Initial commit

[wrt350n-kernel.git] / include / asm-arm / arch-pxa / pxa-regs.h

/*
 *  linux/include/asm-arm/arch-pxa/pxa-regs.h
 *
 *  Author:     Nicolas Pitre
 *  Created:    Jun 15, 2001
 *  Copyright:  MontaVista Software Inc.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#ifndef __PXA_REGS_H
#define __PXA_REGS_H


/*
 * PXA Chip selects
 */

#define PXA_CS0_PHYS    0x00000000
#define PXA_CS1_PHYS    0x04000000
#define PXA_CS2_PHYS    0x08000000
#define PXA_CS3_PHYS    0x0C000000
#define PXA_CS4_PHYS    0x10000000
#define PXA_CS5_PHYS    0x14000000


/*
 * Personal Computer Memory Card International Association (PCMCIA) sockets
 */

#define PCMCIAPrtSp     0x04000000      /* PCMCIA Partition Space [byte]   */
#define PCMCIASp        (4*PCMCIAPrtSp) /* PCMCIA Space [byte]             */
#define PCMCIAIOSp      PCMCIAPrtSp     /* PCMCIA I/O Space [byte]         */
#define PCMCIAAttrSp    PCMCIAPrtSp     /* PCMCIA Attribute Space [byte]   */
#define PCMCIAMemSp     PCMCIAPrtSp     /* PCMCIA Memory Space [byte]      */

#define PCMCIA0Sp       PCMCIASp        /* PCMCIA 0 Space [byte]           */
#define PCMCIA0IOSp     PCMCIAIOSp      /* PCMCIA 0 I/O Space [byte]       */
#define PCMCIA0AttrSp   PCMCIAAttrSp    /* PCMCIA 0 Attribute Space [byte] */
#define PCMCIA0MemSp    PCMCIAMemSp     /* PCMCIA 0 Memory Space [byte]    */

#define PCMCIA1Sp       PCMCIASp        /* PCMCIA 1 Space [byte]           */
#define PCMCIA1IOSp     PCMCIAIOSp      /* PCMCIA 1 I/O Space [byte]       */
#define PCMCIA1AttrSp   PCMCIAAttrSp    /* PCMCIA 1 Attribute Space [byte] */
#define PCMCIA1MemSp    PCMCIAMemSp     /* PCMCIA 1 Memory Space [byte]    */

#define _PCMCIA(Nb)                     /* PCMCIA [0..1]                   */ \
                        (0x20000000 + (Nb)*PCMCIASp)
#define _PCMCIAIO(Nb)   _PCMCIA (Nb)    /* PCMCIA I/O [0..1]               */
#define _PCMCIAAttr(Nb)                 /* PCMCIA Attribute [0..1]         */ \
                        (_PCMCIA (Nb) + 2*PCMCIAPrtSp)
#define _PCMCIAMem(Nb)                  /* PCMCIA Memory [0..1]            */ \
                        (_PCMCIA (Nb) + 3*PCMCIAPrtSp)

#define _PCMCIA0        _PCMCIA (0)     /* PCMCIA 0                        */
#define _PCMCIA0IO      _PCMCIAIO (0)   /* PCMCIA 0 I/O                    */
#define _PCMCIA0Attr    _PCMCIAAttr (0) /* PCMCIA 0 Attribute              */
#define _PCMCIA0Mem     _PCMCIAMem (0)  /* PCMCIA 0 Memory                 */

#define _PCMCIA1        _PCMCIA (1)     /* PCMCIA 1                        */
#define _PCMCIA1IO      _PCMCIAIO (1)   /* PCMCIA 1 I/O                    */
#define _PCMCIA1Attr    _PCMCIAAttr (1) /* PCMCIA 1 Attribute              */
#define _PCMCIA1Mem     _PCMCIAMem (1)  /* PCMCIA 1 Memory                 */



/*
 * DMA Controller
 */

#define DCSR0           __REG(0x40000000)  /* DMA Control / Status Register for Channel 0 */
#define DCSR1           __REG(0x40000004)  /* DMA Control / Status Register for Channel 1 */
#define DCSR2           __REG(0x40000008)  /* DMA Control / Status Register for Channel 2 */
#define DCSR3           __REG(0x4000000c)  /* DMA Control / Status Register for Channel 3 */
#define DCSR4           __REG(0x40000010)  /* DMA Control / Status Register for Channel 4 */
#define DCSR5           __REG(0x40000014)  /* DMA Control / Status Register for Channel 5 */
#define DCSR6           __REG(0x40000018)  /* DMA Control / Status Register for Channel 6 */
#define DCSR7           __REG(0x4000001c)  /* DMA Control / Status Register for Channel 7 */
#define DCSR8           __REG(0x40000020)  /* DMA Control / Status Register for Channel 8 */
#define DCSR9           __REG(0x40000024)  /* DMA Control / Status Register for Channel 9 */
#define DCSR10          __REG(0x40000028)  /* DMA Control / Status Register for Channel 10 */
#define DCSR11          __REG(0x4000002c)  /* DMA Control / Status Register for Channel 11 */
#define DCSR12          __REG(0x40000030)  /* DMA Control / Status Register for Channel 12 */
#define DCSR13          __REG(0x40000034)  /* DMA Control / Status Register for Channel 13 */
#define DCSR14          __REG(0x40000038)  /* DMA Control / Status Register for Channel 14 */
#define DCSR15          __REG(0x4000003c)  /* DMA Control / Status Register for Channel 15 */

#define DCSR(x)         __REG2(0x40000000, (x) << 2)

#define DCSR_RUN        (1 << 31)       /* Run Bit (read / write) */
#define DCSR_NODESC     (1 << 30)       /* No-Descriptor Fetch (read / write) */
#define DCSR_STOPIRQEN  (1 << 29)       /* Stop Interrupt Enable (read / write) */
#ifdef CONFIG_PXA27x
#define DCSR_EORIRQEN   (1 << 28)       /* End of Receive Interrupt Enable (R/W) */
#define DCSR_EORJMPEN   (1 << 27)       /* Jump to next descriptor on EOR */
#define DCSR_EORSTOPEN  (1 << 26)       /* STOP on an EOR */
#define DCSR_SETCMPST   (1 << 25)       /* Set Descriptor Compare Status */
#define DCSR_CLRCMPST   (1 << 24)       /* Clear Descriptor Compare Status */
#define DCSR_CMPST      (1 << 10)       /* The Descriptor Compare Status */
#define DCSR_EORINTR    (1 << 9)        /* The end of Receive */
#endif
#define DCSR_REQPEND    (1 << 8)        /* Request Pending (read-only) */
#define DCSR_STOPSTATE  (1 << 3)        /* Stop State (read-only) */
#define DCSR_ENDINTR    (1 << 2)        /* End Interrupt (read / write) */
#define DCSR_STARTINTR  (1 << 1)        /* Start Interrupt (read / write) */
#define DCSR_BUSERR     (1 << 0)        /* Bus Error Interrupt (read / write) */

#define DALGN           __REG(0x400000a0)  /* DMA Alignment Register */
#define DINT            __REG(0x400000f0)  /* DMA Interrupt Register */

#define DRCMR(n)        (*(((n) < 64) ? \
                        &__REG2(0x40000100, ((n) & 0x3f) << 2) : \
                        &__REG2(0x40001100, ((n) & 0x3f) << 2)))

#define DRCMR0          __REG(0x40000100)  /* Request to Channel Map Register for DREQ 0 */
#define DRCMR1          __REG(0x40000104)  /* Request to Channel Map Register for DREQ 1 */
#define DRCMR2          __REG(0x40000108)  /* Request to Channel Map Register for I2S receive Request */
#define DRCMR3          __REG(0x4000010c)  /* Request to Channel Map Register for I2S transmit Request */
#define DRCMR4          __REG(0x40000110)  /* Request to Channel Map Register for BTUART receive Request */
#define DRCMR5          __REG(0x40000114)  /* Request to Channel Map Register for BTUART transmit Request. */
#define DRCMR6          __REG(0x40000118)  /* Request to Channel Map Register for FFUART receive Request */
#define DRCMR7          __REG(0x4000011c)  /* Request to Channel Map Register for FFUART transmit Request */
#define DRCMR8          __REG(0x40000120)  /* Request to Channel Map Register for AC97 microphone Request */
#define DRCMR9          __REG(0x40000124)  /* Request to Channel Map Register for AC97 modem receive Request */
#define DRCMR10         __REG(0x40000128)  /* Request to Channel Map Register for AC97 modem transmit Request */
#define DRCMR11         __REG(0x4000012c)  /* Request to Channel Map Register for AC97 audio receive Request */
#define DRCMR12         __REG(0x40000130)  /* Request to Channel Map Register for AC97 audio transmit Request */
#define DRCMR13         __REG(0x40000134)  /* Request to Channel Map Register for SSP receive Request */
#define DRCMR14         __REG(0x40000138)  /* Request to Channel Map Register for SSP transmit Request */
#define DRCMR15         __REG(0x4000013c)  /* Request to Channel Map Register for SSP2 receive Request */
#define DRCMR16         __REG(0x40000140)  /* Request to Channel Map Register for SSP2 transmit Request */
#define DRCMR17         __REG(0x40000144)  /* Request to Channel Map Register for ICP receive Request */
#define DRCMR18         __REG(0x40000148)  /* Request to Channel Map Register for ICP transmit Request */
#define DRCMR19         __REG(0x4000014c)  /* Request to Channel Map Register for STUART receive Request */
#define DRCMR20         __REG(0x40000150)  /* Request to Channel Map Register for STUART transmit Request */
#define DRCMR21         __REG(0x40000154)  /* Request to Channel Map Register for MMC receive Request */
#define DRCMR22         __REG(0x40000158)  /* Request to Channel Map Register for MMC transmit Request */
#define DRCMR23         __REG(0x4000015c)  /* Reserved */
#define DRCMR24         __REG(0x40000160)  /* Reserved */
#define DRCMR25         __REG(0x40000164)  /* Request to Channel Map Register for USB endpoint 1 Request */
#define DRCMR26         __REG(0x40000168)  /* Request to Channel Map Register for USB endpoint 2 Request */
#define DRCMR27         __REG(0x4000016C)  /* Request to Channel Map Register for USB endpoint 3 Request */
#define DRCMR28         __REG(0x40000170)  /* Request to Channel Map Register for USB endpoint 4 Request */
#define DRCMR29         __REG(0x40000174)  /* Reserved */
#define DRCMR30         __REG(0x40000178)  /* Request to Channel Map Register for USB endpoint 6 Request */
#define DRCMR31         __REG(0x4000017C)  /* Request to Channel Map Register for USB endpoint 7 Request */
#define DRCMR32         __REG(0x40000180)  /* Request to Channel Map Register for USB endpoint 8 Request */
#define DRCMR33         __REG(0x40000184)  /* Request to Channel Map Register for USB endpoint 9 Request */
#define DRCMR34         __REG(0x40000188)  /* Reserved */
#define DRCMR35         __REG(0x4000018C)  /* Request to Channel Map Register for USB endpoint 11 Request */
#define DRCMR36         __REG(0x40000190)  /* Request to Channel Map Register for USB endpoint 12 Request */
#define DRCMR37         __REG(0x40000194)  /* Request to Channel Map Register for USB endpoint 13 Request */
#define DRCMR38         __REG(0x40000198)  /* Request to Channel Map Register for USB endpoint 14 Request */
#define DRCMR39         __REG(0x4000019C)  /* Reserved */
#define DRCMR66         __REG(0x40001108)  /* Request to Channel Map Register for SSP3 receive Request */
#define DRCMR67         __REG(0x4000110C)  /* Request to Channel Map Register for SSP3 transmit Request */
#define DRCMR68         __REG(0x40001110)  /* Request to Channel Map Register for Camera FIFO 0 Request */
#define DRCMR69         __REG(0x40001114)  /* Request to Channel Map Register for Camera FIFO 1 Request */
#define DRCMR70         __REG(0x40001118)  /* Request to Channel Map Register for Camera FIFO 2 Request */

#define DRCMRRXSADR     DRCMR2
#define DRCMRTXSADR     DRCMR3
#define DRCMRRXBTRBR    DRCMR4
#define DRCMRTXBTTHR    DRCMR5
#define DRCMRRXFFRBR    DRCMR6
#define DRCMRTXFFTHR    DRCMR7
#define DRCMRRXMCDR     DRCMR8
#define DRCMRRXMODR     DRCMR9
#define DRCMRTXMODR     DRCMR10
#define DRCMRRXPCDR     DRCMR11
#define DRCMRTXPCDR     DRCMR12
#define DRCMRRXSSDR     DRCMR13
#define DRCMRTXSSDR     DRCMR14
#define DRCMRRXSS2DR   DRCMR15
#define DRCMRTXSS2DR   DRCMR16
#define DRCMRRXICDR     DRCMR17
#define DRCMRTXICDR     DRCMR18
#define DRCMRRXSTRBR    DRCMR19
#define DRCMRTXSTTHR    DRCMR20
#define DRCMRRXMMC      DRCMR21
#define DRCMRTXMMC      DRCMR22
#define DRCMRRXSS3DR   DRCMR66
#define DRCMRTXSS3DR   DRCMR67
#define DRCMRUDC(x)     DRCMR((x) + 24)

#define DRCMR_MAPVLD    (1 << 7)        /* Map Valid (read / write) */
#define DRCMR_CHLNUM    0x1f            /* mask for Channel Number (read / write) */

#define DDADR0          __REG(0x40000200)  /* DMA Descriptor Address Register Channel 0 */
#define DSADR0          __REG(0x40000204)  /* DMA Source Address Register Channel 0 */
#define DTADR0          __REG(0x40000208)  /* DMA Target Address Register Channel 0 */
#define DCMD0           __REG(0x4000020c)  /* DMA Command Address Register Channel 0 */
#define DDADR1          __REG(0x40000210)  /* DMA Descriptor Address Register Channel 1 */
#define DSADR1          __REG(0x40000214)  /* DMA Source Address Register Channel 1 */
#define DTADR1          __REG(0x40000218)  /* DMA Target Address Register Channel 1 */
#define DCMD1           __REG(0x4000021c)  /* DMA Command Address Register Channel 1 */
#define DDADR2          __REG(0x40000220)  /* DMA Descriptor Address Register Channel 2 */
#define DSADR2          __REG(0x40000224)  /* DMA Source Address Register Channel 2 */
#define DTADR2          __REG(0x40000228)  /* DMA Target Address Register Channel 2 */
#define DCMD2           __REG(0x4000022c)  /* DMA Command Address Register Channel 2 */
#define DDADR3          __REG(0x40000230)  /* DMA Descriptor Address Register Channel 3 */
#define DSADR3          __REG(0x40000234)  /* DMA Source Address Register Channel 3 */
#define DTADR3          __REG(0x40000238)  /* DMA Target Address Register Channel 3 */
#define DCMD3           __REG(0x4000023c)  /* DMA Command Address Register Channel 3 */
#define DDADR4          __REG(0x40000240)  /* DMA Descriptor Address Register Channel 4 */
#define DSADR4          __REG(0x40000244)  /* DMA Source Address Register Channel 4 */
#define DTADR4          __REG(0x40000248)  /* DMA Target Address Register Channel 4 */
#define DCMD4           __REG(0x4000024c)  /* DMA Command Address Register Channel 4 */
#define DDADR5          __REG(0x40000250)  /* DMA Descriptor Address Register Channel 5 */
#define DSADR5          __REG(0x40000254)  /* DMA Source Address Register Channel 5 */
#define DTADR5          __REG(0x40000258)  /* DMA Target Address Register Channel 5 */
#define DCMD5           __REG(0x4000025c)  /* DMA Command Address Register Channel 5 */
#define DDADR6          __REG(0x40000260)  /* DMA Descriptor Address Register Channel 6 */
#define DSADR6          __REG(0x40000264)  /* DMA Source Address Register Channel 6 */
#define DTADR6          __REG(0x40000268)  /* DMA Target Address Register Channel 6 */
#define DCMD6           __REG(0x4000026c)  /* DMA Command Address Register Channel 6 */
#define DDADR7          __REG(0x40000270)  /* DMA Descriptor Address Register Channel 7 */
#define DSADR7          __REG(0x40000274)  /* DMA Source Address Register Channel 7 */
#define DTADR7          __REG(0x40000278)  /* DMA Target Address Register Channel 7 */
#define DCMD7           __REG(0x4000027c)  /* DMA Command Address Register Channel 7 */
#define DDADR8          __REG(0x40000280)  /* DMA Descriptor Address Register Channel 8 */
#define DSADR8          __REG(0x40000284)  /* DMA Source Address Register Channel 8 */
#define DTADR8          __REG(0x40000288)  /* DMA Target Address Register Channel 8 */
#define DCMD8           __REG(0x4000028c)  /* DMA Command Address Register Channel 8 */
#define DDADR9          __REG(0x40000290)  /* DMA Descriptor Address Register Channel 9 */
#define DSADR9          __REG(0x40000294)  /* DMA Source Address Register Channel 9 */
#define DTADR9          __REG(0x40000298)  /* DMA Target Address Register Channel 9 */
#define DCMD9           __REG(0x4000029c)  /* DMA Command Address Register Channel 9 */
#define DDADR10         __REG(0x400002a0)  /* DMA Descriptor Address Register Channel 10 */
#define DSADR10         __REG(0x400002a4)  /* DMA Source Address Register Channel 10 */
#define DTADR10         __REG(0x400002a8)  /* DMA Target Address Register Channel 10 */
#define DCMD10          __REG(0x400002ac)  /* DMA Command Address Register Channel 10 */
#define DDADR11         __REG(0x400002b0)  /* DMA Descriptor Address Register Channel 11 */
#define DSADR11         __REG(0x400002b4)  /* DMA Source Address Register Channel 11 */
#define DTADR11         __REG(0x400002b8)  /* DMA Target Address Register Channel 11 */
#define DCMD11          __REG(0x400002bc)  /* DMA Command Address Register Channel 11 */
#define DDADR12         __REG(0x400002c0)  /* DMA Descriptor Address Register Channel 12 */
#define DSADR12         __REG(0x400002c4)  /* DMA Source Address Register Channel 12 */
#define DTADR12         __REG(0x400002c8)  /* DMA Target Address Register Channel 12 */
#define DCMD12          __REG(0x400002cc)  /* DMA Command Address Register Channel 12 */
#define DDADR13         __REG(0x400002d0)  /* DMA Descriptor Address Register Channel 13 */
#define DSADR13         __REG(0x400002d4)  /* DMA Source Address Register Channel 13 */
#define DTADR13         __REG(0x400002d8)  /* DMA Target Address Register Channel 13 */
#define DCMD13          __REG(0x400002dc)  /* DMA Command Address Register Channel 13 */
#define DDADR14         __REG(0x400002e0)  /* DMA Descriptor Address Register Channel 14 */
#define DSADR14         __REG(0x400002e4)  /* DMA Source Address Register Channel 14 */
#define DTADR14         __REG(0x400002e8)  /* DMA Target Address Register Channel 14 */
#define DCMD14          __REG(0x400002ec)  /* DMA Command Address Register Channel 14 */
#define DDADR15         __REG(0x400002f0)  /* DMA Descriptor Address Register Channel 15 */
#define DSADR15         __REG(0x400002f4)  /* DMA Source Address Register Channel 15 */
#define DTADR15         __REG(0x400002f8)  /* DMA Target Address Register Channel 15 */
#define DCMD15          __REG(0x400002fc)  /* DMA Command Address Register Channel 15 */

#define DDADR(x)        __REG2(0x40000200, (x) << 4)
#define DSADR(x)        __REG2(0x40000204, (x) << 4)
#define DTADR(x)        __REG2(0x40000208, (x) << 4)
#define DCMD(x)         __REG2(0x4000020c, (x) << 4)

#define DDADR_DESCADDR  0xfffffff0      /* Address of next descriptor (mask) */
#define DDADR_STOP      (1 << 0)        /* Stop (read / write) */

#define DCMD_INCSRCADDR (1 << 31)       /* Source Address Increment Setting. */
#define DCMD_INCTRGADDR (1 << 30)       /* Target Address Increment Setting. */
#define DCMD_FLOWSRC    (1 << 29)       /* Flow Control by the source. */
#define DCMD_FLOWTRG    (1 << 28)       /* Flow Control by the target. */
#define DCMD_STARTIRQEN (1 << 22)       /* Start Interrupt Enable */
#define DCMD_ENDIRQEN   (1 << 21)       /* End Interrupt Enable */
#define DCMD_ENDIAN     (1 << 18)       /* Device Endian-ness. */
#define DCMD_BURST8     (1 << 16)       /* 8 byte burst */
#define DCMD_BURST16    (2 << 16)       /* 16 byte burst */
#define DCMD_BURST32    (3 << 16)       /* 32 byte burst */
#define DCMD_WIDTH1     (1 << 14)       /* 1 byte width */
#define DCMD_WIDTH2     (2 << 14)       /* 2 byte width (HalfWord) */
#define DCMD_WIDTH4     (3 << 14)       /* 4 byte width (Word) */
#define DCMD_LENGTH     0x01fff         /* length mask (max = 8K - 1) */


/*
 * UARTs
 */

/* Full Function UART (FFUART) */
#define FFUART          FFRBR
#define FFRBR           __REG(0x40100000)  /* Receive Buffer Register (read only) */
#define FFTHR           __REG(0x40100000)  /* Transmit Holding Register (write only) */
#define FFIER           __REG(0x40100004)  /* Interrupt Enable Register (read/write) */
#define FFIIR           __REG(0x40100008)  /* Interrupt ID Register (read only) */
#define FFFCR           __REG(0x40100008)  /* FIFO Control Register (write only) */
#define FFLCR           __REG(0x4010000C)  /* Line Control Register (read/write) */
#define FFMCR           __REG(0x40100010)  /* Modem Control Register (read/write) */
#define FFLSR           __REG(0x40100014)  /* Line Status Register (read only) */
#define FFMSR           __REG(0x40100018)  /* Modem Status Register (read only) */
#define FFSPR           __REG(0x4010001C)  /* Scratch Pad Register (read/write) */
#define FFISR           __REG(0x40100020)  /* Infrared Selection Register (read/write) */
#define FFDLL           __REG(0x40100000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
#define FFDLH           __REG(0x40100004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */

/* Bluetooth UART (BTUART) */
#define BTUART          BTRBR
#define BTRBR           __REG(0x40200000)  /* Receive Buffer Register (read only) */
#define BTTHR           __REG(0x40200000)  /* Transmit Holding Register (write only) */
#define BTIER           __REG(0x40200004)  /* Interrupt Enable Register (read/write) */
#define BTIIR           __REG(0x40200008)  /* Interrupt ID Register (read only) */
#define BTFCR           __REG(0x40200008)  /* FIFO Control Register (write only) */
#define BTLCR           __REG(0x4020000C)  /* Line Control Register (read/write) */
#define BTMCR           __REG(0x40200010)  /* Modem Control Register (read/write) */
#define BTLSR           __REG(0x40200014)  /* Line Status Register (read only) */
#define BTMSR           __REG(0x40200018)  /* Modem Status Register (read only) */
#define BTSPR           __REG(0x4020001C)  /* Scratch Pad Register (read/write) */
#define BTISR           __REG(0x40200020)  /* Infrared Selection Register (read/write) */
#define BTDLL           __REG(0x40200000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
#define BTDLH           __REG(0x40200004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */

/* Standard UART (STUART) */
#define STUART          STRBR
#define STRBR           __REG(0x40700000)  /* Receive Buffer Register (read only) */
#define STTHR           __REG(0x40700000)  /* Transmit Holding Register (write only) */
#define STIER           __REG(0x40700004)  /* Interrupt Enable Register (read/write) */
#define STIIR           __REG(0x40700008)  /* Interrupt ID Register (read only) */
#define STFCR           __REG(0x40700008)  /* FIFO Control Register (write only) */
#define STLCR           __REG(0x4070000C)  /* Line Control Register (read/write) */
#define STMCR           __REG(0x40700010)  /* Modem Control Register (read/write) */
#define STLSR           __REG(0x40700014)  /* Line Status Register (read only) */
#define STMSR           __REG(0x40700018)  /* Reserved */
#define STSPR           __REG(0x4070001C)  /* Scratch Pad Register (read/write) */
#define STISR           __REG(0x40700020)  /* Infrared Selection Register (read/write) */
#define STDLL           __REG(0x40700000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
#define STDLH           __REG(0x40700004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */

/* Hardware UART (HWUART) */
#define HWUART          HWRBR
#define HWRBR           __REG(0x41600000)  /* Receive Buffer Register (read only) */
#define HWTHR           __REG(0x41600000)  /* Transmit Holding Register (write only) */
#define HWIER           __REG(0x41600004)  /* Interrupt Enable Register (read/write) */
#define HWIIR           __REG(0x41600008)  /* Interrupt ID Register (read only) */
#define HWFCR           __REG(0x41600008)  /* FIFO Control Register (write only) */
#define HWLCR           __REG(0x4160000C)  /* Line Control Register (read/write) */
#define HWMCR           __REG(0x41600010)  /* Modem Control Register (read/write) */
#define HWLSR           __REG(0x41600014)  /* Line Status Register (read only) */
#define HWMSR           __REG(0x41600018)  /* Modem Status Register (read only) */
#define HWSPR           __REG(0x4160001C)  /* Scratch Pad Register (read/write) */
#define HWISR           __REG(0x41600020)  /* Infrared Selection Register (read/write) */
#define HWFOR           __REG(0x41600024)  /* Receive FIFO Occupancy Register (read only) */
#define HWABR           __REG(0x41600028)  /* Auto-Baud Control Register (read/write) */
#define HWACR           __REG(0x4160002C)  /* Auto-Baud Count Register (read only) */
#define HWDLL           __REG(0x41600000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
#define HWDLH           __REG(0x41600004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */

#define IER_DMAE        (1 << 7)        /* DMA Requests Enable */
#define IER_UUE         (1 << 6)        /* UART Unit Enable */
#define IER_NRZE        (1 << 5)        /* NRZ coding Enable */
#define IER_RTIOE       (1 << 4)        /* Receiver Time Out Interrupt Enable */
#define IER_MIE         (1 << 3)        /* Modem Interrupt Enable */
#define IER_RLSE        (1 << 2)        /* Receiver Line Status Interrupt Enable */
#define IER_TIE         (1 << 1)        /* Transmit Data request Interrupt Enable */
#define IER_RAVIE       (1 << 0)        /* Receiver Data Available Interrupt Enable */

#define IIR_FIFOES1     (1 << 7)        /* FIFO Mode Enable Status */
#define IIR_FIFOES0     (1 << 6)        /* FIFO Mode Enable Status */
#define IIR_TOD         (1 << 3)        /* Time Out Detected */
#define IIR_IID2        (1 << 2)        /* Interrupt Source Encoded */
#define IIR_IID1        (1 << 1)        /* Interrupt Source Encoded */
#define IIR_IP          (1 << 0)        /* Interrupt Pending (active low) */

#define FCR_ITL2        (1 << 7)        /* Interrupt Trigger Level */
#define FCR_ITL1        (1 << 6)        /* Interrupt Trigger Level */
#define FCR_RESETTF     (1 << 2)        /* Reset Transmitter FIFO */
#define FCR_RESETRF     (1 << 1)        /* Reset Receiver FIFO */
#define FCR_TRFIFOE     (1 << 0)        /* Transmit and Receive FIFO Enable */
#define FCR_ITL_1       (0)
#define FCR_ITL_8       (FCR_ITL1)
#define FCR_ITL_16      (FCR_ITL2)
#define FCR_ITL_32      (FCR_ITL2|FCR_ITL1)

#define LCR_DLAB        (1 << 7)        /* Divisor Latch Access Bit */
#define LCR_SB          (1 << 6)        /* Set Break */
#define LCR_STKYP       (1 << 5)        /* Sticky Parity */
#define LCR_EPS         (1 << 4)        /* Even Parity Select */
#define LCR_PEN         (1 << 3)        /* Parity Enable */
#define LCR_STB         (1 << 2)        /* Stop Bit */
#define LCR_WLS1        (1 << 1)        /* Word Length Select */
#define LCR_WLS0        (1 << 0)        /* Word Length Select */

#define LSR_FIFOE       (1 << 7)        /* FIFO Error Status */
#define LSR_TEMT        (1 << 6)        /* Transmitter Empty */
#define LSR_TDRQ        (1 << 5)        /* Transmit Data Request */
#define LSR_BI          (1 << 4)        /* Break Interrupt */
#define LSR_FE          (1 << 3)        /* Framing Error */
#define LSR_PE          (1 << 2)        /* Parity Error */
#define LSR_OE          (1 << 1)        /* Overrun Error */
#define LSR_DR          (1 << 0)        /* Data Ready */

#define MCR_LOOP        (1 << 4)
#define MCR_OUT2        (1 << 3)        /* force MSR_DCD in loopback mode */
#define MCR_OUT1        (1 << 2)        /* force MSR_RI in loopback mode */
#define MCR_RTS         (1 << 1)        /* Request to Send */
#define MCR_DTR         (1 << 0)        /* Data Terminal Ready */

#define MSR_DCD         (1 << 7)        /* Data Carrier Detect */
#define MSR_RI          (1 << 6)        /* Ring Indicator */
#define MSR_DSR         (1 << 5)        /* Data Set Ready */
#define MSR_CTS         (1 << 4)        /* Clear To Send */
#define MSR_DDCD        (1 << 3)        /* Delta Data Carrier Detect */
#define MSR_TERI        (1 << 2)        /* Trailing Edge Ring Indicator */
#define MSR_DDSR        (1 << 1)        /* Delta Data Set Ready */
#define MSR_DCTS        (1 << 0)        /* Delta Clear To Send */

/*
 * IrSR (Infrared Selection Register)
 */
#define STISR_RXPL      (1 << 4)        /* Receive Data Polarity */
#define STISR_TXPL      (1 << 3)        /* Transmit Data Polarity */
#define STISR_XMODE     (1 << 2)        /* Transmit Pulse Width Select */
#define STISR_RCVEIR    (1 << 1)        /* Receiver SIR Enable */
#define STISR_XMITIR    (1 << 0)        /* Transmitter SIR Enable */


/*
 * I2C registers
 */

#define IBMR            __REG(0x40301680)  /* I2C Bus Monitor Register - IBMR */
#define IDBR            __REG(0x40301688)  /* I2C Data Buffer Register - IDBR */
#define ICR             __REG(0x40301690)  /* I2C Control Register - ICR */
#define ISR             __REG(0x40301698)  /* I2C Status Register - ISR */
#define ISAR            __REG(0x403016A0)  /* I2C Slave Address Register - ISAR */

#define PWRIBMR    __REG(0x40f00180)  /* Power I2C Bus Monitor Register-IBMR */
#define PWRIDBR    __REG(0x40f00188)  /* Power I2C Data Buffer Register-IDBR */
#define PWRICR __REG(0x40f00190)  /* Power I2C Control Register - ICR */
#define PWRISR __REG(0x40f00198)  /* Power I2C Status Register - ISR */
#define PWRISAR    __REG(0x40f001A0)  /*Power I2C Slave Address Register-ISAR */

#define ICR_START       (1 << 0)           /* start bit */
#define ICR_STOP        (1 << 1)           /* stop bit */
#define ICR_ACKNAK      (1 << 2)           /* send ACK(0) or NAK(1) */
#define ICR_TB          (1 << 3)           /* transfer byte bit */
#define ICR_MA          (1 << 4)           /* master abort */
#define ICR_SCLE        (1 << 5)           /* master clock enable */
#define ICR_IUE         (1 << 6)           /* unit enable */
#define ICR_GCD         (1 << 7)           /* general call disable */
#define ICR_ITEIE       (1 << 8)           /* enable tx interrupts */
#define ICR_IRFIE       (1 << 9)           /* enable rx interrupts */
#define ICR_BEIE        (1 << 10)          /* enable bus error ints */
#define ICR_SSDIE       (1 << 11)          /* slave STOP detected int enable */
#define ICR_ALDIE       (1 << 12)          /* enable arbitration interrupt */
#define ICR_SADIE       (1 << 13)          /* slave address detected int enable */
#define ICR_UR          (1 << 14)          /* unit reset */

#define ISR_RWM         (1 << 0)           /* read/write mode */
#define ISR_ACKNAK      (1 << 1)           /* ack/nak status */
#define ISR_UB          (1 << 2)           /* unit busy */
#define ISR_IBB         (1 << 3)           /* bus busy */
#define ISR_SSD         (1 << 4)           /* slave stop detected */
#define ISR_ALD         (1 << 5)           /* arbitration loss detected */
#define ISR_ITE         (1 << 6)           /* tx buffer empty */
#define ISR_IRF         (1 << 7)           /* rx buffer full */
#define ISR_GCAD        (1 << 8)           /* general call address detected */
#define ISR_SAD         (1 << 9)           /* slave address detected */
#define ISR_BED         (1 << 10)          /* bus error no ACK/NAK */


/*
 * Serial Audio Controller
 */

#define SACR0           __REG(0x40400000)  /* Global Control Register */
#define SACR1           __REG(0x40400004)  /* Serial Audio I 2 S/MSB-Justified Control Register */
#define SASR0           __REG(0x4040000C)  /* Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */
#define SAIMR           __REG(0x40400014)  /* Serial Audio Interrupt Mask Register */
#define SAICR           __REG(0x40400018)  /* Serial Audio Interrupt Clear Register */
#define SADIV           __REG(0x40400060)  /* Audio Clock Divider Register. */
#define SADR            __REG(0x40400080)  /* Serial Audio Data Register (TX and RX FIFO access Register). */

#define SACR0_RFTH(x)   ((x) << 12)     /* Rx FIFO Interrupt or DMA Trigger Threshold */
#define SACR0_TFTH(x)   ((x) << 8)      /* Tx FIFO Interrupt or DMA Trigger Threshold */
#define SACR0_STRF      (1 << 5)        /* FIFO Select for EFWR Special Function */
#define SACR0_EFWR      (1 << 4)        /* Enable EFWR Function  */
#define SACR0_RST       (1 << 3)        /* FIFO, i2s Register Reset */
#define SACR0_BCKD      (1 << 2)        /* Bit Clock Direction */
#define SACR0_ENB       (1 << 0)        /* Enable I2S Link */
#define SACR1_ENLBF     (1 << 5)        /* Enable Loopback */
#define SACR1_DRPL      (1 << 4)        /* Disable Replaying Function */
#define SACR1_DREC      (1 << 3)        /* Disable Recording Function */
#define SACR1_AMSL      (1 << 0)        /* Specify Alternate Mode */

#define SASR0_I2SOFF    (1 << 7)        /* Controller Status */
#define SASR0_ROR       (1 << 6)        /* Rx FIFO Overrun */
#define SASR0_TUR       (1 << 5)        /* Tx FIFO Underrun */
#define SASR0_RFS       (1 << 4)        /* Rx FIFO Service Request */
#define SASR0_TFS       (1 << 3)        /* Tx FIFO Service Request */
#define SASR0_BSY       (1 << 2)        /* I2S Busy */
#define SASR0_RNE       (1 << 1)        /* Rx FIFO Not Empty */
#define SASR0_TNF       (1 << 0)        /* Tx FIFO Not Empty */

#define SAICR_ROR       (1 << 6)        /* Clear Rx FIFO Overrun Interrupt */
#define SAICR_TUR       (1 << 5)        /* Clear Tx FIFO Underrun Interrupt */

#define SAIMR_ROR       (1 << 6)        /* Enable Rx FIFO Overrun Condition Interrupt */
#define SAIMR_TUR       (1 << 5)        /* Enable Tx FIFO Underrun Condition Interrupt */
#define SAIMR_RFS       (1 << 4)        /* Enable Rx FIFO Service Interrupt */
#define SAIMR_TFS       (1 << 3)        /* Enable Tx FIFO Service Interrupt */

/*
 * AC97 Controller registers
 */

#define POCR            __REG(0x40500000)  /* PCM Out Control Register */
#define POCR_FEIE       (1 << 3)        /* FIFO Error Interrupt Enable */
#define POCR_FSRIE      (1 << 1)        /* FIFO Service Request Interrupt Enable */

#define PICR            __REG(0x40500004)  /* PCM In Control Register */
#define PICR_FEIE       (1 << 3)        /* FIFO Error Interrupt Enable */
#define PICR_FSRIE      (1 << 1)        /* FIFO Service Request Interrupt Enable */

#define MCCR            __REG(0x40500008)  /* Mic In Control Register */
#define MCCR_FEIE       (1 << 3)        /* FIFO Error Interrupt Enable */
#define MCCR_FSRIE      (1 << 1)        /* FIFO Service Request Interrupt Enable */

#define GCR             __REG(0x4050000C)  /* Global Control Register */
#define GCR_nDMAEN      (1 << 24)       /* non DMA Enable */
#define GCR_CDONE_IE    (1 << 19)       /* Command Done Interrupt Enable */
#define GCR_SDONE_IE    (1 << 18)       /* Status Done Interrupt Enable */
#define GCR_SECRDY_IEN  (1 << 9)        /* Secondary Ready Interrupt Enable */
#define GCR_PRIRDY_IEN  (1 << 8)        /* Primary Ready Interrupt Enable */
#define GCR_SECRES_IEN  (1 << 5)        /* Secondary Resume Interrupt Enable */
#define GCR_PRIRES_IEN  (1 << 4)        /* Primary Resume Interrupt Enable */
#define GCR_ACLINK_OFF  (1 << 3)        /* AC-link Shut Off */
#define GCR_WARM_RST    (1 << 2)        /* AC97 Warm Reset */
#define GCR_COLD_RST    (1 << 1)        /* AC'97 Cold Reset (0 = active) */
#define GCR_GIE         (1 << 0)        /* Codec GPI Interrupt Enable */

#define POSR            __REG(0x40500010)  /* PCM Out Status Register */
#define POSR_FIFOE      (1 << 4)        /* FIFO error */
#define POSR_FSR        (1 << 2)        /* FIFO Service Request */

#define PISR            __REG(0x40500014)  /* PCM In Status Register */
#define PISR_FIFOE      (1 << 4)        /* FIFO error */
#define PISR_EOC        (1 << 3)        /* DMA End-of-Chain (exclusive clear) */
#define PISR_FSR        (1 << 2)        /* FIFO Service Request */

#define MCSR            __REG(0x40500018)  /* Mic In Status Register */
#define MCSR_FIFOE      (1 << 4)        /* FIFO error */
#define MCSR_EOC        (1 << 3)        /* DMA End-of-Chain (exclusive clear) */
#define MCSR_FSR        (1 << 2)        /* FIFO Service Request */

#define GSR             __REG(0x4050001C)  /* Global Status Register */
#define GSR_CDONE       (1 << 19)       /* Command Done */
#define GSR_SDONE       (1 << 18)       /* Status Done */
#define GSR_RDCS        (1 << 15)       /* Read Completion Status */
#define GSR_BIT3SLT12   (1 << 14)       /* Bit 3 of slot 12 */
#define GSR_BIT2SLT12   (1 << 13)       /* Bit 2 of slot 12 */
#define GSR_BIT1SLT12   (1 << 12)       /* Bit 1 of slot 12 */
#define GSR_SECRES      (1 << 11)       /* Secondary Resume Interrupt */
#define GSR_PRIRES      (1 << 10)       /* Primary Resume Interrupt */
#define GSR_SCR         (1 << 9)        /* Secondary Codec Ready */
#define GSR_PCR         (1 << 8)        /*  Primary Codec Ready */
#define GSR_MCINT       (1 << 7)        /* Mic In Interrupt */
#define GSR_POINT       (1 << 6)        /* PCM Out Interrupt */
#define GSR_PIINT       (1 << 5)        /* PCM In Interrupt */
#define GSR_ACOFFD      (1 << 3)        /* AC-link Shut Off Done */
#define GSR_MOINT       (1 << 2)        /* Modem Out Interrupt */
#define GSR_MIINT       (1 << 1)        /* Modem In Interrupt */
#define GSR_GSCI        (1 << 0)        /* Codec GPI Status Change Interrupt */

#define CAR             __REG(0x40500020)  /* CODEC Access Register */
#define CAR_CAIP        (1 << 0)        /* Codec Access In Progress */

#define PCDR            __REG(0x40500040)  /* PCM FIFO Data Register */
#define MCDR            __REG(0x40500060)  /* Mic-in FIFO Data Register */

#define MOCR            __REG(0x40500100)  /* Modem Out Control Register */
#define MOCR_FEIE       (1 << 3)        /* FIFO Error */
#define MOCR_FSRIE      (1 << 1)        /* FIFO Service Request Interrupt Enable */

#define MICR            __REG(0x40500108)  /* Modem In Control Register */
#define MICR_FEIE       (1 << 3)        /* FIFO Error */
#define MICR_FSRIE      (1 << 1)        /* FIFO Service Request Interrupt Enable */

#define MOSR            __REG(0x40500110)  /* Modem Out Status Register */
#define MOSR_FIFOE      (1 << 4)        /* FIFO error */
#define MOSR_FSR        (1 << 2)        /* FIFO Service Request */

#define MISR            __REG(0x40500118)  /* Modem In Status Register */
#define MISR_FIFOE      (1 << 4)        /* FIFO error */
#define MISR_EOC        (1 << 3)        /* DMA End-of-Chain (exclusive clear) */
#define MISR_FSR        (1 << 2)        /* FIFO Service Request */

#define MODR            __REG(0x40500140)  /* Modem FIFO Data Register */

#define PAC_REG_BASE    __REG(0x40500200)  /* Primary Audio Codec */
#define SAC_REG_BASE    __REG(0x40500300)  /* Secondary Audio Codec */
#define PMC_REG_BASE    __REG(0x40500400)  /* Primary Modem Codec */
#define SMC_REG_BASE    __REG(0x40500500)  /* Secondary Modem Codec */


/*
 * USB Device Controller
 * PXA25x and PXA27x USB device controller registers are different.
 */
#if defined(CONFIG_PXA25x)

#define UDC_RES1        __REG(0x40600004)  /* UDC Undocumented - Reserved1 */
#define UDC_RES2        __REG(0x40600008)  /* UDC Undocumented - Reserved2 */
#define UDC_RES3        __REG(0x4060000C)  /* UDC Undocumented - Reserved3 */

#define UDCCR           __REG(0x40600000)  /* UDC Control Register */
#define UDCCR_UDE       (1 << 0)        /* UDC enable */
#define UDCCR_UDA       (1 << 1)        /* UDC active */
#define UDCCR_RSM       (1 << 2)        /* Device resume */
#define UDCCR_RESIR     (1 << 3)        /* Resume interrupt request */
#define UDCCR_SUSIR     (1 << 4)        /* Suspend interrupt request */
#define UDCCR_SRM       (1 << 5)        /* Suspend/resume interrupt mask */
#define UDCCR_RSTIR     (1 << 6)        /* Reset interrupt request */
#define UDCCR_REM       (1 << 7)        /* Reset interrupt mask */

#define UDCCS0          __REG(0x40600010)  /* UDC Endpoint 0 Control/Status Register */
#define UDCCS0_OPR      (1 << 0)        /* OUT packet ready */
#define UDCCS0_IPR      (1 << 1)        /* IN packet ready */
#define UDCCS0_FTF      (1 << 2)        /* Flush Tx FIFO */
#define UDCCS0_DRWF     (1 << 3)        /* Device remote wakeup feature */
#define UDCCS0_SST      (1 << 4)        /* Sent stall */
#define UDCCS0_FST      (1 << 5)        /* Force stall */
#define UDCCS0_RNE      (1 << 6)        /* Receive FIFO no empty */
#define UDCCS0_SA       (1 << 7)        /* Setup active */

/* Bulk IN - Endpoint 1,6,11 */
#define UDCCS1          __REG(0x40600014)  /* UDC Endpoint 1 (IN) Control/Status Register */
#define UDCCS6          __REG(0x40600028)  /* UDC Endpoint 6 (IN) Control/Status Register */
#define UDCCS11         __REG(0x4060003C)  /* UDC Endpoint 11 (IN) Control/Status Register */

#define UDCCS_BI_TFS    (1 << 0)        /* Transmit FIFO service */
#define UDCCS_BI_TPC    (1 << 1)        /* Transmit packet complete */
#define UDCCS_BI_FTF    (1 << 2)        /* Flush Tx FIFO */
#define UDCCS_BI_TUR    (1 << 3)        /* Transmit FIFO underrun */
#define UDCCS_BI_SST    (1 << 4)        /* Sent stall */
#define UDCCS_BI_FST    (1 << 5)        /* Force stall */
#define UDCCS_BI_TSP    (1 << 7)        /* Transmit short packet */

/* Bulk OUT - Endpoint 2,7,12 */
#define UDCCS2          __REG(0x40600018)  /* UDC Endpoint 2 (OUT) Control/Status Register */
#define UDCCS7          __REG(0x4060002C)  /* UDC Endpoint 7 (OUT) Control/Status Register */
#define UDCCS12         __REG(0x40600040)  /* UDC Endpoint 12 (OUT) Control/Status Register */

#define UDCCS_BO_RFS    (1 << 0)        /* Receive FIFO service */
#define UDCCS_BO_RPC    (1 << 1)        /* Receive packet complete */
#define UDCCS_BO_DME    (1 << 3)        /* DMA enable */
#define UDCCS_BO_SST    (1 << 4)        /* Sent stall */
#define UDCCS_BO_FST    (1 << 5)        /* Force stall */
#define UDCCS_BO_RNE    (1 << 6)        /* Receive FIFO not empty */
#define UDCCS_BO_RSP    (1 << 7)        /* Receive short packet */

/* Isochronous IN - Endpoint 3,8,13 */
#define UDCCS3          __REG(0x4060001C)  /* UDC Endpoint 3 (IN) Control/Status Register */
#define UDCCS8          __REG(0x40600030)  /* UDC Endpoint 8 (IN) Control/Status Register */
#define UDCCS13         __REG(0x40600044)  /* UDC Endpoint 13 (IN) Control/Status Register */

#define UDCCS_II_TFS    (1 << 0)        /* Transmit FIFO service */
#define UDCCS_II_TPC    (1 << 1)        /* Transmit packet complete */
#define UDCCS_II_FTF    (1 << 2)        /* Flush Tx FIFO */
#define UDCCS_II_TUR    (1 << 3)        /* Transmit FIFO underrun */
#define UDCCS_II_TSP    (1 << 7)        /* Transmit short packet */

/* Isochronous OUT - Endpoint 4,9,14 */
#define UDCCS4          __REG(0x40600020)  /* UDC Endpoint 4 (OUT) Control/Status Register */
#define UDCCS9          __REG(0x40600034)  /* UDC Endpoint 9 (OUT) Control/Status Register */
#define UDCCS14         __REG(0x40600048)  /* UDC Endpoint 14 (OUT) Control/Status Register */

#define UDCCS_IO_RFS    (1 << 0)        /* Receive FIFO service */
#define UDCCS_IO_RPC    (1 << 1)        /* Receive packet complete */
#define UDCCS_IO_ROF    (1 << 2)        /* Receive overflow */
#define UDCCS_IO_DME    (1 << 3)        /* DMA enable */
#define UDCCS_IO_RNE    (1 << 6)        /* Receive FIFO not empty */
#define UDCCS_IO_RSP    (1 << 7)        /* Receive short packet */

/* Interrupt IN - Endpoint 5,10,15 */
#define UDCCS5          __REG(0x40600024)  /* UDC Endpoint 5 (Interrupt) Control/Status Register */
#define UDCCS10         __REG(0x40600038)  /* UDC Endpoint 10 (Interrupt) Control/Status Register */
#define UDCCS15         __REG(0x4060004C)  /* UDC Endpoint 15 (Interrupt) Control/Status Register */

#define UDCCS_INT_TFS   (1 << 0)        /* Transmit FIFO service */
#define UDCCS_INT_TPC   (1 << 1)        /* Transmit packet complete */
#define UDCCS_INT_FTF   (1 << 2)        /* Flush Tx FIFO */
#define UDCCS_INT_TUR   (1 << 3)        /* Transmit FIFO underrun */
#define UDCCS_INT_SST   (1 << 4)        /* Sent stall */
#define UDCCS_INT_FST   (1 << 5)        /* Force stall */
#define UDCCS_INT_TSP   (1 << 7)        /* Transmit short packet */

#define UFNRH           __REG(0x40600060)  /* UDC Frame Number Register High */
#define UFNRL           __REG(0x40600064)  /* UDC Frame Number Register Low */
#define UBCR2           __REG(0x40600068)  /* UDC Byte Count Reg 2 */
#define UBCR4           __REG(0x4060006c)  /* UDC Byte Count Reg 4 */
#define UBCR7           __REG(0x40600070)  /* UDC Byte Count Reg 7 */
#define UBCR9           __REG(0x40600074)  /* UDC Byte Count Reg 9 */
#define UBCR12          __REG(0x40600078)  /* UDC Byte Count Reg 12 */
#define UBCR14          __REG(0x4060007c)  /* UDC Byte Count Reg 14 */
#define UDDR0           __REG(0x40600080)  /* UDC Endpoint 0 Data Register */
#define UDDR1           __REG(0x40600100)  /* UDC Endpoint 1 Data Register */
#define UDDR2           __REG(0x40600180)  /* UDC Endpoint 2 Data Register */
#define UDDR3           __REG(0x40600200)  /* UDC Endpoint 3 Data Register */
#define UDDR4           __REG(0x40600400)  /* UDC Endpoint 4 Data Register */
#define UDDR5           __REG(0x406000A0)  /* UDC Endpoint 5 Data Register */
#define UDDR6           __REG(0x40600600)  /* UDC Endpoint 6 Data Register */
#define UDDR7           __REG(0x40600680)  /* UDC Endpoint 7 Data Register */
#define UDDR8           __REG(0x40600700)  /* UDC Endpoint 8 Data Register */
#define UDDR9           __REG(0x40600900)  /* UDC Endpoint 9 Data Register */
#define UDDR10          __REG(0x406000C0)  /* UDC Endpoint 10 Data Register */
#define UDDR11          __REG(0x40600B00)  /* UDC Endpoint 11 Data Register */
#define UDDR12          __REG(0x40600B80)  /* UDC Endpoint 12 Data Register */
#define UDDR13          __REG(0x40600C00)  /* UDC Endpoint 13 Data Register */
#define UDDR14          __REG(0x40600E00)  /* UDC Endpoint 14 Data Register */
#define UDDR15          __REG(0x406000E0)  /* UDC Endpoint 15 Data Register */

#define UICR0           __REG(0x40600050)  /* UDC Interrupt Control Register 0 */

#define UICR0_IM0       (1 << 0)        /* Interrupt mask ep 0 */
#define UICR0_IM1       (1 << 1)        /* Interrupt mask ep 1 */
#define UICR0_IM2       (1 << 2)        /* Interrupt mask ep 2 */
#define UICR0_IM3       (1 << 3)        /* Interrupt mask ep 3 */
#define UICR0_IM4       (1 << 4)        /* Interrupt mask ep 4 */
#define UICR0_IM5       (1 << 5)        /* Interrupt mask ep 5 */
#define UICR0_IM6       (1 << 6)        /* Interrupt mask ep 6 */
#define UICR0_IM7       (1 << 7)        /* Interrupt mask ep 7 */

#define UICR1           __REG(0x40600054)  /* UDC Interrupt Control Register 1 */

#define UICR1_IM8       (1 << 0)        /* Interrupt mask ep 8 */
#define UICR1_IM9       (1 << 1)        /* Interrupt mask ep 9 */
#define UICR1_IM10      (1 << 2)        /* Interrupt mask ep 10 */
#define UICR1_IM11      (1 << 3)        /* Interrupt mask ep 11 */
#define UICR1_IM12      (1 << 4)        /* Interrupt mask ep 12 */
#define UICR1_IM13      (1 << 5)        /* Interrupt mask ep 13 */
#define UICR1_IM14      (1 << 6)        /* Interrupt mask ep 14 */
#define UICR1_IM15      (1 << 7)        /* Interrupt mask ep 15 */

#define USIR0           __REG(0x40600058)  /* UDC Status Interrupt Register 0 */

#define USIR0_IR0       (1 << 0)        /* Interrupt request ep 0 */
#define USIR0_IR1       (1 << 1)        /* Interrupt request ep 1 */
#define USIR0_IR2       (1 << 2)        /* Interrupt request ep 2 */
#define USIR0_IR3       (1 << 3)        /* Interrupt request ep 3 */
#define USIR0_IR4       (1 << 4)        /* Interrupt request ep 4 */
#define USIR0_IR5       (1 << 5)        /* Interrupt request ep 5 */
#define USIR0_IR6       (1 << 6)        /* Interrupt request ep 6 */
#define USIR0_IR7       (1 << 7)        /* Interrupt request ep 7 */

#define USIR1           __REG(0x4060005C)  /* UDC Status Interrupt Register 1 */

#define USIR1_IR8       (1 << 0)        /* Interrupt request ep 8 */
#define USIR1_IR9       (1 << 1)        /* Interrupt request ep 9 */
#define USIR1_IR10      (1 << 2)        /* Interrupt request ep 10 */
#define USIR1_IR11      (1 << 3)        /* Interrupt request ep 11 */
#define USIR1_IR12      (1 << 4)        /* Interrupt request ep 12 */
#define USIR1_IR13      (1 << 5)        /* Interrupt request ep 13 */
#define USIR1_IR14      (1 << 6)        /* Interrupt request ep 14 */
#define USIR1_IR15      (1 << 7)        /* Interrupt request ep 15 */

#elif defined(CONFIG_PXA27x)

#define UDCCR           __REG(0x40600000) /* UDC Control Register */
#define UDCCR_OEN       (1 << 31)       /* On-the-Go Enable */
#define UDCCR_AALTHNP   (1 << 30)       /* A-device Alternate Host Negotiation
                                           Protocol Port Support */
#define UDCCR_AHNP      (1 << 29)       /* A-device Host Negotiation Protocol
                                           Support */
#define UDCCR_BHNP      (1 << 28)       /* B-device Host Negotiation Protocol
                                           Enable */
#define UDCCR_DWRE      (1 << 16)       /* Device Remote Wake-up Enable */
#define UDCCR_ACN       (0x03 << 11)    /* Active UDC configuration Number */
#define UDCCR_ACN_S     11
#define UDCCR_AIN       (0x07 << 8)     /* Active UDC interface Number */
#define UDCCR_AIN_S     8
#define UDCCR_AAISN     (0x07 << 5)     /* Active UDC Alternate Interface
                                           Setting Number */
#define UDCCR_AAISN_S   5
#define UDCCR_SMAC      (1 << 4)        /* Switch Endpoint Memory to Active
                                           Configuration */
#define UDCCR_EMCE      (1 << 3)        /* Endpoint Memory Configuration
                                           Error */
#define UDCCR_UDR       (1 << 2)        /* UDC Resume */
#define UDCCR_UDA       (1 << 1)        /* UDC Active */
#define UDCCR_UDE       (1 << 0)        /* UDC Enable */

#define UDCICR0         __REG(0x40600004) /* UDC Interrupt Control Register0 */
#define UDCICR1         __REG(0x40600008) /* UDC Interrupt Control Register1 */
#define UDCICR_FIFOERR  (1 << 1)        /* FIFO Error interrupt for EP */
#define UDCICR_PKTCOMPL (1 << 0)        /* Packet Complete interrupt for EP */

#define UDC_INT_FIFOERROR  (0x2)
#define UDC_INT_PACKETCMP  (0x1)

#define UDCICR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
#define UDCICR1_IECC    (1 << 31)       /* IntEn - Configuration Change */
#define UDCICR1_IESOF   (1 << 30)       /* IntEn - Start of Frame */
#define UDCICR1_IERU    (1 << 29)       /* IntEn - Resume */
#define UDCICR1_IESU    (1 << 28)       /* IntEn - Suspend */
#define UDCICR1_IERS    (1 << 27)       /* IntEn - Reset */

#define UDCISR0         __REG(0x4060000C) /* UDC Interrupt Status Register 0 */
#define UDCISR1         __REG(0x40600010) /* UDC Interrupt Status Register 1 */
#define UDCISR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
#define UDCISR1_IRCC    (1 << 31)       /* IntReq - Configuration Change */
#define UDCISR1_IRSOF   (1 << 30)       /* IntReq - Start of Frame */
#define UDCISR1_IRRU    (1 << 29)       /* IntReq - Resume */
#define UDCISR1_IRSU    (1 << 28)       /* IntReq - Suspend */
#define UDCISR1_IRRS    (1 << 27)       /* IntReq - Reset */

#define UDCFNR          __REG(0x40600014) /* UDC Frame Number Register */
#define UDCOTGICR       __REG(0x40600018) /* UDC On-The-Go interrupt control */
#define UDCOTGICR_IESF  (1 << 24)       /* OTG SET_FEATURE command recvd */
#define UDCOTGICR_IEXR  (1 << 17)       /* Extra Transciever Interrupt
                                           Rising Edge Interrupt Enable */
#define UDCOTGICR_IEXF  (1 << 16)       /* Extra Transciever Interrupt
                                           Falling Edge Interrupt Enable */
#define UDCOTGICR_IEVV40R (1 << 9)      /* OTG Vbus Valid 4.0V Rising Edge
                                           Interrupt Enable */
#define UDCOTGICR_IEVV40F (1 << 8)      /* OTG Vbus Valid 4.0V Falling Edge
                                           Interrupt Enable */
#define UDCOTGICR_IEVV44R (1 << 7)      /* OTG Vbus Valid 4.4V Rising Edge
                                           Interrupt Enable */
#define UDCOTGICR_IEVV44F (1 << 6)      /* OTG Vbus Valid 4.4V Falling Edge
                                           Interrupt Enable */
#define UDCOTGICR_IESVR (1 << 5)        /* OTG Session Valid Rising Edge
                                           Interrupt Enable */
#define UDCOTGICR_IESVF (1 << 4)        /* OTG Session Valid Falling Edge
                                           Interrupt Enable */
#define UDCOTGICR_IESDR (1 << 3)        /* OTG A-Device SRP Detect Rising
                                           Edge Interrupt Enable */
#define UDCOTGICR_IESDF (1 << 2)        /* OTG A-Device SRP Detect Falling
                                           Edge Interrupt Enable */
#define UDCOTGICR_IEIDR (1 << 1)        /* OTG ID Change Rising Edge
                                           Interrupt Enable */
#define UDCOTGICR_IEIDF (1 << 0)        /* OTG ID Change Falling Edge
                                           Interrupt Enable */

#define UP2OCR            __REG(0x40600020)  /* USB Port 2 Output Control register */

#define UP2OCR_CPVEN    (1 << 0)        /* Charge Pump Vbus Enable */
#define UP2OCR_CPVPE    (1 << 1)        /* Charge Pump Vbus Pulse Enable */
#define UP2OCR_DPPDE    (1 << 2)        /* Host Port 2 Transceiver D+ Pull Down Enable */
#define UP2OCR_DMPDE    (1 << 3)        /* Host Port 2 Transceiver D- Pull Down Enable */
#define UP2OCR_DPPUE    (1 << 4)        /* Host Port 2 Transceiver D+ Pull Up Enable */
#define UP2OCR_DMPUE    (1 << 5)        /* Host Port 2 Transceiver D- Pull Up Enable */
#define UP2OCR_DPPUBE   (1 << 6)        /* Host Port 2 Transceiver D+ Pull Up Bypass Enable */
#define UP2OCR_DMPUBE   (1 << 7)        /* Host Port 2 Transceiver D- Pull Up Bypass Enable */
#define UP2OCR_EXSP             (1 << 8)        /* External Transceiver Speed Control */
#define UP2OCR_EXSUS    (1 << 9)        /* External Transceiver Speed Enable */
#define UP2OCR_IDON             (1 << 10)       /* OTG ID Read Enable */
#define UP2OCR_HXS              (1 << 16)       /* Host Port 2 Transceiver Output Select */
#define UP2OCR_HXOE             (1 << 17)       /* Host Port 2 Transceiver Output Enable */
#define UP2OCR_SEOS             (1 << 24)       /* Single-Ended Output Select */

#define UDCCSN(x)       __REG2(0x40600100, (x) << 2)
#define UDCCSR0         __REG(0x40600100) /* UDC Control/Status register - Endpoint 0 */
#define UDCCSR0_SA      (1 << 7)        /* Setup Active */
#define UDCCSR0_RNE     (1 << 6)        /* Receive FIFO Not Empty */
#define UDCCSR0_FST     (1 << 5)        /* Force Stall */
#define UDCCSR0_SST     (1 << 4)        /* Sent Stall */
#define UDCCSR0_DME     (1 << 3)        /* DMA Enable */
#define UDCCSR0_FTF     (1 << 2)        /* Flush Transmit FIFO */
#define UDCCSR0_IPR     (1 << 1)        /* IN Packet Ready */
#define UDCCSR0_OPC     (1 << 0)        /* OUT Packet Complete */

#define UDCCSRA         __REG(0x40600104) /* UDC Control/Status register - Endpoint A */
#define UDCCSRB         __REG(0x40600108) /* UDC Control/Status register - Endpoint B */
#define UDCCSRC         __REG(0x4060010C) /* UDC Control/Status register - Endpoint C */
#define UDCCSRD         __REG(0x40600110) /* UDC Control/Status register - Endpoint D */
#define UDCCSRE         __REG(0x40600114) /* UDC Control/Status register - Endpoint E */
#define UDCCSRF         __REG(0x40600118) /* UDC Control/Status register - Endpoint F */
#define UDCCSRG         __REG(0x4060011C) /* UDC Control/Status register - Endpoint G */
#define UDCCSRH         __REG(0x40600120) /* UDC Control/Status register - Endpoint H */
#define UDCCSRI         __REG(0x40600124) /* UDC Control/Status register - Endpoint I */
#define UDCCSRJ         __REG(0x40600128) /* UDC Control/Status register - Endpoint J */
#define UDCCSRK         __REG(0x4060012C) /* UDC Control/Status register - Endpoint K */
#define UDCCSRL         __REG(0x40600130) /* UDC Control/Status register - Endpoint L */
#define UDCCSRM         __REG(0x40600134) /* UDC Control/Status register - Endpoint M */
#define UDCCSRN         __REG(0x40600138) /* UDC Control/Status register - Endpoint N */
#define UDCCSRP         __REG(0x4060013C) /* UDC Control/Status register - Endpoint P */
#define UDCCSRQ         __REG(0x40600140) /* UDC Control/Status register - Endpoint Q */
#define UDCCSRR         __REG(0x40600144) /* UDC Control/Status register - Endpoint R */
#define UDCCSRS         __REG(0x40600148) /* UDC Control/Status register - Endpoint S */
#define UDCCSRT         __REG(0x4060014C) /* UDC Control/Status register - Endpoint T */
#define UDCCSRU         __REG(0x40600150) /* UDC Control/Status register - Endpoint U */
#define UDCCSRV         __REG(0x40600154) /* UDC Control/Status register - Endpoint V */
#define UDCCSRW         __REG(0x40600158) /* UDC Control/Status register - Endpoint W */
#define UDCCSRX         __REG(0x4060015C) /* UDC Control/Status register - Endpoint X */

#define UDCCSR_DPE      (1 << 9)        /* Data Packet Error */
#define UDCCSR_FEF      (1 << 8)        /* Flush Endpoint FIFO */
#define UDCCSR_SP       (1 << 7)        /* Short Packet Control/Status */
#define UDCCSR_BNE      (1 << 6)        /* Buffer Not Empty (IN endpoints) */
#define UDCCSR_BNF      (1 << 6)        /* Buffer Not Full (OUT endpoints) */
#define UDCCSR_FST      (1 << 5)        /* Force STALL */
#define UDCCSR_SST      (1 << 4)        /* Sent STALL */
#define UDCCSR_DME      (1 << 3)        /* DMA Enable */
#define UDCCSR_TRN      (1 << 2)        /* Tx/Rx NAK */
#define UDCCSR_PC       (1 << 1)        /* Packet Complete */
#define UDCCSR_FS       (1 << 0)        /* FIFO needs service */

#define UDCBCN(x)       __REG2(0x40600200, (x)<<2)
#define UDCBCR0         __REG(0x40600200) /* Byte Count Register - EP0 */
#define UDCBCRA         __REG(0x40600204) /* Byte Count Register - EPA */
#define UDCBCRB         __REG(0x40600208) /* Byte Count Register - EPB */
#define UDCBCRC         __REG(0x4060020C) /* Byte Count Register - EPC */
#define UDCBCRD         __REG(0x40600210) /* Byte Count Register - EPD */
#define UDCBCRE         __REG(0x40600214) /* Byte Count Register - EPE */
#define UDCBCRF         __REG(0x40600218) /* Byte Count Register - EPF */
#define UDCBCRG         __REG(0x4060021C) /* Byte Count Register - EPG */
#define UDCBCRH         __REG(0x40600220) /* Byte Count Register - EPH */
#define UDCBCRI         __REG(0x40600224) /* Byte Count Register - EPI */
#define UDCBCRJ         __REG(0x40600228) /* Byte Count Register - EPJ */
#define UDCBCRK         __REG(0x4060022C) /* Byte Count Register - EPK */
#define UDCBCRL         __REG(0x40600230) /* Byte Count Register - EPL */
#define UDCBCRM         __REG(0x40600234) /* Byte Count Register - EPM */
#define UDCBCRN         __REG(0x40600238) /* Byte Count Register - EPN */
#define UDCBCRP         __REG(0x4060023C) /* Byte Count Register - EPP */
#define UDCBCRQ         __REG(0x40600240) /* Byte Count Register - EPQ */
#define UDCBCRR         __REG(0x40600244) /* Byte Count Register - EPR */
#define UDCBCRS         __REG(0x40600248) /* Byte Count Register - EPS */
#define UDCBCRT         __REG(0x4060024C) /* Byte Count Register - EPT */
#define UDCBCRU         __REG(0x40600250) /* Byte Count Register - EPU */
#define UDCBCRV         __REG(0x40600254) /* Byte Count Register - EPV */
#define UDCBCRW         __REG(0x40600258) /* Byte Count Register - EPW */
#define UDCBCRX         __REG(0x4060025C) /* Byte Count Register - EPX */

#define UDCDN(x)        __REG2(0x40600300, (x)<<2)
#define PHYS_UDCDN(x)   (0x40600300 + ((x)<<2))
#define PUDCDN(x)       (volatile u32 *)(io_p2v(PHYS_UDCDN((x))))
#define UDCDR0          __REG(0x40600300) /* Data Register - EP0 */
#define UDCDRA          __REG(0x40600304) /* Data Register - EPA */
#define UDCDRB          __REG(0x40600308) /* Data Register - EPB */
#define UDCDRC          __REG(0x4060030C) /* Data Register - EPC */
#define UDCDRD          __REG(0x40600310) /* Data Register - EPD */
#define UDCDRE          __REG(0x40600314) /* Data Register - EPE */
#define UDCDRF          __REG(0x40600318) /* Data Register - EPF */
#define UDCDRG          __REG(0x4060031C) /* Data Register - EPG */
#define UDCDRH          __REG(0x40600320) /* Data Register - EPH */
#define UDCDRI          __REG(0x40600324) /* Data Register - EPI */
#define UDCDRJ          __REG(0x40600328) /* Data Register - EPJ */
#define UDCDRK          __REG(0x4060032C) /* Data Register - EPK */
#define UDCDRL          __REG(0x40600330) /* Data Register - EPL */
#define UDCDRM          __REG(0x40600334) /* Data Register - EPM */
#define UDCDRN          __REG(0x40600338) /* Data Register - EPN */
#define UDCDRP          __REG(0x4060033C) /* Data Register - EPP */
#define UDCDRQ          __REG(0x40600340) /* Data Register - EPQ */
#define UDCDRR          __REG(0x40600344) /* Data Register - EPR */
#define UDCDRS          __REG(0x40600348) /* Data Register - EPS */
#define UDCDRT          __REG(0x4060034C) /* Data Register - EPT */
#define UDCDRU          __REG(0x40600350) /* Data Register - EPU */
#define UDCDRV          __REG(0x40600354) /* Data Register - EPV */
#define UDCDRW          __REG(0x40600358) /* Data Register - EPW */
#define UDCDRX          __REG(0x4060035C) /* Data Register - EPX */

#define UDCCN(x)       __REG2(0x40600400, (x)<<2)
#define UDCCRA          __REG(0x40600404) /* Configuration register EPA */
#define UDCCRB          __REG(0x40600408) /* Configuration register EPB */
#define UDCCRC          __REG(0x4060040C) /* Configuration register EPC */
#define UDCCRD          __REG(0x40600410) /* Configuration register EPD */
#define UDCCRE          __REG(0x40600414) /* Configuration register EPE */
#define UDCCRF          __REG(0x40600418) /* Configuration register EPF */
#define UDCCRG          __REG(0x4060041C) /* Configuration register EPG */
#define UDCCRH          __REG(0x40600420) /* Configuration register EPH */
#define UDCCRI          __REG(0x40600424) /* Configuration register EPI */
#define UDCCRJ          __REG(0x40600428) /* Configuration register EPJ */
#define UDCCRK          __REG(0x4060042C) /* Configuration register EPK */
#define UDCCRL          __REG(0x40600430) /* Configuration register EPL */
#define UDCCRM          __REG(0x40600434) /* Configuration register EPM */
#define UDCCRN          __REG(0x40600438) /* Configuration register EPN */
#define UDCCRP          __REG(0x4060043C) /* Configuration register EPP */
#define UDCCRQ          __REG(0x40600440) /* Configuration register EPQ */
#define UDCCRR          __REG(0x40600444) /* Configuration register EPR */
#define UDCCRS          __REG(0x40600448) /* Configuration register EPS */
#define UDCCRT          __REG(0x4060044C) /* Configuration register EPT */
#define UDCCRU          __REG(0x40600450) /* Configuration register EPU */
#define UDCCRV          __REG(0x40600454) /* Configuration register EPV */
#define UDCCRW          __REG(0x40600458) /* Configuration register EPW */
#define UDCCRX          __REG(0x4060045C) /* Configuration register EPX */

#define UDCCONR_CN      (0x03 << 25)    /* Configuration Number */
#define UDCCONR_CN_S    (25)
#define UDCCONR_IN      (0x07 << 22)    /* Interface Number */
#define UDCCONR_IN_S    (22)
#define UDCCONR_AISN    (0x07 << 19)    /* Alternate Interface Number */
#define UDCCONR_AISN_S  (19)
#define UDCCONR_EN      (0x0f << 15)    /* Endpoint Number */
#define UDCCONR_EN_S    (15)
#define UDCCONR_ET      (0x03 << 13)    /* Endpoint Type: */
#define UDCCONR_ET_S    (13)
#define UDCCONR_ET_INT  (0x03 << 13)    /*   Interrupt */
#define UDCCONR_ET_BULK (0x02 << 13)    /*   Bulk */
#define UDCCONR_ET_ISO  (0x01 << 13)    /*   Isochronous */
#define UDCCONR_ET_NU   (0x00 << 13)    /*   Not used */
#define UDCCONR_ED      (1 << 12)       /* Endpoint Direction */
#define UDCCONR_MPS     (0x3ff << 2)    /* Maximum Packet Size */
#define UDCCONR_MPS_S   (2)
#define UDCCONR_DE      (1 << 1)        /* Double Buffering Enable */
#define UDCCONR_EE      (1 << 0)        /* Endpoint Enable */


#define UDC_INT_FIFOERROR  (0x2)
#define UDC_INT_PACKETCMP  (0x1)

#define UDC_FNR_MASK     (0x7ff)

#define UDCCSR_WR_MASK   (UDCCSR_DME|UDCCSR_FST)
#define UDC_BCR_MASK    (0x3ff)
#endif

/*
 * Fast Infrared Communication Port
 */

#define FICP            __REG(0x40800000)  /* Start of FICP area */
#define ICCR0           __REG(0x40800000)  /* ICP Control Register 0 */
#define ICCR1           __REG(0x40800004)  /* ICP Control Register 1 */
#define ICCR2           __REG(0x40800008)  /* ICP Control Register 2 */
#define ICDR            __REG(0x4080000c)  /* ICP Data Register */
#define ICSR0           __REG(0x40800014)  /* ICP Status Register 0 */
#define ICSR1           __REG(0x40800018)  /* ICP Status Register 1 */

#define ICCR0_AME       (1 << 7)        /* Address match enable */
#define ICCR0_TIE       (1 << 6)        /* Transmit FIFO interrupt enable */
#define ICCR0_RIE       (1 << 5)        /* Recieve FIFO interrupt enable */
#define ICCR0_RXE       (1 << 4)        /* Receive enable */
#define ICCR0_TXE       (1 << 3)        /* Transmit enable */
#define ICCR0_TUS       (1 << 2)        /* Transmit FIFO underrun select */
#define ICCR0_LBM       (1 << 1)        /* Loopback mode */
#define ICCR0_ITR       (1 << 0)        /* IrDA transmission */

#define ICCR2_RXP       (1 << 3)        /* Receive Pin Polarity select */
#define ICCR2_TXP       (1 << 2)        /* Transmit Pin Polarity select */
#define ICCR2_TRIG      (3 << 0)        /* Receive FIFO Trigger threshold */
#define ICCR2_TRIG_8    (0 << 0)        /*      >= 8 bytes */
#define ICCR2_TRIG_16   (1 << 0)        /*      >= 16 bytes */
#define ICCR2_TRIG_32   (2 << 0)        /*      >= 32 bytes */

#ifdef CONFIG_PXA27x
#define ICSR0_EOC       (1 << 6)        /* DMA End of Descriptor Chain */
#endif
#define ICSR0_FRE       (1 << 5)        /* Framing error */
#define ICSR0_RFS       (1 << 4)        /* Receive FIFO service request */
#define ICSR0_TFS       (1 << 3)        /* Transnit FIFO service request */
#define ICSR0_RAB       (1 << 2)        /* Receiver abort */
#define ICSR0_TUR       (1 << 1)        /* Trunsmit FIFO underun */
#define ICSR0_EIF       (1 << 0)        /* End/Error in FIFO */

#define ICSR1_ROR       (1 << 6)        /* Receiver FIFO underrun  */
#define ICSR1_CRE       (1 << 5)        /* CRC error */
#define ICSR1_EOF       (1 << 4)        /* End of frame */
#define ICSR1_TNF       (1 << 3)        /* Transmit FIFO not full */
#define ICSR1_RNE       (1 << 2)        /* Receive FIFO not empty */
#define ICSR1_TBY       (1 << 1)        /* Tramsmiter busy flag */
#define ICSR1_RSY       (1 << 0)        /* Recevier synchronized flag */


/*
 * Real Time Clock
 */

#define RCNR            __REG(0x40900000)  /* RTC Count Register */
#define RTAR            __REG(0x40900004)  /* RTC Alarm Register */
#define RTSR            __REG(0x40900008)  /* RTC Status Register */
#define RTTR            __REG(0x4090000C)  /* RTC Timer Trim Register */
#define PIAR            __REG(0x40900038)  /* Periodic Interrupt Alarm Register */

#define RTSR_PICE       (1 << 15)       /* Periodic interrupt count enable */
#define RTSR_PIALE      (1 << 14)       /* Periodic interrupt Alarm enable */
#define RTSR_HZE        (1 << 3)        /* HZ interrupt enable */
#define RTSR_ALE        (1 << 2)        /* RTC alarm interrupt enable */
#define RTSR_HZ         (1 << 1)        /* HZ rising-edge detected */
#define RTSR_AL         (1 << 0)        /* RTC alarm detected */


/*
 * OS Timer & Match Registers
 */

#define OSMR0           __REG(0x40A00000)  /* */
#define OSMR1           __REG(0x40A00004)  /* */
#define OSMR2           __REG(0x40A00008)  /* */
#define OSMR3           __REG(0x40A0000C)  /* */
#define OSMR4           __REG(0x40A00080)  /* */
#define OSCR            __REG(0x40A00010)  /* OS Timer Counter Register */
#define OSCR4           __REG(0x40A00040)  /* OS Timer Counter Register */
#define OMCR4           __REG(0x40A000C0)  /* */
#define OSSR            __REG(0x40A00014)  /* OS Timer Status Register */
#define OWER            __REG(0x40A00018)  /* OS Timer Watchdog Enable Register */
#define OIER            __REG(0x40A0001C)  /* OS Timer Interrupt Enable Register */

#define OSSR_M3         (1 << 3)        /* Match status channel 3 */
#define OSSR_M2         (1 << 2)        /* Match status channel 2 */
#define OSSR_M1         (1 << 1)        /* Match status channel 1 */
#define OSSR_M0         (1 << 0)        /* Match status channel 0 */

#define OWER_WME        (1 << 0)        /* Watchdog Match Enable */

#define OIER_E3         (1 << 3)        /* Interrupt enable channel 3 */
#define OIER_E2         (1 << 2)        /* Interrupt enable channel 2 */
#define OIER_E1         (1 << 1)        /* Interrupt enable channel 1 */
#define OIER_E0         (1 << 0)        /* Interrupt enable channel 0 */


/*
 * Pulse Width Modulator
 */

#define PWM_CTRL0       __REG(0x40B00000)  /* PWM 0 Control Register */
#define PWM_PWDUTY0     __REG(0x40B00004)  /* PWM 0 Duty Cycle Register */
#define PWM_PERVAL0     __REG(0x40B00008)  /* PWM 0 Period Control Register */

#define PWM_CTRL1       __REG(0x40C00000)  /* PWM 1Control Register */
#define PWM_PWDUTY1     __REG(0x40C00004)  /* PWM 1 Duty Cycle Register */
#define PWM_PERVAL1     __REG(0x40C00008)  /* PWM 1 Period Control Register */


/*
 * Interrupt Controller
 */

#define ICIP            __REG(0x40D00000)  /* Interrupt Controller IRQ Pending Register */
#define ICMR            __REG(0x40D00004)  /* Interrupt Controller Mask Register */
#define ICLR            __REG(0x40D00008)  /* Interrupt Controller Level Register */
#define ICFP            __REG(0x40D0000C)  /* Interrupt Controller FIQ Pending Register */
#define ICPR            __REG(0x40D00010)  /* Interrupt Controller Pending Register */
#define ICCR            __REG(0x40D00014)  /* Interrupt Controller Control Register */


/*
 * General Purpose I/O
 */

#define GPIO0_BASE      ((void __iomem *)io_p2v(0x40E00000))
#define GPIO1_BASE      ((void __iomem *)io_p2v(0x40E00004))
#define GPIO2_BASE      ((void __iomem *)io_p2v(0x40E00008))
#define GPIO3_BASE      ((void __iomem *)io_p2v(0x40E00100))

#define GPLR_OFFSET     0x00
#define GPDR_OFFSET     0x0C
#define GPSR_OFFSET     0x18
#define GPCR_OFFSET     0x24
#define GRER_OFFSET     0x30
#define GFER_OFFSET     0x3C
#define GEDR_OFFSET     0x48

#define GPLR0           __REG(0x40E00000)  /* GPIO Pin-Level Register GPIO<31:0> */
#define GPLR1           __REG(0x40E00004)  /* GPIO Pin-Level Register GPIO<63:32> */
#define GPLR2           __REG(0x40E00008)  /* GPIO Pin-Level Register GPIO<80:64> */

#define GPDR0           __REG(0x40E0000C)  /* GPIO Pin Direction Register GPIO<31:0> */
#define GPDR1           __REG(0x40E00010)  /* GPIO Pin Direction Register GPIO<63:32> */
#define GPDR2           __REG(0x40E00014)  /* GPIO Pin Direction Register GPIO<80:64> */

#define GPSR0           __REG(0x40E00018)  /* GPIO Pin Output Set Register GPIO<31:0> */
#define GPSR1           __REG(0x40E0001C)  /* GPIO Pin Output Set Register GPIO<63:32> */
#define GPSR2           __REG(0x40E00020)  /* GPIO Pin Output Set Register GPIO<80:64> */

#define GPCR0           __REG(0x40E00024)  /* GPIO Pin Output Clear Register GPIO<31:0> */
#define GPCR1           __REG(0x40E00028)  /* GPIO Pin Output Clear Register GPIO <63:32> */
#define GPCR2           __REG(0x40E0002C)  /* GPIO Pin Output Clear Register GPIO <80:64> */

#define GRER0           __REG(0x40E00030)  /* GPIO Rising-Edge Detect Register GPIO<31:0> */
#define GRER1           __REG(0x40E00034)  /* GPIO Rising-Edge Detect Register GPIO<63:32> */
#define GRER2           __REG(0x40E00038)  /* GPIO Rising-Edge Detect Register GPIO<80:64> */

#define GFER0           __REG(0x40E0003C)  /* GPIO Falling-Edge Detect Register GPIO<31:0> */
#define GFER1           __REG(0x40E00040)  /* GPIO Falling-Edge Detect Register GPIO<63:32> */
#define GFER2           __REG(0x40E00044)  /* GPIO Falling-Edge Detect Register GPIO<80:64> */

#define GEDR0           __REG(0x40E00048)  /* GPIO Edge Detect Status Register GPIO<31:0> */
#define GEDR1           __REG(0x40E0004C)  /* GPIO Edge Detect Status Register GPIO<63:32> */
#define GEDR2           __REG(0x40E00050)  /* GPIO Edge Detect Status Register GPIO<80:64> */

#define GAFR0_L         __REG(0x40E00054)  /* GPIO Alternate Function Select Register GPIO<15:0> */
#define GAFR0_U         __REG(0x40E00058)  /* GPIO Alternate Function Select Register GPIO<31:16> */
#define GAFR1_L         __REG(0x40E0005C)  /* GPIO Alternate Function Select Register GPIO<47:32> */
#define GAFR1_U         __REG(0x40E00060)  /* GPIO Alternate Function Select Register GPIO<63:48> */
#define GAFR2_L         __REG(0x40E00064)  /* GPIO Alternate Function Select Register GPIO<79:64> */
#define GAFR2_U         __REG(0x40E00068)  /* GPIO Alternate Function Select Register GPIO<95-80> */
#define GAFR3_L         __REG(0x40E0006C)  /* GPIO Alternate Function Select Register GPIO<111:96> */
#define GAFR3_U         __REG(0x40E00070)  /* GPIO Alternate Function Select Register GPIO<127:112> */

#define GPLR3           __REG(0x40E00100)  /* GPIO Pin-Level Register GPIO<127:96> */
#define GPDR3           __REG(0x40E0010C)  /* GPIO Pin Direction Register GPIO<127:96> */
#define GPSR3           __REG(0x40E00118)  /* GPIO Pin Output Set Register GPIO<127:96> */
#define GPCR3           __REG(0x40E00124)  /* GPIO Pin Output Clear Register GPIO<127:96> */
#define GRER3           __REG(0x40E00130)  /* GPIO Rising-Edge Detect Register GPIO<127:96> */
#define GFER3           __REG(0x40E0013C)  /* GPIO Falling-Edge Detect Register GPIO<127:96> */
#define GEDR3           __REG(0x40E00148)  /* GPIO Edge Detect Status Register GPIO<127:96> */

/* More handy macros.  The argument is a literal GPIO number. */

#define GPIO_bit(x)     (1 << ((x) & 0x1f))

#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)

/* Interrupt Controller */

#define ICIP2           __REG(0x40D0009C)  /* Interrupt Controller IRQ Pending Register 2 */
#define ICMR2           __REG(0x40D000A0)  /* Interrupt Controller Mask Register 2 */
#define ICLR2           __REG(0x40D000A4)  /* Interrupt Controller Level Register 2 */
#define ICFP2           __REG(0x40D000A8)  /* Interrupt Controller FIQ Pending Register 2 */
#define ICPR2           __REG(0x40D000AC)  /* Interrupt Controller Pending Register 2 */

#define _GPLR(x)        __REG2(0x40E00000, ((x) & 0x60) >> 3)
#define _GPDR(x)        __REG2(0x40E0000C, ((x) & 0x60) >> 3)
#define _GPSR(x)        __REG2(0x40E00018, ((x) & 0x60) >> 3)
#define _GPCR(x)        __REG2(0x40E00024, ((x) & 0x60) >> 3)
#define _GRER(x)        __REG2(0x40E00030, ((x) & 0x60) >> 3)
#define _GFER(x)        __REG2(0x40E0003C, ((x) & 0x60) >> 3)
#define _GEDR(x)        __REG2(0x40E00048, ((x) & 0x60) >> 3)
#define _GAFR(x)        __REG2(0x40E00054, ((x) & 0x70) >> 2)

#define GPLR(x)         (*((((x) & 0x7f) < 96) ? &_GPLR(x) : &GPLR3))
#define GPDR(x)         (*((((x) & 0x7f) < 96) ? &_GPDR(x) : &GPDR3))
#define GPSR(x)         (*((((x) & 0x7f) < 96) ? &_GPSR(x) : &GPSR3))
#define GPCR(x)         (*((((x) & 0x7f) < 96) ? &_GPCR(x) : &GPCR3))
#define GRER(x)         (*((((x) & 0x7f) < 96) ? &_GRER(x) : &GRER3))
#define GFER(x)         (*((((x) & 0x7f) < 96) ? &_GFER(x) : &GFER3))
#define GEDR(x)         (*((((x) & 0x7f) < 96) ? &_GEDR(x) : &GEDR3))
#define GAFR(x)         (*((((x) & 0x7f) < 96) ? &_GAFR(x) : \
                         ((((x) & 0x7f) < 112) ? &GAFR3_L : &GAFR3_U)))
#else

#define GPLR(x)         __REG2(0x40E00000, ((x) & 0x60) >> 3)
#define GPDR(x)         __REG2(0x40E0000C, ((x) & 0x60) >> 3)
#define GPSR(x)         __REG2(0x40E00018, ((x) & 0x60) >> 3)
#define GPCR(x)         __REG2(0x40E00024, ((x) & 0x60) >> 3)
#define GRER(x)         __REG2(0x40E00030, ((x) & 0x60) >> 3)
#define GFER(x)         __REG2(0x40E0003C, ((x) & 0x60) >> 3)
#define GEDR(x)         __REG2(0x40E00048, ((x) & 0x60) >> 3)
#define GAFR(x)         __REG2(0x40E00054, ((x) & 0x70) >> 2)

#endif


/* GPIO alternate function assignments */

#define GPIO1_RST               1       /* reset */
#define GPIO6_MMCCLK            6       /* MMC Clock */
#define GPIO7_48MHz             7       /* 48 MHz clock output */
#define GPIO8_MMCCS0            8       /* MMC Chip Select 0 */
#define GPIO9_MMCCS1            9       /* MMC Chip Select 1 */
#define GPIO10_RTCCLK           10      /* real time clock (1 Hz) */
#define GPIO11_3_6MHz           11      /* 3.6 MHz oscillator out */
#define GPIO12_32KHz            12      /* 32 kHz out */
#define GPIO13_MBGNT            13      /* memory controller grant */
#define GPIO14_MBREQ            14      /* alternate bus master request */
#define GPIO15_nCS_1            15      /* chip select 1 */
#define GPIO16_PWM0             16      /* PWM0 output */
#define GPIO17_PWM1             17      /* PWM1 output */
#define GPIO18_RDY              18      /* Ext. Bus Ready */
#define GPIO19_DREQ1            19      /* External DMA Request */
#define GPIO20_DREQ0            20      /* External DMA Request */
#define GPIO23_SCLK             23      /* SSP clock */
#define GPIO24_SFRM             24      /* SSP Frame */
#define GPIO25_STXD             25      /* SSP transmit */
#define GPIO26_SRXD             26      /* SSP receive */
#define GPIO27_SEXTCLK          27      /* SSP ext_clk */
#define GPIO28_BITCLK           28      /* AC97/I2S bit_clk */
#define GPIO29_SDATA_IN         29      /* AC97 Sdata_in0 / I2S Sdata_in */
#define GPIO30_SDATA_OUT        30      /* AC97/I2S Sdata_out */
#define GPIO31_SYNC             31      /* AC97/I2S sync */
#define GPIO32_SDATA_IN1        32      /* AC97 Sdata_in1 */
#define GPIO32_SYSCLK           32      /* I2S System Clock */
#define GPIO32_MMCCLK           32      /* MMC Clock (PXA270) */
#define GPIO33_nCS_5            33      /* chip select 5 */
#define GPIO34_FFRXD            34      /* FFUART receive */
#define GPIO34_MMCCS0           34      /* MMC Chip Select 0 */
#define GPIO35_FFCTS            35      /* FFUART Clear to send */
#define GPIO36_FFDCD            36      /* FFUART Data carrier detect */
#define GPIO37_FFDSR            37      /* FFUART data set ready */
#define GPIO38_FFRI             38      /* FFUART Ring Indicator */
#define GPIO39_MMCCS1           39      /* MMC Chip Select 1 */
#define GPIO39_FFTXD            39      /* FFUART transmit data */
#define GPIO40_FFDTR            40      /* FFUART data terminal Ready */
#define GPIO41_FFRTS            41      /* FFUART request to send */
#define GPIO42_BTRXD            42      /* BTUART receive data */
#define GPIO42_HWRXD            42      /* HWUART receive data */
#define GPIO43_BTTXD            43      /* BTUART transmit data */
#define GPIO43_HWTXD            43      /* HWUART transmit data */
#define GPIO44_BTCTS            44      /* BTUART clear to send */
#define GPIO44_HWCTS            44      /* HWUART clear to send */
#define GPIO45_BTRTS            45      /* BTUART request to send */
#define GPIO45_HWRTS            45      /* HWUART request to send */
#define GPIO45_AC97_SYSCLK      45      /* AC97 System Clock */
#define GPIO46_ICPRXD           46      /* ICP receive data */
#define GPIO46_STRXD            46      /* STD_UART receive data */
#define GPIO47_ICPTXD           47      /* ICP transmit data */
#define GPIO47_STTXD            47      /* STD_UART transmit data */
#define GPIO48_nPOE             48      /* Output Enable for Card Space */
#define GPIO49_nPWE             49      /* Write Enable for Card Space */
#define GPIO50_nPIOR            50      /* I/O Read for Card Space */
#define GPIO51_nPIOW            51      /* I/O Write for Card Space */
#define GPIO52_nPCE_1           52      /* Card Enable for Card Space */
#define GPIO53_nPCE_2           53      /* Card Enable for Card Space */
#define GPIO53_MMCCLK           53      /* MMC Clock */
#define GPIO54_MMCCLK           54      /* MMC Clock */
#define GPIO54_pSKTSEL          54      /* Socket Select for Card Space */
#define GPIO54_nPCE_2           54      /* Card Enable for Card Space (PXA27x) */
#define GPIO55_nPREG            55      /* Card Address bit 26 */
#define GPIO56_nPWAIT           56      /* Wait signal for Card Space */
#define GPIO57_nIOIS16          57      /* Bus Width select for I/O Card Space */
#define GPIO58_LDD_0            58      /* LCD data pin 0 */
#define GPIO59_LDD_1            59      /* LCD data pin 1 */
#define GPIO60_LDD_2            60      /* LCD data pin 2 */
#define GPIO61_LDD_3            61      /* LCD data pin 3 */
#define GPIO62_LDD_4            62      /* LCD data pin 4 */
#define GPIO63_LDD_5            63      /* LCD data pin 5 */
#define GPIO64_LDD_6            64      /* LCD data pin 6 */
#define GPIO65_LDD_7            65      /* LCD data pin 7 */
#define GPIO66_LDD_8            66      /* LCD data pin 8 */
#define GPIO66_MBREQ            66      /* alternate bus master req */
#define GPIO67_LDD_9            67      /* LCD data pin 9 */
#define GPIO67_MMCCS0           67      /* MMC Chip Select 0 */
#define GPIO68_LDD_10           68      /* LCD data pin 10 */
#define GPIO68_MMCCS1           68      /* MMC Chip Select 1 */
#define GPIO69_LDD_11           69      /* LCD data pin 11 */
#define GPIO69_MMCCLK           69      /* MMC_CLK */
#define GPIO70_LDD_12           70      /* LCD data pin 12 */
#define GPIO70_RTCCLK           70      /* Real Time clock (1 Hz) */
#define GPIO71_LDD_13           71      /* LCD data pin 13 */
#define GPIO71_3_6MHz           71      /* 3.6 MHz Oscillator clock */
#define GPIO72_LDD_14           72      /* LCD data pin 14 */
#define GPIO72_32kHz            72      /* 32 kHz clock */
#define GPIO73_LDD_15           73      /* LCD data pin 15 */
#define GPIO73_MBGNT            73      /* Memory controller grant */
#define GPIO74_LCD_FCLK         74      /* LCD Frame clock */
#define GPIO75_LCD_LCLK         75      /* LCD line clock */
#define GPIO76_LCD_PCLK         76      /* LCD Pixel clock */
#define GPIO77_LCD_ACBIAS       77      /* LCD AC Bias */
#define GPIO78_nCS_2            78      /* chip select 2 */
#define GPIO79_nCS_3            79      /* chip select 3 */
#define GPIO80_nCS_4            80      /* chip select 4 */
#define GPIO81_NSCLK            81      /* NSSP clock */
#define GPIO82_NSFRM            82      /* NSSP Frame */
#define GPIO83_NSTXD            83      /* NSSP transmit */
#define GPIO84_NSRXD            84      /* NSSP receive */
#define GPIO85_nPCE_1           85      /* Card Enable for Card Space (PXA27x) */
#define GPIO92_MMCDAT0          92      /* MMC DAT0 (PXA27x) */
#define GPIO102_nPCE_1          102     /* PCMCIA (PXA27x) */
#define GPIO109_MMCDAT1         109     /* MMC DAT1 (PXA27x) */
#define GPIO110_MMCDAT2         110     /* MMC DAT2 (PXA27x) */
#define GPIO110_MMCCS0          110     /* MMC Chip Select 0 (PXA27x) */
#define GPIO111_MMCDAT3         111     /* MMC DAT3 (PXA27x) */
#define GPIO111_MMCCS1          111     /* MMC Chip Select 1 (PXA27x) */
#define GPIO112_MMCCMD          112     /* MMC CMD (PXA27x) */
#define GPIO113_I2S_SYSCLK      113     /* I2S System Clock (PXA27x) */
#define GPIO113_AC97_RESET_N    113     /* AC97 NRESET on (PXA27x) */

/* GPIO alternate function mode & direction */

#define GPIO_IN                 0x000
#define GPIO_OUT                0x080
#define GPIO_ALT_FN_1_IN        0x100
#define GPIO_ALT_FN_1_OUT       0x180
#define GPIO_ALT_FN_2_IN        0x200
#define GPIO_ALT_FN_2_OUT       0x280
#define GPIO_ALT_FN_3_IN        0x300
#define GPIO_ALT_FN_3_OUT       0x380
#define GPIO_MD_MASK_NR         0x07f
#define GPIO_MD_MASK_DIR        0x080
#define GPIO_MD_MASK_FN         0x300
#define GPIO_DFLT_LOW           0x400
#define GPIO_DFLT_HIGH          0x800

#define GPIO1_RTS_MD            ( 1 | GPIO_ALT_FN_1_IN)
#define GPIO6_MMCCLK_MD         ( 6 | GPIO_ALT_FN_1_OUT)
#define GPIO7_48MHz_MD          ( 7 | GPIO_ALT_FN_1_OUT)
#define GPIO8_MMCCS0_MD         ( 8 | GPIO_ALT_FN_1_OUT)
#define GPIO9_MMCCS1_MD         ( 9 | GPIO_ALT_FN_1_OUT)
#define GPIO10_RTCCLK_MD        (10 | GPIO_ALT_FN_1_OUT)
#define GPIO11_3_6MHz_MD        (11 | GPIO_ALT_FN_1_OUT)
#define GPIO12_32KHz_MD         (12 | GPIO_ALT_FN_1_OUT)
#define GPIO13_MBGNT_MD         (13 | GPIO_ALT_FN_2_OUT)
#define GPIO14_MBREQ_MD         (14 | GPIO_ALT_FN_1_IN)
#define GPIO15_nCS_1_MD         (15 | GPIO_ALT_FN_2_OUT)
#define GPIO16_PWM0_MD          (16 | GPIO_ALT_FN_2_OUT)
#define GPIO17_PWM1_MD          (17 | GPIO_ALT_FN_2_OUT)
#define GPIO18_RDY_MD           (18 | GPIO_ALT_FN_1_IN)
#define GPIO19_DREQ1_MD         (19 | GPIO_ALT_FN_1_IN)
#define GPIO20_DREQ0_MD         (20 | GPIO_ALT_FN_1_IN)
#define GPIO23_SCLK_MD          (23 | GPIO_ALT_FN_2_OUT)
#define GPIO24_SFRM_MD          (24 | GPIO_ALT_FN_2_OUT)
#define GPIO25_STXD_MD          (25 | GPIO_ALT_FN_2_OUT)
#define GPIO26_SRXD_MD          (26 | GPIO_ALT_FN_1_IN)
#define GPIO27_SEXTCLK_MD       (27 | GPIO_ALT_FN_1_IN)
#define GPIO28_BITCLK_AC97_MD   (28 | GPIO_ALT_FN_1_IN)
#define GPIO28_BITCLK_IN_I2S_MD (28 | GPIO_ALT_FN_2_IN)
#define GPIO28_BITCLK_OUT_I2S_MD        (28 | GPIO_ALT_FN_1_OUT)
#define GPIO29_SDATA_IN_AC97_MD (29 | GPIO_ALT_FN_1_IN)
#define GPIO29_SDATA_IN_I2S_MD  (29 | GPIO_ALT_FN_2_IN)
#define GPIO30_SDATA_OUT_AC97_MD        (30 | GPIO_ALT_FN_2_OUT)
#define GPIO30_SDATA_OUT_I2S_MD (30 | GPIO_ALT_FN_1_OUT)
#define GPIO31_SYNC_I2S_MD      (31 | GPIO_ALT_FN_1_OUT)
#define GPIO31_SYNC_AC97_MD     (31 | GPIO_ALT_FN_2_OUT)
#define GPIO32_SDATA_IN1_AC97_MD        (32 | GPIO_ALT_FN_1_IN)
#define GPIO32_SYSCLK_I2S_MD    (32 | GPIO_ALT_FN_1_OUT)
#define GPIO32_MMCCLK_MD                ( 32 | GPIO_ALT_FN_2_OUT)
#define GPIO33_nCS_5_MD         (33 | GPIO_ALT_FN_2_OUT)
#define GPIO34_FFRXD_MD         (34 | GPIO_ALT_FN_1_IN)
#define GPIO34_MMCCS0_MD        (34 | GPIO_ALT_FN_2_OUT)
#define GPIO35_FFCTS_MD         (35 | GPIO_ALT_FN_1_IN)
#define GPIO36_FFDCD_MD         (36 | GPIO_ALT_FN_1_IN)
#define GPIO37_FFDSR_MD         (37 | GPIO_ALT_FN_1_IN)
#define GPIO38_FFRI_MD          (38 | GPIO_ALT_FN_1_IN)
#define GPIO39_MMCCS1_MD        (39 | GPIO_ALT_FN_1_OUT)
#define GPIO39_FFTXD_MD         (39 | GPIO_ALT_FN_2_OUT)
#define GPIO40_FFDTR_MD         (40 | GPIO_ALT_FN_2_OUT)
#define GPIO41_FFRTS_MD         (41 | GPIO_ALT_FN_2_OUT)
#define GPIO42_BTRXD_MD         (42 | GPIO_ALT_FN_1_IN)
#define GPIO42_HWRXD_MD         (42 | GPIO_ALT_FN_3_IN)
#define GPIO43_BTTXD_MD         (43 | GPIO_ALT_FN_2_OUT)
#define GPIO43_HWTXD_MD         (43 | GPIO_ALT_FN_3_OUT)
#define GPIO44_BTCTS_MD         (44 | GPIO_ALT_FN_1_IN)
#define GPIO44_HWCTS_MD         (44 | GPIO_ALT_FN_3_IN)
#define GPIO45_BTRTS_MD         (45 | GPIO_ALT_FN_2_OUT)
#define GPIO45_HWRTS_MD         (45 | GPIO_ALT_FN_3_OUT)
#define GPIO45_SYSCLK_AC97_MD           (45 | GPIO_ALT_FN_1_OUT)
#define GPIO46_ICPRXD_MD        (46 | GPIO_ALT_FN_1_IN)
#define GPIO46_STRXD_MD         (46 | GPIO_ALT_FN_2_IN)
#define GPIO47_ICPTXD_MD        (47 | GPIO_ALT_FN_2_OUT)
#define GPIO47_STTXD_MD         (47 | GPIO_ALT_FN_1_OUT)
#define GPIO48_nPOE_MD          (48 | GPIO_ALT_FN_2_OUT)
#define GPIO48_HWTXD_MD         (48 | GPIO_ALT_FN_1_OUT)
#define GPIO48_nPOE_MD          (48 | GPIO_ALT_FN_2_OUT)
#define GPIO49_HWRXD_MD         (49 | GPIO_ALT_FN_1_IN)
#define GPIO49_nPWE_MD          (49 | GPIO_ALT_FN_2_OUT)
#define GPIO50_nPIOR_MD         (50 | GPIO_ALT_FN_2_OUT)
#define GPIO50_HWCTS_MD         (50 | GPIO_ALT_FN_1_IN)
#define GPIO51_HWRTS_MD         (51 | GPIO_ALT_FN_1_OUT)
#define GPIO51_nPIOW_MD         (51 | GPIO_ALT_FN_2_OUT)
#define GPIO52_nPCE_1_MD        (52 | GPIO_ALT_FN_2_OUT)
#define GPIO53_nPCE_2_MD        (53 | GPIO_ALT_FN_2_OUT)
#define GPIO53_MMCCLK_MD        (53 | GPIO_ALT_FN_1_OUT)
#define GPIO54_MMCCLK_MD        (54 | GPIO_ALT_FN_1_OUT)
#define GPIO54_nPCE_2_MD        (54 | GPIO_ALT_FN_2_OUT)
#define GPIO54_pSKTSEL_MD       (54 | GPIO_ALT_FN_2_OUT)
#define GPIO55_nPREG_MD         (55 | GPIO_ALT_FN_2_OUT)
#define GPIO56_nPWAIT_MD        (56 | GPIO_ALT_FN_1_IN)
#define GPIO57_nIOIS16_MD       (57 | GPIO_ALT_FN_1_IN)
#define GPIO58_LDD_0_MD         (58 | GPIO_ALT_FN_2_OUT)
#define GPIO59_LDD_1_MD         (59 | GPIO_ALT_FN_2_OUT)
#define GPIO60_LDD_2_MD         (60 | GPIO_ALT_FN_2_OUT)
#define GPIO61_LDD_3_MD         (61 | GPIO_ALT_FN_2_OUT)
#define GPIO62_LDD_4_MD         (62 | GPIO_ALT_FN_2_OUT)
#define GPIO63_LDD_5_MD         (63 | GPIO_ALT_FN_2_OUT)
#define GPIO64_LDD_6_MD         (64 | GPIO_ALT_FN_2_OUT)
#define GPIO65_LDD_7_MD         (65 | GPIO_ALT_FN_2_OUT)
#define GPIO66_LDD_8_MD         (66 | GPIO_ALT_FN_2_OUT)
#define GPIO66_MBREQ_MD         (66 | GPIO_ALT_FN_1_IN)
#define GPIO67_LDD_9_MD         (67 | GPIO_ALT_FN_2_OUT)
#define GPIO67_MMCCS0_MD        (67 | GPIO_ALT_FN_1_OUT)
#define GPIO68_LDD_10_MD        (68 | GPIO_ALT_FN_2_OUT)
#define GPIO68_MMCCS1_MD        (68 | GPIO_ALT_FN_1_OUT)
#define GPIO69_LDD_11_MD        (69 | GPIO_ALT_FN_2_OUT)
#define GPIO69_MMCCLK_MD        (69 | GPIO_ALT_FN_1_OUT)
#define GPIO70_LDD_12_MD        (70 | GPIO_ALT_FN_2_OUT)
#define GPIO70_RTCCLK_MD        (70 | GPIO_ALT_FN_1_OUT)
#define GPIO71_LDD_13_MD        (71 | GPIO_ALT_FN_2_OUT)
#define GPIO71_3_6MHz_MD        (71 | GPIO_ALT_FN_1_OUT)
#define GPIO72_LDD_14_MD        (72 | GPIO_ALT_FN_2_OUT)
#define GPIO72_32kHz_MD         (72 | GPIO_ALT_FN_1_OUT)
#define GPIO73_LDD_15_MD        (73 | GPIO_ALT_FN_2_OUT)
#define GPIO73_MBGNT_MD         (73 | GPIO_ALT_FN_1_OUT)
#define GPIO74_LCD_FCLK_MD      (74 | GPIO_ALT_FN_2_OUT)
#define GPIO75_LCD_LCLK_MD      (75 | GPIO_ALT_FN_2_OUT)
#define GPIO76_LCD_PCLK_MD      (76 | GPIO_ALT_FN_2_OUT)
#define GPIO77_LCD_ACBIAS_MD    (77 | GPIO_ALT_FN_2_OUT)
#define GPIO78_nCS_2_MD         (78 | GPIO_ALT_FN_2_OUT)
#define GPIO79_nCS_3_MD         (79 | GPIO_ALT_FN_2_OUT)
#define GPIO79_pSKTSEL_MD       (79 | GPIO_ALT_FN_1_OUT)
#define GPIO80_nCS_4_MD         (80 | GPIO_ALT_FN_2_OUT)
#define GPIO81_NSSP_CLK_OUT     (81 | GPIO_ALT_FN_1_OUT)
#define GPIO81_NSSP_CLK_IN      (81 | GPIO_ALT_FN_1_IN)
#define GPIO82_NSSP_FRM_OUT     (82 | GPIO_ALT_FN_1_OUT)
#define GPIO82_NSSP_FRM_IN      (82 | GPIO_ALT_FN_1_IN)
#define GPIO83_NSSP_TX          (83 | GPIO_ALT_FN_1_OUT)
#define GPIO83_NSSP_RX          (83 | GPIO_ALT_FN_2_IN)
#define GPIO84_NSSP_TX          (84 | GPIO_ALT_FN_1_OUT)
#define GPIO84_NSSP_RX          (84 | GPIO_ALT_FN_2_IN)
#define GPIO85_nPCE_1_MD        (85 | GPIO_ALT_FN_1_OUT)
#define GPIO92_MMCDAT0_MD       (92 | GPIO_ALT_FN_1_OUT)
#define GPIO102_nPCE_1_MD       (102 | GPIO_ALT_FN_1_OUT)
#define GPIO104_pSKTSEL_MD      (104 | GPIO_ALT_FN_1_OUT)
#define GPIO109_MMCDAT1_MD      (109 | GPIO_ALT_FN_1_OUT)
#define GPIO110_MMCDAT2_MD      (110 | GPIO_ALT_FN_1_OUT)
#define GPIO110_MMCCS0_MD       (110 | GPIO_ALT_FN_1_OUT)
#define GPIO111_MMCDAT3_MD      (111 | GPIO_ALT_FN_1_OUT)
#define GPIO110_MMCCS1_MD       (111 | GPIO_ALT_FN_1_OUT)
#define GPIO112_MMCCMD_MD       (112 | GPIO_ALT_FN_1_OUT)
#define GPIO113_I2S_SYSCLK_MD   (113 | GPIO_ALT_FN_1_OUT)
#define GPIO113_AC97_RESET_N_MD (113 | GPIO_ALT_FN_2_OUT)
#define GPIO117_I2CSCL_MD       (117 | GPIO_ALT_FN_1_IN)
#define GPIO118_I2CSDA_MD       (118 | GPIO_ALT_FN_1_IN)

/*
 * Power Manager
 */

#define PMCR            __REG(0x40F00000)  /* Power Manager Control Register */
#define PSSR            __REG(0x40F00004)  /* Power Manager Sleep Status Register */
#define PSPR            __REG(0x40F00008)  /* Power Manager Scratch Pad Register */
#define PWER            __REG(0x40F0000C)  /* Power Manager Wake-up Enable Register */
#define PRER            __REG(0x40F00010)  /* Power Manager GPIO Rising-Edge Detect Enable Register */
#define PFER            __REG(0x40F00014)  /* Power Manager GPIO Falling-Edge Detect Enable Register */
#define PEDR            __REG(0x40F00018)  /* Power Manager GPIO Edge Detect Status Register */
#define PCFR            __REG(0x40F0001C)  /* Power Manager General Configuration Register */
#define PGSR0           __REG(0x40F00020)  /* Power Manager GPIO Sleep State Register for GP[31-0] */
#define PGSR1           __REG(0x40F00024)  /* Power Manager GPIO Sleep State Register for GP[63-32] */
#define PGSR2           __REG(0x40F00028)  /* Power Manager GPIO Sleep State Register for GP[84-64] */
#define PGSR3           __REG(0x40F0002C)  /* Power Manager GPIO Sleep State Register for GP[118-96] */
#define RCSR            __REG(0x40F00030)  /* Reset Controller Status Register */

#define PSLR            __REG(0x40F00034)       /* Power Manager Sleep Config Register */
#define PSTR            __REG(0x40F00038)       /*Power Manager Standby Config Register */
#define PSNR            __REG(0x40F0003C)       /*Power Manager Sense Config Register */
#define PVCR            __REG(0x40F00040)       /*Power Manager VoltageControl Register */
#define PKWR            __REG(0x40F00050)       /* Power Manager KB Wake-up Enable Reg */
#define PKSR            __REG(0x40F00054)       /* Power Manager KB Level-Detect Register */
#define PCMD(x) __REG2(0x40F00080, (x)<<2)
#define PCMD0   __REG(0x40F00080 + 0 * 4)
#define PCMD1   __REG(0x40F00080 + 1 * 4)
#define PCMD2   __REG(0x40F00080 + 2 * 4)
#define PCMD3   __REG(0x40F00080 + 3 * 4)
#define PCMD4   __REG(0x40F00080 + 4 * 4)
#define PCMD5   __REG(0x40F00080 + 5 * 4)
#define PCMD6   __REG(0x40F00080 + 6 * 4)
#define PCMD7   __REG(0x40F00080 + 7 * 4)
#define PCMD8   __REG(0x40F00080 + 8 * 4)
#define PCMD9   __REG(0x40F00080 + 9 * 4)
#define PCMD10  __REG(0x40F00080 + 10 * 4)
#define PCMD11  __REG(0x40F00080 + 11 * 4)
#define PCMD12  __REG(0x40F00080 + 12 * 4)
#define PCMD13  __REG(0x40F00080 + 13 * 4)
#define PCMD14  __REG(0x40F00080 + 14 * 4)
#define PCMD15  __REG(0x40F00080 + 15 * 4)
#define PCMD16  __REG(0x40F00080 + 16 * 4)
#define PCMD17  __REG(0x40F00080 + 17 * 4)
#define PCMD18  __REG(0x40F00080 + 18 * 4)
#define PCMD19  __REG(0x40F00080 + 19 * 4)
#define PCMD20  __REG(0x40F00080 + 20 * 4)
#define PCMD21  __REG(0x40F00080 + 21 * 4)
#define PCMD22  __REG(0x40F00080 + 22 * 4)
#define PCMD23  __REG(0x40F00080 + 23 * 4)
#define PCMD24  __REG(0x40F00080 + 24 * 4)
#define PCMD25  __REG(0x40F00080 + 25 * 4)
#define PCMD26  __REG(0x40F00080 + 26 * 4)
#define PCMD27  __REG(0x40F00080 + 27 * 4)
#define PCMD28  __REG(0x40F00080 + 28 * 4)
#define PCMD29  __REG(0x40F00080 + 29 * 4)
#define PCMD30  __REG(0x40F00080 + 30 * 4)
#define PCMD31  __REG(0x40F00080 + 31 * 4)

#define PCMD_MBC        (1<<12)
#define PCMD_DCE        (1<<11)
#define PCMD_LC (1<<10)
/* FIXME:  PCMD_SQC need be checked.   */
#define PCMD_SQC        (3<<8)  /* currently only bit 8 is changeable,
                                   bit 9 should be 0 all day. */
#define PVCR_VCSA       (0x1<<14)
#define PVCR_CommandDelay (0xf80)
#define PCFR_PI2C_EN    (0x1 << 6)

#define PSSR_OTGPH      (1 << 6)        /* OTG Peripheral control Hold */
#define PSSR_RDH        (1 << 5)        /* Read Disable Hold */
#define PSSR_PH         (1 << 4)        /* Peripheral Control Hold */
#define PSSR_STS        (1 << 3)        /* Standby Mode Status */
#define PSSR_VFS        (1 << 2)        /* VDD Fault Status */
#define PSSR_BFS        (1 << 1)        /* Battery Fault Status */
#define PSSR_SSS        (1 << 0)        /* Software Sleep Status */

#define PSLR_SL_ROD     (1 << 20)       /* Sleep-Mode/Depp-Sleep Mode nRESET_OUT Disable */

#define PCFR_RO         (1 << 15)       /* RDH Override */
#define PCFR_PO         (1 << 14)       /* PH Override */
#define PCFR_GPROD      (1 << 12)       /* GPIO nRESET_OUT Disable */
#define PCFR_L1_EN      (1 << 11)       /* Sleep Mode L1 converter Enable */
#define PCFR_FVC        (1 << 10)       /* Frequency/Voltage Change */
#define PCFR_DC_EN      (1 << 7)        /* Sleep/deep-sleep DC-DC Converter Enable */
#define PCFR_PI2CEN     (1 << 6)        /* Enable PI2C controller */
#define PCFR_GPR_EN     (1 << 4)        /* nRESET_GPIO Pin Enable */
#define PCFR_DS         (1 << 3)        /* Deep Sleep Mode */
#define PCFR_FS         (1 << 2)        /* Float Static Chip Selects */
#define PCFR_FP         (1 << 1)        /* Float PCMCIA controls */
#define PCFR_OPDE       (1 << 0)        /* 3.6864 MHz oscillator power-down enable */

#define RCSR_GPR        (1 << 3)        /* GPIO Reset */
#define RCSR_SMR        (1 << 2)        /* Sleep Mode */
#define RCSR_WDR        (1 << 1)        /* Watchdog Reset */
#define RCSR_HWR        (1 << 0)        /* Hardware Reset */

#define PWER_GPIO(Nb)   (1 << Nb)       /* GPIO [0..15] wake-up enable     */
#define PWER_GPIO0      PWER_GPIO (0)   /* GPIO  [0] wake-up enable        */
#define PWER_GPIO1      PWER_GPIO (1)   /* GPIO  [1] wake-up enable        */
#define PWER_GPIO2      PWER_GPIO (2)   /* GPIO  [2] wake-up enable        */
#define PWER_GPIO3      PWER_GPIO (3)   /* GPIO  [3] wake-up enable        */
#define PWER_GPIO4      PWER_GPIO (4)   /* GPIO  [4] wake-up enable        */
#define PWER_GPIO5      PWER_GPIO (5)   /* GPIO  [5] wake-up enable        */
#define PWER_GPIO6      PWER_GPIO (6)   /* GPIO  [6] wake-up enable        */
#define PWER_GPIO7      PWER_GPIO (7)   /* GPIO  [7] wake-up enable        */
#define PWER_GPIO8      PWER_GPIO (8)   /* GPIO  [8] wake-up enable        */
#define PWER_GPIO9      PWER_GPIO (9)   /* GPIO  [9] wake-up enable        */
#define PWER_GPIO10     PWER_GPIO (10)  /* GPIO [10] wake-up enable        */
#define PWER_GPIO11     PWER_GPIO (11)  /* GPIO [11] wake-up enable        */
#define PWER_GPIO12     PWER_GPIO (12)  /* GPIO [12] wake-up enable        */
#define PWER_GPIO13     PWER_GPIO (13)  /* GPIO [13] wake-up enable        */
#define PWER_GPIO14     PWER_GPIO (14)  /* GPIO [14] wake-up enable        */
#define PWER_GPIO15     PWER_GPIO (15)  /* GPIO [15] wake-up enable        */
#define PWER_RTC        0x80000000      /* RTC alarm wake-up enable        */

/*
 * SSP Serial Port Registers - see include/asm-arm/arch-pxa/regs-ssp.h
 */

/*
 * MultiMediaCard (MMC) controller - see drivers/mmc/host/pxamci.h
 */

/*
 * Core Clock
 */

#define CCCR            __REG(0x41300000)  /* Core Clock Configuration Register */
#define CKEN            __REG(0x41300004)  /* Clock Enable Register */
#define OSCC            __REG(0x41300008)  /* Oscillator Configuration Register */
#define CCSR            __REG(0x4130000C)  /* Core Clock Status Register */

#define CCCR_N_MASK     0x0380          /* Run Mode Frequency to Turbo Mode Frequency Multiplier */
#define CCCR_M_MASK     0x0060          /* Memory Frequency to Run Mode Frequency Multiplier */
#define CCCR_L_MASK     0x001f          /* Crystal Frequency to Memory Frequency Multiplier */

#define CKEN_AC97CONF   (31)    /* AC97 Controller Configuration */
#define CKEN_CAMERA     (24)    /* Camera Interface Clock Enable */
#define CKEN_SSP1       (23)    /* SSP1 Unit Clock Enable */
#define CKEN_MEMC       (22)    /* Memory Controller Clock Enable */
#define CKEN_MEMSTK     (21)    /* Memory Stick Host Controller */
#define CKEN_IM         (20)    /* Internal Memory Clock Enable */
#define CKEN_KEYPAD     (19)    /* Keypad Interface Clock Enable */
#define CKEN_USIM       (18)    /* USIM Unit Clock Enable */
#define CKEN_MSL        (17)    /* MSL Unit Clock Enable */
#define CKEN_LCD        (16)    /* LCD Unit Clock Enable */
#define CKEN_PWRI2C     (15)    /* PWR I2C Unit Clock Enable */
#define CKEN_I2C        (14)    /* I2C Unit Clock Enable */
#define CKEN_FICP       (13)    /* FICP Unit Clock Enable */
#define CKEN_MMC        (12)    /* MMC Unit Clock Enable */
#define CKEN_USB        (11)    /* USB Unit Clock Enable */
#define CKEN_ASSP       (10)    /* ASSP (SSP3) Clock Enable */
#define CKEN_USBHOST    (10)    /* USB Host Unit Clock Enable */
#define CKEN_OSTIMER    (9)     /* OS Timer Unit Clock Enable */
#define CKEN_NSSP       (9)     /* NSSP (SSP2) Clock Enable */
#define CKEN_I2S        (8)     /* I2S Unit Clock Enable */
#define CKEN_BTUART     (7)     /* BTUART Unit Clock Enable */
#define CKEN_FFUART     (6)     /* FFUART Unit Clock Enable */
#define CKEN_STUART     (5)     /* STUART Unit Clock Enable */
#define CKEN_HWUART     (4)     /* HWUART Unit Clock Enable */
#define CKEN_SSP3       (4)     /* SSP3 Unit Clock Enable */
#define CKEN_SSP        (3)     /* SSP Unit Clock Enable */
#define CKEN_SSP2       (3)     /* SSP2 Unit Clock Enable */
#define CKEN_AC97       (2)     /* AC97 Unit Clock Enable */
#define CKEN_PWM1       (1)     /* PWM1 Clock Enable */
#define CKEN_PWM0       (0)     /* PWM0 Clock Enable */

#define OSCC_OON        (1 << 1)        /* 32.768kHz OON (write-once only bit) */
#define OSCC_OOK        (1 << 0)        /* 32.768kHz OOK (read-only bit) */


/*
 * LCD
 */

#define LCCR0           __REG(0x44000000)  /* LCD Controller Control Register 0 */
#define LCCR1           __REG(0x44000004)  /* LCD Controller Control Register 1 */
#define LCCR2           __REG(0x44000008)  /* LCD Controller Control Register 2 */
#define LCCR3           __REG(0x4400000C)  /* LCD Controller Control Register 3 */
#define LCCR4           __REG(0x44000010)  /* LCD Controller Control Register 3 */
#define DFBR0           __REG(0x44000020)  /* DMA Channel 0 Frame Branch Register */
#define DFBR1           __REG(0x44000024)  /* DMA Channel 1 Frame Branch Register */
#define LCSR            __REG(0x44000038)  /* LCD Controller Status Register */
#define LIIDR           __REG(0x4400003C)  /* LCD Controller Interrupt ID Register */
#define TMEDRGBR        __REG(0x44000040)  /* TMED RGB Seed Register */
#define TMEDCR          __REG(0x44000044)  /* TMED Control Register */

#define LCCR3_1BPP (0 << 24)
#define LCCR3_2BPP (1 << 24)
#define LCCR3_4BPP (2 << 24)
#define LCCR3_8BPP (3 << 24)
#define LCCR3_16BPP (4 << 24)

#define LCCR3_PDFOR_0 (0 << 30)
#define LCCR3_PDFOR_1 (1 << 30)
#define LCCR3_PDFOR_2 (2 << 30)
#define LCCR3_PDFOR_3 (3 << 30)

#define LCCR4_PAL_FOR_0 (0 << 15)
#define LCCR4_PAL_FOR_1 (1 << 15)
#define LCCR4_PAL_FOR_2 (2 << 15)
#define LCCR4_PAL_FOR_MASK (3 << 15)

#define FDADR0          __REG(0x44000200)  /* DMA Channel 0 Frame Descriptor Address Register */
#define FSADR0          __REG(0x44000204)  /* DMA Channel 0 Frame Source Address Register */
#define FIDR0           __REG(0x44000208)  /* DMA Channel 0 Frame ID Register */
#define LDCMD0          __REG(0x4400020C)  /* DMA Channel 0 Command Register */
#define FDADR1          __REG(0x44000210)  /* DMA Channel 1 Frame Descriptor Address Register */
#define FSADR1          __REG(0x44000214)  /* DMA Channel 1 Frame Source Address Register */
#define FIDR1           __REG(0x44000218)  /* DMA Channel 1 Frame ID Register */
#define LDCMD1          __REG(0x4400021C)  /* DMA Channel 1 Command Register */

#define LCCR0_ENB       (1 << 0)        /* LCD Controller enable */
#define LCCR0_CMS       (1 << 1)        /* Color/Monochrome Display Select */
#define LCCR0_Color     (LCCR0_CMS*0)   /*  Color display                  */
#define LCCR0_Mono      (LCCR0_CMS*1)   /*  Monochrome display             */
#define LCCR0_SDS       (1 << 2)        /* Single/Dual Panel Display       */
                                        /* Select                          */
#define LCCR0_Sngl      (LCCR0_SDS*0)   /*  Single panel display           */
#define LCCR0_Dual      (LCCR0_SDS*1)   /*  Dual panel display             */

#define LCCR0_LDM       (1 << 3)        /* LCD Disable Done Mask */
#define LCCR0_SFM       (1 << 4)        /* Start of frame mask */
#define LCCR0_IUM       (1 << 5)        /* Input FIFO underrun mask */
#define LCCR0_EFM       (1 << 6)        /* End of Frame mask */
#define LCCR0_PAS       (1 << 7)        /* Passive/Active display Select   */
#define LCCR0_Pas       (LCCR0_PAS*0)   /*  Passive display (STN)          */
#define LCCR0_Act       (LCCR0_PAS*1)   /*  Active display (TFT)           */
#define LCCR0_DPD       (1 << 9)        /* Double Pixel Data (monochrome   */
                                        /* display mode)                   */
#define LCCR0_4PixMono  (LCCR0_DPD*0)   /*  4-Pixel/clock Monochrome       */
                                        /*  display                        */
#define LCCR0_8PixMono  (LCCR0_DPD*1)   /*  8-Pixel/clock Monochrome       */
                                        /*  display                        */
#define LCCR0_DIS       (1 << 10)       /* LCD Disable */
#define LCCR0_QDM       (1 << 11)       /* LCD Quick Disable mask */
#define LCCR0_PDD       (0xff << 12)    /* Palette DMA request delay */
#define LCCR0_PDD_S     12
#define LCCR0_BM        (1 << 20)       /* Branch mask */
#define LCCR0_OUM       (1 << 21)       /* Output FIFO underrun mask */
#define LCCR0_LCDT      (1 << 22)       /* LCD panel type */
#define LCCR0_RDSTM     (1 << 23)       /* Read status interrupt mask */
#define LCCR0_CMDIM     (1 << 24)       /* Command interrupt mask */
#define LCCR0_OUC       (1 << 25)       /* Overlay Underlay control bit */
#define LCCR0_LDDALT    (1 << 26)       /* LDD alternate mapping control */

#define LCCR1_PPL       Fld (10, 0)      /* Pixels Per Line - 1 */
#define LCCR1_DisWdth(Pixel)            /* Display Width [1..800 pix.]  */ \
                        (((Pixel) - 1) << FShft (LCCR1_PPL))

#define LCCR1_HSW       Fld (6, 10)     /* Horizontal Synchronization     */
#define LCCR1_HorSnchWdth(Tpix)         /* Horizontal Synchronization     */ \
                                        /* pulse Width [1..64 Tpix]       */ \
                        (((Tpix) - 1) << FShft (LCCR1_HSW))

#define LCCR1_ELW       Fld (8, 16)     /* End-of-Line pixel clock Wait    */
                                        /* count - 1 [Tpix]                */
#define LCCR1_EndLnDel(Tpix)            /*  End-of-Line Delay              */ \
                                        /*  [1..256 Tpix]                  */ \
                        (((Tpix) - 1) << FShft (LCCR1_ELW))

#define LCCR1_BLW       Fld (8, 24)     /* Beginning-of-Line pixel clock   */
                                        /* Wait count - 1 [Tpix]           */
#define LCCR1_BegLnDel(Tpix)            /*  Beginning-of-Line Delay        */ \
                                        /*  [1..256 Tpix]                  */ \
                        (((Tpix) - 1) << FShft (LCCR1_BLW))


#define LCCR2_LPP       Fld (10, 0)     /* Line Per Panel - 1              */
#define LCCR2_DisHght(Line)             /*  Display Height [1..1024 lines] */ \
                        (((Line) - 1) << FShft (LCCR2_LPP))

#define LCCR2_VSW       Fld (6, 10)     /* Vertical Synchronization pulse  */
                                        /* Width - 1 [Tln] (L_FCLK)        */
#define LCCR2_VrtSnchWdth(Tln)          /*  Vertical Synchronization pulse */ \
                                        /*  Width [1..64 Tln]              */ \
                        (((Tln) - 1) << FShft (LCCR2_VSW))

#define LCCR2_EFW       Fld (8, 16)     /* End-of-Frame line clock Wait    */
                                        /* count [Tln]                     */
#define LCCR2_EndFrmDel(Tln)            /*  End-of-Frame Delay             */ \
                                        /*  [0..255 Tln]                   */ \
                        ((Tln) << FShft (LCCR2_EFW))

#define LCCR2_BFW       Fld (8, 24)     /* Beginning-of-Frame line clock   */
                                        /* Wait count [Tln]                */
#define LCCR2_BegFrmDel(Tln)            /*  Beginning-of-Frame Delay       */ \
                                        /*  [0..255 Tln]                   */ \
                        ((Tln) << FShft (LCCR2_BFW))

#if 0
#define LCCR3_PCD       (0xff)          /* Pixel clock divisor */
#define LCCR3_ACB       (0xff << 8)     /* AC Bias pin frequency */
#define LCCR3_ACB_S     8
#endif

#define LCCR3_API       (0xf << 16)     /* AC Bias pin trasitions per interrupt */
#define LCCR3_API_S     16
#define LCCR3_VSP       (1 << 20)       /* vertical sync polarity */
#define LCCR3_HSP       (1 << 21)       /* horizontal sync polarity */
#define LCCR3_PCP       (1 << 22)       /* Pixel Clock Polarity (L_PCLK)   */
#define LCCR3_PixRsEdg  (LCCR3_PCP*0)   /*  Pixel clock Rising-Edge        */
#define LCCR3_PixFlEdg  (LCCR3_PCP*1)   /*  Pixel clock Falling-Edge       */

#define LCCR3_OEP       (1 << 23)       /* Output Enable Polarity (L_BIAS, */
                                        /* active display mode)            */
#define LCCR3_OutEnH    (LCCR3_OEP*0)   /*  Output Enable active High      */
#define LCCR3_OutEnL    (LCCR3_OEP*1)   /*  Output Enable active Low       */

#if 0
#define LCCR3_BPP       (7 << 24)       /* bits per pixel */
#define LCCR3_BPP_S     24
#endif
#define LCCR3_DPC       (1 << 27)       /* double pixel clock mode */


#define LCCR3_PCD       Fld (8, 0)      /* Pixel Clock Divisor */
#define LCCR3_PixClkDiv(Div)            /* Pixel Clock Divisor */ \
                        (((Div) << FShft (LCCR3_PCD)))


#define LCCR3_BPP       Fld (3, 24)     /* Bit Per Pixel */
#define LCCR3_Bpp(Bpp)                  /* Bit Per Pixel */ \
                        (((Bpp) << FShft (LCCR3_BPP)))

#define LCCR3_ACB       Fld (8, 8)      /* AC Bias */
#define LCCR3_Acb(Acb)                  /* BAC Bias */ \
                        (((Acb) << FShft (LCCR3_ACB)))

#define LCCR3_HorSnchH  (LCCR3_HSP*0)   /*  Horizontal Synchronization     */
                                        /*  pulse active High              */
#define LCCR3_HorSnchL  (LCCR3_HSP*1)   /*  Horizontal Synchronization     */

#define LCCR3_VrtSnchH  (LCCR3_VSP*0)   /*  Vertical Synchronization pulse */
                                        /*  active High                    */
#define LCCR3_VrtSnchL  (LCCR3_VSP*1)   /*  Vertical Synchronization pulse */
                                        /*  active Low                     */

#define LCSR_LDD        (1 << 0)        /* LCD Disable Done */
#define LCSR_SOF        (1 << 1)        /* Start of frame */
#define LCSR_BER        (1 << 2)        /* Bus error */
#define LCSR_ABC        (1 << 3)        /* AC Bias count */
#define LCSR_IUL        (1 << 4)        /* input FIFO underrun Lower panel */
#define LCSR_IUU        (1 << 5)        /* input FIFO underrun Upper panel */
#define LCSR_OU         (1 << 6)        /* output FIFO underrun */
#define LCSR_QD         (1 << 7)        /* quick disable */
#define LCSR_EOF        (1 << 8)        /* end of frame */
#define LCSR_BS         (1 << 9)        /* branch status */
#define LCSR_SINT       (1 << 10)       /* subsequent interrupt */

#define LDCMD_PAL       (1 << 26)       /* instructs DMA to load palette buffer */

#define LCSR_LDD        (1 << 0)        /* LCD Disable Done */
#define LCSR_SOF        (1 << 1)        /* Start of frame */
#define LCSR_BER        (1 << 2)        /* Bus error */
#define LCSR_ABC        (1 << 3)        /* AC Bias count */
#define LCSR_IUL        (1 << 4)        /* input FIFO underrun Lower panel */
#define LCSR_IUU        (1 << 5)        /* input FIFO underrun Upper panel */
#define LCSR_OU         (1 << 6)        /* output FIFO underrun */
#define LCSR_QD         (1 << 7)        /* quick disable */
#define LCSR_EOF        (1 << 8)        /* end of frame */
#define LCSR_BS         (1 << 9)        /* branch status */
#define LCSR_SINT       (1 << 10)       /* subsequent interrupt */

#define LDCMD_PAL       (1 << 26)       /* instructs DMA to load palette buffer */

#ifdef CONFIG_PXA27x

/*
 * Keypad
 */
#define KPC             __REG(0x41500000) /* Keypad Interface Control register */
#define KPDK            __REG(0x41500008) /* Keypad Interface Direct Key register */
#define KPREC           __REG(0x41500010) /* Keypad Interface Rotary Encoder register */
#define KPMK            __REG(0x41500018) /* Keypad Interface Matrix Key register */
#define KPAS            __REG(0x41500020) /* Keypad Interface Automatic Scan register */
#define KPASMKP0        __REG(0x41500028) /* Keypad Interface Automatic Scan Multiple Key Presser register 0 */
#define KPASMKP1        __REG(0x41500030) /* Keypad Interface Automatic Scan Multiple Key Presser register 1 */
#define KPASMKP2        __REG(0x41500038) /* Keypad Interface Automatic Scan Multiple Key Presser register 2 */
#define KPASMKP3        __REG(0x41500040) /* Keypad Interface Automatic Scan Multiple Key Presser register 3 */
#define KPKDI           __REG(0x41500048) /* Keypad Interface Key Debounce Interval register */

#define KPC_AS          (0x1 << 30)  /* Automatic Scan bit */
#define KPC_ASACT       (0x1 << 29)  /* Automatic Scan on Activity */
#define KPC_MI          (0x1 << 22)  /* Matrix interrupt bit */
#define KPC_IMKP        (0x1 << 21)  /* Ignore Multiple Key Press */
#define KPC_MS7         (0x1 << 20)  /* Matrix scan line 7 */
#define KPC_MS6         (0x1 << 19)  /* Matrix scan line 6 */
#define KPC_MS5         (0x1 << 18)  /* Matrix scan line 5 */
#define KPC_MS4         (0x1 << 17)  /* Matrix scan line 4 */
#define KPC_MS3         (0x1 << 16)  /* Matrix scan line 3 */
#define KPC_MS2         (0x1 << 15)  /* Matrix scan line 2 */
#define KPC_MS1         (0x1 << 14)  /* Matrix scan line 1 */
#define KPC_MS0         (0x1 << 13)  /* Matrix scan line 0 */
#define KPC_MS_ALL      (KPC_MS0 | KPC_MS1 | KPC_MS2 | KPC_MS3 | KPC_MS4 | KPC_MS5 | KPC_MS6 | KPC_MS7)
#define KPC_ME          (0x1 << 12)  /* Matrix Keypad Enable */
#define KPC_MIE         (0x1 << 11)  /* Matrix Interrupt Enable */
#define KPC_DK_DEB_SEL  (0x1 <<  9)  /* Direct Keypad Debounce Select */
#define KPC_DI          (0x1 <<  5)  /* Direct key interrupt bit */
#define KPC_RE_ZERO_DEB (0x1 <<  4)  /* Rotary Encoder Zero Debounce */
#define KPC_REE1        (0x1 <<  3)  /* Rotary Encoder1 Enable */
#define KPC_REE0        (0x1 <<  2)  /* Rotary Encoder0 Enable */
#define KPC_DE          (0x1 <<  1)  /* Direct Keypad Enable */
#define KPC_DIE         (0x1 <<  0)  /* Direct Keypad interrupt Enable */

#define KPDK_DKP        (0x1 << 31)
#define KPDK_DK7        (0x1 <<  7)
#define KPDK_DK6        (0x1 <<  6)
#define KPDK_DK5        (0x1 <<  5)
#define KPDK_DK4        (0x1 <<  4)
#define KPDK_DK3        (0x1 <<  3)
#define KPDK_DK2        (0x1 <<  2)
#define KPDK_DK1        (0x1 <<  1)
#define KPDK_DK0        (0x1 <<  0)

#define KPREC_OF1       (0x1 << 31)
#define kPREC_UF1       (0x1 << 30)
#define KPREC_OF0       (0x1 << 15)
#define KPREC_UF0       (0x1 << 14)

#define KPMK_MKP        (0x1 << 31)
#define KPAS_SO         (0x1 << 31)
#define KPASMKPx_SO     (0x1 << 31)

/* Camera Interface */
#define CICR0           __REG(0x50000000)
#define CICR1           __REG(0x50000004)
#define CICR2           __REG(0x50000008)
#define CICR3           __REG(0x5000000C)
#define CICR4           __REG(0x50000010)
#define CISR            __REG(0x50000014)
#define CIFR            __REG(0x50000018)
#define CITOR           __REG(0x5000001C)
#define CIBR0           __REG(0x50000028)
#define CIBR1           __REG(0x50000030)
#define CIBR2           __REG(0x50000038)

#define CICR0_DMAEN     (1 << 31)       /* DMA request enable */
#define CICR0_PAR_EN    (1 << 30)       /* Parity enable */
#define CICR0_SL_CAP_EN (1 << 29)       /* Capture enable for slave mode */
#define CICR0_ENB       (1 << 28)       /* Camera interface enable */
#define CICR0_DIS       (1 << 27)       /* Camera interface disable */
#define CICR0_SIM       (0x7 << 24)     /* Sensor interface mode mask */
#define CICR0_TOM       (1 << 9)        /* Time-out mask */
#define CICR0_RDAVM     (1 << 8)        /* Receive-data-available mask */
#define CICR0_FEM       (1 << 7)        /* FIFO-empty mask */
#define CICR0_EOLM      (1 << 6)        /* End-of-line mask */
#define CICR0_PERRM     (1 << 5)        /* Parity-error mask */
#define CICR0_QDM       (1 << 4)        /* Quick-disable mask */
#define CICR0_CDM       (1 << 3)        /* Disable-done mask */
#define CICR0_SOFM      (1 << 2)        /* Start-of-frame mask */
#define CICR0_EOFM      (1 << 1)        /* End-of-frame mask */
#define CICR0_FOM       (1 << 0)        /* FIFO-overrun mask */

#define CICR1_TBIT      (1 << 31)       /* Transparency bit */
#define CICR1_RGBT_CONV (0x3 << 30)     /* RGBT conversion mask */
#define CICR1_PPL       (0x7ff << 15)   /* Pixels per line mask */
#define CICR1_RGB_CONV  (0x7 << 12)     /* RGB conversion mask */
#define CICR1_RGB_F     (1 << 11)       /* RGB format */
#define CICR1_YCBCR_F   (1 << 10)       /* YCbCr format */
#define CICR1_RGB_BPP   (0x7 << 7)      /* RGB bis per pixel mask */
#define CICR1_RAW_BPP   (0x3 << 5)      /* Raw bis per pixel mask */
#define CICR1_COLOR_SP  (0x3 << 3)      /* Color space mask */
#define CICR1_DW        (0x7 << 0)      /* Data width mask */

#define CICR2_BLW       (0xff << 24)    /* Beginning-of-line pixel clock
                                           wait count mask */
#define CICR2_ELW       (0xff << 16)    /* End-of-line pixel clock
                                           wait count mask */
#define CICR2_HSW       (0x3f << 10)    /* Horizontal sync pulse width mask */
#define CICR2_BFPW      (0x3f << 3)     /* Beginning-of-frame pixel clock
                                           wait count mask */
#define CICR2_FSW       (0x7 << 0)      /* Frame stabilization
                                           wait count mask */

#define CICR3_BFW       (0xff << 24)    /* Beginning-of-frame line clock
                                           wait count mask */
#define CICR3_EFW       (0xff << 16)    /* End-of-frame line clock
                                           wait count mask */
#define CICR3_VSW       (0x3f << 10)    /* Vertical sync pulse width mask */
#define CICR3_BFPW      (0x3f << 3)     /* Beginning-of-frame pixel clock
                                           wait count mask */
#define CICR3_LPF       (0x7ff << 0)    /* Lines per frame mask */

#define CICR4_MCLK_DLY  (0x3 << 24)     /* MCLK Data Capture Delay mask */
#define CICR4_PCLK_EN   (1 << 23)       /* Pixel clock enable */
#define CICR4_PCP       (1 << 22)       /* Pixel clock polarity */
#define CICR4_HSP       (1 << 21)       /* Horizontal sync polarity */
#define CICR4_VSP       (1 << 20)       /* Vertical sync polarity */
#define CICR4_MCLK_EN   (1 << 19)       /* MCLK enable */
#define CICR4_FR_RATE   (0x7 << 8)      /* Frame rate mask */
#define CICR4_DIV       (0xff << 0)     /* Clock divisor mask */

#define CISR_FTO        (1 << 15)       /* FIFO time-out */
#define CISR_RDAV_2     (1 << 14)       /* Channel 2 receive data available */
#define CISR_RDAV_1     (1 << 13)       /* Channel 1 receive data available */
#define CISR_RDAV_0     (1 << 12)       /* Channel 0 receive data available */
#define CISR_FEMPTY_2   (1 << 11)       /* Channel 2 FIFO empty */
#define CISR_FEMPTY_1   (1 << 10)       /* Channel 1 FIFO empty */
#define CISR_FEMPTY_0   (1 << 9)        /* Channel 0 FIFO empty */
#define CISR_EOL        (1 << 8)        /* End of line */
#define CISR_PAR_ERR    (1 << 7)        /* Parity error */
#define CISR_CQD        (1 << 6)        /* Camera interface quick disable */
#define CISR_CDD        (1 << 5)        /* Camera interface disable done */
#define CISR_SOF        (1 << 4)        /* Start of frame */
#define CISR_EOF        (1 << 3)        /* End of frame */
#define CISR_IFO_2      (1 << 2)        /* FIFO overrun for Channel 2 */
#define CISR_IFO_1      (1 << 1)        /* FIFO overrun for Channel 1 */
#define CISR_IFO_0      (1 << 0)        /* FIFO overrun for Channel 0 */

#define CIFR_FLVL2      (0x7f << 23)    /* FIFO 2 level mask */
#define CIFR_FLVL1      (0x7f << 16)    /* FIFO 1 level mask */
#define CIFR_FLVL0      (0xff << 8)     /* FIFO 0 level mask */
#define CIFR_THL_0      (0x3 << 4)      /* Threshold Level for Channel 0 FIFO */
#define CIFR_RESET_F    (1 << 3)        /* Reset input FIFOs */
#define CIFR_FEN2       (1 << 2)        /* FIFO enable for channel 2 */
#define CIFR_FEN1       (1 << 1)        /* FIFO enable for channel 1 */
#define CIFR_FEN0       (1 << 0)        /* FIFO enable for channel 0 */

#define SRAM_SIZE               0x40000 /* 4x64K  */

#define SRAM_MEM_PHYS           0x5C000000

#define IMPMCR          __REG(0x58000000) /* IM Power Management Control Reg */
#define IMPMSR          __REG(0x58000008) /* IM Power Management Status Reg */

#define IMPMCR_PC3              (0x3 << 22) /* Bank 3 Power Control */
#define IMPMCR_PC3_RUN_MODE     (0x0 << 22) /*   Run mode */
#define IMPMCR_PC3_STANDBY_MODE (0x1 << 22) /*   Standby mode */
#define IMPMCR_PC3_AUTO_MODE    (0x3 << 22) /*   Automatically controlled */

#define IMPMCR_PC2              (0x3 << 20) /* Bank 2 Power Control */
#define IMPMCR_PC2_RUN_MODE     (0x0 << 20) /*   Run mode */
#define IMPMCR_PC2_STANDBY_MODE (0x1 << 20) /*   Standby mode */
#define IMPMCR_PC2_AUTO_MODE    (0x3 << 20) /*   Automatically controlled */

#define IMPMCR_PC1              (0x3 << 18) /* Bank 1 Power Control */
#define IMPMCR_PC1_RUN_MODE     (0x0 << 18) /*   Run mode */
#define IMPMCR_PC1_STANDBY_MODE (0x1 << 18) /*   Standby mode */
#define IMPMCR_PC1_AUTO_MODE    (0x3 << 18) /*   Automatically controlled */

#define IMPMCR_PC0              (0x3 << 16) /* Bank 0 Power Control */
#define IMPMCR_PC0_RUN_MODE     (0x0 << 16) /*   Run mode */
#define IMPMCR_PC0_STANDBY_MODE (0x1 << 16) /*   Standby mode */
#define IMPMCR_PC0_AUTO_MODE    (0x3 << 16) /*   Automatically controlled */

#define IMPMCR_AW3              (1 << 11) /* Bank 3 Automatic Wake-up enable */
#define IMPMCR_AW2              (1 << 10) /* Bank 2 Automatic Wake-up enable */
#define IMPMCR_AW1              (1 << 9)  /* Bank 1 Automatic Wake-up enable */
#define IMPMCR_AW0              (1 << 8)  /* Bank 0 Automatic Wake-up enable */

#define IMPMCR_DST              (0xFF << 0) /* Delay Standby Time, ms */

#define IMPMSR_PS3              (0x3 << 6) /* Bank 3 Power Status: */
#define IMPMSR_PS3_RUN_MODE     (0x0 << 6) /*    Run mode */
#define IMPMSR_PS3_STANDBY_MODE (0x1 << 6) /*    Standby mode */

#define IMPMSR_PS2              (0x3 << 4) /* Bank 2 Power Status: */
#define IMPMSR_PS2_RUN_MODE     (0x0 << 4) /*    Run mode */
#define IMPMSR_PS2_STANDBY_MODE (0x1 << 4) /*    Standby mode */

#define IMPMSR_PS1              (0x3 << 2) /* Bank 1 Power Status: */
#define IMPMSR_PS1_RUN_MODE     (0x0 << 2) /*    Run mode */
#define IMPMSR_PS1_STANDBY_MODE (0x1 << 2) /*    Standby mode */

#define IMPMSR_PS0              (0x3 << 0) /* Bank 0 Power Status: */
#define IMPMSR_PS0_RUN_MODE     (0x0 << 0) /*    Run mode */
#define IMPMSR_PS0_STANDBY_MODE (0x1 << 0) /*    Standby mode */

#endif

#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
/*
 * UHC: USB Host Controller (OHCI-like) register definitions
 */
#define UHC_BASE_PHYS   (0x4C000000)
#define UHCREV          __REG(0x4C000000) /* UHC HCI Spec Revision */
#define UHCHCON         __REG(0x4C000004) /* UHC Host Control Register */
#define UHCCOMS         __REG(0x4C000008) /* UHC Command Status Register */
#define UHCINTS         __REG(0x4C00000C) /* UHC Interrupt Status Register */
#define UHCINTE         __REG(0x4C000010) /* UHC Interrupt Enable */
#define UHCINTD         __REG(0x4C000014) /* UHC Interrupt Disable */
#define UHCHCCA         __REG(0x4C000018) /* UHC Host Controller Comm. Area */
#define UHCPCED         __REG(0x4C00001C) /* UHC Period Current Endpt Descr */
#define UHCCHED         __REG(0x4C000020) /* UHC Control Head Endpt Descr */
#define UHCCCED         __REG(0x4C000024) /* UHC Control Current Endpt Descr */
#define UHCBHED         __REG(0x4C000028) /* UHC Bulk Head Endpt Descr */
#define UHCBCED         __REG(0x4C00002C) /* UHC Bulk Current Endpt Descr */
#define UHCDHEAD        __REG(0x4C000030) /* UHC Done Head */
#define UHCFMI          __REG(0x4C000034) /* UHC Frame Interval */
#define UHCFMR          __REG(0x4C000038) /* UHC Frame Remaining */
#define UHCFMN          __REG(0x4C00003C) /* UHC Frame Number */
#define UHCPERS         __REG(0x4C000040) /* UHC Periodic Start */
#define UHCLS           __REG(0x4C000044) /* UHC Low Speed Threshold */

#define UHCRHDA         __REG(0x4C000048) /* UHC Root Hub Descriptor A */
#define UHCRHDA_NOCP    (1 << 12)       /* No over current protection */

#define UHCRHDB         __REG(0x4C00004C) /* UHC Root Hub Descriptor B */
#define UHCRHS          __REG(0x4C000050) /* UHC Root Hub Status */
#define UHCRHPS1        __REG(0x4C000054) /* UHC Root Hub Port 1 Status */
#define UHCRHPS2        __REG(0x4C000058) /* UHC Root Hub Port 2 Status */
#define UHCRHPS3        __REG(0x4C00005C) /* UHC Root Hub Port 3 Status */

#define UHCSTAT         __REG(0x4C000060) /* UHC Status Register */
#define UHCSTAT_UPS3    (1 << 16)       /* USB Power Sense Port3 */
#define UHCSTAT_SBMAI   (1 << 15)       /* System Bus Master Abort Interrupt*/
#define UHCSTAT_SBTAI   (1 << 14)       /* System Bus Target Abort Interrupt*/
#define UHCSTAT_UPRI    (1 << 13)       /* USB Port Resume Interrupt */
#define UHCSTAT_UPS2    (1 << 12)       /* USB Power Sense Port 2 */
#define UHCSTAT_UPS1    (1 << 11)       /* USB Power Sense Port 1 */
#define UHCSTAT_HTA     (1 << 10)       /* HCI Target Abort */
#define UHCSTAT_HBA     (1 << 8)        /* HCI Buffer Active */
#define UHCSTAT_RWUE    (1 << 7)        /* HCI Remote Wake Up Event */

#define UHCHR           __REG(0x4C000064) /* UHC Reset Register */
#define UHCHR_SSEP3     (1 << 11)       /* Sleep Standby Enable for Port3 */
#define UHCHR_SSEP2     (1 << 10)       /* Sleep Standby Enable for Port2 */
#define UHCHR_SSEP1     (1 << 9)        /* Sleep Standby Enable for Port1 */
#define UHCHR_PCPL      (1 << 7)        /* Power control polarity low */
#define UHCHR_PSPL      (1 << 6)        /* Power sense polarity low */
#define UHCHR_SSE       (1 << 5)        /* Sleep Standby Enable */
#define UHCHR_UIT       (1 << 4)        /* USB Interrupt Test */
#define UHCHR_SSDC      (1 << 3)        /* Simulation Scale Down Clock */
#define UHCHR_CGR       (1 << 2)        /* Clock Generation Reset */
#define UHCHR_FHR       (1 << 1)        /* Force Host Controller Reset */
#define UHCHR_FSBIR     (1 << 0)        /* Force System Bus Iface Reset */

#define UHCHIE          __REG(0x4C000068) /* UHC Interrupt Enable Register*/
#define UHCHIE_UPS3IE   (1 << 14)       /* Power Sense Port3 IntEn */
#define UHCHIE_UPRIE    (1 << 13)       /* Port Resume IntEn */
#define UHCHIE_UPS2IE   (1 << 12)       /* Power Sense Port2 IntEn */
#define UHCHIE_UPS1IE   (1 << 11)       /* Power Sense Port1 IntEn */
#define UHCHIE_TAIE     (1 << 10)       /* HCI Interface Transfer Abort
                                           Interrupt Enable*/
#define UHCHIE_HBAIE    (1 << 8)        /* HCI Buffer Active IntEn */
#define UHCHIE_RWIE     (1 << 7)        /* Remote Wake-up IntEn */

#define UHCHIT          __REG(0x4C00006C) /* UHC Interrupt Test register */

#endif /* CONFIG_PXA27x || CONFIG_PXA3xx */

/* PWRMODE register M field values */

#define PWRMODE_IDLE            0x1
#define PWRMODE_STANDBY         0x2
#define PWRMODE_SLEEP           0x3
#define PWRMODE_DEEPSLEEP       0x7

#endif