2 * linux/arch/arm/mach-sa1100/collie.c
4 * May be copied or modified under the terms of the GNU General Public
5 * License. See linux/COPYING for more information.
7 * This file contains all Collie-specific tweaks.
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
14 * 2006 Pavel Machek <pavel@suse.cz>
15 * 03-06-2004 John Lenz <lenz@cs.wisc.edu>
16 * 06-04-2002 Chris Larson <kergoth@digitalnemesis.net>
17 * 04-16-2001 Lineo Japan,Inc. ...
20 #include <linux/init.h>
21 #include <linux/kernel.h>
22 #include <linux/tty.h>
23 #include <linux/delay.h>
24 #include <linux/platform_device.h>
25 #include <linux/mtd/mtd.h>
26 #include <linux/mtd/partitions.h>
27 #include <linux/timer.h>
29 #include <asm/hardware.h>
30 #include <asm/mach-types.h>
32 #include <asm/setup.h>
33 #include <asm/arch/collie.h>
35 #include <asm/mach/arch.h>
36 #include <asm/mach/flash.h>
37 #include <asm/mach/map.h>
38 #include <asm/mach/serial_sa1100.h>
40 #include <asm/hardware/scoop.h>
41 #include <asm/mach/sharpsl_param.h>
42 #include <asm/hardware/locomo.h>
43 #include <asm/arch/mcp.h>
47 static struct resource collie_scoop_resources
[] = {
51 .flags
= IORESOURCE_MEM
,
55 static struct scoop_config collie_scoop_setup
= {
56 .io_dir
= COLLIE_SCOOP_IO_DIR
,
57 .io_out
= COLLIE_SCOOP_IO_OUT
,
60 struct platform_device colliescoop_device
= {
61 .name
= "sharp-scoop",
64 .platform_data
= &collie_scoop_setup
,
66 .num_resources
= ARRAY_SIZE(collie_scoop_resources
),
67 .resource
= collie_scoop_resources
,
70 static struct scoop_pcmcia_dev collie_pcmcia_scoop
[] = {
72 .dev
= &colliescoop_device
.dev
,
73 .irq
= COLLIE_IRQ_GPIO_CF_IRQ
,
74 .cd_irq
= COLLIE_IRQ_GPIO_CF_CD
,
75 .cd_irq_str
= "PCMCIA0 CD",
79 static struct scoop_pcmcia_config collie_pcmcia_config
= {
80 .devs
= &collie_pcmcia_scoop
[0],
85 static struct mcp_plat_data collie_mcp_data
= {
86 .mccr0
= MCCR0_ADM
| MCCR0_ExtClk
,
90 #ifdef CONFIG_SHARP_LOCOMO
92 * low-level UART features.
94 struct platform_device collie_locomo_device
;
96 static void collie_uart_set_mctrl(struct uart_port
*port
, u_int mctrl
)
98 if (mctrl
& TIOCM_RTS
)
99 locomo_gpio_write(&collie_locomo_device
.dev
, LOCOMO_GPIO_RTS
, 0);
101 locomo_gpio_write(&collie_locomo_device
.dev
, LOCOMO_GPIO_RTS
, 1);
103 if (mctrl
& TIOCM_DTR
)
104 locomo_gpio_write(&collie_locomo_device
.dev
, LOCOMO_GPIO_DTR
, 0);
106 locomo_gpio_write(&collie_locomo_device
.dev
, LOCOMO_GPIO_DTR
, 1);
109 static u_int
collie_uart_get_mctrl(struct uart_port
*port
)
114 r
= locomo_gpio_read_output(&collie_locomo_device
.dev
, LOCOMO_GPIO_CTS
& LOCOMO_GPIO_DSR
);
117 if (r
& LOCOMO_GPIO_CTS
)
119 if (r
& LOCOMO_GPIO_DSR
)
125 static struct sa1100_port_fns collie_port_fns __initdata
= {
126 .set_mctrl
= collie_uart_set_mctrl
,
127 .get_mctrl
= collie_uart_get_mctrl
,
130 static int collie_uart_probe(struct locomo_dev
*dev
)
135 static int collie_uart_remove(struct locomo_dev
*dev
)
140 static struct locomo_driver collie_uart_driver
= {
142 .name
= "collie_uart",
144 .devid
= LOCOMO_DEVID_UART
,
145 .probe
= collie_uart_probe
,
146 .remove
= collie_uart_remove
,
149 static int __init
collie_uart_init(void) {
150 return locomo_driver_register(&collie_uart_driver
);
152 device_initcall(collie_uart_init
);
157 static struct resource locomo_resources
[] = {
161 .flags
= IORESOURCE_MEM
,
166 .flags
= IORESOURCE_IRQ
,
170 struct platform_device collie_locomo_device
= {
173 .num_resources
= ARRAY_SIZE(locomo_resources
),
174 .resource
= locomo_resources
,
177 static struct platform_device
*devices
[] __initdata
= {
178 &collie_locomo_device
,
182 static struct mtd_partition collie_partitions
[] = {
184 .name
= "bootloader",
187 .mask_flags
= MTD_WRITEABLE
190 .offset
= MTDPART_OFS_APPEND
,
194 .offset
= MTDPART_OFS_APPEND
,
199 static void collie_set_vpp(int vpp
)
201 write_scoop_reg(&colliescoop_device
.dev
, SCOOP_GPCR
, read_scoop_reg(&colliescoop_device
.dev
, SCOOP_GPCR
) | COLLIE_SCP_VPEN
);
203 write_scoop_reg(&colliescoop_device
.dev
, SCOOP_GPWR
, read_scoop_reg(&colliescoop_device
.dev
, SCOOP_GPWR
) | COLLIE_SCP_VPEN
);
205 write_scoop_reg(&colliescoop_device
.dev
, SCOOP_GPWR
, read_scoop_reg(&colliescoop_device
.dev
, SCOOP_GPWR
) & ~COLLIE_SCP_VPEN
);
208 static struct flash_platform_data collie_flash_data
= {
209 .map_name
= "cfi_probe",
210 .set_vpp
= collie_set_vpp
,
211 .parts
= collie_partitions
,
212 .nr_parts
= ARRAY_SIZE(collie_partitions
),
215 static struct resource collie_flash_resources
[] = {
217 .start
= SA1100_CS0_PHYS
,
218 .end
= SA1100_CS0_PHYS
+ SZ_32M
- 1,
219 .flags
= IORESOURCE_MEM
,
223 static void __init
collie_init(void)
228 GAFR
= ( GPIO_SSP_TXD
| \
229 GPIO_SSP_SCLK
| GPIO_SSP_SFRM
| GPIO_SSP_CLK
| GPIO_TIC_ACK
| \
232 GPDR
= ( GPIO_LDD8
| GPIO_LDD9
| GPIO_LDD10
| GPIO_LDD11
| GPIO_LDD12
| \
233 GPIO_LDD13
| GPIO_LDD14
| GPIO_LDD15
| GPIO_SSP_TXD
| \
234 GPIO_SSP_SCLK
| GPIO_SSP_SFRM
| GPIO_SDLC_SCLK
| \
235 GPIO_SDLC_AAF
| GPIO_UART_SCLK1
| GPIO_32_768kHz
);
239 PPDR
= ( PPC_LDD0
| PPC_LDD1
| PPC_LDD2
| PPC_LDD3
| PPC_LDD4
| PPC_LDD5
| \
240 PPC_LDD6
| PPC_LDD7
| PPC_L_PCLK
| PPC_L_LCLK
| PPC_L_FCLK
| PPC_L_BIAS
| \
241 PPC_TXD1
| PPC_TXD2
| PPC_RXD2
| PPC_TXD3
| PPC_TXD4
| PPC_SCLK
| PPC_SFRM
);
243 PSDR
= ( PPC_RXD1
| PPC_RXD2
| PPC_RXD3
| PPC_RXD4
);
245 GAFR
|= GPIO_32_768kHz
;
246 GPDR
|= GPIO_32_768kHz
;
247 TUCR
= TUCR_32_768kHz
;
249 platform_scoop_config
= &collie_pcmcia_config
;
251 ret
= platform_add_devices(devices
, ARRAY_SIZE(devices
));
253 printk(KERN_WARNING
"collie: Unable to register LoCoMo device\n");
256 sa11x0_set_flash_data(&collie_flash_data
, collie_flash_resources
,
257 ARRAY_SIZE(collie_flash_resources
));
258 sa11x0_set_mcp_data(&collie_mcp_data
);
260 sharpsl_save_param();
263 static struct map_desc collie_io_desc
[] __initdata
= {
264 { /* 32M main flash (cs0) */
265 .virtual = 0xe8000000,
266 .pfn
= __phys_to_pfn(0x00000000),
267 .length
= 0x02000000,
269 }, { /* 32M boot flash (cs1) */
270 .virtual = 0xea000000,
271 .pfn
= __phys_to_pfn(0x08000000),
272 .length
= 0x02000000,
277 static void __init
collie_map_io(void)
280 iotable_init(collie_io_desc
, ARRAY_SIZE(collie_io_desc
));
282 #ifdef CONFIG_SHARP_LOCOMO
283 sa1100_register_uart_fns(&collie_port_fns
);
285 sa1100_register_uart(0, 3);
286 sa1100_register_uart(1, 1);
289 MACHINE_START(COLLIE
, "Sharp-Collie")
290 .phys_io
= 0x80000000,
291 .io_pg_offst
= ((0xf8000000) >> 18) & 0xfffc,
292 .map_io
= collie_map_io
,
293 .init_irq
= sa1100_init_irq
,
294 .timer
= &sa1100_timer
,
295 .init_machine
= collie_init
,