m68knommu: move ColdFire pit.c to its own coldfire directory
[wrt350n-kernel.git] / arch / arm / kernel / ecard.c
blobf56d48c451ea8dc4438a92e0539de21a7b3fc100
1 /*
2 * linux/arch/arm/kernel/ecard.c
4 * Copyright 1995-2001 Russell King
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
10 * Find all installed expansion cards, and handle interrupts from them.
12 * Created from information from Acorns RiscOS3 PRMs
14 * 08-Dec-1996 RMK Added code for the 9'th expansion card - the ether
15 * podule slot.
16 * 06-May-1997 RMK Added blacklist for cards whose loader doesn't work.
17 * 12-Sep-1997 RMK Created new handling of interrupt enables/disables
18 * - cards can now register their own routine to control
19 * interrupts (recommended).
20 * 29-Sep-1997 RMK Expansion card interrupt hardware not being re-enabled
21 * on reset from Linux. (Caused cards not to respond
22 * under RiscOS without hard reset).
23 * 15-Feb-1998 RMK Added DMA support
24 * 12-Sep-1998 RMK Added EASI support
25 * 10-Jan-1999 RMK Run loaders in a simulated RISC OS environment.
26 * 17-Apr-1999 RMK Support for EASI Type C cycles.
28 #define ECARD_C
30 #include <linux/module.h>
31 #include <linux/kernel.h>
32 #include <linux/types.h>
33 #include <linux/sched.h>
34 #include <linux/interrupt.h>
35 #include <linux/completion.h>
36 #include <linux/reboot.h>
37 #include <linux/mm.h>
38 #include <linux/slab.h>
39 #include <linux/proc_fs.h>
40 #include <linux/device.h>
41 #include <linux/init.h>
42 #include <linux/mutex.h>
43 #include <linux/kthread.h>
44 #include <linux/io.h>
46 #include <asm/dma.h>
47 #include <asm/ecard.h>
48 #include <asm/hardware.h>
49 #include <asm/irq.h>
50 #include <asm/mmu_context.h>
51 #include <asm/mach/irq.h>
52 #include <asm/tlbflush.h>
54 #include "ecard.h"
56 #ifndef CONFIG_ARCH_RPC
57 #define HAVE_EXPMASK
58 #endif
60 struct ecard_request {
61 void (*fn)(struct ecard_request *);
62 ecard_t *ec;
63 unsigned int address;
64 unsigned int length;
65 unsigned int use_loader;
66 void *buffer;
67 struct completion *complete;
70 struct expcard_blacklist {
71 unsigned short manufacturer;
72 unsigned short product;
73 const char *type;
76 static ecard_t *cards;
77 static ecard_t *slot_to_expcard[MAX_ECARDS];
78 static unsigned int ectcr;
79 #ifdef HAS_EXPMASK
80 static unsigned int have_expmask;
81 #endif
83 /* List of descriptions of cards which don't have an extended
84 * identification, or chunk directories containing a description.
86 static struct expcard_blacklist __initdata blacklist[] = {
87 { MANU_ACORN, PROD_ACORN_ETHER1, "Acorn Ether1" }
90 asmlinkage extern int
91 ecard_loader_reset(unsigned long base, loader_t loader);
92 asmlinkage extern int
93 ecard_loader_read(int off, unsigned long base, loader_t loader);
95 static inline unsigned short ecard_getu16(unsigned char *v)
97 return v[0] | v[1] << 8;
100 static inline signed long ecard_gets24(unsigned char *v)
102 return v[0] | v[1] << 8 | v[2] << 16 | ((v[2] & 0x80) ? 0xff000000 : 0);
105 static inline ecard_t *slot_to_ecard(unsigned int slot)
107 return slot < MAX_ECARDS ? slot_to_expcard[slot] : NULL;
110 /* ===================== Expansion card daemon ======================== */
112 * Since the loader programs on the expansion cards need to be run
113 * in a specific environment, create a separate task with this
114 * environment up, and pass requests to this task as and when we
115 * need to.
117 * This should allow 99% of loaders to be called from Linux.
119 * From a security standpoint, we trust the card vendors. This
120 * may be a misplaced trust.
122 static void ecard_task_reset(struct ecard_request *req)
124 struct expansion_card *ec = req->ec;
125 struct resource *res;
127 res = ec->slot_no == 8
128 ? &ec->resource[ECARD_RES_MEMC]
129 : ec->easi
130 ? &ec->resource[ECARD_RES_EASI]
131 : &ec->resource[ECARD_RES_IOCSYNC];
133 ecard_loader_reset(res->start, ec->loader);
136 static void ecard_task_readbytes(struct ecard_request *req)
138 struct expansion_card *ec = req->ec;
139 unsigned char *buf = req->buffer;
140 unsigned int len = req->length;
141 unsigned int off = req->address;
143 if (ec->slot_no == 8) {
144 void __iomem *base = (void __iomem *)
145 ec->resource[ECARD_RES_MEMC].start;
148 * The card maintains an index which increments the address
149 * into a 4096-byte page on each access. We need to keep
150 * track of the counter.
152 static unsigned int index;
153 unsigned int page;
155 page = (off >> 12) * 4;
156 if (page > 256 * 4)
157 return;
159 off &= 4095;
162 * If we are reading offset 0, or our current index is
163 * greater than the offset, reset the hardware index counter.
165 if (off == 0 || index > off) {
166 writeb(0, base);
167 index = 0;
171 * Increment the hardware index counter until we get to the
172 * required offset. The read bytes are discarded.
174 while (index < off) {
175 readb(base + page);
176 index += 1;
179 while (len--) {
180 *buf++ = readb(base + page);
181 index += 1;
183 } else {
184 unsigned long base = (ec->easi
185 ? &ec->resource[ECARD_RES_EASI]
186 : &ec->resource[ECARD_RES_IOCSYNC])->start;
187 void __iomem *pbase = (void __iomem *)base;
189 if (!req->use_loader || !ec->loader) {
190 off *= 4;
191 while (len--) {
192 *buf++ = readb(pbase + off);
193 off += 4;
195 } else {
196 while(len--) {
198 * The following is required by some
199 * expansion card loader programs.
201 *(unsigned long *)0x108 = 0;
202 *buf++ = ecard_loader_read(off++, base,
203 ec->loader);
210 static DECLARE_WAIT_QUEUE_HEAD(ecard_wait);
211 static struct ecard_request *ecard_req;
212 static DEFINE_MUTEX(ecard_mutex);
215 * Set up the expansion card daemon's page tables.
217 static void ecard_init_pgtables(struct mm_struct *mm)
219 struct vm_area_struct vma;
221 /* We want to set up the page tables for the following mapping:
222 * Virtual Physical
223 * 0x03000000 0x03000000
224 * 0x03010000 unmapped
225 * 0x03210000 0x03210000
226 * 0x03400000 unmapped
227 * 0x08000000 0x08000000
228 * 0x10000000 unmapped
230 * FIXME: we don't follow this 100% yet.
232 pgd_t *src_pgd, *dst_pgd;
234 src_pgd = pgd_offset(mm, (unsigned long)IO_BASE);
235 dst_pgd = pgd_offset(mm, IO_START);
237 memcpy(dst_pgd, src_pgd, sizeof(pgd_t) * (IO_SIZE / PGDIR_SIZE));
239 src_pgd = pgd_offset(mm, EASI_BASE);
240 dst_pgd = pgd_offset(mm, EASI_START);
242 memcpy(dst_pgd, src_pgd, sizeof(pgd_t) * (EASI_SIZE / PGDIR_SIZE));
244 vma.vm_mm = mm;
246 flush_tlb_range(&vma, IO_START, IO_START + IO_SIZE);
247 flush_tlb_range(&vma, EASI_START, EASI_START + EASI_SIZE);
250 static int ecard_init_mm(void)
252 struct mm_struct * mm = mm_alloc();
253 struct mm_struct *active_mm = current->active_mm;
255 if (!mm)
256 return -ENOMEM;
258 current->mm = mm;
259 current->active_mm = mm;
260 activate_mm(active_mm, mm);
261 mmdrop(active_mm);
262 ecard_init_pgtables(mm);
263 return 0;
266 static int
267 ecard_task(void * unused)
270 * Allocate a mm. We're not a lazy-TLB kernel task since we need
271 * to set page table entries where the user space would be. Note
272 * that this also creates the page tables. Failure is not an
273 * option here.
275 if (ecard_init_mm())
276 panic("kecardd: unable to alloc mm\n");
278 while (1) {
279 struct ecard_request *req;
281 wait_event_interruptible(ecard_wait, ecard_req != NULL);
283 req = xchg(&ecard_req, NULL);
284 if (req != NULL) {
285 req->fn(req);
286 complete(req->complete);
292 * Wake the expansion card daemon to action our request.
294 * FIXME: The test here is not sufficient to detect if the
295 * kcardd is running.
297 static void ecard_call(struct ecard_request *req)
299 DECLARE_COMPLETION_ONSTACK(completion);
301 req->complete = &completion;
303 mutex_lock(&ecard_mutex);
304 ecard_req = req;
305 wake_up(&ecard_wait);
308 * Now wait for kecardd to run.
310 wait_for_completion(&completion);
311 mutex_unlock(&ecard_mutex);
314 /* ======================= Mid-level card control ===================== */
316 static void
317 ecard_readbytes(void *addr, ecard_t *ec, int off, int len, int useld)
319 struct ecard_request req;
321 req.fn = ecard_task_readbytes;
322 req.ec = ec;
323 req.address = off;
324 req.length = len;
325 req.use_loader = useld;
326 req.buffer = addr;
328 ecard_call(&req);
331 int ecard_readchunk(struct in_chunk_dir *cd, ecard_t *ec, int id, int num)
333 struct ex_chunk_dir excd;
334 int index = 16;
335 int useld = 0;
337 if (!ec->cid.cd)
338 return 0;
340 while(1) {
341 ecard_readbytes(&excd, ec, index, 8, useld);
342 index += 8;
343 if (c_id(&excd) == 0) {
344 if (!useld && ec->loader) {
345 useld = 1;
346 index = 0;
347 continue;
349 return 0;
351 if (c_id(&excd) == 0xf0) { /* link */
352 index = c_start(&excd);
353 continue;
355 if (c_id(&excd) == 0x80) { /* loader */
356 if (!ec->loader) {
357 ec->loader = kmalloc(c_len(&excd),
358 GFP_KERNEL);
359 if (ec->loader)
360 ecard_readbytes(ec->loader, ec,
361 (int)c_start(&excd),
362 c_len(&excd), useld);
363 else
364 return 0;
366 continue;
368 if (c_id(&excd) == id && num-- == 0)
369 break;
372 if (c_id(&excd) & 0x80) {
373 switch (c_id(&excd) & 0x70) {
374 case 0x70:
375 ecard_readbytes((unsigned char *)excd.d.string, ec,
376 (int)c_start(&excd), c_len(&excd),
377 useld);
378 break;
379 case 0x00:
380 break;
383 cd->start_offset = c_start(&excd);
384 memcpy(cd->d.string, excd.d.string, 256);
385 return 1;
388 /* ======================= Interrupt control ============================ */
390 static void ecard_def_irq_enable(ecard_t *ec, int irqnr)
392 #ifdef HAS_EXPMASK
393 if (irqnr < 4 && have_expmask) {
394 have_expmask |= 1 << irqnr;
395 __raw_writeb(have_expmask, EXPMASK_ENABLE);
397 #endif
400 static void ecard_def_irq_disable(ecard_t *ec, int irqnr)
402 #ifdef HAS_EXPMASK
403 if (irqnr < 4 && have_expmask) {
404 have_expmask &= ~(1 << irqnr);
405 __raw_writeb(have_expmask, EXPMASK_ENABLE);
407 #endif
410 static int ecard_def_irq_pending(ecard_t *ec)
412 return !ec->irqmask || readb(ec->irqaddr) & ec->irqmask;
415 static void ecard_def_fiq_enable(ecard_t *ec, int fiqnr)
417 panic("ecard_def_fiq_enable called - impossible");
420 static void ecard_def_fiq_disable(ecard_t *ec, int fiqnr)
422 panic("ecard_def_fiq_disable called - impossible");
425 static int ecard_def_fiq_pending(ecard_t *ec)
427 return !ec->fiqmask || readb(ec->fiqaddr) & ec->fiqmask;
430 static expansioncard_ops_t ecard_default_ops = {
431 ecard_def_irq_enable,
432 ecard_def_irq_disable,
433 ecard_def_irq_pending,
434 ecard_def_fiq_enable,
435 ecard_def_fiq_disable,
436 ecard_def_fiq_pending
440 * Enable and disable interrupts from expansion cards.
441 * (interrupts are disabled for these functions).
443 * They are not meant to be called directly, but via enable/disable_irq.
445 static void ecard_irq_unmask(unsigned int irqnr)
447 ecard_t *ec = slot_to_ecard(irqnr - 32);
449 if (ec) {
450 if (!ec->ops)
451 ec->ops = &ecard_default_ops;
453 if (ec->claimed && ec->ops->irqenable)
454 ec->ops->irqenable(ec, irqnr);
455 else
456 printk(KERN_ERR "ecard: rejecting request to "
457 "enable IRQs for %d\n", irqnr);
461 static void ecard_irq_mask(unsigned int irqnr)
463 ecard_t *ec = slot_to_ecard(irqnr - 32);
465 if (ec) {
466 if (!ec->ops)
467 ec->ops = &ecard_default_ops;
469 if (ec->ops && ec->ops->irqdisable)
470 ec->ops->irqdisable(ec, irqnr);
474 static struct irq_chip ecard_chip = {
475 .name = "ECARD",
476 .ack = ecard_irq_mask,
477 .mask = ecard_irq_mask,
478 .unmask = ecard_irq_unmask,
481 void ecard_enablefiq(unsigned int fiqnr)
483 ecard_t *ec = slot_to_ecard(fiqnr);
485 if (ec) {
486 if (!ec->ops)
487 ec->ops = &ecard_default_ops;
489 if (ec->claimed && ec->ops->fiqenable)
490 ec->ops->fiqenable(ec, fiqnr);
491 else
492 printk(KERN_ERR "ecard: rejecting request to "
493 "enable FIQs for %d\n", fiqnr);
497 void ecard_disablefiq(unsigned int fiqnr)
499 ecard_t *ec = slot_to_ecard(fiqnr);
501 if (ec) {
502 if (!ec->ops)
503 ec->ops = &ecard_default_ops;
505 if (ec->ops->fiqdisable)
506 ec->ops->fiqdisable(ec, fiqnr);
510 static void ecard_dump_irq_state(void)
512 ecard_t *ec;
514 printk("Expansion card IRQ state:\n");
516 for (ec = cards; ec; ec = ec->next) {
517 if (ec->slot_no == 8)
518 continue;
520 printk(" %d: %sclaimed, ",
521 ec->slot_no, ec->claimed ? "" : "not ");
523 if (ec->ops && ec->ops->irqpending &&
524 ec->ops != &ecard_default_ops)
525 printk("irq %spending\n",
526 ec->ops->irqpending(ec) ? "" : "not ");
527 else
528 printk("irqaddr %p, mask = %02X, status = %02X\n",
529 ec->irqaddr, ec->irqmask, readb(ec->irqaddr));
533 static void ecard_check_lockup(struct irq_desc *desc)
535 static unsigned long last;
536 static int lockup;
539 * If the timer interrupt has not run since the last million
540 * unrecognised expansion card interrupts, then there is
541 * something seriously wrong. Disable the expansion card
542 * interrupts so at least we can continue.
544 * Maybe we ought to start a timer to re-enable them some time
545 * later?
547 if (last == jiffies) {
548 lockup += 1;
549 if (lockup > 1000000) {
550 printk(KERN_ERR "\nInterrupt lockup detected - "
551 "disabling all expansion card interrupts\n");
553 desc->chip->mask(IRQ_EXPANSIONCARD);
554 ecard_dump_irq_state();
556 } else
557 lockup = 0;
560 * If we did not recognise the source of this interrupt,
561 * warn the user, but don't flood the user with these messages.
563 if (!last || time_after(jiffies, last + 5*HZ)) {
564 last = jiffies;
565 printk(KERN_WARNING "Unrecognised interrupt from backplane\n");
566 ecard_dump_irq_state();
570 static void
571 ecard_irq_handler(unsigned int irq, struct irq_desc *desc)
573 ecard_t *ec;
574 int called = 0;
576 desc->chip->mask(irq);
577 for (ec = cards; ec; ec = ec->next) {
578 int pending;
580 if (!ec->claimed || ec->irq == NO_IRQ || ec->slot_no == 8)
581 continue;
583 if (ec->ops && ec->ops->irqpending)
584 pending = ec->ops->irqpending(ec);
585 else
586 pending = ecard_default_ops.irqpending(ec);
588 if (pending) {
589 struct irq_desc *d = irq_desc + ec->irq;
590 desc_handle_irq(ec->irq, d);
591 called ++;
594 desc->chip->unmask(irq);
596 if (called == 0)
597 ecard_check_lockup(desc);
600 #ifdef HAS_EXPMASK
601 static unsigned char priority_masks[] =
603 0xf0, 0xf1, 0xf3, 0xf7, 0xff, 0xff, 0xff, 0xff
606 static unsigned char first_set[] =
608 0x00, 0x00, 0x01, 0x00, 0x02, 0x00, 0x01, 0x00,
609 0x03, 0x00, 0x01, 0x00, 0x02, 0x00, 0x01, 0x00
612 static void
613 ecard_irqexp_handler(unsigned int irq, struct irq_desc *desc)
615 const unsigned int statusmask = 15;
616 unsigned int status;
618 status = __raw_readb(EXPMASK_STATUS) & statusmask;
619 if (status) {
620 unsigned int slot = first_set[status];
621 ecard_t *ec = slot_to_ecard(slot);
623 if (ec->claimed) {
624 struct irq_desc *d = irq_desc + ec->irq;
626 * this ugly code is so that we can operate a
627 * prioritorising system:
629 * Card 0 highest priority
630 * Card 1
631 * Card 2
632 * Card 3 lowest priority
634 * Serial cards should go in 0/1, ethernet/scsi in 2/3
635 * otherwise you will lose serial data at high speeds!
637 desc_handle_irq(ec->irq, d);
638 } else {
639 printk(KERN_WARNING "card%d: interrupt from unclaimed "
640 "card???\n", slot);
641 have_expmask &= ~(1 << slot);
642 __raw_writeb(have_expmask, EXPMASK_ENABLE);
644 } else
645 printk(KERN_WARNING "Wild interrupt from backplane (masks)\n");
648 static int __init ecard_probeirqhw(void)
650 ecard_t *ec;
651 int found;
653 __raw_writeb(0x00, EXPMASK_ENABLE);
654 __raw_writeb(0xff, EXPMASK_STATUS);
655 found = (__raw_readb(EXPMASK_STATUS) & 15) == 0;
656 __raw_writeb(0xff, EXPMASK_ENABLE);
658 if (found) {
659 printk(KERN_DEBUG "Expansion card interrupt "
660 "management hardware found\n");
662 /* for each card present, set a bit to '1' */
663 have_expmask = 0x80000000;
665 for (ec = cards; ec; ec = ec->next)
666 have_expmask |= 1 << ec->slot_no;
668 __raw_writeb(have_expmask, EXPMASK_ENABLE);
671 return found;
673 #else
674 #define ecard_irqexp_handler NULL
675 #define ecard_probeirqhw() (0)
676 #endif
678 #ifndef IO_EC_MEMC8_BASE
679 #define IO_EC_MEMC8_BASE 0
680 #endif
682 unsigned int __ecard_address(ecard_t *ec, card_type_t type, card_speed_t speed)
684 unsigned long address = 0;
685 int slot = ec->slot_no;
687 if (ec->slot_no == 8)
688 return IO_EC_MEMC8_BASE;
690 ectcr &= ~(1 << slot);
692 switch (type) {
693 case ECARD_MEMC:
694 if (slot < 4)
695 address = IO_EC_MEMC_BASE + (slot << 12);
696 break;
698 case ECARD_IOC:
699 if (slot < 4)
700 address = IO_EC_IOC_BASE + (slot << 12);
701 #ifdef IO_EC_IOC4_BASE
702 else
703 address = IO_EC_IOC4_BASE + ((slot - 4) << 12);
704 #endif
705 if (address)
706 address += speed << 17;
707 break;
709 #ifdef IO_EC_EASI_BASE
710 case ECARD_EASI:
711 address = IO_EC_EASI_BASE + (slot << 22);
712 if (speed == ECARD_FAST)
713 ectcr |= 1 << slot;
714 break;
715 #endif
716 default:
717 break;
720 #ifdef IOMD_ECTCR
721 iomd_writeb(ectcr, IOMD_ECTCR);
722 #endif
723 return address;
726 static int ecard_prints(char *buffer, ecard_t *ec)
728 char *start = buffer;
730 buffer += sprintf(buffer, " %d: %s ", ec->slot_no,
731 ec->easi ? "EASI" : " ");
733 if (ec->cid.id == 0) {
734 struct in_chunk_dir incd;
736 buffer += sprintf(buffer, "[%04X:%04X] ",
737 ec->cid.manufacturer, ec->cid.product);
739 if (!ec->card_desc && ec->cid.cd &&
740 ecard_readchunk(&incd, ec, 0xf5, 0)) {
741 ec->card_desc = kmalloc(strlen(incd.d.string)+1, GFP_KERNEL);
743 if (ec->card_desc)
744 strcpy((char *)ec->card_desc, incd.d.string);
747 buffer += sprintf(buffer, "%s\n", ec->card_desc ? ec->card_desc : "*unknown*");
748 } else
749 buffer += sprintf(buffer, "Simple card %d\n", ec->cid.id);
751 return buffer - start;
754 static int get_ecard_dev_info(char *buf, char **start, off_t pos, int count)
756 ecard_t *ec = cards;
757 off_t at = 0;
758 int len, cnt;
760 cnt = 0;
761 while (ec && count > cnt) {
762 len = ecard_prints(buf, ec);
763 at += len;
764 if (at >= pos) {
765 if (!*start) {
766 *start = buf + (pos - (at - len));
767 cnt = at - pos;
768 } else
769 cnt += len;
770 buf += len;
772 ec = ec->next;
774 return (count > cnt) ? cnt : count;
777 static struct proc_dir_entry *proc_bus_ecard_dir = NULL;
779 static void ecard_proc_init(void)
781 proc_bus_ecard_dir = proc_mkdir("ecard", proc_bus);
782 create_proc_info_entry("devices", 0, proc_bus_ecard_dir,
783 get_ecard_dev_info);
786 #define ec_set_resource(ec,nr,st,sz) \
787 do { \
788 (ec)->resource[nr].name = ec->dev.bus_id; \
789 (ec)->resource[nr].start = st; \
790 (ec)->resource[nr].end = (st) + (sz) - 1; \
791 (ec)->resource[nr].flags = IORESOURCE_MEM; \
792 } while (0)
794 static void __init ecard_free_card(struct expansion_card *ec)
796 int i;
798 for (i = 0; i < ECARD_NUM_RESOURCES; i++)
799 if (ec->resource[i].flags)
800 release_resource(&ec->resource[i]);
802 kfree(ec);
805 static struct expansion_card *__init ecard_alloc_card(int type, int slot)
807 struct expansion_card *ec;
808 unsigned long base;
809 int i;
811 ec = kzalloc(sizeof(ecard_t), GFP_KERNEL);
812 if (!ec) {
813 ec = ERR_PTR(-ENOMEM);
814 goto nomem;
817 ec->slot_no = slot;
818 ec->easi = type == ECARD_EASI;
819 ec->irq = NO_IRQ;
820 ec->fiq = NO_IRQ;
821 ec->dma = NO_DMA;
822 ec->ops = &ecard_default_ops;
824 snprintf(ec->dev.bus_id, sizeof(ec->dev.bus_id), "ecard%d", slot);
825 ec->dev.parent = NULL;
826 ec->dev.bus = &ecard_bus_type;
827 ec->dev.dma_mask = &ec->dma_mask;
828 ec->dma_mask = (u64)0xffffffff;
829 ec->dev.coherent_dma_mask = ec->dma_mask;
831 if (slot < 4) {
832 ec_set_resource(ec, ECARD_RES_MEMC,
833 PODSLOT_MEMC_BASE + (slot << 14),
834 PODSLOT_MEMC_SIZE);
835 base = PODSLOT_IOC0_BASE + (slot << 14);
836 } else
837 base = PODSLOT_IOC4_BASE + ((slot - 4) << 14);
839 #ifdef CONFIG_ARCH_RPC
840 if (slot < 8) {
841 ec_set_resource(ec, ECARD_RES_EASI,
842 PODSLOT_EASI_BASE + (slot << 24),
843 PODSLOT_EASI_SIZE);
846 if (slot == 8) {
847 ec_set_resource(ec, ECARD_RES_MEMC, NETSLOT_BASE, NETSLOT_SIZE);
848 } else
849 #endif
851 for (i = 0; i <= ECARD_RES_IOCSYNC - ECARD_RES_IOCSLOW; i++)
852 ec_set_resource(ec, i + ECARD_RES_IOCSLOW,
853 base + (i << 19), PODSLOT_IOC_SIZE);
855 for (i = 0; i < ECARD_NUM_RESOURCES; i++) {
856 if (ec->resource[i].flags &&
857 request_resource(&iomem_resource, &ec->resource[i])) {
858 printk(KERN_ERR "%s: resource(s) not available\n",
859 ec->dev.bus_id);
860 ec->resource[i].end -= ec->resource[i].start;
861 ec->resource[i].start = 0;
862 ec->resource[i].flags = 0;
866 nomem:
867 return ec;
870 static ssize_t ecard_show_irq(struct device *dev, struct device_attribute *attr, char *buf)
872 struct expansion_card *ec = ECARD_DEV(dev);
873 return sprintf(buf, "%u\n", ec->irq);
876 static ssize_t ecard_show_dma(struct device *dev, struct device_attribute *attr, char *buf)
878 struct expansion_card *ec = ECARD_DEV(dev);
879 return sprintf(buf, "%u\n", ec->dma);
882 static ssize_t ecard_show_resources(struct device *dev, struct device_attribute *attr, char *buf)
884 struct expansion_card *ec = ECARD_DEV(dev);
885 char *str = buf;
886 int i;
888 for (i = 0; i < ECARD_NUM_RESOURCES; i++)
889 str += sprintf(str, "%08x %08x %08lx\n",
890 ec->resource[i].start,
891 ec->resource[i].end,
892 ec->resource[i].flags);
894 return str - buf;
897 static ssize_t ecard_show_vendor(struct device *dev, struct device_attribute *attr, char *buf)
899 struct expansion_card *ec = ECARD_DEV(dev);
900 return sprintf(buf, "%u\n", ec->cid.manufacturer);
903 static ssize_t ecard_show_device(struct device *dev, struct device_attribute *attr, char *buf)
905 struct expansion_card *ec = ECARD_DEV(dev);
906 return sprintf(buf, "%u\n", ec->cid.product);
909 static ssize_t ecard_show_type(struct device *dev, struct device_attribute *attr, char *buf)
911 struct expansion_card *ec = ECARD_DEV(dev);
912 return sprintf(buf, "%s\n", ec->easi ? "EASI" : "IOC");
915 static struct device_attribute ecard_dev_attrs[] = {
916 __ATTR(device, S_IRUGO, ecard_show_device, NULL),
917 __ATTR(dma, S_IRUGO, ecard_show_dma, NULL),
918 __ATTR(irq, S_IRUGO, ecard_show_irq, NULL),
919 __ATTR(resource, S_IRUGO, ecard_show_resources, NULL),
920 __ATTR(type, S_IRUGO, ecard_show_type, NULL),
921 __ATTR(vendor, S_IRUGO, ecard_show_vendor, NULL),
922 __ATTR_NULL,
926 int ecard_request_resources(struct expansion_card *ec)
928 int i, err = 0;
930 for (i = 0; i < ECARD_NUM_RESOURCES; i++) {
931 if (ecard_resource_end(ec, i) &&
932 !request_mem_region(ecard_resource_start(ec, i),
933 ecard_resource_len(ec, i),
934 ec->dev.driver->name)) {
935 err = -EBUSY;
936 break;
940 if (err) {
941 while (i--)
942 if (ecard_resource_end(ec, i))
943 release_mem_region(ecard_resource_start(ec, i),
944 ecard_resource_len(ec, i));
946 return err;
948 EXPORT_SYMBOL(ecard_request_resources);
950 void ecard_release_resources(struct expansion_card *ec)
952 int i;
954 for (i = 0; i < ECARD_NUM_RESOURCES; i++)
955 if (ecard_resource_end(ec, i))
956 release_mem_region(ecard_resource_start(ec, i),
957 ecard_resource_len(ec, i));
959 EXPORT_SYMBOL(ecard_release_resources);
961 void ecard_setirq(struct expansion_card *ec, const struct expansion_card_ops *ops, void *irq_data)
963 ec->irq_data = irq_data;
964 barrier();
965 ec->ops = ops;
967 EXPORT_SYMBOL(ecard_setirq);
969 void __iomem *ecardm_iomap(struct expansion_card *ec, unsigned int res,
970 unsigned long offset, unsigned long maxsize)
972 unsigned long start = ecard_resource_start(ec, res);
973 unsigned long end = ecard_resource_end(ec, res);
975 if (offset > (end - start))
976 return NULL;
978 start += offset;
979 if (maxsize && end - start > maxsize)
980 end = start + maxsize;
982 return devm_ioremap(&ec->dev, start, end - start);
984 EXPORT_SYMBOL(ecardm_iomap);
987 * Probe for an expansion card.
989 * If bit 1 of the first byte of the card is set, then the
990 * card does not exist.
992 static int __init
993 ecard_probe(int slot, card_type_t type)
995 ecard_t **ecp;
996 ecard_t *ec;
997 struct ex_ecid cid;
998 int i, rc;
1000 ec = ecard_alloc_card(type, slot);
1001 if (IS_ERR(ec)) {
1002 rc = PTR_ERR(ec);
1003 goto nomem;
1006 rc = -ENODEV;
1007 if ((ec->podaddr = ecard_address(ec, type, ECARD_SYNC)) == 0)
1008 goto nodev;
1010 cid.r_zero = 1;
1011 ecard_readbytes(&cid, ec, 0, 16, 0);
1012 if (cid.r_zero)
1013 goto nodev;
1015 ec->cid.id = cid.r_id;
1016 ec->cid.cd = cid.r_cd;
1017 ec->cid.is = cid.r_is;
1018 ec->cid.w = cid.r_w;
1019 ec->cid.manufacturer = ecard_getu16(cid.r_manu);
1020 ec->cid.product = ecard_getu16(cid.r_prod);
1021 ec->cid.country = cid.r_country;
1022 ec->cid.irqmask = cid.r_irqmask;
1023 ec->cid.irqoff = ecard_gets24(cid.r_irqoff);
1024 ec->cid.fiqmask = cid.r_fiqmask;
1025 ec->cid.fiqoff = ecard_gets24(cid.r_fiqoff);
1026 ec->fiqaddr =
1027 ec->irqaddr = (void __iomem *)ioaddr(ec->podaddr);
1029 if (ec->cid.is) {
1030 ec->irqmask = ec->cid.irqmask;
1031 ec->irqaddr += ec->cid.irqoff;
1032 ec->fiqmask = ec->cid.fiqmask;
1033 ec->fiqaddr += ec->cid.fiqoff;
1034 } else {
1035 ec->irqmask = 1;
1036 ec->fiqmask = 4;
1039 for (i = 0; i < ARRAY_SIZE(blacklist); i++)
1040 if (blacklist[i].manufacturer == ec->cid.manufacturer &&
1041 blacklist[i].product == ec->cid.product) {
1042 ec->card_desc = blacklist[i].type;
1043 break;
1047 * hook the interrupt handlers
1049 if (slot < 8) {
1050 ec->irq = 32 + slot;
1051 set_irq_chip(ec->irq, &ecard_chip);
1052 set_irq_handler(ec->irq, handle_level_irq);
1053 set_irq_flags(ec->irq, IRQF_VALID);
1056 #ifdef IO_EC_MEMC8_BASE
1057 if (slot == 8)
1058 ec->irq = 11;
1059 #endif
1060 #ifdef CONFIG_ARCH_RPC
1061 /* On RiscPC, only first two slots have DMA capability */
1062 if (slot < 2)
1063 ec->dma = 2 + slot;
1064 #endif
1066 for (ecp = &cards; *ecp; ecp = &(*ecp)->next);
1068 *ecp = ec;
1069 slot_to_expcard[slot] = ec;
1071 device_register(&ec->dev);
1073 return 0;
1075 nodev:
1076 ecard_free_card(ec);
1077 nomem:
1078 return rc;
1082 * Initialise the expansion card system.
1083 * Locate all hardware - interrupt management and
1084 * actual cards.
1086 static int __init ecard_init(void)
1088 struct task_struct *task;
1089 int slot, irqhw;
1091 task = kthread_run(ecard_task, NULL, "kecardd");
1092 if (IS_ERR(task)) {
1093 printk(KERN_ERR "Ecard: unable to create kernel thread: %ld\n",
1094 PTR_ERR(task));
1095 return PTR_ERR(task);
1098 printk("Probing expansion cards\n");
1100 for (slot = 0; slot < 8; slot ++) {
1101 if (ecard_probe(slot, ECARD_EASI) == -ENODEV)
1102 ecard_probe(slot, ECARD_IOC);
1105 #ifdef IO_EC_MEMC8_BASE
1106 ecard_probe(8, ECARD_IOC);
1107 #endif
1109 irqhw = ecard_probeirqhw();
1111 set_irq_chained_handler(IRQ_EXPANSIONCARD,
1112 irqhw ? ecard_irqexp_handler : ecard_irq_handler);
1114 ecard_proc_init();
1116 return 0;
1119 subsys_initcall(ecard_init);
1122 * ECARD "bus"
1124 static const struct ecard_id *
1125 ecard_match_device(const struct ecard_id *ids, struct expansion_card *ec)
1127 int i;
1129 for (i = 0; ids[i].manufacturer != 65535; i++)
1130 if (ec->cid.manufacturer == ids[i].manufacturer &&
1131 ec->cid.product == ids[i].product)
1132 return ids + i;
1134 return NULL;
1137 static int ecard_drv_probe(struct device *dev)
1139 struct expansion_card *ec = ECARD_DEV(dev);
1140 struct ecard_driver *drv = ECARD_DRV(dev->driver);
1141 const struct ecard_id *id;
1142 int ret;
1144 id = ecard_match_device(drv->id_table, ec);
1146 ecard_claim(ec);
1147 ret = drv->probe(ec, id);
1148 if (ret)
1149 ecard_release(ec);
1150 return ret;
1153 static int ecard_drv_remove(struct device *dev)
1155 struct expansion_card *ec = ECARD_DEV(dev);
1156 struct ecard_driver *drv = ECARD_DRV(dev->driver);
1158 drv->remove(ec);
1159 ecard_release(ec);
1162 * Restore the default operations. We ensure that the
1163 * ops are set before we change the data.
1165 ec->ops = &ecard_default_ops;
1166 barrier();
1167 ec->irq_data = NULL;
1169 return 0;
1173 * Before rebooting, we must make sure that the expansion card is in a
1174 * sensible state, so it can be re-detected. This means that the first
1175 * page of the ROM must be visible. We call the expansion cards reset
1176 * handler, if any.
1178 static void ecard_drv_shutdown(struct device *dev)
1180 struct expansion_card *ec = ECARD_DEV(dev);
1181 struct ecard_driver *drv = ECARD_DRV(dev->driver);
1182 struct ecard_request req;
1184 if (dev->driver) {
1185 if (drv->shutdown)
1186 drv->shutdown(ec);
1187 ecard_release(ec);
1191 * If this card has a loader, call the reset handler.
1193 if (ec->loader) {
1194 req.fn = ecard_task_reset;
1195 req.ec = ec;
1196 ecard_call(&req);
1200 int ecard_register_driver(struct ecard_driver *drv)
1202 drv->drv.bus = &ecard_bus_type;
1204 return driver_register(&drv->drv);
1207 void ecard_remove_driver(struct ecard_driver *drv)
1209 driver_unregister(&drv->drv);
1212 static int ecard_match(struct device *_dev, struct device_driver *_drv)
1214 struct expansion_card *ec = ECARD_DEV(_dev);
1215 struct ecard_driver *drv = ECARD_DRV(_drv);
1216 int ret;
1218 if (drv->id_table) {
1219 ret = ecard_match_device(drv->id_table, ec) != NULL;
1220 } else {
1221 ret = ec->cid.id == drv->id;
1224 return ret;
1227 struct bus_type ecard_bus_type = {
1228 .name = "ecard",
1229 .dev_attrs = ecard_dev_attrs,
1230 .match = ecard_match,
1231 .probe = ecard_drv_probe,
1232 .remove = ecard_drv_remove,
1233 .shutdown = ecard_drv_shutdown,
1236 static int ecard_bus_init(void)
1238 return bus_register(&ecard_bus_type);
1241 postcore_initcall(ecard_bus_init);
1243 EXPORT_SYMBOL(ecard_readchunk);
1244 EXPORT_SYMBOL(__ecard_address);
1245 EXPORT_SYMBOL(ecard_register_driver);
1246 EXPORT_SYMBOL(ecard_remove_driver);
1247 EXPORT_SYMBOL(ecard_bus_type);