2721 oldsigs = info->input_signal_events;
2722
2723 /* enable hunt and idle irqs if needed */
2724 if (mask & (MgslEvent_ExitHuntMode+MgslEvent_IdleReceived)) {
2725 unsigned short val = rd_reg16(info, SCR);
2726 if (!(val & IRQ_RXIDLE))
2727 wr_reg16(info, SCR, (unsigned short)(val | IRQ_RXIDLE));
2728 }
2729
2730 set_current_state(TASK_INTERRUPTIBLE);
2731 add_wait_queue(&info->event_wait_q, &wait);
2732
2733 spin_unlock_irqrestore(&info->lock,flags);
2734
2735 for(;;) {
2736 schedule();
2737 if (signal_pending(current)) {
2738 rc = -ERESTARTSYS;
2739 break;
2740 }
2741
2742 /* get current irq counts */
2743 spin_lock_irqsave(&info->lock,flags);
2744 cnow = info->icount;
2745 newsigs = info->input_signal_events;
2746 set_current_state(TASK_INTERRUPTIBLE);
2747 spin_unlock_irqrestore(&info->lock,flags);
2748
2749 /* if no change, wait aborted for some reason */
2750 if (newsigs.dsr_up == oldsigs.dsr_up &&
2751 newsigs.dsr_down == oldsigs.dsr_down &&
2752 newsigs.dcd_up == oldsigs.dcd_up &&
2753 newsigs.dcd_down == oldsigs.dcd_down &&
2754 newsigs.cts_up == oldsigs.cts_up &&
2755 newsigs.cts_down == oldsigs.cts_down &&
2756 newsigs.ri_up == oldsigs.ri_up &&
2757 newsigs.ri_down == oldsigs.ri_down &&
2758 cnow.exithunt == cprev.exithunt &&
2759 cnow.rxidle == cprev.rxidle) {
2760 rc = -EIO;
2761 break;
2762 }
2763
2764 events = mask &
2765 ( (newsigs.dsr_up != oldsigs.dsr_up ? MgslEvent_DsrActive:0) +
2766 (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) +
2767 (newsigs.dcd_up != oldsigs.dcd_up ? MgslEvent_DcdActive:0) +
2768 (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) +
2769 (newsigs.cts_up != oldsigs.cts_up ? MgslEvent_CtsActive:0) +
2770 (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) +
2771 (newsigs.ri_up != oldsigs.ri_up ? MgslEvent_RiActive:0) +
2772 (newsigs.ri_down != oldsigs.ri_down ? MgslEvent_RiInactive:0) +
2773 (cnow.exithunt != cprev.exithunt ? MgslEvent_ExitHuntMode:0) +
2774 (cnow.rxidle != cprev.rxidle ? MgslEvent_IdleReceived:0) );
2775 if (events)
2776 break;
2777
2778 cprev = cnow;
2779 oldsigs = newsigs;
2780 }
2781
2782 remove_wait_queue(&info->event_wait_q, &wait);
2783 set_current_state(TASK_RUNNING);
2784
2785
2786 if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) {
2787 spin_lock_irqsave(&info->lock,flags);
2788 if (!waitqueue_active(&info->event_wait_q)) {
2789 /* disable enable exit hunt mode/idle rcvd IRQs */
2790 wr_reg16(info, SCR,
2791 (unsigned short)(rd_reg16(info, SCR) & ~IRQ_RXIDLE));
2792 }
2793 spin_unlock_irqrestore(&info->lock,flags);
2794 }
2795 exit:
2796 if (rc == 0)
2797 rc = put_user(events, mask_ptr);
2798 return rc;
2799 }
2800
2801 static int get_interface(struct slgt_info *info, int __user *if_mode)
2802 {
2803 DBGINFO(("%s get_interface=%x\n", info->device_name, info->if_mode));
2804 if (put_user(info->if_mode, if_mode))
2805 return -EFAULT;
2806 return 0;
2807 }
2808
2809 static int set_interface(struct slgt_info *info, int if_mode)
2810 {
2811 unsigned long flags;
2812 unsigned short val;
2813
2814 DBGINFO(("%s set_interface=%x)\n", info->device_name, if_mode));
2815 spin_lock_irqsave(&info->lock,flags);
2816 info->if_mode = if_mode;
2817
2818 msc_set_vcr(info);
2819
2820 /* TCR (tx control) 07 1=RTS driver control */
2821 val = rd_reg16(info, TCR);
2822 if (info->if_mode & MGSL_INTERFACE_RTS_EN)
2823 val |= BIT7;
2824 else
2825 val &= ~BIT7;
2826 wr_reg16(info, TCR, val);
2827
2828 spin_unlock_irqrestore(&info->lock,flags);
2829 return 0;
2830 }
2831
2832 /*
2833 * set general purpose IO pin state and direction
2834 *
2835 * user_gpio fields:
2836 * state each bit indicates a pin state
2837 * smask set bit indicates pin state to set
2838 * dir each bit indicates a pin direction (0=input, 1=output)
2839 * dmask set bit indicates pin direction to set
2840 */
2841 static int set_gpio(struct slgt_info *info, struct gpio_desc __user *user_gpio)
2842 {
2843 unsigned long flags;
2844 struct gpio_desc gpio;
2845 __u32 data;
2846
2847 if (!info->gpio_present)
2848 return -EINVAL;
2849 if (copy_from_user(&gpio, user_gpio, sizeof(gpio)))
2850 return -EFAULT;
2851 DBGINFO(("%s set_gpio state=%08x smask=%08x dir=%08x dmask=%08x\n",
2852 info->device_name, gpio.state, gpio.smask,
2853 gpio.dir, gpio.dmask));
2854
2855 spin_lock_irqsave(&info->lock,flags);
2856 if (gpio.dmask) {
2857 data = rd_reg32(info, IODR);
2858 data |= gpio.dmask & gpio.dir;
2859 data &= ~(gpio.dmask & ~gpio.dir);
2860 wr_reg32(info, IODR, data);
2861 }
2862 if (gpio.smask) {
2863 data = rd_reg32(info, IOVR);
2864 data |= gpio.smask & gpio.state;
2865 data &= ~(gpio.smask & ~gpio.state);
2866 wr_reg32(info, IOVR, data);
2867 }
2868 spin_unlock_irqrestore(&info->lock,flags);
2869
2870 return 0;
2871 }
2872
2873 /*
2874 * get general purpose IO pin state and direction
2875 */
2876 static int get_gpio(struct slgt_info *info, struct gpio_desc __user *user_gpio)
2877 {
2878 struct gpio_desc gpio;
2879 if (!info->gpio_present)
2880 return -EINVAL;
2881 gpio.state = rd_reg32(info, IOVR);
2882 gpio.smask = 0xffffffff;
2883 gpio.dir = rd_reg32(info, IODR);
2884 gpio.dmask = 0xffffffff;
2885 if (copy_to_user(user_gpio, &gpio, sizeof(gpio)))
2886 return -EFAULT;
2887 DBGINFO(("%s get_gpio state=%08x dir=%08x\n",
2888 info->device_name, gpio.state, gpio.dir));
2889 return 0;
2890 }
2891
2892 /*
2893 * conditional wait facility
2894 */
2895 static void init_cond_wait(struct cond_wait *w, unsigned int data)
2896 {
2897 init_waitqueue_head(&w->q);
2898 init_waitqueue_entry(&w->wait, current);
2899 w->data = data;
2900 }
2901
2902 static void add_cond_wait(struct cond_wait **head, struct cond_wait *w)
2903 {
2904 set_current_state(TASK_INTERRUPTIBLE);
2905 add_wait_queue(&w->q, &w->wait);
2906 w->next = *head;
2907 *head = w;
2908 }
2909
2910 static void remove_cond_wait(struct cond_wait **head, struct cond_wait *cw)
2911 {
2912 struct cond_wait *w, *prev;
2913 remove_wait_queue(&cw->q, &cw->wait);
2914 set_current_state(TASK_RUNNING);
2915 for (w = *head, prev = NULL ; w != NULL ; prev = w, w = w->next) {
2916 if (w == cw) {
2917 if (prev != NULL)
2918 prev->next = w->next;
2919 else
2920 *head = w->next;
2921 break;
2922 }
2923 }
2924 }
2925
2926 static void flush_cond_wait(struct cond_wait **head)
2927 {
2928 while (*head != NULL) {
2929 wake_up_interruptible(&(*head)->q);
2930 *head = (*head)->next;
2931 }
2932 }
2933
2934 /*
2935 * wait for general purpose I/O pin(s) to enter specified state
2936 *
2937 * user_gpio fields:
2938 * state - bit indicates target pin state
2939 * smask - set bit indicates watched pin
2940 *
2941 * The wait ends when at least one watched pin enters the specified
2942 * state. When 0 (no error) is returned, user_gpio->state is set to the
2943 * state of all GPIO pins when the wait ends.
2944 *
2945 * Note: Each pin may be a dedicated input, dedicated output, or
2946 * configurable input/output. The number and configuration of pins
2947 * varies with the specific adapter model. Only input pins (dedicated
2948 * or configured) can be monitored with this function.
2949 */
2950 static int wait_gpio(struct slgt_info *info, struct gpio_desc __user *user_gpio)
2951 {
2952 unsigned long flags;
2953 int rc = 0;
2954 struct gpio_desc gpio;
2955 struct cond_wait wait;
2956 u32 state;
2957
2958 if (!info->gpio_present)
2959 return -EINVAL;
2960 if (copy_from_user(&gpio, user_gpio, sizeof(gpio)))
2961 return -EFAULT;
2962 DBGINFO(("%s wait_gpio() state=%08x smask=%08x\n",
2963 info->device_name, gpio.state, gpio.smask));
2964 /* ignore output pins identified by set IODR bit */
2965 if ((gpio.smask &= ~rd_reg32(info, IODR)) == 0)
2966 return -EINVAL;
2967 init_cond_wait(&wait, gpio.smask);
2968
2969 spin_lock_irqsave(&info->lock, flags);
2970 /* enable interrupts for watched pins */
2971 wr_reg32(info, IOER, rd_reg32(info, IOER) | gpio.smask);
2972 /* get current pin states */
2973 state = rd_reg32(info, IOVR);
2974
2975 if (gpio.smask & ~(state ^ gpio.state)) {
2976 /* already in target state */
2977 gpio.state = state;
2978 } else {
2979 /* wait for target state */
2980 add_cond_wait(&info->gpio_wait_q, &wait);
2981 spin_unlock_irqrestore(&info->lock, flags);
2982 schedule();
2983 if (signal_pending(current))
2984 rc = -ERESTARTSYS;
2985 else
2986 gpio.state = wait.data;
2987 spin_lock_irqsave(&info->lock, flags);
2988 remove_cond_wait(&info->gpio_wait_q, &wait);
2989 }
2990
2991 /* disable all GPIO interrupts if no waiting processes */
2992 if (info->gpio_wait_q == NULL)
2993 wr_reg32(info, IOER, 0);
2994 spin_unlock_irqrestore(&info->lock,flags);
2995
2996 if ((rc == 0) && copy_to_user(user_gpio, &gpio, sizeof(gpio)))
2997 rc = -EFAULT;
2998 return rc;
2999 }
3000
3001 static int modem_input_wait(struct slgt_info *info,int arg)
3002 {
3003 unsigned long flags;
3004 int rc;
3005 struct mgsl_icount cprev, cnow;
3006 DECLARE_WAITQUEUE(wait, current);
3007
3008 /* save current irq counts */
3009 spin_lock_irqsave(&info->lock,flags);
3010 cprev = info->icount;
3011 add_wait_queue(&info->status_event_wait_q, &wait);
3012 set_current_state(TASK_INTERRUPTIBLE);
3013 spin_unlock_irqrestore(&info->lock,flags);
3014
3015 for(;;) {
3016 schedule();
3017 if (signal_pending(current)) {
3018 rc = -ERESTARTSYS;
3019 break;
3020 }
3021
3022 /* get new irq counts */
3023 spin_lock_irqsave(&info->lock,flags);
3024 cnow = info->icount;
3025 set_current_state(TASK_INTERRUPTIBLE);
3026 spin_unlock_irqrestore(&info->lock,flags);
3027
3028 /* if no change, wait aborted for some reason */
3029 if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
3030 cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) {
3031 rc = -EIO;
3032 break;
3033 }
3034
3035 /* check for change in caller specified modem input */
3036 if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) ||
3037 (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) ||
3038 (arg & TIOCM_CD && cnow.dcd != cprev.dcd) ||
3039 (arg & TIOCM_CTS && cnow.cts != cprev.cts)) {
3040 rc = 0;
3041 break;
3042 }
3043
3044 cprev = cnow;
3045 }
3046 remove_wait_queue(&info->status_event_wait_q, &wait);
3047 set_current_state(TASK_RUNNING);
3048 return rc;
3049 }
3050
3051 /*
3052 * return state of serial control and status signals
3053 */
3054 static int tiocmget(struct tty_struct *tty, struct file *file)
3055 {
3056 struct slgt_info *info = tty->driver_data;
3057 unsigned int result;
3058 unsigned long flags;
3059
3060 spin_lock_irqsave(&info->lock,flags);
3061 get_signals(info);
3062 spin_unlock_irqrestore(&info->lock,flags);
3063
3064 result = ((info->signals & SerialSignal_RTS) ? TIOCM_RTS:0) +
3065 ((info->signals & SerialSignal_DTR) ? TIOCM_DTR:0) +
3066 ((info->signals & SerialSignal_DCD) ? TIOCM_CAR:0) +
3067 ((info->signals & SerialSignal_RI) ? TIOCM_RNG:0) +
3068 ((info->signals & SerialSignal_DSR) ? TIOCM_DSR:0) +
3069 ((info->signals & SerialSignal_CTS) ? TIOCM_CTS:0);
3070
3071 DBGINFO(("%s tiocmget value=%08X\n", info->device_name, result));
3072 return result;
3073 }
3074
3075 /*
3076 * set modem control signals (DTR/RTS)
3077 *
3078 * cmd signal command: TIOCMBIS = set bit TIOCMBIC = clear bit
3079 * TIOCMSET = set/clear signal values
3080 * value bit mask for command
3081 */
3082 static int tiocmset(struct tty_struct *tty, struct file *file,
3083 unsigned int set, unsigned int clear)
3084 {
3085 struct slgt_info *info = tty->driver_data;
3086 unsigned long flags;
3087
3088 DBGINFO(("%s tiocmset(%x,%x)\n", info->device_name, set, clear));
3089
3090 if (set & TIOCM_RTS)
3091 info->signals |= SerialSignal_RTS;
3092 if (set & TIOCM_DTR)
3093 info->signals |= SerialSignal_DTR;
3094 if (clear & TIOCM_RTS)
3095 info->signals &= ~SerialSignal_RTS;
3096 if (clear & TIOCM_DTR)
3097 info->signals &= ~SerialSignal_DTR;
3098
3099 spin_lock_irqsave(&info->lock,flags);
3100 set_signals(info);
3101 spin_unlock_irqrestore(&info->lock,flags);
3102 return 0;
3103 }
3104
3105 /*
3106 * block current process until the device is ready to open
3107 */
3108 static int block_til_ready(struct tty_struct *tty, struct file *filp,
3109 struct slgt_info *info)
3110 {
3111 DECLARE_WAITQUEUE(wait, current);
3112 int retval;
3113 int do_clocal = 0, extra_count = 0;
3114 unsigned long flags;
3115
3116 DBGINFO(("%s block_til_ready\n", tty->driver->name));
3117
3118 if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){
3119 /* nonblock mode is set or port is not enabled */
3120 info->flags |= ASYNC_NORMAL_ACTIVE;
3121 return 0;
3122 }
3123
3124 if (tty->termios->c_cflag & CLOCAL)
3125 do_clocal = 1;
3126
3127 /* Wait for carrier detect and the line to become
3128 * free (i.e., not in use by the callout). While we are in
3129 * this loop, info->count is dropped by one, so that
3130 * close() knows when to free things. We restore it upon
3131 * exit, either normal or abnormal.
3132 */
3133
3134 retval = 0;
3135 add_wait_queue(&info->open_wait, &wait);
3136
3137 spin_lock_irqsave(&info->lock, flags);
3138 if (!tty_hung_up_p(filp)) {
3139 extra_count = 1;
3140 info->count--;
3141 }
3142 spin_unlock_irqrestore(&info->lock, flags);
3143 info->blocked_open++;
3144
3145 while (1) {
3146 if ((tty->termios->c_cflag & CBAUD)) {
3147 spin_lock_irqsave(&info->lock,flags);
3148 info->signals |= SerialSignal_RTS + SerialSignal_DTR;
3149 set_signals(info);
3150 spin_unlock_irqrestore(&info->lock,flags);
3151 }
3152
3153 set_current_state(TASK_INTERRUPTIBLE);
3154
3155 if (tty_hung_up_p(filp) || !(info->flags & ASYNC_INITIALIZED)){
3156 retval = (info->flags & ASYNC_HUP_NOTIFY) ?
3157 -EAGAIN : -ERESTARTSYS;
3158 break;
3159 }
3160
3161 spin_lock_irqsave(&info->lock,flags);
3162 get_signals(info);
3163 spin_unlock_irqrestore(&info->lock,flags);
3164
3165 if (!(info->flags & ASYNC_CLOSING) &&
3166 (do_clocal || (info->signals & SerialSignal_DCD)) ) {
3167 break;
3168 }
3169
3170 if (signal_pending(current)) {
3171 retval = -ERESTARTSYS;
3172 break;
3173 }
3174
3175 DBGINFO(("%s block_til_ready wait\n", tty->driver->name));
3176 schedule();
3177 }
3178
3179 set_current_state(TASK_RUNNING);
3180 remove_wait_queue(&info->open_wait, &wait);
3181
3182 if (extra_count)
3183 info->count++;
3184 info->blocked_open--;
3185
3186 if (!retval)
3187 info->flags |= ASYNC_NORMAL_ACTIVE;
3188
3189 DBGINFO(("%s block_til_ready ready, rc=%d\n", tty->driver->name, retval));
3190 return retval;
3191 }
3192
3193 static int alloc_tmp_rbuf(struct slgt_info *info)
3194 {
3195 info->tmp_rbuf = kmalloc(info->max_frame_size + 5, GFP_KERNEL);
3196 if (info->tmp_rbuf == NULL)
3197 return -ENOMEM;
3198 return 0;
3199 }
3200
3201 static void free_tmp_rbuf(struct slgt_info *info)
3202 {
3203 kfree(info->tmp_rbuf);
3204 info->tmp_rbuf = NULL;
3205 }
3206
3207 /*
3208 * allocate DMA descriptor lists.
3209 */
3210 static int alloc_desc(struct slgt_info *info)
3211 {
3212 unsigned int i;
3213 unsigned int pbufs;
3214
3215 /* allocate memory to hold descriptor lists */
3216 info->bufs = pci_alloc_consistent(info->pdev, DESC_LIST_SIZE, &info->bufs_dma_addr);
3217 if (info->bufs == NULL)
3218 return -ENOMEM;
3219
3220 memset(info->bufs, 0, DESC_LIST_SIZE);
3221
3222 info->rbufs = (struct slgt_desc*)info->bufs;
3223 info->tbufs = ((struct slgt_desc*)info->bufs) + info->rbuf_count;
3224
3225 pbufs = (unsigned int)info->bufs_dma_addr;
3226
3227 /*
3228 * Build circular lists of descriptors
3229 */
3230
3231 for (i=0; i < info->rbuf_count; i++) {
3232 /* physical address of this descriptor */
3233 info->rbufs[i].pdesc = pbufs + (i * sizeof(struct slgt_desc));
3234
3235 /* physical address of next descriptor */
3236 if (i == info->rbuf_count - 1)
3237 info->rbufs[i].next = cpu_to_le32(pbufs);
3238 else
3239 info->rbufs[i].next = cpu_to_le32(pbufs + ((i+1) * sizeof(struct slgt_desc)));
3240 set_desc_count(info->rbufs[i], DMABUFSIZE);
3241 }
3242
3243 for (i=0; i < info->tbuf_count; i++) {
3244 /* physical address of this descriptor */
3245 info->tbufs[i].pdesc = pbufs + ((info->rbuf_count + i) * sizeof(struct slgt_desc));
3246
3247 /* physical address of next descriptor */
3248 if (i == info->tbuf_count - 1)
3249 info->tbufs[i].next = cpu_to_le32(pbufs + info->rbuf_count * sizeof(struct slgt_desc));
3250 else
3251 info->tbufs[i].next = cpu_to_le32(pbufs + ((info->rbuf_count + i + 1) * sizeof(struct slgt_desc)));
3252 }
3253
3254 return 0;
3255 }
3256
3257 static void free_desc(struct slgt_info *info)
3258 {
3259 if (info->bufs != NULL) {
3260 pci_free_consistent(info->pdev, DESC_LIST_SIZE, info->bufs, info->bufs_dma_addr);
3261 info->bufs = NULL;
3262 info->rbufs = NULL;
3263 info->tbufs = NULL;
3264 }
3265 }
3266
3267 static int alloc_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count)
3268 {
3269 int i;
3270 for (i=0; i < count; i++) {
3271 if ((bufs[i].buf = pci_alloc_consistent(info->pdev, DMABUFSIZE, &bufs[i].buf_dma_addr)) == NULL)
3272 return -ENOMEM;
3273 bufs[i].pbuf = cpu_to_le32((unsigned int)bufs[i].buf_dma_addr);
3274 }
3275 return 0;
3276 }
3277
3278 static void free_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count)
3279 {
3280 int i;
3281 for (i=0; i < count; i++) {
3282 if (bufs[i].buf == NULL)
3283 continue;
3284 pci_free_consistent(info->pdev, DMABUFSIZE, bufs[i].buf, bufs[i].buf_dma_addr);
3285 bufs[i].buf = NULL;
3286 }
3287 }
3288
3289 static int alloc_dma_bufs(struct slgt_info *info)
3290 {
3291 info->rbuf_count = 32;
3292 info->tbuf_count = 32;
3293
3294 if (alloc_desc(info) < 0 ||
3295 alloc_bufs(info, info->rbufs, info->rbuf_count) < 0 ||
3296 alloc_bufs(info, info->tbufs, info->tbuf_count) < 0 ||
3297 alloc_tmp_rbuf(info) < 0) {
3298 DBGERR(("%s DMA buffer alloc fail\n", info->device_name));
3299 return -ENOMEM;
3300 }
3301 reset_rbufs(info);
3302 return 0;
3303 }
3304
3305 static void free_dma_bufs(struct slgt_info *info)
3306 {
3307 if (info->bufs) {
3308 free_bufs(info, info->rbufs, info->rbuf_count);
3309 free_bufs(info, info->tbufs, info->tbuf_count);
3310 free_desc(info);
3311 }
3312 free_tmp_rbuf(info);
3313 }
3314
3315 static int claim_resources(struct slgt_info *info)
3316 {
3317 if (request_mem_region(info->phys_reg_addr, SLGT_REG_SIZE, "synclink_gt") == NULL) {
3318 DBGERR(("%s reg addr conflict, addr=%08X\n",
3319 info->device_name, info->phys_reg_addr));
3320 info->init_error = DiagStatus_AddressConflict;
3321 goto errout;
3322 }
3323 else
3324 info->reg_addr_requested = 1;
3325
3326 info->reg_addr = ioremap(info->phys_reg_addr, SLGT_REG_SIZE);
3327 if (!info->reg_addr) {
3328 DBGERR(("%s cant map device registers, addr=%08X\n",
3329 info->device_name, info->phys_reg_addr));
3330 info->init_error = DiagStatus_CantAssignPciResources;
3331 goto errout;
3332 }
3333 return 0;
3334
3335 errout:
3336 release_resources(info);
3337 return -ENODEV;
3338 }
3339
3340 static void release_resources(struct slgt_info *info)
3341 {
3342 if (info->irq_requested) {
3343 free_irq(info->irq_level, info);
3344 info->irq_requested = 0;
3345 }
3346
3347 if (info->reg_addr_requested) {
3348 release_mem_region(info->phys_reg_addr, SLGT_REG_SIZE);
3349 info->reg_addr_requested = 0;
3350 }
3351
3352 if (info->reg_addr) {
3353 iounmap(info->reg_addr);
3354 info->reg_addr = NULL;
3355 }
3356 }
3357
3358 /* Add the specified device instance data structure to the
3359 * global linked list of devices and increment the device count.
3360 */
3361 static void add_device(struct slgt_info *info)
3362 {
3363 char *devstr;
3364
3365 info->next_device = NULL;
3366 info->line = slgt_device_count;
3367 sprintf(info->device_name, "%s%d", tty_dev_prefix, info->line);
3368
3369 if (info->line < MAX_DEVICES) {
3370 if (maxframe[info->line])
3371 info->max_frame_size = maxframe[info->line];
3372 info->dosyncppp = dosyncppp[info->line];
3373 }
3374
3375 slgt_device_count++;
3376
3377 if (!slgt_device_list)
3378 slgt_device_list = info;
3379 else {
3380 struct slgt_info *current_dev = slgt_device_list;
3381 while(current_dev->next_device)
3382 current_dev = current_dev->next_device;
3383 current_dev->next_device = info;
3384 }
3385
3386 if (info->max_frame_size < 4096)
3387 info->max_frame_size = 4096;
3388 else if (info->max_frame_size > 65535)
3389 info->max_frame_size = 65535;
3390
3391 switch(info->pdev->device) {
3392 case SYNCLINK_GT_DEVICE_ID:
3393 devstr = "GT";
3394 break;
3395 case SYNCLINK_GT2_DEVICE_ID:
3396 devstr = "GT2";
3397 break;
3398 case SYNCLINK_GT4_DEVICE_ID:
3399 devstr = "GT4";
3400 break;
3401 case SYNCLINK_AC_DEVICE_ID:
3402 devstr = "AC";
3403 info->params.mode = MGSL_MODE_ASYNC;
3404 break;
3405 default:
3406 devstr = "(unknown model)";
3407 }
3408 printk("SyncLink %s %s IO=%08x IRQ=%d MaxFrameSize=%u\n",
3409 devstr, info->device_name, info->phys_reg_addr,
3410 info->irq_level, info->max_frame_size);
3411
3412 #if SYNCLINK_GENERIC_HDLC
3413 hdlcdev_init(info);
3414 #endif
3415 }
3416
3417 /*
3418 * allocate device instance structure, return NULL on failure
3419 */
3420 static struct slgt_info *alloc_dev(int adapter_num, int port_num, struct pci_dev *pdev)
3421 {
3422 struct slgt_info *info;
3423
3424 info = kzalloc(sizeof(struct slgt_info), GFP_KERNEL);
3425
3426 if (!info) {
3427 DBGERR(("%s device alloc failed adapter=%d port=%d\n",
3428 driver_name, adapter_num, port_num));
3429 } else {
3430 info->magic = MGSL_MAGIC;
3431 INIT_WORK(&info->task, bh_handler);
3432 info->max_frame_size = 4096;
3433 info->raw_rx_size = DMABUFSIZE;
3434 info->close_delay = 5*HZ/10;
3435 info->closing_wait = 30*HZ;
3436 init_waitqueue_head(&info->open_wait);
3437 init_waitqueue_head(&info->close_wait);
3438 init_waitqueue_head(&info->status_event_wait_q);
3439 init_waitqueue_head(&info->event_wait_q);
3440 spin_lock_init(&info->netlock);
3441 memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS));
3442 info->idle_mode = HDLC_TXIDLE_FLAGS;
3443 info->adapter_num = adapter_num;
3444 info->port_num = port_num;
3445
3446 setup_timer(&info->tx_timer, tx_timeout, (unsigned long)info);
3447 setup_timer(&info->rx_timer, rx_timeout, (unsigned long)info);
3448
3449 /* Copy configuration info to device instance data */
3450 info->pdev = pdev;
3451 info->irq_level = pdev->irq;
3452 info->phys_reg_addr = pci_resource_start(pdev,0);
3453
3454 info->bus_type = MGSL_BUS_TYPE_PCI;
3455 info->irq_flags = IRQF_SHARED;
3456
3457 info->init_error = -1; /* assume error, set to 0 on successful init */
3458 }
3459
3460 return info;
3461 }
3462
3463 static void device_init(int adapter_num, struct pci_dev *pdev)
3464 {
3465 struct slgt_info *port_array[SLGT_MAX_PORTS];
3466 int i;
3467 int port_count = 1;
3468
3469 if (pdev->device == SYNCLINK_GT2_DEVICE_ID)
3470 port_count = 2;
3471 else if (pdev->device == SYNCLINK_GT4_DEVICE_ID)
3472 port_count = 4;
3473
3474 /* allocate device instances for all ports */
3475 for (i=0; i < port_count; ++i) {
3476 port_array[i] = alloc_dev(adapter_num, i, pdev);
3477 if (port_array[i] == NULL) {
3478 for (--i; i >= 0; --i)
3479 kfree(port_array[i]);
3480 return;
3481 }
3482 }
3483
3484 /* give copy of port_array to all ports and add to device list */
3485 for (i=0; i < port_count; ++i) {
3486 memcpy(port_array[i]->port_array, port_array, sizeof(port_array));
3487 add_device(port_array[i]);
3488 port_array[i]->port_count = port_count;
3489 spin_lock_init(&port_array[i]->lock);
3490 }
3491
3492 /* Allocate and claim adapter resources */
3493 if (!claim_resources(port_array[0])) {
3494
3495 alloc_dma_bufs(port_array[0]);
3496
3497 /* copy resource information from first port to others */
3498 for (i = 1; i < port_count; ++i) {
3499 port_array[i]->lock = port_array[0]->lock;
3500 port_array[i]->irq_level = port_array[0]->irq_level;
3501 port_array[i]->reg_addr = port_array[0]->reg_addr;
3502 alloc_dma_bufs(port_array[i]);
3503 }
3504
3505 if (request_irq(port_array[0]->irq_level,
3506 slgt_interrupt,
3507 port_array[0]->irq_flags,
3508 port_array[0]->device_name,
3509 port_array[0]) < 0) {
3510 DBGERR(("%s request_irq failed IRQ=%d\n",
3511 port_array[0]->device_name,
3512 port_array[0]->irq_level));
3513 } else {
3514 port_array[0]->irq_requested = 1;
3515 adapter_test(port_array[0]);
3516 for (i=1 ; i < port_count ; i++) {
3517 port_array[i]->init_error = port_array[0]->init_error;
3518 port_array[i]->gpio_present = port_array[0]->gpio_present;
3519 }
3520 }
3521 }
3522
3523 for (i=0; i < port_count; ++i)
3524 tty_register_device(serial_driver, port_array[i]->line, &(port_array[i]->pdev->dev));
3525 }
3526
3527 static int __devinit init_one(struct pci_dev *dev,
3528 const struct pci_device_id *ent)
3529 {
3530 if (pci_enable_device(dev)) {
3531 printk("error enabling pci device %p\n", dev);
3532 return -EIO;
3533 }
3534 pci_set_master(dev);
3535 device_init(slgt_device_count, dev);
3536 return 0;
3537 }
3538
3539 static void __devexit remove_one(struct pci_dev *dev)
3540 {
3541 }
3542
3543 static const struct tty_operations ops = {
3544 .open = open,
3545 .close = close,
3546 .write = write,
3547 .put_char = put_char,
3548 .flush_chars = flush_chars,
3549 .write_room = write_room,
3550 .chars_in_buffer = chars_in_buffer,
3551 .flush_buffer = flush_buffer,
3552 .ioctl = ioctl,
3553 .compat_ioctl = slgt_compat_ioctl,
3554 .throttle = throttle,
3555 .unthrottle = unthrottle,
3556 .send_xchar = send_xchar,
3557 .break_ctl = set_break,
3558 .wait_until_sent = wait_until_sent,
3559 .read_proc = read_proc,
3560 .set_termios = set_termios,
3561 .stop = tx_hold,
3562 .start = tx_release,
3563 .hangup = hangup,
3564 .tiocmget = tiocmget,
3565 .tiocmset = tiocmset,
3566 };
3567
3568 static void slgt_cleanup(void)
3569 {
3570 int rc;
3571 struct slgt_info *info;
3572 struct slgt_info *tmp;
3573
3574 printk("unload %s %s\n", driver_name, driver_version);
3575
3576 if (serial_driver) {
3577 for (info=slgt_device_list ; info != NULL ; info=info->next_device)
3578 tty_unregister_device(serial_driver, info->line);
3579 if ((rc = tty_unregister_driver(serial_driver)))
3580 DBGERR(("tty_unregister_driver error=%d\n", rc));
3581 put_tty_driver(serial_driver);
3582 }
3583
3584 /* reset devices */
3585 info = slgt_device_list;
3586 while(info) {
3587 reset_port(info);
3588 info = info->next_device;
3589 }
3590
3591 /* release devices */
3592 info = slgt_device_list;
3593 while(info) {
3594 #if SYNCLINK_GENERIC_HDLC
3595 hdlcdev_exit(info);
3596 #endif
3597 free_dma_bufs(info);
3598 free_tmp_rbuf(info);
3599 if (info->port_num == 0)
3600 release_resources(info);
3601 tmp = info;
3602 info = info->next_device;
3603 kfree(tmp);
3604 }
3605
3606 if (pci_registered)
3607 pci_unregister_driver(&pci_driver);
3608 }
3609
3610 /*
3611 * Driver initialization entry point.
3612 */
3613 static int __init slgt_init(void)
3614 {
3615 int rc;
3616
3617 printk("%s %s\n", driver_name, driver_version);
3618
3619 serial_driver = alloc_tty_driver(MAX_DEVICES);
3620 if (!serial_driver) {
3621 printk("%s can't allocate tty driver\n", driver_name);
3622 return -ENOMEM;
3623 }
3624
3625 /* Initialize the tty_driver structure */
3626
3627 serial_driver->owner = THIS_MODULE;
3628 serial_driver->driver_name = tty_driver_name;
3629 serial_driver->name = tty_dev_prefix;
3630 serial_driver->major = ttymajor;
3631 serial_driver->minor_start = 64;
3632 serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
3633 serial_driver->subtype = SERIAL_TYPE_NORMAL;
3634 serial_driver->init_termios = tty_std_termios;
3635 serial_driver->init_termios.c_cflag =
3636 B9600 | CS8 | CREAD | HUPCL | CLOCAL;
3637 serial_driver->init_termios.c_ispeed = 9600;
3638 serial_driver->init_termios.c_ospeed = 9600;
3639 serial_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
3640 tty_set_operations(serial_driver, &ops);
3641 if ((rc = tty_register_driver(serial_driver)) < 0) {
3642 DBGERR(("%s can't register serial driver\n", driver_name));
3643 put_tty_driver(serial_driver);
3644 serial_driver = NULL;
3645 goto error;
3646 }
3647
3648 printk("%s %s, tty major#%d\n",
3649 driver_name, driver_version,
3650 serial_driver->major);
3651
3652 slgt_device_count = 0;
3653 if ((rc = pci_register_driver(&pci_driver)) < 0) {
3654 printk("%s pci_register_driver error=%d\n", driver_name, rc);
3655 goto error;
3656 }
3657 pci_registered = 1;
3658
3659 if (!slgt_device_list)
3660 printk("%s no devices found\n",driver_name);
3661
3662 return 0;
3663
3664 error:
3665 slgt_cleanup();
3666 return rc;
3667 }
3668
3669 static void __exit slgt_exit(void)
3670 {
3671 slgt_cleanup();
3672 }
3673
3674 module_init(slgt_init);
3675 module_exit(slgt_exit);
3676
3677 /*
3678 * register access routines
3679 */
3680
3681 #define CALC_REGADDR() \
3682 unsigned long reg_addr = ((unsigned long)info->reg_addr) + addr; \
3683 if (addr >= 0x80) \
3684 reg_addr += (info->port_num) * 32;
3685
3686 static __u8 rd_reg8(struct slgt_info *info, unsigned int addr)
3687 {
3688 CALC_REGADDR();
3689 return readb((void __iomem *)reg_addr);
3690 }
3691
3692 static void wr_reg8(struct slgt_info *info, unsigned int addr, __u8 value)
3693 {
3694 CALC_REGADDR();
3695 writeb(value, (void __iomem *)reg_addr);
3696 }
3697
3698 static __u16 rd_reg16(struct slgt_info *info, unsigned int addr)
3699 {
3700 CALC_REGADDR();
3701 return readw((void __iomem *)reg_addr);
3702 }
3703
3704 static void wr_reg16(struct slgt_info *info, unsigned int addr, __u16 value)
3705 {
3706 CALC_REGADDR();
3707 writew(value, (void __iomem *)reg_addr);
3708 }
3709
3710 static __u32 rd_reg32(struct slgt_info *info, unsigned int addr)
3711 {
3712 CALC_REGADDR();
3713 return readl((void __iomem *)reg_addr);
3714 }
3715
3716 static void wr_reg32(struct slgt_info *info, unsigned int addr, __u32 value)
3717 {
3718 CALC_REGADDR();
3719 writel(value, (void __iomem *)reg_addr);
3720 }
3721
3722 static void rdma_reset(struct slgt_info *info)
3723 {
3724 unsigned int i;
3725
3726 /* set reset bit */
3727 wr_reg32(info, RDCSR, BIT1);
3728
3729 /* wait for enable bit cleared */
3730 for(i=0 ; i < 1000 ; i++)
3731 if (!(rd_reg32(info, RDCSR) & BIT0))
3732 break;
3733 }
3734
3735 static void tdma_reset(struct slgt_info *info)
3736 {
3737 unsigned int i;
3738
3739 /* set reset bit */
3740 wr_reg32(info, TDCSR, BIT1);
3741
3742 /* wait for enable bit cleared */
3743 for(i=0 ; i < 1000 ; i++)
3744 if (!(rd_reg32(info, TDCSR) & BIT0))
3745 break;
3746 }
3747
3748 /*
3749 * enable internal loopback
3750 * TxCLK and RxCLK are generated from BRG
3751 * and TxD is looped back to RxD internally.
3752 */
3753 static void enable_loopback(struct slgt_info *info)
3754 {
3755 /* SCR (serial control) BIT2=looopback enable */
3756 wr_reg16(info, SCR, (unsigned short)(rd_reg16(info, SCR) | BIT2));
3757
3758 if (info->params.mode != MGSL_MODE_ASYNC) {
3759 /* CCR (clock control)
3760 * 07..05 tx clock source (010 = BRG)
3761 * 04..02 rx clock source (010 = BRG)
3762 * 01 auxclk enable (0 = disable)
3763 * 00 BRG enable (1 = enable)
3764 *
3765 * 0100 1001
3766 */
3767 wr_reg8(info, CCR, 0x49);
3768
3769 /* set speed if available, otherwise use default */
3770 if (info->params.clock_speed)
3771 set_rate(info, info->params.clock_speed);
3772 else
3773 set_rate(info, 3686400);
3774 }
3775 }
3776
3777 /*
3778 * set baud rate generator to specified rate
3779 */
3780 static void set_rate(struct slgt_info *info, u32 rate)
3781 {
3782 unsigned int div;
3783 static unsigned int osc = 14745600;
3784
3785 /* div = osc/rate - 1
3786 *
3787 * Round div up if osc/rate is not integer to
3788 * force to next slowest rate.
3789 */
3790
3791 if (rate) {
3792 div = osc/rate;
3793 if (!(osc % rate) && div)
3794 div--;
3795 wr_reg16(info, BDR, (unsigned short)div);
3796 }
3797 }
3798
3799 static void rx_stop(struct slgt_info *info)
3800 {
3801 unsigned short val;
3802
3803 /* disable and reset receiver */
3804 val = rd_reg16(info, RCR) & ~BIT1; /* clear enable bit */
3805 wr_reg16(info, RCR, (unsigned short)(val | BIT2)); /* set reset bit */
3806 wr_reg16(info, RCR, val); /* clear reset bit */
3807
3808 slgt_irq_off(info, IRQ_RXOVER + IRQ_RXDATA + IRQ_RXIDLE);
3809
3810 /* clear pending rx interrupts */
3811 wr_reg16(info, SSR, IRQ_RXIDLE + IRQ_RXOVER);
3812
3813 rdma_reset(info);
3814
3815 info->rx_enabled = 0;
3816 info->rx_restart = 0;
3817 }
3818
3819 static void rx_start(struct slgt_info *info)
3820 {
3821 unsigned short val;
3822
3823 slgt_irq_off(info, IRQ_RXOVER + IRQ_RXDATA);
3824
3825 /* clear pending rx overrun IRQ */
3826 wr_reg16(info, SSR, IRQ_RXOVER);
3827
3828 /* reset and disable receiver */
3829 val = rd_reg16(info, RCR) & ~BIT1; /* clear enable bit */
3830 wr_reg16(info, RCR, (unsigned short)(val | BIT2)); /* set reset bit */
3831 wr_reg16(info, RCR, val); /* clear reset bit */
3832
3833 rdma_reset(info);
3834 reset_rbufs(info);
3835
3836 /* set 1st descriptor address */
3837 wr_reg32(info, RDDAR, info->rbufs[0].pdesc);
3838
3839 if (info->params.mode != MGSL_MODE_ASYNC) {
3840 /* enable rx DMA and DMA interrupt */
3841 wr_reg32(info, RDCSR, (BIT2 + BIT0));
3842 } else {
3843 /* enable saving of rx status, rx DMA and DMA interrupt */
3844 wr_reg32(info, RDCSR, (BIT6 + BIT2 + BIT0));
3845 }
3846
3847 slgt_irq_on(info, IRQ_RXOVER);
3848
3849 /* enable receiver */
3850 wr_reg16(info, RCR, (unsigned short)(rd_reg16(info, RCR) | BIT1));
3851
3852 info->rx_restart = 0;
3853 info->rx_enabled = 1;
3854 }
3855
3856 static void tx_start(struct slgt_info *info)
3857 {
3858 if (!info->tx_enabled) {
3859 wr_reg16(info, TCR,
3860 (unsigned short)((rd_reg16(info, TCR) | BIT1) & ~BIT2));
3861 info->tx_enabled = TRUE;
3862 }
3863
3864 if (info->tx_count) {
3865 info->drop_rts_on_tx_done = 0;
3866
3867 if (info->params.mode != MGSL_MODE_ASYNC) {
3868 if (info->params.flags & HDLC_FLAG_AUTO_RTS) {
3869 get_signals(info);
3870 if (!(info->signals & SerialSignal_RTS)) {
3871 info->signals |= SerialSignal_RTS;
3872 set_signals(info);
3873 info->drop_rts_on_tx_done = 1;
3874 }
3875 }
3876
3877 slgt_irq_off(info, IRQ_TXDATA);
3878 slgt_irq_on(info, IRQ_TXUNDER + IRQ_TXIDLE);
3879 /* clear tx idle and underrun status bits */
3880 wr_reg16(info, SSR, (unsigned short)(IRQ_TXIDLE + IRQ_TXUNDER));
3881 if (info->params.mode == MGSL_MODE_HDLC)
3882 mod_timer(&info->tx_timer, jiffies +
3883 msecs_to_jiffies(5000));
3884 } else {
3885 slgt_irq_off(info, IRQ_TXDATA);
3886 slgt_irq_on(info, IRQ_TXIDLE);
3887 /* clear tx idle status bit */
3888 wr_reg16(info, SSR, IRQ_TXIDLE);
3889 }
3890 tdma_start(info);
3891 info->tx_active = 1;
3892 }
3893 }
3894
3895 /*
3896 * start transmit DMA if inactive and there are unsent buffers
3897 */
3898 static void tdma_start(struct slgt_info *info)
3899 {
3900 unsigned int i;
3901
3902 if (rd_reg32(info, TDCSR) & BIT0)
3903 return;
3904
3905 /* transmit DMA inactive, check for unsent buffers */
3906 i = info->tbuf_start;
3907 while (!desc_count(info->tbufs[i])) {
3908 if (++i == info->tbuf_count)
3909 i = 0;
3910 if (i == info->tbuf_current)
3911 return;
3912 }
3913 info->tbuf_start = i;
3914
3915 /* there are unsent buffers, start transmit DMA */
3916
3917 /* reset needed if previous error condition */
3918 tdma_reset(info);
3919
3920 /* set 1st descriptor address */
3921 wr_reg32(info, TDDAR, info->tbufs[info->tbuf_start].pdesc);
3922 switch(info->params.mode) {
3923 case MGSL_MODE_RAW:
3924 case MGSL_MODE_MONOSYNC:
3925 case MGSL_MODE_BISYNC:
3926 wr_reg32(info, TDCSR, BIT2 + BIT0); /* IRQ + DMA enable */
3927 break;
3928 default:
3929 wr_reg32(info, TDCSR, BIT0); /* DMA enable */
3930 }
3931 }
3932
3933 static void tx_stop(struct slgt_info *info)
3934 {
3935 unsigned short val;
3936
3937 del_timer(&info->tx_timer);
3938
3939 tdma_reset(info);
3940
3941 /* reset and disable transmitter */
3942 val = rd_reg16(info, TCR) & ~BIT1; /* clear enable bit */
3943 wr_reg16(info, TCR, (unsigned short)(val | BIT2)); /* set reset bit */
3944
3945 slgt_irq_off(info, IRQ_TXDATA + IRQ_TXIDLE + IRQ_TXUNDER);
3946
3947 /* clear tx idle and underrun status bit */
3948 wr_reg16(info, SSR, (unsigned short)(IRQ_TXIDLE + IRQ_TXUNDER));
3949
3950 reset_tbufs(info);
3951
3952 info->tx_enabled = 0;
3953 info->tx_active = 0;
3954 }
3955
3956 static void reset_port(struct slgt_info *info)
3957 {
3958 if (!info->reg_addr)
3959 return;
3960
3961 tx_stop(info);
3962 rx_stop(info);
3963
3964 info->signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
3965 set_signals(info);
3966
3967 slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
3968 }
3969
3970 static void reset_adapter(struct slgt_info *info)
3971 {
3972 int i;
3973 for (i=0; i < info->port_count; ++i) {
3974 if (info->port_array[i])
3975 reset_port(info->port_array[i]);
3976 }
3977 }
3978
3979 static void async_mode(struct slgt_info *info)
3980 {
3981 unsigned short val;
3982
3983 slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
3984 tx_stop(info);
3985 rx_stop(info);
3986
3987 /* TCR (tx control)
3988 *
3989 * 15..13 mode, 010=async
3990 * 12..10 encoding, 000=NRZ
3991 * 09 parity enable
3992 * 08 1=odd parity, 0=even parity
3993 * 07 1=RTS driver control
3994 * 06 1=break enable
3995 * 05..04 character length
3996 * 00=5 bits
3997 * 01=6 bits
3998 * 10=7 bits
3999 * 11=8 bits
4000 * 03 0=1 stop bit, 1=2 stop bits
4001 * 02 reset
4002 * 01 enable
4003 * 00 auto-CTS enable
4004 */
4005 val = 0x4000;
4006
4007 if (info->if_mode & MGSL_INTERFACE_RTS_EN)
4008 val |= BIT7;
4009
4010 if (info->params.parity != ASYNC_PARITY_NONE) {
4011 val |= BIT9;
4012 if (info->params.parity == ASYNC_PARITY_ODD)
4013 val |= BIT8;
4014 }
4015
4016 switch (info->params.data_bits)
4017 {
4018 case 6: val |= BIT4; break;
4019 case 7: val |= BIT5; break;
4020 case 8: val |= BIT5 + BIT4; break;
4021 }
4022
4023 if (info->params.stop_bits != 1)
4024 val |= BIT3;
4025
4026 if (info->params.flags & HDLC_FLAG_AUTO_CTS)
4027 val |= BIT0;
4028
4029 wr_reg16(info, TCR, val);
4030
4031 /* RCR (rx control)
4032 *
4033 * 15..13 mode, 010=async
4034 * 12..10 encoding, 000=NRZ
4035 * 09 parity enable
4036 * 08 1=odd parity, 0=even parity
4037 * 07..06 reserved, must be 0
4038 * 05..04 character length
4039 * 00=5 bits
4040 * 01=6 bits
4041 * 10=7 bits
4042 * 11=8 bits
4043 * 03 reserved, must be zero
4044 * 02 reset
4045 * 01 enable
4046 * 00 auto-DCD enable
4047 */
4048 val = 0x4000;
4049
4050 if (info->params.parity != ASYNC_PARITY_NONE) {
4051 val |= BIT9;
4052 if (info->params.parity == ASYNC_PARITY_ODD)
4053 val |= BIT8;
4054 }
4055
4056 switch (info->params.data_bits)
4057 {
4058 case 6: val |= BIT4; break;
4059 case 7: val |= BIT5; break;
4060 case 8: val |= BIT5 + BIT4; break;
4061 }
4062
4063 if (info->params.flags & HDLC_FLAG_AUTO_DCD)
4064 val |= BIT0;
4065
4066 wr_reg16(info, RCR, val);
4067
4068 /* CCR (clock control)
4069 *
4070 * 07..05 011 = tx clock source is BRG/16
4071 * 04..02 010 = rx clock source is BRG
4072 * 01 0 = auxclk disabled
4073 * 00 1 = BRG enabled
4074 *
4075 * 0110 1001
4076 */
4077 wr_reg8(info, CCR, 0x69);
4078
4079 msc_set_vcr(info);
4080
4081 /* SCR (serial control)
4082 *
4083 * 15 1=tx req on FIFO half empty
4084 * 14 1=rx req on FIFO half full
4085 * 13 tx data IRQ enable
4086 * 12 tx idle IRQ enable
4087 * 11 rx break on IRQ enable
4088 * 10 rx data IRQ enable
4089 * 09 rx break off IRQ enable
4090 * 08 overrun IRQ enable
4091 * 07 DSR IRQ enable
4092 * 06 CTS IRQ enable
4093 * 05 DCD IRQ enable
4094 * 04 RI IRQ enable
4095 * 03 reserved, must be zero
4096 * 02 1=txd->rxd internal loopback enable
4097 * 01 reserved, must be zero
4098 * 00 1=master IRQ enable
4099 */
4100 val = BIT15 + BIT14 + BIT0;
4101 wr_reg16(info, SCR, val);
4102
4103 slgt_irq_on(info, IRQ_RXBREAK | IRQ_RXOVER);
4104
4105 set_rate(info, info->params.data_rate * 16);
4106
4107 if (info->params.loopback)
4108 enable_loopback(info);
4109 }
4110
4111 static void sync_mode(struct slgt_info *info)
4112 {
4113 unsigned short val;
4114
4115 slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
4116 tx_stop(info);
4117 rx_stop(info);
4118
4119 /* TCR (tx control)
4120 *
4121 * 15..13 mode, 000=HDLC 001=raw 010=async 011=monosync 100=bisync
4122 * 12..10 encoding
4123 * 09 CRC enable
4124 * 08 CRC32
4125 * 07 1=RTS driver control
4126 * 06 preamble enable
4127 * 05..04 preamble length
4128 * 03 share open/close flag
4129 * 02 reset
4130 * 01 enable
4131 * 00 auto-CTS enable
4132 */
4133 val = 0;
4134
4135 switch(info->params.mode) {
4136 case MGSL_MODE_MONOSYNC: val |= BIT14 + BIT13; break;
4137 case MGSL_MODE_BISYNC: val |= BIT15; break;
4138 case MGSL_MODE_RAW: val |= BIT13; break;
4139 }
4140 if (info->if_mode & MGSL_INTERFACE_RTS_EN)
4141 val |= BIT7;
4142
4143 switch(info->params.encoding)
4144 {
4145 case HDLC_ENCODING_NRZB: val |= BIT10; break;
4146 case HDLC_ENCODING_NRZI_MARK: val |= BIT11; break;
4147 case HDLC_ENCODING_NRZI: val |= BIT11 + BIT10; break;
4148 case HDLC_ENCODING_BIPHASE_MARK: val |= BIT12; break;
4149 case HDLC_ENCODING_BIPHASE_SPACE: val |= BIT12 + BIT10; break;
4150 case HDLC_ENCODING_BIPHASE_LEVEL: val |= BIT12 + BIT11; break;
4151 case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: val |= BIT12 + BIT11 + BIT10; break;
4152 }
4153
4154 switch (info->params.crc_type & HDLC_CRC_MASK)
4155 {
4156 case HDLC_CRC_16_CCITT: val |= BIT9; break;
4157 case HDLC_CRC_32_CCITT: val |= BIT9 + BIT8; break;
4158 }
4159
4160 if (info->params.preamble != HDLC_PREAMBLE_PATTERN_NONE)
4161 val |= BIT6;
4162
4163 switch (info->params.preamble_length)
4164 {
4165 case HDLC_PREAMBLE_LENGTH_16BITS: val |= BIT5; break;
4166 case HDLC_PREAMBLE_LENGTH_32BITS: val |= BIT4; break;
4167 case HDLC_PREAMBLE_LENGTH_64BITS: val |= BIT5 + BIT4; break;
4168 }
4169
4170 if (info->params.flags & HDLC_FLAG_AUTO_CTS)
4171 val |= BIT0;
4172
4173 wr_reg16(info, TCR, val);
4174
4175 /* TPR (transmit preamble) */
4176
4177 switch (info->params.preamble)
4178 {
4179 case HDLC_PREAMBLE_PATTERN_FLAGS: val = 0x7e; break;
4180 case HDLC_PREAMBLE_PATTERN_ONES: val = 0xff; break;
4181 case HDLC_PREAMBLE_PATTERN_ZEROS: val = 0x00; break;
4182 case HDLC_PREAMBLE_PATTERN_10: val = 0x55; break;
4183 case HDLC_PREAMBLE_PATTERN_01: val = 0xaa; break;
4184 default: val = 0x7e; break;
4185 }
4186 wr_reg8(info, TPR, (unsigned char)val);
4187
4188 /* RCR (rx control)
4189 *
4190 * 15..13 mode, 000=HDLC 001=raw 010=async 011=monosync 100=bisync
4191 * 12..10 encoding
4192 * 09 CRC enable
4193 * 08 CRC32
4194 * 07..03 reserved, must be 0
4195 * 02 reset
4196 * 01 enable
4197 * 00 auto-DCD enable
4198 */
4199 val = 0;
4200
4201 switch(info->params.mode) {
4202 case MGSL_MODE_MONOSYNC: val |= BIT14 + BIT13; break;
4203 case MGSL_MODE_BISYNC: val |= BIT15; break;
4204 case MGSL_MODE_RAW: val |= BIT13; break;
4205 }
4206
4207 switch(info->params.encoding)
4208 {
4209 case HDLC_ENCODING_NRZB: val |= BIT10; break;
4210 case HDLC_ENCODING_NRZI_MARK: val |= BIT11; break;
4211 case HDLC_ENCODING_NRZI: val |= BIT11 + BIT10; break;
4212 case HDLC_ENCODING_BIPHASE_MARK: val |= BIT12; break;
4213 case HDLC_ENCODING_BIPHASE_SPACE: val |= BIT12 + BIT10; break;
4214 case HDLC_ENCODING_BIPHASE_LEVEL: val |= BIT12 + BIT11; break;
4215 case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: val |= BIT12 + BIT11 + BIT10; break;
4216 }
4217
4218 switch (info->params.crc_type & HDLC_CRC_MASK)
4219 {
4220 case HDLC_CRC_16_CCITT: val |= BIT9; break;
4221 case HDLC_CRC_32_CCITT: val |= BIT9 + BIT8; break;
4222 }
4223
4224 if (info->params.flags & HDLC_FLAG_AUTO_DCD)
4225 val |= BIT0;
4226
4227 wr_reg16(info, RCR, val);
4228
4229 /* CCR (clock control)
4230 *
4231 * 07..05 tx clock source
4232 * 04..02 rx clock source
4233 * 01 auxclk enable
4234 * 00 BRG enable
4235 */
4236 val = 0;
4237
4238 if (info->params.flags & HDLC_FLAG_TXC_BRG)
4239 {
4240 // when RxC source is DPLL, BRG generates 16X DPLL
4241 // reference clock, so take TxC from BRG/16 to get
4242 // transmit clock at actual data rate
4243 if (info->params.flags & HDLC_FLAG_RXC_DPLL)
4244 val |= BIT6 + BIT5; /* 011, txclk = BRG/16 */
4245 else
4246 val |= BIT6; /* 010, txclk = BRG */
4247 }
4248 else if (info->params.flags & HDLC_FLAG_TXC_DPLL)
4249 val |= BIT7; /* 100, txclk = DPLL Input */
4250 else if (info->params.flags & HDLC_FLAG_TXC_RXCPIN)
4251 val |= BIT5; /* 001, txclk = RXC Input */
4252
4253 if (info->params.flags & HDLC_FLAG_RXC_BRG)
4254 val |= BIT3; /* 010, rxclk = BRG */
4255 else if (info->params.flags & HDLC_FLAG_RXC_DPLL)
4256 val |= BIT4; /* 100, rxclk = DPLL */
4257 else if (info->params.flags & HDLC_FLAG_RXC_TXCPIN)
4258 val |= BIT2; /* 001, rxclk = TXC Input */
4259
4260 if (info->params.clock_speed)
4261 val |= BIT1 + BIT0;
4262
4263 wr_reg8(info, CCR, (unsigned char)val);
4264
4265 if (info->params.flags & (HDLC_FLAG_TXC_DPLL + HDLC_FLAG_RXC_DPLL))
4266 {
4267 // program DPLL mode
4268 switch(info->params.encoding)
4269 {
4270 case HDLC_ENCODING_BIPHASE_MARK:
4271 case HDLC_ENCODING_BIPHASE_SPACE:
4272 val = BIT7; break;
4273 case HDLC_ENCODING_BIPHASE_LEVEL:
4274 case HDLC_ENCODING_DIFF_BIPHASE_LEVEL:
4275 val = BIT7 + BIT6; break;
4276 default: val = BIT6; // NRZ encodings
4277 }
4278 wr_reg16(info, RCR, (unsigned short)(rd_reg16(info, RCR) | val));
4279
4280 // DPLL requires a 16X reference clock from BRG
4281 set_rate(info, info->params.clock_speed * 16);
4282 }
4283 else
4284 set_rate(info, info->params.clock_speed);
4285
4286 tx_set_idle(info);
4287
4288 msc_set_vcr(info);
4289
4290 /* SCR (serial control)
4291 *
4292 * 15 1=tx req on FIFO half empty
4293 * 14 1=rx req on FIFO half full
4294 * 13 tx data IRQ enable
4295 * 12 tx idle IRQ enable
4296 * 11 underrun IRQ enable
4297 * 10 rx data IRQ enable
4298 * 09 rx idle IRQ enable
4299 * 08 overrun IRQ enable
4300 * 07 DSR IRQ enable
4301 * 06 CTS IRQ enable
4302 * 05 DCD IRQ enable
4303 * 04 RI IRQ enable
4304 * 03 reserved, must be zero
4305 * 02 1=txd->rxd internal loopback enable
4306 * 01 reserved, must be zero
4307 * 00 1=master IRQ enable
4308 */
4309 wr_reg16(info, SCR, BIT15 + BIT14 + BIT0);
4310
4311 if (info->params.loopback)
4312 enable_loopback(info);
4313 }
4314
4315 /*
4316 * set transmit idle mode
4317 */
4318 static void tx_set_idle(struct slgt_info *info)
4319 {
4320 unsigned char val;
4321 unsigned short tcr;
4322
4323 /* if preamble enabled (tcr[6] == 1) then tx idle size = 8 bits
4324 * else tcr[5:4] = tx idle size: 00 = 8 bits, 01 = 16 bits
4325 */
4326 tcr = rd_reg16(info, TCR);
4327 if (info->idle_mode & HDLC_TXIDLE_CUSTOM_16) {
4328 /* disable preamble, set idle size to 16 bits */
4329 tcr = (tcr & ~(BIT6 + BIT5)) | BIT4;
4330 /* MSB of 16 bit idle specified in tx preamble register (TPR) */
4331 wr_reg8(info, TPR, (unsigned char)((info->idle_mode >> 8) & 0xff));
4332 } else if (!(tcr & BIT6)) {
4333 /* preamble is disabled, set idle size to 8 bits */
4334 tcr &= ~(BIT5 + BIT4);
4335 }
4336 wr_reg16(info, TCR, tcr);
4337
4338 if (info->idle_mode & (HDLC_TXIDLE_CUSTOM_8 | HDLC_TXIDLE_CUSTOM_16)) {
4339 /* LSB of custom tx idle specified in tx idle register */
4340 val = (unsigned char)(info->idle_mode & 0xff);
4341 } else {
4342 /* standard 8 bit idle patterns */
4343 switch(info->idle_mode)
4344 {
4345 case HDLC_TXIDLE_FLAGS: val = 0x7e; break;
4346 case HDLC_TXIDLE_ALT_ZEROS_ONES:
4347 case HDLC_TXIDLE_ALT_MARK_SPACE: val = 0xaa; break;
4348 case HDLC_TXIDLE_ZEROS:
4349 case HDLC_TXIDLE_SPACE: val = 0x00; break;
4350 default: val = 0xff;
4351 }
4352 }
4353
4354 wr_reg8(info, TIR, val);
4355 }
4356
4357 /*
4358 * get state of V24 status (input) signals
4359 */
4360 static void get_signals(struct slgt_info *info)
4361 {
4362 unsigned short status = rd_reg16(info, SSR);
4363
4364 /* clear all serial signals except DTR and RTS */
4365 info->signals &= SerialSignal_DTR + SerialSignal_RTS;
4366
4367 if (status & BIT3)
4368 info->signals |= SerialSignal_DSR;
4369 if (status & BIT2)
4370 info->signals |= SerialSignal_CTS;
4371 if (status & BIT1)
4372 info->signals |= SerialSignal_DCD;
4373 if (status & BIT0)
4374 info->signals |= SerialSignal_RI;
4375 }
4376
4377 /*
4378 * set V.24 Control Register based on current configuration
4379 */
4380 static void msc_set_vcr(struct slgt_info *info)
4381 {
4382 unsigned char val = 0;
4383
4384 /* VCR (V.24 control)
4385 *
4386 * 07..04 serial IF select
4387 * 03 DTR
4388 * 02 RTS
4389 * 01 LL
4390 * 00 RL
4391 */
4392
4393 switch(info->if_mode & MGSL_INTERFACE_MASK)
4394 {
4395 case MGSL_INTERFACE_RS232:
4396 val |= BIT5; /* 0010 */
4397 break;
4398 case MGSL_INTERFACE_V35:
4399 val |= BIT7 + BIT6 + BIT5; /* 1110 */
4400 break;
4401 case MGSL_INTERFACE_RS422:
4402 val |= BIT6; /* 0100 */
4403 break;
4404 }
4405
4406 if (info->signals & SerialSignal_DTR)
4407 val |= BIT3;
4408 if (info->signals & SerialSignal_RTS)
4409 val |= BIT2;
4410 if (info->if_mode & MGSL_INTERFACE_LL)
4411 val |= BIT1;
4412 if (info->if_mode & MGSL_INTERFACE_RL)
4413 val |= BIT0;
4414 wr_reg8(info, VCR, val);
4415 }
4416
4417 /*
4418 * set state of V24 control (output) signals
4419 */
4420 static void set_signals(struct slgt_info *info)
4421 {
4422 unsigned char val = rd_reg8(info, VCR);
4423 if (info->signals & SerialSignal_DTR)
4424 val |= BIT3;
4425 else
4426 val &= ~BIT3;
4427 if (info->signals & SerialSignal_RTS)
4428 val |= BIT2;
4429 else
4430 val &= ~BIT2;
4431 wr_reg8(info, VCR, val);
4432 }
4433
4434 /*
4435 * free range of receive DMA buffers (i to last)
4436 */
4437 static void free_rbufs(struct slgt_info *info, unsigned int i, unsigned int last)
4438 {
4439 int done = 0;
4440
4441 while(!done) {
4442 /* reset current buffer for reuse */
4443 info->rbufs[i].status = 0;
4444 switch(info->params.mode) {
4445 case MGSL_MODE_RAW:
4446 case MGSL_MODE_MONOSYNC:
4447 case MGSL_MODE_BISYNC:
4448 set_desc_count(info->rbufs[i], info->raw_rx_size);
4449 break;
4450 default:
4451 set_desc_count(info->rbufs[i], DMABUFSIZE);
4452 }
4453
4454 if (i == last)
4455 done = 1;
4456 if (++i == info->rbuf_count)
4457 i = 0;
4458 }
4459 info->rbuf_current = i;
4460 }
4461
4462 /*
4463 * mark all receive DMA buffers as free
4464 */
4465 static void reset_rbufs(struct slgt_info *info)
4466 {
4467 free_rbufs(info, 0, info->rbuf_count - 1);
4468 }
4469
4470 /*
4471 * pass receive HDLC frame to upper layer
4472 *
4473 * return 1 if frame available, otherwise 0
4474 */
4475 static int rx_get_frame(struct slgt_info *info)
4476 {
4477 unsigned int start, end;
4478 unsigned short status;
4479 unsigned int framesize = 0;
4480 int rc = 0;
4481 unsigned long flags;
4482 struct tty_struct *tty = info->tty;
4483 unsigned char addr_field = 0xff;
4484 unsigned int crc_size = 0;
4485
4486 switch (info->params.crc_type & HDLC_CRC_MASK) {
4487 case HDLC_CRC_16_CCITT: crc_size = 2; break;
4488 case HDLC_CRC_32_CCITT: crc_size = 4; break;
4489 }
4490
4491 check_again:
4492
4493 framesize = 0;
4494 addr_field = 0xff;
4495 start = end = info->rbuf_current;
4496
4497 for (;;) {
4498 if (!desc_complete(info->rbufs[end]))
4499 goto cleanup;
4500
4501 if (framesize == 0 && info->params.addr_filter != 0xff)
4502 addr_field = info->rbufs[end].buf[0];
4503
4504 framesize += desc_count(info->rbufs[end]);
4505
4506 if (desc_eof(info->rbufs[end]))
4507 break;
4508
4509 if (++end == info->rbuf_count)
4510 end = 0;
4511
4512 if (end == info->rbuf_current) {
4513 if (info->rx_enabled){
4514 spin_lock_irqsave(&info->lock,flags);
4515 rx_start(info);
4516 spin_unlock_irqrestore(&info->lock,flags);
4517 }
4518 goto cleanup;
4519 }
4520 }
4521
4522 /* status
4523 *
4524 * 15 buffer complete
4525 * 14..06 reserved
4526 * 05..04 residue
4527 * 02 eof (end of frame)
4528 * 01 CRC error
4529 * 00 abort
4530 */
4531 status = desc_status(info->rbufs[end]);
4532
4533 /* ignore CRC bit if not using CRC (bit is undefined) */
4534 if ((info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_NONE)
4535 status &= ~BIT1;
4536
4537 if (framesize == 0 ||
4538 (addr_field != 0xff && addr_field != info->params.addr_filter)) {
4539 free_rbufs(info, start, end);
4540 goto check_again;
4541 }
4542
4543 if (framesize < (2 + crc_size) || status & BIT0) {
4544 info->icount.rxshort++;
4545 framesize = 0;
4546 } else if (status & BIT1) {
4547 info->icount.rxcrc++;
4548 if (!(info->params.crc_type & HDLC_CRC_RETURN_EX))
4549 framesize = 0;
4550 }
4551
4552 #if SYNCLINK_GENERIC_HDLC
4553 if (framesize == 0) {
4554 struct net_device_stats *stats = hdlc_stats(info->netdev);
4555 stats->rx_errors++;
4556 stats->rx_frame_errors++;
4557 }
4558 #endif
4559
4560 DBGBH(("%s rx frame status=%04X size=%d\n",
4561 info->device_name, status, framesize));
4562 DBGDATA(info, info->rbufs[start].buf, min_t(int, framesize, DMABUFSIZE), "rx");
4563
4564 if (framesize) {
4565 if (!(info->params.crc_type & HDLC_CRC_RETURN_EX)) {
4566 framesize -= crc_size;
4567 crc_size = 0;
4568 }
4569
4570 if (framesize > info->max_frame_size + crc_size)
4571 info->icount.rxlong++;
4572 else {
4573 /* copy dma buffer(s) to contiguous temp buffer */
4574 int copy_count = framesize;
4575 int i = start;
4576 unsigned char *p = info->tmp_rbuf;
4577 info->tmp_rbuf_count = framesize;
4578
4579 info->icount.rxok++;
4580
4581 while(copy_count) {
4582 int partial_count = min(copy_count, DMABUFSIZE);
4583 memcpy(p, info->rbufs[i].buf, partial_count);
4584 p += partial_count;
4585 copy_count -= partial_count;
4586 if (++i == info->rbuf_count)
4587 i = 0;
4588 }
4589
4590 if (info->params.crc_type & HDLC_CRC_RETURN_EX) {
4591 *p = (status & BIT1) ? RX_CRC_ERROR : RX_OK;
4592 framesize++;
4593 }
4594
4595 #if SYNCLINK_GENERIC_HDLC
4596 if (info->netcount)
4597 hdlcdev_rx(info,info->tmp_rbuf, framesize);
4598 else
4599 #endif
4600 ldisc_receive_buf(tty, info->tmp_rbuf, info->flag_buf, framesize);
4601 }
4602 }
4603 free_rbufs(info, start, end);
4604 rc = 1;
4605
4606 cleanup:
4607 return rc;
4608 }
4609
4610 /*
4611 * pass receive buffer (RAW synchronous mode) to tty layer
4612 * return 1 if buffer available, otherwise 0
4613 */
4614 static int rx_get_buf(struct slgt_info *info)
4615 {
4616 unsigned int i = info->rbuf_current;
4617 unsigned int count;
4618
4619 if (!desc_complete(info->rbufs[i]))
4620 return 0;
4621 count = desc_count(info->rbufs[i]);
4622 switch(info->params.mode) {
4623 case MGSL_MODE_MONOSYNC:
4624 case MGSL_MODE_BISYNC:
4625 /* ignore residue in byte synchronous modes */
4626 if (desc_residue(info->rbufs[i]))
4627 count--;
4628 break;
4629 }
4630 DBGDATA(info, info->rbufs[i].buf, count, "rx");
4631 DBGINFO(("rx_get_buf size=%d\n", count));
4632 if (count)
4633 ldisc_receive_buf(info->tty, info->rbufs[i].buf,
4634 info->flag_buf, count);
4635 free_rbufs(info, i, i);
4636 return 1;
4637 }
4638
4639 static void reset_tbufs(struct slgt_info *info)
4640 {
4641 unsigned int i;
4642 info->tbuf_current = 0;
4643 for (i=0 ; i < info->tbuf_count ; i++) {
4644 info->tbufs[i].status = 0;
4645 info->tbufs[i].count = 0;
4646 }
4647 }
4648
4649 /*
4650 * return number of free transmit DMA buffers
4651 */
4652 static unsigned int free_tbuf_count(struct slgt_info *info)
4653 {
4654 unsigned int count = 0;
4655 unsigned int i = info->tbuf_current;
4656
4657 do
4658 {
4659 if (desc_count(info->tbufs[i]))
4660 break; /* buffer in use */
4661 ++count;
4662 if (++i == info->tbuf_count)
4663 i=0;
4664 } while (i != info->tbuf_current);
4665
4666 /* if tx DMA active, last zero count buffer is in use */
4667 if (count && (rd_reg32(info, TDCSR) & BIT0))
4668 --count;
4669
4670 return count;
4671 }
4672
4673 /*
4674 * load transmit DMA buffer(s) with data
4675 */
4676 static void tx_load(struct slgt_info *info, const char *buf, unsigned int size)
4677 {
4678 unsigned short count;
4679 unsigned int i;
4680 struct slgt_desc *d;
4681
4682 if (size == 0)
4683 return;
4684
4685 DBGDATA(info, buf, size, "tx");
4686
4687 info->tbuf_start = i = info->tbuf_current;
4688
4689 while (size) {
4690 d = &info->tbufs[i];
4691 if (++i == info->tbuf_count)
4692 i = 0;
4693
4694 count = (unsigned short)((size > DMABUFSIZE) ? DMABUFSIZE : size);
4695 memcpy(d->buf, buf, count);
4696
4697 size -= count;
4698 buf += count;
4699
4700 /*
4701 * set EOF bit for last buffer of HDLC frame or
4702 * for every buffer in raw mode
4703 */
4704 if ((!size && info->params.mode == MGSL_MODE_HDLC) ||
4705 info->params.mode == MGSL_MODE_RAW)
4706 set_desc_eof(*d, 1);
4707 else
4708 set_desc_eof(*d, 0);
4709
4710 set_desc_count(*d, count);
4711 }
4712
4713 info->tbuf_current = i;
4714 }
4715
4716 static int register_test(struct slgt_info *info)
4717 {
4718 static unsigned short patterns[] =
4719 {0x0000, 0xffff, 0xaaaa, 0x5555, 0x6969, 0x9696};
4720 static unsigned int count = sizeof(patterns)/sizeof(patterns[0]);
4721 unsigned int i;
4722 int rc = 0;
4723
4724 for (i=0 ; i < count ; i++) {
4725 wr_reg16(info, TIR, patterns[i]);
4726 wr_reg16(info, BDR, patterns[(i+1)%count]);
4727 if ((rd_reg16(info, TIR) != patterns[i]) ||
4728 (rd_reg16(info, BDR) != patterns[(i+1)%count])) {
4729 rc = -ENODEV;
4730 break;
4731 }
4732 }
4733 info->gpio_present = (rd_reg32(info, JCR) & BIT5) ? 1 : 0;
4734 info->init_error = rc ? 0 : DiagStatus_AddressFailure;
4735 return rc;
4736 }
4737
4738 static int irq_test(struct slgt_info *info)
4739 {
4740 unsigned long timeout;
4741 unsigned long flags;
4742 struct tty_struct *oldtty = info->tty;
4743 u32 speed = info->params.data_rate;
4744
4745 info->params.data_rate = 921600;
4746 info->tty = NULL;
4747
4748 spin_lock_irqsave(&info->lock, flags);
4749 async_mode(info);
4750 slgt_irq_on(info, IRQ_TXIDLE);
4751
4752 /* enable transmitter */
4753 wr_reg16(info, TCR,
4754 (unsigned short)(rd_reg16(info, TCR) | BIT1));
4755
4756 /* write one byte and wait for tx idle */
4757 wr_reg16(info, TDR, 0);
4758
4759 /* assume failure */
4760 info->init_error = DiagStatus_IrqFailure;
4761 info->irq_occurred = FALSE;
4762
4763 spin_unlock_irqrestore(&info->lock, flags);
4764
4765 timeout=100;
4766 while(timeout-- && !info->irq_occurred)
4767 msleep_interruptible(10);
4768
4769 spin_lock_irqsave(&info->lock,flags);
4770 reset_port(info);
4771 spin_unlock_irqrestore(&info->lock,flags);
4772
4773 info->params.data_rate = speed;
4774 info->tty = oldtty;
4775
4776 info->init_error = info->irq_occurred ? 0 : DiagStatus_IrqFailure;
4777 return info->irq_occurred ? 0 : -ENODEV;
4778 }
4779
4780 static int loopback_test_rx(struct slgt_info *info)
4781 {
4782 unsigned char *src, *dest;
4783 int count;
4784
4785 if (desc_complete(info->rbufs[0])) {
4786 count = desc_count(info->rbufs[0]);
4787 src = info->rbufs[0].buf;
4788 dest = info->tmp_rbuf;
4789
4790 for( ; count ; count-=2, src+=2) {
4791 /* src=data byte (src+1)=status byte */
4792 if (!(*(src+1) & (BIT9 + BIT8))) {
4793 *dest = *src;
4794 dest++;
4795 info->tmp_rbuf_count++;
4796 }
4797 }
4798 DBGDATA(info, info->tmp_rbuf, info->tmp_rbuf_count, "rx");
4799 return 1;
4800 }
4801 return 0;
4802 }
4803
4804 static int loopback_test(struct slgt_info *info)
4805 {
4806 #define TESTFRAMESIZE 20
4807
4808 unsigned long timeout;
4809 u16 count = TESTFRAMESIZE;
4810 unsigned char buf[TESTFRAMESIZE];
4811 int rc = -ENODEV;
4812 unsigned long flags;
4813
4814 struct tty_struct *oldtty = info->tty;
4815 MGSL_PARAMS params;
4816
4817 memcpy(&params, &info->params, sizeof(params));
4818
4819 info->params.mode = MGSL_MODE_ASYNC;
4820 info->params.data_rate = 921600;
4821 info->params.loopback = 1;
4822 info->tty = NULL;
4823
4824 /* build and send transmit frame */
4825 for (count = 0; count < TESTFRAMESIZE; ++count)
4826 buf[count] = (unsigned char)count;
4827
4828 info->tmp_rbuf_count = 0;
4829 memset(info->tmp_rbuf, 0, TESTFRAMESIZE);
4830
4831 /* program hardware for HDLC and enabled receiver */
4832 spin_lock_irqsave(&info->lock,flags);
4833 async_mode(info);
4834 rx_start(info);
4835 info->tx_count = count;
4836 tx_load(info, buf, count);
4837 tx_start(info);
4838 spin_unlock_irqrestore(&info->lock, flags);
4839
4840 /* wait for receive complete */
4841 for (timeout = 100; timeout; --timeout) {
4842 msleep_interruptible(10);
4843 if (loopback_test_rx(info)) {
4844 rc = 0;
4845 break;
4846 }
4847 }
4848
4849 /* verify received frame length and contents */
4850 if (!rc && (info->tmp_rbuf_count != count ||
4851 memcmp(buf, info->tmp_rbuf, count))) {
4852 rc = -ENODEV;
4853 }
4854
4855 spin_lock_irqsave(&info->lock,flags);
4856 reset_adapter(info);
4857 spin_unlock_irqrestore(&info->lock,flags);
4858
4859 memcpy(&info->params, &params, sizeof(info->params));
4860 info->tty = oldtty;
4861
4862 info->init_error = rc ? DiagStatus_DmaFailure : 0;
4863 return rc;
4864 }
4865
4866 static int adapter_test(struct slgt_info *info)
4867 {
4868 DBGINFO(("testing %s\n", info->device_name));
4869 if (register_test(info) < 0) {
4870 printk("register test failure %s addr=%08X\n",
4871 info->device_name, info->phys_reg_addr);
4872 } else if (irq_test(info) < 0) {
4873 printk("IRQ test failure %s IRQ=%d\n",
4874 info->device_name, info->irq_level);
4875 } else if (loopback_test(info) < 0) {
4876 printk("loopback test failure %s\n", info->device_name);
4877 }
4878 return info->init_error;
4879 }
4880
4881 /*
4882 * transmit timeout handler
4883 */
4884 static void tx_timeout(unsigned long context)
4885 {
4886 struct slgt_info *info = (struct slgt_info*)context;
4887 unsigned long flags;
4888
4889 DBGINFO(("%s tx_timeout\n", info->device_name));
4890 if(info->tx_active && info->params.mode == MGSL_MODE_HDLC) {
4891 info->icount.txtimeout++;
4892 }
4893 spin_lock_irqsave(&info->lock,flags);
4894 info->tx_active = 0;
4895 info->tx_count = 0;
4896 spin_unlock_irqrestore(&info->lock,flags);
4897
4898 #if SYNCLINK_GENERIC_HDLC
4899 if (info->netcount)
4900 hdlcdev_tx_done(info);
4901 else
4902 #endif
4903 bh_transmit(info);
4904 }
4905
4906 /*
4907 * receive buffer polling timer
4908 */
4909 static void rx_timeout(unsigned long context)
4910 {
4911 struct slgt_info *info = (struct slgt_info*)context;
4912 unsigned long flags;
4913
4914 DBGINFO(("%s rx_timeout\n", info->device_name));
4915 spin_lock_irqsave(&info->lock, flags);
4916 info->pending_bh |= BH_RECEIVE;
4917 spin_unlock_irqrestore(&info->lock, flags);
4918 bh_handler(&info->task);
4919 }
4920
WRT350N Kernel Patches