drivers/usb/host/sl811.h

   1 /*
   2  * SL811HS register declarations and HCD data structures
   3  *
   4  * Copyright (C) 2004 Psion Teklogix
   5  * Copyright (C) 2004 David Brownell
   6  * Copyright (C) 2001 Cypress Semiconductor Inc.
   7  */
   8
   9 /*
  10  * SL811HS has transfer registers, and control registers.  In host/master
  11  * mode one set of registers is used; in peripheral/slave mode, another.
  12  *  - SL11H only has some "A" transfer registers from 0x00-0x04
  13  *  - SL811HS also has "B" registers from 0x08-0x0c
  14  *  - SL811S (or HS in slave mode) has four A+B sets, at 00, 10, 20, 30
  15  */
  16
  17 #define SL811_EP_A(base)        ((base) + 0)
  18 #define SL811_EP_B(base)        ((base) + 8)
  19
  20 #define SL811_HOST_BUF          0x00
  21 #define SL811_PERIPH_EP0        0x00
  22 #define SL811_PERIPH_EP1        0x10
  23 #define SL811_PERIPH_EP2        0x20
  24 #define SL811_PERIPH_EP3        0x30
  25
  26
  27 /* TRANSFER REGISTERS:  host and peripheral sides are similar
  28  * except for the control models (master vs slave).
  29  */
  30 #define SL11H_HOSTCTLREG        0
  31 #       define SL11H_HCTLMASK_ARM       0x01
  32 #       define SL11H_HCTLMASK_ENABLE    0x02
  33 #       define SL11H_HCTLMASK_IN        0x00
  34 #       define SL11H_HCTLMASK_OUT       0x04
  35 #       define SL11H_HCTLMASK_ISOCH     0x10
  36 #       define SL11H_HCTLMASK_AFTERSOF  0x20
  37 #       define SL11H_HCTLMASK_TOGGLE    0x40
  38 #       define SL11H_HCTLMASK_PREAMBLE  0x80
  39 #define SL11H_BUFADDRREG        1
  40 #define SL11H_BUFLNTHREG        2
  41 #define SL11H_PKTSTATREG        3       /* read */
  42 #       define SL11H_STATMASK_ACK       0x01
  43 #       define SL11H_STATMASK_ERROR     0x02
  44 #       define SL11H_STATMASK_TMOUT     0x04
  45 #       define SL11H_STATMASK_SEQ       0x08
  46 #       define SL11H_STATMASK_SETUP     0x10
  47 #       define SL11H_STATMASK_OVF       0x20
  48 #       define SL11H_STATMASK_NAK       0x40
  49 #       define SL11H_STATMASK_STALL     0x80
  50 #define SL11H_PIDEPREG          3       /* write */
  51 #       define  SL_SETUP        0xd0
  52 #       define  SL_IN           0x90
  53 #       define  SL_OUT          0x10
  54 #       define  SL_SOF          0x50
  55 #       define  SL_PREAMBLE     0xc0
  56 #       define  SL_NAK          0xa0
  57 #       define  SL_STALL        0xe0
  58 #       define  SL_DATA0        0x30
  59 #       define  SL_DATA1        0xb0
  60 #define SL11H_XFERCNTREG        4       /* read */
  61 #define SL11H_DEVADDRREG        4       /* write */
  62
  63
  64 /* CONTROL REGISTERS:  host and peripheral are very different.
  65  */
  66 #define SL11H_CTLREG1           5
  67 #       define SL11H_CTL1MASK_SOF_ENA   0x01
  68 #       define SL11H_CTL1MASK_FORCE     0x18
  69 #               define SL11H_CTL1MASK_NORMAL    0x00
  70 #               define SL11H_CTL1MASK_SE0       0x08    /* reset */
  71 #               define SL11H_CTL1MASK_J         0x10
  72 #               define SL11H_CTL1MASK_K         0x18    /* resume */
  73 #       define SL11H_CTL1MASK_LSPD      0x20
  74 #       define SL11H_CTL1MASK_SUSPEND   0x40
  75 #define SL11H_IRQ_ENABLE        6
  76 #       define SL11H_INTMASK_DONE_A     0x01
  77 #       define SL11H_INTMASK_DONE_B     0x02
  78 #       define SL11H_INTMASK_SOFINTR    0x10
  79 #       define SL11H_INTMASK_INSRMV     0x20    /* to/from SE0 */
  80 #       define SL11H_INTMASK_RD         0x40
  81 #       define SL11H_INTMASK_DP         0x80    /* only in INTSTATREG */
  82 #define SL11S_ADDRESS           7
  83
  84 /* 0x08-0x0c are for the B buffer (not in SL11) */
  85
  86 #define SL11H_IRQ_STATUS        0x0D    /* write to ack */
  87 #define SL11H_HWREVREG          0x0E    /* read */
  88 #       define SL11H_HWRMASK_HWREV      0xF0
  89 #define SL11H_SOFLOWREG         0x0E    /* write */
  90 #define SL11H_SOFTMRREG         0x0F    /* read */
  91
  92 /* a write to this register enables SL811HS features.
  93  * HOST flag presumably overrides the chip input signal?
  94  */
  95 #define SL811HS_CTLREG2         0x0F
  96 #       define SL811HS_CTL2MASK_SOF_MASK        0x3F
  97 #       define SL811HS_CTL2MASK_DSWAP           0x40
  98 #       define SL811HS_CTL2MASK_HOST            0x80
  99
 100 #define SL811HS_CTL2_INIT       (SL811HS_CTL2MASK_HOST | 0x2e)
 101
 102
 103 /* DATA BUFFERS: registers from 0x10..0xff are for data buffers;
 104  * that's 240 bytes, which we'll split evenly between A and B sides.
 105  * Only ISO can use more than 64 bytes per packet.
 106  * (The SL11S has 0x40..0xff for buffers.)
 107  */
 108 #define H_MAXPACKET     120             /* bytes in A or B fifos */
 109
 110 #define SL11H_DATA_START        0x10
 111 #define SL811HS_PACKET_BUF(is_a)        ((is_a) \
 112                 ? SL11H_DATA_START \
 113                 : (SL11H_DATA_START + H_MAXPACKET))
 114
 115 /*-------------------------------------------------------------------------*/
 116
 117 #define LOG2_PERIODIC_SIZE      5       /* arbitrary; this matches OHCI */
 118 #define PERIODIC_SIZE           (1 << LOG2_PERIODIC_SIZE)
 119
 120 struct sl811 {
 121         spinlock_t              lock;
 122         void __iomem            *addr_reg;
 123         void __iomem            *data_reg;
 124         struct sl811_platform_data      *board;
 125         struct proc_dir_entry   *pde;
 126
 127         unsigned long           stat_insrmv;
 128         unsigned long           stat_wake;
 129         unsigned long           stat_sof;
 130         unsigned long           stat_a;
 131         unsigned long           stat_b;
 132         unsigned long           stat_lost;
 133         unsigned long           stat_overrun;
 134
 135         /* sw model */
 136         struct timer_list       timer;
 137         struct sl811h_ep        *next_periodic;
 138         struct sl811h_ep        *next_async;
 139
 140         struct sl811h_ep        *active_a;
 141         unsigned long           jiffies_a;
 142         struct sl811h_ep        *active_b;
 143         unsigned long           jiffies_b;
 144
 145         u32                     port1;
 146         u8                      ctrl1, ctrl2, irq_enable;
 147         u16                     frame;
 148
 149         /* async schedule: control, bulk */
 150         struct list_head        async;
 151
 152         /* periodic schedule: interrupt, iso */
 153         u16                     load[PERIODIC_SIZE];
 154         struct sl811h_ep        *periodic[PERIODIC_SIZE];
 155         unsigned                periodic_count;
 156 };
 157
 158 static inline struct sl811 *hcd_to_sl811(struct usb_hcd *hcd)
 159 {
 160         return (struct sl811 *) (hcd->hcd_priv);
 161 }
 162
 163 static inline struct usb_hcd *sl811_to_hcd(struct sl811 *sl811)
 164 {
 165         return container_of((void *) sl811, struct usb_hcd, hcd_priv);
 166 }
 167
 168 struct sl811h_ep {
 169         struct usb_host_endpoint *hep;
 170         struct usb_device       *udev;
 171
 172         u8                      defctrl;
 173         u8                      maxpacket;
 174         u8                      epnum;
 175         u8                      nextpid;
 176
 177         u16                     error_count;
 178         u16                     nak_count;
 179         u16                     length;         /* of current packet */
 180
 181         /* periodic schedule */
 182         u16                     period;
 183         u16                     branch;
 184         u16                     load;
 185         struct sl811h_ep        *next;
 186
 187         /* async schedule */
 188         struct list_head        schedule;
 189 };
 190
 191 /*-------------------------------------------------------------------------*/
 192
 193 /* These register utilities should work for the SL811S register API too
 194  * NOTE:  caller must hold sl811->lock.
 195  */
 196
 197 static inline u8 sl811_read(struct sl811 *sl811, int reg)
 198 {
 199         writeb(reg, sl811->addr_reg);
 200         return readb(sl811->data_reg);
 201 }
 202
 203 static inline void sl811_write(struct sl811 *sl811, int reg, u8 val)
 204 {
 205         writeb(reg, sl811->addr_reg);
 206         writeb(val, sl811->data_reg);
 207 }
 208
 209 static inline void
 210 sl811_write_buf(struct sl811 *sl811, int addr, const void *buf, size_t count)
 211 {
 212         const u8        *data;
 213         void __iomem    *data_reg;
 214
 215         if (!count)
 216                 return;
 217         writeb(addr, sl811->addr_reg);
 218
 219         data = buf;
 220         data_reg = sl811->data_reg;
 221         do {
 222                 writeb(*data++, data_reg);
 223         } while (--count);
 224 }
 225
 226 static inline void
 227 sl811_read_buf(struct sl811 *sl811, int addr, void *buf, size_t count)
 228 {
 229         u8              *data;
 230         void __iomem    *data_reg;
 231
 232         if (!count)
 233                 return;
 234         writeb(addr, sl811->addr_reg);
 235
 236         data = buf;
 237         data_reg = sl811->data_reg;
 238         do {
 239                 *data++ = readb(data_reg);
 240         } while (--count);
 241 }
 242
 243 /*-------------------------------------------------------------------------*/
 244
 245 #ifdef DEBUG
 246 #define DBG(stuff...)           printk(KERN_DEBUG "sl811: " stuff)
 247 #else
 248 #define DBG(stuff...)           do{}while(0)
 249 #endif
 250
 251 #ifdef VERBOSE
 252 #    define VDBG                DBG
 253 #else
 254 #    define VDBG(stuff...)      do{}while(0)
 255 #endif
 256
 257 #ifdef PACKET_TRACE
 258 #    define PACKET              VDBG
 259 #else
 260 #    define PACKET(stuff...)    do{}while(0)
 261 #endif
 262
 263 #define ERR(stuff...)           printk(KERN_ERR "sl811: " stuff)
 264 #define WARN(stuff...)          printk(KERN_WARNING "sl811: " stuff)
 265 #define INFO(stuff...)          printk(KERN_INFO "sl811: " stuff)
 266