2 * tvp5150 - Texas Instruments TVP5150A/AM1 video decoder driver
4 * Copyright (c) 2005,2006 Mauro Carvalho Chehab (mchehab@infradead.org)
5 * This code is placed under the terms of the GNU General Public License v2
9 #include <linux/videodev.h>
10 #include <linux/delay.h>
11 #include <linux/video_decoder.h>
12 #include <media/v4l2-common.h>
13 #include <media/tvp5150.h>
15 #include "tvp5150_reg.h"
17 MODULE_DESCRIPTION("Texas Instruments TVP5150A video decoder driver");
18 MODULE_AUTHOR("Mauro Carvalho Chehab");
19 MODULE_LICENSE("GPL");
21 /* standard i2c insmod options */
22 static unsigned short normal_i2c
[] = {
31 module_param(debug
, int, 0);
32 MODULE_PARM_DESC(debug
, "Debug level (0-1)");
34 #define tvp5150_err(fmt, arg...) do { \
35 printk(KERN_ERR "%s %d-%04x: " fmt, c->driver->driver.name, \
36 i2c_adapter_id(c->adapter), c->addr , ## arg); } while (0)
37 #define tvp5150_info(fmt, arg...) do { \
38 printk(KERN_INFO "%s %d-%04x: " fmt, c->driver->driver.name, \
39 i2c_adapter_id(c->adapter), c->addr , ## arg); } while (0)
40 #define tvp5150_dbg(num, fmt, arg...) \
43 printk(KERN_DEBUG "%s debug %d-%04x: " fmt,\
44 c->driver->driver.name, \
45 i2c_adapter_id(c->adapter), \
46 c->addr , ## arg); } while (0)
48 /* supported controls */
49 static struct v4l2_queryctrl tvp5150_qctrl
[] = {
51 .id
= V4L2_CID_BRIGHTNESS
,
52 .type
= V4L2_CTRL_TYPE_INTEGER
,
60 .id
= V4L2_CID_CONTRAST
,
61 .type
= V4L2_CTRL_TYPE_INTEGER
,
69 .id
= V4L2_CID_SATURATION
,
70 .type
= V4L2_CTRL_TYPE_INTEGER
,
79 .type
= V4L2_CTRL_TYPE_INTEGER
,
90 struct i2c_client
*client
;
92 v4l2_std_id norm
; /* Current set standard */
93 struct v4l2_routing route
;
101 static int tvp5150_read(struct i2c_client
*c
, unsigned char addr
)
103 unsigned char buffer
[1];
107 if (1 != (rc
= i2c_master_send(c
, buffer
, 1)))
108 tvp5150_dbg(0, "i2c i/o error: rc == %d (should be 1)\n", rc
);
112 if (1 != (rc
= i2c_master_recv(c
, buffer
, 1)))
113 tvp5150_dbg(0, "i2c i/o error: rc == %d (should be 1)\n", rc
);
115 tvp5150_dbg(2, "tvp5150: read 0x%02x = 0x%02x\n", addr
, buffer
[0]);
120 static inline void tvp5150_write(struct i2c_client
*c
, unsigned char addr
,
123 unsigned char buffer
[2];
128 tvp5150_dbg(2, "tvp5150: writing 0x%02x 0x%02x\n", buffer
[0], buffer
[1]);
129 if (2 != (rc
= i2c_master_send(c
, buffer
, 2)))
130 tvp5150_dbg(0, "i2c i/o error: rc == %d (should be 2)\n", rc
);
133 static void dump_reg_range(struct i2c_client
*c
, char *s
, u8 init
, const u8 end
,int max_line
)
137 while (init
!=(u8
)(end
+1)) {
138 if ((i
%max_line
) == 0) {
141 printk("tvp5150: %s reg 0x%02x = ",s
,init
);
143 printk("%02x ",tvp5150_read(c
, init
));
151 static void dump_reg(struct i2c_client
*c
)
153 printk("tvp5150: Video input source selection #1 = 0x%02x\n",
154 tvp5150_read(c
, TVP5150_VD_IN_SRC_SEL_1
));
155 printk("tvp5150: Analog channel controls = 0x%02x\n",
156 tvp5150_read(c
, TVP5150_ANAL_CHL_CTL
));
157 printk("tvp5150: Operation mode controls = 0x%02x\n",
158 tvp5150_read(c
, TVP5150_OP_MODE_CTL
));
159 printk("tvp5150: Miscellaneous controls = 0x%02x\n",
160 tvp5150_read(c
, TVP5150_MISC_CTL
));
161 printk("tvp5150: Autoswitch mask= 0x%02x\n",
162 tvp5150_read(c
, TVP5150_AUTOSW_MSK
));
163 printk("tvp5150: Color killer threshold control = 0x%02x\n",
164 tvp5150_read(c
, TVP5150_COLOR_KIL_THSH_CTL
));
165 printk("tvp5150: Luminance processing controls #1 #2 and #3 = %02x %02x %02x\n",
166 tvp5150_read(c
, TVP5150_LUMA_PROC_CTL_1
),
167 tvp5150_read(c
, TVP5150_LUMA_PROC_CTL_2
),
168 tvp5150_read(c
, TVP5150_LUMA_PROC_CTL_3
));
169 printk("tvp5150: Brightness control = 0x%02x\n",
170 tvp5150_read(c
, TVP5150_BRIGHT_CTL
));
171 printk("tvp5150: Color saturation control = 0x%02x\n",
172 tvp5150_read(c
, TVP5150_SATURATION_CTL
));
173 printk("tvp5150: Hue control = 0x%02x\n",
174 tvp5150_read(c
, TVP5150_HUE_CTL
));
175 printk("tvp5150: Contrast control = 0x%02x\n",
176 tvp5150_read(c
, TVP5150_CONTRAST_CTL
));
177 printk("tvp5150: Outputs and data rates select = 0x%02x\n",
178 tvp5150_read(c
, TVP5150_DATA_RATE_SEL
));
179 printk("tvp5150: Configuration shared pins = 0x%02x\n",
180 tvp5150_read(c
, TVP5150_CONF_SHARED_PIN
));
181 printk("tvp5150: Active video cropping start = 0x%02x%02x\n",
182 tvp5150_read(c
, TVP5150_ACT_VD_CROP_ST_MSB
),
183 tvp5150_read(c
, TVP5150_ACT_VD_CROP_ST_LSB
));
184 printk("tvp5150: Active video cropping stop = 0x%02x%02x\n",
185 tvp5150_read(c
, TVP5150_ACT_VD_CROP_STP_MSB
),
186 tvp5150_read(c
, TVP5150_ACT_VD_CROP_STP_LSB
));
187 printk("tvp5150: Genlock/RTC = 0x%02x\n",
188 tvp5150_read(c
, TVP5150_GENLOCK
));
189 printk("tvp5150: Horizontal sync start = 0x%02x\n",
190 tvp5150_read(c
, TVP5150_HORIZ_SYNC_START
));
191 printk("tvp5150: Vertical blanking start = 0x%02x\n",
192 tvp5150_read(c
, TVP5150_VERT_BLANKING_START
));
193 printk("tvp5150: Vertical blanking stop = 0x%02x\n",
194 tvp5150_read(c
, TVP5150_VERT_BLANKING_STOP
));
195 printk("tvp5150: Chrominance processing control #1 and #2 = %02x %02x\n",
196 tvp5150_read(c
, TVP5150_CHROMA_PROC_CTL_1
),
197 tvp5150_read(c
, TVP5150_CHROMA_PROC_CTL_2
));
198 printk("tvp5150: Interrupt reset register B = 0x%02x\n",
199 tvp5150_read(c
, TVP5150_INT_RESET_REG_B
));
200 printk("tvp5150: Interrupt enable register B = 0x%02x\n",
201 tvp5150_read(c
, TVP5150_INT_ENABLE_REG_B
));
202 printk("tvp5150: Interrupt configuration register B = 0x%02x\n",
203 tvp5150_read(c
, TVP5150_INTT_CONFIG_REG_B
));
204 printk("tvp5150: Video standard = 0x%02x\n",
205 tvp5150_read(c
, TVP5150_VIDEO_STD
));
206 printk("tvp5150: Chroma gain factor: Cb=0x%02x Cr=0x%02x\n",
207 tvp5150_read(c
, TVP5150_CB_GAIN_FACT
),
208 tvp5150_read(c
, TVP5150_CR_GAIN_FACTOR
));
209 printk("tvp5150: Macrovision on counter = 0x%02x\n",
210 tvp5150_read(c
, TVP5150_MACROVISION_ON_CTR
));
211 printk("tvp5150: Macrovision off counter = 0x%02x\n",
212 tvp5150_read(c
, TVP5150_MACROVISION_OFF_CTR
));
213 printk("tvp5150: ITU-R BT.656.%d timing(TVP5150AM1 only)\n",
214 (tvp5150_read(c
, TVP5150_REV_SELECT
)&1)?3:4);
215 printk("tvp5150: Device ID = %02x%02x\n",
216 tvp5150_read(c
, TVP5150_MSB_DEV_ID
),
217 tvp5150_read(c
, TVP5150_LSB_DEV_ID
));
218 printk("tvp5150: ROM version = (hex) %02x.%02x\n",
219 tvp5150_read(c
, TVP5150_ROM_MAJOR_VER
),
220 tvp5150_read(c
, TVP5150_ROM_MINOR_VER
));
221 printk("tvp5150: Vertical line count = 0x%02x%02x\n",
222 tvp5150_read(c
, TVP5150_VERT_LN_COUNT_MSB
),
223 tvp5150_read(c
, TVP5150_VERT_LN_COUNT_LSB
));
224 printk("tvp5150: Interrupt status register B = 0x%02x\n",
225 tvp5150_read(c
, TVP5150_INT_STATUS_REG_B
));
226 printk("tvp5150: Interrupt active register B = 0x%02x\n",
227 tvp5150_read(c
, TVP5150_INT_ACTIVE_REG_B
));
228 printk("tvp5150: Status regs #1 to #5 = %02x %02x %02x %02x %02x\n",
229 tvp5150_read(c
, TVP5150_STATUS_REG_1
),
230 tvp5150_read(c
, TVP5150_STATUS_REG_2
),
231 tvp5150_read(c
, TVP5150_STATUS_REG_3
),
232 tvp5150_read(c
, TVP5150_STATUS_REG_4
),
233 tvp5150_read(c
, TVP5150_STATUS_REG_5
));
235 dump_reg_range(c
,"Teletext filter 1", TVP5150_TELETEXT_FIL1_INI
,
236 TVP5150_TELETEXT_FIL1_END
,8);
237 dump_reg_range(c
,"Teletext filter 2", TVP5150_TELETEXT_FIL2_INI
,
238 TVP5150_TELETEXT_FIL2_END
,8);
240 printk("tvp5150: Teletext filter enable = 0x%02x\n",
241 tvp5150_read(c
, TVP5150_TELETEXT_FIL_ENA
));
242 printk("tvp5150: Interrupt status register A = 0x%02x\n",
243 tvp5150_read(c
, TVP5150_INT_STATUS_REG_A
));
244 printk("tvp5150: Interrupt enable register A = 0x%02x\n",
245 tvp5150_read(c
, TVP5150_INT_ENABLE_REG_A
));
246 printk("tvp5150: Interrupt configuration = 0x%02x\n",
247 tvp5150_read(c
, TVP5150_INT_CONF
));
248 printk("tvp5150: VDP status register = 0x%02x\n",
249 tvp5150_read(c
, TVP5150_VDP_STATUS_REG
));
250 printk("tvp5150: FIFO word count = 0x%02x\n",
251 tvp5150_read(c
, TVP5150_FIFO_WORD_COUNT
));
252 printk("tvp5150: FIFO interrupt threshold = 0x%02x\n",
253 tvp5150_read(c
, TVP5150_FIFO_INT_THRESHOLD
));
254 printk("tvp5150: FIFO reset = 0x%02x\n",
255 tvp5150_read(c
, TVP5150_FIFO_RESET
));
256 printk("tvp5150: Line number interrupt = 0x%02x\n",
257 tvp5150_read(c
, TVP5150_LINE_NUMBER_INT
));
258 printk("tvp5150: Pixel alignment register = 0x%02x%02x\n",
259 tvp5150_read(c
, TVP5150_PIX_ALIGN_REG_HIGH
),
260 tvp5150_read(c
, TVP5150_PIX_ALIGN_REG_LOW
));
261 printk("tvp5150: FIFO output control = 0x%02x\n",
262 tvp5150_read(c
, TVP5150_FIFO_OUT_CTRL
));
263 printk("tvp5150: Full field enable = 0x%02x\n",
264 tvp5150_read(c
, TVP5150_FULL_FIELD_ENA
));
265 printk("tvp5150: Full field mode register = 0x%02x\n",
266 tvp5150_read(c
, TVP5150_FULL_FIELD_MODE_REG
));
268 dump_reg_range(c
,"CC data", TVP5150_CC_DATA_INI
,
269 TVP5150_CC_DATA_END
,8);
271 dump_reg_range(c
,"WSS data", TVP5150_WSS_DATA_INI
,
272 TVP5150_WSS_DATA_END
,8);
274 dump_reg_range(c
,"VPS data", TVP5150_VPS_DATA_INI
,
275 TVP5150_VPS_DATA_END
,8);
277 dump_reg_range(c
,"VITC data", TVP5150_VITC_DATA_INI
,
278 TVP5150_VITC_DATA_END
,10);
280 dump_reg_range(c
,"Line mode", TVP5150_LINE_MODE_INI
,
281 TVP5150_LINE_MODE_END
,8);
284 /****************************************************************************
286 ****************************************************************************/
288 static inline void tvp5150_selmux(struct i2c_client
*c
)
291 struct tvp5150
*decoder
= i2c_get_clientdata(c
);
294 if ((decoder
->route
.output
& TVP5150_BLACK_SCREEN
) || !decoder
->enable
)
297 switch (decoder
->route
.input
) {
298 case TVP5150_COMPOSITE1
:
301 case TVP5150_COMPOSITE0
:
302 opmode
=0x30; /* TV Mode */
307 opmode
=0; /* Auto Mode */
311 tvp5150_dbg( 1, "Selecting video route: route input=%i, output=%i "
312 "=> tvp5150 input=%i, opmode=%i\n",
313 decoder
->route
.input
,decoder
->route
.output
,
316 tvp5150_write(c
, TVP5150_OP_MODE_CTL
, opmode
);
317 tvp5150_write(c
, TVP5150_VD_IN_SRC_SEL_1
, input
);
320 struct i2c_reg_value
{
325 /* Default values as sugested at TVP5150AM1 datasheet */
326 static const struct i2c_reg_value tvp5150_init_default
[] = {
328 TVP5150_VD_IN_SRC_SEL_1
,0x00
331 TVP5150_ANAL_CHL_CTL
,0x15
334 TVP5150_OP_MODE_CTL
,0x00
337 TVP5150_MISC_CTL
,0x01
340 TVP5150_COLOR_KIL_THSH_CTL
,0x10
343 TVP5150_LUMA_PROC_CTL_1
,0x60
346 TVP5150_LUMA_PROC_CTL_2
,0x00
349 TVP5150_BRIGHT_CTL
,0x80
352 TVP5150_SATURATION_CTL
,0x80
358 TVP5150_CONTRAST_CTL
,0x80
361 TVP5150_DATA_RATE_SEL
,0x47
364 TVP5150_LUMA_PROC_CTL_3
,0x00
367 TVP5150_CONF_SHARED_PIN
,0x08
370 TVP5150_ACT_VD_CROP_ST_MSB
,0x00
373 TVP5150_ACT_VD_CROP_ST_LSB
,0x00
376 TVP5150_ACT_VD_CROP_STP_MSB
,0x00
379 TVP5150_ACT_VD_CROP_STP_LSB
,0x00
385 TVP5150_HORIZ_SYNC_START
,0x80
388 TVP5150_VERT_BLANKING_START
,0x00
391 TVP5150_VERT_BLANKING_STOP
,0x00
394 TVP5150_CHROMA_PROC_CTL_1
,0x0c
397 TVP5150_CHROMA_PROC_CTL_2
,0x14
400 TVP5150_INT_RESET_REG_B
,0x00
403 TVP5150_INT_ENABLE_REG_B
,0x00
406 TVP5150_INTT_CONFIG_REG_B
,0x00
409 TVP5150_VIDEO_STD
,0x00
412 TVP5150_MACROVISION_ON_CTR
,0x0f
415 TVP5150_MACROVISION_OFF_CTR
,0x01
418 TVP5150_TELETEXT_FIL_ENA
,0x00
421 TVP5150_INT_STATUS_REG_A
,0x00
424 TVP5150_INT_ENABLE_REG_A
,0x00
427 TVP5150_INT_CONF
,0x04
430 TVP5150_FIFO_INT_THRESHOLD
,0x80
433 TVP5150_FIFO_RESET
,0x00
436 TVP5150_LINE_NUMBER_INT
,0x00
439 TVP5150_PIX_ALIGN_REG_LOW
,0x4e
442 TVP5150_PIX_ALIGN_REG_HIGH
,0x00
445 TVP5150_FIFO_OUT_CTRL
,0x01
448 TVP5150_FULL_FIELD_ENA
,0x00
451 TVP5150_LINE_MODE_INI
,0x00
454 TVP5150_FULL_FIELD_MODE_REG
,0x7f
461 /* Default values as sugested at TVP5150AM1 datasheet */
462 static const struct i2c_reg_value tvp5150_init_enable
[] = {
464 TVP5150_CONF_SHARED_PIN
, 2
465 },{ /* Automatic offset and AGC enabled */
466 TVP5150_ANAL_CHL_CTL
, 0x15
467 },{ /* Activate YCrCb output 0x9 or 0xd ? */
468 TVP5150_MISC_CTL
, 0x6f
469 },{ /* Activates video std autodetection for all standards */
470 TVP5150_AUTOSW_MSK
, 0x0
471 },{ /* Default format: 0x47. For 4:2:2: 0x40 */
472 TVP5150_DATA_RATE_SEL
, 0x47
474 TVP5150_CHROMA_PROC_CTL_1
, 0x0c
476 TVP5150_CHROMA_PROC_CTL_2
, 0x54
477 },{ /* Non documented, but initialized on WinTV USB2 */
484 struct tvp5150_vbi_type
{
485 unsigned int vbi_type
;
486 unsigned int ini_line
;
487 unsigned int end_line
;
488 unsigned int by_field
:1;
491 struct i2c_vbi_ram_value
{
493 struct tvp5150_vbi_type type
;
494 unsigned char values
[16];
497 /* This struct have the values for each supported VBI Standard
499 tvp5150_vbi_types should follow the same order as vbi_ram_default
500 * value 0 means rom position 0x10, value 1 means rom position 0x30
501 * and so on. There are 16 possible locations from 0 to 15.
504 static struct i2c_vbi_ram_value vbi_ram_default
[] =
506 /* FIXME: Current api doesn't handle all VBI types, those not
507 yet supported are placed under #if 0 */
509 {0x010, /* Teletext, SECAM, WST System A */
510 {V4L2_SLICED_TELETEXT_SECAM
,6,23,1},
511 { 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x26,
512 0xe6, 0xb4, 0x0e, 0x00, 0x00, 0x00, 0x10, 0x00 }
515 {0x030, /* Teletext, PAL, WST System B */
516 {V4L2_SLICED_TELETEXT_B
,6,22,1},
517 { 0xaa, 0xaa, 0xff, 0xff, 0x27, 0x2e, 0x20, 0x2b,
518 0xa6, 0x72, 0x10, 0x00, 0x00, 0x00, 0x10, 0x00 }
521 {0x050, /* Teletext, PAL, WST System C */
522 {V4L2_SLICED_TELETEXT_PAL_C
,6,22,1},
523 { 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x22,
524 0xa6, 0x98, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 }
526 {0x070, /* Teletext, NTSC, WST System B */
527 {V4L2_SLICED_TELETEXT_NTSC_B
,10,21,1},
528 { 0xaa, 0xaa, 0xff, 0xff, 0x27, 0x2e, 0x20, 0x23,
529 0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 }
531 {0x090, /* Tetetext, NTSC NABTS System C */
532 {V4L2_SLICED_TELETEXT_NTSC_C
,10,21,1},
533 { 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x22,
534 0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x15, 0x00 }
536 {0x0b0, /* Teletext, NTSC-J, NABTS System D */
537 {V4L2_SLICED_TELETEXT_NTSC_D
,10,21,1},
538 { 0xaa, 0xaa, 0xff, 0xff, 0xa7, 0x2e, 0x20, 0x23,
539 0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 }
541 {0x0d0, /* Closed Caption, PAL/SECAM */
542 {V4L2_SLICED_CAPTION_625
,22,22,1},
543 { 0xaa, 0x2a, 0xff, 0x3f, 0x04, 0x51, 0x6e, 0x02,
544 0xa6, 0x7b, 0x09, 0x00, 0x00, 0x00, 0x27, 0x00 }
547 {0x0f0, /* Closed Caption, NTSC */
548 {V4L2_SLICED_CAPTION_525
,21,21,1},
549 { 0xaa, 0x2a, 0xff, 0x3f, 0x04, 0x51, 0x6e, 0x02,
550 0x69, 0x8c, 0x09, 0x00, 0x00, 0x00, 0x27, 0x00 }
552 {0x110, /* Wide Screen Signal, PAL/SECAM */
553 {V4L2_SLICED_WSS_625
,23,23,1},
554 { 0x5b, 0x55, 0xc5, 0xff, 0x00, 0x71, 0x6e, 0x42,
555 0xa6, 0xcd, 0x0f, 0x00, 0x00, 0x00, 0x3a, 0x00 }
558 {0x130, /* Wide Screen Signal, NTSC C */
559 {V4L2_SLICED_WSS_525
,20,20,1},
560 { 0x38, 0x00, 0x3f, 0x00, 0x00, 0x71, 0x6e, 0x43,
561 0x69, 0x7c, 0x08, 0x00, 0x00, 0x00, 0x39, 0x00 }
563 {0x150, /* Vertical Interval Timecode (VITC), PAL/SECAM */
564 {V4l2_SLICED_VITC_625
,6,22,0},
565 { 0x00, 0x00, 0x00, 0x00, 0x00, 0x8f, 0x6d, 0x49,
566 0xa6, 0x85, 0x08, 0x00, 0x00, 0x00, 0x4c, 0x00 }
568 {0x170, /* Vertical Interval Timecode (VITC), NTSC */
569 {V4l2_SLICED_VITC_525
,10,20,0},
570 { 0x00, 0x00, 0x00, 0x00, 0x00, 0x8f, 0x6d, 0x49,
571 0x69, 0x94, 0x08, 0x00, 0x00, 0x00, 0x4c, 0x00 }
574 {0x190, /* Video Program System (VPS), PAL */
575 {V4L2_SLICED_VPS
,16,16,0},
576 { 0xaa, 0xaa, 0xff, 0xff, 0xba, 0xce, 0x2b, 0x0d,
577 0xa6, 0xda, 0x0b, 0x00, 0x00, 0x00, 0x60, 0x00 }
579 /* 0x1d0 User programmable */
585 static int tvp5150_write_inittab(struct i2c_client
*c
,
586 const struct i2c_reg_value
*regs
)
588 while (regs
->reg
!= 0xff) {
589 tvp5150_write(c
, regs
->reg
, regs
->value
);
595 static int tvp5150_vdp_init(struct i2c_client
*c
,
596 const struct i2c_vbi_ram_value
*regs
)
600 /* Disable Full Field */
601 tvp5150_write(c
, TVP5150_FULL_FIELD_ENA
, 0);
603 /* Before programming, Line mode should be at 0xff */
604 for (i
=TVP5150_LINE_MODE_INI
; i
<=TVP5150_LINE_MODE_END
; i
++)
605 tvp5150_write(c
, i
, 0xff);
608 while (regs
->reg
!= (u16
)-1 ) {
609 tvp5150_write(c
, TVP5150_CONF_RAM_ADDR_HIGH
,regs
->reg
>>8);
610 tvp5150_write(c
, TVP5150_CONF_RAM_ADDR_LOW
,regs
->reg
);
613 tvp5150_write(c
, TVP5150_VDP_CONF_RAM_DATA
,regs
->values
[i
]);
620 /* Fills VBI capabilities based on i2c_vbi_ram_value struct */
621 static void tvp5150_vbi_get_cap(const struct i2c_vbi_ram_value
*regs
,
622 struct v4l2_sliced_vbi_cap
*cap
)
626 memset(cap
, 0, sizeof *cap
);
628 while (regs
->reg
!= (u16
)-1 ) {
629 for (line
=regs
->type
.ini_line
;line
<=regs
->type
.end_line
;line
++) {
630 cap
->service_lines
[0][line
] |= regs
->type
.vbi_type
;
632 cap
->service_set
|= regs
->type
.vbi_type
;
638 /* Set vbi processing
639 * type - one of tvp5150_vbi_types
640 * line - line to gather data
641 * fields: bit 0 field1, bit 1, field2
642 * flags (default=0xf0) is a bitmask, were set means:
643 * bit 7: enable filtering null bytes on CC
644 * bit 6: send data also to FIFO
645 * bit 5: don't allow data with errors on FIFO
646 * bit 4: enable ECC when possible
647 * pix_align = pix alignment:
651 static int tvp5150_set_vbi(struct i2c_client
*c
,
652 const struct i2c_vbi_ram_value
*regs
,
653 unsigned int type
,u8 flags
, int line
,
656 struct tvp5150
*decoder
= i2c_get_clientdata(c
);
657 v4l2_std_id std
=decoder
->norm
;
661 if (std
== V4L2_STD_ALL
) {
662 tvp5150_err("VBI can't be configured without knowing number of lines\n");
664 } else if (std
&& V4L2_STD_625_50
) {
665 /* Don't follow NTSC Line number convension */
672 while (regs
->reg
!= (u16
)-1 ) {
673 if ((type
& regs
->type
.vbi_type
) &&
674 (line
>=regs
->type
.ini_line
) &&
675 (line
<=regs
->type
.end_line
)) {
676 type
=regs
->type
.vbi_type
;
683 if (regs
->reg
== (u16
)-1)
686 type
=pos
| (flags
& 0xf0);
687 reg
=((line
-6)<<1)+TVP5150_LINE_MODE_INI
;
690 tvp5150_write(c
, reg
, type
);
694 tvp5150_write(c
, reg
+1, type
);
700 static int tvp5150_get_vbi(struct i2c_client
*c
,
701 const struct i2c_vbi_ram_value
*regs
, int line
)
703 struct tvp5150
*decoder
= i2c_get_clientdata(c
);
704 v4l2_std_id std
=decoder
->norm
;
708 if (std
== V4L2_STD_ALL
) {
709 tvp5150_err("VBI can't be configured without knowing number of lines\n");
711 } else if (std
&& V4L2_STD_625_50
) {
712 /* Don't follow NTSC Line number convension */
719 reg
=((line
-6)<<1)+TVP5150_LINE_MODE_INI
;
721 pos
=tvp5150_read(c
, reg
)&0x0f;
723 type
=regs
[pos
].type
.vbi_type
;
725 pos
=tvp5150_read(c
, reg
+1)&0x0f;
727 type
|=regs
[pos
].type
.vbi_type
;
731 static int tvp5150_set_std(struct i2c_client
*c
, v4l2_std_id std
)
733 struct tvp5150
*decoder
= i2c_get_clientdata(c
);
738 /* First tests should be against specific std */
740 if (std
== V4L2_STD_ALL
) {
741 fmt
=0; /* Autodetect mode */
742 } else if (std
& V4L2_STD_NTSC_443
) {
744 } else if (std
& V4L2_STD_PAL_M
) {
746 } else if (std
& (V4L2_STD_PAL_N
| V4L2_STD_PAL_Nc
)) {
749 /* Then, test against generic ones */
750 if (std
& V4L2_STD_NTSC
) {
752 } else if (std
& V4L2_STD_PAL
) {
754 } else if (std
& V4L2_STD_SECAM
) {
759 tvp5150_dbg(1,"Set video std register to %d.\n",fmt
);
760 tvp5150_write(c
, TVP5150_VIDEO_STD
, fmt
);
765 static inline void tvp5150_reset(struct i2c_client
*c
)
767 u8 msb_id
, lsb_id
, msb_rom
, lsb_rom
;
768 struct tvp5150
*decoder
= i2c_get_clientdata(c
);
770 msb_id
=tvp5150_read(c
,TVP5150_MSB_DEV_ID
);
771 lsb_id
=tvp5150_read(c
,TVP5150_LSB_DEV_ID
);
772 msb_rom
=tvp5150_read(c
,TVP5150_ROM_MAJOR_VER
);
773 lsb_rom
=tvp5150_read(c
,TVP5150_ROM_MINOR_VER
);
775 if ((msb_rom
==4)&&(lsb_rom
==0)) { /* Is TVP5150AM1 */
776 tvp5150_info("tvp%02x%02xam1 detected.\n",msb_id
, lsb_id
);
778 /* ITU-T BT.656.4 timing */
779 tvp5150_write(c
,TVP5150_REV_SELECT
,0);
781 if ((msb_rom
==3)||(lsb_rom
==0x21)) { /* Is TVP5150A */
782 tvp5150_info("tvp%02x%02xa detected.\n",msb_id
, lsb_id
);
784 tvp5150_info("*** unknown tvp%02x%02x chip detected.\n",msb_id
,lsb_id
);
785 tvp5150_info("*** Rom ver is %d.%d\n",msb_rom
,lsb_rom
);
789 /* Initializes TVP5150 to its default values */
790 tvp5150_write_inittab(c
, tvp5150_init_default
);
792 /* Initializes VDP registers */
793 tvp5150_vdp_init(c
, vbi_ram_default
);
795 /* Selects decoder input */
798 /* Initializes TVP5150 to stream enabled values */
799 tvp5150_write_inittab(c
, tvp5150_init_enable
);
801 /* Initialize image preferences */
802 tvp5150_write(c
, TVP5150_BRIGHT_CTL
, decoder
->bright
>> 8);
803 tvp5150_write(c
, TVP5150_CONTRAST_CTL
, decoder
->contrast
>> 8);
804 tvp5150_write(c
, TVP5150_SATURATION_CTL
, decoder
->contrast
>> 8);
805 tvp5150_write(c
, TVP5150_HUE_CTL
, (decoder
->hue
- 32768) >> 8);
807 tvp5150_set_std(c
, decoder
->norm
);
810 static int tvp5150_get_ctrl(struct i2c_client
*c
, struct v4l2_control
*ctrl
)
812 /* struct tvp5150 *decoder = i2c_get_clientdata(c); */
815 case V4L2_CID_BRIGHTNESS
:
816 ctrl
->value
= tvp5150_read(c
, TVP5150_BRIGHT_CTL
);
818 case V4L2_CID_CONTRAST
:
819 ctrl
->value
= tvp5150_read(c
, TVP5150_CONTRAST_CTL
);
821 case V4L2_CID_SATURATION
:
822 ctrl
->value
= tvp5150_read(c
, TVP5150_SATURATION_CTL
);
825 ctrl
->value
= tvp5150_read(c
, TVP5150_HUE_CTL
);
831 static int tvp5150_set_ctrl(struct i2c_client
*c
, struct v4l2_control
*ctrl
)
833 /* struct tvp5150 *decoder = i2c_get_clientdata(c); */
836 case V4L2_CID_BRIGHTNESS
:
837 tvp5150_write(c
, TVP5150_BRIGHT_CTL
, ctrl
->value
);
839 case V4L2_CID_CONTRAST
:
840 tvp5150_write(c
, TVP5150_CONTRAST_CTL
, ctrl
->value
);
842 case V4L2_CID_SATURATION
:
843 tvp5150_write(c
, TVP5150_SATURATION_CTL
, ctrl
->value
);
846 tvp5150_write(c
, TVP5150_HUE_CTL
, ctrl
->value
);
852 /****************************************************************************
854 ****************************************************************************/
855 static int tvp5150_command(struct i2c_client
*c
,
856 unsigned int cmd
, void *arg
)
858 struct tvp5150
*decoder
= i2c_get_clientdata(c
);
863 case VIDIOC_INT_RESET
:
866 case VIDIOC_INT_G_VIDEO_ROUTING
:
868 struct v4l2_routing
*route
= arg
;
870 *route
= decoder
->route
;
873 case VIDIOC_INT_S_VIDEO_ROUTING
:
875 struct v4l2_routing
*route
= arg
;
877 decoder
->route
= *route
;
882 if (decoder
->norm
== *(v4l2_std_id
*)arg
)
884 return tvp5150_set_std(c
, *(v4l2_std_id
*)arg
);
886 *(v4l2_std_id
*)arg
= decoder
->norm
;
889 case VIDIOC_G_SLICED_VBI_CAP
:
891 struct v4l2_sliced_vbi_cap
*cap
= arg
;
892 tvp5150_dbg(1, "VIDIOC_G_SLICED_VBI_CAP\n");
894 tvp5150_vbi_get_cap(vbi_ram_default
, cap
);
899 struct v4l2_format
*fmt
;
900 struct v4l2_sliced_vbi_format
*svbi
;
904 if (fmt
->type
!= V4L2_BUF_TYPE_SLICED_VBI_CAPTURE
)
906 svbi
= &fmt
->fmt
.sliced
;
907 if (svbi
->service_set
!= 0) {
908 for (i
= 0; i
<= 23; i
++) {
909 svbi
->service_lines
[1][i
] = 0;
911 svbi
->service_lines
[0][i
]=tvp5150_set_vbi(c
,
913 svbi
->service_lines
[0][i
],0xf0,i
,3);
916 tvp5150_write(c
, TVP5150_FIFO_OUT_CTRL
,1);
919 tvp5150_write(c
, TVP5150_FIFO_OUT_CTRL
,0);
921 /* Disable Full Field */
922 tvp5150_write(c
, TVP5150_FULL_FIELD_ENA
, 0);
924 /* Disable Line modes */
925 for (i
=TVP5150_LINE_MODE_INI
; i
<=TVP5150_LINE_MODE_END
; i
++)
926 tvp5150_write(c
, i
, 0xff);
932 struct v4l2_format
*fmt
;
933 struct v4l2_sliced_vbi_format
*svbi
;
938 if (fmt
->type
!= V4L2_BUF_TYPE_SLICED_VBI_CAPTURE
)
940 svbi
= &fmt
->fmt
.sliced
;
941 memset(svbi
, 0, sizeof(*svbi
));
943 for (i
= 0; i
<= 23; i
++) {
944 svbi
->service_lines
[0][i
]=tvp5150_get_vbi(c
,
946 mask
|=svbi
->service_lines
[0][i
];
948 svbi
->service_set
=mask
;
952 #ifdef CONFIG_VIDEO_ADV_DEBUG
953 case VIDIOC_DBG_G_REGISTER
:
954 case VIDIOC_DBG_S_REGISTER
:
956 struct v4l2_register
*reg
= arg
;
958 if (!v4l2_chip_match_i2c_client(c
, reg
->match_type
, reg
->match_chip
))
960 if (!capable(CAP_SYS_ADMIN
))
962 if (cmd
== VIDIOC_DBG_G_REGISTER
)
963 reg
->val
= tvp5150_read(c
, reg
->reg
& 0xff);
965 tvp5150_write(c
, reg
->reg
& 0xff, reg
->val
& 0xff);
970 case VIDIOC_LOG_STATUS
:
976 struct v4l2_tuner
*vt
= arg
;
977 int status
= tvp5150_read(c
, 0x88);
979 vt
->signal
= ((status
& 0x04) && (status
& 0x02)) ? 0xffff : 0x0;
982 case VIDIOC_QUERYCTRL
:
984 struct v4l2_queryctrl
*qc
= arg
;
987 tvp5150_dbg(1, "VIDIOC_QUERYCTRL called\n");
989 for (i
= 0; i
< ARRAY_SIZE(tvp5150_qctrl
); i
++)
990 if (qc
->id
&& qc
->id
== tvp5150_qctrl
[i
].id
) {
991 memcpy(qc
, &(tvp5150_qctrl
[i
]),
1000 struct v4l2_control
*ctrl
= arg
;
1001 tvp5150_dbg(1, "VIDIOC_G_CTRL called\n");
1003 return tvp5150_get_ctrl(c
, ctrl
);
1007 struct v4l2_control
*ctrl
= arg
;
1009 n
= ARRAY_SIZE(tvp5150_qctrl
);
1010 for (i
= 0; i
< n
; i
++)
1011 if (ctrl
->id
== tvp5150_qctrl
[i
].id
) {
1013 tvp5150_qctrl
[i
].minimum
1015 tvp5150_qctrl
[i
].maximum
)
1018 "VIDIOC_S_CTRL: id=%d, value=%d\n",
1019 ctrl
->id
, ctrl
->value
);
1020 return tvp5150_set_ctrl(c
, ctrl
);
1032 /****************************************************************************
1034 ****************************************************************************/
1035 static struct i2c_driver driver
;
1037 static struct i2c_client client_template
= {
1042 static int tvp5150_detect_client(struct i2c_adapter
*adapter
,
1043 int address
, int kind
)
1045 struct i2c_client
*c
;
1046 struct tvp5150
*core
;
1051 "tvp5150.c: detecting tvp5150 client on address 0x%x\n",
1054 client_template
.adapter
= adapter
;
1055 client_template
.addr
= address
;
1057 /* Check if the adapter supports the needed features */
1058 if (!i2c_check_functionality
1060 I2C_FUNC_SMBUS_READ_BYTE
| I2C_FUNC_SMBUS_WRITE_BYTE_DATA
))
1063 c
= kmalloc(sizeof(struct i2c_client
), GFP_KERNEL
);
1066 memcpy(c
, &client_template
, sizeof(struct i2c_client
));
1068 core
= kzalloc(sizeof(struct tvp5150
), GFP_KERNEL
);
1073 i2c_set_clientdata(c
, core
);
1075 rv
= i2c_attach_client(c
);
1077 core
->norm
= V4L2_STD_ALL
; /* Default is autodetect */
1078 core
->route
.input
= TVP5150_COMPOSITE1
;
1080 core
->bright
= 32768;
1081 core
->contrast
= 32768;
1096 static int tvp5150_attach_adapter(struct i2c_adapter
*adapter
)
1100 "tvp5150.c: starting probe for adapter %s (0x%x)\n",
1101 adapter
->name
, adapter
->id
);
1102 return i2c_probe(adapter
, &addr_data
, &tvp5150_detect_client
);
1105 static int tvp5150_detach_client(struct i2c_client
*c
)
1107 struct tvp5150
*decoder
= i2c_get_clientdata(c
);
1111 "tvp5150.c: removing tvp5150 adapter on address 0x%x\n",
1114 err
= i2c_detach_client(c
);
1125 /* ----------------------------------------------------------------------- */
1127 static struct i2c_driver driver
= {
1131 .id
= I2C_DRIVERID_TVP5150
,
1133 .attach_adapter
= tvp5150_attach_adapter
,
1134 .detach_client
= tvp5150_detach_client
,
1136 .command
= tvp5150_command
,
1139 static int __init
tvp5150_init(void)
1141 return i2c_add_driver(&driver
);
1144 static void __exit
tvp5150_exit(void)
1146 i2c_del_driver(&driver
);
1149 module_init(tvp5150_init
);
1150 module_exit(tvp5150_exit
);