2 * HP i8042 SDC + MSM-58321 BBRTC driver.
4 * Copyright (c) 2001 Brian S. Julin
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions, and the following disclaimer,
12 * without modification.
13 * 2. The name of the author may not be used to endorse or promote products
14 * derived from this software without specific prior written permission.
16 * Alternatively, this software may be distributed under the terms of the
17 * GNU General Public License ("GPL").
19 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
20 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
21 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
22 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
23 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
24 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
25 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
26 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
27 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
30 * System Device Controller Microprocessor Firmware Theory of Operation
31 * for Part Number 1820-4784 Revision B. Dwg No. A-1820-4784-2
32 * efirtc.c by Stephane Eranian/Hewlett Packard
36 #include <linux/hp_sdc.h>
37 #include <linux/errno.h>
38 #include <linux/types.h>
39 #include <linux/init.h>
40 #include <linux/module.h>
41 #include <linux/time.h>
42 #include <linux/miscdevice.h>
43 #include <linux/proc_fs.h>
44 #include <linux/poll.h>
45 #include <linux/rtc.h>
47 MODULE_AUTHOR("Brian S. Julin <bri@calyx.com>");
48 MODULE_DESCRIPTION("HP i8042 SDC + MSM-58321 RTC Driver");
49 MODULE_LICENSE("Dual BSD/GPL");
51 #define RTC_VERSION "1.10d"
53 static unsigned long epoch
= 2000;
55 static struct semaphore i8042tregs
;
57 static hp_sdc_irqhook hp_sdc_rtc_isr
;
59 static struct fasync_struct
*hp_sdc_rtc_async_queue
;
61 static DECLARE_WAIT_QUEUE_HEAD(hp_sdc_rtc_wait
);
63 static loff_t
hp_sdc_rtc_llseek(struct file
*file
, loff_t offset
, int origin
);
65 static ssize_t
hp_sdc_rtc_read(struct file
*file
, char *buf
,
66 size_t count
, loff_t
*ppos
);
68 static int hp_sdc_rtc_ioctl(struct inode
*inode
, struct file
*file
,
69 unsigned int cmd
, unsigned long arg
);
71 static unsigned int hp_sdc_rtc_poll(struct file
*file
, poll_table
*wait
);
73 static int hp_sdc_rtc_open(struct inode
*inode
, struct file
*file
);
74 static int hp_sdc_rtc_release(struct inode
*inode
, struct file
*file
);
75 static int hp_sdc_rtc_fasync (int fd
, struct file
*filp
, int on
);
77 static int hp_sdc_rtc_read_proc(char *page
, char **start
, off_t off
,
78 int count
, int *eof
, void *data
);
80 static void hp_sdc_rtc_isr (int irq
, void *dev_id
,
81 uint8_t status
, uint8_t data
)
86 static int hp_sdc_rtc_do_read_bbrtc (struct rtc_time
*rtctm
)
88 struct semaphore tsem
;
95 tseq
[i
++] = HP_SDC_ACT_DATAREG
|
96 HP_SDC_ACT_POSTCMD
| HP_SDC_ACT_DATAIN
;
97 tseq
[i
++] = 0x01; /* write i8042[0x70] */
98 tseq
[i
] = i
/ 7; /* BBRTC reg address */
100 tseq
[i
++] = HP_SDC_CMD_DO_RTCR
; /* Trigger command */
101 tseq
[i
++] = 2; /* expect 1 stat/dat pair back. */
102 i
++; i
++; /* buffer for stat/dat pair */
104 tseq
[84] |= HP_SDC_ACT_SEMAPHORE
;
107 t
.act
.semaphore
= &tsem
;
108 init_MUTEX_LOCKED(&tsem
);
110 if (hp_sdc_enqueue_transaction(&t
)) return -1;
112 down_interruptible(&tsem
); /* Put ourselves to sleep for results. */
114 /* Check for nonpresence of BBRTC */
115 if (!((tseq
[83] | tseq
[90] | tseq
[69] | tseq
[76] |
116 tseq
[55] | tseq
[62] | tseq
[34] | tseq
[41] |
117 tseq
[20] | tseq
[27] | tseq
[6] | tseq
[13]) & 0x0f))
120 memset(rtctm
, 0, sizeof(struct rtc_time
));
121 rtctm
->tm_year
= (tseq
[83] & 0x0f) + (tseq
[90] & 0x0f) * 10;
122 rtctm
->tm_mon
= (tseq
[69] & 0x0f) + (tseq
[76] & 0x0f) * 10;
123 rtctm
->tm_mday
= (tseq
[55] & 0x0f) + (tseq
[62] & 0x0f) * 10;
124 rtctm
->tm_wday
= (tseq
[48] & 0x0f);
125 rtctm
->tm_hour
= (tseq
[34] & 0x0f) + (tseq
[41] & 0x0f) * 10;
126 rtctm
->tm_min
= (tseq
[20] & 0x0f) + (tseq
[27] & 0x0f) * 10;
127 rtctm
->tm_sec
= (tseq
[6] & 0x0f) + (tseq
[13] & 0x0f) * 10;
132 static int hp_sdc_rtc_read_bbrtc (struct rtc_time
*rtctm
)
134 struct rtc_time tm
, tm_last
;
137 /* MSM-58321 has no read latch, so must read twice and compare. */
139 if (hp_sdc_rtc_do_read_bbrtc(&tm_last
)) return -1;
140 if (hp_sdc_rtc_do_read_bbrtc(&tm
)) return -1;
142 while (memcmp(&tm
, &tm_last
, sizeof(struct rtc_time
))) {
143 if (i
++ > 4) return -1;
144 memcpy(&tm_last
, &tm
, sizeof(struct rtc_time
));
145 if (hp_sdc_rtc_do_read_bbrtc(&tm
)) return -1;
148 memcpy(rtctm
, &tm
, sizeof(struct rtc_time
));
154 static int64_t hp_sdc_rtc_read_i8042timer (uint8_t loadcmd
, int numreg
)
156 hp_sdc_transaction t
;
158 HP_SDC_ACT_PRECMD
| HP_SDC_ACT_POSTCMD
| HP_SDC_ACT_DATAIN
,
160 HP_SDC_CMD_READ_T1
, 2, 0, 0,
161 HP_SDC_ACT_POSTCMD
| HP_SDC_ACT_DATAIN
,
162 HP_SDC_CMD_READ_T2
, 2, 0, 0,
163 HP_SDC_ACT_POSTCMD
| HP_SDC_ACT_DATAIN
,
164 HP_SDC_CMD_READ_T3
, 2, 0, 0,
165 HP_SDC_ACT_POSTCMD
| HP_SDC_ACT_DATAIN
,
166 HP_SDC_CMD_READ_T4
, 2, 0, 0,
167 HP_SDC_ACT_POSTCMD
| HP_SDC_ACT_DATAIN
,
168 HP_SDC_CMD_READ_T5
, 2, 0, 0
171 t
.endidx
= numreg
* 5;
174 tseq
[t
.endidx
- 4] |= HP_SDC_ACT_SEMAPHORE
; /* numreg assumed > 1 */
177 t
.act
.semaphore
= &i8042tregs
;
179 down_interruptible(&i8042tregs
); /* Sleep if output regs in use. */
181 if (hp_sdc_enqueue_transaction(&t
)) return -1;
183 down_interruptible(&i8042tregs
); /* Sleep until results come back. */
187 ((uint64_t)(tseq
[10]) << 8) | ((uint64_t)(tseq
[15]) << 16) |
188 ((uint64_t)(tseq
[20]) << 24) | ((uint64_t)(tseq
[25]) << 32));
192 /* Read the i8042 real-time clock */
193 static inline int hp_sdc_rtc_read_rt(struct timeval
*res
) {
198 raw
= hp_sdc_rtc_read_i8042timer(HP_SDC_CMD_LOAD_RT
, 5);
199 if (raw
< 0) return -1;
201 tenms
= (uint32_t)raw
& 0xffffff;
202 days
= (unsigned int)(raw
>> 24) & 0xffff;
204 res
->tv_usec
= (suseconds_t
)(tenms
% 100) * 10000;
205 res
->tv_sec
= (time_t)(tenms
/ 100) + days
* 86400;
211 /* Read the i8042 fast handshake timer */
212 static inline int hp_sdc_rtc_read_fhs(struct timeval
*res
) {
216 raw
= hp_sdc_rtc_read_i8042timer(HP_SDC_CMD_LOAD_FHS
, 2);
217 if (raw
< 0) return -1;
219 tenms
= (unsigned int)raw
& 0xffff;
221 res
->tv_usec
= (suseconds_t
)(tenms
% 100) * 10000;
222 res
->tv_sec
= (time_t)(tenms
/ 100);
228 /* Read the i8042 match timer (a.k.a. alarm) */
229 static inline int hp_sdc_rtc_read_mt(struct timeval
*res
) {
233 raw
= hp_sdc_rtc_read_i8042timer(HP_SDC_CMD_LOAD_MT
, 3);
234 if (raw
< 0) return -1;
236 tenms
= (uint32_t)raw
& 0xffffff;
238 res
->tv_usec
= (suseconds_t
)(tenms
% 100) * 10000;
239 res
->tv_sec
= (time_t)(tenms
/ 100);
245 /* Read the i8042 delay timer */
246 static inline int hp_sdc_rtc_read_dt(struct timeval
*res
) {
250 raw
= hp_sdc_rtc_read_i8042timer(HP_SDC_CMD_LOAD_DT
, 3);
251 if (raw
< 0) return -1;
253 tenms
= (uint32_t)raw
& 0xffffff;
255 res
->tv_usec
= (suseconds_t
)(tenms
% 100) * 10000;
256 res
->tv_sec
= (time_t)(tenms
/ 100);
262 /* Read the i8042 cycle timer (a.k.a. periodic) */
263 static inline int hp_sdc_rtc_read_ct(struct timeval
*res
) {
267 raw
= hp_sdc_rtc_read_i8042timer(HP_SDC_CMD_LOAD_CT
, 3);
268 if (raw
< 0) return -1;
270 tenms
= (uint32_t)raw
& 0xffffff;
272 res
->tv_usec
= (suseconds_t
)(tenms
% 100) * 10000;
273 res
->tv_sec
= (time_t)(tenms
/ 100);
279 /* Set the i8042 real-time clock */
280 static int hp_sdc_rtc_set_rt (struct timeval
*setto
)
284 hp_sdc_transaction t
;
286 HP_SDC_ACT_PRECMD
| HP_SDC_ACT_DATAOUT
,
287 HP_SDC_CMD_SET_RTMS
, 3, 0, 0, 0,
288 HP_SDC_ACT_PRECMD
| HP_SDC_ACT_DATAOUT
,
289 HP_SDC_CMD_SET_RTD
, 2, 0, 0
294 if (0xffff < setto
->tv_sec
/ 86400) return -1;
295 days
= setto
->tv_sec
/ 86400;
296 if (0xffff < setto
->tv_usec
/ 1000000 / 86400) return -1;
297 days
+= ((setto
->tv_sec
% 86400) + setto
->tv_usec
/ 1000000) / 86400;
298 if (days
> 0xffff) return -1;
300 if (0xffffff < setto
->tv_sec
) return -1;
301 tenms
= setto
->tv_sec
* 100;
302 if (0xffffff < setto
->tv_usec
/ 10000) return -1;
303 tenms
+= setto
->tv_usec
/ 10000;
304 if (tenms
> 0xffffff) return -1;
306 tseq
[3] = (uint8_t)(tenms
& 0xff);
307 tseq
[4] = (uint8_t)((tenms
>> 8) & 0xff);
308 tseq
[5] = (uint8_t)((tenms
>> 16) & 0xff);
310 tseq
[9] = (uint8_t)(days
& 0xff);
311 tseq
[10] = (uint8_t)((days
>> 8) & 0xff);
315 if (hp_sdc_enqueue_transaction(&t
)) return -1;
319 /* Set the i8042 fast handshake timer */
320 static int hp_sdc_rtc_set_fhs (struct timeval
*setto
)
323 hp_sdc_transaction t
;
325 HP_SDC_ACT_PRECMD
| HP_SDC_ACT_DATAOUT
,
326 HP_SDC_CMD_SET_FHS
, 2, 0, 0
331 if (0xffff < setto
->tv_sec
) return -1;
332 tenms
= setto
->tv_sec
* 100;
333 if (0xffff < setto
->tv_usec
/ 10000) return -1;
334 tenms
+= setto
->tv_usec
/ 10000;
335 if (tenms
> 0xffff) return -1;
337 tseq
[3] = (uint8_t)(tenms
& 0xff);
338 tseq
[4] = (uint8_t)((tenms
>> 8) & 0xff);
342 if (hp_sdc_enqueue_transaction(&t
)) return -1;
347 /* Set the i8042 match timer (a.k.a. alarm) */
348 #define hp_sdc_rtc_set_mt (setto) \
349 hp_sdc_rtc_set_i8042timer(setto, HP_SDC_CMD_SET_MT)
351 /* Set the i8042 delay timer */
352 #define hp_sdc_rtc_set_dt (setto) \
353 hp_sdc_rtc_set_i8042timer(setto, HP_SDC_CMD_SET_DT)
355 /* Set the i8042 cycle timer (a.k.a. periodic) */
356 #define hp_sdc_rtc_set_ct (setto) \
357 hp_sdc_rtc_set_i8042timer(setto, HP_SDC_CMD_SET_CT)
359 /* Set one of the i8042 3-byte wide timers */
360 static int hp_sdc_rtc_set_i8042timer (struct timeval
*setto
, uint8_t setcmd
)
363 hp_sdc_transaction t
;
365 HP_SDC_ACT_PRECMD
| HP_SDC_ACT_DATAOUT
,
371 if (0xffffff < setto
->tv_sec
) return -1;
372 tenms
= setto
->tv_sec
* 100;
373 if (0xffffff < setto
->tv_usec
/ 10000) return -1;
374 tenms
+= setto
->tv_usec
/ 10000;
375 if (tenms
> 0xffffff) return -1;
378 tseq
[3] = (uint8_t)(tenms
& 0xff);
379 tseq
[4] = (uint8_t)((tenms
>> 8) & 0xff);
380 tseq
[5] = (uint8_t)((tenms
>> 16) & 0xff);
384 if (hp_sdc_enqueue_transaction(&t
)) {
390 static loff_t
hp_sdc_rtc_llseek(struct file
*file
, loff_t offset
, int origin
)
395 static ssize_t
hp_sdc_rtc_read(struct file
*file
, char *buf
,
396 size_t count
, loff_t
*ppos
) {
399 if (count
< sizeof(unsigned long))
402 retval
= put_user(68, (unsigned long *)buf
);
406 static unsigned int hp_sdc_rtc_poll(struct file
*file
, poll_table
*wait
)
412 return POLLIN
| POLLRDNORM
;
416 static int hp_sdc_rtc_open(struct inode
*inode
, struct file
*file
)
421 static int hp_sdc_rtc_release(struct inode
*inode
, struct file
*file
)
423 /* Turn off interrupts? */
425 if (file
->f_flags
& FASYNC
) {
426 hp_sdc_rtc_fasync (-1, file
, 0);
432 static int hp_sdc_rtc_fasync (int fd
, struct file
*filp
, int on
)
434 return fasync_helper (fd
, filp
, on
, &hp_sdc_rtc_async_queue
);
437 static int hp_sdc_rtc_proc_output (char *buf
)
439 #define YN(bit) ("no")
440 #define NY(bit) ("yes")
445 memset(&tm
, 0, sizeof(struct rtc_time
));
449 if (hp_sdc_rtc_read_bbrtc(&tm
)) {
450 p
+= sprintf(p
, "BBRTC\t\t: READ FAILED!\n");
453 "rtc_time\t: %02d:%02d:%02d\n"
454 "rtc_date\t: %04d-%02d-%02d\n"
455 "rtc_epoch\t: %04lu\n",
456 tm
.tm_hour
, tm
.tm_min
, tm
.tm_sec
,
457 tm
.tm_year
+ 1900, tm
.tm_mon
+ 1,
461 if (hp_sdc_rtc_read_rt(&tv
)) {
462 p
+= sprintf(p
, "i8042 rtc\t: READ FAILED!\n");
464 p
+= sprintf(p
, "i8042 rtc\t: %ld.%02d seconds\n",
465 tv
.tv_sec
, tv
.tv_usec
/1000);
468 if (hp_sdc_rtc_read_fhs(&tv
)) {
469 p
+= sprintf(p
, "handshake\t: READ FAILED!\n");
471 p
+= sprintf(p
, "handshake\t: %ld.%02d seconds\n",
472 tv
.tv_sec
, tv
.tv_usec
/1000);
475 if (hp_sdc_rtc_read_mt(&tv
)) {
476 p
+= sprintf(p
, "alarm\t\t: READ FAILED!\n");
478 p
+= sprintf(p
, "alarm\t\t: %ld.%02d seconds\n",
479 tv
.tv_sec
, tv
.tv_usec
/1000);
482 if (hp_sdc_rtc_read_dt(&tv
)) {
483 p
+= sprintf(p
, "delay\t\t: READ FAILED!\n");
485 p
+= sprintf(p
, "delay\t\t: %ld.%02d seconds\n",
486 tv
.tv_sec
, tv
.tv_usec
/1000);
489 if (hp_sdc_rtc_read_ct(&tv
)) {
490 p
+= sprintf(p
, "periodic\t: READ FAILED!\n");
492 p
+= sprintf(p
, "periodic\t: %ld.%02d seconds\n",
493 tv
.tv_sec
, tv
.tv_usec
/1000);
500 "square_wave\t: %s\n"
503 "periodic_IRQ\t: %s\n"
504 "periodic_freq\t: %ld\n"
505 "batt_status\t: %s\n",
514 1 ? "okay" : "dead");
521 static int hp_sdc_rtc_read_proc(char *page
, char **start
, off_t off
,
522 int count
, int *eof
, void *data
)
524 int len
= hp_sdc_rtc_proc_output (page
);
525 if (len
<= off
+count
) *eof
= 1;
528 if (len
>count
) len
= count
;
533 static int hp_sdc_rtc_ioctl(struct inode
*inode
, struct file
*file
,
534 unsigned int cmd
, unsigned long arg
)
540 struct rtc_time wtime
;
541 struct timeval ttime
;
544 /* This needs major work. */
548 case RTC_AIE_OFF
: /* Mask alarm int. enab. bit */
549 case RTC_AIE_ON
: /* Allow alarm interrupts. */
550 case RTC_PIE_OFF
: /* Mask periodic int. enab. bit */
551 case RTC_PIE_ON
: /* Allow periodic ints */
552 case RTC_UIE_ON
: /* Allow ints for RTC updates. */
553 case RTC_UIE_OFF
: /* Allow ints for RTC updates. */
555 /* We cannot mask individual user timers and we
556 cannot tell them apart when they occur, so it
557 would be disingenuous to succeed these IOCTLs */
560 case RTC_ALM_READ
: /* Read the present alarm time */
562 if (hp_sdc_rtc_read_mt(&ttime
)) return -EFAULT
;
563 if (hp_sdc_rtc_read_bbrtc(&wtime
)) return -EFAULT
;
565 wtime
.tm_hour
= ttime
.tv_sec
/ 3600; ttime
.tv_sec
%= 3600;
566 wtime
.tm_min
= ttime
.tv_sec
/ 60; ttime
.tv_sec
%= 60;
567 wtime
.tm_sec
= ttime
.tv_sec
;
571 case RTC_IRQP_READ
: /* Read the periodic IRQ rate. */
573 return put_user(hp_sdc_rtc_freq
, (unsigned long *)arg
);
575 case RTC_IRQP_SET
: /* Set periodic IRQ rate. */
578 * The max we can do is 100Hz.
581 if ((arg
< 1) || (arg
> 100)) return -EINVAL
;
583 ttime
.tv_usec
= 1000000 / arg
;
584 if (hp_sdc_rtc_set_ct(&ttime
)) return -EFAULT
;
585 hp_sdc_rtc_freq
= arg
;
588 case RTC_ALM_SET
: /* Store a time into the alarm */
591 * This expects a struct hp_sdc_rtc_time. Writing 0xff means
592 * "don't care" or "match all" for PC timers. The HP SDC
593 * does not support that perk, but it could be emulated fairly
594 * easily. Only the tm_hour, tm_min and tm_sec are used.
595 * We could do it with 10ms accuracy with the HP SDC, if the
596 * rtc interface left us a way to do that.
598 struct hp_sdc_rtc_time alm_tm
;
600 if (copy_from_user(&alm_tm
, (struct hp_sdc_rtc_time
*)arg
,
601 sizeof(struct hp_sdc_rtc_time
)))
604 if (alm_tm
.tm_hour
> 23) return -EINVAL
;
605 if (alm_tm
.tm_min
> 59) return -EINVAL
;
606 if (alm_tm
.tm_sec
> 59) return -EINVAL
;
608 ttime
.sec
= alm_tm
.tm_hour
* 3600 +
609 alm_tm
.tm_min
* 60 + alm_tm
.tm_sec
;
611 if (hp_sdc_rtc_set_mt(&ttime
)) return -EFAULT
;
614 case RTC_RD_TIME
: /* Read the time/date from RTC */
616 if (hp_sdc_rtc_read_bbrtc(&wtime
)) return -EFAULT
;
619 case RTC_SET_TIME
: /* Set the RTC */
621 struct rtc_time hp_sdc_rtc_tm
;
622 unsigned char mon
, day
, hrs
, min
, sec
, leap_yr
;
625 if (!capable(CAP_SYS_TIME
))
627 if (copy_from_user(&hp_sdc_rtc_tm
, (struct rtc_time
*)arg
,
628 sizeof(struct rtc_time
)))
631 yrs
= hp_sdc_rtc_tm
.tm_year
+ 1900;
632 mon
= hp_sdc_rtc_tm
.tm_mon
+ 1; /* tm_mon starts at zero */
633 day
= hp_sdc_rtc_tm
.tm_mday
;
634 hrs
= hp_sdc_rtc_tm
.tm_hour
;
635 min
= hp_sdc_rtc_tm
.tm_min
;
636 sec
= hp_sdc_rtc_tm
.tm_sec
;
641 leap_yr
= ((!(yrs
% 4) && (yrs
% 100)) || !(yrs
% 400));
643 if ((mon
> 12) || (day
== 0))
645 if (day
> (days_in_mo
[mon
] + ((mon
== 2) && leap_yr
)))
647 if ((hrs
>= 24) || (min
>= 60) || (sec
>= 60))
650 if ((yrs
-= eH
) > 255) /* They are unsigned */
656 case RTC_EPOCH_READ
: /* Read the epoch. */
658 return put_user (epoch
, (unsigned long *)arg
);
660 case RTC_EPOCH_SET
: /* Set the epoch. */
663 * There were no RTC clocks before 1900.
667 if (!capable(CAP_SYS_TIME
))
676 return copy_to_user((void *)arg
, &wtime
, sizeof wtime
) ? -EFAULT
: 0;
680 static struct file_operations hp_sdc_rtc_fops
= {
681 .owner
= THIS_MODULE
,
682 .llseek
= hp_sdc_rtc_llseek
,
683 .read
= hp_sdc_rtc_read
,
684 .poll
= hp_sdc_rtc_poll
,
685 .ioctl
= hp_sdc_rtc_ioctl
,
686 .open
= hp_sdc_rtc_open
,
687 .release
= hp_sdc_rtc_release
,
688 .fasync
= hp_sdc_rtc_fasync
,
691 static struct miscdevice hp_sdc_rtc_dev
= {
694 .fops
= &hp_sdc_rtc_fops
697 static int __init
hp_sdc_rtc_init(void)
701 init_MUTEX(&i8042tregs
);
703 if ((ret
= hp_sdc_request_timer_irq(&hp_sdc_rtc_isr
)))
705 misc_register(&hp_sdc_rtc_dev
);
706 create_proc_read_entry ("driver/rtc", 0, 0,
707 hp_sdc_rtc_read_proc
, NULL
);
709 printk(KERN_INFO
"HP i8042 SDC + MSM-58321 RTC support loaded "
710 "(RTC v " RTC_VERSION
")\n");
715 static void __exit
hp_sdc_rtc_exit(void)
717 remove_proc_entry ("driver/rtc", NULL
);
718 misc_deregister(&hp_sdc_rtc_dev
);
719 hp_sdc_release_timer_irq(hp_sdc_rtc_isr
);
720 printk(KERN_INFO
"HP i8042 SDC + MSM-58321 RTC support unloaded\n");
723 module_init(hp_sdc_rtc_init
);
724 module_exit(hp_sdc_rtc_exit
);