x86: cpa self-test, WARN_ON()

[wrt350n-kernel.git] / arch / powerpc / sysdev / dart_iommu.c

/*
 * arch/powerpc/sysdev/dart_iommu.c
 *
 * Copyright (C) 2004 Olof Johansson <olof@lixom.net>, IBM Corporation
 * Copyright (C) 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org>,
 *                    IBM Corporation
 *
 * Based on pSeries_iommu.c:
 * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation
 * Copyright (C) 2004 Olof Johansson <olof@lixom.net>, IBM Corporation
 *
 * Dynamic DMA mapping support, Apple U3, U4 & IBM CPC925 "DART" iommu.
 *
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
 */

#include <linux/init.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/spinlock.h>
#include <linux/string.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <linux/vmalloc.h>
#include <linux/suspend.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/iommu.h>
#include <asm/pci-bridge.h>
#include <asm/machdep.h>
#include <asm/abs_addr.h>
#include <asm/cacheflush.h>
#include <asm/lmb.h>
#include <asm/ppc-pci.h>

#include "dart.h"

/* Physical base address and size of the DART table */
unsigned long dart_tablebase; /* exported to htab_initialize */
static unsigned long dart_tablesize;

/* Virtual base address of the DART table */
static u32 *dart_vbase;
#ifdef CONFIG_PM
static u32 *dart_copy;
#endif

/* Mapped base address for the dart */
static unsigned int __iomem *dart;

/* Dummy val that entries are set to when unused */
static unsigned int dart_emptyval;

static struct iommu_table iommu_table_dart;
static int iommu_table_dart_inited;
static int dart_dirty;
static int dart_is_u4;

#define DBG(...)

static inline void dart_tlb_invalidate_all(void)
{
        unsigned long l = 0;
        unsigned int reg, inv_bit;
        unsigned long limit;

        DBG("dart: flush\n");

        /* To invalidate the DART, set the DARTCNTL_FLUSHTLB bit in the
         * control register and wait for it to clear.
         *
         * Gotcha: Sometimes, the DART won't detect that the bit gets
         * set. If so, clear it and set it again.
         */

        limit = 0;

        inv_bit = dart_is_u4 ? DART_CNTL_U4_FLUSHTLB : DART_CNTL_U3_FLUSHTLB;
retry:
        l = 0;
        reg = DART_IN(DART_CNTL);
        reg |= inv_bit;
        DART_OUT(DART_CNTL, reg);

        while ((DART_IN(DART_CNTL) & inv_bit) && l < (1L << limit))
                l++;
        if (l == (1L << limit)) {
                if (limit < 4) {
                        limit++;
                        reg = DART_IN(DART_CNTL);
                        reg &= ~inv_bit;
                        DART_OUT(DART_CNTL, reg);
                        goto retry;
                } else
                        panic("DART: TLB did not flush after waiting a long "
                              "time. Buggy U3 ?");
        }
}

static inline void dart_tlb_invalidate_one(unsigned long bus_rpn)
{
        unsigned int reg;
        unsigned int l, limit;

        reg = DART_CNTL_U4_ENABLE | DART_CNTL_U4_IONE |
                (bus_rpn & DART_CNTL_U4_IONE_MASK);
        DART_OUT(DART_CNTL, reg);

        limit = 0;
wait_more:
        l = 0;
        while ((DART_IN(DART_CNTL) & DART_CNTL_U4_IONE) && l < (1L << limit)) {
                rmb();
                l++;
        }

        if (l == (1L << limit)) {
                if (limit < 4) {
                        limit++;
                        goto wait_more;
                } else
                        panic("DART: TLB did not flush after waiting a long "
                              "time. Buggy U4 ?");
        }
}

static void dart_flush(struct iommu_table *tbl)
{
        mb();
        if (dart_dirty) {
                dart_tlb_invalidate_all();
                dart_dirty = 0;
        }
}

static void dart_build(struct iommu_table *tbl, long index,
                       long npages, unsigned long uaddr,
                       enum dma_data_direction direction)
{
        unsigned int *dp;
        unsigned int rpn;
        long l;

        DBG("dart: build at: %lx, %lx, addr: %x\n", index, npages, uaddr);

        dp = ((unsigned int*)tbl->it_base) + index;

        /* On U3, all memory is contigous, so we can move this
         * out of the loop.
         */
        l = npages;
        while (l--) {
                rpn = virt_to_abs(uaddr) >> DART_PAGE_SHIFT;

                *(dp++) = DARTMAP_VALID | (rpn & DARTMAP_RPNMASK);

                uaddr += DART_PAGE_SIZE;
        }

        /* make sure all updates have reached memory */
        mb();
        in_be32((unsigned __iomem *)dp);
        mb();

        if (dart_is_u4) {
                rpn = index;
                while (npages--)
                        dart_tlb_invalidate_one(rpn++);
        } else {
                dart_dirty = 1;
        }
}


static void dart_free(struct iommu_table *tbl, long index, long npages)
{
        unsigned int *dp;

        /* We don't worry about flushing the TLB cache. The only drawback of
         * not doing it is that we won't catch buggy device drivers doing
         * bad DMAs, but then no 32-bit architecture ever does either.
         */

        DBG("dart: free at: %lx, %lx\n", index, npages);

        dp  = ((unsigned int *)tbl->it_base) + index;

        while (npages--)
                *(dp++) = dart_emptyval;
}


static int __init dart_init(struct device_node *dart_node)
{
        unsigned int i;
        unsigned long tmp, base, size;
        struct resource r;

        if (dart_tablebase == 0 || dart_tablesize == 0) {
                printk(KERN_INFO "DART: table not allocated, using "
                       "direct DMA\n");
                return -ENODEV;
        }

        if (of_address_to_resource(dart_node, 0, &r))
                panic("DART: can't get register base ! ");

        /* Make sure nothing from the DART range remains in the CPU cache
         * from a previous mapping that existed before the kernel took
         * over
         */
        flush_dcache_phys_range(dart_tablebase,
                                dart_tablebase + dart_tablesize);

        /* Allocate a spare page to map all invalid DART pages. We need to do
         * that to work around what looks like a problem with the HT bridge
         * prefetching into invalid pages and corrupting data
         */
        tmp = lmb_alloc(DART_PAGE_SIZE, DART_PAGE_SIZE);
        dart_emptyval = DARTMAP_VALID | ((tmp >> DART_PAGE_SHIFT) &
                                         DARTMAP_RPNMASK);

        /* Map in DART registers */
        dart = ioremap(r.start, r.end - r.start + 1);
        if (dart == NULL)
                panic("DART: Cannot map registers!");

        /* Map in DART table */
        dart_vbase = ioremap(virt_to_abs(dart_tablebase), dart_tablesize);

        /* Fill initial table */
        for (i = 0; i < dart_tablesize/4; i++)
                dart_vbase[i] = dart_emptyval;

        /* Initialize DART with table base and enable it. */
        base = dart_tablebase >> DART_PAGE_SHIFT;
        size = dart_tablesize >> DART_PAGE_SHIFT;
        if (dart_is_u4) {
                size &= DART_SIZE_U4_SIZE_MASK;
                DART_OUT(DART_BASE_U4, base);
                DART_OUT(DART_SIZE_U4, size);
                DART_OUT(DART_CNTL, DART_CNTL_U4_ENABLE);
        } else {
                size &= DART_CNTL_U3_SIZE_MASK;
                DART_OUT(DART_CNTL,
                         DART_CNTL_U3_ENABLE |
                         (base << DART_CNTL_U3_BASE_SHIFT) |
                         (size << DART_CNTL_U3_SIZE_SHIFT));
        }

        /* Invalidate DART to get rid of possible stale TLBs */
        dart_tlb_invalidate_all();

        printk(KERN_INFO "DART IOMMU initialized for %s type chipset\n",
               dart_is_u4 ? "U4" : "U3");

        return 0;
}

static void iommu_table_dart_setup(void)
{
        iommu_table_dart.it_busno = 0;
        iommu_table_dart.it_offset = 0;
        /* it_size is in number of entries */
        iommu_table_dart.it_size = dart_tablesize / sizeof(u32);

        /* Initialize the common IOMMU code */
        iommu_table_dart.it_base = (unsigned long)dart_vbase;
        iommu_table_dart.it_index = 0;
        iommu_table_dart.it_blocksize = 1;
        iommu_init_table(&iommu_table_dart, -1);

        /* Reserve the last page of the DART to avoid possible prefetch
         * past the DART mapped area
         */
        set_bit(iommu_table_dart.it_size - 1, iommu_table_dart.it_map);
}

static void pci_dma_dev_setup_dart(struct pci_dev *dev)
{
        /* We only have one iommu table on the mac for now, which makes
         * things simple. Setup all PCI devices to point to this table
         */
        dev->dev.archdata.dma_data = &iommu_table_dart;
}

static void pci_dma_bus_setup_dart(struct pci_bus *bus)
{
        struct device_node *dn;

        if (!iommu_table_dart_inited) {
                iommu_table_dart_inited = 1;
                iommu_table_dart_setup();
        }

        dn = pci_bus_to_OF_node(bus);

        if (dn)
                PCI_DN(dn)->iommu_table = &iommu_table_dart;
}

void __init iommu_init_early_dart(void)
{
        struct device_node *dn;

        /* Find the DART in the device-tree */
        dn = of_find_compatible_node(NULL, "dart", "u3-dart");
        if (dn == NULL) {
                dn = of_find_compatible_node(NULL, "dart", "u4-dart");
                if (dn == NULL)
                        goto bail;
                dart_is_u4 = 1;
        }

        /* Setup low level TCE operations for the core IOMMU code */
        ppc_md.tce_build = dart_build;
        ppc_md.tce_free  = dart_free;
        ppc_md.tce_flush = dart_flush;

        /* Initialize the DART HW */
        if (dart_init(dn) == 0) {
                ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_dart;
                ppc_md.pci_dma_bus_setup = pci_dma_bus_setup_dart;

                /* Setup pci_dma ops */
                set_pci_dma_ops(&dma_iommu_ops);
                return;
        }

 bail:
        /* If init failed, use direct iommu and null setup functions */
        ppc_md.pci_dma_dev_setup = NULL;
        ppc_md.pci_dma_bus_setup = NULL;

        /* Setup pci_dma ops */
        set_pci_dma_ops(&dma_direct_ops);
}

#ifdef CONFIG_PM
static void iommu_dart_save(void)
{
        memcpy(dart_copy, dart_vbase, 2*1024*1024);
}

static void iommu_dart_restore(void)
{
        memcpy(dart_vbase, dart_copy, 2*1024*1024);
        dart_tlb_invalidate_all();
}

static int __init iommu_init_late_dart(void)
{
        unsigned long tbasepfn;
        struct page *p;

        /* if no dart table exists then we won't need to save it
         * and the area has also not been reserved */
        if (!dart_tablebase)
                return 0;

        tbasepfn = __pa(dart_tablebase) >> PAGE_SHIFT;
        register_nosave_region_late(tbasepfn,
                                    tbasepfn + ((1<<24) >> PAGE_SHIFT));

        /* For suspend we need to copy the dart contents because
         * it is not part of the regular mapping (see above) and
         * thus not saved automatically. The memory for this copy
         * must be allocated early because we need 2 MB. */
        p = alloc_pages(GFP_KERNEL, 21 - PAGE_SHIFT);
        BUG_ON(!p);
        dart_copy = page_address(p);

        ppc_md.iommu_save = iommu_dart_save;
        ppc_md.iommu_restore = iommu_dart_restore;

        return 0;
}

late_initcall(iommu_init_late_dart);
#endif

void __init alloc_dart_table(void)
{
        /* Only reserve DART space if machine has more than 1GB of RAM
         * or if requested with iommu=on on cmdline.
         *
         * 1GB of RAM is picked as limit because some default devices
         * (i.e. Airport Extreme) have 30 bit address range limits.
         */

        if (iommu_is_off)
                return;

        if (!iommu_force_on && lmb_end_of_DRAM() <= 0x40000000ull)
                return;

        /* 512 pages (2MB) is max DART tablesize. */
        dart_tablesize = 1UL << 21;
        /* 16MB (1 << 24) alignment. We allocate a full 16Mb chuck since we
         * will blow up an entire large page anyway in the kernel mapping
         */
        dart_tablebase = (unsigned long)
                abs_to_virt(lmb_alloc_base(1UL<<24, 1UL<<24, 0x80000000L));

        printk(KERN_INFO "DART table allocated at: %lx\n", dart_tablebase);
}