drivers/usb/serial/ark3116.c

   1 /*
   2  * Copyright (C) 2006
   3  *   Simon Schulz (ark3116_driver <at> auctionant.de)
   4  *
   5  * ark3116
   6  * - implements a driver for the arkmicro ark3116 chipset (vendor=0x6547,
   7  *   productid=0x0232) (used in a datacable called KQ-U8A)
   8  *
   9  * - based on code by krisfx -> thanks !!
  10  *   (see http://www.linuxquestions.org/questions/showthread.php?p=2184457#post2184457)
  11  *
  12  *  - based on logs created by usbsnoopy
  13  *
  14  * This program is free software; you can redistribute it and/or modify it
  15  * under the terms of the GNU General Public License as published by the
  16  * Free Software Foundation; either version 2 of the License, or (at your
  17  * option) any later version.
  18  */
  19
  20 #include <linux/kernel.h>
  21 #include <linux/init.h>
  22 #include <linux/tty.h>
  23 #include <linux/module.h>
  24 #include <linux/usb.h>
  25 #include <linux/usb/serial.h>
  26 #include <linux/serial.h>
  27 #include <asm/uaccess.h>
  28
  29
  30 static int debug;
  31
  32 static struct usb_device_id id_table [] = {
  33         { USB_DEVICE(0x6547, 0x0232) },
  34         { },
  35 };
  36 MODULE_DEVICE_TABLE(usb, id_table);
  37
  38 struct ark3116_private {
  39         spinlock_t lock;
  40         u8 termios_initialized;
  41 };
  42
  43 static inline void ARK3116_SND(struct usb_serial *serial, int seq,
  44                                __u8 request, __u8 requesttype,
  45                                __u16 value, __u16 index)
  46 {
  47         int result;
  48         result = usb_control_msg(serial->dev,
  49                                  usb_sndctrlpipe(serial->dev, 0),
  50                                  request, requesttype, value, index,
  51                                  NULL, 0x00, 1000);
  52         dbg("%03d > ok", seq);
  53 }
  54
  55 static inline void ARK3116_RCV(struct usb_serial *serial, int seq,
  56                                __u8 request, __u8 requesttype,
  57                                __u16 value, __u16 index, __u8 expected,
  58                                char *buf)
  59 {
  60         int result;
  61         result = usb_control_msg(serial->dev,
  62                                  usb_rcvctrlpipe(serial->dev, 0),
  63                                  request, requesttype, value, index,
  64                                  buf, 0x0000001, 1000);
  65         if (result)
  66                 dbg("%03d < %d bytes [0x%02X]", seq, result,
  67                     ((unsigned char *)buf)[0]);
  68         else
  69                 dbg("%03d < 0 bytes", seq);
  70 }
  71
  72 static inline void ARK3116_RCV_QUIET(struct usb_serial *serial,
  73                                      __u8 request, __u8 requesttype,
  74                                      __u16 value, __u16 index, char *buf)
  75 {
  76         usb_control_msg(serial->dev,
  77                         usb_rcvctrlpipe(serial->dev, 0),
  78                         request, requesttype, value, index,
  79                         buf, 0x0000001, 1000);
  80 }
  81
  82 static int ark3116_attach(struct usb_serial *serial)
  83 {
  84         char *buf;
  85         struct ark3116_private *priv;
  86         int i;
  87
  88         for (i = 0; i < serial->num_ports; ++i) {
  89                 priv = kzalloc(sizeof(struct ark3116_private), GFP_KERNEL);
  90                 if (!priv)
  91                         goto cleanup;
  92                 spin_lock_init(&priv->lock);
  93
  94                 usb_set_serial_port_data(serial->port[i], priv);
  95         }
  96
  97         buf = kmalloc(1, GFP_KERNEL);
  98         if (!buf) {
  99                 dbg("error kmalloc -> out of mem?");
 100                 goto cleanup;
 101         }
 102
 103         /* 3 */
 104         ARK3116_SND(serial, 3, 0xFE, 0x40, 0x0008, 0x0002);
 105         ARK3116_SND(serial, 4, 0xFE, 0x40, 0x0008, 0x0001);
 106         ARK3116_SND(serial, 5, 0xFE, 0x40, 0x0000, 0x0008);
 107         ARK3116_SND(serial, 6, 0xFE, 0x40, 0x0000, 0x000B);
 108
 109         /* <-- seq7 */
 110         ARK3116_RCV(serial,  7, 0xFE, 0xC0, 0x0000, 0x0003, 0x00, buf);
 111         ARK3116_SND(serial,  8, 0xFE, 0x40, 0x0080, 0x0003);
 112         ARK3116_SND(serial,  9, 0xFE, 0x40, 0x001A, 0x0000);
 113         ARK3116_SND(serial, 10, 0xFE, 0x40, 0x0000, 0x0001);
 114         ARK3116_SND(serial, 11, 0xFE, 0x40, 0x0000, 0x0003);
 115
 116         /* <-- seq12 */
 117         ARK3116_RCV(serial, 12, 0xFE, 0xC0, 0x0000, 0x0004, 0x00, buf);
 118         ARK3116_SND(serial, 13, 0xFE, 0x40, 0x0000, 0x0004);
 119
 120         /* 14 */
 121         ARK3116_RCV(serial, 14, 0xFE, 0xC0, 0x0000, 0x0004, 0x00, buf);
 122         ARK3116_SND(serial, 15, 0xFE, 0x40, 0x0000, 0x0004);
 123
 124         /* 16 */
 125         ARK3116_RCV(serial, 16, 0xFE, 0xC0, 0x0000, 0x0004, 0x00, buf);
 126         /* --> seq17 */
 127         ARK3116_SND(serial, 17, 0xFE, 0x40, 0x0001, 0x0004);
 128
 129         /* <-- seq18 */
 130         ARK3116_RCV(serial, 18, 0xFE, 0xC0, 0x0000, 0x0004, 0x01, buf);
 131
 132         /* --> seq19 */
 133         ARK3116_SND(serial, 19, 0xFE, 0x40, 0x0003, 0x0004);
 134
 135         /* <-- seq20 */
 136         /* seems like serial port status info (RTS, CTS, ...) */
 137         /* returns modem control line status?! */
 138         ARK3116_RCV(serial, 20, 0xFE, 0xC0, 0x0000, 0x0006, 0xFF, buf);
 139
 140         /* set 9600 baud & do some init?! */
 141         ARK3116_SND(serial, 147, 0xFE, 0x40, 0x0083, 0x0003);
 142         ARK3116_SND(serial, 148, 0xFE, 0x40, 0x0038, 0x0000);
 143         ARK3116_SND(serial, 149, 0xFE, 0x40, 0x0001, 0x0001);
 144         ARK3116_SND(serial, 150, 0xFE, 0x40, 0x0003, 0x0003);
 145         ARK3116_RCV(serial, 151, 0xFE, 0xC0, 0x0000, 0x0004, 0x03, buf);
 146         ARK3116_SND(serial, 152, 0xFE, 0x40, 0x0000, 0x0003);
 147         ARK3116_RCV(serial, 153, 0xFE, 0xC0, 0x0000, 0x0003, 0x00, buf);
 148         ARK3116_SND(serial, 154, 0xFE, 0x40, 0x0003, 0x0003);
 149
 150         kfree(buf);
 151         return 0;
 152
 153 cleanup:
 154         for (--i; i >= 0; --i) {
 155                 kfree(usb_get_serial_port_data(serial->port[i]));
 156                 usb_set_serial_port_data(serial->port[i], NULL);
 157         }
 158         return -ENOMEM;
 159 }
 160
 161 static void ark3116_set_termios(struct usb_serial_port *port,
 162                                 struct ktermios *old_termios)
 163 {
 164         struct usb_serial *serial = port->serial;
 165         struct ark3116_private *priv = usb_get_serial_port_data(port);
 166         struct ktermios *termios = port->tty->termios;
 167         unsigned int cflag = termios->c_cflag;
 168         unsigned long flags;
 169         int baud;
 170         int ark3116_baud;
 171         char *buf;
 172         char config;
 173
 174         config = 0;
 175
 176         dbg("%s - port %d", __FUNCTION__, port->number);
 177
 178         spin_lock_irqsave(&priv->lock, flags);
 179         if (!priv->termios_initialized) {
 180                 *(port->tty->termios) = tty_std_termios;
 181                 port->tty->termios->c_cflag = B9600 | CS8
 182                                               | CREAD | HUPCL | CLOCAL;
 183                 termios->c_ispeed = 9600;
 184                 termios->c_ospeed = 9600;
 185                 priv->termios_initialized = 1;
 186         }
 187         spin_unlock_irqrestore(&priv->lock, flags);
 188
 189         cflag = termios->c_cflag;
 190         termios->c_cflag &= ~(CMSPAR|CRTSCTS);
 191
 192         buf = kmalloc(1, GFP_KERNEL);
 193         if (!buf) {
 194                 dbg("error kmalloc");
 195                 return;
 196         }
 197
 198         /* set data bit count (8/7/6/5) */
 199         if (cflag & CSIZE) {
 200                 switch (cflag & CSIZE) {
 201                 case CS5:
 202                         config |= 0x00;
 203                         dbg("setting CS5");
 204                         break;
 205                 case CS6:
 206                         config |= 0x01;
 207                         dbg("setting CS6");
 208                         break;
 209                 case CS7:
 210                         config |= 0x02;
 211                         dbg("setting CS7");
 212                         break;
 213                 default:
 214                         dbg("CSIZE was set but not CS5-CS8, using CS8!");
 215                         /* fall through */
 216                 case CS8:
 217                         config |= 0x03;
 218                         dbg("setting CS8");
 219                         break;
 220                 }
 221         }
 222
 223         /* set parity (NONE/EVEN/ODD) */
 224         if (cflag & PARENB) {
 225                 if (cflag & PARODD) {
 226                         config |= 0x08;
 227                         dbg("setting parity to ODD");
 228                 } else {
 229                         config |= 0x18;
 230                         dbg("setting parity to EVEN");
 231                 }
 232         } else {
 233                 dbg("setting parity to NONE");
 234         }
 235
 236         /* set stop bit (1/2) */
 237         if (cflag & CSTOPB) {
 238                 config |= 0x04;
 239                 dbg("setting 2 stop bits");
 240         } else {
 241                 dbg("setting 1 stop bit");
 242         }
 243
 244         /* set baudrate */
 245         baud = tty_get_baud_rate(port->tty);
 246
 247         switch (baud) {
 248                 case 75:
 249                 case 150:
 250                 case 300:
 251                 case 600:
 252                 case 1200:
 253                 case 1800:
 254                 case 2400:
 255                 case 4800:
 256                 case 9600:
 257                 case 19200:
 258                 case 38400:
 259                 case 57600:
 260                 case 115200:
 261                 case 230400:
 262                 case 460800:
 263                         /* Report the resulting rate back to the caller */
 264                         tty_encode_baud_rate(port->tty, baud, baud);
 265                         break;
 266                 /* set 9600 as default (if given baudrate is invalid for example) */
 267                 default:
 268                         tty_encode_baud_rate(port->tty, 9600, 9600);
 269                 case 0:
 270                         baud = 9600;
 271         }
 272
 273         /*
 274          * found by try'n'error, be careful, maybe there are other options
 275          * for multiplicator etc! (3.5 for example)
 276          */
 277         if (baud == 460800)
 278                 /* strange, for 460800 the formula is wrong
 279                  * if using round() then 9600baud is wrong) */
 280                 ark3116_baud = 7;
 281         else
 282                 ark3116_baud = 3000000 / baud;
 283
 284         /* ? */
 285         ARK3116_RCV(serial, 0, 0xFE, 0xC0, 0x0000, 0x0003, 0x03, buf);
 286
 287         /* offset = buf[0]; */
 288         /* offset = 0x03; */
 289         /* dbg("using 0x%04X as target for 0x0003:", 0x0080 + offset); */
 290
 291         /* set baudrate */
 292         dbg("setting baudrate to %d (->reg=%d)", baud, ark3116_baud);
 293         ARK3116_SND(serial, 147, 0xFE, 0x40, 0x0083, 0x0003);
 294         ARK3116_SND(serial, 148, 0xFE, 0x40,
 295                             (ark3116_baud & 0x00FF), 0x0000);
 296         ARK3116_SND(serial, 149, 0xFE, 0x40,
 297                             (ark3116_baud & 0xFF00) >> 8, 0x0001);
 298         ARK3116_SND(serial, 150, 0xFE, 0x40, 0x0003, 0x0003);
 299
 300         /* ? */
 301         ARK3116_RCV(serial, 151, 0xFE, 0xC0, 0x0000, 0x0004, 0x03, buf);
 302         ARK3116_SND(serial, 152, 0xFE, 0x40, 0x0000, 0x0003);
 303
 304         /* set data bit count, stop bit count & parity: */
 305         dbg("updating bit count, stop bit or parity (cfg=0x%02X)", config);
 306         ARK3116_RCV(serial, 153, 0xFE, 0xC0, 0x0000, 0x0003, 0x00, buf);
 307         ARK3116_SND(serial, 154, 0xFE, 0x40, config, 0x0003);
 308
 309         if (cflag & CRTSCTS)
 310                 dbg("CRTSCTS not supported by chipset?!");
 311
 312         /* TEST ARK3116_SND(154, 0xFE, 0x40, 0xFFFF, 0x0006); */
 313
 314         kfree(buf);
 315
 316         return;
 317 }
 318
 319 static int ark3116_open(struct usb_serial_port *port, struct file *filp)
 320 {
 321         struct ktermios tmp_termios;
 322         struct usb_serial *serial = port->serial;
 323         char *buf;
 324         int result = 0;
 325
 326         dbg("%s - port %d", __FUNCTION__, port->number);
 327
 328         buf = kmalloc(1, GFP_KERNEL);
 329         if (!buf) {
 330                 dbg("error kmalloc -> out of mem?");
 331                 return -ENOMEM;
 332         }
 333
 334         result = usb_serial_generic_open(port, filp);
 335         if (result)
 336                 goto err_out;
 337
 338         /* open */
 339         ARK3116_RCV(serial, 111, 0xFE, 0xC0, 0x0000, 0x0003, 0x02, buf);
 340
 341         ARK3116_SND(serial, 112, 0xFE, 0x40, 0x0082, 0x0003);
 342         ARK3116_SND(serial, 113, 0xFE, 0x40, 0x001A, 0x0000);
 343         ARK3116_SND(serial, 114, 0xFE, 0x40, 0x0000, 0x0001);
 344         ARK3116_SND(serial, 115, 0xFE, 0x40, 0x0002, 0x0003);
 345
 346         ARK3116_RCV(serial, 116, 0xFE, 0xC0, 0x0000, 0x0004, 0x03, buf);
 347         ARK3116_SND(serial, 117, 0xFE, 0x40, 0x0002, 0x0004);
 348
 349         ARK3116_RCV(serial, 118, 0xFE, 0xC0, 0x0000, 0x0004, 0x02, buf);
 350         ARK3116_SND(serial, 119, 0xFE, 0x40, 0x0000, 0x0004);
 351
 352         ARK3116_RCV(serial, 120, 0xFE, 0xC0, 0x0000, 0x0004, 0x00, buf);
 353
 354         ARK3116_SND(serial, 121, 0xFE, 0x40, 0x0001, 0x0004);
 355
 356         ARK3116_RCV(serial, 122, 0xFE, 0xC0, 0x0000, 0x0004, 0x01, buf);
 357
 358         ARK3116_SND(serial, 123, 0xFE, 0x40, 0x0003, 0x0004);
 359
 360         /* returns different values (control lines?!) */
 361         ARK3116_RCV(serial, 124, 0xFE, 0xC0, 0x0000, 0x0006, 0xFF, buf);
 362
 363         /* initialise termios */
 364         if (port->tty)
 365                 ark3116_set_termios(port, &tmp_termios);
 366
 367 err_out:
 368         kfree(buf);
 369
 370         return result;
 371 }
 372
 373 static int ark3116_ioctl(struct usb_serial_port *port, struct file *file,
 374                          unsigned int cmd, unsigned long arg)
 375 {
 376         struct serial_struct serstruct;
 377         void __user *user_arg = (void __user *)arg;
 378
 379         switch (cmd) {
 380         case TIOCGSERIAL:
 381                 /* XXX: Some of these values are probably wrong. */
 382                 memset(&serstruct, 0, sizeof (serstruct));
 383                 serstruct.type = PORT_16654;
 384                 serstruct.line = port->serial->minor;
 385                 serstruct.port = port->number;
 386                 serstruct.custom_divisor = 0;
 387                 serstruct.baud_base = 460800;
 388
 389                 if (copy_to_user(user_arg, &serstruct, sizeof (serstruct)))
 390                         return -EFAULT;
 391
 392                 return 0;
 393         case TIOCSSERIAL:
 394                 if (copy_from_user(&serstruct, user_arg, sizeof (serstruct)))
 395                         return -EFAULT;
 396                 return 0;
 397         default:
 398                 dbg("%s cmd 0x%04x not supported", __FUNCTION__, cmd);
 399                 break;
 400         }
 401
 402         return -ENOIOCTLCMD;
 403 }
 404
 405 static int ark3116_tiocmget(struct usb_serial_port *port, struct file *file)
 406 {
 407         struct usb_serial *serial = port->serial;
 408         char *buf;
 409         char temp;
 410
 411         /* seems like serial port status info (RTS, CTS, ...) is stored
 412          * in reg(?) 0x0006
 413          * pcb connection point 11 = GND -> sets bit4 of response
 414          * pcb connection point  7 = GND -> sets bit6 of response
 415          */
 416
 417         buf = kmalloc(1, GFP_KERNEL);
 418         if (!buf) {
 419                 dbg("error kmalloc");
 420                 return -ENOMEM;
 421         }
 422
 423         /* read register */
 424         ARK3116_RCV_QUIET(serial, 0xFE, 0xC0, 0x0000, 0x0006, buf);
 425         temp = buf[0];
 426         kfree(buf);
 427
 428         /* i do not really know if bit4=CTS and bit6=DSR... just a
 429          * quick guess!
 430          */
 431         return (temp & (1<<4) ? TIOCM_CTS : 0)
 432                | (temp & (1<<6) ? TIOCM_DSR : 0);
 433 }
 434
 435 static struct usb_driver ark3116_driver = {
 436         .name =         "ark3116",
 437         .probe =        usb_serial_probe,
 438         .disconnect =   usb_serial_disconnect,
 439         .id_table =     id_table,
 440         .no_dynamic_id =        1,
 441 };
 442
 443 static struct usb_serial_driver ark3116_device = {
 444         .driver = {
 445                 .owner =        THIS_MODULE,
 446                 .name =         "ark3116",
 447         },
 448         .id_table =             id_table,
 449         .usb_driver =           &ark3116_driver,
 450         .num_interrupt_in =     1,
 451         .num_bulk_in =          1,
 452         .num_bulk_out =         1,
 453         .num_ports =            1,
 454         .attach =               ark3116_attach,
 455         .set_termios =          ark3116_set_termios,
 456         .ioctl =                ark3116_ioctl,
 457         .tiocmget =             ark3116_tiocmget,
 458         .open =                 ark3116_open,
 459 };
 460
 461 static int __init ark3116_init(void)
 462 {
 463         int retval;
 464
 465         retval = usb_serial_register(&ark3116_device);
 466         if (retval)
 467                 return retval;
 468         retval = usb_register(&ark3116_driver);
 469         if (retval)
 470                 usb_serial_deregister(&ark3116_device);
 471         return retval;
 472 }
 473
 474 static void __exit ark3116_exit(void)
 475 {
 476         usb_deregister(&ark3116_driver);
 477         usb_serial_deregister(&ark3116_device);
 478 }
 479
 480 module_init(ark3116_init);
 481 module_exit(ark3116_exit);
 482 MODULE_LICENSE("GPL");
 483
 484 module_param(debug, bool, S_IRUGO | S_IWUSR);
 485 MODULE_PARM_DESC(debug, "Debug enabled or not");
 486