include/asm-arm/plat-s3c24xx/regs-spi.h

   1 /* linux/include/asm-arm/arch-s3c2410/regs-spi.h
   2  *
   3  * Copyright (c) 2004 Fetron GmbH
   4  *
   5  * This program is free software; you can redistribute it and/or modify
   6  * it under the terms of the GNU General Public License version 2 as
   7  * published by the Free Software Foundation.
   8  *
   9  * S3C2410 SPI register definition
  10 */
  11
  12 #ifndef __ASM_ARCH_REGS_SPI_H
  13 #define __ASM_ARCH_REGS_SPI_H
  14
  15 #define S3C2410_SPI1    (0x20)
  16 #define S3C2412_SPI1    (0x100)
  17
  18 #define S3C2410_SPCON   (0x00)
  19
  20 #define S3C2412_SPCON_RXFIFO_RB2        (0<<14)
  21 #define S3C2412_SPCON_RXFIFO_RB4        (1<<14)
  22 #define S3C2412_SPCON_RXFIFO_RB12       (2<<14)
  23 #define S3C2412_SPCON_RXFIFO_RB14       (3<<14)
  24 #define S3C2412_SPCON_TXFIFO_RB2        (0<<12)
  25 #define S3C2412_SPCON_TXFIFO_RB4        (1<<12)
  26 #define S3C2412_SPCON_TXFIFO_RB12       (2<<12)
  27 #define S3C2412_SPCON_TXFIFO_RB14       (3<<12)
  28 #define S3C2412_SPCON_RXFIFO_RESET      (1<<11) /* RxFIFO reset */
  29 #define S3C2412_SPCON_TXFIFO_RESET      (1<<10) /* TxFIFO reset */
  30 #define S3C2412_SPCON_RXFIFO_EN         (1<<9)  /* RxFIFO Enable */
  31 #define S3C2412_SPCON_TXFIFO_EN         (1<<8)  /* TxFIFO Enable */
  32
  33 #define S3C2412_SPCON_DIRC_RX     (1<<7)
  34
  35 #define S3C2410_SPCON_SMOD_DMA    (2<<5)        /* DMA mode */
  36 #define S3C2410_SPCON_SMOD_INT    (1<<5)        /* interrupt mode */
  37 #define S3C2410_SPCON_SMOD_POLL   (0<<5)        /* polling mode */
  38 #define S3C2410_SPCON_ENSCK       (1<<4)        /* Enable SCK */
  39 #define S3C2410_SPCON_MSTR        (1<<3)        /* Master/Slave select
  40                                                    0: slave, 1: master */
  41 #define S3C2410_SPCON_CPOL_HIGH   (1<<2)        /* Clock polarity select */
  42 #define S3C2410_SPCON_CPOL_LOW    (0<<2)        /* Clock polarity select */
  43
  44 #define S3C2410_SPCON_CPHA_FMTB   (1<<1)        /* Clock Phase Select */
  45 #define S3C2410_SPCON_CPHA_FMTA   (0<<1)        /* Clock Phase Select */
  46
  47 #define S3C2410_SPCON_TAGD        (1<<0)        /* Tx auto garbage data mode */
  48
  49
  50 #define S3C2410_SPSTA    (0x04)
  51
  52 #define S3C2412_SPSTA_RXFIFO_AE         (1<<11)
  53 #define S3C2412_SPSTA_TXFIFO_AE         (1<<10)
  54 #define S3C2412_SPSTA_RXFIFO_ERROR      (1<<9)
  55 #define S3C2412_SPSTA_TXFIFO_ERROR      (1<<8)
  56 #define S3C2412_SPSTA_RXFIFO_FIFO       (1<<7)
  57 #define S3C2412_SPSTA_RXFIFO_EMPTY      (1<<6)
  58 #define S3C2412_SPSTA_TXFIFO_NFULL      (1<<5)
  59 #define S3C2412_SPSTA_TXFIFO_EMPTY      (1<<4)
  60
  61 #define S3C2410_SPSTA_DCOL        (1<<2)        /* Data Collision Error */
  62 #define S3C2410_SPSTA_MULD        (1<<1)        /* Multi Master Error */
  63 #define S3C2410_SPSTA_READY       (1<<0)        /* Data Tx/Rx ready */
  64 #define S3C2412_SPSTA_READY_ORG   (1<<3)
  65
  66 #define S3C2410_SPPIN    (0x08)
  67
  68 #define S3C2410_SPPIN_ENMUL       (1<<2)        /* Multi Master Error detect */
  69 #define S3C2410_SPPIN_RESERVED    (1<<1)
  70 #define S3C2400_SPPIN_nCS         (1<<1)        /* SPI Card Select */
  71 #define S3C2410_SPPIN_KEEP        (1<<0)        /* Master Out keep */
  72
  73 #define S3C2410_SPPRE    (0x0C)
  74 #define S3C2410_SPTDAT   (0x10)
  75 #define S3C2410_SPRDAT   (0x14)
  76
  77 #define S3C2412_TXFIFO   (0x18)
  78 #define S3C2412_RXFIFO   (0x18)
  79 #define S3C2412_SPFIC    (0x24)
  80
  81
  82 #endif /* __ASM_ARCH_REGS_SPI_H */