Initial commit
[wrt350n-kernel.git] / arch / ppc / syslib / cpm2_pic.c
blobfb2d5842641a34c0806dac2d009971c77f263db6
1 /* The CPM2 internal interrupt controller. It is usually
2 * the only interrupt controller.
3 * There are two 32-bit registers (high/low) for up to 64
4 * possible interrupts.
6 * Now, the fun starts.....Interrupt Numbers DO NOT MAP
7 * in a simple arithmetic fashion to mask or pending registers.
8 * That is, interrupt 4 does not map to bit position 4.
9 * We create two tables, indexed by vector number, to indicate
10 * which register to use and which bit in the register to use.
13 #include <linux/stddef.h>
14 #include <linux/init.h>
15 #include <linux/sched.h>
16 #include <linux/signal.h>
17 #include <linux/irq.h>
19 #include <asm/immap_cpm2.h>
20 #include <asm/mpc8260.h>
22 #include "cpm2_pic.h"
24 static u_char irq_to_siureg[] = {
25 1, 1, 1, 1, 1, 1, 1, 1,
26 1, 1, 1, 1, 1, 1, 1, 1,
27 0, 0, 0, 0, 0, 0, 0, 0,
28 0, 0, 0, 0, 0, 0, 0, 0,
29 1, 1, 1, 1, 1, 1, 1, 1,
30 1, 1, 1, 1, 1, 1, 1, 1,
31 0, 0, 0, 0, 0, 0, 0, 0,
32 0, 0, 0, 0, 0, 0, 0, 0
35 /* bit numbers do not match the docs, these are precomputed so the bit for
36 * a given irq is (1 << irq_to_siubit[irq]) */
37 static u_char irq_to_siubit[] = {
38 0, 15, 14, 13, 12, 11, 10, 9,
39 8, 7, 6, 5, 4, 3, 2, 1,
40 2, 1, 0, 14, 13, 12, 11, 10,
41 9, 8, 7, 6, 5, 4, 3, 0,
42 31, 30, 29, 28, 27, 26, 25, 24,
43 23, 22, 21, 20, 19, 18, 17, 16,
44 16, 17, 18, 19, 20, 21, 22, 23,
45 24, 25, 26, 27, 28, 29, 30, 31,
48 static void cpm2_mask_irq(unsigned int irq_nr)
50 int bit, word;
51 volatile uint *simr;
53 irq_nr -= CPM_IRQ_OFFSET;
55 bit = irq_to_siubit[irq_nr];
56 word = irq_to_siureg[irq_nr];
58 simr = &(cpm2_immr->im_intctl.ic_simrh);
59 ppc_cached_irq_mask[word] &= ~(1 << bit);
60 simr[word] = ppc_cached_irq_mask[word];
63 static void cpm2_unmask_irq(unsigned int irq_nr)
65 int bit, word;
66 volatile uint *simr;
68 irq_nr -= CPM_IRQ_OFFSET;
70 bit = irq_to_siubit[irq_nr];
71 word = irq_to_siureg[irq_nr];
73 simr = &(cpm2_immr->im_intctl.ic_simrh);
74 ppc_cached_irq_mask[word] |= 1 << bit;
75 simr[word] = ppc_cached_irq_mask[word];
78 static void cpm2_mask_and_ack(unsigned int irq_nr)
80 int bit, word;
81 volatile uint *simr, *sipnr;
83 irq_nr -= CPM_IRQ_OFFSET;
85 bit = irq_to_siubit[irq_nr];
86 word = irq_to_siureg[irq_nr];
88 simr = &(cpm2_immr->im_intctl.ic_simrh);
89 sipnr = &(cpm2_immr->im_intctl.ic_sipnrh);
90 ppc_cached_irq_mask[word] &= ~(1 << bit);
91 simr[word] = ppc_cached_irq_mask[word];
92 sipnr[word] = 1 << bit;
95 static void cpm2_end_irq(unsigned int irq_nr)
97 int bit, word;
98 volatile uint *simr;
100 if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))
101 && irq_desc[irq_nr].action) {
103 irq_nr -= CPM_IRQ_OFFSET;
104 bit = irq_to_siubit[irq_nr];
105 word = irq_to_siureg[irq_nr];
107 simr = &(cpm2_immr->im_intctl.ic_simrh);
108 ppc_cached_irq_mask[word] |= 1 << bit;
109 simr[word] = ppc_cached_irq_mask[word];
111 * Work around large numbers of spurious IRQs on PowerPC 82xx
112 * systems.
114 mb();
118 static struct hw_interrupt_type cpm2_pic = {
119 .typename = " CPM2 SIU ",
120 .enable = cpm2_unmask_irq,
121 .disable = cpm2_mask_irq,
122 .ack = cpm2_mask_and_ack,
123 .end = cpm2_end_irq,
126 int cpm2_get_irq(void)
128 int irq;
129 unsigned long bits;
131 /* For CPM2, read the SIVEC register and shift the bits down
132 * to get the irq number. */
133 bits = cpm2_immr->im_intctl.ic_sivec;
134 irq = bits >> 26;
136 if (irq == 0)
137 return(-1);
138 return irq+CPM_IRQ_OFFSET;
141 void cpm2_init_IRQ(void)
143 int i;
145 /* Clear the CPM IRQ controller, in case it has any bits set
146 * from the bootloader
149 /* Mask out everything */
150 cpm2_immr->im_intctl.ic_simrh = 0x00000000;
151 cpm2_immr->im_intctl.ic_simrl = 0x00000000;
152 wmb();
154 /* Ack everything */
155 cpm2_immr->im_intctl.ic_sipnrh = 0xffffffff;
156 cpm2_immr->im_intctl.ic_sipnrl = 0xffffffff;
157 wmb();
159 /* Dummy read of the vector */
160 i = cpm2_immr->im_intctl.ic_sivec;
161 rmb();
163 /* Initialize the default interrupt mapping priorities,
164 * in case the boot rom changed something on us.
166 cpm2_immr->im_intctl.ic_sicr = 0;
167 cpm2_immr->im_intctl.ic_scprrh = 0x05309770;
168 cpm2_immr->im_intctl.ic_scprrl = 0x05309770;
171 /* Enable chaining to OpenPIC, and make everything level
173 for (i = 0; i < NR_CPM_INTS; i++) {
174 irq_desc[i+CPM_IRQ_OFFSET].chip = &cpm2_pic;
175 irq_desc[i+CPM_IRQ_OFFSET].status |= IRQ_LEVEL;