sched: make early bootup sched_clock() use safer
[wrt350n-kernel.git] / include / asm-m68k / atafdreg.h
blobbbf80949fd9f29b743c241cef0b5417e020cabd2
1 #ifndef _LINUX_FDREG_H
2 #define _LINUX_FDREG_H
4 /*
5 ** WD1772 stuff
6 */
8 /* register codes */
10 #define FDCSELREG_STP (0x80) /* command/status register */
11 #define FDCSELREG_TRA (0x82) /* track register */
12 #define FDCSELREG_SEC (0x84) /* sector register */
13 #define FDCSELREG_DTA (0x86) /* data register */
15 /* register names for FDC_READ/WRITE macros */
17 #define FDCREG_CMD 0
18 #define FDCREG_STATUS 0
19 #define FDCREG_TRACK 2
20 #define FDCREG_SECTOR 4
21 #define FDCREG_DATA 6
23 /* command opcodes */
25 #define FDCCMD_RESTORE (0x00) /* - */
26 #define FDCCMD_SEEK (0x10) /* | */
27 #define FDCCMD_STEP (0x20) /* | TYP 1 Commands */
28 #define FDCCMD_STIN (0x40) /* | */
29 #define FDCCMD_STOT (0x60) /* - */
30 #define FDCCMD_RDSEC (0x80) /* - TYP 2 Commands */
31 #define FDCCMD_WRSEC (0xa0) /* - " */
32 #define FDCCMD_RDADR (0xc0) /* - */
33 #define FDCCMD_RDTRA (0xe0) /* | TYP 3 Commands */
34 #define FDCCMD_WRTRA (0xf0) /* - */
35 #define FDCCMD_FORCI (0xd0) /* - TYP 4 Command */
37 /* command modifier bits */
39 #define FDCCMDADD_SR6 (0x00) /* step rate settings */
40 #define FDCCMDADD_SR12 (0x01)
41 #define FDCCMDADD_SR2 (0x02)
42 #define FDCCMDADD_SR3 (0x03)
43 #define FDCCMDADD_V (0x04) /* verify */
44 #define FDCCMDADD_H (0x08) /* wait for spin-up */
45 #define FDCCMDADD_U (0x10) /* update track register */
46 #define FDCCMDADD_M (0x10) /* multiple sector access */
47 #define FDCCMDADD_E (0x04) /* head settling flag */
48 #define FDCCMDADD_P (0x02) /* precompensation off */
49 #define FDCCMDADD_A0 (0x01) /* DAM flag */
51 /* status register bits */
53 #define FDCSTAT_MOTORON (0x80) /* motor on */
54 #define FDCSTAT_WPROT (0x40) /* write protected (FDCCMD_WR*) */
55 #define FDCSTAT_SPINUP (0x20) /* motor speed stable (Type I) */
56 #define FDCSTAT_DELDAM (0x20) /* sector has deleted DAM (Type II+III) */
57 #define FDCSTAT_RECNF (0x10) /* record not found */
58 #define FDCSTAT_CRC (0x08) /* CRC error */
59 #define FDCSTAT_TR00 (0x04) /* Track 00 flag (Type I) */
60 #define FDCSTAT_LOST (0x04) /* Lost Data (Type II+III) */
61 #define FDCSTAT_IDX (0x02) /* Index status (Type I) */
62 #define FDCSTAT_DRQ (0x02) /* DRQ status (Type II+III) */
63 #define FDCSTAT_BUSY (0x01) /* FDC is busy */
66 /* PSG Port A Bit Nr 0 .. Side Sel .. 0 -> Side 1 1 -> Side 2 */
67 #define DSKSIDE (0x01)
69 #define DSKDRVNONE (0x06)
70 #define DSKDRV0 (0x02)
71 #define DSKDRV1 (0x04)
73 /* step rates */
74 #define FDCSTEP_6 0x00
75 #define FDCSTEP_12 0x01
76 #define FDCSTEP_2 0x02
77 #define FDCSTEP_3 0x03
79 #endif