[XFS] Remove xfs_physmem
[wrt350n-kernel.git] / include / asm-mips / dec / kn02.h
blob93430b5f4724167f7a84209f9a8957c9cdbc64d7
1 /*
2 * Hardware info about DECstation 5000/200 systems (otherwise known as
3 * 3max or KN02).
5 * This file is subject to the terms and conditions of the GNU General Public
6 * License. See the file "COPYING" in the main directory of this archive
7 * for more details.
9 * Copyright (C) 1995,1996 by Paul M. Antoine, some code and definitions
10 * are by courtesy of Chris Fraser.
11 * Copyright (C) 2002, 2003, 2005 Maciej W. Rozycki
13 #ifndef __ASM_MIPS_DEC_KN02_H
14 #define __ASM_MIPS_DEC_KN02_H
16 #define KN02_SLOT_BASE 0x1fc00000
17 #define KN02_SLOT_SIZE 0x00080000
20 * Address ranges decoded by the "system slot" logic for onboard devices.
22 #define KN02_SYS_ROM (0*KN02_SLOT_SIZE) /* system board ROM */
23 #define KN02_RES_1 (1*KN02_SLOT_SIZE) /* unused */
24 #define KN02_CHKSYN (2*KN02_SLOT_SIZE) /* ECC syndrome */
25 #define KN02_ERRADDR (3*KN02_SLOT_SIZE) /* bus error address */
26 #define KN02_DZ11 (4*KN02_SLOT_SIZE) /* DZ11 (DC7085) serial */
27 #define KN02_RTC (5*KN02_SLOT_SIZE) /* DS1287 RTC */
28 #define KN02_CSR (6*KN02_SLOT_SIZE) /* system ctrl & status reg */
29 #define KN02_SYS_ROM_7 (7*KN02_SLOT_SIZE) /* system board ROM (alias) */
33 * System Control & Status Register bits.
35 #define KN02_CSR_RES_28 (0xf<<28) /* unused */
36 #define KN02_CSR_PSU (1<<27) /* power supply unit warning */
37 #define KN02_CSR_NVRAM (1<<26) /* ~NVRAM clear jumper */
38 #define KN02_CSR_REFEVEN (1<<25) /* mem refresh bank toggle */
39 #define KN02_CSR_NRMOD (1<<24) /* ~NRMOD manufact. jumper */
40 #define KN02_CSR_IOINTEN (0xff<<16) /* IRQ mask bits */
41 #define KN02_CSR_DIAGCHK (1<<15) /* diagn/norml ECC reads */
42 #define KN02_CSR_DIAGGEN (1<<14) /* diagn/norml ECC writes */
43 #define KN02_CSR_CORRECT (1<<13) /* ECC correct/check */
44 #define KN02_CSR_LEDIAG (1<<12) /* ECC diagn. latch strobe */
45 #define KN02_CSR_TXDIS (1<<11) /* DZ11 transmit disable */
46 #define KN02_CSR_BNK32M (1<<10) /* 32M/8M stride */
47 #define KN02_CSR_DIAGDN (1<<9) /* DIAGDN manufact. jumper */
48 #define KN02_CSR_BAUD38 (1<<8) /* DZ11 38/19kbps ext. rate */
49 #define KN02_CSR_IOINT (0xff<<0) /* IRQ status bits (r/o) */
50 #define KN02_CSR_LEDS (0xff<<0) /* ~diagnostic LEDs (w/o) */
54 * CPU interrupt bits.
56 #define KN02_CPU_INR_RES_6 6 /* unused */
57 #define KN02_CPU_INR_BUS 5 /* memory, I/O bus read/write errors */
58 #define KN02_CPU_INR_RES_4 4 /* unused */
59 #define KN02_CPU_INR_RTC 3 /* DS1287 RTC */
60 #define KN02_CPU_INR_CASCADE 2 /* CSR cascade */
63 * CSR interrupt bits.
65 #define KN02_CSR_INR_DZ11 7 /* DZ11 (DC7085) serial */
66 #define KN02_CSR_INR_LANCE 6 /* LANCE (Am7990) Ethernet */
67 #define KN02_CSR_INR_ASC 5 /* ASC (NCR53C94) SCSI */
68 #define KN02_CSR_INR_RES_4 4 /* unused */
69 #define KN02_CSR_INR_RES_3 3 /* unused */
70 #define KN02_CSR_INR_TC2 2 /* TURBOchannel slot #2 */
71 #define KN02_CSR_INR_TC1 1 /* TURBOchannel slot #1 */
72 #define KN02_CSR_INR_TC0 0 /* TURBOchannel slot #0 */
75 #define KN02_IRQ_BASE 8 /* first IRQ assigned to CSR */
76 #define KN02_IRQ_LINES 8 /* number of CSR interrupts */
78 #define KN02_IRQ_NR(n) ((n) + KN02_IRQ_BASE)
79 #define KN02_IRQ_MASK(n) (1 << (n))
80 #define KN02_IRQ_ALL 0xff
83 #ifndef __ASSEMBLY__
85 #include <linux/types.h>
87 extern u32 cached_kn02_csr;
88 extern void init_kn02_irqs(int base);
89 #endif
91 #endif /* __ASM_MIPS_DEC_KN02_H */