arch/sh/kernel/cpu/irq/intc-sh5.c

   1 /*
   2  * arch/sh/kernel/cpu/irq/intc-sh5.c
   3  *
   4  * Interrupt Controller support for SH5 INTC.
   5  *
   6  * Copyright (C) 2000, 2001  Paolo Alberelli
   7  * Copyright (C) 2003  Paul Mundt
   8  *
   9  * Per-interrupt selective. IRLM=0 (Fixed priority) is not
  10  * supported being useless without a cascaded interrupt
  11  * controller.
  12  *
  13  * This file is subject to the terms and conditions of the GNU General Public
  14  * License.  See the file "COPYING" in the main directory of this archive
  15  * for more details.
  16  */
  17 #include <linux/init.h>
  18 #include <linux/interrupt.h>
  19 #include <linux/irq.h>
  20 #include <linux/io.h>
  21 #include <linux/kernel.h>
  22 #include <linux/bitops.h>
  23 #include <asm/cpu/irq.h>
  24 #include <asm/page.h>
  25
  26 /*
  27  * Maybe the generic Peripheral block could move to a more
  28  * generic include file. INTC Block will be defined here
  29  * and only here to make INTC self-contained in a single
  30  * file.
  31  */
  32 #define INTC_BLOCK_OFFSET       0x01000000
  33
  34 /* Base */
  35 #define INTC_BASE               PHYS_PERIPHERAL_BLOCK + \
  36                                 INTC_BLOCK_OFFSET
  37
  38 /* Address */
  39 #define INTC_ICR_SET            (intc_virt + 0x0)
  40 #define INTC_ICR_CLEAR          (intc_virt + 0x8)
  41 #define INTC_INTPRI_0           (intc_virt + 0x10)
  42 #define INTC_INTSRC_0           (intc_virt + 0x50)
  43 #define INTC_INTSRC_1           (intc_virt + 0x58)
  44 #define INTC_INTREQ_0           (intc_virt + 0x60)
  45 #define INTC_INTREQ_1           (intc_virt + 0x68)
  46 #define INTC_INTENB_0           (intc_virt + 0x70)
  47 #define INTC_INTENB_1           (intc_virt + 0x78)
  48 #define INTC_INTDSB_0           (intc_virt + 0x80)
  49 #define INTC_INTDSB_1           (intc_virt + 0x88)
  50
  51 #define INTC_ICR_IRLM           0x1
  52 #define INTC_INTPRI_PREGS       8               /* 8 Priority Registers */
  53 #define INTC_INTPRI_PPREG       8               /* 8 Priorities per Register */
  54
  55
  56 /*
  57  * Mapper between the vector ordinal and the IRQ number
  58  * passed to kernel/device drivers.
  59  */
  60 int intc_evt_to_irq[(0xE20/0x20)+1] = {
  61         -1, -1, -1, -1, -1, -1, -1, -1, /* 0x000 - 0x0E0 */
  62         -1, -1, -1, -1, -1, -1, -1, -1, /* 0x100 - 0x1E0 */
  63          0,  0,  0,  0,  0,  1,  0,  0, /* 0x200 - 0x2E0 */
  64          2,  0,  0,  3,  0,  0,  0, -1, /* 0x300 - 0x3E0 */
  65         32, 33, 34, 35, 36, 37, 38, -1, /* 0x400 - 0x4E0 */
  66         -1, -1, -1, 63, -1, -1, -1, -1, /* 0x500 - 0x5E0 */
  67         -1, -1, 18, 19, 20, 21, 22, -1, /* 0x600 - 0x6E0 */
  68         39, 40, 41, 42, -1, -1, -1, -1, /* 0x700 - 0x7E0 */
  69          4,  5,  6,  7, -1, -1, -1, -1, /* 0x800 - 0x8E0 */
  70         -1, -1, -1, -1, -1, -1, -1, -1, /* 0x900 - 0x9E0 */
  71         12, 13, 14, 15, 16, 17, -1, -1, /* 0xA00 - 0xAE0 */
  72         -1, -1, -1, -1, -1, -1, -1, -1, /* 0xB00 - 0xBE0 */
  73         -1, -1, -1, -1, -1, -1, -1, -1, /* 0xC00 - 0xCE0 */
  74         -1, -1, -1, -1, -1, -1, -1, -1, /* 0xD00 - 0xDE0 */
  75         -1, -1                          /* 0xE00 - 0xE20 */
  76 };
  77
  78 static unsigned long intc_virt;
  79
  80 static unsigned int startup_intc_irq(unsigned int irq);
  81 static void shutdown_intc_irq(unsigned int irq);
  82 static void enable_intc_irq(unsigned int irq);
  83 static void disable_intc_irq(unsigned int irq);
  84 static void mask_and_ack_intc(unsigned int);
  85 static void end_intc_irq(unsigned int irq);
  86
  87 static struct hw_interrupt_type intc_irq_type = {
  88         .typename = "INTC",
  89         .startup = startup_intc_irq,
  90         .shutdown = shutdown_intc_irq,
  91         .enable = enable_intc_irq,
  92         .disable = disable_intc_irq,
  93         .ack = mask_and_ack_intc,
  94         .end = end_intc_irq
  95 };
  96
  97 static int irlm;                /* IRL mode */
  98
  99 static unsigned int startup_intc_irq(unsigned int irq)
 100 {
 101         enable_intc_irq(irq);
 102         return 0; /* never anything pending */
 103 }
 104
 105 static void shutdown_intc_irq(unsigned int irq)
 106 {
 107         disable_intc_irq(irq);
 108 }
 109
 110 static void enable_intc_irq(unsigned int irq)
 111 {
 112         unsigned long reg;
 113         unsigned long bitmask;
 114
 115         if ((irq <= IRQ_IRL3) && (irlm == NO_PRIORITY))
 116                 printk("Trying to use straight IRL0-3 with an encoding platform.\n");
 117
 118         if (irq < 32) {
 119                 reg = INTC_INTENB_0;
 120                 bitmask = 1 << irq;
 121         } else {
 122                 reg = INTC_INTENB_1;
 123                 bitmask = 1 << (irq - 32);
 124         }
 125
 126         ctrl_outl(bitmask, reg);
 127 }
 128
 129 static void disable_intc_irq(unsigned int irq)
 130 {
 131         unsigned long reg;
 132         unsigned long bitmask;
 133
 134         if (irq < 32) {
 135                 reg = INTC_INTDSB_0;
 136                 bitmask = 1 << irq;
 137         } else {
 138                 reg = INTC_INTDSB_1;
 139                 bitmask = 1 << (irq - 32);
 140         }
 141
 142         ctrl_outl(bitmask, reg);
 143 }
 144
 145 static void mask_and_ack_intc(unsigned int irq)
 146 {
 147         disable_intc_irq(irq);
 148 }
 149
 150 static void end_intc_irq(unsigned int irq)
 151 {
 152         enable_intc_irq(irq);
 153 }
 154
 155 /* For future use, if we ever support IRLM=0) */
 156 void make_intc_irq(unsigned int irq)
 157 {
 158         disable_irq_nosync(irq);
 159         irq_desc[irq].chip = &intc_irq_type;
 160         disable_intc_irq(irq);
 161 }
 162
 163 #if defined(CONFIG_PROC_FS) && defined(CONFIG_SYSCTL)
 164 static int IRQ_to_vectorN[NR_INTC_IRQS] = {
 165         0x12, 0x15, 0x18, 0x1B, 0x40, 0x41, 0x42, 0x43, /*  0- 7 */
 166           -1,   -1,   -1,   -1, 0x50, 0x51, 0x52, 0x53, /*  8-15 */
 167         0x54, 0x55, 0x32, 0x33, 0x34, 0x35, 0x36,   -1, /* 16-23 */
 168           -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1, /* 24-31 */
 169         0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x38, /* 32-39 */
 170         0x39, 0x3A, 0x3B,   -1,   -1,   -1,   -1,   -1, /* 40-47 */
 171           -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1, /* 48-55 */
 172           -1,   -1,   -1,   -1,   -1,   -1,   -1, 0x2B, /* 56-63 */
 173
 174 };
 175
 176 int intc_irq_describe(char* p, int irq)
 177 {
 178         if (irq < NR_INTC_IRQS)
 179                 return sprintf(p, "(0x%3x)", IRQ_to_vectorN[irq]*0x20);
 180         else
 181                 return 0;
 182 }
 183 #endif
 184
 185 void __init plat_irq_setup(void)
 186 {
 187         unsigned long long __dummy0, __dummy1=~0x00000000100000f0;
 188         unsigned long reg;
 189         unsigned long data;
 190         int i;
 191
 192         intc_virt = onchip_remap(INTC_BASE, 1024, "INTC");
 193         if (!intc_virt) {
 194                 panic("Unable to remap INTC\n");
 195         }
 196
 197
 198         /* Set default: per-line enable/disable, priority driven ack/eoi */
 199         for (i = 0; i < NR_INTC_IRQS; i++) {
 200                 if (platform_int_priority[i] != NO_PRIORITY) {
 201                         irq_desc[i].chip = &intc_irq_type;
 202                 }
 203         }
 204
 205
 206         /* Disable all interrupts and set all priorities to 0 to avoid trouble */
 207         ctrl_outl(-1, INTC_INTDSB_0);
 208         ctrl_outl(-1, INTC_INTDSB_1);
 209
 210         for (reg = INTC_INTPRI_0, i = 0; i < INTC_INTPRI_PREGS; i++, reg += 8)
 211                 ctrl_outl( NO_PRIORITY, reg);
 212
 213
 214         /* Set IRLM */
 215         /* If all the priorities are set to 'no priority', then
 216          * assume we are using encoded mode.
 217          */
 218         irlm = platform_int_priority[IRQ_IRL0] + platform_int_priority[IRQ_IRL1] + \
 219                 platform_int_priority[IRQ_IRL2] + platform_int_priority[IRQ_IRL3];
 220
 221         if (irlm == NO_PRIORITY) {
 222                 /* IRLM = 0 */
 223                 reg = INTC_ICR_CLEAR;
 224                 i = IRQ_INTA;
 225                 printk("Trying to use encoded IRL0-3. IRLs unsupported.\n");
 226         } else {
 227                 /* IRLM = 1 */
 228                 reg = INTC_ICR_SET;
 229                 i = IRQ_IRL0;
 230         }
 231         ctrl_outl(INTC_ICR_IRLM, reg);
 232
 233         /* Set interrupt priorities according to platform description */
 234         for (data = 0, reg = INTC_INTPRI_0; i < NR_INTC_IRQS; i++) {
 235                 data |= platform_int_priority[i] << ((i % INTC_INTPRI_PPREG) * 4);
 236                 if ((i % INTC_INTPRI_PPREG) == (INTC_INTPRI_PPREG - 1)) {
 237                         /* Upon the 7th, set Priority Register */
 238                         ctrl_outl(data, reg);
 239                         data = 0;
 240                         reg += 8;
 241                 }
 242         }
 243
 244         /*
 245          * And now let interrupts come in.
 246          * sti() is not enough, we need to
 247          * lower priority, too.
 248          */
 249         __asm__ __volatile__("getcon    " __SR ", %0\n\t"
 250                              "and       %0, %1, %0\n\t"
 251                              "putcon    %0, " __SR "\n\t"
 252                              : "=&r" (__dummy0)
 253                              : "r" (__dummy1));
 254 }