sched: make early bootup sched_clock() use safer
[wrt350n-kernel.git] / include / asm-mips / irqflags.h
blob881e8866501d5f2af6b09355227edc620c3ba5b4
1 /*
2 * This file is subject to the terms and conditions of the GNU General Public
3 * License. See the file "COPYING" in the main directory of this archive
4 * for more details.
6 * Copyright (C) 1994, 95, 96, 97, 98, 99, 2003 by Ralf Baechle
7 * Copyright (C) 1996 by Paul M. Antoine
8 * Copyright (C) 1999 Silicon Graphics
9 * Copyright (C) 2000 MIPS Technologies, Inc.
11 #ifndef _ASM_IRQFLAGS_H
12 #define _ASM_IRQFLAGS_H
14 #ifndef __ASSEMBLY__
16 #include <linux/compiler.h>
17 #include <asm/hazards.h>
19 __asm__(
20 " .macro raw_local_irq_enable \n"
21 " .set push \n"
22 " .set reorder \n"
23 " .set noat \n"
24 #ifdef CONFIG_MIPS_MT_SMTC
25 " mfc0 $1, $2, 1 # SMTC - clear TCStatus.IXMT \n"
26 " ori $1, 0x400 \n"
27 " xori $1, 0x400 \n"
28 " mtc0 $1, $2, 1 \n"
29 #elif defined(CONFIG_CPU_MIPSR2)
30 " ei \n"
31 #else
32 " mfc0 $1,$12 \n"
33 " ori $1,0x1f \n"
34 " xori $1,0x1e \n"
35 " mtc0 $1,$12 \n"
36 #endif
37 " irq_enable_hazard \n"
38 " .set pop \n"
39 " .endm");
41 static inline void raw_local_irq_enable(void)
43 __asm__ __volatile__(
44 "raw_local_irq_enable"
45 : /* no outputs */
46 : /* no inputs */
47 : "memory");
51 * For cli() we have to insert nops to make sure that the new value
52 * has actually arrived in the status register before the end of this
53 * macro.
54 * R4000/R4400 need three nops, the R4600 two nops and the R10000 needs
55 * no nops at all.
58 * For TX49, operating only IE bit is not enough.
60 * If mfc0 $12 follows store and the mfc0 is last instruction of a
61 * page and fetching the next instruction causes TLB miss, the result
62 * of the mfc0 might wrongly contain EXL bit.
64 * ERT-TX49H2-027, ERT-TX49H3-012, ERT-TX49HL3-006, ERT-TX49H4-008
66 * Workaround: mask EXL bit of the result or place a nop before mfc0.
68 __asm__(
69 " .macro raw_local_irq_disable\n"
70 " .set push \n"
71 " .set noat \n"
72 #ifdef CONFIG_MIPS_MT_SMTC
73 " mfc0 $1, $2, 1 \n"
74 " ori $1, 0x400 \n"
75 " .set noreorder \n"
76 " mtc0 $1, $2, 1 \n"
77 #elif defined(CONFIG_CPU_MIPSR2)
78 " di \n"
79 #else
80 " mfc0 $1,$12 \n"
81 " ori $1,0x1f \n"
82 " xori $1,0x1f \n"
83 " .set noreorder \n"
84 " mtc0 $1,$12 \n"
85 #endif
86 " irq_disable_hazard \n"
87 " .set pop \n"
88 " .endm \n");
90 static inline void raw_local_irq_disable(void)
92 __asm__ __volatile__(
93 "raw_local_irq_disable"
94 : /* no outputs */
95 : /* no inputs */
96 : "memory");
99 __asm__(
100 " .macro raw_local_save_flags flags \n"
101 " .set push \n"
102 " .set reorder \n"
103 #ifdef CONFIG_MIPS_MT_SMTC
104 " mfc0 \\flags, $2, 1 \n"
105 #else
106 " mfc0 \\flags, $12 \n"
107 #endif
108 " .set pop \n"
109 " .endm \n");
111 #define raw_local_save_flags(x) \
112 __asm__ __volatile__( \
113 "raw_local_save_flags %0" \
114 : "=r" (x))
116 __asm__(
117 " .macro raw_local_irq_save result \n"
118 " .set push \n"
119 " .set reorder \n"
120 " .set noat \n"
121 #ifdef CONFIG_MIPS_MT_SMTC
122 " mfc0 \\result, $2, 1 \n"
123 " ori $1, \\result, 0x400 \n"
124 " .set noreorder \n"
125 " mtc0 $1, $2, 1 \n"
126 " andi \\result, \\result, 0x400 \n"
127 #elif defined(CONFIG_CPU_MIPSR2)
128 " di \\result \n"
129 " andi \\result, 1 \n"
130 #else
131 " mfc0 \\result, $12 \n"
132 " ori $1, \\result, 0x1f \n"
133 " xori $1, 0x1f \n"
134 " .set noreorder \n"
135 " mtc0 $1, $12 \n"
136 #endif
137 " irq_disable_hazard \n"
138 " .set pop \n"
139 " .endm \n");
141 #define raw_local_irq_save(x) \
142 __asm__ __volatile__( \
143 "raw_local_irq_save\t%0" \
144 : "=r" (x) \
145 : /* no inputs */ \
146 : "memory")
148 __asm__(
149 " .macro raw_local_irq_restore flags \n"
150 " .set push \n"
151 " .set noreorder \n"
152 " .set noat \n"
153 #ifdef CONFIG_MIPS_MT_SMTC
154 "mfc0 $1, $2, 1 \n"
155 "andi \\flags, 0x400 \n"
156 "ori $1, 0x400 \n"
157 "xori $1, 0x400 \n"
158 "or \\flags, $1 \n"
159 "mtc0 \\flags, $2, 1 \n"
160 #elif defined(CONFIG_CPU_MIPSR2) && defined(CONFIG_IRQ_CPU)
162 * Slow, but doesn't suffer from a relativly unlikely race
163 * condition we're having since days 1.
165 " beqz \\flags, 1f \n"
166 " di \n"
167 " ei \n"
168 "1: \n"
169 #elif defined(CONFIG_CPU_MIPSR2)
171 * Fast, dangerous. Life is fun, life is good.
173 " mfc0 $1, $12 \n"
174 " ins $1, \\flags, 0, 1 \n"
175 " mtc0 $1, $12 \n"
176 #else
177 " mfc0 $1, $12 \n"
178 " andi \\flags, 1 \n"
179 " ori $1, 0x1f \n"
180 " xori $1, 0x1f \n"
181 " or \\flags, $1 \n"
182 " mtc0 \\flags, $12 \n"
183 #endif
184 " irq_disable_hazard \n"
185 " .set pop \n"
186 " .endm \n");
188 extern void smtc_ipi_replay(void);
190 static inline void raw_local_irq_restore(unsigned long flags)
192 unsigned long __tmp1;
194 #ifdef CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY
196 * CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY does prompt replay of deferred
197 * IPIs, at the cost of branch and call overhead on each
198 * local_irq_restore()
200 if (unlikely(!(flags & 0x0400)))
201 smtc_ipi_replay();
202 #endif
204 __asm__ __volatile__(
205 "raw_local_irq_restore\t%0"
206 : "=r" (__tmp1)
207 : "0" (flags)
208 : "memory");
211 static inline int raw_irqs_disabled_flags(unsigned long flags)
213 #ifdef CONFIG_MIPS_MT_SMTC
215 * SMTC model uses TCStatus.IXMT to disable interrupts for a thread/CPU
217 return flags & 0x400;
218 #else
219 return !(flags & 1);
220 #endif
223 #endif
226 * Do the CPU's IRQ-state tracing from assembly code.
228 #ifdef CONFIG_TRACE_IRQFLAGS
229 /* Reload some registers clobbered by trace_hardirqs_on */
230 #ifdef CONFIG_64BIT
231 # define TRACE_IRQS_RELOAD_REGS \
232 LONG_L $11, PT_R11(sp); \
233 LONG_L $10, PT_R10(sp); \
234 LONG_L $9, PT_R9(sp); \
235 LONG_L $8, PT_R8(sp); \
236 LONG_L $7, PT_R7(sp); \
237 LONG_L $6, PT_R6(sp); \
238 LONG_L $5, PT_R5(sp); \
239 LONG_L $4, PT_R4(sp); \
240 LONG_L $2, PT_R2(sp)
241 #else
242 # define TRACE_IRQS_RELOAD_REGS \
243 LONG_L $7, PT_R7(sp); \
244 LONG_L $6, PT_R6(sp); \
245 LONG_L $5, PT_R5(sp); \
246 LONG_L $4, PT_R4(sp); \
247 LONG_L $2, PT_R2(sp)
248 #endif
249 # define TRACE_IRQS_ON \
250 CLI; /* make sure trace_hardirqs_on() is called in kernel level */ \
251 jal trace_hardirqs_on
252 # define TRACE_IRQS_ON_RELOAD \
253 TRACE_IRQS_ON; \
254 TRACE_IRQS_RELOAD_REGS
255 # define TRACE_IRQS_OFF \
256 jal trace_hardirqs_off
257 #else
258 # define TRACE_IRQS_ON
259 # define TRACE_IRQS_ON_RELOAD
260 # define TRACE_IRQS_OFF
261 #endif
263 #endif /* _ASM_IRQFLAGS_H */