3 * i2c tv tuner chip device driver
4 * controls all those simple 4-control-bytes style tuners.
6 #include <linux/delay.h>
8 #include <linux/videodev.h>
9 #include <media/tuner.h>
10 #include <media/v4l2-common.h>
11 #include <media/tuner-types.h>
12 #include "tuner-driver.h"
14 static int offset
= 0;
15 module_param(offset
, int, 0664);
16 MODULE_PARM_DESC(offset
,"Allows to specify an offset for tuner");
18 /* ---------------------------------------------------------------------- */
20 /* tv standard selection for Temic 4046 FM5
21 this value takes the low bits of control byte 2
22 from datasheet Rev.01, Feb.00
24 picture IF 38.9 38.9 38.9 33.95 38.9
25 sound 1 33.4 32.9 32.4 40.45 32.4
27 NICAM 33.05 32.348 33.05 33.05
29 #define TEMIC_SET_PAL_I 0x05
30 #define TEMIC_SET_PAL_DK 0x09
31 #define TEMIC_SET_PAL_L 0x0a // SECAM ?
32 #define TEMIC_SET_PAL_L2 0x0b // change IF !
33 #define TEMIC_SET_PAL_BG 0x0c
35 /* tv tuner system standard selection for Philips FQ1216ME
36 this value takes the low bits of control byte 2
37 from datasheet "1999 Nov 16" (supersedes "1999 Mar 23")
39 picture carrier 38.90 38.90 38.90 38.90 33.95
40 colour 34.47 34.47 34.47 34.47 38.38
41 sound 1 33.40 32.40 32.90 32.40 40.45
43 NICAM 33.05 33.05 32.35 33.05 39.80
45 #define PHILIPS_SET_PAL_I 0x01 /* Bit 2 always zero !*/
46 #define PHILIPS_SET_PAL_BGDK 0x09
47 #define PHILIPS_SET_PAL_L2 0x0a
48 #define PHILIPS_SET_PAL_L 0x0b
50 /* system switching for Philips FI1216MF MK2
51 from datasheet "1996 Jul 09",
53 picture carrier 38.90 38.90 33.95
54 colour 34.47 34.37 38.38
55 sound 1 33.40 32.40 40.45
57 NICAM 33.05 33.05 39.80
59 #define PHILIPS_MF_SET_STD_BG 0x01 /* Bit 2 must be zero, Bit 3 is system output */
60 #define PHILIPS_MF_SET_STD_L 0x03 /* Used on Secam France */
61 #define PHILIPS_MF_SET_STD_LC 0x02 /* Used on SECAM L' */
65 #define TUNER_RATIO_MASK 0x06 /* Bit cb1:cb2 */
66 #define TUNER_RATIO_SELECT_50 0x00
67 #define TUNER_RATIO_SELECT_32 0x02
68 #define TUNER_RATIO_SELECT_166 0x04
69 #define TUNER_RATIO_SELECT_62 0x06
71 #define TUNER_CHARGE_PUMP 0x40 /* Bit cb6 */
75 #define TUNER_POR 0x80
77 #define TUNER_MODE 0x38
78 #define TUNER_AFC 0x07
79 #define TUNER_SIGNAL 0x07
80 #define TUNER_STEREO 0x10
82 #define TUNER_PLL_LOCKED 0x40
83 #define TUNER_STEREO_MK3 0x04
85 /* ---------------------------------------------------------------------- */
87 static int tuner_getstatus(struct i2c_client
*c
)
91 if (1 != i2c_master_recv(c
,&byte
,1))
97 static int tuner_signal(struct i2c_client
*c
)
99 return (tuner_getstatus(c
) & TUNER_SIGNAL
) << 13;
102 static int tuner_stereo(struct i2c_client
*c
)
105 struct tuner
*t
= i2c_get_clientdata(c
);
107 status
= tuner_getstatus (c
);
110 case TUNER_PHILIPS_FM1216ME_MK3
:
111 case TUNER_PHILIPS_FM1236_MK3
:
112 case TUNER_PHILIPS_FM1256_IH3
:
113 case TUNER_LG_NTSC_TAPE
:
114 stereo
= ((status
& TUNER_SIGNAL
) == TUNER_STEREO_MK3
);
117 stereo
= status
& TUNER_STEREO
;
124 /* ---------------------------------------------------------------------- */
126 static void default_set_tv_freq(struct i2c_client
*c
, unsigned int freq
)
128 struct tuner
*t
= i2c_get_clientdata(c
);
129 u8 config
, cb
, tuneraddr
;
131 struct tunertype
*tun
;
133 int rc
, IFPCoff
, i
, j
;
134 enum param_type desired_type
;
135 struct tuner_params
*params
;
137 tun
= &tuners
[t
->type
];
139 /* IFPCoff = Video Intermediate Frequency - Vif:
140 940 =16*58.75 NTSC/J (Japan)
141 732 =16*45.75 M/N STD
142 704 =16*44 ATSC (at DVB code)
144 622.4=16*38.90 B/G D/K I, L STD
145 592 =16*37.00 D China
146 590 =16.36.875 B Australia
147 543.2=16*33.95 L' STD
148 171.2=16*10.70 FM Radio (at set_radio_freq)
151 if (t
->std
== V4L2_STD_NTSC_M_JP
) {
153 desired_type
= TUNER_PARAM_TYPE_NTSC
;
154 } else if ((t
->std
& V4L2_STD_MN
) &&
155 !(t
->std
& ~V4L2_STD_MN
)) {
157 desired_type
= TUNER_PARAM_TYPE_NTSC
;
158 } else if (t
->std
== V4L2_STD_SECAM_LC
) {
160 desired_type
= TUNER_PARAM_TYPE_SECAM
;
163 desired_type
= TUNER_PARAM_TYPE_PAL
;
166 for (j
= 0; j
< tun
->count
-1; j
++) {
167 if (desired_type
!= tun
->params
[j
].type
)
171 /* use default tuner_params if desired_type not available */
172 if (desired_type
!= tun
->params
[j
].type
) {
173 tuner_dbg("IFPCoff = %d: tuner_params undefined for tuner %d\n",
177 params
= &tun
->params
[j
];
179 for (i
= 0; i
< params
->count
; i
++) {
180 if (freq
> params
->ranges
[i
].limit
)
184 if (i
== params
->count
) {
185 tuner_dbg("TV frequency out of range (%d > %d)",
186 freq
, params
->ranges
[i
- 1].limit
);
187 freq
= params
->ranges
[--i
].limit
;
189 config
= params
->ranges
[i
].config
;
190 cb
= params
->ranges
[i
].cb
;
194 tuner_dbg("tv: param %d, range %d\n",j
,i
);
196 div
=freq
+ IFPCoff
+ offset
;
198 tuner_dbg("Freq= %d.%02d MHz, V_IF=%d.%02d MHz, Offset=%d.%02d MHz, div=%0d\n",
199 freq
/ 16, freq
% 16 * 100 / 16,
200 IFPCoff
/ 16, IFPCoff
% 16 * 100 / 16,
201 offset
/ 16, offset
% 16 * 100 / 16,
204 /* tv norm specific stuff for multi-norm tuners */
206 case TUNER_PHILIPS_SECAM
: // FI1216MF
207 /* 0x01 -> ??? no change ??? */
208 /* 0x02 -> PAL BDGHI / SECAM L */
209 /* 0x04 -> ??? PAL others / SECAM others ??? */
211 if (t
->std
& V4L2_STD_SECAM_L
) //also valid for V4L2_STD_SECAM
212 cb
|= PHILIPS_MF_SET_STD_L
;
213 else if (t
->std
& V4L2_STD_SECAM_LC
)
214 cb
|= PHILIPS_MF_SET_STD_LC
;
215 else /* V4L2_STD_B|V4L2_STD_GH */
216 cb
|= PHILIPS_MF_SET_STD_BG
;
219 case TUNER_TEMIC_4046FM5
:
222 if (t
->std
& V4L2_STD_PAL_BG
) {
223 cb
|= TEMIC_SET_PAL_BG
;
225 } else if (t
->std
& V4L2_STD_PAL_I
) {
226 cb
|= TEMIC_SET_PAL_I
;
228 } else if (t
->std
& V4L2_STD_PAL_DK
) {
229 cb
|= TEMIC_SET_PAL_DK
;
231 } else if (t
->std
& V4L2_STD_SECAM_L
) {
232 cb
|= TEMIC_SET_PAL_L
;
237 case TUNER_PHILIPS_FQ1216ME
:
240 if (t
->std
& (V4L2_STD_PAL_BG
|V4L2_STD_PAL_DK
)) {
241 cb
|= PHILIPS_SET_PAL_BGDK
;
243 } else if (t
->std
& V4L2_STD_PAL_I
) {
244 cb
|= PHILIPS_SET_PAL_I
;
246 } else if (t
->std
& V4L2_STD_SECAM_L
) {
247 cb
|= PHILIPS_SET_PAL_L
;
252 case TUNER_PHILIPS_ATSC
:
253 /* 0x00 -> ATSC antenna input 1 */
254 /* 0x01 -> ATSC antenna input 2 */
255 /* 0x02 -> NTSC antenna input 1 */
256 /* 0x03 -> NTSC antenna input 2 */
258 if (!(t
->std
& V4L2_STD_ATSC
))
263 case TUNER_MICROTUNE_4042FI5
:
264 /* Set the charge pump for fast tuning */
265 config
|= TUNER_CHARGE_PUMP
;
268 case TUNER_PHILIPS_TUV1236D
:
269 /* 0x40 -> ATSC antenna input 1 */
270 /* 0x48 -> ATSC antenna input 2 */
271 /* 0x00 -> NTSC antenna input 1 */
272 /* 0x08 -> NTSC antenna input 2 */
278 if (t
->std
& V4L2_STD_ATSC
) {
282 /* set to the correct mode (analog or digital) */
285 if (2 != (rc
= i2c_master_send(c
,&buffer
[0],2)))
286 tuner_warn("i2c i/o error: rc == %d (should be 2)\n",rc
);
287 if (2 != (rc
= i2c_master_send(c
,&buffer
[2],2)))
288 tuner_warn("i2c i/o error: rc == %d (should be 2)\n",rc
);
294 if (params
->cb_first_if_lower_freq
&& div
< t
->last_div
) {
297 buffer
[2] = (div
>>8) & 0x7f;
298 buffer
[3] = div
& 0xff;
300 buffer
[0] = (div
>>8) & 0x7f;
301 buffer
[1] = div
& 0xff;
306 if (params
->has_tda9887
) {
308 int is_secam_l
= (t
->std
& (V4L2_STD_SECAM_L
| V4L2_STD_SECAM_LC
)) &&
309 !(t
->std
& ~(V4L2_STD_SECAM_L
| V4L2_STD_SECAM_LC
));
311 if (t
->std
== V4L2_STD_SECAM_LC
) {
312 if (params
->port1_active
^ params
->port1_invert_for_secam_lc
)
313 config
|= TDA9887_PORT1_ACTIVE
;
314 if (params
->port2_active
^ params
->port2_invert_for_secam_lc
)
315 config
|= TDA9887_PORT2_ACTIVE
;
318 if (params
->port1_active
)
319 config
|= TDA9887_PORT1_ACTIVE
;
320 if (params
->port2_active
)
321 config
|= TDA9887_PORT2_ACTIVE
;
323 if (params
->intercarrier_mode
)
324 config
|= TDA9887_INTERCARRIER
;
326 if (i
== 0 && params
->default_top_secam_low
)
327 config
|= TDA9887_TOP(params
->default_top_secam_low
);
328 else if (i
== 1 && params
->default_top_secam_mid
)
329 config
|= TDA9887_TOP(params
->default_top_secam_mid
);
330 else if (params
->default_top_secam_high
)
331 config
|= TDA9887_TOP(params
->default_top_secam_high
);
334 if (i
== 0 && params
->default_top_low
)
335 config
|= TDA9887_TOP(params
->default_top_low
);
336 else if (i
== 1 && params
->default_top_mid
)
337 config
|= TDA9887_TOP(params
->default_top_mid
);
338 else if (params
->default_top_high
)
339 config
|= TDA9887_TOP(params
->default_top_high
);
341 if (params
->default_pll_gating_18
)
342 config
|= TDA9887_GATING_18
;
343 i2c_clients_command(c
->adapter
, TDA9887_SET_CONFIG
, &config
);
345 tuner_dbg("tv 0x%02x 0x%02x 0x%02x 0x%02x\n",
346 buffer
[0],buffer
[1],buffer
[2],buffer
[3]);
348 if (4 != (rc
= i2c_master_send(c
,buffer
,4)))
349 tuner_warn("i2c i/o error: rc == %d (should be 4)\n",rc
);
352 case TUNER_LG_TDVS_H06XF
:
353 /* Set the Auxiliary Byte. */
354 buffer
[0] = buffer
[2];
358 tuner_dbg("tv 0x%02x 0x%02x\n",buffer
[0],buffer
[1]);
360 if (2 != (rc
= i2c_master_send(c
,buffer
,2)))
361 tuner_warn("i2c i/o error: rc == %d (should be 2)\n",rc
);
363 case TUNER_MICROTUNE_4042FI5
:
365 // FIXME - this may also work for other tuners
366 unsigned long timeout
= jiffies
+ msecs_to_jiffies(1);
369 /* Wait until the PLL locks */
371 if (time_after(jiffies
,timeout
))
373 if (1 != (rc
= i2c_master_recv(c
,&status_byte
,1))) {
374 tuner_warn("i2c i/o read error: rc == %d (should be 1)\n",rc
);
377 if (status_byte
& TUNER_PLL_LOCKED
)
382 /* Set the charge pump for optimized phase noise figure */
383 config
&= ~TUNER_CHARGE_PUMP
;
384 buffer
[0] = (div
>>8) & 0x7f;
385 buffer
[1] = div
& 0xff;
388 tuner_dbg("tv 0x%02x 0x%02x 0x%02x 0x%02x\n",
389 buffer
[0],buffer
[1],buffer
[2],buffer
[3]);
391 if (4 != (rc
= i2c_master_send(c
,buffer
,4)))
392 tuner_warn("i2c i/o error: rc == %d (should be 4)\n",rc
);
398 static void default_set_radio_freq(struct i2c_client
*c
, unsigned int freq
)
400 struct tunertype
*tun
;
401 struct tuner
*t
= i2c_get_clientdata(c
);
405 enum param_type desired_type
= TUNER_PARAM_TYPE_RADIO
;
406 struct tuner_params
*params
;
408 tun
= &tuners
[t
->type
];
410 for (j
= 0; j
< tun
->count
-1; j
++) {
411 if (desired_type
!= tun
->params
[j
].type
)
415 /* use default tuner_params if desired_type not available */
416 if (desired_type
!= tun
->params
[j
].type
)
419 div
= (20 * freq
/ 16000) + (int)(20*10.7); /* IF 10.7 MHz */
420 params
= &tun
->params
[j
];
421 buffer
[2] = (params
->ranges
[0].config
& ~TUNER_RATIO_MASK
) | TUNER_RATIO_SELECT_50
; /* 50 kHz step */
424 case TUNER_TENA_9533_DI
:
425 case TUNER_YMEC_TVF_5533MF
:
426 tuner_dbg ("This tuner doesn't have FM. Most cards has a TEA5767 for FM\n");
428 case TUNER_PHILIPS_FM1216ME_MK3
:
429 case TUNER_PHILIPS_FM1236_MK3
:
430 case TUNER_PHILIPS_FMD1216ME_MK3
:
431 case TUNER_LG_NTSC_TAPE
:
434 case TUNER_TNF_5335MF
:
437 case TUNER_PHILIPS_FM1256_IH3
:
438 div
= (20 * freq
) / 16000 + (int)(33.3 * 20); /* IF 33.3 MHz */
441 case TUNER_LG_PAL_FM
:
444 case TUNER_MICROTUNE_4049FM5
:
445 div
= (20 * freq
) / 16000 + (int)(33.3 * 20); /* IF 33.3 MHz */
452 if (params
->cb_first_if_lower_freq
&& div
< t
->last_div
) {
453 buffer
[0] = buffer
[2];
454 buffer
[1] = buffer
[3];
455 buffer
[2] = (div
>>8) & 0x7f;
456 buffer
[3] = div
& 0xff;
458 buffer
[0] = (div
>>8) & 0x7f;
459 buffer
[1] = div
& 0xff;
462 tuner_dbg("radio 0x%02x 0x%02x 0x%02x 0x%02x\n",
463 buffer
[0],buffer
[1],buffer
[2],buffer
[3]);
466 if (params
->has_tda9887
) {
468 if (params
->port1_active
&& !params
->port1_fm_high_sensitivity
)
469 config
|= TDA9887_PORT1_ACTIVE
;
470 if (params
->port2_active
&& !params
->port2_fm_high_sensitivity
)
471 config
|= TDA9887_PORT2_ACTIVE
;
472 if (params
->intercarrier_mode
)
473 config
|= TDA9887_INTERCARRIER
;
474 /* if (params->port1_set_for_fm_mono)
475 config &= ~TDA9887_PORT1_ACTIVE;*/
476 if (params
->fm_gain_normal
)
477 config
|= TDA9887_GAIN_NORMAL
;
478 i2c_clients_command(c
->adapter
, TDA9887_SET_CONFIG
, &config
);
480 if (4 != (rc
= i2c_master_send(c
,buffer
,4)))
481 tuner_warn("i2c i/o error: rc == %d (should be 4)\n",rc
);
484 static struct tuner_operations simple_tuner_ops
= {
485 .set_tv_freq
= default_set_tv_freq
,
486 .set_radio_freq
= default_set_radio_freq
,
487 .has_signal
= tuner_signal
,
488 .is_stereo
= tuner_stereo
,
491 int default_tuner_init(struct i2c_client
*c
)
493 struct tuner
*t
= i2c_get_clientdata(c
);
495 tuner_info("type set to %d (%s)\n",
496 t
->type
, tuners
[t
->type
].name
);
497 strlcpy(c
->name
, tuners
[t
->type
].name
, sizeof(c
->name
));
499 memcpy(&t
->ops
, &simple_tuner_ops
, sizeof(struct tuner_operations
));
505 * Overrides for Emacs so that we follow Linus's tabbing style.
506 * ---------------------------------------------------------------------------