Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney...
[wrt350n-kernel.git] / drivers / char / ds1620.c
blob334ad5bbe6b62a244eed91b9731d121244ea4780
1 /*
2 * linux/drivers/char/ds1620.c: Dallas Semiconductors DS1620
3 * thermometer driver (as used in the Rebel.com NetWinder)
4 */
5 #include <linux/module.h>
6 #include <linux/miscdevice.h>
7 #include <linux/delay.h>
8 #include <linux/proc_fs.h>
9 #include <linux/capability.h>
10 #include <linux/init.h>
12 #include <asm/hardware.h>
13 #include <asm/mach-types.h>
14 #include <asm/uaccess.h>
15 #include <asm/therm.h>
17 #ifdef CONFIG_PROC_FS
18 /* define for /proc interface */
19 #define THERM_USE_PROC
20 #endif
22 /* Definitions for DS1620 chip */
23 #define THERM_START_CONVERT 0xee
24 #define THERM_RESET 0xaf
25 #define THERM_READ_CONFIG 0xac
26 #define THERM_READ_TEMP 0xaa
27 #define THERM_READ_TL 0xa2
28 #define THERM_READ_TH 0xa1
29 #define THERM_WRITE_CONFIG 0x0c
30 #define THERM_WRITE_TL 0x02
31 #define THERM_WRITE_TH 0x01
33 #define CFG_CPU 2
34 #define CFG_1SHOT 1
36 static const char *fan_state[] = { "off", "on", "on (hardwired)" };
39 * Start of NetWinder specifics
40 * Note! We have to hold the gpio lock with IRQs disabled over the
41 * whole of our transaction to the Dallas chip, since there is a
42 * chance that the WaveArtist driver could touch these bits to
43 * enable or disable the speaker.
45 extern spinlock_t gpio_lock;
46 extern unsigned int system_rev;
48 static inline void netwinder_ds1620_set_clk(int clk)
50 gpio_modify_op(GPIO_DSCLK, clk ? GPIO_DSCLK : 0);
53 static inline void netwinder_ds1620_set_data(int dat)
55 gpio_modify_op(GPIO_DATA, dat ? GPIO_DATA : 0);
58 static inline int netwinder_ds1620_get_data(void)
60 return gpio_read() & GPIO_DATA;
63 static inline void netwinder_ds1620_set_data_dir(int dir)
65 gpio_modify_io(GPIO_DATA, dir ? GPIO_DATA : 0);
68 static inline void netwinder_ds1620_reset(void)
70 cpld_modify(CPLD_DS_ENABLE, 0);
71 cpld_modify(CPLD_DS_ENABLE, CPLD_DS_ENABLE);
74 static inline void netwinder_lock(unsigned long *flags)
76 spin_lock_irqsave(&gpio_lock, *flags);
79 static inline void netwinder_unlock(unsigned long *flags)
81 spin_unlock_irqrestore(&gpio_lock, *flags);
84 static inline void netwinder_set_fan(int i)
86 unsigned long flags;
88 spin_lock_irqsave(&gpio_lock, flags);
89 gpio_modify_op(GPIO_FAN, i ? GPIO_FAN : 0);
90 spin_unlock_irqrestore(&gpio_lock, flags);
93 static inline int netwinder_get_fan(void)
95 if ((system_rev & 0xf000) == 0x4000)
96 return FAN_ALWAYS_ON;
98 return (gpio_read() & GPIO_FAN) ? FAN_ON : FAN_OFF;
102 * End of NetWinder specifics
105 static void ds1620_send_bits(int nr, int value)
107 int i;
109 for (i = 0; i < nr; i++) {
110 netwinder_ds1620_set_data(value & 1);
111 netwinder_ds1620_set_clk(0);
112 udelay(1);
113 netwinder_ds1620_set_clk(1);
114 udelay(1);
116 value >>= 1;
120 static unsigned int ds1620_recv_bits(int nr)
122 unsigned int value = 0, mask = 1;
123 int i;
125 netwinder_ds1620_set_data(0);
127 for (i = 0; i < nr; i++) {
128 netwinder_ds1620_set_clk(0);
129 udelay(1);
131 if (netwinder_ds1620_get_data())
132 value |= mask;
134 mask <<= 1;
136 netwinder_ds1620_set_clk(1);
137 udelay(1);
140 return value;
143 static void ds1620_out(int cmd, int bits, int value)
145 unsigned long flags;
147 netwinder_lock(&flags);
148 netwinder_ds1620_set_clk(1);
149 netwinder_ds1620_set_data_dir(0);
150 netwinder_ds1620_reset();
152 udelay(1);
154 ds1620_send_bits(8, cmd);
155 if (bits)
156 ds1620_send_bits(bits, value);
158 udelay(1);
160 netwinder_ds1620_reset();
161 netwinder_unlock(&flags);
163 msleep(20);
166 static unsigned int ds1620_in(int cmd, int bits)
168 unsigned long flags;
169 unsigned int value;
171 netwinder_lock(&flags);
172 netwinder_ds1620_set_clk(1);
173 netwinder_ds1620_set_data_dir(0);
174 netwinder_ds1620_reset();
176 udelay(1);
178 ds1620_send_bits(8, cmd);
180 netwinder_ds1620_set_data_dir(1);
181 value = ds1620_recv_bits(bits);
183 netwinder_ds1620_reset();
184 netwinder_unlock(&flags);
186 return value;
189 static int cvt_9_to_int(unsigned int val)
191 if (val & 0x100)
192 val |= 0xfffffe00;
194 return val;
197 static void ds1620_write_state(struct therm *therm)
199 ds1620_out(THERM_WRITE_CONFIG, 8, CFG_CPU);
200 ds1620_out(THERM_WRITE_TL, 9, therm->lo);
201 ds1620_out(THERM_WRITE_TH, 9, therm->hi);
202 ds1620_out(THERM_START_CONVERT, 0, 0);
205 static void ds1620_read_state(struct therm *therm)
207 therm->lo = cvt_9_to_int(ds1620_in(THERM_READ_TL, 9));
208 therm->hi = cvt_9_to_int(ds1620_in(THERM_READ_TH, 9));
211 static ssize_t
212 ds1620_read(struct file *file, char __user *buf, size_t count, loff_t *ptr)
214 signed int cur_temp;
215 signed char cur_temp_degF;
217 cur_temp = cvt_9_to_int(ds1620_in(THERM_READ_TEMP, 9)) >> 1;
219 /* convert to Fahrenheit, as per wdt.c */
220 cur_temp_degF = (cur_temp * 9) / 5 + 32;
222 if (copy_to_user(buf, &cur_temp_degF, 1))
223 return -EFAULT;
225 return 1;
228 static int
229 ds1620_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
231 struct therm therm;
232 union {
233 struct therm __user *therm;
234 int __user *i;
235 } uarg;
236 int i;
238 uarg.i = (int __user *)arg;
240 switch(cmd) {
241 case CMD_SET_THERMOSTATE:
242 case CMD_SET_THERMOSTATE2:
243 if (!capable(CAP_SYS_ADMIN))
244 return -EPERM;
246 if (cmd == CMD_SET_THERMOSTATE) {
247 if (get_user(therm.hi, uarg.i))
248 return -EFAULT;
249 therm.lo = therm.hi - 3;
250 } else {
251 if (copy_from_user(&therm, uarg.therm, sizeof(therm)))
252 return -EFAULT;
255 therm.lo <<= 1;
256 therm.hi <<= 1;
258 ds1620_write_state(&therm);
259 break;
261 case CMD_GET_THERMOSTATE:
262 case CMD_GET_THERMOSTATE2:
263 ds1620_read_state(&therm);
265 therm.lo >>= 1;
266 therm.hi >>= 1;
268 if (cmd == CMD_GET_THERMOSTATE) {
269 if (put_user(therm.hi, uarg.i))
270 return -EFAULT;
271 } else {
272 if (copy_to_user(uarg.therm, &therm, sizeof(therm)))
273 return -EFAULT;
275 break;
277 case CMD_GET_TEMPERATURE:
278 case CMD_GET_TEMPERATURE2:
279 i = cvt_9_to_int(ds1620_in(THERM_READ_TEMP, 9));
281 if (cmd == CMD_GET_TEMPERATURE)
282 i >>= 1;
284 return put_user(i, uarg.i) ? -EFAULT : 0;
286 case CMD_GET_STATUS:
287 i = ds1620_in(THERM_READ_CONFIG, 8) & 0xe3;
289 return put_user(i, uarg.i) ? -EFAULT : 0;
291 case CMD_GET_FAN:
292 i = netwinder_get_fan();
294 return put_user(i, uarg.i) ? -EFAULT : 0;
296 case CMD_SET_FAN:
297 if (!capable(CAP_SYS_ADMIN))
298 return -EPERM;
300 if (get_user(i, uarg.i))
301 return -EFAULT;
303 netwinder_set_fan(i);
304 break;
306 default:
307 return -ENOIOCTLCMD;
310 return 0;
313 #ifdef THERM_USE_PROC
314 static int
315 proc_therm_ds1620_read(char *buf, char **start, off_t offset,
316 int len, int *eof, void *unused)
318 struct therm th;
319 int temp;
321 ds1620_read_state(&th);
322 temp = cvt_9_to_int(ds1620_in(THERM_READ_TEMP, 9));
324 len = sprintf(buf, "Thermostat: HI %i.%i, LOW %i.%i; "
325 "temperature: %i.%i C, fan %s\n",
326 th.hi >> 1, th.hi & 1 ? 5 : 0,
327 th.lo >> 1, th.lo & 1 ? 5 : 0,
328 temp >> 1, temp & 1 ? 5 : 0,
329 fan_state[netwinder_get_fan()]);
331 return len;
334 static struct proc_dir_entry *proc_therm_ds1620;
335 #endif
337 static const struct file_operations ds1620_fops = {
338 .owner = THIS_MODULE,
339 .open = nonseekable_open,
340 .read = ds1620_read,
341 .ioctl = ds1620_ioctl,
344 static struct miscdevice ds1620_miscdev = {
345 TEMP_MINOR,
346 "temp",
347 &ds1620_fops
350 static int __init ds1620_init(void)
352 int ret;
353 struct therm th, th_start;
355 if (!machine_is_netwinder())
356 return -ENODEV;
358 ds1620_out(THERM_RESET, 0, 0);
359 ds1620_out(THERM_WRITE_CONFIG, 8, CFG_CPU);
360 ds1620_out(THERM_START_CONVERT, 0, 0);
363 * Trigger the fan to start by setting
364 * temperature high point low. This kicks
365 * the fan into action.
367 ds1620_read_state(&th);
368 th_start.lo = 0;
369 th_start.hi = 1;
370 ds1620_write_state(&th_start);
372 msleep(2000);
374 ds1620_write_state(&th);
376 ret = misc_register(&ds1620_miscdev);
377 if (ret < 0)
378 return ret;
380 #ifdef THERM_USE_PROC
381 proc_therm_ds1620 = create_proc_entry("therm", 0, NULL);
382 if (proc_therm_ds1620)
383 proc_therm_ds1620->read_proc = proc_therm_ds1620_read;
384 else
385 printk(KERN_ERR "therm: unable to register /proc/therm\n");
386 #endif
388 ds1620_read_state(&th);
389 ret = cvt_9_to_int(ds1620_in(THERM_READ_TEMP, 9));
391 printk(KERN_INFO "Thermostat: high %i.%i, low %i.%i, "
392 "current %i.%i C, fan %s.\n",
393 th.hi >> 1, th.hi & 1 ? 5 : 0,
394 th.lo >> 1, th.lo & 1 ? 5 : 0,
395 ret >> 1, ret & 1 ? 5 : 0,
396 fan_state[netwinder_get_fan()]);
398 return 0;
401 static void __exit ds1620_exit(void)
403 #ifdef THERM_USE_PROC
404 remove_proc_entry("therm", NULL);
405 #endif
406 misc_deregister(&ds1620_miscdev);
409 module_init(ds1620_init);
410 module_exit(ds1620_exit);
412 MODULE_LICENSE("GPL");