sched: make early bootup sched_clock() use safer

[wrt350n-kernel.git] / drivers / block / xsysace.c

/*
 * Xilinx SystemACE device driver
 *
 * Copyright 2007 Secret Lab Technologies Ltd.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License version 2 as published
 * by the Free Software Foundation.
 */

/*
 * The SystemACE chip is designed to configure FPGAs by loading an FPGA
 * bitstream from a file on a CF card and squirting it into FPGAs connected
 * to the SystemACE JTAG chain.  It also has the advantage of providing an
 * MPU interface which can be used to control the FPGA configuration process
 * and to use the attached CF card for general purpose storage.
 *
 * This driver is a block device driver for the SystemACE.
 *
 * Initialization:
 *    The driver registers itself as a platform_device driver at module
 *    load time.  The platform bus will take care of calling the
 *    ace_probe() method for all SystemACE instances in the system.  Any
 *    number of SystemACE instances are supported.  ace_probe() calls
 *    ace_setup() which initialized all data structures, reads the CF
 *    id structure and registers the device.
 *
 * Processing:
 *    Just about all of the heavy lifting in this driver is performed by
 *    a Finite State Machine (FSM).  The driver needs to wait on a number
 *    of events; some raised by interrupts, some which need to be polled
 *    for.  Describing all of the behaviour in a FSM seems to be the
 *    easiest way to keep the complexity low and make it easy to
 *    understand what the driver is doing.  If the block ops or the
 *    request function need to interact with the hardware, then they
 *    simply need to flag the request and kick of FSM processing.
 *
 *    The FSM itself is atomic-safe code which can be run from any
 *    context.  The general process flow is:
 *    1. obtain the ace->lock spinlock.
 *    2. loop on ace_fsm_dostate() until the ace->fsm_continue flag is
 *       cleared.
 *    3. release the lock.
 *
 *    Individual states do not sleep in any way.  If a condition needs to
 *    be waited for then the state much clear the fsm_continue flag and
 *    either schedule the FSM to be run again at a later time, or expect
 *    an interrupt to call the FSM when the desired condition is met.
 *
 *    In normal operation, the FSM is processed at interrupt context
 *    either when the driver's tasklet is scheduled, or when an irq is
 *    raised by the hardware.  The tasklet can be scheduled at any time.
 *    The request method in particular schedules the tasklet when a new
 *    request has been indicated by the block layer.  Once started, the
 *    FSM proceeds as far as it can processing the request until it
 *    needs on a hardware event.  At this point, it must yield execution.
 *
 *    A state has two options when yielding execution:
 *    1. ace_fsm_yield()
 *       - Call if need to poll for event.
 *       - clears the fsm_continue flag to exit the processing loop
 *       - reschedules the tasklet to run again as soon as possible
 *    2. ace_fsm_yieldirq()
 *       - Call if an irq is expected from the HW
 *       - clears the fsm_continue flag to exit the processing loop
 *       - does not reschedule the tasklet so the FSM will not be processed
 *         again until an irq is received.
 *    After calling a yield function, the state must return control back
 *    to the FSM main loop.
 *
 *    Additionally, the driver maintains a kernel timer which can process
 *    the FSM.  If the FSM gets stalled, typically due to a missed
 *    interrupt, then the kernel timer will expire and the driver can
 *    continue where it left off.
 *
 * To Do:
 *    - Add FPGA configuration control interface.
 *    - Request major number from lanana
 */

#undef DEBUG

#include <linux/module.h>
#include <linux/ctype.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/blkdev.h>
#include <linux/hdreg.h>
#include <linux/platform_device.h>
#if defined(CONFIG_OF)
#include <linux/of_device.h>
#include <linux/of_platform.h>
#endif

MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>");
MODULE_DESCRIPTION("Xilinx SystemACE device driver");
MODULE_LICENSE("GPL");

/* SystemACE register definitions */
#define ACE_BUSMODE (0x00)

#define ACE_STATUS (0x04)
#define ACE_STATUS_CFGLOCK      (0x00000001)
#define ACE_STATUS_MPULOCK      (0x00000002)
#define ACE_STATUS_CFGERROR     (0x00000004)    /* config controller error */
#define ACE_STATUS_CFCERROR     (0x00000008)    /* CF controller error */
#define ACE_STATUS_CFDETECT     (0x00000010)
#define ACE_STATUS_DATABUFRDY   (0x00000020)
#define ACE_STATUS_DATABUFMODE  (0x00000040)
#define ACE_STATUS_CFGDONE      (0x00000080)
#define ACE_STATUS_RDYFORCFCMD  (0x00000100)
#define ACE_STATUS_CFGMODEPIN   (0x00000200)
#define ACE_STATUS_CFGADDR_MASK (0x0000e000)
#define ACE_STATUS_CFBSY        (0x00020000)
#define ACE_STATUS_CFRDY        (0x00040000)
#define ACE_STATUS_CFDWF        (0x00080000)
#define ACE_STATUS_CFDSC        (0x00100000)
#define ACE_STATUS_CFDRQ        (0x00200000)
#define ACE_STATUS_CFCORR       (0x00400000)
#define ACE_STATUS_CFERR        (0x00800000)

#define ACE_ERROR (0x08)
#define ACE_CFGLBA (0x0c)
#define ACE_MPULBA (0x10)

#define ACE_SECCNTCMD (0x14)
#define ACE_SECCNTCMD_RESET      (0x0100)
#define ACE_SECCNTCMD_IDENTIFY   (0x0200)
#define ACE_SECCNTCMD_READ_DATA  (0x0300)
#define ACE_SECCNTCMD_WRITE_DATA (0x0400)
#define ACE_SECCNTCMD_ABORT      (0x0600)

#define ACE_VERSION (0x16)
#define ACE_VERSION_REVISION_MASK (0x00FF)
#define ACE_VERSION_MINOR_MASK    (0x0F00)
#define ACE_VERSION_MAJOR_MASK    (0xF000)

#define ACE_CTRL (0x18)
#define ACE_CTRL_FORCELOCKREQ   (0x0001)
#define ACE_CTRL_LOCKREQ        (0x0002)
#define ACE_CTRL_FORCECFGADDR   (0x0004)
#define ACE_CTRL_FORCECFGMODE   (0x0008)
#define ACE_CTRL_CFGMODE        (0x0010)
#define ACE_CTRL_CFGSTART       (0x0020)
#define ACE_CTRL_CFGSEL         (0x0040)
#define ACE_CTRL_CFGRESET       (0x0080)
#define ACE_CTRL_DATABUFRDYIRQ  (0x0100)
#define ACE_CTRL_ERRORIRQ       (0x0200)
#define ACE_CTRL_CFGDONEIRQ     (0x0400)
#define ACE_CTRL_RESETIRQ       (0x0800)
#define ACE_CTRL_CFGPROG        (0x1000)
#define ACE_CTRL_CFGADDR_MASK   (0xe000)

#define ACE_FATSTAT (0x1c)

#define ACE_NUM_MINORS 16
#define ACE_SECTOR_SIZE (512)
#define ACE_FIFO_SIZE (32)
#define ACE_BUF_PER_SECTOR (ACE_SECTOR_SIZE / ACE_FIFO_SIZE)

#define ACE_BUS_WIDTH_8  0
#define ACE_BUS_WIDTH_16 1

struct ace_reg_ops;

struct ace_device {
        /* driver state data */
        int id;
        int media_change;
        int users;
        struct list_head list;

        /* finite state machine data */
        struct tasklet_struct fsm_tasklet;
        uint fsm_task;          /* Current activity (ACE_TASK_*) */
        uint fsm_state;         /* Current state (ACE_FSM_STATE_*) */
        uint fsm_continue_flag; /* cleared to exit FSM mainloop */
        uint fsm_iter_num;
        struct timer_list stall_timer;

        /* Transfer state/result, use for both id and block request */
        struct request *req;    /* request being processed */
        void *data_ptr;         /* pointer to I/O buffer */
        int data_count;         /* number of buffers remaining */
        int data_result;        /* Result of transfer; 0 := success */

        int id_req_count;       /* count of id requests */
        int id_result;
        struct completion id_completion;        /* used when id req finishes */
        int in_irq;

        /* Details of hardware device */
        unsigned long physaddr;
        void __iomem *baseaddr;
        int irq;
        int bus_width;          /* 0 := 8 bit; 1 := 16 bit */
        struct ace_reg_ops *reg_ops;
        int lock_count;

        /* Block device data structures */
        spinlock_t lock;
        struct device *dev;
        struct request_queue *queue;
        struct gendisk *gd;

        /* Inserted CF card parameters */
        struct hd_driveid cf_id;
};

static int ace_major;

/* ---------------------------------------------------------------------
 * Low level register access
 */

struct ace_reg_ops {
        u16(*in) (struct ace_device * ace, int reg);
        void (*out) (struct ace_device * ace, int reg, u16 val);
        void (*datain) (struct ace_device * ace);
        void (*dataout) (struct ace_device * ace);
};

/* 8 Bit bus width */
static u16 ace_in_8(struct ace_device *ace, int reg)
{
        void __iomem *r = ace->baseaddr + reg;
        return in_8(r) | (in_8(r + 1) << 8);
}

static void ace_out_8(struct ace_device *ace, int reg, u16 val)
{
        void __iomem *r = ace->baseaddr + reg;
        out_8(r, val);
        out_8(r + 1, val >> 8);
}

static void ace_datain_8(struct ace_device *ace)
{
        void __iomem *r = ace->baseaddr + 0x40;
        u8 *dst = ace->data_ptr;
        int i = ACE_FIFO_SIZE;
        while (i--)
                *dst++ = in_8(r++);
        ace->data_ptr = dst;
}

static void ace_dataout_8(struct ace_device *ace)
{
        void __iomem *r = ace->baseaddr + 0x40;
        u8 *src = ace->data_ptr;
        int i = ACE_FIFO_SIZE;
        while (i--)
                out_8(r++, *src++);
        ace->data_ptr = src;
}

static struct ace_reg_ops ace_reg_8_ops = {
        .in = ace_in_8,
        .out = ace_out_8,
        .datain = ace_datain_8,
        .dataout = ace_dataout_8,
};

/* 16 bit big endian bus attachment */
static u16 ace_in_be16(struct ace_device *ace, int reg)
{
        return in_be16(ace->baseaddr + reg);
}

static void ace_out_be16(struct ace_device *ace, int reg, u16 val)
{
        out_be16(ace->baseaddr + reg, val);
}

static void ace_datain_be16(struct ace_device *ace)
{
        int i = ACE_FIFO_SIZE / 2;
        u16 *dst = ace->data_ptr;
        while (i--)
                *dst++ = in_le16(ace->baseaddr + 0x40);
        ace->data_ptr = dst;
}

static void ace_dataout_be16(struct ace_device *ace)
{
        int i = ACE_FIFO_SIZE / 2;
        u16 *src = ace->data_ptr;
        while (i--)
                out_le16(ace->baseaddr + 0x40, *src++);
        ace->data_ptr = src;
}

/* 16 bit little endian bus attachment */
static u16 ace_in_le16(struct ace_device *ace, int reg)
{
        return in_le16(ace->baseaddr + reg);
}

static void ace_out_le16(struct ace_device *ace, int reg, u16 val)
{
        out_le16(ace->baseaddr + reg, val);
}

static void ace_datain_le16(struct ace_device *ace)
{
        int i = ACE_FIFO_SIZE / 2;
        u16 *dst = ace->data_ptr;
        while (i--)
                *dst++ = in_be16(ace->baseaddr + 0x40);
        ace->data_ptr = dst;
}

static void ace_dataout_le16(struct ace_device *ace)
{
        int i = ACE_FIFO_SIZE / 2;
        u16 *src = ace->data_ptr;
        while (i--)
                out_be16(ace->baseaddr + 0x40, *src++);
        ace->data_ptr = src;
}

static struct ace_reg_ops ace_reg_be16_ops = {
        .in = ace_in_be16,
        .out = ace_out_be16,
        .datain = ace_datain_be16,
        .dataout = ace_dataout_be16,
};

static struct ace_reg_ops ace_reg_le16_ops = {
        .in = ace_in_le16,
        .out = ace_out_le16,
        .datain = ace_datain_le16,
        .dataout = ace_dataout_le16,
};

static inline u16 ace_in(struct ace_device *ace, int reg)
{
        return ace->reg_ops->in(ace, reg);
}

static inline u32 ace_in32(struct ace_device *ace, int reg)
{
        return ace_in(ace, reg) | (ace_in(ace, reg + 2) << 16);
}

static inline void ace_out(struct ace_device *ace, int reg, u16 val)
{
        ace->reg_ops->out(ace, reg, val);
}

static inline void ace_out32(struct ace_device *ace, int reg, u32 val)
{
        ace_out(ace, reg, val);
        ace_out(ace, reg + 2, val >> 16);
}

/* ---------------------------------------------------------------------
 * Debug support functions
 */

#if defined(DEBUG)
static void ace_dump_mem(void *base, int len)
{
        const char *ptr = base;
        int i, j;

        for (i = 0; i < len; i += 16) {
                printk(KERN_INFO "%.8x:", i);
                for (j = 0; j < 16; j++) {
                        if (!(j % 4))
                                printk(" ");
                        printk("%.2x", ptr[i + j]);
                }
                printk(" ");
                for (j = 0; j < 16; j++)
                        printk("%c", isprint(ptr[i + j]) ? ptr[i + j] : '.');
                printk("\n");
        }
}
#else
static inline void ace_dump_mem(void *base, int len)
{
}
#endif

static void ace_dump_regs(struct ace_device *ace)
{
        dev_info(ace->dev, "    ctrl:  %.8x  seccnt/cmd: %.4x      ver:%.4x\n"
                 KERN_INFO "    status:%.8x  mpu_lba:%.8x  busmode:%4x\n"
                 KERN_INFO "    error: %.8x  cfg_lba:%.8x  fatstat:%.4x\n",
                 ace_in32(ace, ACE_CTRL),
                 ace_in(ace, ACE_SECCNTCMD),
                 ace_in(ace, ACE_VERSION),
                 ace_in32(ace, ACE_STATUS),
                 ace_in32(ace, ACE_MPULBA),
                 ace_in(ace, ACE_BUSMODE),
                 ace_in32(ace, ACE_ERROR),
                 ace_in32(ace, ACE_CFGLBA), ace_in(ace, ACE_FATSTAT));
}

void ace_fix_driveid(struct hd_driveid *id)
{
#if defined(__BIG_ENDIAN)
        u16 *buf = (void *)id;
        int i;

        /* All half words have wrong byte order; swap the bytes */
        for (i = 0; i < sizeof(struct hd_driveid); i += 2, buf++)
                *buf = le16_to_cpu(*buf);

        /* Some of the data values are 32bit; swap the half words  */
        id->lba_capacity = ((id->lba_capacity >> 16) & 0x0000FFFF) |
            ((id->lba_capacity << 16) & 0xFFFF0000);
        id->spg = ((id->spg >> 16) & 0x0000FFFF) |
            ((id->spg << 16) & 0xFFFF0000);
#endif
}

/* ---------------------------------------------------------------------
 * Finite State Machine (FSM) implementation
 */

/* FSM tasks; used to direct state transitions */
#define ACE_TASK_IDLE      0
#define ACE_TASK_IDENTIFY  1
#define ACE_TASK_READ      2
#define ACE_TASK_WRITE     3
#define ACE_FSM_NUM_TASKS  4

/* FSM state definitions */
#define ACE_FSM_STATE_IDLE               0
#define ACE_FSM_STATE_REQ_LOCK           1
#define ACE_FSM_STATE_WAIT_LOCK          2
#define ACE_FSM_STATE_WAIT_CFREADY       3
#define ACE_FSM_STATE_IDENTIFY_PREPARE   4
#define ACE_FSM_STATE_IDENTIFY_TRANSFER  5
#define ACE_FSM_STATE_IDENTIFY_COMPLETE  6
#define ACE_FSM_STATE_REQ_PREPARE        7
#define ACE_FSM_STATE_REQ_TRANSFER       8
#define ACE_FSM_STATE_REQ_COMPLETE       9
#define ACE_FSM_STATE_ERROR             10
#define ACE_FSM_NUM_STATES              11

/* Set flag to exit FSM loop and reschedule tasklet */
static inline void ace_fsm_yield(struct ace_device *ace)
{
        dev_dbg(ace->dev, "ace_fsm_yield()\n");
        tasklet_schedule(&ace->fsm_tasklet);
        ace->fsm_continue_flag = 0;
}

/* Set flag to exit FSM loop and wait for IRQ to reschedule tasklet */
static inline void ace_fsm_yieldirq(struct ace_device *ace)
{
        dev_dbg(ace->dev, "ace_fsm_yieldirq()\n");

        if (ace->irq == NO_IRQ)
                /* No IRQ assigned, so need to poll */
                tasklet_schedule(&ace->fsm_tasklet);
        ace->fsm_continue_flag = 0;
}

/* Get the next read/write request; ending requests that we don't handle */
struct request *ace_get_next_request(struct request_queue * q)
{
        struct request *req;

        while ((req = elv_next_request(q)) != NULL) {
                if (blk_fs_request(req))
                        break;
                end_request(req, 0);
        }
        return req;
}

static void ace_fsm_dostate(struct ace_device *ace)
{
        struct request *req;
        u32 status;
        u16 val;
        int count;

#if defined(DEBUG)
        dev_dbg(ace->dev, "fsm_state=%i, id_req_count=%i\n",
                ace->fsm_state, ace->id_req_count);
#endif

        switch (ace->fsm_state) {
        case ACE_FSM_STATE_IDLE:
                /* See if there is anything to do */
                if (ace->id_req_count || ace_get_next_request(ace->queue)) {
                        ace->fsm_iter_num++;
                        ace->fsm_state = ACE_FSM_STATE_REQ_LOCK;
                        mod_timer(&ace->stall_timer, jiffies + HZ);
                        if (!timer_pending(&ace->stall_timer))
                                add_timer(&ace->stall_timer);
                        break;
                }
                del_timer(&ace->stall_timer);
                ace->fsm_continue_flag = 0;
                break;

        case ACE_FSM_STATE_REQ_LOCK:
                if (ace_in(ace, ACE_STATUS) & ACE_STATUS_MPULOCK) {
                        /* Already have the lock, jump to next state */
                        ace->fsm_state = ACE_FSM_STATE_WAIT_CFREADY;
                        break;
                }

                /* Request the lock */
                val = ace_in(ace, ACE_CTRL);
                ace_out(ace, ACE_CTRL, val | ACE_CTRL_LOCKREQ);
                ace->fsm_state = ACE_FSM_STATE_WAIT_LOCK;
                break;

        case ACE_FSM_STATE_WAIT_LOCK:
                if (ace_in(ace, ACE_STATUS) & ACE_STATUS_MPULOCK) {
                        /* got the lock; move to next state */
                        ace->fsm_state = ACE_FSM_STATE_WAIT_CFREADY;
                        break;
                }

                /* wait a bit for the lock */
                ace_fsm_yield(ace);
                break;

        case ACE_FSM_STATE_WAIT_CFREADY:
                status = ace_in32(ace, ACE_STATUS);
                if (!(status & ACE_STATUS_RDYFORCFCMD) ||
                    (status & ACE_STATUS_CFBSY)) {
                        /* CF card isn't ready; it needs to be polled */
                        ace_fsm_yield(ace);
                        break;
                }

                /* Device is ready for command; determine what to do next */
                if (ace->id_req_count)
                        ace->fsm_state = ACE_FSM_STATE_IDENTIFY_PREPARE;
                else
                        ace->fsm_state = ACE_FSM_STATE_REQ_PREPARE;
                break;

        case ACE_FSM_STATE_IDENTIFY_PREPARE:
                /* Send identify command */
                ace->fsm_task = ACE_TASK_IDENTIFY;
                ace->data_ptr = &ace->cf_id;
                ace->data_count = ACE_BUF_PER_SECTOR;
                ace_out(ace, ACE_SECCNTCMD, ACE_SECCNTCMD_IDENTIFY);

                /* As per datasheet, put config controller in reset */
                val = ace_in(ace, ACE_CTRL);
                ace_out(ace, ACE_CTRL, val | ACE_CTRL_CFGRESET);

                /* irq handler takes over from this point; wait for the
                 * transfer to complete */
                ace->fsm_state = ACE_FSM_STATE_IDENTIFY_TRANSFER;
                ace_fsm_yieldirq(ace);
                break;

        case ACE_FSM_STATE_IDENTIFY_TRANSFER:
                /* Check that the sysace is ready to receive data */
                status = ace_in32(ace, ACE_STATUS);
                if (status & ACE_STATUS_CFBSY) {
                        dev_dbg(ace->dev, "CFBSY set; t=%i iter=%i dc=%i\n",
                                ace->fsm_task, ace->fsm_iter_num,
                                ace->data_count);
                        ace_fsm_yield(ace);
                        break;
                }
                if (!(status & ACE_STATUS_DATABUFRDY)) {
                        ace_fsm_yield(ace);
                        break;
                }

                /* Transfer the next buffer */
                ace->reg_ops->datain(ace);
                ace->data_count--;

                /* If there are still buffers to be transfers; jump out here */
                if (ace->data_count != 0) {
                        ace_fsm_yieldirq(ace);
                        break;
                }

                /* transfer finished; kick state machine */
                dev_dbg(ace->dev, "identify finished\n");
                ace->fsm_state = ACE_FSM_STATE_IDENTIFY_COMPLETE;
                break;

        case ACE_FSM_STATE_IDENTIFY_COMPLETE:
                ace_fix_driveid(&ace->cf_id);
                ace_dump_mem(&ace->cf_id, 512); /* Debug: Dump out disk ID */

                if (ace->data_result) {
                        /* Error occured, disable the disk */
                        ace->media_change = 1;
                        set_capacity(ace->gd, 0);
                        dev_err(ace->dev, "error fetching CF id (%i)\n",
                                ace->data_result);
                } else {
                        ace->media_change = 0;

                        /* Record disk parameters */
                        set_capacity(ace->gd, ace->cf_id.lba_capacity);
                        dev_info(ace->dev, "capacity: %i sectors\n",
                                 ace->cf_id.lba_capacity);
                }

                /* We're done, drop to IDLE state and notify waiters */
                ace->fsm_state = ACE_FSM_STATE_IDLE;
                ace->id_result = ace->data_result;
                while (ace->id_req_count) {
                        complete(&ace->id_completion);
                        ace->id_req_count--;
                }
                break;

        case ACE_FSM_STATE_REQ_PREPARE:
                req = ace_get_next_request(ace->queue);
                if (!req) {
                        ace->fsm_state = ACE_FSM_STATE_IDLE;
                        break;
                }

                /* Okay, it's a data request, set it up for transfer */
                dev_dbg(ace->dev,
                        "request: sec=%lx hcnt=%lx, ccnt=%x, dir=%i\n",
                        req->sector, req->hard_nr_sectors,
                        req->current_nr_sectors, rq_data_dir(req));

                ace->req = req;
                ace->data_ptr = req->buffer;
                ace->data_count = req->current_nr_sectors * ACE_BUF_PER_SECTOR;
                ace_out32(ace, ACE_MPULBA, req->sector & 0x0FFFFFFF);

                count = req->hard_nr_sectors;
                if (rq_data_dir(req)) {
                        /* Kick off write request */
                        dev_dbg(ace->dev, "write data\n");
                        ace->fsm_task = ACE_TASK_WRITE;
                        ace_out(ace, ACE_SECCNTCMD,
                                count | ACE_SECCNTCMD_WRITE_DATA);
                } else {
                        /* Kick off read request */
                        dev_dbg(ace->dev, "read data\n");
                        ace->fsm_task = ACE_TASK_READ;
                        ace_out(ace, ACE_SECCNTCMD,
                                count | ACE_SECCNTCMD_READ_DATA);
                }

                /* As per datasheet, put config controller in reset */
                val = ace_in(ace, ACE_CTRL);
                ace_out(ace, ACE_CTRL, val | ACE_CTRL_CFGRESET);

                /* Move to the transfer state.  The systemace will raise
                 * an interrupt once there is something to do
                 */
                ace->fsm_state = ACE_FSM_STATE_REQ_TRANSFER;
                if (ace->fsm_task == ACE_TASK_READ)
                        ace_fsm_yieldirq(ace);  /* wait for data ready */
                break;

        case ACE_FSM_STATE_REQ_TRANSFER:
                /* Check that the sysace is ready to receive data */
                status = ace_in32(ace, ACE_STATUS);
                if (status & ACE_STATUS_CFBSY) {
                        dev_dbg(ace->dev,
                                "CFBSY set; t=%i iter=%i c=%i dc=%i irq=%i\n",
                                ace->fsm_task, ace->fsm_iter_num,
                                ace->req->current_nr_sectors * 16,
                                ace->data_count, ace->in_irq);
                        ace_fsm_yield(ace);     /* need to poll CFBSY bit */
                        break;
                }
                if (!(status & ACE_STATUS_DATABUFRDY)) {
                        dev_dbg(ace->dev,
                                "DATABUF not set; t=%i iter=%i c=%i dc=%i irq=%i\n",
                                ace->fsm_task, ace->fsm_iter_num,
                                ace->req->current_nr_sectors * 16,
                                ace->data_count, ace->in_irq);
                        ace_fsm_yieldirq(ace);
                        break;
                }

                /* Transfer the next buffer */
                if (ace->fsm_task == ACE_TASK_WRITE)
                        ace->reg_ops->dataout(ace);
                else
                        ace->reg_ops->datain(ace);
                ace->data_count--;

                /* If there are still buffers to be transfers; jump out here */
                if (ace->data_count != 0) {
                        ace_fsm_yieldirq(ace);
                        break;
                }

                /* bio finished; is there another one? */
                if (__blk_end_request(ace->req, 0,
                                        blk_rq_cur_bytes(ace->req))) {
                        /* dev_dbg(ace->dev, "next block; h=%li c=%i\n",
                         *      ace->req->hard_nr_sectors,
                         *      ace->req->current_nr_sectors);
                         */
                        ace->data_ptr = ace->req->buffer;
                        ace->data_count = ace->req->current_nr_sectors * 16;
                        ace_fsm_yieldirq(ace);
                        break;
                }

                ace->fsm_state = ACE_FSM_STATE_REQ_COMPLETE;
                break;

        case ACE_FSM_STATE_REQ_COMPLETE:
                ace->req = NULL;

                /* Finished request; go to idle state */
                ace->fsm_state = ACE_FSM_STATE_IDLE;
                break;

        default:
                ace->fsm_state = ACE_FSM_STATE_IDLE;
                break;
        }
}

static void ace_fsm_tasklet(unsigned long data)
{
        struct ace_device *ace = (void *)data;
        unsigned long flags;

        spin_lock_irqsave(&ace->lock, flags);

        /* Loop over state machine until told to stop */
        ace->fsm_continue_flag = 1;
        while (ace->fsm_continue_flag)
                ace_fsm_dostate(ace);

        spin_unlock_irqrestore(&ace->lock, flags);
}

static void ace_stall_timer(unsigned long data)
{
        struct ace_device *ace = (void *)data;
        unsigned long flags;

        dev_warn(ace->dev,
                 "kicking stalled fsm; state=%i task=%i iter=%i dc=%i\n",
                 ace->fsm_state, ace->fsm_task, ace->fsm_iter_num,
                 ace->data_count);
        spin_lock_irqsave(&ace->lock, flags);

        /* Rearm the stall timer *before* entering FSM (which may then
         * delete the timer) */
        mod_timer(&ace->stall_timer, jiffies + HZ);

        /* Loop over state machine until told to stop */
        ace->fsm_continue_flag = 1;
        while (ace->fsm_continue_flag)
                ace_fsm_dostate(ace);

        spin_unlock_irqrestore(&ace->lock, flags);
}

/* ---------------------------------------------------------------------
 * Interrupt handling routines
 */
static int ace_interrupt_checkstate(struct ace_device *ace)
{
        u32 sreg = ace_in32(ace, ACE_STATUS);
        u16 creg = ace_in(ace, ACE_CTRL);

        /* Check for error occurance */
        if ((sreg & (ACE_STATUS_CFGERROR | ACE_STATUS_CFCERROR)) &&
            (creg & ACE_CTRL_ERRORIRQ)) {
                dev_err(ace->dev, "transfer failure\n");
                ace_dump_regs(ace);
                return -EIO;
        }

        return 0;
}

static irqreturn_t ace_interrupt(int irq, void *dev_id)
{
        u16 creg;
        struct ace_device *ace = dev_id;

        /* be safe and get the lock */
        spin_lock(&ace->lock);
        ace->in_irq = 1;

        /* clear the interrupt */
        creg = ace_in(ace, ACE_CTRL);
        ace_out(ace, ACE_CTRL, creg | ACE_CTRL_RESETIRQ);
        ace_out(ace, ACE_CTRL, creg);

        /* check for IO failures */
        if (ace_interrupt_checkstate(ace))
                ace->data_result = -EIO;

        if (ace->fsm_task == 0) {
                dev_err(ace->dev,
                        "spurious irq; stat=%.8x ctrl=%.8x cmd=%.4x\n",
                        ace_in32(ace, ACE_STATUS), ace_in32(ace, ACE_CTRL),
                        ace_in(ace, ACE_SECCNTCMD));
                dev_err(ace->dev, "fsm_task=%i fsm_state=%i data_count=%i\n",
                        ace->fsm_task, ace->fsm_state, ace->data_count);
        }

        /* Loop over state machine until told to stop */
        ace->fsm_continue_flag = 1;
        while (ace->fsm_continue_flag)
                ace_fsm_dostate(ace);

        /* done with interrupt; drop the lock */
        ace->in_irq = 0;
        spin_unlock(&ace->lock);

        return IRQ_HANDLED;
}

/* ---------------------------------------------------------------------
 * Block ops
 */
static void ace_request(struct request_queue * q)
{
        struct request *req;
        struct ace_device *ace;

        req = ace_get_next_request(q);

        if (req) {
                ace = req->rq_disk->private_data;
                tasklet_schedule(&ace->fsm_tasklet);
        }
}

static int ace_media_changed(struct gendisk *gd)
{
        struct ace_device *ace = gd->private_data;
        dev_dbg(ace->dev, "ace_media_changed(): %i\n", ace->media_change);

        return ace->media_change;
}

static int ace_revalidate_disk(struct gendisk *gd)
{
        struct ace_device *ace = gd->private_data;
        unsigned long flags;

        dev_dbg(ace->dev, "ace_revalidate_disk()\n");

        if (ace->media_change) {
                dev_dbg(ace->dev, "requesting cf id and scheduling tasklet\n");

                spin_lock_irqsave(&ace->lock, flags);
                ace->id_req_count++;
                spin_unlock_irqrestore(&ace->lock, flags);

                tasklet_schedule(&ace->fsm_tasklet);
                wait_for_completion(&ace->id_completion);
        }

        dev_dbg(ace->dev, "revalidate complete\n");
        return ace->id_result;
}

static int ace_open(struct inode *inode, struct file *filp)
{
        struct ace_device *ace = inode->i_bdev->bd_disk->private_data;
        unsigned long flags;

        dev_dbg(ace->dev, "ace_open() users=%i\n", ace->users + 1);

        filp->private_data = ace;
        spin_lock_irqsave(&ace->lock, flags);
        ace->users++;
        spin_unlock_irqrestore(&ace->lock, flags);

        check_disk_change(inode->i_bdev);
        return 0;
}

static int ace_release(struct inode *inode, struct file *filp)
{
        struct ace_device *ace = inode->i_bdev->bd_disk->private_data;
        unsigned long flags;
        u16 val;

        dev_dbg(ace->dev, "ace_release() users=%i\n", ace->users - 1);

        spin_lock_irqsave(&ace->lock, flags);
        ace->users--;
        if (ace->users == 0) {
                val = ace_in(ace, ACE_CTRL);
                ace_out(ace, ACE_CTRL, val & ~ACE_CTRL_LOCKREQ);
        }
        spin_unlock_irqrestore(&ace->lock, flags);
        return 0;
}

static int ace_getgeo(struct block_device *bdev, struct hd_geometry *geo)
{
        struct ace_device *ace = bdev->bd_disk->private_data;

        dev_dbg(ace->dev, "ace_getgeo()\n");

        geo->heads = ace->cf_id.heads;
        geo->sectors = ace->cf_id.sectors;
        geo->cylinders = ace->cf_id.cyls;

        return 0;
}

static struct block_device_operations ace_fops = {
        .owner = THIS_MODULE,
        .open = ace_open,
        .release = ace_release,
        .media_changed = ace_media_changed,
        .revalidate_disk = ace_revalidate_disk,
        .getgeo = ace_getgeo,
};

/* --------------------------------------------------------------------
 * SystemACE device setup/teardown code
 */
static int __devinit ace_setup(struct ace_device *ace)
{
        u16 version;
        u16 val;
        int rc;

        dev_dbg(ace->dev, "ace_setup(ace=0x%p)\n", ace);
        dev_dbg(ace->dev, "physaddr=0x%lx irq=%i\n", ace->physaddr, ace->irq);

        spin_lock_init(&ace->lock);
        init_completion(&ace->id_completion);

        /*
         * Map the device
         */
        ace->baseaddr = ioremap(ace->physaddr, 0x80);
        if (!ace->baseaddr)
                goto err_ioremap;

        /*
         * Initialize the state machine tasklet and stall timer
         */
        tasklet_init(&ace->fsm_tasklet, ace_fsm_tasklet, (unsigned long)ace);
        setup_timer(&ace->stall_timer, ace_stall_timer, (unsigned long)ace);

        /*
         * Initialize the request queue
         */
        ace->queue = blk_init_queue(ace_request, &ace->lock);
        if (ace->queue == NULL)
                goto err_blk_initq;
        blk_queue_hardsect_size(ace->queue, 512);

        /*
         * Allocate and initialize GD structure
         */
        ace->gd = alloc_disk(ACE_NUM_MINORS);
        if (!ace->gd)
                goto err_alloc_disk;

        ace->gd->major = ace_major;
        ace->gd->first_minor = ace->id * ACE_NUM_MINORS;
        ace->gd->fops = &ace_fops;
        ace->gd->queue = ace->queue;
        ace->gd->private_data = ace;
        snprintf(ace->gd->disk_name, 32, "xs%c", ace->id + 'a');

        /* set bus width */
        if (ace->bus_width == ACE_BUS_WIDTH_16) {
                /* 0x0101 should work regardless of endianess */
                ace_out_le16(ace, ACE_BUSMODE, 0x0101);

                /* read it back to determine endianess */
                if (ace_in_le16(ace, ACE_BUSMODE) == 0x0001)
                        ace->reg_ops = &ace_reg_le16_ops;
                else
                        ace->reg_ops = &ace_reg_be16_ops;
        } else {
                ace_out_8(ace, ACE_BUSMODE, 0x00);
                ace->reg_ops = &ace_reg_8_ops;
        }

        /* Make sure version register is sane */
        version = ace_in(ace, ACE_VERSION);
        if ((version == 0) || (version == 0xFFFF))
                goto err_read;

        /* Put sysace in a sane state by clearing most control reg bits */
        ace_out(ace, ACE_CTRL, ACE_CTRL_FORCECFGMODE |
                ACE_CTRL_DATABUFRDYIRQ | ACE_CTRL_ERRORIRQ);

        /* Now we can hook up the irq handler */
        if (ace->irq != NO_IRQ) {
                rc = request_irq(ace->irq, ace_interrupt, 0, "systemace", ace);
                if (rc) {
                        /* Failure - fall back to polled mode */
                        dev_err(ace->dev, "request_irq failed\n");
                        ace->irq = NO_IRQ;
                }
        }

        /* Enable interrupts */
        val = ace_in(ace, ACE_CTRL);
        val |= ACE_CTRL_DATABUFRDYIRQ | ACE_CTRL_ERRORIRQ;
        ace_out(ace, ACE_CTRL, val);

        /* Print the identification */
        dev_info(ace->dev, "Xilinx SystemACE revision %i.%i.%i\n",
                 (version >> 12) & 0xf, (version >> 8) & 0x0f, version & 0xff);
        dev_dbg(ace->dev, "physaddr 0x%lx, mapped to 0x%p, irq=%i\n",
                ace->physaddr, ace->baseaddr, ace->irq);

        ace->media_change = 1;
        ace_revalidate_disk(ace->gd);

        /* Make the sysace device 'live' */
        add_disk(ace->gd);

        return 0;

err_read:
        put_disk(ace->gd);
err_alloc_disk:
        blk_cleanup_queue(ace->queue);
err_blk_initq:
        iounmap(ace->baseaddr);
err_ioremap:
        dev_info(ace->dev, "xsysace: error initializing device at 0x%lx\n",
               ace->physaddr);
        return -ENOMEM;
}

static void __devexit ace_teardown(struct ace_device *ace)
{
        if (ace->gd) {
                del_gendisk(ace->gd);
                put_disk(ace->gd);
        }

        if (ace->queue)
                blk_cleanup_queue(ace->queue);

        tasklet_kill(&ace->fsm_tasklet);

        if (ace->irq != NO_IRQ)
                free_irq(ace->irq, ace);

        iounmap(ace->baseaddr);
}

static int __devinit
ace_alloc(struct device *dev, int id, unsigned long physaddr,
          int irq, int bus_width)
{
        struct ace_device *ace;
        int rc;
        dev_dbg(dev, "ace_alloc(%p)\n", dev);

        if (!physaddr) {
                rc = -ENODEV;
                goto err_noreg;
        }

        /* Allocate and initialize the ace device structure */
        ace = kzalloc(sizeof(struct ace_device), GFP_KERNEL);
        if (!ace) {
                rc = -ENOMEM;
                goto err_alloc;
        }

        ace->dev = dev;
        ace->id = id;
        ace->physaddr = physaddr;
        ace->irq = irq;
        ace->bus_width = bus_width;

        /* Call the setup code */
        rc = ace_setup(ace);
        if (rc)
                goto err_setup;

        dev_set_drvdata(dev, ace);
        return 0;

err_setup:
        dev_set_drvdata(dev, NULL);
        kfree(ace);
err_alloc:
err_noreg:
        dev_err(dev, "could not initialize device, err=%i\n", rc);
        return rc;
}

static void __devexit ace_free(struct device *dev)
{
        struct ace_device *ace = dev_get_drvdata(dev);
        dev_dbg(dev, "ace_free(%p)\n", dev);

        if (ace) {
                ace_teardown(ace);
                dev_set_drvdata(dev, NULL);
                kfree(ace);
        }
}

/* ---------------------------------------------------------------------
 * Platform Bus Support
 */

static int __devinit ace_probe(struct platform_device *dev)
{
        unsigned long physaddr = 0;
        int bus_width = ACE_BUS_WIDTH_16; /* FIXME: should not be hard coded */
        int id = dev->id;
        int irq = NO_IRQ;
        int i;

        dev_dbg(&dev->dev, "ace_probe(%p)\n", dev);

        for (i = 0; i < dev->num_resources; i++) {
                if (dev->resource[i].flags & IORESOURCE_MEM)
                        physaddr = dev->resource[i].start;
                if (dev->resource[i].flags & IORESOURCE_IRQ)
                        irq = dev->resource[i].start;
        }

        /* Call the bus-independant setup code */
        return ace_alloc(&dev->dev, id, physaddr, irq, bus_width);
}

/*
 * Platform bus remove() method
 */
static int __devexit ace_remove(struct platform_device *dev)
{
        ace_free(&dev->dev);
        return 0;
}

static struct platform_driver ace_platform_driver = {
        .probe = ace_probe,
        .remove = __devexit_p(ace_remove),
        .driver = {
                .owner = THIS_MODULE,
                .name = "xsysace",
        },
};

/* ---------------------------------------------------------------------
 * OF_Platform Bus Support
 */

#if defined(CONFIG_OF)
static int __devinit
ace_of_probe(struct of_device *op, const struct of_device_id *match)
{
        struct resource res;
        unsigned long physaddr;
        const u32 *id;
        int irq, bus_width, rc;

        dev_dbg(&op->dev, "ace_of_probe(%p, %p)\n", op, match);

        /* device id */
        id = of_get_property(op->node, "port-number", NULL);

        /* physaddr */
        rc = of_address_to_resource(op->node, 0, &res);
        if (rc) {
                dev_err(&op->dev, "invalid address\n");
                return rc;
        }
        physaddr = res.start;

        /* irq */
        irq = irq_of_parse_and_map(op->node, 0);

        /* bus width */
        bus_width = ACE_BUS_WIDTH_16;
        if (of_find_property(op->node, "8-bit", NULL))
                bus_width = ACE_BUS_WIDTH_8;

        /* Call the bus-independant setup code */
        return ace_alloc(&op->dev, id ? *id : 0, physaddr, irq, bus_width);
}

static int __devexit ace_of_remove(struct of_device *op)
{
        ace_free(&op->dev);
        return 0;
}

/* Match table for of_platform binding */
static struct of_device_id ace_of_match[] __devinitdata = {
        { .compatible = "xlnx,opb-sysace-1.00.b", },
        { .compatible = "xlnx,opb-sysace-1.00.c", },
        { .compatible = "xlnx,xps-sysace-1.00.a", },
        {},
};
MODULE_DEVICE_TABLE(of, ace_of_match);

static struct of_platform_driver ace_of_driver = {
        .owner = THIS_MODULE,
        .name = "xsysace",
        .match_table = ace_of_match,
        .probe = ace_of_probe,
        .remove = __devexit_p(ace_of_remove),
        .driver = {
                .name = "xsysace",
        },
};

/* Registration helpers to keep the number of #ifdefs to a minimum */
static inline int __init ace_of_register(void)
{
        pr_debug("xsysace: registering OF binding\n");
        return of_register_platform_driver(&ace_of_driver);
}

static inline void __exit ace_of_unregister(void)
{
        of_unregister_platform_driver(&ace_of_driver);
}
#else /* CONFIG_OF */
/* CONFIG_OF not enabled; do nothing helpers */
static inline int __init ace_of_register(void) { return 0; }
static inline void __exit ace_of_unregister(void) { }
#endif /* CONFIG_OF */

/* ---------------------------------------------------------------------
 * Module init/exit routines
 */
static int __init ace_init(void)
{
        int rc;

        ace_major = register_blkdev(ace_major, "xsysace");
        if (ace_major <= 0) {
                rc = -ENOMEM;
                goto err_blk;
        }

        rc = ace_of_register();
        if (rc)
                goto err_of;

        pr_debug("xsysace: registering platform binding\n");
        rc = platform_driver_register(&ace_platform_driver);
        if (rc)
                goto err_plat;

        pr_info("Xilinx SystemACE device driver, major=%i\n", ace_major);
        return 0;

err_plat:
        ace_of_unregister();
err_of:
        unregister_blkdev(ace_major, "xsysace");
err_blk:
        printk(KERN_ERR "xsysace: registration failed; err=%i\n", rc);
        return rc;
}

static void __exit ace_exit(void)
{
        pr_debug("Unregistering Xilinx SystemACE driver\n");
        platform_driver_unregister(&ace_platform_driver);
        ace_of_unregister();
        unregister_blkdev(ace_major, "xsysace");
}

module_init(ace_init);
module_exit(ace_exit);