x86: 64-bit, add the new split_large_page() function
[wrt350n-kernel.git] / net / tipc / core.c
blobd2d7d32c02c7bc4044065b695a43f138c591fab3
1 /*
2 * net/tipc/core.c: TIPC module code
4 * Copyright (c) 2003-2006, Ericsson AB
5 * Copyright (c) 2005-2006, Wind River Systems
6 * All rights reserved.
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions are met:
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
16 * 3. Neither the names of the copyright holders nor the names of its
17 * contributors may be used to endorse or promote products derived from
18 * this software without specific prior written permission.
20 * Alternatively, this software may be distributed under the terms of the
21 * GNU General Public License ("GPL") version 2 as published by the Free
22 * Software Foundation.
24 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
25 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
27 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
28 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
29 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
30 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
31 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
32 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
33 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
34 * POSSIBILITY OF SUCH DAMAGE.
37 #include <linux/init.h>
38 #include <linux/module.h>
39 #include <linux/kernel.h>
40 #include <linux/random.h>
42 #include "core.h"
43 #include "dbg.h"
44 #include "ref.h"
45 #include "net.h"
46 #include "user_reg.h"
47 #include "name_table.h"
48 #include "subscr.h"
49 #include "config.h"
51 int tipc_eth_media_start(void);
52 void tipc_eth_media_stop(void);
53 int tipc_handler_start(void);
54 void tipc_handler_stop(void);
55 int tipc_socket_init(void);
56 void tipc_socket_stop(void);
57 int tipc_netlink_start(void);
58 void tipc_netlink_stop(void);
60 #define TIPC_MOD_VER "1.6.2"
62 #ifndef CONFIG_TIPC_ZONES
63 #define CONFIG_TIPC_ZONES 3
64 #endif
66 #ifndef CONFIG_TIPC_CLUSTERS
67 #define CONFIG_TIPC_CLUSTERS 1
68 #endif
70 #ifndef CONFIG_TIPC_NODES
71 #define CONFIG_TIPC_NODES 255
72 #endif
74 #ifndef CONFIG_TIPC_SLAVE_NODES
75 #define CONFIG_TIPC_SLAVE_NODES 0
76 #endif
78 #ifndef CONFIG_TIPC_PORTS
79 #define CONFIG_TIPC_PORTS 8191
80 #endif
82 #ifndef CONFIG_TIPC_LOG
83 #define CONFIG_TIPC_LOG 0
84 #endif
86 /* global variables used by multiple sub-systems within TIPC */
88 int tipc_mode = TIPC_NOT_RUNNING;
89 int tipc_random;
90 atomic_t tipc_user_count = ATOMIC_INIT(0);
92 const char tipc_alphabet[] =
93 "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789_.";
95 /* configurable TIPC parameters */
97 u32 tipc_own_addr;
98 int tipc_max_zones;
99 int tipc_max_clusters;
100 int tipc_max_nodes;
101 int tipc_max_slaves;
102 int tipc_max_ports;
103 int tipc_max_subscriptions;
104 int tipc_max_publications;
105 int tipc_net_id;
106 int tipc_remote_management;
109 int tipc_get_mode(void)
111 return tipc_mode;
115 * tipc_core_stop_net - shut down TIPC networking sub-systems
118 void tipc_core_stop_net(void)
120 tipc_eth_media_stop();
121 tipc_net_stop();
125 * start_net - start TIPC networking sub-systems
128 int tipc_core_start_net(void)
130 int res;
132 if ((res = tipc_net_start()) ||
133 (res = tipc_eth_media_start())) {
134 tipc_core_stop_net();
136 return res;
140 * tipc_core_stop - switch TIPC from SINGLE NODE to NOT RUNNING mode
143 void tipc_core_stop(void)
145 if (tipc_mode != TIPC_NODE_MODE)
146 return;
148 tipc_mode = TIPC_NOT_RUNNING;
150 tipc_netlink_stop();
151 tipc_handler_stop();
152 tipc_cfg_stop();
153 tipc_subscr_stop();
154 tipc_reg_stop();
155 tipc_nametbl_stop();
156 tipc_ref_table_stop();
157 tipc_socket_stop();
161 * tipc_core_start - switch TIPC from NOT RUNNING to SINGLE NODE mode
164 int tipc_core_start(void)
166 int res;
168 if (tipc_mode != TIPC_NOT_RUNNING)
169 return -ENOPROTOOPT;
171 get_random_bytes(&tipc_random, sizeof(tipc_random));
172 tipc_mode = TIPC_NODE_MODE;
174 if ((res = tipc_handler_start()) ||
175 (res = tipc_ref_table_init(tipc_max_ports + tipc_max_subscriptions,
176 tipc_random)) ||
177 (res = tipc_reg_start()) ||
178 (res = tipc_nametbl_init()) ||
179 (res = tipc_k_signal((Handler)tipc_subscr_start, 0)) ||
180 (res = tipc_k_signal((Handler)tipc_cfg_init, 0)) ||
181 (res = tipc_netlink_start()) ||
182 (res = tipc_socket_init())) {
183 tipc_core_stop();
185 return res;
189 static int __init tipc_init(void)
191 int res;
193 tipc_log_reinit(CONFIG_TIPC_LOG);
194 info("Activated (version " TIPC_MOD_VER
195 " compiled " __DATE__ " " __TIME__ ")\n");
197 tipc_own_addr = 0;
198 tipc_remote_management = 1;
199 tipc_max_publications = 10000;
200 tipc_max_subscriptions = 2000;
201 tipc_max_ports = delimit(CONFIG_TIPC_PORTS, 127, 65536);
202 tipc_max_zones = delimit(CONFIG_TIPC_ZONES, 1, 255);
203 tipc_max_clusters = delimit(CONFIG_TIPC_CLUSTERS, 1, 1);
204 tipc_max_nodes = delimit(CONFIG_TIPC_NODES, 8, 2047);
205 tipc_max_slaves = delimit(CONFIG_TIPC_SLAVE_NODES, 0, 2047);
206 tipc_net_id = 4711;
208 if ((res = tipc_core_start()))
209 err("Unable to start in single node mode\n");
210 else
211 info("Started in single node mode\n");
212 return res;
215 static void __exit tipc_exit(void)
217 tipc_core_stop_net();
218 tipc_core_stop();
219 info("Deactivated\n");
220 tipc_log_stop();
223 module_init(tipc_init);
224 module_exit(tipc_exit);
226 MODULE_DESCRIPTION("TIPC: Transparent Inter Process Communication");
227 MODULE_LICENSE("Dual BSD/GPL");
228 MODULE_VERSION(TIPC_MOD_VER);
230 /* Native TIPC API for kernel-space applications (see tipc.h) */
232 EXPORT_SYMBOL(tipc_attach);
233 EXPORT_SYMBOL(tipc_detach);
234 EXPORT_SYMBOL(tipc_get_addr);
235 EXPORT_SYMBOL(tipc_get_mode);
236 EXPORT_SYMBOL(tipc_createport);
237 EXPORT_SYMBOL(tipc_deleteport);
238 EXPORT_SYMBOL(tipc_ownidentity);
239 EXPORT_SYMBOL(tipc_portimportance);
240 EXPORT_SYMBOL(tipc_set_portimportance);
241 EXPORT_SYMBOL(tipc_portunreliable);
242 EXPORT_SYMBOL(tipc_set_portunreliable);
243 EXPORT_SYMBOL(tipc_portunreturnable);
244 EXPORT_SYMBOL(tipc_set_portunreturnable);
245 EXPORT_SYMBOL(tipc_publish);
246 EXPORT_SYMBOL(tipc_withdraw);
247 EXPORT_SYMBOL(tipc_connect2port);
248 EXPORT_SYMBOL(tipc_disconnect);
249 EXPORT_SYMBOL(tipc_shutdown);
250 EXPORT_SYMBOL(tipc_isconnected);
251 EXPORT_SYMBOL(tipc_peer);
252 EXPORT_SYMBOL(tipc_ref_valid);
253 EXPORT_SYMBOL(tipc_send);
254 EXPORT_SYMBOL(tipc_send_buf);
255 EXPORT_SYMBOL(tipc_send2name);
256 EXPORT_SYMBOL(tipc_forward2name);
257 EXPORT_SYMBOL(tipc_send_buf2name);
258 EXPORT_SYMBOL(tipc_forward_buf2name);
259 EXPORT_SYMBOL(tipc_send2port);
260 EXPORT_SYMBOL(tipc_forward2port);
261 EXPORT_SYMBOL(tipc_send_buf2port);
262 EXPORT_SYMBOL(tipc_forward_buf2port);
263 EXPORT_SYMBOL(tipc_multicast);
264 /* EXPORT_SYMBOL(tipc_multicast_buf); not available yet */
265 EXPORT_SYMBOL(tipc_ispublished);
266 EXPORT_SYMBOL(tipc_available_nodes);
268 /* TIPC API for external bearers (see tipc_bearer.h) */
270 EXPORT_SYMBOL(tipc_block_bearer);
271 EXPORT_SYMBOL(tipc_continue);
272 EXPORT_SYMBOL(tipc_disable_bearer);
273 EXPORT_SYMBOL(tipc_enable_bearer);
274 EXPORT_SYMBOL(tipc_recv_msg);
275 EXPORT_SYMBOL(tipc_register_media);
277 /* TIPC API for external APIs (see tipc_port.h) */
279 EXPORT_SYMBOL(tipc_createport_raw);
280 EXPORT_SYMBOL(tipc_set_msg_option);
281 EXPORT_SYMBOL(tipc_reject_msg);
282 EXPORT_SYMBOL(tipc_send_buf_fast);
283 EXPORT_SYMBOL(tipc_acknowledge);
284 EXPORT_SYMBOL(tipc_get_port);
285 EXPORT_SYMBOL(tipc_get_handle);