?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Initial commit
[wrt350n-kernel.git] / drivers / usb / serial / ftdi_sio.h
blob6eee2ab914eca092d1d3b53dc92b30ee294605d1
1 /*
2 * Definitions for the FTDI USB Single Port Serial Converter -
3 * known as FTDI_SIO (Serial Input/Output application of the chipset)
4 *
5 * The example I have is known as the USC-1000 which is available from
6 * http://www.dse.co.nz - cat no XH4214 It looks similar to this:
7 * http://www.dansdata.com/usbser.htm but I can't be sure There are other
8 * USC-1000s which don't look like my device though so beware!
9 *
10 * The device is based on the FTDI FT8U100AX chip. It has a DB25 on one side,
11 * USB on the other.
12 *
13 * Thanx to FTDI (http://www.ftdi.co.uk) for so kindly providing details
14 * of the protocol required to talk to the device and ongoing assistence
15 * during development.
16 *
17 * Bill Ryder - bryder@sgi.com formerly of Silicon Graphics, Inc.- wrote the
18 * FTDI_SIO implementation.
19 *
20 * Philipp Gühring - pg@futureware.at - added the Device ID of the USB relais
21 * from Rudolf Gugler
22 *
23 */
24
25 #define FTDI_VID 0x0403 /* Vendor Id */
26 #define FTDI_SIO_PID 0x8372 /* Product Id SIO application of 8U100AX */
27 #define FTDI_8U232AM_PID 0x6001 /* Similar device to SIO above */
28 #define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */
29 #define FTDI_8U2232C_PID 0x6010 /* Dual channel device */
30 #define FTDI_232RL_PID 0xFBFA /* Product ID for FT232RL */
31 #define FTDI_RELAIS_PID 0xFA10 /* Relais device from Rudolf Gugler */
32 #define FTDI_NF_RIC_VID 0x0DCD /* Vendor Id */
33 #define FTDI_NF_RIC_PID 0x0001 /* Product Id */
34 #define FTDI_USBX_707_PID 0xF857 /* ADSTech IR Blaster USBX-707 */
35
36
37 /* www.canusb.com Lawicel CANUSB device */
38 #define FTDI_CANUSB_PID 0xFFA8 /* Product Id */
39
40 /* AlphaMicro Components AMC-232USB01 device */
41 #define FTDI_AMC232_PID 0xFF00 /* Product Id */
42
43 /* ACT Solutions HomePro ZWave interface (http://www.act-solutions.com/HomePro.htm) */
44 #define FTDI_ACTZWAVE_PID 0xF2D0
45
46
47 /* www.starting-point-systems.com µChameleon device */
48 #define FTDI_MICRO_CHAMELEON_PID 0xCAA0 /* Product Id */
49
50 /* www.irtrans.de device */
51 #define FTDI_IRTRANS_PID 0xFC60 /* Product Id */
52
53
54 /* www.thoughttechnology.com/ TT-USB provide with procomp use ftdi_sio */
55 #define FTDI_TTUSB_PID 0xFF20 /* Product Id */
56
57 /* iPlus device */
58 #define FTDI_IPLUS_PID 0xD070 /* Product Id */
59 #define FTDI_IPLUS2_PID 0xD071 /* Product Id */
60
61 /* DMX4ALL DMX Interfaces */
62 #define FTDI_DMX4ALL 0xC850
63
64 /* OpenDCC (www.opendcc.de) product id */
65 #define FTDI_OPENDCC_PID 0xBFD8
66
67 /* www.crystalfontz.com devices - thanx for providing free devices for evaluation ! */
68 /* they use the ftdi chipset for the USB interface and the vendor id is the same */
69 #define FTDI_XF_632_PID 0xFC08 /* 632: 16x2 Character Display */
70 #define FTDI_XF_634_PID 0xFC09 /* 634: 20x4 Character Display */
71 #define FTDI_XF_547_PID 0xFC0A /* 547: Two line Display */
72 #define FTDI_XF_633_PID 0xFC0B /* 633: 16x2 Character Display with Keys */
73 #define FTDI_XF_631_PID 0xFC0C /* 631: 20x2 Character Display */
74 #define FTDI_XF_635_PID 0xFC0D /* 635: 20x4 Character Display */
75 #define FTDI_XF_640_PID 0xFC0E /* 640: Two line Display */
76 #define FTDI_XF_642_PID 0xFC0F /* 642: Two line Display */
77
78 /* Video Networks Limited / Homechoice in the UK use an ftdi-based device for their 1Mb */
79 /* broadband internet service. The following PID is exhibited by the usb device supplied */
80 /* (the VID is the standard ftdi vid (FTDI_VID) */
81 #define FTDI_VNHCPCUSB_D_PID 0xfe38 /* Product Id */
82
83 /*
84 * PCDJ use ftdi based dj-controllers. The following PID is for their DAC-2 device
85 * http://www.pcdjhardware.com/DAC2.asp (PID sent by Wouter Paesen)
86 * (the VID is the standard ftdi vid (FTDI_VID) */
87 #define FTDI_PCDJ_DAC2_PID 0xFA88
88
89 /*
90 * The following are the values for the Matrix Orbital LCD displays,
91 * which are the FT232BM ( similar to the 8U232AM )
92 */
93 #define FTDI_MTXORB_0_PID 0xFA00 /* Matrix Orbital Product Id */
94 #define FTDI_MTXORB_1_PID 0xFA01 /* Matrix Orbital Product Id */
95 #define FTDI_MTXORB_2_PID 0xFA02 /* Matrix Orbital Product Id */
96 #define FTDI_MTXORB_3_PID 0xFA03 /* Matrix Orbital Product Id */
97 #define FTDI_MTXORB_4_PID 0xFA04 /* Matrix Orbital Product Id */
98 #define FTDI_MTXORB_5_PID 0xFA05 /* Matrix Orbital Product Id */
99 #define FTDI_MTXORB_6_PID 0xFA06 /* Matrix Orbital Product Id */
100
101 /* OOCDlink by Joern Kaipf <joernk@web.de>
102 * (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */
103 #define FTDI_OOCDLINK_PID 0xbaf8 /* Amontec JTAGkey */
104
105 /* Interbiometrics USB I/O Board */
106 /* Developed for Interbiometrics by Rudolf Gugler */
107 #define INTERBIOMETRICS_VID 0x1209
108 #define INTERBIOMETRICS_IOBOARD_PID 0x1002
109 #define INTERBIOMETRICS_MINI_IOBOARD_PID 0x1006
110
111 /*
112 * The following are the values for the Perle Systems
113 * UltraPort USB serial converters
114 */
115 #define FTDI_PERLE_ULTRAPORT_PID 0xF0C0 /* Perle UltraPort Product Id */
116
117 /*
118 * The following are the values for the Sealevel SeaLINK+ adapters.
119 * (Original list sent by Tuan Hoang. Ian Abbott renamed the macros and
120 * removed some PIDs that don't seem to match any existing products.)
121 */
122 #define SEALEVEL_VID 0x0c52 /* Sealevel Vendor ID */
123 #define SEALEVEL_2101_PID 0x2101 /* SeaLINK+232 (2101/2105) */
124 #define SEALEVEL_2102_PID 0x2102 /* SeaLINK+485 (2102) */
125 #define SEALEVEL_2103_PID 0x2103 /* SeaLINK+232I (2103) */
126 #define SEALEVEL_2104_PID 0x2104 /* SeaLINK+485I (2104) */
127 #define SEALEVEL_2106_PID 0x9020 /* SeaLINK+422 (2106) */
128 #define SEALEVEL_2201_1_PID 0x2211 /* SeaPORT+2/232 (2201) Port 1 */
129 #define SEALEVEL_2201_2_PID 0x2221 /* SeaPORT+2/232 (2201) Port 2 */
130 #define SEALEVEL_2202_1_PID 0x2212 /* SeaPORT+2/485 (2202) Port 1 */
131 #define SEALEVEL_2202_2_PID 0x2222 /* SeaPORT+2/485 (2202) Port 2 */
132 #define SEALEVEL_2203_1_PID 0x2213 /* SeaPORT+2 (2203) Port 1 */
133 #define SEALEVEL_2203_2_PID 0x2223 /* SeaPORT+2 (2203) Port 2 */
134 #define SEALEVEL_2401_1_PID 0x2411 /* SeaPORT+4/232 (2401) Port 1 */
135 #define SEALEVEL_2401_2_PID 0x2421 /* SeaPORT+4/232 (2401) Port 2 */
136 #define SEALEVEL_2401_3_PID 0x2431 /* SeaPORT+4/232 (2401) Port 3 */
137 #define SEALEVEL_2401_4_PID 0x2441 /* SeaPORT+4/232 (2401) Port 4 */
138 #define SEALEVEL_2402_1_PID 0x2412 /* SeaPORT+4/485 (2402) Port 1 */
139 #define SEALEVEL_2402_2_PID 0x2422 /* SeaPORT+4/485 (2402) Port 2 */
140 #define SEALEVEL_2402_3_PID 0x2432 /* SeaPORT+4/485 (2402) Port 3 */
141 #define SEALEVEL_2402_4_PID 0x2442 /* SeaPORT+4/485 (2402) Port 4 */
142 #define SEALEVEL_2403_1_PID 0x2413 /* SeaPORT+4 (2403) Port 1 */
143 #define SEALEVEL_2403_2_PID 0x2423 /* SeaPORT+4 (2403) Port 2 */
144 #define SEALEVEL_2403_3_PID 0x2433 /* SeaPORT+4 (2403) Port 3 */
145 #define SEALEVEL_2403_4_PID 0x2443 /* SeaPORT+4 (2403) Port 4 */
146 #define SEALEVEL_2801_1_PID 0X2811 /* SeaLINK+8/232 (2801) Port 1 */
147 #define SEALEVEL_2801_2_PID 0X2821 /* SeaLINK+8/232 (2801) Port 2 */
148 #define SEALEVEL_2801_3_PID 0X2831 /* SeaLINK+8/232 (2801) Port 3 */
149 #define SEALEVEL_2801_4_PID 0X2841 /* SeaLINK+8/232 (2801) Port 4 */
150 #define SEALEVEL_2801_5_PID 0X2851 /* SeaLINK+8/232 (2801) Port 5 */
151 #define SEALEVEL_2801_6_PID 0X2861 /* SeaLINK+8/232 (2801) Port 6 */
152 #define SEALEVEL_2801_7_PID 0X2871 /* SeaLINK+8/232 (2801) Port 7 */
153 #define SEALEVEL_2801_8_PID 0X2881 /* SeaLINK+8/232 (2801) Port 8 */
154 #define SEALEVEL_2802_1_PID 0X2812 /* SeaLINK+8/485 (2802) Port 1 */
155 #define SEALEVEL_2802_2_PID 0X2822 /* SeaLINK+8/485 (2802) Port 2 */
156 #define SEALEVEL_2802_3_PID 0X2832 /* SeaLINK+8/485 (2802) Port 3 */
157 #define SEALEVEL_2802_4_PID 0X2842 /* SeaLINK+8/485 (2802) Port 4 */
158 #define SEALEVEL_2802_5_PID 0X2852 /* SeaLINK+8/485 (2802) Port 5 */
159 #define SEALEVEL_2802_6_PID 0X2862 /* SeaLINK+8/485 (2802) Port 6 */
160 #define SEALEVEL_2802_7_PID 0X2872 /* SeaLINK+8/485 (2802) Port 7 */
161 #define SEALEVEL_2802_8_PID 0X2882 /* SeaLINK+8/485 (2802) Port 8 */
162 #define SEALEVEL_2803_1_PID 0X2813 /* SeaLINK+8 (2803) Port 1 */
163 #define SEALEVEL_2803_2_PID 0X2823 /* SeaLINK+8 (2803) Port 2 */
164 #define SEALEVEL_2803_3_PID 0X2833 /* SeaLINK+8 (2803) Port 3 */
165 #define SEALEVEL_2803_4_PID 0X2843 /* SeaLINK+8 (2803) Port 4 */
166 #define SEALEVEL_2803_5_PID 0X2853 /* SeaLINK+8 (2803) Port 5 */
167 #define SEALEVEL_2803_6_PID 0X2863 /* SeaLINK+8 (2803) Port 6 */
168 #define SEALEVEL_2803_7_PID 0X2873 /* SeaLINK+8 (2803) Port 7 */
169 #define SEALEVEL_2803_8_PID 0X2883 /* SeaLINK+8 (2803) Port 8 */
170
171 /*
172 * The following are the values for two KOBIL chipcard terminals.
173 */
174 #define KOBIL_VID 0x0d46 /* KOBIL Vendor ID */
175 #define KOBIL_CONV_B1_PID 0x2020 /* KOBIL Konverter for B1 */
176 #define KOBIL_CONV_KAAN_PID 0x2021 /* KOBIL_Konverter for KAAN */
177
178 /*
179 * Icom ID-1 digital transceiver
180 */
181
182 #define ICOM_ID1_VID 0x0C26
183 #define ICOM_ID1_PID 0x0004
184
185 /*
186 * ASK.fr devices
187 */
188 #define FTDI_ASK_RDR400_PID 0xC991 /* ASK RDR 400 series card reader */
189
190 /*
191 * FTDI USB UART chips used in construction projects from the
192 * Elektor Electronics magazine (http://elektor-electronics.co.uk)
193 */
194 #define ELEKTOR_VID 0x0C7D
195 #define ELEKTOR_FT323R_PID 0x0005 /* RFID-Reader, issue 09-2006 */
196
197 /*
198 * DSS-20 Sync Station for Sony Ericsson P800
199 */
200 #define FTDI_DSS20_PID 0xFC82
201
202 /*
203 * Home Electronics (www.home-electro.com) USB gadgets
204 */
205 #define FTDI_HE_TIRA1_PID 0xFA78 /* Tira-1 IR transceiver */
206
207 /* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */
208 /* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */
209 #define FTDI_USB_UIRT_PID 0xF850 /* Product Id */
210
211 /* TNC-X USB-to-packet-radio adapter, versions prior to 3.0 (DLP module) */
212
213 #define FTDI_TNC_X_PID 0xEBE0
214
215 /*
216 * ELV USB devices submitted by Christian Abt of ELV (www.elv.de).
217 * All of these devices use FTDI's vendor ID (0x0403).
218 *
219 * The previously included PID for the UO 100 module was incorrect.
220 * In fact, that PID was for ELV's UR 100 USB-RS232 converter (0xFB58).
221 *
222 * Armin Laeuger originally sent the PID for the UM 100 module.
223 */
224 #define FTDI_ELV_UR100_PID 0xFB58 /* USB-RS232-Umsetzer (UR 100) */
225 #define FTDI_ELV_UM100_PID 0xFB5A /* USB-Modul UM 100 */
226 #define FTDI_ELV_UO100_PID 0xFB5B /* USB-Modul UO 100 */
227 #define FTDI_ELV_ALC8500_PID 0xF06E /* ALC 8500 Expert */
228 /* Additional ELV PIDs that default to using the FTDI D2XX drivers on
229 * MS Windows, rather than the FTDI Virtual Com Port drivers.
230 * Maybe these will be easier to use with the libftdi/libusb user-space
231 * drivers, or possibly the Comedi drivers in some cases. */
232 #define FTDI_ELV_CLI7000_PID 0xFB59 /* Computer-Light-Interface (CLI 7000) */
233 #define FTDI_ELV_PPS7330_PID 0xFB5C /* Processor-Power-Supply (PPS 7330) */
234 #define FTDI_ELV_TFM100_PID 0xFB5D /* Temperartur-Feuchte Messgeraet (TFM 100) */
235 #define FTDI_ELV_UDF77_PID 0xFB5E /* USB DCF Funkurh (UDF 77) */
236 #define FTDI_ELV_UIO88_PID 0xFB5F /* USB-I/O Interface (UIO 88) */
237 #define FTDI_ELV_UAD8_PID 0xF068 /* USB-AD-Wandler (UAD 8) */
238 #define FTDI_ELV_UDA7_PID 0xF069 /* USB-DA-Wandler (UDA 7) */
239 #define FTDI_ELV_USI2_PID 0xF06A /* USB-Schrittmotoren-Interface (USI 2) */
240 #define FTDI_ELV_T1100_PID 0xF06B /* Thermometer (T 1100) */
241 #define FTDI_ELV_PCD200_PID 0xF06C /* PC-Datenlogger (PCD 200) */
242 #define FTDI_ELV_ULA200_PID 0xF06D /* USB-LCD-Ansteuerung (ULA 200) */
243 #define FTDI_ELV_FHZ1000PC_PID 0xF06F /* FHZ 1000 PC */
244 #define FTDI_ELV_CSI8_PID 0xE0F0 /* Computer-Schalt-Interface (CSI 8) */
245 #define FTDI_ELV_EM1000DL_PID 0xE0F1 /* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */
246 #define FTDI_ELV_PCK100_PID 0xE0F2 /* PC-Kabeltester (PCK 100) */
247 #define FTDI_ELV_RFP500_PID 0xE0F3 /* HF-Leistungsmesser (RFP 500) */
248 #define FTDI_ELV_FS20SIG_PID 0xE0F4 /* Signalgeber (FS 20 SIG) */
249 #define FTDI_ELV_WS300PC_PID 0xE0F6 /* PC-Wetterstation (WS 300 PC) */
250 #define FTDI_ELV_FHZ1300PC_PID 0xE0E8 /* FHZ 1300 PC */
251 #define FTDI_ELV_WS500_PID 0xE0E9 /* PC-Wetterstation (WS 500) */
252 #define FTDI_ELV_EM1010PC_PID 0xE0EF /* Engery monitor EM 1010 PC */
253
254 /*
255 * Definitions for ID TECH (www.idt-net.com) devices
256 */
257 #define IDTECH_VID 0x0ACD /* ID TECH Vendor ID */
258 #define IDTECH_IDT1221U_PID 0x0300 /* IDT1221U USB to RS-232 adapter */
259
260 /*
261 * Definitions for Omnidirectional Control Technology, Inc. devices
262 */
263 #define OCT_VID 0x0B39 /* OCT vendor ID */
264 /* Note: OCT US101 is also rebadged as Dick Smith Electronics (NZ) XH6381 */
265 /* Also rebadged as Dick Smith Electronics (Aus) XH6451 */
266 /* Also rebadged as SIIG Inc. model US2308 hardware version 1 */
267 #define OCT_US101_PID 0x0421 /* OCT US101 USB to RS-232 */
268
269 /* an infrared receiver for user access control with IR tags */
270 #define FTDI_PIEGROUP_PID 0xF208 /* Product Id */
271
272 /*
273 * Definitions for Artemis astronomical USB based cameras
274 * Check it at http://www.artemisccd.co.uk/
275 */
276 #define FTDI_ARTEMIS_PID 0xDF28 /* All Artemis Cameras */
277
278 /*
279 * Definitions for ATIK Instruments astronomical USB based cameras
280 * Check it at http://www.atik-instruments.com/
281 */
282 #define FTDI_ATIK_ATK16_PID 0xDF30 /* ATIK ATK-16 Grayscale Camera */
283 #define FTDI_ATIK_ATK16C_PID 0xDF32 /* ATIK ATK-16C Colour Camera */
284 #define FTDI_ATIK_ATK16HR_PID 0xDF31 /* ATIK ATK-16HR Grayscale Camera */
285 #define FTDI_ATIK_ATK16HRC_PID 0xDF33 /* ATIK ATK-16HRC Colour Camera */
286 #define FTDI_ATIK_ATK16IC_PID 0xDF35 /* ATIK ATK-16IC Grayscale Camera */
287
288 /*
289 * Protego product ids
290 */
291 #define PROTEGO_SPECIAL_1 0xFC70 /* special/unknown device */
292 #define PROTEGO_R2X0 0xFC71 /* R200-USB TRNG unit (R210, R220, and R230) */
293 #define PROTEGO_SPECIAL_3 0xFC72 /* special/unknown device */
294 #define PROTEGO_SPECIAL_4 0xFC73 /* special/unknown device */
295
296 /*
297 * Gude Analog- und Digitalsysteme GmbH
298 */
299 #define FTDI_GUDEADS_E808_PID 0xE808
300 #define FTDI_GUDEADS_E809_PID 0xE809
301 #define FTDI_GUDEADS_E80A_PID 0xE80A
302 #define FTDI_GUDEADS_E80B_PID 0xE80B
303 #define FTDI_GUDEADS_E80C_PID 0xE80C
304 #define FTDI_GUDEADS_E80D_PID 0xE80D
305 #define FTDI_GUDEADS_E80E_PID 0xE80E
306 #define FTDI_GUDEADS_E80F_PID 0xE80F
307 #define FTDI_GUDEADS_E888_PID 0xE888 /* Expert ISDN Control USB */
308 #define FTDI_GUDEADS_E889_PID 0xE889 /* USB RS-232 OptoBridge */
309 #define FTDI_GUDEADS_E88A_PID 0xE88A
310 #define FTDI_GUDEADS_E88B_PID 0xE88B
311 #define FTDI_GUDEADS_E88C_PID 0xE88C
312 #define FTDI_GUDEADS_E88D_PID 0xE88D
313 #define FTDI_GUDEADS_E88E_PID 0xE88E
314 #define FTDI_GUDEADS_E88F_PID 0xE88F
315
316 /*
317 * Linx Technologies product ids
318 */
319 #define LINX_SDMUSBQSS_PID 0xF448 /* Linx SDM-USB-QS-S */
320 #define LINX_MASTERDEVEL2_PID 0xF449 /* Linx Master Development 2.0 */
321 #define LINX_FUTURE_0_PID 0xF44A /* Linx future device */
322 #define LINX_FUTURE_1_PID 0xF44B /* Linx future device */
323 #define LINX_FUTURE_2_PID 0xF44C /* Linx future device */
324
325 /* CCS Inc. ICDU/ICDU40 product ID - the FT232BM is used in an in-circuit-debugger */
326 /* unit for PIC16's/PIC18's */
327 #define FTDI_CCSICDU20_0_PID 0xF9D0
328 #define FTDI_CCSICDU40_1_PID 0xF9D1
329 #define FTDI_CCSMACHX_2_PID 0xF9D2
330
331 /* Inside Accesso contactless reader (http://www.insidefr.com) */
332 #define INSIDE_ACCESSO 0xFAD0
333
334 /*
335 * Intrepid Control Systems (http://www.intrepidcs.com/) ValueCAN and NeoVI
336 */
337 #define INTREPID_VID 0x093C
338 #define INTREPID_VALUECAN_PID 0x0601
339 #define INTREPID_NEOVI_PID 0x0701
340
341 /*
342 * Falcom Wireless Communications GmbH
343 */
344 #define FALCOM_VID 0x0F94 /* Vendor Id */
345 #define FALCOM_TWIST_PID 0x0001 /* Falcom Twist USB GPRS modem */
346 #define FALCOM_SAMBA_PID 0x0005 /* Falcom Samba USB GPRS modem */
347
348 /*
349 * SUUNTO product ids
350 */
351 #define FTDI_SUUNTO_SPORTS_PID 0xF680 /* Suunto Sports instrument */
352
353 /*
354 * TTi (Thurlby Thandar Instruments)
355 */
356 #define TTI_VID 0x103E /* Vendor Id */
357 #define TTI_QL355P_PID 0x03E8 /* TTi QL355P power supply */
358
359 /*
360 * Definitions for B&B Electronics products.
361 */
362 #define BANDB_VID 0x0856 /* B&B Electronics Vendor ID */
363 #define BANDB_USOTL4_PID 0xAC01 /* USOTL4 Isolated RS-485 Converter */
364 #define BANDB_USTL4_PID 0xAC02 /* USTL4 RS-485 Converter */
365 #define BANDB_USO9ML2_PID 0xAC03 /* USO9ML2 Isolated RS-232 Converter */
366
367 /*
368 * RM Michaelides CANview USB (http://www.rmcan.com)
369 * CAN fieldbus interface adapter, added by port GmbH www.port.de)
370 * Ian Abbott changed the macro names for consistency.
371 */
372 #define FTDI_RM_CANVIEW_PID 0xfd60 /* Product Id */
373
374 /*
375 * EVER Eco Pro UPS (http://www.ever.com.pl/)
376 */
377
378 #define EVER_ECO_PRO_CDS 0xe520 /* RS-232 converter */
379
380 /*
381 * 4N-GALAXY.DE PIDs for CAN-USB, USB-RS232, USB-RS422, USB-RS485,
382 * USB-TTY activ, USB-TTY passiv. Some PIDs are used by several devices
383 * and I'm not entirely sure which are used by which.
384 */
385 #define FTDI_4N_GALAXY_DE_1_PID 0xF3C0
386 #define FTDI_4N_GALAXY_DE_2_PID 0xF3C1
387
388 /*
389 * Mobility Electronics products.
390 */
391 #define MOBILITY_VID 0x1342
392 #define MOBILITY_USB_SERIAL_PID 0x0202 /* EasiDock USB 200 serial */
393
394 /*
395 * microHAM product IDs (http://www.microham.com).
396 * Submitted by Justin Burket (KL1RL) <zorton@jtan.com>
397 * and Mike Studer (K6EEP) <k6eep@hamsoftware.org>.
398 * Ian Abbott <abbotti@mev.co.uk> added a few more from the driver INF file.
399 */
400 #define FTDI_MHAM_KW_PID 0xEEE8 /* USB-KW interface */
401 #define FTDI_MHAM_YS_PID 0xEEE9 /* USB-YS interface */
402 #define FTDI_MHAM_Y6_PID 0xEEEA /* USB-Y6 interface */
403 #define FTDI_MHAM_Y8_PID 0xEEEB /* USB-Y8 interface */
404 #define FTDI_MHAM_IC_PID 0xEEEC /* USB-IC interface */
405 #define FTDI_MHAM_DB9_PID 0xEEED /* USB-DB9 interface */
406 #define FTDI_MHAM_RS232_PID 0xEEEE /* USB-RS232 interface */
407 #define FTDI_MHAM_Y9_PID 0xEEEF /* USB-Y9 interface */
408
409 /*
410 * Active Robots product ids.
411 */
412 #define FTDI_ACTIVE_ROBOTS_PID 0xE548 /* USB comms board */
413
414 /*
415 * Xsens Technologies BV products (http://www.xsens.com).
416 */
417 #define XSENS_CONVERTER_0_PID 0xD388
418 #define XSENS_CONVERTER_1_PID 0xD389
419 #define XSENS_CONVERTER_2_PID 0xD38A
420 #define XSENS_CONVERTER_3_PID 0xD38B
421 #define XSENS_CONVERTER_4_PID 0xD38C
422 #define XSENS_CONVERTER_5_PID 0xD38D
423 #define XSENS_CONVERTER_6_PID 0xD38E
424 #define XSENS_CONVERTER_7_PID 0xD38F
425
426 /*
427 * Teratronik product ids.
428 * Submitted by O. Wölfelschneider.
429 */
430 #define FTDI_TERATRONIK_VCP_PID 0xEC88 /* Teratronik device (preferring VCP driver on windows) */
431 #define FTDI_TERATRONIK_D2XX_PID 0xEC89 /* Teratronik device (preferring D2XX driver on windows) */
432
433 /*
434 * Evolution Robotics products (http://www.evolution.com/).
435 * Submitted by Shawn M. Lavelle.
436 */
437 #define EVOLUTION_VID 0xDEEE /* Vendor ID */
438 #define EVOLUTION_ER1_PID 0x0300 /* ER1 Control Module */
439 #define EVO_8U232AM_PID 0x02FF /* Evolution robotics RCM2 (FT232AM)*/
440 #define EVO_HYBRID_PID 0x0302 /* Evolution robotics RCM4 PID (FT232BM)*/
441 #define EVO_RCM4_PID 0x0303 /* Evolution robotics RCM4 PID */
442
443 /* Pyramid Computer GmbH */
444 #define FTDI_PYRAMID_PID 0xE6C8 /* Pyramid Appliance Display */
445
446 /*
447 * Posiflex inc retail equipment (http://www.posiflex.com.tw)
448 */
449 #define POSIFLEX_VID 0x0d3a /* Vendor ID */
450 #define POSIFLEX_PP7000_PID 0x0300 /* PP-7000II thermal printer */
451
452 /*
453 * Westrex International devices submitted by Cory Lee
454 */
455 #define FTDI_WESTREX_MODEL_777_PID 0xDC00 /* Model 777 */
456 #define FTDI_WESTREX_MODEL_8900F_PID 0xDC01 /* Model 8900F */
457
458 /*
459 * RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com)
460 */
461 #define FTDI_RRCIRKITS_LOCOBUFFER_PID 0xc7d0 /* LocoBuffer USB */
462
463 /*
464 * Eclo (http://www.eclo.pt/) product IDs.
465 * PID 0xEA90 submitted by Martin Grill.
466 */
467 #define FTDI_ECLO_COM_1WIRE_PID 0xEA90 /* COM to 1-Wire USB adaptor */
468
469 /*
470 * Papouch products (http://www.papouch.com/)
471 * Submitted by Folkert van Heusden
472 */
473
474 #define PAPOUCH_VID 0x5050 /* Vendor ID */
475 #define PAPOUCH_TMU_PID 0x0400 /* TMU USB Thermometer */
476
477 /*
478 * ACG Identification Technologies GmbH products (http://www.acg.de/).
479 * Submitted by anton -at- goto10 -dot- org.
480 */
481 #define FTDI_ACG_HFDUAL_PID 0xDD20 /* HF Dual ISO Reader (RFID) */
482
483 /*
484 * Yost Engineering, Inc. products (www.yostengineering.com).
485 * PID 0xE050 submitted by Aaron Prose.
486 */
487 #define FTDI_YEI_SERVOCENTER31_PID 0xE050 /* YEI ServoCenter3.1 USB */
488
489 /*
490 * ThorLabs USB motor drivers
491 */
492 #define FTDI_THORLABS_PID 0xfaf0 /* ThorLabs USB motor drivers */
493
494 /*
495 * Testo products (http://www.testo.com/)
496 * Submitted by Colin Leroy
497 */
498 #define TESTO_VID 0x128D
499 #define TESTO_USB_INTERFACE_PID 0x0001
500
501 /*
502 * Gamma Scout (http://gamma-scout.com/). Submitted by rsc@runtux.com.
503 */
504 #define FTDI_GAMMA_SCOUT_PID 0xD678 /* Gamma Scout online */
505
506 /*
507 * Tactrix OpenPort (ECU) devices.
508 * OpenPort 1.3M submitted by Donour Sizemore.
509 * OpenPort 1.3S and 1.3U submitted by Ian Abbott.
510 */
511 #define FTDI_TACTRIX_OPENPORT_13M_PID 0xCC48 /* OpenPort 1.3 Mitsubishi */
512 #define FTDI_TACTRIX_OPENPORT_13S_PID 0xCC49 /* OpenPort 1.3 Subaru */
513 #define FTDI_TACTRIX_OPENPORT_13U_PID 0xCC4A /* OpenPort 1.3 Universal */
514
515 /*
516 * Telldus Technologies
517 */
518 #define TELLDUS_VID 0x1781 /* Vendor ID */
519 #define TELLDUS_TELLSTICK_PID 0x0C30 /* RF control dongle 433 MHz using FT232RL */
520
521 /*
522 * IBS elektronik product ids
523 * Submitted by Thomas Schleusener
524 */
525 #define FTDI_IBS_US485_PID 0xff38 /* IBS US485 (USB<-->RS422/485 interface) */
526 #define FTDI_IBS_PICPRO_PID 0xff39 /* IBS PIC-Programmer */
527 #define FTDI_IBS_PCMCIA_PID 0xff3a /* IBS Card reader for PCMCIA SRAM-cards */
528 #define FTDI_IBS_PK1_PID 0xff3b /* IBS PK1 - Particel counter */
529 #define FTDI_IBS_RS232MON_PID 0xff3c /* IBS RS232 - Monitor */
530 #define FTDI_IBS_APP70_PID 0xff3d /* APP 70 (dust monitoring system) */
531 #define FTDI_IBS_PEDO_PID 0xff3e /* IBS PEDO-Modem (RF modem 868.35 MHz) */
532 #define FTDI_IBS_PROD_PID 0xff3f /* future device */
533
534 /*
535 * MaxStream devices www.maxstream.net
536 */
537 #define FTDI_MAXSTREAM_PID 0xEE18 /* Xbee PKG-U Module */
538
539 /* Olimex */
540 #define OLIMEX_VID 0x15BA
541 #define OLIMEX_ARM_USB_OCD_PID 0x0003
542
543 /* www.elsterelectricity.com Elster Unicom III Optical Probe */
544 #define FTDI_ELSTER_UNICOM_PID 0xE700 /* Product Id */
545
546 /*
547 * The Mobility Lab (TML)
548 * Submitted by Pierre Castella
549 */
550 #define TML_VID 0x1B91 /* Vendor ID */
551 #define TML_USB_SERIAL_PID 0x0064 /* USB - Serial Converter */
552
553 /* Commands */
554 #define FTDI_SIO_RESET 0 /* Reset the port */
555 #define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */
556 #define FTDI_SIO_SET_FLOW_CTRL 2 /* Set flow control register */
557 #define FTDI_SIO_SET_BAUD_RATE 3 /* Set baud rate */
558 #define FTDI_SIO_SET_DATA 4 /* Set the data characteristics of the port */
559 #define FTDI_SIO_GET_MODEM_STATUS 5 /* Retrieve current value of modern status register */
560 #define FTDI_SIO_SET_EVENT_CHAR 6 /* Set the event character */
561 #define FTDI_SIO_SET_ERROR_CHAR 7 /* Set the error character */
562 #define FTDI_SIO_SET_LATENCY_TIMER 9 /* Set the latency timer */
563 #define FTDI_SIO_GET_LATENCY_TIMER 10 /* Get the latency timer */
564
565
566 /*
567 * FIC / OpenMoko, Inc. http://wiki.openmoko.org/wiki/Neo1973_Debug_Board_v3
568 * Submitted by Harald Welte <laforge@openmoko.org>
569 */
570 #define FIC_VID 0x1457
571 #define FIC_NEO1973_DEBUG_PID 0x5118
572
573 /*
574 * BmRequestType: 1100 0000b
575 * bRequest: FTDI_E2_READ
576 * wValue: 0
577 * wIndex: Address of word to read
578 * wLength: 2
579 * Data: Will return a word of data from E2Address
580 *
581 */
582
583 /* Port Identifier Table */
584 #define PIT_DEFAULT 0 /* SIOA */
585 #define PIT_SIOA 1 /* SIOA */
586 /* The device this driver is tested with one has only one port */
587 #define PIT_SIOB 2 /* SIOB */
588 #define PIT_PARALLEL 3 /* Parallel */
589
590 /* FTDI_SIO_RESET */
591 #define FTDI_SIO_RESET_REQUEST FTDI_SIO_RESET
592 #define FTDI_SIO_RESET_REQUEST_TYPE 0x40
593 #define FTDI_SIO_RESET_SIO 0
594 #define FTDI_SIO_RESET_PURGE_RX 1
595 #define FTDI_SIO_RESET_PURGE_TX 2
596
597 /*
598 * BmRequestType: 0100 0000B
599 * bRequest: FTDI_SIO_RESET
600 * wValue: Control Value
601 * 0 = Reset SIO
602 * 1 = Purge RX buffer
603 * 2 = Purge TX buffer
604 * wIndex: Port
605 * wLength: 0
606 * Data: None
607 *
608 * The Reset SIO command has this effect:
609 *
610 * Sets flow control set to 'none'
611 * Event char = $0D
612 * Event trigger = disabled
613 * Purge RX buffer
614 * Purge TX buffer
615 * Clear DTR
616 * Clear RTS
617 * baud and data format not reset
618 *
619 * The Purge RX and TX buffer commands affect nothing except the buffers
620 *
621 */
622
623 /* FTDI_SIO_SET_BAUDRATE */
624 #define FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE 0x40
625 #define FTDI_SIO_SET_BAUDRATE_REQUEST 3
626
627 /*
628 * BmRequestType: 0100 0000B
629 * bRequest: FTDI_SIO_SET_BAUDRATE
630 * wValue: BaudDivisor value - see below
631 * wIndex: Port
632 * wLength: 0
633 * Data: None
634 * The BaudDivisor values are calculated as follows:
635 * - BaseClock is either 12000000 or 48000000 depending on the device. FIXME: I wish
636 * I knew how to detect old chips to select proper base clock!
637 * - BaudDivisor is a fixed point number encoded in a funny way.
638 * (--WRONG WAY OF THINKING--)
639 * BaudDivisor is a fixed point number encoded with following bit weighs:
640 * (-2)(-1)(13..0). It is a radical with a denominator of 4, so values
641 * end with 0.0 (00...), 0.25 (10...), 0.5 (01...), and 0.75 (11...).
642 * (--THE REALITY--)
643 * The both-bits-set has quite different meaning from 0.75 - the chip designers
644 * have decided it to mean 0.125 instead of 0.75.
645 * This info looked up in FTDI application note "FT8U232 DEVICES \ Data Rates
646 * and Flow Control Consideration for USB to RS232".
647 * - BaudDivisor = (BaseClock / 16) / BaudRate, where the (=) operation should
648 * automagically re-encode the resulting value to take fractions into consideration.
649 * As all values are integers, some bit twiddling is in order:
650 * BaudDivisor = (BaseClock / 16 / BaudRate) |
651 * (((BaseClock / 2 / BaudRate) & 4) ? 0x4000 // 0.5
652 * : ((BaseClock / 2 / BaudRate) & 2) ? 0x8000 // 0.25
653 * : ((BaseClock / 2 / BaudRate) & 1) ? 0xc000 // 0.125
654 * : 0)
655 *
656 * For the FT232BM, a 17th divisor bit was introduced to encode the multiples
657 * of 0.125 missing from the FT8U232AM. Bits 16 to 14 are coded as follows
658 * (the first four codes are the same as for the FT8U232AM, where bit 16 is
659 * always 0):
660 * 000 - add .000 to divisor
661 * 001 - add .500 to divisor
662 * 010 - add .250 to divisor
663 * 011 - add .125 to divisor
664 * 100 - add .375 to divisor
665 * 101 - add .625 to divisor
666 * 110 - add .750 to divisor
667 * 111 - add .875 to divisor
668 * Bits 15 to 0 of the 17-bit divisor are placed in the urb value. Bit 16 is
669 * placed in bit 0 of the urb index.
670 *
671 * Note that there are a couple of special cases to support the highest baud
672 * rates. If the calculated divisor value is 1, this needs to be replaced with
673 * 0. Additionally for the FT232BM, if the calculated divisor value is 0x4001
674 * (1.5), this needs to be replaced with 0x0001 (1) (but this divisor value is
675 * not supported by the FT8U232AM).
676 */
677
678 typedef enum {
679 SIO = 1,
680 FT8U232AM = 2,
681 FT232BM = 3,
682 FT2232C = 4,
683 FT232RL = 5,
684 } ftdi_chip_type_t;
685
686 typedef enum {
687 ftdi_sio_b300 = 0,
688 ftdi_sio_b600 = 1,
689 ftdi_sio_b1200 = 2,
690 ftdi_sio_b2400 = 3,
691 ftdi_sio_b4800 = 4,
692 ftdi_sio_b9600 = 5,
693 ftdi_sio_b19200 = 6,
694 ftdi_sio_b38400 = 7,
695 ftdi_sio_b57600 = 8,
696 ftdi_sio_b115200 = 9
697 } FTDI_SIO_baudrate_t ;
698
699 /*
700 * The ftdi_8U232AM_xxMHz_byyy constants have been removed. The encoded divisor values
701 * are calculated internally.
702 */
703
704 #define FTDI_SIO_SET_DATA_REQUEST FTDI_SIO_SET_DATA
705 #define FTDI_SIO_SET_DATA_REQUEST_TYPE 0x40
706 #define FTDI_SIO_SET_DATA_PARITY_NONE (0x0 << 8 )
707 #define FTDI_SIO_SET_DATA_PARITY_ODD (0x1 << 8 )
708 #define FTDI_SIO_SET_DATA_PARITY_EVEN (0x2 << 8 )
709 #define FTDI_SIO_SET_DATA_PARITY_MARK (0x3 << 8 )
710 #define FTDI_SIO_SET_DATA_PARITY_SPACE (0x4 << 8 )
711 #define FTDI_SIO_SET_DATA_STOP_BITS_1 (0x0 << 11 )
712 #define FTDI_SIO_SET_DATA_STOP_BITS_15 (0x1 << 11 )
713 #define FTDI_SIO_SET_DATA_STOP_BITS_2 (0x2 << 11 )
714 #define FTDI_SIO_SET_BREAK (0x1 << 14)
715 /* FTDI_SIO_SET_DATA */
716
717 /*
718 * BmRequestType: 0100 0000B
719 * bRequest: FTDI_SIO_SET_DATA
720 * wValue: Data characteristics (see below)
721 * wIndex: Port
722 * wLength: 0
723 * Data: No
724 *
725 * Data characteristics
726 *
727 * B0..7 Number of data bits
728 * B8..10 Parity
729 * 0 = None
730 * 1 = Odd
731 * 2 = Even
732 * 3 = Mark
733 * 4 = Space
734 * B11..13 Stop Bits
735 * 0 = 1
736 * 1 = 1.5
737 * 2 = 2
738 * B14
739 * 1 = TX ON (break)
740 * 0 = TX OFF (normal state)
741 * B15 Reserved
742 *
743 */
744
745
746
747 /* FTDI_SIO_MODEM_CTRL */
748 #define FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE 0x40
749 #define FTDI_SIO_SET_MODEM_CTRL_REQUEST FTDI_SIO_MODEM_CTRL
750
751 /*
752 * BmRequestType: 0100 0000B
753 * bRequest: FTDI_SIO_MODEM_CTRL
754 * wValue: ControlValue (see below)
755 * wIndex: Port
756 * wLength: 0
757 * Data: None
758 *
759 * NOTE: If the device is in RTS/CTS flow control, the RTS set by this
760 * command will be IGNORED without an error being returned
761 * Also - you can not set DTR and RTS with one control message
762 */
763
764 #define FTDI_SIO_SET_DTR_MASK 0x1
765 #define FTDI_SIO_SET_DTR_HIGH ( 1 | ( FTDI_SIO_SET_DTR_MASK << 8))
766 #define FTDI_SIO_SET_DTR_LOW ( 0 | ( FTDI_SIO_SET_DTR_MASK << 8))
767 #define FTDI_SIO_SET_RTS_MASK 0x2
768 #define FTDI_SIO_SET_RTS_HIGH ( 2 | ( FTDI_SIO_SET_RTS_MASK << 8 ))
769 #define FTDI_SIO_SET_RTS_LOW ( 0 | ( FTDI_SIO_SET_RTS_MASK << 8 ))
770
771 /*
772 * ControlValue
773 * B0 DTR state
774 * 0 = reset
775 * 1 = set
776 * B1 RTS state
777 * 0 = reset
778 * 1 = set
779 * B2..7 Reserved
780 * B8 DTR state enable
781 * 0 = ignore
782 * 1 = use DTR state
783 * B9 RTS state enable
784 * 0 = ignore
785 * 1 = use RTS state
786 * B10..15 Reserved
787 */
788
789 /* FTDI_SIO_SET_FLOW_CTRL */
790 #define FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE 0x40
791 #define FTDI_SIO_SET_FLOW_CTRL_REQUEST FTDI_SIO_SET_FLOW_CTRL
792 #define FTDI_SIO_DISABLE_FLOW_CTRL 0x0
793 #define FTDI_SIO_RTS_CTS_HS (0x1 << 8)
794 #define FTDI_SIO_DTR_DSR_HS (0x2 << 8)
795 #define FTDI_SIO_XON_XOFF_HS (0x4 << 8)
796 /*
797 * BmRequestType: 0100 0000b
798 * bRequest: FTDI_SIO_SET_FLOW_CTRL
799 * wValue: Xoff/Xon
800 * wIndex: Protocol/Port - hIndex is protocl / lIndex is port
801 * wLength: 0
802 * Data: None
803 *
804 * hIndex protocol is:
805 * B0 Output handshaking using RTS/CTS
806 * 0 = disabled
807 * 1 = enabled
808 * B1 Output handshaking using DTR/DSR
809 * 0 = disabled
810 * 1 = enabled
811 * B2 Xon/Xoff handshaking
812 * 0 = disabled
813 * 1 = enabled
814 *
815 * A value of zero in the hIndex field disables handshaking
816 *
817 * If Xon/Xoff handshaking is specified, the hValue field should contain the XOFF character
818 * and the lValue field contains the XON character.
819 */
820
821 /*
822 * FTDI_SIO_GET_LATENCY_TIMER
823 *
824 * Set the timeout interval. The FTDI collects data from the slave
825 * device, transmitting it to the host when either A) 62 bytes are
826 * received, or B) the timeout interval has elapsed and the buffer
827 * contains at least 1 byte. Setting this value to a small number
828 * can dramatically improve performance for applications which send
829 * small packets, since the default value is 16ms.
830 */
831 #define FTDI_SIO_GET_LATENCY_TIMER_REQUEST FTDI_SIO_GET_LATENCY_TIMER
832 #define FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE 0xC0
833
834 /*
835 * BmRequestType: 1100 0000b
836 * bRequest: FTDI_SIO_GET_LATENCY_TIMER
837 * wValue: 0
838 * wIndex: Port
839 * wLength: 0
840 * Data: latency (on return)
841 */
842
843 /*
844 * FTDI_SIO_SET_LATENCY_TIMER
845 *
846 * Set the timeout interval. The FTDI collects data from the slave
847 * device, transmitting it to the host when either A) 62 bytes are
848 * received, or B) the timeout interval has elapsed and the buffer
849 * contains at least 1 byte. Setting this value to a small number
850 * can dramatically improve performance for applications which send
851 * small packets, since the default value is 16ms.
852 */
853 #define FTDI_SIO_SET_LATENCY_TIMER_REQUEST FTDI_SIO_SET_LATENCY_TIMER
854 #define FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE 0x40
855
856 /*
857 * BmRequestType: 0100 0000b
858 * bRequest: FTDI_SIO_SET_LATENCY_TIMER
859 * wValue: Latency (milliseconds)
860 * wIndex: Port
861 * wLength: 0
862 * Data: None
863 *
864 * wValue:
865 * B0..7 Latency timer
866 * B8..15 0
867 *
868 */
869
870 /*
871 * FTDI_SIO_SET_EVENT_CHAR
872 *
873 * Set the special event character for the specified communications port.
874 * If the device sees this character it will immediately return the
875 * data read so far - rather than wait 40ms or until 62 bytes are read
876 * which is what normally happens.
877 */
878
879
880 #define FTDI_SIO_SET_EVENT_CHAR_REQUEST FTDI_SIO_SET_EVENT_CHAR
881 #define FTDI_SIO_SET_EVENT_CHAR_REQUEST_TYPE 0x40
882
883
884 /*
885 * BmRequestType: 0100 0000b
886 * bRequest: FTDI_SIO_SET_EVENT_CHAR
887 * wValue: EventChar
888 * wIndex: Port
889 * wLength: 0
890 * Data: None
891 *
892 * wValue:
893 * B0..7 Event Character
894 * B8 Event Character Processing
895 * 0 = disabled
896 * 1 = enabled
897 * B9..15 Reserved
898 *
899 */
900
901 /* FTDI_SIO_SET_ERROR_CHAR */
902
903 /* Set the parity error replacement character for the specified communications port */
904
905 /*
906 * BmRequestType: 0100 0000b
907 * bRequest: FTDI_SIO_SET_EVENT_CHAR
908 * wValue: Error Char
909 * wIndex: Port
910 * wLength: 0
911 * Data: None
912 *
913 *Error Char
914 * B0..7 Error Character
915 * B8 Error Character Processing
916 * 0 = disabled
917 * 1 = enabled
918 * B9..15 Reserved
919 *
920 */
921
922 /* FTDI_SIO_GET_MODEM_STATUS */
923 /* Retrieve the current value of the modem status register */
924
925 #define FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE 0xc0
926 #define FTDI_SIO_GET_MODEM_STATUS_REQUEST FTDI_SIO_GET_MODEM_STATUS
927 #define FTDI_SIO_CTS_MASK 0x10
928 #define FTDI_SIO_DSR_MASK 0x20
929 #define FTDI_SIO_RI_MASK 0x40
930 #define FTDI_SIO_RLSD_MASK 0x80
931 /*
932 * BmRequestType: 1100 0000b
933 * bRequest: FTDI_SIO_GET_MODEM_STATUS
934 * wValue: zero
935 * wIndex: Port
936 * wLength: 1
937 * Data: Status
938 *
939 * One byte of data is returned
940 * B0..3 0
941 * B4 CTS
942 * 0 = inactive
943 * 1 = active
944 * B5 DSR
945 * 0 = inactive
946 * 1 = active
947 * B6 Ring Indicator (RI)
948 * 0 = inactive
949 * 1 = active
950 * B7 Receive Line Signal Detect (RLSD)
951 * 0 = inactive
952 * 1 = active
953 */
954
955
956
957 /* Descriptors returned by the device
958 *
959 * Device Descriptor
960 *
961 * Offset Field Size Value Description
962 * 0 bLength 1 0x12 Size of descriptor in bytes
963 * 1 bDescriptorType 1 0x01 DEVICE Descriptor Type
964 * 2 bcdUSB 2 0x0110 USB Spec Release Number
965 * 4 bDeviceClass 1 0x00 Class Code
966 * 5 bDeviceSubClass 1 0x00 SubClass Code
967 * 6 bDeviceProtocol 1 0x00 Protocol Code
968 * 7 bMaxPacketSize0 1 0x08 Maximum packet size for endpoint 0
969 * 8 idVendor 2 0x0403 Vendor ID
970 * 10 idProduct 2 0x8372 Product ID (FTDI_SIO_PID)
971 * 12 bcdDevice 2 0x0001 Device release number
972 * 14 iManufacturer 1 0x01 Index of man. string desc
973 * 15 iProduct 1 0x02 Index of prod string desc
974 * 16 iSerialNumber 1 0x02 Index of serial nmr string desc
975 * 17 bNumConfigurations 1 0x01 Number of possible configurations
976 *
977 * Configuration Descriptor
978 *
979 * Offset Field Size Value
980 * 0 bLength 1 0x09 Size of descriptor in bytes
981 * 1 bDescriptorType 1 0x02 CONFIGURATION Descriptor Type
982 * 2 wTotalLength 2 0x0020 Total length of data
983 * 4 bNumInterfaces 1 0x01 Number of interfaces supported
984 * 5 bConfigurationValue 1 0x01 Argument for SetCOnfiguration() req
985 * 6 iConfiguration 1 0x02 Index of config string descriptor
986 * 7 bmAttributes 1 0x20 Config characteristics Remote Wakeup
987 * 8 MaxPower 1 0x1E Max power consumption
988 *
989 * Interface Descriptor
990 *
991 * Offset Field Size Value
992 * 0 bLength 1 0x09 Size of descriptor in bytes
993 * 1 bDescriptorType 1 0x04 INTERFACE Descriptor Type
994 * 2 bInterfaceNumber 1 0x00 Number of interface
995 * 3 bAlternateSetting 1 0x00 Value used to select alternate
996 * 4 bNumEndpoints 1 0x02 Number of endpoints
997 * 5 bInterfaceClass 1 0xFF Class Code
998 * 6 bInterfaceSubClass 1 0xFF Subclass Code
999 * 7 bInterfaceProtocol 1 0xFF Protocol Code
1000 * 8 iInterface 1 0x02 Index of interface string description
1001 *
1002 * IN Endpoint Descriptor
1003 *
1004 * Offset Field Size Value
1005 * 0 bLength 1 0x07 Size of descriptor in bytes
1006 * 1 bDescriptorType 1 0x05 ENDPOINT descriptor type
1007 * 2 bEndpointAddress 1 0x82 Address of endpoint
1008 * 3 bmAttributes 1 0x02 Endpoint attributes - Bulk
1009 * 4 bNumEndpoints 2 0x0040 maximum packet size
1010 * 5 bInterval 1 0x00 Interval for polling endpoint
1011 *
1012 * OUT Endpoint Descriptor
1013 *
1014 * Offset Field Size Value
1015 * 0 bLength 1 0x07 Size of descriptor in bytes
1016 * 1 bDescriptorType 1 0x05 ENDPOINT descriptor type
1017 * 2 bEndpointAddress 1 0x02 Address of endpoint
1018 * 3 bmAttributes 1 0x02 Endpoint attributes - Bulk
1019 * 4 bNumEndpoints 2 0x0040 maximum packet size
1020 * 5 bInterval 1 0x00 Interval for polling endpoint
1021 *
1022 * DATA FORMAT
1023 *
1024 * IN Endpoint
1025 *
1026 * The device reserves the first two bytes of data on this endpoint to contain the current
1027 * values of the modem and line status registers. In the absence of data, the device
1028 * generates a message consisting of these two status bytes every 40 ms
1029 *
1030 * Byte 0: Modem Status
1031 *
1032 * Offset Description
1033 * B0 Reserved - must be 1
1034 * B1 Reserved - must be 0
1035 * B2 Reserved - must be 0
1036 * B3 Reserved - must be 0
1037 * B4 Clear to Send (CTS)
1038 * B5 Data Set Ready (DSR)
1039 * B6 Ring Indicator (RI)
1040 * B7 Receive Line Signal Detect (RLSD)
1041 *
1042 * Byte 1: Line Status
1043 *
1044 * Offset Description
1045 * B0 Data Ready (DR)
1046 * B1 Overrun Error (OE)
1047 * B2 Parity Error (PE)
1048 * B3 Framing Error (FE)
1049 * B4 Break Interrupt (BI)
1050 * B5 Transmitter Holding Register (THRE)
1051 * B6 Transmitter Empty (TEMT)
1052 * B7 Error in RCVR FIFO
1053 *
1054 */
1055 #define FTDI_RS0_CTS (1 << 4)
1056 #define FTDI_RS0_DSR (1 << 5)
1057 #define FTDI_RS0_RI (1 << 6)
1058 #define FTDI_RS0_RLSD (1 << 7)
1059
1060 #define FTDI_RS_DR 1
1061 #define FTDI_RS_OE (1<<1)
1062 #define FTDI_RS_PE (1<<2)
1063 #define FTDI_RS_FE (1<<3)
1064 #define FTDI_RS_BI (1<<4)
1065 #define FTDI_RS_THRE (1<<5)
1066 #define FTDI_RS_TEMT (1<<6)
1067 #define FTDI_RS_FIFO (1<<7)
1068
1069 /*
1070 * OUT Endpoint
1071 *
1072 * This device reserves the first bytes of data on this endpoint contain the length
1073 * and port identifier of the message. For the FTDI USB Serial converter the port
1074 * identifier is always 1.
1075 *
1076 * Byte 0: Line Status
1077 *
1078 * Offset Description
1079 * B0 Reserved - must be 1
1080 * B1 Reserved - must be 0
1081 * B2..7 Length of message - (not including Byte 0)
1082 *
1083 */
1084
WRT350N Kernel Patches