include/acpi/acmacros.h

   1 /******************************************************************************
   2  *
   3  * Name: acmacros.h - C macros for the entire subsystem.
   4  *
   5  *****************************************************************************/
   6
   7 /*
   8  * Copyright (C) 2000 - 2007, R. Byron Moore
   9  * All rights reserved.
  10  *
  11  * Redistribution and use in source and binary forms, with or without
  12  * modification, are permitted provided that the following conditions
  13  * are met:
  14  * 1. Redistributions of source code must retain the above copyright
  15  *    notice, this list of conditions, and the following disclaimer,
  16  *    without modification.
  17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  18  *    substantially similar to the "NO WARRANTY" disclaimer below
  19  *    ("Disclaimer") and any redistribution must be conditioned upon
  20  *    including a substantially similar Disclaimer requirement for further
  21  *    binary redistribution.
  22  * 3. Neither the names of the above-listed copyright holders nor the names
  23  *    of any contributors may be used to endorse or promote products derived
  24  *    from this software without specific prior written permission.
  25  *
  26  * Alternatively, this software may be distributed under the terms of the
  27  * GNU General Public License ("GPL") version 2 as published by the Free
  28  * Software Foundation.
  29  *
  30  * NO WARRANTY
  31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  41  * POSSIBILITY OF SUCH DAMAGES.
  42  */
  43
  44 #ifndef __ACMACROS_H__
  45 #define __ACMACROS_H__
  46
  47 /*
  48  * Data manipulation macros
  49  */
  50 #define ACPI_LOWORD(l)                  ((u16)(u32)(l))
  51 #define ACPI_HIWORD(l)                  ((u16)((((u32)(l)) >> 16) & 0xFFFF))
  52 #define ACPI_LOBYTE(l)                  ((u8)(u16)(l))
  53 #define ACPI_HIBYTE(l)                  ((u8)((((u16)(l)) >> 8) & 0xFF))
  54
  55 #define ACPI_SET_BIT(target,bit)        ((target) |= (bit))
  56 #define ACPI_CLEAR_BIT(target,bit)      ((target) &= ~(bit))
  57 #define ACPI_MIN(a,b)                   (((a)<(b))?(a):(b))
  58 #define ACPI_MAX(a,b)                   (((a)>(b))?(a):(b))
  59
  60 /* Size calculation */
  61
  62 #define ACPI_ARRAY_LENGTH(x)            (sizeof(x) / sizeof((x)[0]))
  63
  64 #ifdef ACPI_NO_INTEGER64_SUPPORT
  65 /*
  66  * acpi_integer is 32-bits, no 64-bit support on this platform
  67  */
  68 #define ACPI_LODWORD(l)                 ((u32)(l))
  69 #define ACPI_HIDWORD(l)                 ((u32)(0))
  70
  71 #else
  72
  73 /*
  74  * Full 64-bit address/integer on both 32-bit and 64-bit platforms
  75  */
  76 #define ACPI_LODWORD(l)                 ((u32)(u64)(l))
  77 #define ACPI_HIDWORD(l)                 ((u32)(((*(struct uint64_struct *)(void *)(&l))).hi))
  78 #endif
  79
  80 /*
  81  * printf() format helpers
  82  */
  83
  84 /* Split 64-bit integer into two 32-bit values. Use with %8.8_x%8.8_x */
  85
  86 #define ACPI_FORMAT_UINT64(i)           ACPI_HIDWORD(i),ACPI_LODWORD(i)
  87
  88 /*
  89  * Extract data using a pointer.  Any more than a byte and we
  90  * get into potential aligment issues -- see the STORE macros below.
  91  * Use with care.
  92  */
  93 #define ACPI_GET8(ptr)                  *ACPI_CAST_PTR (u8, ptr)
  94 #define ACPI_GET16(ptr)                 *ACPI_CAST_PTR (u16, ptr)
  95 #define ACPI_GET32(ptr)                 *ACPI_CAST_PTR (u32, ptr)
  96 #define ACPI_GET64(ptr)                 *ACPI_CAST_PTR (u64, ptr)
  97 #define ACPI_SET8(ptr)                  *ACPI_CAST_PTR (u8, ptr)
  98 #define ACPI_SET16(ptr)                 *ACPI_CAST_PTR (u16, ptr)
  99 #define ACPI_SET32(ptr)                 *ACPI_CAST_PTR (u32, ptr)
 100 #define ACPI_SET64(ptr)                 *ACPI_CAST_PTR (u64, ptr)
 101
 102 /*
 103  * Pointer manipulation
 104  */
 105 #define ACPI_CAST_PTR(t, p)             ((t *) (acpi_uintptr_t) (p))
 106 #define ACPI_CAST_INDIRECT_PTR(t, p)    ((t **) (acpi_uintptr_t) (p))
 107 #define ACPI_ADD_PTR(t,a,b)             ACPI_CAST_PTR (t, (ACPI_CAST_PTR (u8,(a)) + (acpi_native_uint)(b)))
 108 #define ACPI_PTR_DIFF(a,b)              (acpi_native_uint) (ACPI_CAST_PTR (u8,(a)) - ACPI_CAST_PTR (u8,(b)))
 109
 110 /* Pointer/Integer type conversions */
 111
 112 #define ACPI_TO_POINTER(i)              ACPI_ADD_PTR (void,(void *) NULL,(acpi_native_uint) i)
 113 #define ACPI_TO_INTEGER(p)              ACPI_PTR_DIFF (p,(void *) NULL)
 114 #define ACPI_OFFSET(d,f)                (acpi_size) ACPI_PTR_DIFF (&(((d *)0)->f),(void *) NULL)
 115 #define ACPI_PHYSADDR_TO_PTR(i)         ACPI_TO_POINTER(i)
 116 #define ACPI_PTR_TO_PHYSADDR(i)         ACPI_TO_INTEGER(i)
 117
 118 #ifndef ACPI_MISALIGNMENT_NOT_SUPPORTED
 119 #define ACPI_COMPARE_NAME(a,b)          (*ACPI_CAST_PTR (u32,(a)) == *ACPI_CAST_PTR (u32,(b)))
 120 #else
 121 #define ACPI_COMPARE_NAME(a,b)          (!ACPI_STRNCMP (ACPI_CAST_PTR (char,(a)), ACPI_CAST_PTR (char,(b)), ACPI_NAME_SIZE))
 122 #endif
 123
 124 /*
 125  * Macros for moving data around to/from buffers that are possibly unaligned.
 126  * If the hardware supports the transfer of unaligned data, just do the store.
 127  * Otherwise, we have to move one byte at a time.
 128  */
 129 #ifdef ACPI_BIG_ENDIAN
 130 /*
 131  * Macros for big-endian machines
 132  */
 133
 134 /* This macro sets a buffer index, starting from the end of the buffer */
 135
 136 #define ACPI_BUFFER_INDEX(buf_len,buf_offset,byte_gran) ((buf_len) - (((buf_offset)+1) * (byte_gran)))
 137
 138 /* These macros reverse the bytes during the move, converting little-endian to big endian */
 139
 140          /* Big Endian      <==        Little Endian */
 141          /*  Hi...Lo                     Lo...Hi     */
 142 /* 16-bit source, 16/32/64 destination */
 143
 144 #define ACPI_MOVE_16_TO_16(d,s)         {((  u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[1];\
 145                           ((  u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[0];}
 146
 147 #define ACPI_MOVE_16_TO_32(d,s)         {(*(u32 *)(void *)(d))=0;\
 148                                           ((u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[1];\
 149                                           ((u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[0];}
 150
 151 #define ACPI_MOVE_16_TO_64(d,s)         {(*(u64 *)(void *)(d))=0;\
 152                                                            ((u8 *)(void *)(d))[6] = ((u8 *)(void *)(s))[1];\
 153                                                            ((u8 *)(void *)(d))[7] = ((u8 *)(void *)(s))[0];}
 154
 155 /* 32-bit source, 16/32/64 destination */
 156
 157 #define ACPI_MOVE_32_TO_16(d,s)         ACPI_MOVE_16_TO_16(d,s) /* Truncate to 16 */
 158
 159 #define ACPI_MOVE_32_TO_32(d,s)         {((  u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[3];\
 160                                                                           ((  u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[2];\
 161                                                                           ((  u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[1];\
 162                                                                           ((  u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[0];}
 163
 164 #define ACPI_MOVE_32_TO_64(d,s)         {(*(u64 *)(void *)(d))=0;\
 165                                                                                    ((u8 *)(void *)(d))[4] = ((u8 *)(void *)(s))[3];\
 166                                                                                    ((u8 *)(void *)(d))[5] = ((u8 *)(void *)(s))[2];\
 167                                                                                    ((u8 *)(void *)(d))[6] = ((u8 *)(void *)(s))[1];\
 168                                                                                    ((u8 *)(void *)(d))[7] = ((u8 *)(void *)(s))[0];}
 169
 170 /* 64-bit source, 16/32/64 destination */
 171
 172 #define ACPI_MOVE_64_TO_16(d,s)         ACPI_MOVE_16_TO_16(d,s) /* Truncate to 16 */
 173
 174 #define ACPI_MOVE_64_TO_32(d,s)         ACPI_MOVE_32_TO_32(d,s) /* Truncate to 32 */
 175
 176 #define ACPI_MOVE_64_TO_64(d,s)         {((  u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[7];\
 177                                                                                  ((  u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[6];\
 178                                                                                  ((  u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[5];\
 179                                                                                  ((  u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[4];\
 180                                                                                  ((  u8 *)(void *)(d))[4] = ((u8 *)(void *)(s))[3];\
 181                                                                                  ((  u8 *)(void *)(d))[5] = ((u8 *)(void *)(s))[2];\
 182                                                                                  ((  u8 *)(void *)(d))[6] = ((u8 *)(void *)(s))[1];\
 183                                                                                  ((  u8 *)(void *)(d))[7] = ((u8 *)(void *)(s))[0];}
 184 #else
 185 /*
 186  * Macros for little-endian machines
 187  */
 188
 189 /* This macro sets a buffer index, starting from the beginning of the buffer */
 190
 191 #define ACPI_BUFFER_INDEX(buf_len,buf_offset,byte_gran) (buf_offset)
 192
 193 #ifndef ACPI_MISALIGNMENT_NOT_SUPPORTED
 194
 195 /* The hardware supports unaligned transfers, just do the little-endian move */
 196
 197 /* 16-bit source, 16/32/64 destination */
 198
 199 #define ACPI_MOVE_16_TO_16(d,s)         *(u16 *)(void *)(d) = *(u16 *)(void *)(s)
 200 #define ACPI_MOVE_16_TO_32(d,s)         *(u32 *)(void *)(d) = *(u16 *)(void *)(s)
 201 #define ACPI_MOVE_16_TO_64(d,s)         *(u64 *)(void *)(d) = *(u16 *)(void *)(s)
 202
 203 /* 32-bit source, 16/32/64 destination */
 204
 205 #define ACPI_MOVE_32_TO_16(d,s)         ACPI_MOVE_16_TO_16(d,s) /* Truncate to 16 */
 206 #define ACPI_MOVE_32_TO_32(d,s)         *(u32 *)(void *)(d) = *(u32 *)(void *)(s)
 207 #define ACPI_MOVE_32_TO_64(d,s)         *(u64 *)(void *)(d) = *(u32 *)(void *)(s)
 208
 209 /* 64-bit source, 16/32/64 destination */
 210
 211 #define ACPI_MOVE_64_TO_16(d,s)         ACPI_MOVE_16_TO_16(d,s) /* Truncate to 16 */
 212 #define ACPI_MOVE_64_TO_32(d,s)         ACPI_MOVE_32_TO_32(d,s) /* Truncate to 32 */
 213 #define ACPI_MOVE_64_TO_64(d,s)         *(u64 *)(void *)(d) = *(u64 *)(void *)(s)
 214
 215 #else
 216 /*
 217  * The hardware does not support unaligned transfers.  We must move the
 218  * data one byte at a time.  These macros work whether the source or
 219  * the destination (or both) is/are unaligned.  (Little-endian move)
 220  */
 221
 222 /* 16-bit source, 16/32/64 destination */
 223
 224 #define ACPI_MOVE_16_TO_16(d,s)         {((  u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[0];\
 225                                                                                  ((  u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[1];}
 226
 227 #define ACPI_MOVE_16_TO_32(d,s)         {(*(u32 *)(void *)(d)) = 0; ACPI_MOVE_16_TO_16(d,s);}
 228 #define ACPI_MOVE_16_TO_64(d,s)         {(*(u64 *)(void *)(d)) = 0; ACPI_MOVE_16_TO_16(d,s);}
 229
 230 /* 32-bit source, 16/32/64 destination */
 231
 232 #define ACPI_MOVE_32_TO_16(d,s)         ACPI_MOVE_16_TO_16(d,s) /* Truncate to 16 */
 233
 234 #define ACPI_MOVE_32_TO_32(d,s)         {((  u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[0];\
 235                                                                                  ((  u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[1];\
 236                                                                                  ((  u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[2];\
 237                                                                                  ((  u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[3];}
 238
 239 #define ACPI_MOVE_32_TO_64(d,s)         {(*(u64 *)(void *)(d)) = 0; ACPI_MOVE_32_TO_32(d,s);}
 240
 241 /* 64-bit source, 16/32/64 destination */
 242
 243 #define ACPI_MOVE_64_TO_16(d,s)         ACPI_MOVE_16_TO_16(d,s) /* Truncate to 16 */
 244 #define ACPI_MOVE_64_TO_32(d,s)         ACPI_MOVE_32_TO_32(d,s) /* Truncate to 32 */
 245 #define ACPI_MOVE_64_TO_64(d,s)         {((  u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[0];\
 246                                                                                  ((  u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[1];\
 247                                                                                  ((  u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[2];\
 248                                                                                  ((  u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[3];\
 249                                                                                  ((  u8 *)(void *)(d))[4] = ((u8 *)(void *)(s))[4];\
 250                                                                                  ((  u8 *)(void *)(d))[5] = ((u8 *)(void *)(s))[5];\
 251                                                                                  ((  u8 *)(void *)(d))[6] = ((u8 *)(void *)(s))[6];\
 252                                                                                  ((  u8 *)(void *)(d))[7] = ((u8 *)(void *)(s))[7];}
 253 #endif
 254 #endif
 255
 256 /* Macros based on machine integer width */
 257
 258 #if ACPI_MACHINE_WIDTH == 32
 259 #define ACPI_MOVE_SIZE_TO_16(d,s)       ACPI_MOVE_32_TO_16(d,s)
 260
 261 #elif ACPI_MACHINE_WIDTH == 64
 262 #define ACPI_MOVE_SIZE_TO_16(d,s)       ACPI_MOVE_64_TO_16(d,s)
 263
 264 #else
 265 #error unknown ACPI_MACHINE_WIDTH
 266 #endif
 267
 268 /*
 269  * Fast power-of-two math macros for non-optimized compilers
 270  */
 271 #define _ACPI_DIV(value,power_of2)      ((u32) ((value) >> (power_of2)))
 272 #define _ACPI_MUL(value,power_of2)      ((u32) ((value) << (power_of2)))
 273 #define _ACPI_MOD(value,divisor)        ((u32) ((value) & ((divisor) -1)))
 274
 275 #define ACPI_DIV_2(a)                   _ACPI_DIV(a,1)
 276 #define ACPI_MUL_2(a)                   _ACPI_MUL(a,1)
 277 #define ACPI_MOD_2(a)                   _ACPI_MOD(a,2)
 278
 279 #define ACPI_DIV_4(a)                   _ACPI_DIV(a,2)
 280 #define ACPI_MUL_4(a)                   _ACPI_MUL(a,2)
 281 #define ACPI_MOD_4(a)                   _ACPI_MOD(a,4)
 282
 283 #define ACPI_DIV_8(a)                   _ACPI_DIV(a,3)
 284 #define ACPI_MUL_8(a)                   _ACPI_MUL(a,3)
 285 #define ACPI_MOD_8(a)                   _ACPI_MOD(a,8)
 286
 287 #define ACPI_DIV_16(a)                  _ACPI_DIV(a,4)
 288 #define ACPI_MUL_16(a)                  _ACPI_MUL(a,4)
 289 #define ACPI_MOD_16(a)                  _ACPI_MOD(a,16)
 290
 291 #define ACPI_DIV_32(a)                  _ACPI_DIV(a,5)
 292 #define ACPI_MUL_32(a)                  _ACPI_MUL(a,5)
 293 #define ACPI_MOD_32(a)                  _ACPI_MOD(a,32)
 294
 295 /*
 296  * Rounding macros (Power of two boundaries only)
 297  */
 298 #define ACPI_ROUND_DOWN(value,boundary)     (((acpi_native_uint)(value)) & \
 299                                                                                                 (~(((acpi_native_uint) boundary)-1)))
 300
 301 #define ACPI_ROUND_UP(value,boundary)       ((((acpi_native_uint)(value)) + \
 302                                                                                                 (((acpi_native_uint) boundary)-1)) & \
 303                                                                                                 (~(((acpi_native_uint) boundary)-1)))
 304
 305 /* Note: sizeof(acpi_native_uint) evaluates to either 2, 4, or 8 */
 306
 307 #define ACPI_ROUND_DOWN_TO_32BIT(a)         ACPI_ROUND_DOWN(a,4)
 308 #define ACPI_ROUND_DOWN_TO_64BIT(a)         ACPI_ROUND_DOWN(a,8)
 309 #define ACPI_ROUND_DOWN_TO_NATIVE_WORD(a)   ACPI_ROUND_DOWN(a,sizeof(acpi_native_uint))
 310
 311 #define ACPI_ROUND_UP_TO_32BIT(a)           ACPI_ROUND_UP(a,4)
 312 #define ACPI_ROUND_UP_TO_64BIT(a)           ACPI_ROUND_UP(a,8)
 313 #define ACPI_ROUND_UP_TO_NATIVE_WORD(a)     ACPI_ROUND_UP(a,sizeof(acpi_native_uint))
 314
 315 #define ACPI_ROUND_BITS_UP_TO_BYTES(a)      ACPI_DIV_8((a) + 7)
 316 #define ACPI_ROUND_BITS_DOWN_TO_BYTES(a)    ACPI_DIV_8((a))
 317
 318 #define ACPI_ROUND_UP_TO_1K(a)              (((a) + 1023) >> 10)
 319
 320 /* Generic (non-power-of-two) rounding */
 321
 322 #define ACPI_ROUND_UP_TO(value,boundary)    (((value) + ((boundary)-1)) / (boundary))
 323
 324 #define ACPI_IS_MISALIGNED(value)           (((acpi_native_uint)value) & (sizeof(acpi_native_uint)-1))
 325
 326 /*
 327  * Bitmask creation
 328  * Bit positions start at zero.
 329  * MASK_BITS_ABOVE creates a mask starting AT the position and above
 330  * MASK_BITS_BELOW creates a mask starting one bit BELOW the position
 331  */
 332 #define ACPI_MASK_BITS_ABOVE(position)      (~((ACPI_INTEGER_MAX) << ((u32) (position))))
 333 #define ACPI_MASK_BITS_BELOW(position)      ((ACPI_INTEGER_MAX) << ((u32) (position)))
 334
 335 #define ACPI_IS_OCTAL_DIGIT(d)              (((char)(d) >= '0') && ((char)(d) <= '7'))
 336
 337 /* Bitfields within ACPI registers */
 338
 339 #define ACPI_REGISTER_PREPARE_BITS(val, pos, mask)      ((val << pos) & mask)
 340 #define ACPI_REGISTER_INSERT_VALUE(reg, pos, mask, val)  reg = (reg & (~(mask))) | ACPI_REGISTER_PREPARE_BITS(val, pos, mask)
 341
 342 #define ACPI_INSERT_BITS(target, mask, source)          target = ((target & (~(mask))) | (source & mask))
 343
 344 /* Generate a UUID */
 345
 346 #define ACPI_INIT_UUID(a,b,c,d0,d1,d2,d3,d4,d5,d6,d7) \
 347         (a) & 0xFF, ((a) >> 8) & 0xFF, ((a) >> 16) & 0xFF, ((a) >> 24) & 0xFF, \
 348         (b) & 0xFF, ((b) >> 8) & 0xFF, \
 349         (c) & 0xFF, ((c) >> 8) & 0xFF, \
 350         (d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7)
 351
 352 /*
 353  * An struct acpi_namespace_node * can appear in some contexts,
 354  * where a pointer to an union acpi_operand_object    can also
 355  * appear.  This macro is used to distinguish them.
 356  *
 357  * The "Descriptor" field is the first field in both structures.
 358  */
 359 #define ACPI_GET_DESCRIPTOR_TYPE(d)     (((union acpi_descriptor *)(void *)(d))->common.descriptor_type)
 360 #define ACPI_SET_DESCRIPTOR_TYPE(d,t)   (((union acpi_descriptor *)(void *)(d))->common.descriptor_type = t)
 361
 362 /* Macro to test the object type */
 363
 364 #define ACPI_GET_OBJECT_TYPE(d)         (((union acpi_operand_object *)(void *)(d))->common.type)
 365
 366 /* Macro to check the table flags for SINGLE or MULTIPLE tables are allowed */
 367
 368 #define ACPI_IS_SINGLE_TABLE(x)         (((x) & 0x01) == ACPI_TABLE_SINGLE ? 1 : 0)
 369
 370 /*
 371  * Macros for the master AML opcode table
 372  */
 373 #if defined(ACPI_DISASSEMBLER) || defined (ACPI_DEBUG_OUTPUT)
 374 #define ACPI_OP(name,Pargs,Iargs,obj_type,class,type,flags)    {name,(u32)(Pargs),(u32)(Iargs),(u32)(flags),obj_type,class,type}
 375 #else
 376 #define ACPI_OP(name,Pargs,Iargs,obj_type,class,type,flags)    {(u32)(Pargs),(u32)(Iargs),(u32)(flags),obj_type,class,type}
 377 #endif
 378
 379 #ifdef ACPI_DISASSEMBLER
 380 #define ACPI_DISASM_ONLY_MEMBERS(a)     a;
 381 #else
 382 #define ACPI_DISASM_ONLY_MEMBERS(a)
 383 #endif
 384
 385 #define ARG_TYPE_WIDTH                  5
 386 #define ARG_1(x)                        ((u32)(x))
 387 #define ARG_2(x)                        ((u32)(x) << (1 * ARG_TYPE_WIDTH))
 388 #define ARG_3(x)                        ((u32)(x) << (2 * ARG_TYPE_WIDTH))
 389 #define ARG_4(x)                        ((u32)(x) << (3 * ARG_TYPE_WIDTH))
 390 #define ARG_5(x)                        ((u32)(x) << (4 * ARG_TYPE_WIDTH))
 391 #define ARG_6(x)                        ((u32)(x) << (5 * ARG_TYPE_WIDTH))
 392
 393 #define ARGI_LIST1(a)                   (ARG_1(a))
 394 #define ARGI_LIST2(a,b)                 (ARG_1(b)|ARG_2(a))
 395 #define ARGI_LIST3(a,b,c)               (ARG_1(c)|ARG_2(b)|ARG_3(a))
 396 #define ARGI_LIST4(a,b,c,d)             (ARG_1(d)|ARG_2(c)|ARG_3(b)|ARG_4(a))
 397 #define ARGI_LIST5(a,b,c,d,e)           (ARG_1(e)|ARG_2(d)|ARG_3(c)|ARG_4(b)|ARG_5(a))
 398 #define ARGI_LIST6(a,b,c,d,e,f)         (ARG_1(f)|ARG_2(e)|ARG_3(d)|ARG_4(c)|ARG_5(b)|ARG_6(a))
 399
 400 #define ARGP_LIST1(a)                   (ARG_1(a))
 401 #define ARGP_LIST2(a,b)                 (ARG_1(a)|ARG_2(b))
 402 #define ARGP_LIST3(a,b,c)               (ARG_1(a)|ARG_2(b)|ARG_3(c))
 403 #define ARGP_LIST4(a,b,c,d)             (ARG_1(a)|ARG_2(b)|ARG_3(c)|ARG_4(d))
 404 #define ARGP_LIST5(a,b,c,d,e)           (ARG_1(a)|ARG_2(b)|ARG_3(c)|ARG_4(d)|ARG_5(e))
 405 #define ARGP_LIST6(a,b,c,d,e,f)         (ARG_1(a)|ARG_2(b)|ARG_3(c)|ARG_4(d)|ARG_5(e)|ARG_6(f))
 406
 407 #define GET_CURRENT_ARG_TYPE(list)      (list & ((u32) 0x1F))
 408 #define INCREMENT_ARG_LIST(list)        (list >>= ((u32) ARG_TYPE_WIDTH))
 409
 410 #if defined (ACPI_DEBUG_OUTPUT) || !defined (ACPI_NO_ERROR_MESSAGES)
 411 /*
 412  * Module name is include in both debug and non-debug versions primarily for
 413  * error messages. The __FILE__ macro is not very useful for this, because it
 414  * often includes the entire pathname to the module
 415  */
 416 #define ACPI_MODULE_NAME(name)          static char ACPI_UNUSED_VAR *_acpi_module_name = name;
 417 #else
 418 #define ACPI_MODULE_NAME(name)
 419 #endif
 420
 421 /*
 422  * Ascii error messages can be configured out
 423  */
 424 #ifndef ACPI_NO_ERROR_MESSAGES
 425 #define AE_INFO                         _acpi_module_name, __LINE__
 426
 427 /*
 428  * Error reporting. Callers module and line number are inserted by AE_INFO,
 429  * the plist contains a set of parens to allow variable-length lists.
 430  * These macros are used for both the debug and non-debug versions of the code.
 431  */
 432 #define ACPI_INFO(plist)                acpi_ut_info plist
 433 #define ACPI_WARNING(plist)             acpi_ut_warning plist
 434 #define ACPI_EXCEPTION(plist)           acpi_ut_exception plist
 435 #define ACPI_ERROR(plist)               acpi_ut_error plist
 436 #define ACPI_ERROR_NAMESPACE(s,e)       acpi_ns_report_error (AE_INFO, s, e);
 437 #define ACPI_ERROR_METHOD(s,n,p,e)      acpi_ns_report_method_error (AE_INFO, s, n, p, e);
 438
 439 #else
 440
 441 /* No error messages */
 442
 443 #define ACPI_INFO(plist)
 444 #define ACPI_WARNING(plist)
 445 #define ACPI_EXCEPTION(plist)
 446 #define ACPI_ERROR(plist)
 447 #define ACPI_ERROR_NAMESPACE(s,e)
 448 #define ACPI_ERROR_METHOD(s,n,p,e)
 449 #endif
 450
 451 /*
 452  * Debug macros that are conditionally compiled
 453  */
 454 #ifdef ACPI_DEBUG_OUTPUT
 455
 456 /*
 457  * Common parameters used for debug output functions:
 458  * line number, function name, module(file) name, component ID
 459  */
 460 #define ACPI_DEBUG_PARAMETERS           __LINE__, ACPI_GET_FUNCTION_NAME, _acpi_module_name, _COMPONENT
 461
 462 /*
 463  * Function entry tracing
 464  */
 465
 466 /*
 467  * If ACPI_GET_FUNCTION_NAME was not defined in the compiler-dependent header,
 468  * define it now. This is the case where there the compiler does not support
 469  * a __FUNCTION__ macro or equivalent. We save the function name on the
 470  * local stack.
 471  */
 472 #ifndef ACPI_GET_FUNCTION_NAME
 473 #define ACPI_GET_FUNCTION_NAME          _acpi_function_name
 474 /*
 475  * The Name parameter should be the procedure name as a quoted string.
 476  * This is declared as a local string ("MyFunctionName") so that it can
 477  * be also used by the function exit macros below.
 478  * Note: (const char) is used to be compatible with the debug interfaces
 479  * and macros such as __FUNCTION__.
 480  */
 481 #define ACPI_FUNCTION_NAME(name)        const char *_acpi_function_name = #name;
 482
 483 #else
 484 /* Compiler supports __FUNCTION__ (or equivalent) -- Ignore this macro */
 485
 486 #define ACPI_FUNCTION_NAME(name)
 487 #endif
 488
 489 #ifdef DEBUG_FUNC_TRACE
 490
 491 #define ACPI_FUNCTION_TRACE(a)          ACPI_FUNCTION_NAME(a) \
 492                           acpi_ut_trace(ACPI_DEBUG_PARAMETERS)
 493 #define ACPI_FUNCTION_TRACE_PTR(a,b)    ACPI_FUNCTION_NAME(a) \
 494                                            acpi_ut_trace_ptr(ACPI_DEBUG_PARAMETERS,(void *)b)
 495 #define ACPI_FUNCTION_TRACE_U32(a,b)    ACPI_FUNCTION_NAME(a) \
 496                                                          acpi_ut_trace_u32(ACPI_DEBUG_PARAMETERS,(u32)b)
 497 #define ACPI_FUNCTION_TRACE_STR(a,b)    ACPI_FUNCTION_NAME(a) \
 498                                                                           acpi_ut_trace_str(ACPI_DEBUG_PARAMETERS,(char *)b)
 499
 500 #define ACPI_FUNCTION_ENTRY()           acpi_ut_track_stack_ptr()
 501
 502 /*
 503  * Function exit tracing.
 504  * WARNING: These macros include a return statement.  This is usually considered
 505  * bad form, but having a separate exit macro is very ugly and difficult to maintain.
 506  * One of the FUNCTION_TRACE macros above must be used in conjunction with these macros
 507  * so that "_AcpiFunctionName" is defined.
 508  *
 509  * Note: the DO_WHILE0 macro is used to prevent some compilers from complaining
 510  * about these constructs.
 511  */
 512 #ifdef ACPI_USE_DO_WHILE_0
 513 #define ACPI_DO_WHILE0(a)               do a while(0)
 514 #else
 515 #define ACPI_DO_WHILE0(a)               a
 516 #endif
 517
 518 #define return_VOID                     ACPI_DO_WHILE0 ({ \
 519                                                                                         acpi_ut_exit (ACPI_DEBUG_PARAMETERS); \
 520                                                                                         return;})
 521 /*
 522  * There are two versions of most of the return macros. The default version is
 523  * safer, since it avoids side-effects by guaranteeing that the argument will
 524  * not be evaluated twice.
 525  *
 526  * A less-safe version of the macros is provided for optional use if the
 527  * compiler uses excessive CPU stack (for example, this may happen in the
 528  * debug case if code optimzation is disabled.)
 529  */
 530 #ifndef ACPI_SIMPLE_RETURN_MACROS
 531
 532 #define return_ACPI_STATUS(s)           ACPI_DO_WHILE0 ({ \
 533                                                                                         register acpi_status _s = (s); \
 534                                                                                         acpi_ut_status_exit (ACPI_DEBUG_PARAMETERS, _s); \
 535                                                                                         return (_s); })
 536 #define return_PTR(s)                   ACPI_DO_WHILE0 ({ \
 537                                                                                         register void *_s = (void *) (s); \
 538                                                                                         acpi_ut_ptr_exit (ACPI_DEBUG_PARAMETERS, (u8 *) _s); \
 539                                                                                         return (_s); })
 540 #define return_VALUE(s)                 ACPI_DO_WHILE0 ({ \
 541                                                                                         register acpi_integer _s = (s); \
 542                                                                                         acpi_ut_value_exit (ACPI_DEBUG_PARAMETERS, _s); \
 543                                                                                         return (_s); })
 544 #define return_UINT8(s)                 ACPI_DO_WHILE0 ({ \
 545                                                                                         register u8 _s = (u8) (s); \
 546                                                                                         acpi_ut_value_exit (ACPI_DEBUG_PARAMETERS, (acpi_integer) _s); \
 547                                                                                         return (_s); })
 548 #define return_UINT32(s)                ACPI_DO_WHILE0 ({ \
 549                                                                                         register u32 _s = (u32) (s); \
 550                                                                                         acpi_ut_value_exit (ACPI_DEBUG_PARAMETERS, (acpi_integer) _s); \
 551                                                                                         return (_s); })
 552 #else                           /* Use original less-safe macros */
 553
 554 #define return_ACPI_STATUS(s)           ACPI_DO_WHILE0 ({ \
 555                                                                                         acpi_ut_status_exit (ACPI_DEBUG_PARAMETERS, (s)); \
 556                                                                                         return((s)); })
 557 #define return_PTR(s)                   ACPI_DO_WHILE0 ({ \
 558                                                                                         acpi_ut_ptr_exit (ACPI_DEBUG_PARAMETERS, (u8 *) (s)); \
 559                                                                                         return((s)); })
 560 #define return_VALUE(s)                 ACPI_DO_WHILE0 ({ \
 561                                                                                         acpi_ut_value_exit (ACPI_DEBUG_PARAMETERS, (acpi_integer) (s)); \
 562                                                                                         return((s)); })
 563 #define return_UINT8(s)                 return_VALUE(s)
 564 #define return_UINT32(s)                return_VALUE(s)
 565
 566 #endif                          /* ACPI_SIMPLE_RETURN_MACROS */
 567
 568 #else /* !DEBUG_FUNC_TRACE */
 569
 570 #define ACPI_FUNCTION_TRACE(a)
 571 #define ACPI_FUNCTION_TRACE_PTR(a,b)
 572 #define ACPI_FUNCTION_TRACE_U32(a,b)
 573 #define ACPI_FUNCTION_TRACE_STR(a,b)
 574 #define ACPI_FUNCTION_EXIT
 575 #define ACPI_FUNCTION_STATUS_EXIT(s)
 576 #define ACPI_FUNCTION_VALUE_EXIT(s)
 577 #define ACPI_FUNCTION_TRACE(a)
 578 #define ACPI_FUNCTION_ENTRY()
 579
 580 #define return_VOID                     return
 581 #define return_ACPI_STATUS(s)           return(s)
 582 #define return_VALUE(s)                 return(s)
 583 #define return_UINT8(s)                 return(s)
 584 #define return_UINT32(s)                return(s)
 585 #define return_PTR(s)                   return(s)
 586
 587 #endif /* DEBUG_FUNC_TRACE */
 588
 589 /* Conditional execution */
 590
 591 #define ACPI_DEBUG_EXEC(a)              a
 592 #define ACPI_NORMAL_EXEC(a)
 593
 594 #define ACPI_DEBUG_DEFINE(a)            a;
 595 #define ACPI_DEBUG_ONLY_MEMBERS(a)      a;
 596 #define _VERBOSE_STRUCTURES
 597
 598 /* Stack and buffer dumping */
 599
 600 #define ACPI_DUMP_STACK_ENTRY(a)        acpi_ex_dump_operand((a),0)
 601 #define ACPI_DUMP_OPERANDS(a,b,c,d,e)   acpi_ex_dump_operands(a,b,c,d,e,_acpi_module_name,__LINE__)
 602
 603 #define ACPI_DUMP_ENTRY(a,b)            acpi_ns_dump_entry (a,b)
 604 #define ACPI_DUMP_PATHNAME(a,b,c,d)     acpi_ns_dump_pathname(a,b,c,d)
 605 #define ACPI_DUMP_RESOURCE_LIST(a)      acpi_rs_dump_resource_list(a)
 606 #define ACPI_DUMP_BUFFER(a,b)           acpi_ut_dump_buffer((u8 *)a,b,DB_BYTE_DISPLAY,_COMPONENT)
 607
 608 /*
 609  * Master debug print macros
 610  * Print iff:
 611  *    1) Debug print for the current component is enabled
 612  *    2) Debug error level or trace level for the print statement is enabled
 613  */
 614 #define ACPI_DEBUG_PRINT(plist)         acpi_ut_debug_print plist
 615 #define ACPI_DEBUG_PRINT_RAW(plist)     acpi_ut_debug_print_raw plist
 616
 617 #else
 618 /*
 619  * This is the non-debug case -- make everything go away,
 620  * leaving no executable debug code!
 621  */
 622 #define ACPI_DEBUG_EXEC(a)
 623 #define ACPI_NORMAL_EXEC(a)             a;
 624
 625 #define ACPI_DEBUG_DEFINE(a)            do { } while(0)
 626 #define ACPI_DEBUG_ONLY_MEMBERS(a)      do { } while(0)
 627 #define ACPI_FUNCTION_NAME(a)           do { } while(0)
 628 #define ACPI_FUNCTION_TRACE(a)          do { } while(0)
 629 #define ACPI_FUNCTION_TRACE_PTR(a,b)    do { } while(0)
 630 #define ACPI_FUNCTION_TRACE_U32(a,b)    do { } while(0)
 631 #define ACPI_FUNCTION_TRACE_STR(a,b)    do { } while(0)
 632 #define ACPI_FUNCTION_EXIT              do { } while(0)
 633 #define ACPI_FUNCTION_STATUS_EXIT(s)    do { } while(0)
 634 #define ACPI_FUNCTION_VALUE_EXIT(s)     do { } while(0)
 635 #define ACPI_FUNCTION_ENTRY()           do { } while(0)
 636 #define ACPI_DUMP_STACK_ENTRY(a)        do { } while(0)
 637 #define ACPI_DUMP_OPERANDS(a,b,c,d,e)   do { } while(0)
 638 #define ACPI_DUMP_ENTRY(a,b)            do { } while(0)
 639 #define ACPI_DUMP_TABLES(a,b)           do { } while(0)
 640 #define ACPI_DUMP_PATHNAME(a,b,c,d)     do { } while(0)
 641 #define ACPI_DUMP_RESOURCE_LIST(a)      do { } while(0)
 642 #define ACPI_DUMP_BUFFER(a,b)           do { } while(0)
 643 #define ACPI_DEBUG_PRINT(pl)            do { } while(0)
 644 #define ACPI_DEBUG_PRINT_RAW(pl)        do { } while(0)
 645
 646 #define return_VOID                     return
 647 #define return_ACPI_STATUS(s)           return(s)
 648 #define return_VALUE(s)                 return(s)
 649 #define return_UINT8(s)                 return(s)
 650 #define return_UINT32(s)                return(s)
 651 #define return_PTR(s)                   return(s)
 652
 653 #endif
 654
 655 /*
 656  * Some code only gets executed when the debugger is built in.
 657  * Note that this is entirely independent of whether the
 658  * DEBUG_PRINT stuff (set by ACPI_DEBUG_OUTPUT) is on, or not.
 659  */
 660 #ifdef ACPI_DEBUGGER
 661 #define ACPI_DEBUGGER_EXEC(a)           a
 662 #else
 663 #define ACPI_DEBUGGER_EXEC(a)
 664 #endif
 665
 666 #ifdef ACPI_DEBUG_OUTPUT
 667 /*
 668  * 1) Set name to blanks
 669  * 2) Copy the object name
 670  */
 671 #define ACPI_ADD_OBJECT_NAME(a,b)       ACPI_MEMSET (a->common.name, ' ', sizeof (a->common.name));\
 672                                                                                 ACPI_STRNCPY (a->common.name, acpi_gbl_ns_type_names[b], sizeof (a->common.name))
 673 #else
 674
 675 #define ACPI_ADD_OBJECT_NAME(a,b)
 676 #endif
 677
 678 /*
 679  * Memory allocation tracking (DEBUG ONLY)
 680  */
 681 #ifndef ACPI_DBG_TRACK_ALLOCATIONS
 682
 683 /* Memory allocation */
 684
 685 #ifndef ACPI_ALLOCATE
 686 #define ACPI_ALLOCATE(a)            acpi_ut_allocate((acpi_size)(a),_COMPONENT,_acpi_module_name,__LINE__)
 687 #endif
 688 #ifndef ACPI_ALLOCATE_ZEROED
 689 #define ACPI_ALLOCATE_ZEROED(a)     acpi_ut_allocate_zeroed((acpi_size)(a), _COMPONENT,_acpi_module_name,__LINE__)
 690 #endif
 691 #ifndef ACPI_FREE
 692 #define ACPI_FREE(a)                acpio_os_free(a)
 693 #endif
 694 #define ACPI_MEM_TRACKING(a)
 695
 696 #else
 697
 698 /* Memory allocation */
 699
 700 #define ACPI_ALLOCATE(a)            acpi_ut_allocate_and_track((acpi_size)(a),_COMPONENT,_acpi_module_name,__LINE__)
 701 #define ACPI_ALLOCATE_ZEROED(a)     acpi_ut_allocate_zeroed_and_track((acpi_size)(a), _COMPONENT,_acpi_module_name,__LINE__)
 702 #define ACPI_FREE(a)                acpi_ut_free_and_track(a,_COMPONENT,_acpi_module_name,__LINE__)
 703 #define ACPI_MEM_TRACKING(a)        a
 704
 705 #endif                          /* ACPI_DBG_TRACK_ALLOCATIONS */
 706
 707 #endif                          /* ACMACROS_H */