Initial commit

[wrt350n-kernel.git] / drivers / hwmon / adm1029.c

/*
 * adm1029.c - Part of lm_sensors, Linux kernel modules for hardware monitoring
 *
 * Copyright (C) 2006 Corentin LABBE <corentin.labbe@geomatys.fr>
 *
 * Based on LM83 Driver by Jean Delvare <khali@linux-fr.org>
 *
 * Give only processor, motherboard temperatures and fan tachs
 * Very rare chip please let me know if you use it
 *
 * http://www.analog.com/UploadedFiles/Data_Sheets/ADM1029.pdf
 *
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation version 2 of the License
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */

#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/hwmon-sysfs.h>
#include <linux/hwmon.h>
#include <linux/err.h>
#include <linux/mutex.h>

/*
 * Addresses to scan
 */

static unsigned short normal_i2c[] = {
        0x28, 0x29, 0x2a,
        0x2b, 0x2c, 0x2d,
        0x2e, 0x2f, I2C_CLIENT_END
};

/*
 * Insmod parameters
 */

I2C_CLIENT_INSMOD_1(adm1029);

/*
 * The ADM1029 registers
 * Manufacturer ID is 0x41 for Analog Devices
 */

#define ADM1029_REG_MAN_ID                      0x0D
#define ADM1029_REG_CHIP_ID                     0x0E
#define ADM1029_REG_CONFIG                      0x01
#define ADM1029_REG_NB_FAN_SUPPORT              0x02

#define ADM1029_REG_TEMP_DEVICES_INSTALLED      0x06

#define ADM1029_REG_LOCAL_TEMP                  0xA0
#define ADM1029_REG_REMOTE1_TEMP                0xA1
#define ADM1029_REG_REMOTE2_TEMP                0xA2

#define ADM1029_REG_LOCAL_TEMP_HIGH             0x90
#define ADM1029_REG_REMOTE1_TEMP_HIGH           0x91
#define ADM1029_REG_REMOTE2_TEMP_HIGH           0x92

#define ADM1029_REG_LOCAL_TEMP_LOW              0x98
#define ADM1029_REG_REMOTE1_TEMP_LOW            0x99
#define ADM1029_REG_REMOTE2_TEMP_LOW            0x9A

#define ADM1029_REG_FAN1                        0x70
#define ADM1029_REG_FAN2                        0x71

#define ADM1029_REG_FAN1_MIN                    0x78
#define ADM1029_REG_FAN2_MIN                    0x79

#define ADM1029_REG_FAN1_CONFIG                 0x68
#define ADM1029_REG_FAN2_CONFIG                 0x69

#define TEMP_FROM_REG(val)      ((val) * 1000)

#define DIV_FROM_REG(val)       ( 1 << (((val) >> 6) - 1))

/* Registers to be checked by adm1029_update_device() */
static const u8 ADM1029_REG_TEMP[] = {
        ADM1029_REG_LOCAL_TEMP,
        ADM1029_REG_REMOTE1_TEMP,
        ADM1029_REG_REMOTE2_TEMP,
        ADM1029_REG_LOCAL_TEMP_HIGH,
        ADM1029_REG_REMOTE1_TEMP_HIGH,
        ADM1029_REG_REMOTE2_TEMP_HIGH,
        ADM1029_REG_LOCAL_TEMP_LOW,
        ADM1029_REG_REMOTE1_TEMP_LOW,
        ADM1029_REG_REMOTE2_TEMP_LOW,
};

static const u8 ADM1029_REG_FAN[] = {
        ADM1029_REG_FAN1,
        ADM1029_REG_FAN2,
        ADM1029_REG_FAN1_MIN,
        ADM1029_REG_FAN2_MIN,
};

static const u8 ADM1029_REG_FAN_DIV[] = {
        ADM1029_REG_FAN1_CONFIG,
        ADM1029_REG_FAN2_CONFIG,
};

/*
 * Functions declaration
 */

static int adm1029_attach_adapter(struct i2c_adapter *adapter);
static int adm1029_detect(struct i2c_adapter *adapter, int address, int kind);
static int adm1029_detach_client(struct i2c_client *client);
static struct adm1029_data *adm1029_update_device(struct device *dev);
static int adm1029_init_client(struct i2c_client *client);

/*
 * Driver data (common to all clients)
 */

static struct i2c_driver adm1029_driver = {
        .driver = {
                .name = "adm1029",
        },
        .attach_adapter = adm1029_attach_adapter,
        .detach_client = adm1029_detach_client,
};

/*
 * Client data (each client gets its own)
 */

struct adm1029_data {
        struct i2c_client client;
        struct device *hwmon_dev;
        struct mutex update_lock;
        char valid;             /* zero until following fields are valid */
        unsigned long last_updated;     /* in jiffies */

        /* registers values, signed for temperature, unsigned for other stuff */
        s8 temp[ARRAY_SIZE(ADM1029_REG_TEMP)];
        u8 fan[ARRAY_SIZE(ADM1029_REG_FAN)];
        u8 fan_div[ARRAY_SIZE(ADM1029_REG_FAN_DIV)];
};

/*
 * Sysfs stuff
 */

static ssize_t
show_temp(struct device *dev, struct device_attribute *devattr, char *buf)
{
        struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
        struct adm1029_data *data = adm1029_update_device(dev);
        return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[attr->index]));
}

static ssize_t
show_fan(struct device *dev, struct device_attribute *devattr, char *buf)
{
        struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
        struct adm1029_data *data = adm1029_update_device(dev);
        u16 val;
        if (data->fan[attr->index] == 0 || data->fan_div[attr->index] == 0
            || data->fan[attr->index] == 255) {
                return sprintf(buf, "0\n");
        }

        val = 1880 * 120 / DIV_FROM_REG(data->fan_div[attr->index])
            / data->fan[attr->index];
        return sprintf(buf, "%d\n", val);
}

static ssize_t
show_fan_div(struct device *dev, struct device_attribute *devattr, char *buf)
{
        struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
        struct adm1029_data *data = adm1029_update_device(dev);
        if (data->fan_div[attr->index] == 0)
                return sprintf(buf, "0\n");
        return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[attr->index]));
}

static ssize_t set_fan_div(struct device *dev,
            struct device_attribute *devattr, const char *buf, size_t count)
{
        struct i2c_client *client = to_i2c_client(dev);
        struct adm1029_data *data = i2c_get_clientdata(client);
        struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
        long val = simple_strtol(buf, NULL, 10);
        u8 reg;

        mutex_lock(&data->update_lock);

        /*Read actual config */
        reg = i2c_smbus_read_byte_data(client,
                                       ADM1029_REG_FAN_DIV[attr->index]);

        switch (val) {
        case 1:
                val = 1;
                break;
        case 2:
                val = 2;
                break;
        case 4:
                val = 3;
                break;
        default:
                mutex_unlock(&data->update_lock);
                dev_err(&client->dev, "fan_div value %ld not "
                        "supported. Choose one of 1, 2 or 4!\n", val);
                return -EINVAL;
        }
        /* Update the value */
        reg = (reg & 0x3F) | (val << 6);

        /* Write value */
        i2c_smbus_write_byte_data(client,
                                  ADM1029_REG_FAN_DIV[attr->index], reg);
        mutex_unlock(&data->update_lock);

        return count;
}

/*
Access rights on sysfs, S_IRUGO stand for Is Readable by User, Group and Others
                        S_IWUSR stand for Is Writable by User
*/
static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1);
static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2);

static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO, show_temp, NULL, 3);
static SENSOR_DEVICE_ATTR(temp2_max, S_IRUGO, show_temp, NULL, 4);
static SENSOR_DEVICE_ATTR(temp3_max, S_IRUGO, show_temp, NULL, 5);

static SENSOR_DEVICE_ATTR(temp1_min, S_IRUGO, show_temp, NULL, 6);
static SENSOR_DEVICE_ATTR(temp2_min, S_IRUGO, show_temp, NULL, 7);
static SENSOR_DEVICE_ATTR(temp3_min, S_IRUGO, show_temp, NULL, 8);

static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0);
static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1);

static SENSOR_DEVICE_ATTR(fan1_min, S_IRUGO, show_fan, NULL, 2);
static SENSOR_DEVICE_ATTR(fan2_min, S_IRUGO, show_fan, NULL, 3);

static SENSOR_DEVICE_ATTR(fan1_div, S_IRUGO | S_IWUSR,
                          show_fan_div, set_fan_div, 0);
static SENSOR_DEVICE_ATTR(fan2_div, S_IRUGO | S_IWUSR,
                          show_fan_div, set_fan_div, 1);

static struct attribute *adm1029_attributes[] = {
        &sensor_dev_attr_temp1_input.dev_attr.attr,
        &sensor_dev_attr_temp1_min.dev_attr.attr,
        &sensor_dev_attr_temp1_max.dev_attr.attr,
        &sensor_dev_attr_temp2_input.dev_attr.attr,
        &sensor_dev_attr_temp2_min.dev_attr.attr,
        &sensor_dev_attr_temp2_max.dev_attr.attr,
        &sensor_dev_attr_temp3_input.dev_attr.attr,
        &sensor_dev_attr_temp3_min.dev_attr.attr,
        &sensor_dev_attr_temp3_max.dev_attr.attr,
        &sensor_dev_attr_fan1_input.dev_attr.attr,
        &sensor_dev_attr_fan2_input.dev_attr.attr,
        &sensor_dev_attr_fan1_min.dev_attr.attr,
        &sensor_dev_attr_fan2_min.dev_attr.attr,
        &sensor_dev_attr_fan1_div.dev_attr.attr,
        &sensor_dev_attr_fan2_div.dev_attr.attr,
        NULL
};

static const struct attribute_group adm1029_group = {
        .attrs = adm1029_attributes,
};

/*
 * Real code
 */

static int adm1029_attach_adapter(struct i2c_adapter *adapter)
{
        if (!(adapter->class & I2C_CLASS_HWMON))
                return 0;
        return i2c_probe(adapter, &addr_data, adm1029_detect);
}

/*
 * The following function does more than just detection. If detection
 * succeeds, it also registers the new chip.
 */

static int adm1029_detect(struct i2c_adapter *adapter, int address, int kind)
{
        struct i2c_client *client;
        struct adm1029_data *data;
        int err = 0;
        const char *name = "";
        if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
                goto exit;

        if (!(data = kzalloc(sizeof(struct adm1029_data), GFP_KERNEL))) {
                err = -ENOMEM;
                goto exit;
        }

        client = &data->client;
        i2c_set_clientdata(client, data);
        client->addr = address;
        client->adapter = adapter;
        client->driver = &adm1029_driver;

        /* Now we do the detection and identification. A negative kind
         * means that the driver was loaded with no force parameter
         * (default), so we must both detect and identify the chip
         * (actually there is only one possible kind of chip for now, adm1029).
         * A zero kind means that the driver was loaded with the force
         * parameter, the detection step shall be skipped. A positive kind
         * means that the driver was loaded with the force parameter and a
         * given kind of chip is requested, so both the detection and the
         * identification steps are skipped. */

        /* Default to an adm1029 if forced */
        if (kind == 0)
                kind = adm1029;

        /* ADM1029 doesn't have CHIP ID, check just MAN ID
         * For better detection we check also ADM1029_TEMP_DEVICES_INSTALLED,
         * ADM1029_REG_NB_FAN_SUPPORT and compare it with possible values
         * documented
         */

        if (kind <= 0) {        /* identification */
                u8 man_id, chip_id, temp_devices_installed, nb_fan_support;

                man_id = i2c_smbus_read_byte_data(client, ADM1029_REG_MAN_ID);
                chip_id = i2c_smbus_read_byte_data(client, ADM1029_REG_CHIP_ID);
                temp_devices_installed = i2c_smbus_read_byte_data(client,
                                        ADM1029_REG_TEMP_DEVICES_INSTALLED);
                nb_fan_support = i2c_smbus_read_byte_data(client,
                                                ADM1029_REG_NB_FAN_SUPPORT);
                /* 0x41 is Analog Devices */
                if (man_id == 0x41 && (temp_devices_installed & 0xf9) == 0x01
                    && nb_fan_support == 0x03) {
                        if ((chip_id & 0xF0) == 0x00) {
                                kind = adm1029;
                        } else {
                                /* There are no "official" CHIP ID, so actually
                                 * we use Major/Minor revision for that */
                                printk(KERN_INFO
                                       "adm1029: Unknown major revision %x, "
                                       "please let us know\n", chip_id);
                        }
                }

                if (kind <= 0) {        /* identification failed */
                        pr_debug("adm1029: Unsupported chip (man_id=0x%02X, "
                                 "chip_id=0x%02X)\n", man_id, chip_id);
                        goto exit_free;
                }
        }

        if (kind == adm1029) {
                name = "adm1029";
        }

        /* We can fill in the remaining client fields */
        strlcpy(client->name, name, I2C_NAME_SIZE);
        mutex_init(&data->update_lock);

        /* Tell the I2C layer a new client has arrived */
        if ((err = i2c_attach_client(client)))
                goto exit_free;

        /*
         * Initialize the ADM1029 chip
         * Check config register
         */
        if (adm1029_init_client(client) == 0)
                goto exit_detach;

        /* Register sysfs hooks */
        if ((err = sysfs_create_group(&client->dev.kobj, &adm1029_group)))
                goto exit_detach;

        data->hwmon_dev = hwmon_device_register(&client->dev);
        if (IS_ERR(data->hwmon_dev)) {
                err = PTR_ERR(data->hwmon_dev);
                goto exit_remove_files;
        }

        return 0;

 exit_remove_files:
        sysfs_remove_group(&client->dev.kobj, &adm1029_group);
 exit_detach:
        i2c_detach_client(client);
 exit_free:
        kfree(data);
 exit:
        return err;
}

static int adm1029_init_client(struct i2c_client *client)
{
        u8 config;
        config = i2c_smbus_read_byte_data(client, ADM1029_REG_CONFIG);
        if ((config & 0x10) == 0) {
                i2c_smbus_write_byte_data(client, ADM1029_REG_CONFIG,
                                          config | 0x10);
        }
        /* recheck config */
        config = i2c_smbus_read_byte_data(client, ADM1029_REG_CONFIG);
        if ((config & 0x10) == 0) {
                dev_err(&client->dev, "Initialization failed!\n");
                return 0;
        }
        return 1;
}

static int adm1029_detach_client(struct i2c_client *client)
{
        struct adm1029_data *data = i2c_get_clientdata(client);
        int err;

        hwmon_device_unregister(data->hwmon_dev);
        sysfs_remove_group(&client->dev.kobj, &adm1029_group);

        if ((err = i2c_detach_client(client)))
                return err;

        kfree(data);
        return 0;
}

/*
function that update the status of the chips (temperature for exemple)
*/
static struct adm1029_data *adm1029_update_device(struct device *dev)
{
        struct i2c_client *client = to_i2c_client(dev);
        struct adm1029_data *data = i2c_get_clientdata(client);

        mutex_lock(&data->update_lock);
        /*
         * Use the "cache" Luke, don't recheck values
         * if there are already checked not a long time later
         */
        if (time_after(jiffies, data->last_updated + HZ * 2)
         || !data->valid) {
                int nr;

                dev_dbg(&client->dev, "Updating adm1029 data\n");

                for (nr = 0; nr < ARRAY_SIZE(ADM1029_REG_TEMP); nr++) {
                        data->temp[nr] =
                            i2c_smbus_read_byte_data(client,
                                                     ADM1029_REG_TEMP[nr]);
                }
                for (nr = 0; nr < ARRAY_SIZE(ADM1029_REG_FAN); nr++) {
                        data->fan[nr] =
                            i2c_smbus_read_byte_data(client,
                                                     ADM1029_REG_FAN[nr]);
                }
                for (nr = 0; nr < ARRAY_SIZE(ADM1029_REG_FAN_DIV); nr++) {
                        data->fan_div[nr] =
                            i2c_smbus_read_byte_data(client,
                                                     ADM1029_REG_FAN_DIV[nr]);
                }

                data->last_updated = jiffies;
                data->valid = 1;
        }

        mutex_unlock(&data->update_lock);

        return data;
}

/*
        Common module stuff
*/
static int __init sensors_adm1029_init(void)
{

        return i2c_add_driver(&adm1029_driver);
}

static void __exit sensors_adm1029_exit(void)
{

        i2c_del_driver(&adm1029_driver);
}

MODULE_AUTHOR("Corentin LABBE <corentin.labbe@geomatys.fr>");
MODULE_DESCRIPTION("adm1029 driver");
MODULE_LICENSE("GPL v2");

module_init(sensors_adm1029_init);
module_exit(sensors_adm1029_exit);