arch/arm/mach-pxa/cm-x270.c

   1 /*
   2  * linux/arch/arm/mach-pxa/cm-x270.c
   3  *
   4  * Copyright (C) 2007 CompuLab, Ltd.
   5  * Mike Rapoport <mike@compulab.co.il>
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License version 2 as
   9  * published by the Free Software Foundation.
  10  */
  11
  12 #include <linux/types.h>
  13 #include <linux/pm.h>
  14 #include <linux/fb.h>
  15 #include <linux/platform_device.h>
  16 #include <linux/irq.h>
  17 #include <linux/sysdev.h>
  18 #include <linux/io.h>
  19 #include <linux/delay.h>
  20
  21 #include <linux/dm9000.h>
  22 #include <linux/rtc-v3020.h>
  23 #include <linux/serial_8250.h>
  24
  25 #include <video/mbxfb.h>
  26
  27 #include <asm/mach/arch.h>
  28 #include <asm/mach-types.h>
  29 #include <asm/mach/map.h>
  30
  31 #include <asm/arch/pxa-regs.h>
  32 #include <asm/arch/pxafb.h>
  33 #include <asm/arch/ohci.h>
  34 #include <asm/arch/mmc.h>
  35 #include <asm/arch/bitfield.h>
  36 #include <asm/arch/cm-x270.h>
  37
  38 #include <asm/hardware/it8152.h>
  39
  40 #include "generic.h"
  41 #include "cm-x270-pci.h"
  42
  43 #define RTC_PHYS_BASE           (PXA_CS1_PHYS + (5 << 22))
  44 #define DM9000_PHYS_BASE        (PXA_CS1_PHYS + (6 << 22))
  45
  46 static struct resource cmx270_dm9k_resource[] = {
  47         [0] = {
  48                 .start = DM9000_PHYS_BASE,
  49                 .end   = DM9000_PHYS_BASE + 4,
  50                 .flags = IORESOURCE_MEM,
  51         },
  52         [1] = {
  53                 .start = DM9000_PHYS_BASE + 8,
  54                 .end   = DM9000_PHYS_BASE + 8 + 500,
  55                 .flags = IORESOURCE_MEM,
  56         },
  57         [2] = {
  58                 .start = CMX270_ETHIRQ,
  59                 .end   = CMX270_ETHIRQ,
  60                 .flags = IORESOURCE_IRQ,
  61         }
  62 };
  63
  64 /* for the moment we limit ourselves to 32bit IO until some
  65  * better IO routines can be written and tested
  66  */
  67 static struct dm9000_plat_data cmx270_dm9k_platdata = {
  68         .flags          = DM9000_PLATF_32BITONLY,
  69 };
  70
  71 /* Ethernet device */
  72 static struct platform_device cmx270_device_dm9k = {
  73         .name           = "dm9000",
  74         .id             = 0,
  75         .num_resources  = ARRAY_SIZE(cmx270_dm9k_resource),
  76         .resource       = cmx270_dm9k_resource,
  77         .dev            = {
  78                 .platform_data = &cmx270_dm9k_platdata,
  79         }
  80 };
  81
  82 /* audio device */
  83 static struct platform_device cmx270_audio_device = {
  84         .name           = "pxa2xx-ac97",
  85         .id             = -1,
  86 };
  87
  88 /* touchscreen controller */
  89 static struct platform_device cmx270_ts_device = {
  90         .name           = "ucb1400_ts",
  91         .id             = -1,
  92 };
  93
  94 /* RTC */
  95 static struct resource cmx270_v3020_resource[] = {
  96         [0] = {
  97                 .start = RTC_PHYS_BASE,
  98                 .end   = RTC_PHYS_BASE + 4,
  99                 .flags = IORESOURCE_MEM,
 100         },
 101 };
 102
 103 struct v3020_platform_data cmx270_v3020_pdata = {
 104         .leftshift = 16,
 105 };
 106
 107 static struct platform_device cmx270_rtc_device = {
 108         .name           = "v3020",
 109         .num_resources  = ARRAY_SIZE(cmx270_v3020_resource),
 110         .resource       = cmx270_v3020_resource,
 111         .id             = -1,
 112         .dev            = {
 113                 .platform_data = &cmx270_v3020_pdata,
 114         }
 115 };
 116
 117 /*
 118  * CM-X270 LEDs
 119  */
 120 static struct platform_device cmx270_led_device = {
 121         .name           = "cm-x270-led",
 122         .id             = -1,
 123 };
 124
 125 /* 2700G graphics */
 126 static u64 fb_dma_mask = ~(u64)0;
 127
 128 static struct resource cmx270_2700G_resource[] = {
 129         /* frame buffer memory including ODFB and External SDRAM */
 130         [0] = {
 131                 .start = MARATHON_PHYS,
 132                 .end   = MARATHON_PHYS + 0x02000000,
 133                 .flags = IORESOURCE_MEM,
 134         },
 135         /* Marathon registers */
 136         [1] = {
 137                 .start = MARATHON_PHYS + 0x03fe0000,
 138                 .end   = MARATHON_PHYS + 0x03ffffff,
 139                 .flags = IORESOURCE_MEM,
 140         },
 141 };
 142
 143 static unsigned long save_lcd_regs[10];
 144
 145 static int cmx270_marathon_probe(struct fb_info *fb)
 146 {
 147         /* save PXA-270 pin settings before enabling 2700G */
 148         save_lcd_regs[0] = GPDR1;
 149         save_lcd_regs[1] = GPDR2;
 150         save_lcd_regs[2] = GAFR1_U;
 151         save_lcd_regs[3] = GAFR2_L;
 152         save_lcd_regs[4] = GAFR2_U;
 153
 154         /* Disable PXA-270 on-chip controller driving pins */
 155         GPDR1 &= ~(0xfc000000);
 156         GPDR2 &= ~(0x00c03fff);
 157         GAFR1_U &= ~(0xfff00000);
 158         GAFR2_L &= ~(0x0fffffff);
 159         GAFR2_U &= ~(0x0000f000);
 160         return 0;
 161 }
 162
 163 static int cmx270_marathon_remove(struct fb_info *fb)
 164 {
 165         GPDR1 =   save_lcd_regs[0];
 166         GPDR2 =   save_lcd_regs[1];
 167         GAFR1_U = save_lcd_regs[2];
 168         GAFR2_L = save_lcd_regs[3];
 169         GAFR2_U = save_lcd_regs[4];
 170         return 0;
 171 }
 172
 173 static struct mbxfb_platform_data cmx270_2700G_data = {
 174         .xres = {
 175                 .min = 240,
 176                 .max = 1200,
 177                 .defval = 640,
 178         },
 179         .yres = {
 180                 .min = 240,
 181                 .max = 1200,
 182                 .defval = 480,
 183         },
 184         .bpp = {
 185                 .min = 16,
 186                 .max = 32,
 187                 .defval = 16,
 188         },
 189         .memsize = 8*1024*1024,
 190         .probe = cmx270_marathon_probe,
 191         .remove = cmx270_marathon_remove,
 192 };
 193
 194 static struct platform_device cmx270_2700G = {
 195         .name           = "mbx-fb",
 196         .dev            = {
 197                 .platform_data  = &cmx270_2700G_data,
 198                 .dma_mask       = &fb_dma_mask,
 199                 .coherent_dma_mask = 0xffffffff,
 200         },
 201         .num_resources  = ARRAY_SIZE(cmx270_2700G_resource),
 202         .resource       = cmx270_2700G_resource,
 203         .id             = -1,
 204 };
 205
 206 static u64 ata_dma_mask = ~(u64)0;
 207
 208 static struct platform_device cmx270_ata = {
 209         .name = "pata_cm_x270",
 210         .id = -1,
 211         .dev            = {
 212                 .dma_mask       = &ata_dma_mask,
 213                 .coherent_dma_mask = 0xffffffff,
 214         },
 215 };
 216
 217 /* platform devices */
 218 static struct platform_device *platform_devices[] __initdata = {
 219         &cmx270_device_dm9k,
 220         &cmx270_audio_device,
 221         &cmx270_rtc_device,
 222         &cmx270_2700G,
 223         &cmx270_led_device,
 224         &cmx270_ts_device,
 225         &cmx270_ata,
 226 };
 227
 228 /* Map PCI companion and IDE/General Purpose CS statically */
 229 static struct map_desc cmx270_io_desc[] __initdata = {
 230         [0] = { /* IDE/general purpose space */
 231                 .virtual        = CMX270_IDE104_VIRT,
 232                 .pfn            = __phys_to_pfn(CMX270_IDE104_PHYS),
 233                 .length         = SZ_64M - SZ_8M,
 234                 .type           = MT_DEVICE
 235         },
 236         [1] = { /* PCI bridge */
 237                 .virtual        = CMX270_IT8152_VIRT,
 238                 .pfn            = __phys_to_pfn(CMX270_IT8152_PHYS),
 239                 .length         = SZ_64M,
 240                 .type           = MT_DEVICE
 241         },
 242 };
 243
 244 /*
 245   Display definitions
 246   keep these for backwards compatibility, although symbolic names (as
 247   e.g. in lpd270.c) looks better
 248 */
 249 #define MTYPE_STN320x240        0
 250 #define MTYPE_TFT640x480        1
 251 #define MTYPE_CRT640x480        2
 252 #define MTYPE_CRT800x600        3
 253 #define MTYPE_TFT320x240        6
 254 #define MTYPE_STN640x480        7
 255
 256 static struct pxafb_mode_info generic_stn_320x240_mode = {
 257         .pixclock       = 76923,
 258         .bpp            = 8,
 259         .xres           = 320,
 260         .yres           = 240,
 261         .hsync_len      = 3,
 262         .vsync_len      = 2,
 263         .left_margin    = 3,
 264         .upper_margin   = 0,
 265         .right_margin   = 3,
 266         .lower_margin   = 0,
 267         .sync           = (FB_SYNC_HOR_HIGH_ACT |
 268                            FB_SYNC_VERT_HIGH_ACT),
 269         .cmap_greyscale = 0,
 270 };
 271
 272 static struct pxafb_mach_info generic_stn_320x240 = {
 273         .modes          = &generic_stn_320x240_mode,
 274         .num_modes      = 1,
 275         .lccr0          = 0,
 276         .lccr3          = (LCCR3_PixClkDiv(0x03) |
 277                            LCCR3_Acb(0xff) |
 278                            LCCR3_PCP),
 279         .cmap_inverse   = 0,
 280         .cmap_static    = 0,
 281 };
 282
 283 static struct pxafb_mode_info generic_tft_640x480_mode = {
 284         .pixclock       = 38461,
 285         .bpp            = 8,
 286         .xres           = 640,
 287         .yres           = 480,
 288         .hsync_len      = 60,
 289         .vsync_len      = 2,
 290         .left_margin    = 70,
 291         .upper_margin   = 10,
 292         .right_margin   = 70,
 293         .lower_margin   = 5,
 294         .sync           = 0,
 295         .cmap_greyscale = 0,
 296 };
 297
 298 static struct pxafb_mach_info generic_tft_640x480 = {
 299         .modes          = &generic_tft_640x480_mode,
 300         .num_modes      = 1,
 301         .lccr0          = (LCCR0_PAS),
 302         .lccr3          = (LCCR3_PixClkDiv(0x01) |
 303                            LCCR3_Acb(0xff) |
 304                            LCCR3_PCP),
 305         .cmap_inverse   = 0,
 306         .cmap_static    = 0,
 307 };
 308
 309 static struct pxafb_mode_info generic_crt_640x480_mode = {
 310         .pixclock       = 38461,
 311         .bpp            = 8,
 312         .xres           = 640,
 313         .yres           = 480,
 314         .hsync_len      = 63,
 315         .vsync_len      = 2,
 316         .left_margin    = 81,
 317         .upper_margin   = 33,
 318         .right_margin   = 16,
 319         .lower_margin   = 10,
 320         .sync           = (FB_SYNC_HOR_HIGH_ACT |
 321                            FB_SYNC_VERT_HIGH_ACT),
 322         .cmap_greyscale = 0,
 323 };
 324
 325 static struct pxafb_mach_info generic_crt_640x480 = {
 326         .modes          = &generic_crt_640x480_mode,
 327         .num_modes      = 1,
 328         .lccr0          = (LCCR0_PAS),
 329         .lccr3          = (LCCR3_PixClkDiv(0x01) |
 330                            LCCR3_Acb(0xff)),
 331         .cmap_inverse   = 0,
 332         .cmap_static    = 0,
 333 };
 334
 335 static struct pxafb_mode_info generic_crt_800x600_mode = {
 336         .pixclock       = 28846,
 337         .bpp            = 8,
 338         .xres           = 800,
 339         .yres           = 600,
 340         .hsync_len      = 63,
 341         .vsync_len      = 2,
 342         .left_margin    = 26,
 343         .upper_margin   = 21,
 344         .right_margin   = 26,
 345         .lower_margin   = 11,
 346         .sync           = (FB_SYNC_HOR_HIGH_ACT |
 347                            FB_SYNC_VERT_HIGH_ACT),
 348         .cmap_greyscale = 0,
 349 };
 350
 351 static struct pxafb_mach_info generic_crt_800x600 = {
 352         .modes          = &generic_crt_800x600_mode,
 353         .num_modes      = 1,
 354         .lccr0          = (LCCR0_PAS),
 355         .lccr3          = (LCCR3_PixClkDiv(0x02) |
 356                            LCCR3_Acb(0xff)),
 357         .cmap_inverse   = 0,
 358         .cmap_static    = 0,
 359 };
 360
 361 static struct pxafb_mode_info generic_tft_320x240_mode = {
 362         .pixclock       = 134615,
 363         .bpp            = 16,
 364         .xres           = 320,
 365         .yres           = 240,
 366         .hsync_len      = 63,
 367         .vsync_len      = 7,
 368         .left_margin    = 75,
 369         .upper_margin   = 0,
 370         .right_margin   = 15,
 371         .lower_margin   = 15,
 372         .sync           = 0,
 373         .cmap_greyscale = 0,
 374 };
 375
 376 static struct pxafb_mach_info generic_tft_320x240 = {
 377         .modes          = &generic_tft_320x240_mode,
 378         .num_modes      = 1,
 379         .lccr0          = (LCCR0_PAS),
 380         .lccr3          = (LCCR3_PixClkDiv(0x06) |
 381                            LCCR3_Acb(0xff) |
 382                            LCCR3_PCP),
 383         .cmap_inverse   = 0,
 384         .cmap_static    = 0,
 385 };
 386
 387 static struct pxafb_mode_info generic_stn_640x480_mode = {
 388         .pixclock       = 57692,
 389         .bpp            = 8,
 390         .xres           = 640,
 391         .yres           = 480,
 392         .hsync_len      = 4,
 393         .vsync_len      = 2,
 394         .left_margin    = 10,
 395         .upper_margin   = 5,
 396         .right_margin   = 10,
 397         .lower_margin   = 5,
 398         .sync           = (FB_SYNC_HOR_HIGH_ACT |
 399                            FB_SYNC_VERT_HIGH_ACT),
 400         .cmap_greyscale = 0,
 401 };
 402
 403 static struct pxafb_mach_info generic_stn_640x480 = {
 404         .modes          = &generic_stn_640x480_mode,
 405         .num_modes      = 1,
 406         .lccr0          = 0,
 407         .lccr3          = (LCCR3_PixClkDiv(0x02) |
 408                            LCCR3_Acb(0xff)),
 409         .cmap_inverse   = 0,
 410         .cmap_static    = 0,
 411 };
 412
 413 static struct pxafb_mach_info *cmx270_display = &generic_crt_640x480;
 414
 415 static int __init cmx270_set_display(char *str)
 416 {
 417         int disp_type = simple_strtol(str, NULL, 0);
 418         switch (disp_type) {
 419         case MTYPE_STN320x240:
 420                 cmx270_display = &generic_stn_320x240;
 421                 break;
 422         case MTYPE_TFT640x480:
 423                 cmx270_display = &generic_tft_640x480;
 424                 break;
 425         case MTYPE_CRT640x480:
 426                 cmx270_display = &generic_crt_640x480;
 427                 break;
 428         case MTYPE_CRT800x600:
 429                 cmx270_display = &generic_crt_800x600;
 430                 break;
 431         case MTYPE_TFT320x240:
 432                 cmx270_display = &generic_tft_320x240;
 433                 break;
 434         case MTYPE_STN640x480:
 435                 cmx270_display = &generic_stn_640x480;
 436                 break;
 437         default: /* fallback to CRT 640x480 */
 438                 cmx270_display = &generic_crt_640x480;
 439                 break;
 440         }
 441         return 1;
 442 }
 443
 444 /*
 445    This should be done really early to get proper configuration for
 446    frame buffer.
 447    Indeed, pxafb parameters can be used istead, but CM-X270 bootloader
 448    has limitied line length for kernel command line, and also it will
 449    break compatibitlty with proprietary releases already in field.
 450 */
 451 __setup("monitor=", cmx270_set_display);
 452
 453 /* PXA27x OHCI controller setup */
 454 static int cmx270_ohci_init(struct device *dev)
 455 {
 456         /* Set the Power Control Polarity Low */
 457         UHCHR = (UHCHR | UHCHR_PCPL) &
 458                 ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE);
 459
 460         return 0;
 461 }
 462
 463 static struct pxaohci_platform_data cmx270_ohci_platform_data = {
 464         .port_mode      = PMM_PERPORT_MODE,
 465         .init           = cmx270_ohci_init,
 466 };
 467
 468
 469 static int cmx270_mci_init(struct device *dev,
 470                            irq_handler_t cmx270_detect_int,
 471                            void *data)
 472 {
 473         int err;
 474
 475         /*
 476          * setup GPIO for PXA27x MMC controller
 477          */
 478         pxa_gpio_mode(GPIO32_MMCCLK_MD);
 479         pxa_gpio_mode(GPIO112_MMCCMD_MD);
 480         pxa_gpio_mode(GPIO92_MMCDAT0_MD);
 481         pxa_gpio_mode(GPIO109_MMCDAT1_MD);
 482         pxa_gpio_mode(GPIO110_MMCDAT2_MD);
 483         pxa_gpio_mode(GPIO111_MMCDAT3_MD);
 484
 485         /* SB-X270 uses GPIO105 as SD power enable */
 486         pxa_gpio_mode(105 | GPIO_OUT);
 487
 488         /* card detect IRQ on GPIO 83 */
 489         pxa_gpio_mode(IRQ_TO_GPIO(CMX270_MMC_IRQ));
 490
 491         err = request_irq(CMX270_MMC_IRQ, cmx270_detect_int,
 492                           IRQF_DISABLED | IRQF_TRIGGER_FALLING,
 493                           "MMC card detect", data);
 494         if (err)
 495                 printk(KERN_ERR "cmx270_mci_init: MMC/SD: can't"
 496                        " request MMC card detect IRQ\n");
 497
 498         return err;
 499 }
 500
 501 static void cmx270_mci_setpower(struct device *dev, unsigned int vdd)
 502 {
 503         struct pxamci_platform_data *p_d = dev->platform_data;
 504
 505         if ((1 << vdd) & p_d->ocr_mask) {
 506                 printk(KERN_DEBUG "%s: on\n", __FUNCTION__);
 507                 GPCR(105) = GPIO_bit(105);
 508         } else {
 509                 GPSR(105) = GPIO_bit(105);
 510                 printk(KERN_DEBUG "%s: off\n", __FUNCTION__);
 511         }
 512 }
 513
 514 static void cmx270_mci_exit(struct device *dev, void *data)
 515 {
 516         free_irq(CMX270_MMC_IRQ, data);
 517 }
 518
 519 static struct pxamci_platform_data cmx270_mci_platform_data = {
 520         .ocr_mask       = MMC_VDD_32_33|MMC_VDD_33_34,
 521         .init           = cmx270_mci_init,
 522         .setpower       = cmx270_mci_setpower,
 523         .exit           = cmx270_mci_exit,
 524 };
 525
 526 #ifdef CONFIG_PM
 527 static unsigned long sleep_save_msc[10];
 528
 529 static int cmx270_suspend(struct sys_device *dev, pm_message_t state)
 530 {
 531         cmx270_pci_suspend();
 532
 533         /* save MSC registers */
 534         sleep_save_msc[0] = MSC0;
 535         sleep_save_msc[1] = MSC1;
 536         sleep_save_msc[2] = MSC2;
 537
 538         /* setup power saving mode registers */
 539         PCFR = 0x0;
 540         PSLR = 0xff400000;
 541         PMCR  = 0x00000005;
 542         PWER  = 0x80000000;
 543         PFER  = 0x00000000;
 544         PRER  = 0x00000000;
 545         PGSR0 = 0xC0018800;
 546         PGSR1 = 0x004F0002;
 547         PGSR2 = 0x6021C000;
 548         PGSR3 = 0x00020000;
 549
 550         return 0;
 551 }
 552
 553 static int cmx270_resume(struct sys_device *dev)
 554 {
 555         cmx270_pci_resume();
 556
 557         /* restore MSC registers */
 558         MSC0 = sleep_save_msc[0];
 559         MSC1 = sleep_save_msc[1];
 560         MSC2 = sleep_save_msc[2];
 561
 562         return 0;
 563 }
 564
 565 static struct sysdev_class cmx270_pm_sysclass = {
 566         .name = "pm",
 567         .resume = cmx270_resume,
 568         .suspend = cmx270_suspend,
 569 };
 570
 571 static struct sys_device cmx270_pm_device = {
 572         .cls = &cmx270_pm_sysclass,
 573 };
 574
 575 static int __init cmx270_pm_init(void)
 576 {
 577         int error;
 578         error = sysdev_class_register(&cmx270_pm_sysclass);
 579         if (error == 0)
 580                 error = sysdev_register(&cmx270_pm_device);
 581         return error;
 582 }
 583 #else
 584 static int __init cmx270_pm_init(void) { return 0; }
 585 #endif
 586
 587 static void __init cmx270_init(void)
 588 {
 589         cmx270_pm_init();
 590
 591         set_pxa_fb_info(cmx270_display);
 592
 593         /* register CM-X270 platform devices */
 594         platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 595
 596         /* set MCI and OHCI platform parameters */
 597         pxa_set_mci_info(&cmx270_mci_platform_data);
 598         pxa_set_ohci_info(&cmx270_ohci_platform_data);
 599
 600         /* This enables the STUART */
 601         pxa_gpio_mode(GPIO46_STRXD_MD);
 602         pxa_gpio_mode(GPIO47_STTXD_MD);
 603
 604         /* This enables the BTUART  */
 605         pxa_gpio_mode(GPIO42_BTRXD_MD);
 606         pxa_gpio_mode(GPIO43_BTTXD_MD);
 607         pxa_gpio_mode(GPIO44_BTCTS_MD);
 608         pxa_gpio_mode(GPIO45_BTRTS_MD);
 609 }
 610
 611 static void __init cmx270_init_irq(void)
 612 {
 613         pxa27x_init_irq();
 614
 615
 616         cmx270_pci_init_irq();
 617
 618         /* Setup interrupt for dm9000 */
 619         pxa_gpio_mode(IRQ_TO_GPIO(CMX270_ETHIRQ));
 620         set_irq_type(CMX270_ETHIRQ, IRQT_RISING);
 621
 622         /* Setup interrupt for 2700G */
 623         pxa_gpio_mode(IRQ_TO_GPIO(CMX270_GFXIRQ));
 624         set_irq_type(CMX270_GFXIRQ, IRQT_FALLING);
 625 }
 626
 627 static void __init cmx270_map_io(void)
 628 {
 629         pxa_map_io();
 630         iotable_init(cmx270_io_desc, ARRAY_SIZE(cmx270_io_desc));
 631 }
 632
 633
 634 MACHINE_START(ARMCORE, "Compulab CM-x270")
 635         .boot_params    = 0xa0000100,
 636         .phys_io        = 0x40000000,
 637         .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
 638         .map_io         = cmx270_map_io,
 639         .init_irq       = cmx270_init_irq,
 640         .timer          = &pxa_timer,
 641         .init_machine   = cmx270_init,
 642 MACHINE_END