arch/m68knommu/platform/5272/config.c

   1 /***************************************************************************/
   2
   3 /*
   4  *      linux/arch/m68knommu/platform/5272/config.c
   5  *
   6  *      Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
   7  *      Copyright (C) 2001-2002, SnapGear Inc. (www.snapgear.com)
   8  */
   9
  10 /***************************************************************************/
  11
  12 #include <linux/kernel.h>
  13 #include <linux/param.h>
  14 #include <linux/init.h>
  15 #include <linux/interrupt.h>
  16 #include <linux/io.h>
  17 #include <asm/machdep.h>
  18 #include <asm/coldfire.h>
  19 #include <asm/mcfsim.h>
  20 #include <asm/mcfuart.h>
  21
  22 /***************************************************************************/
  23
  24 void coldfire_reset(void);
  25
  26 extern unsigned int mcf_timervector;
  27 extern unsigned int mcf_profilevector;
  28 extern unsigned int mcf_timerlevel;
  29
  30 /***************************************************************************/
  31
  32 /*
  33  *      Some platforms need software versions of the GPIO data registers.
  34  */
  35 unsigned short ppdata;
  36 unsigned char ledbank = 0xff;
  37
  38 /***************************************************************************/
  39
  40 static struct mcf_platform_uart m5272_uart_platform[] = {
  41         {
  42                 .mapbase        = MCF_MBAR + MCFUART_BASE1,
  43                 .irq            = 73,
  44         },
  45         {
  46                 .mapbase        = MCF_MBAR + MCFUART_BASE2,
  47                 .irq            = 74,
  48         },
  49         { },
  50 };
  51
  52 static struct platform_device m5272_uart = {
  53         .name                   = "mcfuart",
  54         .id                     = 0,
  55         .dev.platform_data      = m5272_uart_platform,
  56 };
  57
  58 static struct platform_device *m5272_devices[] __initdata = {
  59         &m5272_uart,
  60 };
  61
  62 /***************************************************************************/
  63
  64 static void __init m5272_uart_init_line(int line, int irq)
  65 {
  66         u32 v;
  67
  68         if ((line >= 0) && (line < 2)) {
  69                 v = (line) ? 0x0e000000 : 0xe0000000;
  70                 writel(v, MCF_MBAR + MCFSIM_ICR2);
  71
  72                 /* Enable the output lines for the serial ports */
  73                 v = readl(MCF_MBAR + MCFSIM_PBCNT);
  74                 v = (v & ~0x000000ff) | 0x00000055;
  75                 writel(v, MCF_MBAR + MCFSIM_PBCNT);
  76
  77                 v = readl(MCF_MBAR + MCFSIM_PDCNT);
  78                 v = (v & ~0x000003fc) | 0x000002a8;
  79                 writel(v, MCF_MBAR + MCFSIM_PDCNT);
  80         }
  81 }
  82
  83 static void __init m5272_uarts_init(void)
  84 {
  85         const int nrlines = ARRAY_SIZE(m5272_uart_platform);
  86         int line;
  87
  88         for (line = 0; (line < nrlines); line++)
  89                 m5272_uart_init_line(line, m5272_uart_platform[line].irq);
  90 }
  91
  92 /***************************************************************************/
  93
  94 void mcf_disableall(void)
  95 {
  96         volatile unsigned long  *icrp;
  97
  98         icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
  99         icrp[0] = 0x88888888;
 100         icrp[1] = 0x88888888;
 101         icrp[2] = 0x88888888;
 102         icrp[3] = 0x88888888;
 103 }
 104
 105 /***************************************************************************/
 106
 107 void mcf_autovector(unsigned int vec)
 108 {
 109         /* Everything is auto-vectored on the 5272 */
 110 }
 111
 112 /***************************************************************************/
 113
 114 void mcf_settimericr(int timer, int level)
 115 {
 116         volatile unsigned long *icrp;
 117
 118         if ((timer >= 1 ) && (timer <= 4)) {
 119                 icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
 120                 *icrp = (0x8 | level) << ((4 - timer) * 4);
 121         }
 122 }
 123
 124 /***************************************************************************/
 125
 126 void __init config_BSP(char *commandp, int size)
 127 {
 128 #if defined (CONFIG_MOD5272)
 129         volatile unsigned char  *pivrp;
 130
 131         /* Set base of device vectors to be 64 */
 132         pivrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_PIVR);
 133         *pivrp = 0x40;
 134 #endif
 135
 136         mcf_disableall();
 137
 138 #if defined(CONFIG_NETtel) || defined(CONFIG_SCALES)
 139         /* Copy command line from FLASH to local buffer... */
 140         memcpy(commandp, (char *) 0xf0004000, size);
 141         commandp[size-1] = 0;
 142 #elif defined(CONFIG_MTD_KeyTechnology)
 143         /* Copy command line from FLASH to local buffer... */
 144         memcpy(commandp, (char *) 0xffe06000, size);
 145         commandp[size-1] = 0;
 146 #elif defined(CONFIG_CANCam)
 147         /* Copy command line from FLASH to local buffer... */
 148         memcpy(commandp, (char *) 0xf0010000, size);
 149         commandp[size-1] = 0;
 150 #endif
 151
 152         mcf_timervector = 69;
 153         mcf_profilevector = 70;
 154         mach_reset = coldfire_reset;
 155 }
 156
 157 /***************************************************************************/
 158
 159 static int __init init_BSP(void)
 160 {
 161         m5272_uarts_init();
 162         platform_add_devices(m5272_devices, ARRAY_SIZE(m5272_devices));
 163         return 0;
 164 }
 165
 166 arch_initcall(init_BSP);
 167
 168 /***************************************************************************/