?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Blackfin arch: Add label to call new GPIO API
[wrt350n-kernel.git] / drivers / scsi / pcmcia / nsp_cs.c
blob445cfbbca9b3c9faa1a85dab07d01d5b1a10f0dd
1 /*======================================================================
2
3 NinjaSCSI-3 / NinjaSCSI-32Bi PCMCIA SCSI host adapter card driver
4 By: YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp>
5
6 Ver.2.8 Support 32bit MMIO mode
7 Support Synchronous Data Transfer Request (SDTR) mode
8 Ver.2.0 Support 32bit PIO mode
9 Ver.1.1.2 Fix for scatter list buffer exceeds
10 Ver.1.1 Support scatter list
11 Ver.0.1 Initial version
12
13 This software may be used and distributed according to the terms of
14 the GNU General Public License.
15
16 ======================================================================*/
17
18 /***********************************************************************
19 This driver is for these PCcards.
20
21 I-O DATA PCSC-F (Workbit NinjaSCSI-3)
22 "WBT", "NinjaSCSI-3", "R1.0"
23 I-O DATA CBSC-II (Workbit NinjaSCSI-32Bi in 16bit mode)
24 "IO DATA", "CBSC16 ", "1"
25
26 ***********************************************************************/
27
28 /* $Id: nsp_cs.c,v 1.23 2003/08/18 11:09:19 elca Exp $ */
29
30 #include <linux/version.h>
31 #include <linux/module.h>
32 #include <linux/kernel.h>
33 #include <linux/init.h>
34 #include <linux/slab.h>
35 #include <linux/string.h>
36 #include <linux/timer.h>
37 #include <linux/ioport.h>
38 #include <linux/delay.h>
39 #include <linux/interrupt.h>
40 #include <linux/major.h>
41 #include <linux/blkdev.h>
42 #include <linux/stat.h>
43
44 #include <asm/io.h>
45 #include <asm/irq.h>
46
47 #include <../drivers/scsi/scsi.h>
48 #include <scsi/scsi_host.h>
49
50 #include <scsi/scsi.h>
51 #include <scsi/scsi_ioctl.h>
52
53 #include <pcmcia/cs_types.h>
54 #include <pcmcia/cs.h>
55 #include <pcmcia/cistpl.h>
56 #include <pcmcia/cisreg.h>
57 #include <pcmcia/ds.h>
58
59 #include "nsp_cs.h"
60
61 MODULE_AUTHOR("YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp>");
62 MODULE_DESCRIPTION("WorkBit NinjaSCSI-3 / NinjaSCSI-32Bi(16bit) PCMCIA SCSI host adapter module $Revision: 1.23 $");
63 MODULE_SUPPORTED_DEVICE("sd,sr,sg,st");
64 #ifdef MODULE_LICENSE
65 MODULE_LICENSE("GPL");
66 #endif
67
68 #include "nsp_io.h"
69
70 /*====================================================================*/
71 /* Parameters that can be set with 'insmod' */
72
73 static int nsp_burst_mode = BURST_MEM32;
74 module_param(nsp_burst_mode, int, 0);
75 MODULE_PARM_DESC(nsp_burst_mode, "Burst transfer mode (0=io8, 1=io32, 2=mem32(default))");
76
77 /* Release IO ports after configuration? */
78 static int free_ports = 0;
79 module_param(free_ports, bool, 0);
80 MODULE_PARM_DESC(free_ports, "Release IO ports after configuration? (default: 0 (=no))");
81
82 static struct scsi_host_template nsp_driver_template = {
83 .proc_name = "nsp_cs",
84 .proc_info = nsp_proc_info,
85 .name = "WorkBit NinjaSCSI-3/32Bi(16bit)",
86 #if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
87 .detect = nsp_detect_old,
88 .release = nsp_release_old,
89 #endif
90 .info = nsp_info,
91 .queuecommand = nsp_queuecommand,
92 /* .eh_abort_handler = nsp_eh_abort,*/
93 .eh_bus_reset_handler = nsp_eh_bus_reset,
94 .eh_host_reset_handler = nsp_eh_host_reset,
95 .can_queue = 1,
96 .this_id = NSP_INITIATOR_ID,
97 .sg_tablesize = SG_ALL,
98 .cmd_per_lun = 1,
99 .use_clustering = DISABLE_CLUSTERING,
100 #if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,2))
101 .use_new_eh_code = 1,
102 #endif
103 };
104
105 static nsp_hw_data nsp_data_base; /* attach <-> detect glue */
106
107
108
109 /*
110 * debug, error print
111 */
112 #ifndef NSP_DEBUG
113 # define NSP_DEBUG_MASK 0x000000
114 # define nsp_msg(type, args...) nsp_cs_message("", 0, (type), args)
115 # define nsp_dbg(mask, args...) /* */
116 #else
117 # define NSP_DEBUG_MASK 0xffffff
118 # define nsp_msg(type, args...) \
119 nsp_cs_message (__FUNCTION__, __LINE__, (type), args)
120 # define nsp_dbg(mask, args...) \
121 nsp_cs_dmessage(__FUNCTION__, __LINE__, (mask), args)
122 #endif
123
124 #define NSP_DEBUG_QUEUECOMMAND BIT(0)
125 #define NSP_DEBUG_REGISTER BIT(1)
126 #define NSP_DEBUG_AUTOSCSI BIT(2)
127 #define NSP_DEBUG_INTR BIT(3)
128 #define NSP_DEBUG_SGLIST BIT(4)
129 #define NSP_DEBUG_BUSFREE BIT(5)
130 #define NSP_DEBUG_CDB_CONTENTS BIT(6)
131 #define NSP_DEBUG_RESELECTION BIT(7)
132 #define NSP_DEBUG_MSGINOCCUR BIT(8)
133 #define NSP_DEBUG_EEPROM BIT(9)
134 #define NSP_DEBUG_MSGOUTOCCUR BIT(10)
135 #define NSP_DEBUG_BUSRESET BIT(11)
136 #define NSP_DEBUG_RESTART BIT(12)
137 #define NSP_DEBUG_SYNC BIT(13)
138 #define NSP_DEBUG_WAIT BIT(14)
139 #define NSP_DEBUG_TARGETFLAG BIT(15)
140 #define NSP_DEBUG_PROC BIT(16)
141 #define NSP_DEBUG_INIT BIT(17)
142 #define NSP_DEBUG_DATA_IO BIT(18)
143 #define NSP_SPECIAL_PRINT_REGISTER BIT(20)
144
145 #define NSP_DEBUG_BUF_LEN 150
146
147 static void nsp_cs_message(const char *func, int line, char *type, char *fmt, ...)
148 {
149 va_list args;
150 char buf[NSP_DEBUG_BUF_LEN];
151
152 va_start(args, fmt);
153 vsnprintf(buf, sizeof(buf), fmt, args);
154 va_end(args);
155
156 #ifndef NSP_DEBUG
157 printk("%snsp_cs: %s\n", type, buf);
158 #else
159 printk("%snsp_cs: %s (%d): %s\n", type, func, line, buf);
160 #endif
161 }
162
163 #ifdef NSP_DEBUG
164 static void nsp_cs_dmessage(const char *func, int line, int mask, char *fmt, ...)
165 {
166 va_list args;
167 char buf[NSP_DEBUG_BUF_LEN];
168
169 va_start(args, fmt);
170 vsnprintf(buf, sizeof(buf), fmt, args);
171 va_end(args);
172
173 if (mask & NSP_DEBUG_MASK) {
174 printk("nsp_cs-debug: 0x%x %s (%d): %s\n", mask, func, line, buf);
175 }
176 }
177 #endif
178
179 /***********************************************************/
180
181 /*====================================================
182 * Clenaup parameters and call done() functions.
183 * You must be set SCpnt->result before call this function.
184 */
185 static void nsp_scsi_done(struct scsi_cmnd *SCpnt)
186 {
187 nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata;
188
189 data->CurrentSC = NULL;
190
191 SCpnt->scsi_done(SCpnt);
192 }
193
194 static int nsp_queuecommand(struct scsi_cmnd *SCpnt,
195 void (*done)(struct scsi_cmnd *))
196 {
197 #ifdef NSP_DEBUG
198 /*unsigned int host_id = SCpnt->device->host->this_id;*/
199 /*unsigned int base = SCpnt->device->host->io_port;*/
200 unsigned char target = scmd_id(SCpnt);
201 #endif
202 nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata;
203
204 nsp_dbg(NSP_DEBUG_QUEUECOMMAND, "SCpnt=0x%p target=%d lun=%d buff=0x%p bufflen=%d use_sg=%d",
205 SCpnt, target, SCpnt->device->lun, SCpnt->request_buffer, SCpnt->request_bufflen, SCpnt->use_sg);
206 //nsp_dbg(NSP_DEBUG_QUEUECOMMAND, "before CurrentSC=0x%p", data->CurrentSC);
207
208 SCpnt->scsi_done = done;
209
210 if (data->CurrentSC != NULL) {
211 nsp_msg(KERN_DEBUG, "CurrentSC!=NULL this can't be happen");
212 SCpnt->result = DID_BAD_TARGET << 16;
213 nsp_scsi_done(SCpnt);
214 return 0;
215 }
216
217 #if 0
218 /* XXX: pcmcia-cs generates SCSI command with "scsi_info" utility.
219 This makes kernel crash when suspending... */
220 if (data->ScsiInfo->stop != 0) {
221 nsp_msg(KERN_INFO, "suspending device. reject command.");
222 SCpnt->result = DID_BAD_TARGET << 16;
223 nsp_scsi_done(SCpnt);
224 return SCSI_MLQUEUE_HOST_BUSY;
225 }
226 #endif
227
228 show_command(SCpnt);
229
230 data->CurrentSC = SCpnt;
231
232 SCpnt->SCp.Status = CHECK_CONDITION;
233 SCpnt->SCp.Message = 0;
234 SCpnt->SCp.have_data_in = IO_UNKNOWN;
235 SCpnt->SCp.sent_command = 0;
236 SCpnt->SCp.phase = PH_UNDETERMINED;
237 SCpnt->resid = SCpnt->request_bufflen;
238
239 /* setup scratch area
240 SCp.ptr : buffer pointer
241 SCp.this_residual : buffer length
242 SCp.buffer : next buffer
243 SCp.buffers_residual : left buffers in list
244 SCp.phase : current state of the command */
245 if (SCpnt->use_sg) {
246 SCpnt->SCp.buffer = (struct scatterlist *) SCpnt->request_buffer;
247 SCpnt->SCp.ptr = BUFFER_ADDR;
248 SCpnt->SCp.this_residual = SCpnt->SCp.buffer->length;
249 SCpnt->SCp.buffers_residual = SCpnt->use_sg - 1;
250 } else {
251 SCpnt->SCp.ptr = (char *) SCpnt->request_buffer;
252 SCpnt->SCp.this_residual = SCpnt->request_bufflen;
253 SCpnt->SCp.buffer = NULL;
254 SCpnt->SCp.buffers_residual = 0;
255 }
256
257 if (nsphw_start_selection(SCpnt) == FALSE) {
258 nsp_dbg(NSP_DEBUG_QUEUECOMMAND, "selection fail");
259 SCpnt->result = DID_BUS_BUSY << 16;
260 nsp_scsi_done(SCpnt);
261 return 0;
262 }
263
264
265 //nsp_dbg(NSP_DEBUG_QUEUECOMMAND, "out");
266 #ifdef NSP_DEBUG
267 data->CmdId++;
268 #endif
269 return 0;
270 }
271
272 /*
273 * setup PIO FIFO transfer mode and enable/disable to data out
274 */
275 static void nsp_setup_fifo(nsp_hw_data *data, int enabled)
276 {
277 unsigned int base = data->BaseAddress;
278 unsigned char transfer_mode_reg;
279
280 //nsp_dbg(NSP_DEBUG_DATA_IO, "enabled=%d", enabled);
281
282 if (enabled != FALSE) {
283 transfer_mode_reg = TRANSFER_GO | BRAIND;
284 } else {
285 transfer_mode_reg = 0;
286 }
287
288 transfer_mode_reg |= data->TransferMode;
289
290 nsp_index_write(base, TRANSFERMODE, transfer_mode_reg);
291 }
292
293 static void nsphw_init_sync(nsp_hw_data *data)
294 {
295 sync_data tmp_sync = { .SyncNegotiation = SYNC_NOT_YET,
296 .SyncPeriod = 0,
297 .SyncOffset = 0
298 };
299 int i;
300
301 /* setup sync data */
302 for ( i = 0; i < ARRAY_SIZE(data->Sync); i++ ) {
303 data->Sync[i] = tmp_sync;
304 }
305 }
306
307 /*
308 * Initialize Ninja hardware
309 */
310 static int nsphw_init(nsp_hw_data *data)
311 {
312 unsigned int base = data->BaseAddress;
313
314 nsp_dbg(NSP_DEBUG_INIT, "in base=0x%x", base);
315
316 data->ScsiClockDiv = CLOCK_40M | FAST_20;
317 data->CurrentSC = NULL;
318 data->FifoCount = 0;
319 data->TransferMode = MODE_IO8;
320
321 nsphw_init_sync(data);
322
323 /* block all interrupts */
324 nsp_write(base, IRQCONTROL, IRQCONTROL_ALLMASK);
325
326 /* setup SCSI interface */
327 nsp_write(base, IFSELECT, IF_IFSEL);
328
329 nsp_index_write(base, SCSIIRQMODE, 0);
330
331 nsp_index_write(base, TRANSFERMODE, MODE_IO8);
332 nsp_index_write(base, CLOCKDIV, data->ScsiClockDiv);
333
334 nsp_index_write(base, PARITYCTRL, 0);
335 nsp_index_write(base, POINTERCLR, POINTER_CLEAR |
336 ACK_COUNTER_CLEAR |
337 REQ_COUNTER_CLEAR |
338 HOST_COUNTER_CLEAR);
339
340 /* setup fifo asic */
341 nsp_write(base, IFSELECT, IF_REGSEL);
342 nsp_index_write(base, TERMPWRCTRL, 0);
343 if ((nsp_index_read(base, OTHERCONTROL) & TPWR_SENSE) == 0) {
344 nsp_msg(KERN_INFO, "terminator power on");
345 nsp_index_write(base, TERMPWRCTRL, POWER_ON);
346 }
347
348 nsp_index_write(base, TIMERCOUNT, 0);
349 nsp_index_write(base, TIMERCOUNT, 0); /* requires 2 times!! */
350
351 nsp_index_write(base, SYNCREG, 0);
352 nsp_index_write(base, ACKWIDTH, 0);
353
354 /* enable interrupts and ack them */
355 nsp_index_write(base, SCSIIRQMODE, SCSI_PHASE_CHANGE_EI |
356 RESELECT_EI |
357 SCSI_RESET_IRQ_EI );
358 nsp_write(base, IRQCONTROL, IRQCONTROL_ALLCLEAR);
359
360 nsp_setup_fifo(data, FALSE);
361
362 return TRUE;
363 }
364
365 /*
366 * Start selection phase
367 */
368 static int nsphw_start_selection(struct scsi_cmnd *SCpnt)
369 {
370 unsigned int host_id = SCpnt->device->host->this_id;
371 unsigned int base = SCpnt->device->host->io_port;
372 unsigned char target = scmd_id(SCpnt);
373 nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata;
374 int time_out;
375 unsigned char phase, arbit;
376
377 //nsp_dbg(NSP_DEBUG_RESELECTION, "in");
378
379 phase = nsp_index_read(base, SCSIBUSMON);
380 if(phase != BUSMON_BUS_FREE) {
381 //nsp_dbg(NSP_DEBUG_RESELECTION, "bus busy");
382 return FALSE;
383 }
384
385 /* start arbitration */
386 //nsp_dbg(NSP_DEBUG_RESELECTION, "start arbit");
387 SCpnt->SCp.phase = PH_ARBSTART;
388 nsp_index_write(base, SETARBIT, ARBIT_GO);
389
390 time_out = 1000;
391 do {
392 /* XXX: what a stupid chip! */
393 arbit = nsp_index_read(base, ARBITSTATUS);
394 //nsp_dbg(NSP_DEBUG_RESELECTION, "arbit=%d, wait_count=%d", arbit, wait_count);
395 udelay(1); /* hold 1.2us */
396 } while((arbit & (ARBIT_WIN | ARBIT_FAIL)) == 0 &&
397 (time_out-- != 0));
398
399 if (!(arbit & ARBIT_WIN)) {
400 //nsp_dbg(NSP_DEBUG_RESELECTION, "arbit fail");
401 nsp_index_write(base, SETARBIT, ARBIT_FLAG_CLEAR);
402 return FALSE;
403 }
404
405 /* assert select line */
406 //nsp_dbg(NSP_DEBUG_RESELECTION, "assert SEL line");
407 SCpnt->SCp.phase = PH_SELSTART;
408 udelay(3); /* wait 2.4us */
409 nsp_index_write(base, SCSIDATALATCH, BIT(host_id) | BIT(target));
410 nsp_index_write(base, SCSIBUSCTRL, SCSI_SEL | SCSI_BSY | SCSI_ATN);
411 udelay(2); /* wait >1.2us */
412 nsp_index_write(base, SCSIBUSCTRL, SCSI_SEL | SCSI_BSY | SCSI_DATAOUT_ENB | SCSI_ATN);
413 nsp_index_write(base, SETARBIT, ARBIT_FLAG_CLEAR);
414 /*udelay(1);*/ /* wait >90ns */
415 nsp_index_write(base, SCSIBUSCTRL, SCSI_SEL | SCSI_DATAOUT_ENB | SCSI_ATN);
416
417 /* check selection timeout */
418 nsp_start_timer(SCpnt, 1000/51);
419 data->SelectionTimeOut = 1;
420
421 return TRUE;
422 }
423
424 struct nsp_sync_table {
425 unsigned int min_period;
426 unsigned int max_period;
427 unsigned int chip_period;
428 unsigned int ack_width;
429 };
430
431 static struct nsp_sync_table nsp_sync_table_40M[] = {
432 {0x0c, 0x0c, 0x1, 0}, /* 20MB 50ns*/
433 {0x19, 0x19, 0x3, 1}, /* 10MB 100ns*/
434 {0x1a, 0x25, 0x5, 2}, /* 7.5MB 150ns*/
435 {0x26, 0x32, 0x7, 3}, /* 5MB 200ns*/
436 { 0, 0, 0, 0},
437 };
438
439 static struct nsp_sync_table nsp_sync_table_20M[] = {
440 {0x19, 0x19, 0x1, 0}, /* 10MB 100ns*/
441 {0x1a, 0x25, 0x2, 0}, /* 7.5MB 150ns*/
442 {0x26, 0x32, 0x3, 1}, /* 5MB 200ns*/
443 { 0, 0, 0, 0},
444 };
445
446 /*
447 * setup synchronous data transfer mode
448 */
449 static int nsp_analyze_sdtr(struct scsi_cmnd *SCpnt)
450 {
451 unsigned char target = scmd_id(SCpnt);
452 // unsigned char lun = SCpnt->device->lun;
453 nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata;
454 sync_data *sync = &(data->Sync[target]);
455 struct nsp_sync_table *sync_table;
456 unsigned int period, offset;
457 int i;
458
459
460 nsp_dbg(NSP_DEBUG_SYNC, "in");
461
462 period = sync->SyncPeriod;
463 offset = sync->SyncOffset;
464
465 nsp_dbg(NSP_DEBUG_SYNC, "period=0x%x, offset=0x%x", period, offset);
466
467 if ((data->ScsiClockDiv & (BIT(0)|BIT(1))) == CLOCK_20M) {
468 sync_table = nsp_sync_table_20M;
469 } else {
470 sync_table = nsp_sync_table_40M;
471 }
472
473 for ( i = 0; sync_table->max_period != 0; i++, sync_table++) {
474 if ( period >= sync_table->min_period &&
475 period <= sync_table->max_period ) {
476 break;
477 }
478 }
479
480 if (period != 0 && sync_table->max_period == 0) {
481 /*
482 * No proper period/offset found
483 */
484 nsp_dbg(NSP_DEBUG_SYNC, "no proper period/offset");
485
486 sync->SyncPeriod = 0;
487 sync->SyncOffset = 0;
488 sync->SyncRegister = 0;
489 sync->AckWidth = 0;
490
491 return FALSE;
492 }
493
494 sync->SyncRegister = (sync_table->chip_period << SYNCREG_PERIOD_SHIFT) |
495 (offset & SYNCREG_OFFSET_MASK);
496 sync->AckWidth = sync_table->ack_width;
497
498 nsp_dbg(NSP_DEBUG_SYNC, "sync_reg=0x%x, ack_width=0x%x", sync->SyncRegister, sync->AckWidth);
499
500 return TRUE;
501 }
502
503
504 /*
505 * start ninja hardware timer
506 */
507 static void nsp_start_timer(struct scsi_cmnd *SCpnt, int time)
508 {
509 unsigned int base = SCpnt->device->host->io_port;
510 nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata;
511
512 //nsp_dbg(NSP_DEBUG_INTR, "in SCpnt=0x%p, time=%d", SCpnt, time);
513 data->TimerCount = time;
514 nsp_index_write(base, TIMERCOUNT, time);
515 }
516
517 /*
518 * wait for bus phase change
519 */
520 static int nsp_negate_signal(struct scsi_cmnd *SCpnt, unsigned char mask,
521 char *str)
522 {
523 unsigned int base = SCpnt->device->host->io_port;
524 unsigned char reg;
525 int time_out;
526
527 //nsp_dbg(NSP_DEBUG_INTR, "in");
528
529 time_out = 100;
530
531 do {
532 reg = nsp_index_read(base, SCSIBUSMON);
533 if (reg == 0xff) {
534 break;
535 }
536 } while ((time_out-- != 0) && (reg & mask) != 0);
537
538 if (time_out == 0) {
539 nsp_msg(KERN_DEBUG, " %s signal off timeut", str);
540 }
541
542 return 0;
543 }
544
545 /*
546 * expect Ninja Irq
547 */
548 static int nsp_expect_signal(struct scsi_cmnd *SCpnt,
549 unsigned char current_phase,
550 unsigned char mask)
551 {
552 unsigned int base = SCpnt->device->host->io_port;
553 int time_out;
554 unsigned char phase, i_src;
555
556 //nsp_dbg(NSP_DEBUG_INTR, "current_phase=0x%x, mask=0x%x", current_phase, mask);
557
558 time_out = 100;
559 do {
560 phase = nsp_index_read(base, SCSIBUSMON);
561 if (phase == 0xff) {
562 //nsp_dbg(NSP_DEBUG_INTR, "ret -1");
563 return -1;
564 }
565 i_src = nsp_read(base, IRQSTATUS);
566 if (i_src & IRQSTATUS_SCSI) {
567 //nsp_dbg(NSP_DEBUG_INTR, "ret 0 found scsi signal");
568 return 0;
569 }
570 if ((phase & mask) != 0 && (phase & BUSMON_PHASE_MASK) == current_phase) {
571 //nsp_dbg(NSP_DEBUG_INTR, "ret 1 phase=0x%x", phase);
572 return 1;
573 }
574 } while(time_out-- != 0);
575
576 //nsp_dbg(NSP_DEBUG_INTR, "timeout");
577 return -1;
578 }
579
580 /*
581 * transfer SCSI message
582 */
583 static int nsp_xfer(struct scsi_cmnd *SCpnt, int phase)
584 {
585 unsigned int base = SCpnt->device->host->io_port;
586 nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata;
587 char *buf = data->MsgBuffer;
588 int len = min(MSGBUF_SIZE, data->MsgLen);
589 int ptr;
590 int ret;
591
592 //nsp_dbg(NSP_DEBUG_DATA_IO, "in");
593 for (ptr = 0; len > 0; len--, ptr++) {
594
595 ret = nsp_expect_signal(SCpnt, phase, BUSMON_REQ);
596 if (ret <= 0) {
597 nsp_dbg(NSP_DEBUG_DATA_IO, "xfer quit");
598 return 0;
599 }
600
601 /* if last byte, negate ATN */
602 if (len == 1 && SCpnt->SCp.phase == PH_MSG_OUT) {
603 nsp_index_write(base, SCSIBUSCTRL, AUTODIRECTION | ACKENB);
604 }
605
606 /* read & write message */
607 if (phase & BUSMON_IO) {
608 nsp_dbg(NSP_DEBUG_DATA_IO, "read msg");
609 buf[ptr] = nsp_index_read(base, SCSIDATAWITHACK);
610 } else {
611 nsp_dbg(NSP_DEBUG_DATA_IO, "write msg");
612 nsp_index_write(base, SCSIDATAWITHACK, buf[ptr]);
613 }
614 nsp_negate_signal(SCpnt, BUSMON_ACK, "xfer<ack>");
615
616 }
617 return len;
618 }
619
620 /*
621 * get extra SCSI data from fifo
622 */
623 static int nsp_dataphase_bypass(struct scsi_cmnd *SCpnt)
624 {
625 nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata;
626 unsigned int count;
627
628 //nsp_dbg(NSP_DEBUG_DATA_IO, "in");
629
630 if (SCpnt->SCp.have_data_in != IO_IN) {
631 return 0;
632 }
633
634 count = nsp_fifo_count(SCpnt);
635 if (data->FifoCount == count) {
636 //nsp_dbg(NSP_DEBUG_DATA_IO, "not use bypass quirk");
637 return 0;
638 }
639
640 /*
641 * XXX: NSP_QUIRK
642 * data phase skip only occures in case of SCSI_LOW_READ
643 */
644 nsp_dbg(NSP_DEBUG_DATA_IO, "use bypass quirk");
645 SCpnt->SCp.phase = PH_DATA;
646 nsp_pio_read(SCpnt);
647 nsp_setup_fifo(data, FALSE);
648
649 return 0;
650 }
651
652 /*
653 * accept reselection
654 */
655 static int nsp_reselected(struct scsi_cmnd *SCpnt)
656 {
657 unsigned int base = SCpnt->device->host->io_port;
658 unsigned int host_id = SCpnt->device->host->this_id;
659 //nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata;
660 unsigned char bus_reg;
661 unsigned char id_reg, tmp;
662 int target;
663
664 nsp_dbg(NSP_DEBUG_RESELECTION, "in");
665
666 id_reg = nsp_index_read(base, RESELECTID);
667 tmp = id_reg & (~BIT(host_id));
668 target = 0;
669 while(tmp != 0) {
670 if (tmp & BIT(0)) {
671 break;
672 }
673 tmp >>= 1;
674 target++;
675 }
676
677 if (scmd_id(SCpnt) != target) {
678 nsp_msg(KERN_ERR, "XXX: reselect ID must be %d in this implementation.", target);
679 }
680
681 nsp_negate_signal(SCpnt, BUSMON_SEL, "reselect<SEL>");
682
683 nsp_nexus(SCpnt);
684 bus_reg = nsp_index_read(base, SCSIBUSCTRL) & ~(SCSI_BSY | SCSI_ATN);
685 nsp_index_write(base, SCSIBUSCTRL, bus_reg);
686 nsp_index_write(base, SCSIBUSCTRL, bus_reg | AUTODIRECTION | ACKENB);
687
688 return TRUE;
689 }
690
691 /*
692 * count how many data transferd
693 */
694 static int nsp_fifo_count(struct scsi_cmnd *SCpnt)
695 {
696 unsigned int base = SCpnt->device->host->io_port;
697 unsigned int count;
698 unsigned int l, m, h, dummy;
699
700 nsp_index_write(base, POINTERCLR, POINTER_CLEAR | ACK_COUNTER);
701
702 l = nsp_index_read(base, TRANSFERCOUNT);
703 m = nsp_index_read(base, TRANSFERCOUNT);
704 h = nsp_index_read(base, TRANSFERCOUNT);
705 dummy = nsp_index_read(base, TRANSFERCOUNT); /* required this! */
706
707 count = (h << 16) | (m << 8) | (l << 0);
708
709 //nsp_dbg(NSP_DEBUG_DATA_IO, "count=0x%x", count);
710
711 return count;
712 }
713
714 /* fifo size */
715 #define RFIFO_CRIT 64
716 #define WFIFO_CRIT 64
717
718 /*
719 * read data in DATA IN phase
720 */
721 static void nsp_pio_read(struct scsi_cmnd *SCpnt)
722 {
723 unsigned int base = SCpnt->device->host->io_port;
724 unsigned long mmio_base = SCpnt->device->host->base;
725 nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata;
726 long time_out;
727 int ocount, res;
728 unsigned char stat, fifo_stat;
729
730 ocount = data->FifoCount;
731
732 nsp_dbg(NSP_DEBUG_DATA_IO, "in SCpnt=0x%p resid=%d ocount=%d ptr=0x%p this_residual=%d buffers=0x%p nbuf=%d",
733 SCpnt, SCpnt->resid, ocount, SCpnt->SCp.ptr, SCpnt->SCp.this_residual, SCpnt->SCp.buffer, SCpnt->SCp.buffers_residual);
734
735 time_out = 1000;
736
737 while ((time_out-- != 0) &&
738 (SCpnt->SCp.this_residual > 0 || SCpnt->SCp.buffers_residual > 0 ) ) {
739
740 stat = nsp_index_read(base, SCSIBUSMON);
741 stat &= BUSMON_PHASE_MASK;
742
743
744 res = nsp_fifo_count(SCpnt) - ocount;
745 //nsp_dbg(NSP_DEBUG_DATA_IO, "ptr=0x%p this=0x%x ocount=0x%x res=0x%x", SCpnt->SCp.ptr, SCpnt->SCp.this_residual, ocount, res);
746 if (res == 0) { /* if some data avilable ? */
747 if (stat == BUSPHASE_DATA_IN) { /* phase changed? */
748 //nsp_dbg(NSP_DEBUG_DATA_IO, " wait for data this=%d", SCpnt->SCp.this_residual);
749 continue;
750 } else {
751 nsp_dbg(NSP_DEBUG_DATA_IO, "phase changed stat=0x%x", stat);
752 break;
753 }
754 }
755
756 fifo_stat = nsp_read(base, FIFOSTATUS);
757 if ((fifo_stat & FIFOSTATUS_FULL_EMPTY) == 0 &&
758 stat == BUSPHASE_DATA_IN) {
759 continue;
760 }
761
762 res = min(res, SCpnt->SCp.this_residual);
763
764 switch (data->TransferMode) {
765 case MODE_IO32:
766 res &= ~(BIT(1)|BIT(0)); /* align 4 */
767 nsp_fifo32_read(base, SCpnt->SCp.ptr, res >> 2);
768 break;
769 case MODE_IO8:
770 nsp_fifo8_read (base, SCpnt->SCp.ptr, res );
771 break;
772
773 case MODE_MEM32:
774 res &= ~(BIT(1)|BIT(0)); /* align 4 */
775 nsp_mmio_fifo32_read(mmio_base, SCpnt->SCp.ptr, res >> 2);
776 break;
777
778 default:
779 nsp_dbg(NSP_DEBUG_DATA_IO, "unknown read mode");
780 return;
781 }
782
783 SCpnt->resid -= res;
784 SCpnt->SCp.ptr += res;
785 SCpnt->SCp.this_residual -= res;
786 ocount += res;
787 //nsp_dbg(NSP_DEBUG_DATA_IO, "ptr=0x%p this_residual=0x%x ocount=0x%x", SCpnt->SCp.ptr, SCpnt->SCp.this_residual, ocount);
788
789 /* go to next scatter list if available */
790 if (SCpnt->SCp.this_residual == 0 &&
791 SCpnt->SCp.buffers_residual != 0 ) {
792 //nsp_dbg(NSP_DEBUG_DATA_IO, "scatterlist next timeout=%d", time_out);
793 SCpnt->SCp.buffers_residual--;
794 SCpnt->SCp.buffer++;
795 SCpnt->SCp.ptr = BUFFER_ADDR;
796 SCpnt->SCp.this_residual = SCpnt->SCp.buffer->length;
797 time_out = 1000;
798
799 //nsp_dbg(NSP_DEBUG_DATA_IO, "page: 0x%p, off: 0x%x", SCpnt->SCp.buffer->page, SCpnt->SCp.buffer->offset);
800 }
801 }
802
803 data->FifoCount = ocount;
804
805 if (time_out == 0) {
806 nsp_msg(KERN_DEBUG, "pio read timeout resid=%d this_residual=%d buffers_residual=%d",
807 SCpnt->resid, SCpnt->SCp.this_residual, SCpnt->SCp.buffers_residual);
808 }
809 nsp_dbg(NSP_DEBUG_DATA_IO, "read ocount=0x%x", ocount);
810 nsp_dbg(NSP_DEBUG_DATA_IO, "r cmd=%d resid=0x%x\n", data->CmdId, SCpnt->resid);
811 }
812
813 /*
814 * write data in DATA OUT phase
815 */
816 static void nsp_pio_write(struct scsi_cmnd *SCpnt)
817 {
818 unsigned int base = SCpnt->device->host->io_port;
819 unsigned long mmio_base = SCpnt->device->host->base;
820 nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata;
821 int time_out;
822 int ocount, res;
823 unsigned char stat;
824
825 ocount = data->FifoCount;
826
827 nsp_dbg(NSP_DEBUG_DATA_IO, "in fifocount=%d ptr=0x%p this_residual=%d buffers=0x%p nbuf=%d resid=0x%x",
828 data->FifoCount, SCpnt->SCp.ptr, SCpnt->SCp.this_residual, SCpnt->SCp.buffer, SCpnt->SCp.buffers_residual, SCpnt->resid);
829
830 time_out = 1000;
831
832 while ((time_out-- != 0) &&
833 (SCpnt->SCp.this_residual > 0 || SCpnt->SCp.buffers_residual > 0)) {
834 stat = nsp_index_read(base, SCSIBUSMON);
835 stat &= BUSMON_PHASE_MASK;
836
837 if (stat != BUSPHASE_DATA_OUT) {
838 res = ocount - nsp_fifo_count(SCpnt);
839
840 nsp_dbg(NSP_DEBUG_DATA_IO, "phase changed stat=0x%x, res=%d\n", stat, res);
841 /* Put back pointer */
842 SCpnt->resid += res;
843 SCpnt->SCp.ptr -= res;
844 SCpnt->SCp.this_residual += res;
845 ocount -= res;
846
847 break;
848 }
849
850 res = ocount - nsp_fifo_count(SCpnt);
851 if (res > 0) { /* write all data? */
852 nsp_dbg(NSP_DEBUG_DATA_IO, "wait for all data out. ocount=0x%x res=%d", ocount, res);
853 continue;
854 }
855
856 res = min(SCpnt->SCp.this_residual, WFIFO_CRIT);
857
858 //nsp_dbg(NSP_DEBUG_DATA_IO, "ptr=0x%p this=0x%x res=0x%x", SCpnt->SCp.ptr, SCpnt->SCp.this_residual, res);
859 switch (data->TransferMode) {
860 case MODE_IO32:
861 res &= ~(BIT(1)|BIT(0)); /* align 4 */
862 nsp_fifo32_write(base, SCpnt->SCp.ptr, res >> 2);
863 break;
864 case MODE_IO8:
865 nsp_fifo8_write (base, SCpnt->SCp.ptr, res );
866 break;
867
868 case MODE_MEM32:
869 res &= ~(BIT(1)|BIT(0)); /* align 4 */
870 nsp_mmio_fifo32_write(mmio_base, SCpnt->SCp.ptr, res >> 2);
871 break;
872
873 default:
874 nsp_dbg(NSP_DEBUG_DATA_IO, "unknown write mode");
875 break;
876 }
877
878 SCpnt->resid -= res;
879 SCpnt->SCp.ptr += res;
880 SCpnt->SCp.this_residual -= res;
881 ocount += res;
882
883 /* go to next scatter list if available */
884 if (SCpnt->SCp.this_residual == 0 &&
885 SCpnt->SCp.buffers_residual != 0 ) {
886 //nsp_dbg(NSP_DEBUG_DATA_IO, "scatterlist next");
887 SCpnt->SCp.buffers_residual--;
888 SCpnt->SCp.buffer++;
889 SCpnt->SCp.ptr = BUFFER_ADDR;
890 SCpnt->SCp.this_residual = SCpnt->SCp.buffer->length;
891 time_out = 1000;
892 }
893 }
894
895 data->FifoCount = ocount;
896
897 if (time_out == 0) {
898 nsp_msg(KERN_DEBUG, "pio write timeout resid=0x%x", SCpnt->resid);
899 }
900 nsp_dbg(NSP_DEBUG_DATA_IO, "write ocount=0x%x", ocount);
901 nsp_dbg(NSP_DEBUG_DATA_IO, "w cmd=%d resid=0x%x\n", data->CmdId, SCpnt->resid);
902 }
903 #undef RFIFO_CRIT
904 #undef WFIFO_CRIT
905
906 /*
907 * setup synchronous/asynchronous data transfer mode
908 */
909 static int nsp_nexus(struct scsi_cmnd *SCpnt)
910 {
911 unsigned int base = SCpnt->device->host->io_port;
912 unsigned char target = scmd_id(SCpnt);
913 // unsigned char lun = SCpnt->device->lun;
914 nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata;
915 sync_data *sync = &(data->Sync[target]);
916
917 //nsp_dbg(NSP_DEBUG_DATA_IO, "in SCpnt=0x%p", SCpnt);
918
919 /* setup synch transfer registers */
920 nsp_index_write(base, SYNCREG, sync->SyncRegister);
921 nsp_index_write(base, ACKWIDTH, sync->AckWidth);
922
923 if (SCpnt->use_sg == 0 ||
924 SCpnt->resid % 4 != 0 ||
925 SCpnt->resid <= PAGE_SIZE ) {
926 data->TransferMode = MODE_IO8;
927 } else if (nsp_burst_mode == BURST_MEM32) {
928 data->TransferMode = MODE_MEM32;
929 } else if (nsp_burst_mode == BURST_IO32) {
930 data->TransferMode = MODE_IO32;
931 } else {
932 data->TransferMode = MODE_IO8;
933 }
934
935 /* setup pdma fifo */
936 nsp_setup_fifo(data, TRUE);
937
938 /* clear ack counter */
939 data->FifoCount = 0;
940 nsp_index_write(base, POINTERCLR, POINTER_CLEAR |
941 ACK_COUNTER_CLEAR |
942 REQ_COUNTER_CLEAR |
943 HOST_COUNTER_CLEAR);
944
945 return 0;
946 }
947
948 #include "nsp_message.c"
949 /*
950 * interrupt handler
951 */
952 static irqreturn_t nspintr(int irq, void *dev_id)
953 {
954 unsigned int base;
955 unsigned char irq_status, irq_phase, phase;
956 struct scsi_cmnd *tmpSC;
957 unsigned char target, lun;
958 unsigned int *sync_neg;
959 int i, tmp;
960 nsp_hw_data *data;
961
962
963 //nsp_dbg(NSP_DEBUG_INTR, "dev_id=0x%p", dev_id);
964 //nsp_dbg(NSP_DEBUG_INTR, "host=0x%p", ((scsi_info_t *)dev_id)->host);
965
966 if ( dev_id != NULL &&
967 ((scsi_info_t *)dev_id)->host != NULL ) {
968 scsi_info_t *info = (scsi_info_t *)dev_id;
969
970 data = (nsp_hw_data *)info->host->hostdata;
971 } else {
972 nsp_dbg(NSP_DEBUG_INTR, "host data wrong");
973 return IRQ_NONE;
974 }
975
976 //nsp_dbg(NSP_DEBUG_INTR, "&nsp_data_base=0x%p, dev_id=0x%p", &nsp_data_base, dev_id);
977
978 base = data->BaseAddress;
979 //nsp_dbg(NSP_DEBUG_INTR, "base=0x%x", base);
980
981 /*
982 * interrupt check
983 */
984 nsp_write(base, IRQCONTROL, IRQCONTROL_IRQDISABLE);
985 irq_status = nsp_read(base, IRQSTATUS);
986 //nsp_dbg(NSP_DEBUG_INTR, "irq_status=0x%x", irq_status);
987 if ((irq_status == 0xff) || ((irq_status & IRQSTATUS_MASK) == 0)) {
988 nsp_write(base, IRQCONTROL, 0);
989 //nsp_dbg(NSP_DEBUG_INTR, "no irq/shared irq");
990 return IRQ_NONE;
991 }
992
993 /* XXX: IMPORTANT
994 * Do not read an irq_phase register if no scsi phase interrupt.
995 * Unless, you should lose a scsi phase interrupt.
996 */
997 phase = nsp_index_read(base, SCSIBUSMON);
998 if((irq_status & IRQSTATUS_SCSI) != 0) {
999 irq_phase = nsp_index_read(base, IRQPHASESENCE);
1000 } else {
1001 irq_phase = 0;
1002 }
1003
1004 //nsp_dbg(NSP_DEBUG_INTR, "irq_phase=0x%x", irq_phase);
1005
1006 /*
1007 * timer interrupt handler (scsi vs timer interrupts)
1008 */
1009 //nsp_dbg(NSP_DEBUG_INTR, "timercount=%d", data->TimerCount);
1010 if (data->TimerCount != 0) {
1011 //nsp_dbg(NSP_DEBUG_INTR, "stop timer");
1012 nsp_index_write(base, TIMERCOUNT, 0);
1013 nsp_index_write(base, TIMERCOUNT, 0);
1014 data->TimerCount = 0;
1015 }
1016
1017 if ((irq_status & IRQSTATUS_MASK) == IRQSTATUS_TIMER &&
1018 data->SelectionTimeOut == 0) {
1019 //nsp_dbg(NSP_DEBUG_INTR, "timer start");
1020 nsp_write(base, IRQCONTROL, IRQCONTROL_TIMER_CLEAR);
1021 return IRQ_HANDLED;
1022 }
1023
1024 nsp_write(base, IRQCONTROL, IRQCONTROL_TIMER_CLEAR | IRQCONTROL_FIFO_CLEAR);
1025
1026 if ((irq_status & IRQSTATUS_SCSI) &&
1027 (irq_phase & SCSI_RESET_IRQ)) {
1028 nsp_msg(KERN_ERR, "bus reset (power off?)");
1029
1030 nsphw_init(data);
1031 nsp_bus_reset(data);
1032
1033 if(data->CurrentSC != NULL) {
1034 tmpSC = data->CurrentSC;
1035 tmpSC->result = (DID_RESET << 16) |
1036 ((tmpSC->SCp.Message & 0xff) << 8) |
1037 ((tmpSC->SCp.Status & 0xff) << 0);
1038 nsp_scsi_done(tmpSC);
1039 }
1040 return IRQ_HANDLED;
1041 }
1042
1043 if (data->CurrentSC == NULL) {
1044 nsp_msg(KERN_ERR, "CurrentSC==NULL irq_status=0x%x phase=0x%x irq_phase=0x%x this can't be happen. reset everything", irq_status, phase, irq_phase);
1045 nsphw_init(data);
1046 nsp_bus_reset(data);
1047 return IRQ_HANDLED;
1048 }
1049
1050 tmpSC = data->CurrentSC;
1051 target = tmpSC->device->id;
1052 lun = tmpSC->device->lun;
1053 sync_neg = &(data->Sync[target].SyncNegotiation);
1054
1055 /*
1056 * parse hardware SCSI irq reasons register
1057 */
1058 if (irq_status & IRQSTATUS_SCSI) {
1059 if (irq_phase & RESELECT_IRQ) {
1060 nsp_dbg(NSP_DEBUG_INTR, "reselect");
1061 nsp_write(base, IRQCONTROL, IRQCONTROL_RESELECT_CLEAR);
1062 if (nsp_reselected(tmpSC) != FALSE) {
1063 return IRQ_HANDLED;
1064 }
1065 }
1066
1067 if ((irq_phase & (PHASE_CHANGE_IRQ | LATCHED_BUS_FREE)) == 0) {
1068 return IRQ_HANDLED;
1069 }
1070 }
1071
1072 //show_phase(tmpSC);
1073
1074 switch(tmpSC->SCp.phase) {
1075 case PH_SELSTART:
1076 // *sync_neg = SYNC_NOT_YET;
1077 if ((phase & BUSMON_BSY) == 0) {
1078 //nsp_dbg(NSP_DEBUG_INTR, "selection count=%d", data->SelectionTimeOut);
1079 if (data->SelectionTimeOut >= NSP_SELTIMEOUT) {
1080 nsp_dbg(NSP_DEBUG_INTR, "selection time out");
1081 data->SelectionTimeOut = 0;
1082 nsp_index_write(base, SCSIBUSCTRL, 0);
1083
1084 tmpSC->result = DID_TIME_OUT << 16;
1085 nsp_scsi_done(tmpSC);
1086
1087 return IRQ_HANDLED;
1088 }
1089 data->SelectionTimeOut += 1;
1090 nsp_start_timer(tmpSC, 1000/51);
1091 return IRQ_HANDLED;
1092 }
1093
1094 /* attention assert */
1095 //nsp_dbg(NSP_DEBUG_INTR, "attention assert");
1096 data->SelectionTimeOut = 0;
1097 tmpSC->SCp.phase = PH_SELECTED;
1098 nsp_index_write(base, SCSIBUSCTRL, SCSI_ATN);
1099 udelay(1);
1100 nsp_index_write(base, SCSIBUSCTRL, SCSI_ATN | AUTODIRECTION | ACKENB);
1101 return IRQ_HANDLED;
1102
1103 break;
1104
1105 case PH_RESELECT:
1106 //nsp_dbg(NSP_DEBUG_INTR, "phase reselect");
1107 // *sync_neg = SYNC_NOT_YET;
1108 if ((phase & BUSMON_PHASE_MASK) != BUSPHASE_MESSAGE_IN) {
1109
1110 tmpSC->result = DID_ABORT << 16;
1111 nsp_scsi_done(tmpSC);
1112 return IRQ_HANDLED;
1113 }
1114 /* fall thru */
1115 default:
1116 if ((irq_status & (IRQSTATUS_SCSI | IRQSTATUS_FIFO)) == 0) {
1117 return IRQ_HANDLED;
1118 }
1119 break;
1120 }
1121
1122 /*
1123 * SCSI sequencer
1124 */
1125 //nsp_dbg(NSP_DEBUG_INTR, "start scsi seq");
1126
1127 /* normal disconnect */
1128 if (((tmpSC->SCp.phase == PH_MSG_IN) || (tmpSC->SCp.phase == PH_MSG_OUT)) &&
1129 (irq_phase & LATCHED_BUS_FREE) != 0 ) {
1130 nsp_dbg(NSP_DEBUG_INTR, "normal disconnect irq_status=0x%x, phase=0x%x, irq_phase=0x%x", irq_status, phase, irq_phase);
1131
1132 //*sync_neg = SYNC_NOT_YET;
1133
1134 if ((tmpSC->SCp.Message == MSG_COMMAND_COMPLETE)) { /* all command complete and return status */
1135 tmpSC->result = (DID_OK << 16) |
1136 ((tmpSC->SCp.Message & 0xff) << 8) |
1137 ((tmpSC->SCp.Status & 0xff) << 0);
1138 nsp_dbg(NSP_DEBUG_INTR, "command complete result=0x%x", tmpSC->result);
1139 nsp_scsi_done(tmpSC);
1140
1141 return IRQ_HANDLED;
1142 }
1143
1144 return IRQ_HANDLED;
1145 }
1146
1147
1148 /* check unexpected bus free state */
1149 if (phase == 0) {
1150 nsp_msg(KERN_DEBUG, "unexpected bus free. irq_status=0x%x, phase=0x%x, irq_phase=0x%x", irq_status, phase, irq_phase);
1151
1152 *sync_neg = SYNC_NG;
1153 tmpSC->result = DID_ERROR << 16;
1154 nsp_scsi_done(tmpSC);
1155 return IRQ_HANDLED;
1156 }
1157
1158 switch (phase & BUSMON_PHASE_MASK) {
1159 case BUSPHASE_COMMAND:
1160 nsp_dbg(NSP_DEBUG_INTR, "BUSPHASE_COMMAND");
1161 if ((phase & BUSMON_REQ) == 0) {
1162 nsp_dbg(NSP_DEBUG_INTR, "REQ == 0");
1163 return IRQ_HANDLED;
1164 }
1165
1166 tmpSC->SCp.phase = PH_COMMAND;
1167
1168 nsp_nexus(tmpSC);
1169
1170 /* write scsi command */
1171 nsp_dbg(NSP_DEBUG_INTR, "cmd_len=%d", tmpSC->cmd_len);
1172 nsp_index_write(base, COMMANDCTRL, CLEAR_COMMAND_POINTER);
1173 for (i = 0; i < tmpSC->cmd_len; i++) {
1174 nsp_index_write(base, COMMANDDATA, tmpSC->cmnd[i]);
1175 }
1176 nsp_index_write(base, COMMANDCTRL, CLEAR_COMMAND_POINTER | AUTO_COMMAND_GO);
1177 break;
1178
1179 case BUSPHASE_DATA_OUT:
1180 nsp_dbg(NSP_DEBUG_INTR, "BUSPHASE_DATA_OUT");
1181
1182 tmpSC->SCp.phase = PH_DATA;
1183 tmpSC->SCp.have_data_in = IO_OUT;
1184
1185 nsp_pio_write(tmpSC);
1186
1187 break;
1188
1189 case BUSPHASE_DATA_IN:
1190 nsp_dbg(NSP_DEBUG_INTR, "BUSPHASE_DATA_IN");
1191
1192 tmpSC->SCp.phase = PH_DATA;
1193 tmpSC->SCp.have_data_in = IO_IN;
1194
1195 nsp_pio_read(tmpSC);
1196
1197 break;
1198
1199 case BUSPHASE_STATUS:
1200 nsp_dataphase_bypass(tmpSC);
1201 nsp_dbg(NSP_DEBUG_INTR, "BUSPHASE_STATUS");
1202
1203 tmpSC->SCp.phase = PH_STATUS;
1204
1205 tmpSC->SCp.Status = nsp_index_read(base, SCSIDATAWITHACK);
1206 nsp_dbg(NSP_DEBUG_INTR, "message=0x%x status=0x%x", tmpSC->SCp.Message, tmpSC->SCp.Status);
1207
1208 break;
1209
1210 case BUSPHASE_MESSAGE_OUT:
1211 nsp_dbg(NSP_DEBUG_INTR, "BUSPHASE_MESSAGE_OUT");
1212 if ((phase & BUSMON_REQ) == 0) {
1213 goto timer_out;
1214 }
1215
1216 tmpSC->SCp.phase = PH_MSG_OUT;
1217
1218 //*sync_neg = SYNC_NOT_YET;
1219
1220 data->MsgLen = i = 0;
1221 data->MsgBuffer[i] = IDENTIFY(TRUE, lun); i++;
1222
1223 if (*sync_neg == SYNC_NOT_YET) {
1224 data->Sync[target].SyncPeriod = 0;
1225 data->Sync[target].SyncOffset = 0;
1226
1227 /**/
1228 data->MsgBuffer[i] = MSG_EXTENDED; i++;
1229 data->MsgBuffer[i] = 3; i++;
1230 data->MsgBuffer[i] = MSG_EXT_SDTR; i++;
1231 data->MsgBuffer[i] = 0x0c; i++;
1232 data->MsgBuffer[i] = 15; i++;
1233 /**/
1234 }
1235 data->MsgLen = i;
1236
1237 nsp_analyze_sdtr(tmpSC);
1238 show_message(data);
1239 nsp_message_out(tmpSC);
1240 break;
1241
1242 case BUSPHASE_MESSAGE_IN:
1243 nsp_dataphase_bypass(tmpSC);
1244 nsp_dbg(NSP_DEBUG_INTR, "BUSPHASE_MESSAGE_IN");
1245 if ((phase & BUSMON_REQ) == 0) {
1246 goto timer_out;
1247 }
1248
1249 tmpSC->SCp.phase = PH_MSG_IN;
1250 nsp_message_in(tmpSC);
1251
1252 /**/
1253 if (*sync_neg == SYNC_NOT_YET) {
1254 //nsp_dbg(NSP_DEBUG_INTR, "sync target=%d,lun=%d",target,lun);
1255
1256 if (data->MsgLen >= 5 &&
1257 data->MsgBuffer[0] == MSG_EXTENDED &&
1258 data->MsgBuffer[1] == 3 &&
1259 data->MsgBuffer[2] == MSG_EXT_SDTR ) {
1260 data->Sync[target].SyncPeriod = data->MsgBuffer[3];
1261 data->Sync[target].SyncOffset = data->MsgBuffer[4];
1262 //nsp_dbg(NSP_DEBUG_INTR, "sync ok, %d %d", data->MsgBuffer[3], data->MsgBuffer[4]);
1263 *sync_neg = SYNC_OK;
1264 } else {
1265 data->Sync[target].SyncPeriod = 0;
1266 data->Sync[target].SyncOffset = 0;
1267 *sync_neg = SYNC_NG;
1268 }
1269 nsp_analyze_sdtr(tmpSC);
1270 }
1271 /**/
1272
1273 /* search last messeage byte */
1274 tmp = -1;
1275 for (i = 0; i < data->MsgLen; i++) {
1276 tmp = data->MsgBuffer[i];
1277 if (data->MsgBuffer[i] == MSG_EXTENDED) {
1278 i += (1 + data->MsgBuffer[i+1]);
1279 }
1280 }
1281 tmpSC->SCp.Message = tmp;
1282
1283 nsp_dbg(NSP_DEBUG_INTR, "message=0x%x len=%d", tmpSC->SCp.Message, data->MsgLen);
1284 show_message(data);
1285
1286 break;
1287
1288 case BUSPHASE_SELECT:
1289 default:
1290 nsp_dbg(NSP_DEBUG_INTR, "BUSPHASE other");
1291
1292 break;
1293 }
1294
1295 //nsp_dbg(NSP_DEBUG_INTR, "out");
1296 return IRQ_HANDLED;
1297
1298 timer_out:
1299 nsp_start_timer(tmpSC, 1000/102);
1300 return IRQ_HANDLED;
1301 }
1302
1303 #ifdef NSP_DEBUG
1304 #include "nsp_debug.c"
1305 #endif /* NSP_DEBUG */
1306
1307 /*----------------------------------------------------------------*/
1308 /* look for ninja3 card and init if found */
1309 /*----------------------------------------------------------------*/
1310 static struct Scsi_Host *nsp_detect(struct scsi_host_template *sht)
1311 {
1312 struct Scsi_Host *host; /* registered host structure */
1313 nsp_hw_data *data_b = &nsp_data_base, *data;
1314
1315 nsp_dbg(NSP_DEBUG_INIT, "this_id=%d", sht->this_id);
1316 #if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73))
1317 host = scsi_host_alloc(&nsp_driver_template, sizeof(nsp_hw_data));
1318 #else
1319 host = scsi_register(sht, sizeof(nsp_hw_data));
1320 #endif
1321 if (host == NULL) {
1322 nsp_dbg(NSP_DEBUG_INIT, "host failed");
1323 return NULL;
1324 }
1325
1326 memcpy(host->hostdata, data_b, sizeof(nsp_hw_data));
1327 data = (nsp_hw_data *)host->hostdata;
1328 data->ScsiInfo->host = host;
1329 #ifdef NSP_DEBUG
1330 data->CmdId = 0;
1331 #endif
1332
1333 nsp_dbg(NSP_DEBUG_INIT, "irq=%d,%d", data_b->IrqNumber, ((nsp_hw_data *)host->hostdata)->IrqNumber);
1334
1335 host->unique_id = data->BaseAddress;
1336 host->io_port = data->BaseAddress;
1337 host->n_io_port = data->NumAddress;
1338 host->irq = data->IrqNumber;
1339 host->base = data->MmioAddress;
1340
1341 spin_lock_init(&(data->Lock));
1342
1343 snprintf(data->nspinfo,
1344 sizeof(data->nspinfo),
1345 "NinjaSCSI-3/32Bi Driver $Revision: 1.23 $ IO:0x%04lx-0x%04lx MMIO(virt addr):0x%04lx IRQ:%02d",
1346 host->io_port, host->io_port + host->n_io_port - 1,
1347 host->base,
1348 host->irq);
1349 sht->name = data->nspinfo;
1350
1351 nsp_dbg(NSP_DEBUG_INIT, "end");
1352
1353
1354 return host; /* detect done. */
1355 }
1356
1357 #if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
1358 static int nsp_detect_old(struct scsi_host_template *sht)
1359 {
1360 if (nsp_detect(sht) == NULL) {
1361 return 0;
1362 } else {
1363 //MOD_INC_USE_COUNT;
1364 return 1;
1365 }
1366 }
1367
1368
1369 static int nsp_release_old(struct Scsi_Host *shpnt)
1370 {
1371 //nsp_hw_data *data = (nsp_hw_data *)shpnt->hostdata;
1372
1373 /* PCMCIA Card Service dose same things below. */
1374 /* So we do nothing. */
1375 //if (shpnt->irq) {
1376 // free_irq(shpnt->irq, data->ScsiInfo);
1377 //}
1378 //if (shpnt->io_port) {
1379 // release_region(shpnt->io_port, shpnt->n_io_port);
1380 //}
1381
1382 //MOD_DEC_USE_COUNT;
1383
1384 return 0;
1385 }
1386 #endif
1387
1388 /*----------------------------------------------------------------*/
1389 /* return info string */
1390 /*----------------------------------------------------------------*/
1391 static const char *nsp_info(struct Scsi_Host *shpnt)
1392 {
1393 nsp_hw_data *data = (nsp_hw_data *)shpnt->hostdata;
1394
1395 return data->nspinfo;
1396 }
1397
1398 #undef SPRINTF
1399 #define SPRINTF(args...) \
1400 do { \
1401 if(length > (pos - buffer)) { \
1402 pos += snprintf(pos, length - (pos - buffer) + 1, ## args); \
1403 nsp_dbg(NSP_DEBUG_PROC, "buffer=0x%p pos=0x%p length=%d %d\n", buffer, pos, length, length - (pos - buffer));\
1404 } \
1405 } while(0)
1406 static int
1407 nsp_proc_info(
1408 #if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73))
1409 struct Scsi_Host *host,
1410 #endif
1411 char *buffer,
1412 char **start,
1413 off_t offset,
1414 int length,
1415 #if !(LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73))
1416 int hostno,
1417 #endif
1418 int inout)
1419 {
1420 int id;
1421 char *pos = buffer;
1422 int thislength;
1423 int speed;
1424 unsigned long flags;
1425 nsp_hw_data *data;
1426 #if !(LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73))
1427 struct Scsi_Host *host;
1428 #else
1429 int hostno;
1430 #endif
1431 if (inout) {
1432 return -EINVAL;
1433 }
1434
1435 #if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73))
1436 hostno = host->host_no;
1437 #else
1438 /* search this HBA host */
1439 host = scsi_host_hn_get(hostno);
1440 if (host == NULL) {
1441 return -ESRCH;
1442 }
1443 #endif
1444 data = (nsp_hw_data *)host->hostdata;
1445
1446
1447 SPRINTF("NinjaSCSI status\n\n");
1448 SPRINTF("Driver version: $Revision: 1.23 $\n");
1449 SPRINTF("SCSI host No.: %d\n", hostno);
1450 SPRINTF("IRQ: %d\n", host->irq);
1451 SPRINTF("IO: 0x%lx-0x%lx\n", host->io_port, host->io_port + host->n_io_port - 1);
1452 SPRINTF("MMIO(virtual address): 0x%lx-0x%lx\n", host->base, host->base + data->MmioLength - 1);
1453 SPRINTF("sg_tablesize: %d\n", host->sg_tablesize);
1454
1455 SPRINTF("burst transfer mode: ");
1456 switch (nsp_burst_mode) {
1457 case BURST_IO8:
1458 SPRINTF("io8");
1459 break;
1460 case BURST_IO32:
1461 SPRINTF("io32");
1462 break;
1463 case BURST_MEM32:
1464 SPRINTF("mem32");
1465 break;
1466 default:
1467 SPRINTF("???");
1468 break;
1469 }
1470 SPRINTF("\n");
1471
1472
1473 spin_lock_irqsave(&(data->Lock), flags);
1474 SPRINTF("CurrentSC: 0x%p\n\n", data->CurrentSC);
1475 spin_unlock_irqrestore(&(data->Lock), flags);
1476
1477 SPRINTF("SDTR status\n");
1478 for(id = 0; id < ARRAY_SIZE(data->Sync); id++) {
1479
1480 SPRINTF("id %d: ", id);
1481
1482 if (id == host->this_id) {
1483 SPRINTF("----- NinjaSCSI-3 host adapter\n");
1484 continue;
1485 }
1486
1487 switch(data->Sync[id].SyncNegotiation) {
1488 case SYNC_OK:
1489 SPRINTF(" sync");
1490 break;
1491 case SYNC_NG:
1492 SPRINTF("async");
1493 break;
1494 case SYNC_NOT_YET:
1495 SPRINTF(" none");
1496 break;
1497 default:
1498 SPRINTF("?????");
1499 break;
1500 }
1501
1502 if (data->Sync[id].SyncPeriod != 0) {
1503 speed = 1000000 / (data->Sync[id].SyncPeriod * 4);
1504
1505 SPRINTF(" transfer %d.%dMB/s, offset %d",
1506 speed / 1000,
1507 speed % 1000,
1508 data->Sync[id].SyncOffset
1509 );
1510 }
1511 SPRINTF("\n");
1512 }
1513
1514 thislength = pos - (buffer + offset);
1515
1516 if(thislength < 0) {
1517 *start = NULL;
1518 return 0;
1519 }
1520
1521
1522 thislength = min(thislength, length);
1523 *start = buffer + offset;
1524
1525 return thislength;
1526 }
1527 #undef SPRINTF
1528
1529 /*---------------------------------------------------------------*/
1530 /* error handler */
1531 /*---------------------------------------------------------------*/
1532
1533 /*
1534 static int nsp_eh_abort(struct scsi_cmnd *SCpnt)
1535 {
1536 nsp_dbg(NSP_DEBUG_BUSRESET, "SCpnt=0x%p", SCpnt);
1537
1538 return nsp_eh_bus_reset(SCpnt);
1539 }*/
1540
1541 static int nsp_bus_reset(nsp_hw_data *data)
1542 {
1543 unsigned int base = data->BaseAddress;
1544 int i;
1545
1546 nsp_write(base, IRQCONTROL, IRQCONTROL_ALLMASK);
1547
1548 nsp_index_write(base, SCSIBUSCTRL, SCSI_RST);
1549 mdelay(100); /* 100ms */
1550 nsp_index_write(base, SCSIBUSCTRL, 0);
1551 for(i = 0; i < 5; i++) {
1552 nsp_index_read(base, IRQPHASESENCE); /* dummy read */
1553 }
1554
1555 nsphw_init_sync(data);
1556
1557 nsp_write(base, IRQCONTROL, IRQCONTROL_ALLCLEAR);
1558
1559 return SUCCESS;
1560 }
1561
1562 static int nsp_eh_bus_reset(struct scsi_cmnd *SCpnt)
1563 {
1564 nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata;
1565
1566 nsp_dbg(NSP_DEBUG_BUSRESET, "SCpnt=0x%p", SCpnt);
1567
1568 return nsp_bus_reset(data);
1569 }
1570
1571 static int nsp_eh_host_reset(struct scsi_cmnd *SCpnt)
1572 {
1573 nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata;
1574
1575 nsp_dbg(NSP_DEBUG_BUSRESET, "in");
1576
1577 nsphw_init(data);
1578
1579 return SUCCESS;
1580 }
1581
1582
1583 /**********************************************************************
1584 PCMCIA functions
1585 **********************************************************************/
1586
1587 /*======================================================================
1588 nsp_cs_attach() creates an "instance" of the driver, allocating
1589 local data structures for one device. The device is registered
1590 with Card Services.
1591
1592 The dev_link structure is initialized, but we don't actually
1593 configure the card at this point -- we wait until we receive a
1594 card insertion event.
1595 ======================================================================*/
1596 static int nsp_cs_probe(struct pcmcia_device *link)
1597 {
1598 scsi_info_t *info;
1599 nsp_hw_data *data = &nsp_data_base;
1600 int ret;
1601
1602 nsp_dbg(NSP_DEBUG_INIT, "in");
1603
1604 /* Create new SCSI device */
1605 info = kzalloc(sizeof(*info), GFP_KERNEL);
1606 if (info == NULL) { return -ENOMEM; }
1607 info->p_dev = link;
1608 link->priv = info;
1609 data->ScsiInfo = info;
1610
1611 nsp_dbg(NSP_DEBUG_INIT, "info=0x%p", info);
1612
1613 /* The io structure describes IO port mapping */
1614 link->io.NumPorts1 = 0x10;
1615 link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
1616 link->io.IOAddrLines = 10; /* not used */
1617
1618 /* Interrupt setup */
1619 link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
1620 link->irq.IRQInfo1 = IRQ_LEVEL_ID;
1621
1622 /* Interrupt handler */
1623 link->irq.Handler = &nspintr;
1624 link->irq.Instance = info;
1625 link->irq.Attributes |= IRQF_SHARED;
1626
1627 /* General socket configuration */
1628 link->conf.Attributes = CONF_ENABLE_IRQ;
1629 link->conf.IntType = INT_MEMORY_AND_IO;
1630
1631 ret = nsp_cs_config(link);
1632
1633 nsp_dbg(NSP_DEBUG_INIT, "link=0x%p", link);
1634 return ret;
1635 } /* nsp_cs_attach */
1636
1637
1638 /*======================================================================
1639 This deletes a driver "instance". The device is de-registered
1640 with Card Services. If it has been released, all local data
1641 structures are freed. Otherwise, the structures will be freed
1642 when the device is released.
1643 ======================================================================*/
1644 static void nsp_cs_detach(struct pcmcia_device *link)
1645 {
1646 nsp_dbg(NSP_DEBUG_INIT, "in, link=0x%p", link);
1647
1648 ((scsi_info_t *)link->priv)->stop = 1;
1649 nsp_cs_release(link);
1650
1651 kfree(link->priv);
1652 link->priv = NULL;
1653 } /* nsp_cs_detach */
1654
1655
1656 /*======================================================================
1657 nsp_cs_config() is scheduled to run after a CARD_INSERTION event
1658 is received, to configure the PCMCIA socket, and to make the
1659 ethernet device available to the system.
1660 ======================================================================*/
1661 #define CS_CHECK(fn, ret) \
1662 do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
1663 /*====================================================================*/
1664 static int nsp_cs_config(struct pcmcia_device *link)
1665 {
1666 int ret;
1667 scsi_info_t *info = link->priv;
1668 tuple_t tuple;
1669 cisparse_t parse;
1670 int last_ret, last_fn;
1671 unsigned char tuple_data[64];
1672 config_info_t conf;
1673 win_req_t req;
1674 memreq_t map;
1675 cistpl_cftable_entry_t dflt = { 0 };
1676 struct Scsi_Host *host;
1677 nsp_hw_data *data = &nsp_data_base;
1678 #if !(LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,74))
1679 struct scsi_device *dev;
1680 dev_node_t **tail, *node;
1681 #endif
1682
1683 nsp_dbg(NSP_DEBUG_INIT, "in");
1684
1685 tuple.Attributes = 0;
1686 tuple.TupleData = tuple_data;
1687 tuple.TupleDataMax = sizeof(tuple_data);
1688 tuple.TupleOffset = 0;
1689
1690 /* Look up the current Vcc */
1691 CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(link, &conf));
1692
1693 tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
1694 CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
1695 while (1) {
1696 cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
1697
1698 if (pcmcia_get_tuple_data(link, &tuple) != 0 ||
1699 pcmcia_parse_tuple(link, &tuple, &parse) != 0)
1700 goto next_entry;
1701
1702 if (cfg->flags & CISTPL_CFTABLE_DEFAULT) { dflt = *cfg; }
1703 if (cfg->index == 0) { goto next_entry; }
1704 link->conf.ConfigIndex = cfg->index;
1705
1706 /* Does this card need audio output? */
1707 if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
1708 link->conf.Attributes |= CONF_ENABLE_SPKR;
1709 link->conf.Status = CCSR_AUDIO_ENA;
1710 }
1711
1712 /* Use power settings for Vcc and Vpp if present */
1713 /* Note that the CIS values need to be rescaled */
1714 if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) {
1715 if (conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM]/10000) {
1716 goto next_entry;
1717 }
1718 } else if (dflt.vcc.present & (1<<CISTPL_POWER_VNOM)) {
1719 if (conf.Vcc != dflt.vcc.param[CISTPL_POWER_VNOM]/10000) {
1720 goto next_entry;
1721 }
1722 }
1723
1724 if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) {
1725 link->conf.Vpp =
1726 cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
1727 } else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM)) {
1728 link->conf.Vpp =
1729 dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
1730 }
1731
1732 /* Do we need to allocate an interrupt? */
1733 if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1) {
1734 link->conf.Attributes |= CONF_ENABLE_IRQ;
1735 }
1736
1737 /* IO window settings */
1738 link->io.NumPorts1 = link->io.NumPorts2 = 0;
1739 if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
1740 cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
1741 link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
1742 if (!(io->flags & CISTPL_IO_8BIT))
1743 link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
1744 if (!(io->flags & CISTPL_IO_16BIT))
1745 link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
1746 link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
1747 link->io.BasePort1 = io->win[0].base;
1748 link->io.NumPorts1 = io->win[0].len;
1749 if (io->nwin > 1) {
1750 link->io.Attributes2 = link->io.Attributes1;
1751 link->io.BasePort2 = io->win[1].base;
1752 link->io.NumPorts2 = io->win[1].len;
1753 }
1754 /* This reserves IO space but doesn't actually enable it */
1755 if (pcmcia_request_io(link, &link->io) != 0)
1756 goto next_entry;
1757 }
1758
1759 if ((cfg->mem.nwin > 0) || (dflt.mem.nwin > 0)) {
1760 cistpl_mem_t *mem =
1761 (cfg->mem.nwin) ? &cfg->mem : &dflt.mem;
1762 req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM;
1763 req.Attributes |= WIN_ENABLE;
1764 req.Base = mem->win[0].host_addr;
1765 req.Size = mem->win[0].len;
1766 if (req.Size < 0x1000) {
1767 req.Size = 0x1000;
1768 }
1769 req.AccessSpeed = 0;
1770 if (pcmcia_request_window(&link, &req, &link->win) != 0)
1771 goto next_entry;
1772 map.Page = 0; map.CardOffset = mem->win[0].card_addr;
1773 if (pcmcia_map_mem_page(link->win, &map) != 0)
1774 goto next_entry;
1775
1776 data->MmioAddress = (unsigned long)ioremap_nocache(req.Base, req.Size);
1777 data->MmioLength = req.Size;
1778 }
1779 /* If we got this far, we're cool! */
1780 break;
1781
1782 next_entry:
1783 nsp_dbg(NSP_DEBUG_INIT, "next");
1784 pcmcia_disable_device(link);
1785 CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple));
1786 }
1787
1788 if (link->conf.Attributes & CONF_ENABLE_IRQ) {
1789 CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
1790 }
1791 CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
1792
1793 if (free_ports) {
1794 if (link->io.BasePort1) {
1795 release_region(link->io.BasePort1, link->io.NumPorts1);
1796 }
1797 if (link->io.BasePort2) {
1798 release_region(link->io.BasePort2, link->io.NumPorts2);
1799 }
1800 }
1801
1802 /* Set port and IRQ */
1803 data->BaseAddress = link->io.BasePort1;
1804 data->NumAddress = link->io.NumPorts1;
1805 data->IrqNumber = link->irq.AssignedIRQ;
1806
1807 nsp_dbg(NSP_DEBUG_INIT, "I/O[0x%x+0x%x] IRQ %d",
1808 data->BaseAddress, data->NumAddress, data->IrqNumber);
1809
1810 if(nsphw_init(data) == FALSE) {
1811 goto cs_failed;
1812 }
1813
1814 #if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,2))
1815 host = nsp_detect(&nsp_driver_template);
1816 #else
1817 scsi_register_host(&nsp_driver_template);
1818 for (host = scsi_host_get_next(NULL); host != NULL;
1819 host = scsi_host_get_next(host)) {
1820 if (host->hostt == &nsp_driver_template) {
1821 break;
1822 }
1823 }
1824 #endif
1825
1826 if (host == NULL) {
1827 nsp_dbg(NSP_DEBUG_INIT, "detect failed");
1828 goto cs_failed;
1829 }
1830
1831
1832 #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,74))
1833 ret = scsi_add_host (host, NULL);
1834 if (ret)
1835 goto cs_failed;
1836
1837 scsi_scan_host(host);
1838
1839 snprintf(info->node.dev_name, sizeof(info->node.dev_name), "scsi%d", host->host_no);
1840 link->dev_node = &info->node;
1841 info->host = host;
1842
1843 #else
1844 nsp_dbg(NSP_DEBUG_INIT, "GET_SCSI_INFO");
1845 tail = &link->dev_node;
1846 info->ndev = 0;
1847
1848 nsp_dbg(NSP_DEBUG_INIT, "host=0x%p", host);
1849
1850 for (dev = host->host_queue; dev != NULL; dev = dev->next) {
1851 unsigned long id;
1852 id = (dev->id & 0x0f) + ((dev->lun & 0x0f) << 4) +
1853 ((dev->channel & 0x0f) << 8) +
1854 ((dev->host->host_no & 0x0f) << 12);
1855 node = &info->node[info->ndev];
1856 node->minor = 0;
1857 switch (dev->type) {
1858 case TYPE_TAPE:
1859 node->major = SCSI_TAPE_MAJOR;
1860 snprintf(node->dev_name, sizeof(node->dev_name), "st#%04lx", id);
1861 break;
1862 case TYPE_DISK:
1863 case TYPE_MOD:
1864 node->major = SCSI_DISK0_MAJOR;
1865 snprintf(node->dev_name, sizeof(node->dev_name), "sd#%04lx", id);
1866 break;
1867 case TYPE_ROM:
1868 case TYPE_WORM:
1869 node->major = SCSI_CDROM_MAJOR;
1870 snprintf(node->dev_name, sizeof(node->dev_name), "sr#%04lx", id);
1871 break;
1872 default:
1873 node->major = SCSI_GENERIC_MAJOR;
1874 snprintf(node->dev_name, sizeof(node->dev_name), "sg#%04lx", id);
1875 break;
1876 }
1877 *tail = node; tail = &node->next;
1878 info->ndev++;
1879 info->host = dev->host;
1880 }
1881
1882 *tail = NULL;
1883 if (info->ndev == 0) {
1884 nsp_msg(KERN_INFO, "no SCSI devices found");
1885 }
1886 nsp_dbg(NSP_DEBUG_INIT, "host=0x%p", host);
1887 #endif
1888
1889 /* Finally, report what we've done */
1890 printk(KERN_INFO "nsp_cs: index 0x%02x: ",
1891 link->conf.ConfigIndex);
1892 if (link->conf.Vpp) {
1893 printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10);
1894 }
1895 if (link->conf.Attributes & CONF_ENABLE_IRQ) {
1896 printk(", irq %d", link->irq.AssignedIRQ);
1897 }
1898 if (link->io.NumPorts1) {
1899 printk(", io 0x%04x-0x%04x", link->io.BasePort1,
1900 link->io.BasePort1+link->io.NumPorts1-1);
1901 }
1902 if (link->io.NumPorts2)
1903 printk(" & 0x%04x-0x%04x", link->io.BasePort2,
1904 link->io.BasePort2+link->io.NumPorts2-1);
1905 if (link->win)
1906 printk(", mem 0x%06lx-0x%06lx", req.Base,
1907 req.Base+req.Size-1);
1908 printk("\n");
1909
1910 return 0;
1911
1912 cs_failed:
1913 nsp_dbg(NSP_DEBUG_INIT, "config fail");
1914 cs_error(link, last_fn, last_ret);
1915 nsp_cs_release(link);
1916
1917 return -ENODEV;
1918 } /* nsp_cs_config */
1919 #undef CS_CHECK
1920
1921
1922 /*======================================================================
1923 After a card is removed, nsp_cs_release() will unregister the net
1924 device, and release the PCMCIA configuration. If the device is
1925 still open, this will be postponed until it is closed.
1926 ======================================================================*/
1927 static void nsp_cs_release(struct pcmcia_device *link)
1928 {
1929 scsi_info_t *info = link->priv;
1930 nsp_hw_data *data = NULL;
1931
1932 if (info->host == NULL) {
1933 nsp_msg(KERN_DEBUG, "unexpected card release call.");
1934 } else {
1935 data = (nsp_hw_data *)info->host->hostdata;
1936 }
1937
1938 nsp_dbg(NSP_DEBUG_INIT, "link=0x%p", link);
1939
1940 /* Unlink the device chain */
1941 #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,2))
1942 if (info->host != NULL) {
1943 scsi_remove_host(info->host);
1944 }
1945 #else
1946 scsi_unregister_host(&nsp_driver_template);
1947 #endif
1948 link->dev_node = NULL;
1949
1950 if (link->win) {
1951 if (data != NULL) {
1952 iounmap((void *)(data->MmioAddress));
1953 }
1954 }
1955 pcmcia_disable_device(link);
1956
1957 #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,2))
1958 if (info->host != NULL) {
1959 scsi_host_put(info->host);
1960 }
1961 #endif
1962 } /* nsp_cs_release */
1963
1964 static int nsp_cs_suspend(struct pcmcia_device *link)
1965 {
1966 scsi_info_t *info = link->priv;
1967 nsp_hw_data *data;
1968
1969 nsp_dbg(NSP_DEBUG_INIT, "event: suspend");
1970
1971 if (info->host != NULL) {
1972 nsp_msg(KERN_INFO, "clear SDTR status");
1973
1974 data = (nsp_hw_data *)info->host->hostdata;
1975
1976 nsphw_init_sync(data);
1977 }
1978
1979 info->stop = 1;
1980
1981 return 0;
1982 }
1983
1984 static int nsp_cs_resume(struct pcmcia_device *link)
1985 {
1986 scsi_info_t *info = link->priv;
1987 nsp_hw_data *data;
1988
1989 nsp_dbg(NSP_DEBUG_INIT, "event: resume");
1990
1991 info->stop = 0;
1992
1993 if (info->host != NULL) {
1994 nsp_msg(KERN_INFO, "reset host and bus");
1995
1996 data = (nsp_hw_data *)info->host->hostdata;
1997
1998 nsphw_init (data);
1999 nsp_bus_reset(data);
2000 }
2001
2002 return 0;
2003 }
2004
2005 /*======================================================================*
2006 * module entry point
2007 *====================================================================*/
2008 #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,68))
2009 static struct pcmcia_device_id nsp_cs_ids[] = {
2010 PCMCIA_DEVICE_PROD_ID123("IO DATA", "CBSC16 ", "1", 0x547e66dc, 0x0d63a3fd, 0x51de003a),
2011 PCMCIA_DEVICE_PROD_ID123("KME ", "SCSI-CARD-001", "1", 0x534c02bc, 0x52008408, 0x51de003a),
2012 PCMCIA_DEVICE_PROD_ID123("KME ", "SCSI-CARD-002", "1", 0x534c02bc, 0xcb09d5b2, 0x51de003a),
2013 PCMCIA_DEVICE_PROD_ID123("KME ", "SCSI-CARD-003", "1", 0x534c02bc, 0xbc0ee524, 0x51de003a),
2014 PCMCIA_DEVICE_PROD_ID123("KME ", "SCSI-CARD-004", "1", 0x534c02bc, 0x226a7087, 0x51de003a),
2015 PCMCIA_DEVICE_PROD_ID123("WBT", "NinjaSCSI-3", "R1.0", 0xc7ba805f, 0xfdc7c97d, 0x6973710e),
2016 PCMCIA_DEVICE_PROD_ID123("WORKBIT", "UltraNinja-16", "1", 0x28191418, 0xb70f4b09, 0x51de003a),
2017 PCMCIA_DEVICE_NULL
2018 };
2019 MODULE_DEVICE_TABLE(pcmcia, nsp_cs_ids);
2020
2021 static struct pcmcia_driver nsp_driver = {
2022 .owner = THIS_MODULE,
2023 .drv = {
2024 .name = "nsp_cs",
2025 },
2026 .probe = nsp_cs_probe,
2027 .remove = nsp_cs_detach,
2028 .id_table = nsp_cs_ids,
2029 .suspend = nsp_cs_suspend,
2030 .resume = nsp_cs_resume,
2031 };
2032 #endif
2033
2034 static int __init nsp_cs_init(void)
2035 {
2036 #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,68))
2037 nsp_msg(KERN_INFO, "loading...");
2038
2039 return pcmcia_register_driver(&nsp_driver);
2040 #else
2041 servinfo_t serv;
2042
2043 nsp_msg(KERN_INFO, "loading...");
2044 pcmcia_get_card_services_info(&serv);
2045 if (serv.Revision != CS_RELEASE_CODE) {
2046 nsp_msg(KERN_DEBUG, "Card Services release does not match!");
2047 return -EINVAL;
2048 }
2049 register_pcmcia_driver(&dev_info, &nsp_cs_attach, &nsp_cs_detach);
2050
2051 nsp_dbg(NSP_DEBUG_INIT, "out");
2052 return 0;
2053 #endif
2054 }
2055
2056 static void __exit nsp_cs_exit(void)
2057 {
2058 nsp_msg(KERN_INFO, "unloading...");
2059 pcmcia_unregister_driver(&nsp_driver);
2060 }
2061
2062
2063 module_init(nsp_cs_init)
2064 module_exit(nsp_cs_exit)
2065
2066 /* end */
WRT350N Kernel Patches