6 # Horrible source of confusion. Die, die, die ...
10 mainmenu "Linux/MIPS Kernel Configuration"
12 menu "Machine selection"
22 bool "Alchemy processor based machines"
25 bool "Basler eXcite smart camera"
34 select SYS_HAS_CPU_RM9000
35 select SYS_SUPPORTS_32BIT_KERNEL
36 select SYS_SUPPORTS_BIG_ENDIAN
37 select SYS_SUPPORTS_KGDB
39 The eXcite is a smart camera platform manufactured by
40 Basler Vision Technologies AG.
43 bool "BCM47XX based boards"
46 select DMA_NONCOHERENT
49 select SYS_HAS_CPU_MIPS32_R1
50 select SYS_SUPPORTS_32BIT_KERNEL
51 select SYS_SUPPORTS_LITTLE_ENDIAN
53 select SSB_DRIVER_MIPS
54 select SSB_DRIVER_EXTIF
55 select SSB_PCICORE_HOSTMODE if PCI
57 select SYS_HAS_EARLY_PRINTK
60 Support for BCM47XX based boards
67 select DMA_NONCOHERENT
73 select PCI_GT64XXX_PCI0
74 select SYS_HAS_CPU_NEVADA
75 select SYS_HAS_EARLY_PRINTK
76 select SYS_SUPPORTS_32BIT_KERNEL
77 select SYS_SUPPORTS_64BIT_KERNEL
78 select SYS_SUPPORTS_LITTLE_ENDIAN
79 select GENERIC_HARDIRQS_NO__DO_IRQ
81 config MACH_DECSTATION
86 select CPU_DADDI_WORKAROUNDS if 64BIT
87 select CPU_R4000_WORKAROUNDS if 64BIT
88 select CPU_R4400_WORKAROUNDS if 64BIT
89 select DMA_NONCOHERENT
92 select SYS_HAS_CPU_R3000
93 select SYS_HAS_CPU_R4X00
94 select SYS_SUPPORTS_32BIT_KERNEL
95 select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
96 select SYS_SUPPORTS_LITTLE_ENDIAN
97 select SYS_SUPPORTS_128HZ
98 select SYS_SUPPORTS_256HZ
99 select SYS_SUPPORTS_1024HZ
101 This enables support for DEC's MIPS based workstations. For details
102 see the Linux/MIPS FAQ on <http://www.linux-mips.org/> and the
103 DECstation porting pages on <http://decstation.unix-ag.org/>.
105 If you have one of the following DECstation Models you definitely
106 want to choose R4xx0 for the CPU Type:
113 otherwise choose R3000.
116 bool "Jazz family of machines"
119 select ARCH_MAY_HAVE_PC_FDC
122 select DEFAULT_SGI_PARTITION if CPU_BIG_ENDIAN
123 select GENERIC_ISA_DMA
128 select SYS_HAS_CPU_R4X00
129 select SYS_SUPPORTS_32BIT_KERNEL
130 select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
131 select SYS_SUPPORTS_100HZ
132 select GENERIC_HARDIRQS_NO__DO_IRQ
134 This a family of machines based on the MIPS R4030 chipset which was
135 used by several vendors to build RISC/os and Windows NT workstations.
136 Members include the Acer PICA, MIPS Magnum 4000, MIPS Millenium and
137 Olivetti M700-10 workstations.
140 bool "LASAT Networks platforms"
143 select DMA_NONCOHERENT
144 select SYS_HAS_EARLY_PRINTK
147 select PCI_GT64XXX_PCI0
149 select R5000_CPU_SCACHE
150 select SYS_HAS_CPU_R5000
151 select SYS_SUPPORTS_32BIT_KERNEL
152 select SYS_SUPPORTS_64BIT_KERNEL if BROKEN
153 select SYS_SUPPORTS_LITTLE_ENDIAN
154 select GENERIC_HARDIRQS_NO__DO_IRQ
157 bool "Lemote Fulong mini-PC"
158 select ARCH_SPARSEMEM_ENABLE
161 select SYS_HAS_CPU_LOONGSON2
162 select DMA_NONCOHERENT
165 select HAVE_STD_PC_SERIAL_PORT
170 select SYS_SUPPORTS_32BIT_KERNEL
171 select SYS_SUPPORTS_64BIT_KERNEL
172 select SYS_SUPPORTS_LITTLE_ENDIAN
173 select SYS_SUPPORTS_HIGHMEM
174 select SYS_HAS_EARLY_PRINTK
175 select GENERIC_HARDIRQS_NO__DO_IRQ
176 select GENERIC_ISA_DMA_SUPPORT_BROKEN
179 Lemote Fulong mini-PC board based on the Chinese Loongson-2E CPU and
183 bool "MIPS Atlas board"
188 select DMA_NONCOHERENT
189 select SYS_HAS_EARLY_PRINTK
192 select MIPS_BOARDS_GEN
194 select PCI_GT64XXX_PCI0
196 select RM7000_CPU_SCACHE
198 select SYS_HAS_CPU_MIPS32_R1
199 select SYS_HAS_CPU_MIPS32_R2
200 select SYS_HAS_CPU_MIPS64_R1
201 select SYS_HAS_CPU_NEVADA
202 select SYS_HAS_CPU_RM7000
203 select SYS_SUPPORTS_32BIT_KERNEL
204 select SYS_SUPPORTS_64BIT_KERNEL
205 select SYS_SUPPORTS_BIG_ENDIAN
206 select SYS_SUPPORTS_LITTLE_ENDIAN
207 select SYS_SUPPORTS_MULTITHREADING if EXPERIMENTAL
208 select SYS_SUPPORTS_SMARTMIPS
209 select GENERIC_HARDIRQS_NO__DO_IRQ
211 This enables support for the MIPS Technologies Atlas evaluation
215 bool "MIPS Malta board"
216 select ARCH_MAY_HAVE_PC_FDC
221 select DMA_NONCOHERENT
222 select GENERIC_ISA_DMA
227 select MIPS_BOARDS_GEN
229 select MIPS_CPU_SCACHE
230 select PCI_GT64XXX_PCI0
233 select SYS_HAS_CPU_MIPS32_R1
234 select SYS_HAS_CPU_MIPS32_R2
235 select SYS_HAS_CPU_MIPS64_R1
236 select SYS_HAS_CPU_NEVADA
237 select SYS_HAS_CPU_RM7000
238 select SYS_HAS_EARLY_PRINTK
239 select SYS_SUPPORTS_32BIT_KERNEL
240 select SYS_SUPPORTS_64BIT_KERNEL
241 select SYS_SUPPORTS_BIG_ENDIAN
242 select SYS_SUPPORTS_LITTLE_ENDIAN
243 select SYS_SUPPORTS_MULTITHREADING
244 select SYS_SUPPORTS_SMARTMIPS
246 This enables support for the MIPS Technologies Malta evaluation
250 bool "MIPS SEAD board"
254 select DMA_NONCOHERENT
255 select SYS_HAS_EARLY_PRINTK
256 select MIPS_BOARDS_GEN
257 select SYS_HAS_CPU_MIPS32_R1
258 select SYS_HAS_CPU_MIPS32_R2
259 select SYS_HAS_CPU_MIPS64_R1
260 select SYS_SUPPORTS_32BIT_KERNEL
261 select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
262 select SYS_SUPPORTS_BIG_ENDIAN
263 select SYS_SUPPORTS_LITTLE_ENDIAN
264 select SYS_SUPPORTS_SMARTMIPS
266 This enables support for the MIPS Technologies SEAD evaluation
270 bool 'MIPS simulator (MIPSsim)'
273 select DMA_NONCOHERENT
274 select SYS_HAS_EARLY_PRINTK
277 select SYS_HAS_CPU_MIPS32_R1
278 select SYS_HAS_CPU_MIPS32_R2
279 select SYS_HAS_EARLY_PRINTK
280 select SYS_SUPPORTS_32BIT_KERNEL
281 select SYS_SUPPORTS_BIG_ENDIAN
282 select SYS_SUPPORTS_MULTITHREADING
283 select SYS_SUPPORTS_LITTLE_ENDIAN
285 This option enables support for MIPS Technologies MIPSsim software
289 bool "NEC EMMA2RH Mark-eins"
292 select DMA_NONCOHERENT
296 select SYS_SUPPORTS_32BIT_KERNEL
297 select SYS_SUPPORTS_BIG_ENDIAN
298 select SYS_SUPPORTS_LITTLE_ENDIAN
299 select SYS_HAS_CPU_R5000
301 This enables support for the R5432-based NEC Mark-eins
302 boards with R5500 CPU.
305 bool "NEC VR4100 series based machines"
308 select SYS_HAS_CPU_VR41XX
309 select GENERIC_HARDIRQS_NO__DO_IRQ
312 bool "Philips PNX8550 based JBS board"
314 select SYS_SUPPORTS_LITTLE_ENDIAN
316 config PNX8550_STB810
317 bool "Philips PNX8550 based STB810 board"
319 select SYS_SUPPORTS_LITTLE_ENDIAN
322 bool "PMC-Sierra MSP chipsets"
323 depends on EXPERIMENTAL
324 select DMA_NONCOHERENT
326 select NO_EXCEPT_FILL
328 select SYS_HAS_CPU_MIPS32_R1
329 select SYS_HAS_CPU_MIPS32_R2
330 select SYS_SUPPORTS_32BIT_KERNEL
331 select SYS_SUPPORTS_BIG_ENDIAN
332 select SYS_SUPPORTS_KGDB
335 select SERIAL_8250_CONSOLE
337 This adds support for the PMC-Sierra family of Multi-Service
338 Processor System-On-A-Chips. These parts include a number
339 of integrated peripherals, interfaces and DSPs in addition to
340 a variety of MIPS cores.
343 bool "PMC-Sierra Yosemite eval board"
352 select SYS_HAS_CPU_RM9000
353 select SYS_HAS_EARLY_PRINTK
354 select SYS_SUPPORTS_32BIT_KERNEL
355 select SYS_SUPPORTS_64BIT_KERNEL
356 select SYS_SUPPORTS_BIG_ENDIAN
357 select SYS_SUPPORTS_HIGHMEM
358 select SYS_SUPPORTS_KGDB
359 select SYS_SUPPORTS_SMP
361 Yosemite is an evaluation board for the RM9000x2 processor
362 manufactured by PMC-Sierra.
365 bool "SGI IP22 (Indy/Indigo2)"
371 select DEFAULT_SGI_PARTITION
372 select DMA_NONCOHERENT
376 select IP22_CPU_SCACHE
378 select GENERIC_ISA_DMA_SUPPORT_BROKEN
379 select SGI_HAS_DS1286
381 select SGI_HAS_INDYDOG
386 select SYS_HAS_CPU_R4X00
387 select SYS_HAS_CPU_R5000
388 select SYS_HAS_EARLY_PRINTK
389 select SYS_SUPPORTS_32BIT_KERNEL
390 select SYS_SUPPORTS_64BIT_KERNEL
391 select SYS_SUPPORTS_BIG_ENDIAN
393 This are the SGI Indy, Challenge S and Indigo2, as well as certain
394 OEM variants like the Tandem CMN B006S. To compile a Linux kernel
395 that runs on these, say Y here.
398 bool "SGI IP27 (Origin200/2000)"
402 select DEFAULT_SGI_PARTITION
404 select SYS_HAS_EARLY_PRINTK
406 select NR_CPUS_DEFAULT_64
407 select SYS_HAS_CPU_R10000
408 select SYS_SUPPORTS_64BIT_KERNEL
409 select SYS_SUPPORTS_BIG_ENDIAN
410 select SYS_SUPPORTS_KGDB
411 select SYS_SUPPORTS_NUMA
412 select SYS_SUPPORTS_SMP
413 select GENERIC_HARDIRQS_NO__DO_IRQ
415 This are the SGI Origin 200, Origin 2000 and Onyx 2 Graphics
416 workstations. To compile a Linux kernel that runs on these, say Y
420 bool "SGI IP28 (Indigo2 R10k) (EXPERIMENTAL)"
421 depends on EXPERIMENTAL
427 select DEFAULT_SGI_PARTITION
428 select DMA_NONCOHERENT
429 select GENERIC_ISA_DMA_SUPPORT_BROKEN
434 select SGI_HAS_DS1286
436 select SGI_HAS_INDYDOG
441 select SYS_HAS_CPU_R10000
442 select SYS_HAS_EARLY_PRINTK
443 select SYS_SUPPORTS_64BIT_KERNEL
444 select SYS_SUPPORTS_BIG_ENDIAN
446 This is the SGI Indigo2 with R10000 processor. To compile a Linux
447 kernel that runs on these, say Y here.
456 select DMA_NONCOHERENT
459 select R5000_CPU_SCACHE
460 select RM7000_CPU_SCACHE
461 select SYS_HAS_CPU_R5000
462 select SYS_HAS_CPU_R10000 if BROKEN
463 select SYS_HAS_CPU_RM7000
464 select SYS_HAS_CPU_NEVADA
465 select SYS_SUPPORTS_64BIT_KERNEL
466 select SYS_SUPPORTS_BIG_ENDIAN
468 If you want this kernel to run on SGI O2 workstation, say Y here.
471 bool "Sibyte BCM91120C-CRhine"
472 depends on EXPERIMENTAL
475 select SIBYTE_BCM1120
477 select SYS_HAS_CPU_SB1
478 select SYS_SUPPORTS_BIG_ENDIAN
479 select SYS_SUPPORTS_LITTLE_ENDIAN
482 bool "Sibyte BCM91120x-Carmel"
483 depends on EXPERIMENTAL
486 select SIBYTE_BCM1120
488 select SYS_HAS_CPU_SB1
489 select SYS_SUPPORTS_BIG_ENDIAN
490 select SYS_SUPPORTS_LITTLE_ENDIAN
493 bool "Sibyte BCM91125C-CRhone"
494 depends on EXPERIMENTAL
497 select SIBYTE_BCM1125
499 select SYS_HAS_CPU_SB1
500 select SYS_SUPPORTS_BIG_ENDIAN
501 select SYS_SUPPORTS_HIGHMEM
502 select SYS_SUPPORTS_LITTLE_ENDIAN
505 bool "Sibyte BCM91125E-Rhone"
506 depends on EXPERIMENTAL
509 select SIBYTE_BCM1125H
511 select SYS_HAS_CPU_SB1
512 select SYS_SUPPORTS_BIG_ENDIAN
513 select SYS_SUPPORTS_LITTLE_ENDIAN
516 bool "Sibyte BCM91250A-SWARM"
519 select NR_CPUS_DEFAULT_2
522 select SYS_HAS_CPU_SB1
523 select SYS_SUPPORTS_BIG_ENDIAN
524 select SYS_SUPPORTS_HIGHMEM
525 select SYS_SUPPORTS_KGDB
526 select SYS_SUPPORTS_LITTLE_ENDIAN
527 select ZONE_DMA32 if 64BIT
529 config SIBYTE_LITTLESUR
530 bool "Sibyte BCM91250C2-LittleSur"
531 depends on EXPERIMENTAL
534 select NR_CPUS_DEFAULT_2
537 select SYS_HAS_CPU_SB1
538 select SYS_SUPPORTS_BIG_ENDIAN
539 select SYS_SUPPORTS_HIGHMEM
540 select SYS_SUPPORTS_LITTLE_ENDIAN
542 config SIBYTE_SENTOSA
543 bool "Sibyte BCM91250E-Sentosa"
544 depends on EXPERIMENTAL
547 select NR_CPUS_DEFAULT_2
550 select SYS_HAS_CPU_SB1
551 select SYS_SUPPORTS_BIG_ENDIAN
552 select SYS_SUPPORTS_LITTLE_ENDIAN
555 bool "Sibyte BCM91480B-BigSur"
558 select NR_CPUS_DEFAULT_4
559 select SIBYTE_BCM1x80
561 select SYS_HAS_CPU_SB1
562 select SYS_SUPPORTS_BIG_ENDIAN
563 select SYS_SUPPORTS_HIGHMEM
564 select SYS_SUPPORTS_LITTLE_ENDIAN
565 select ZONE_DMA32 if 64BIT
568 bool "SNI RM200/300/400"
569 select ARC if CPU_LITTLE_ENDIAN
570 select ARC32 if CPU_LITTLE_ENDIAN
571 select SNIPROM if CPU_BIG_ENDIAN
572 select ARCH_MAY_HAVE_PC_FDC
576 select DEFAULT_SGI_PARTITION if CPU_BIG_ENDIAN
577 select DMA_NONCOHERENT
578 select GENERIC_ISA_DMA
585 select SWAP_IO_SPACE if CPU_BIG_ENDIAN
586 select SYS_HAS_CPU_R4X00
587 select SYS_HAS_CPU_R5000
588 select SYS_HAS_CPU_R10000
589 select R5000_CPU_SCACHE
590 select SYS_HAS_EARLY_PRINTK
591 select SYS_SUPPORTS_32BIT_KERNEL
592 select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
593 select SYS_SUPPORTS_BIG_ENDIAN
594 select SYS_SUPPORTS_HIGHMEM
595 select SYS_SUPPORTS_LITTLE_ENDIAN
597 The SNI RM200/300/400 are MIPS-based machines manufactured by
598 Siemens Nixdorf Informationssysteme (SNI), parent company of Pyramid
599 Technology and now in turn merged with Fujitsu. Say Y here to
600 support this machine type.
602 config TOSHIBA_JMR3927
603 bool "Toshiba JMR-TX3927 board"
605 select DMA_NONCOHERENT
610 select SYS_HAS_CPU_TX39XX
611 select SYS_SUPPORTS_32BIT_KERNEL
612 select SYS_SUPPORTS_LITTLE_ENDIAN
613 select SYS_SUPPORTS_BIG_ENDIAN
614 select GENERIC_HARDIRQS_NO__DO_IRQ
616 config TOSHIBA_RBTX4927
617 bool "Toshiba RBTX49[23]7 board"
621 select DMA_NONCOHERENT
622 select HAS_TXX9_SERIAL
626 select I8259 if TOSHIBA_FPCIB0
628 select SYS_HAS_CPU_TX49XX
629 select SYS_SUPPORTS_32BIT_KERNEL
630 select SYS_SUPPORTS_64BIT_KERNEL
631 select SYS_SUPPORTS_LITTLE_ENDIAN
632 select SYS_SUPPORTS_BIG_ENDIAN
633 select SYS_SUPPORTS_KGDB
634 select GENERIC_HARDIRQS_NO__DO_IRQ
636 This Toshiba board is based on the TX4927 processor. Say Y here to
637 support this machine type
639 config TOSHIBA_RBTX4938
640 bool "Toshiba RBTX4938 board"
644 select DMA_NONCOHERENT
645 select HAS_TXX9_SERIAL
650 select SYS_HAS_CPU_TX49XX
651 select SYS_SUPPORTS_32BIT_KERNEL
652 select SYS_SUPPORTS_LITTLE_ENDIAN
653 select SYS_SUPPORTS_BIG_ENDIAN
654 select SYS_SUPPORTS_KGDB
655 select GENERIC_HARDIRQS_NO__DO_IRQ
658 This Toshiba board is based on the TX4938 processor. Say Y here to
659 support this machine type
662 bool "Wind River PPMC board"
667 select DMA_NONCOHERENT
669 select PCI_GT64XXX_PCI0
671 select SYS_HAS_CPU_MIPS32_R1
672 select SYS_HAS_CPU_MIPS32_R2
673 select SYS_HAS_CPU_MIPS64_R1
674 select SYS_HAS_CPU_NEVADA
675 select SYS_HAS_CPU_RM7000
676 select SYS_SUPPORTS_32BIT_KERNEL
677 select SYS_SUPPORTS_64BIT_KERNEL
678 select SYS_SUPPORTS_BIG_ENDIAN
679 select SYS_SUPPORTS_LITTLE_ENDIAN
681 This enables support for the Wind River MIPS32 4KC PPMC evaluation
682 board, which is based on GT64120 bridge chip.
686 source "arch/mips/au1000/Kconfig"
687 source "arch/mips/basler/excite/Kconfig"
688 source "arch/mips/jazz/Kconfig"
689 source "arch/mips/lasat/Kconfig"
690 source "arch/mips/pmc-sierra/Kconfig"
691 source "arch/mips/sgi-ip27/Kconfig"
692 source "arch/mips/sibyte/Kconfig"
693 source "arch/mips/tx4927/Kconfig"
694 source "arch/mips/tx4938/Kconfig"
695 source "arch/mips/vr41xx/Kconfig"
699 config GENERIC_LOCKBREAK
702 depends on SMP && PREEMPT
704 config RWSEM_GENERIC_SPINLOCK
708 config RWSEM_XCHGADD_ALGORITHM
711 config ARCH_HAS_ILOG2_U32
715 config ARCH_HAS_ILOG2_U64
719 config ARCH_SUPPORTS_OPROFILE
721 default y if !MIPS_MT_SMTC
723 config GENERIC_FIND_NEXT_BIT
727 config GENERIC_HWEIGHT
731 config GENERIC_CALIBRATE_DELAY
735 config GENERIC_CLOCKEVENTS
743 config GENERIC_CMOS_UPDATE
747 config SCHED_NO_NO_OMIT_FRAME_POINTER
751 config GENERIC_HARDIRQS_NO__DO_IRQ
756 # Select some configuration options automatically based on user selections.
761 config ARCH_MAY_HAVE_PC_FDC
800 config DMA_NONCOHERENT
802 select DMA_NEED_PCI_MAP_STATE
804 config DMA_NEED_PCI_MAP_STATE
808 bool "Early printk" if EMBEDDED && DEBUG_KERNEL
809 depends on SYS_HAS_EARLY_PRINTK
812 This option enables special console drivers which allow the kernel
813 to print messages very early in the bootup process.
815 This is useful for kernel debugging when your machine crashes very
816 early before the console code is initialized. For normal operation,
817 it is not recommended because it looks ugly on some machines and
818 doesn't cooperate with an X server. You should normally say N here,
819 unless you want to debug such a crash.
821 config SYS_HAS_EARLY_PRINTK
840 config MIPS_DISABLE_OBSOLETE_IDE
846 config GENERIC_ISA_DMA
848 select ZONE_DMA if GENERIC_ISA_DMA_SUPPORT_BROKEN=n
850 config GENERIC_ISA_DMA_SUPPORT_BROKEN
852 select GENERIC_ISA_DMA
858 # Endianess selection. Sufficiently obscure so many users don't know what to
859 # answer,so we try hard to limit the available choices. Also the use of a
860 # choice statement should be more obvious to the user.
863 prompt "Endianess selection"
865 Some MIPS machines can be configured for either little or big endian
866 byte order. These modes require different kernels and a different
867 Linux distribution. In general there is one preferred byteorder for a
868 particular system but some systems are just as commonly used in the
869 one or the other endianness.
871 config CPU_BIG_ENDIAN
873 depends on SYS_SUPPORTS_BIG_ENDIAN
875 config CPU_LITTLE_ENDIAN
877 depends on SYS_SUPPORTS_LITTLE_ENDIAN
882 config SYS_SUPPORTS_APM_EMULATION
885 config SYS_SUPPORTS_BIG_ENDIAN
888 config SYS_SUPPORTS_LITTLE_ENDIAN
912 config MIPS_BOARDS_GEN
915 config PCI_GT64XXX_PCI0
918 config NO_EXCEPT_FILL
923 select HAS_TXX9_SERIAL
935 select DMA_NONCOHERENT
937 select SYS_HAS_CPU_MIPS32_R1
938 select SYS_HAS_EARLY_PRINTK
939 select SYS_SUPPORTS_32BIT_KERNEL
940 select GENERIC_HARDIRQS_NO__DO_IRQ
941 select SYS_SUPPORTS_KGDB
955 config SGI_HAS_DS1286
958 config SGI_HAS_INDYDOG
973 config DEFAULT_SGI_PARTITION
985 config MIPS_L1_CACHE_SHIFT
987 default "4" if MACH_DECSTATION
988 default "7" if SGI_IP27 || SGI_IP28 || SNI_RM
989 default "4" if PMC_MSP4200_EVAL
992 config HAVE_STD_PC_SERIAL_PORT
996 bool "ARC console support"
997 depends on SGI_IP22 || SGI_IP28 || (SNI_RM && CPU_LITTLE_ENDIAN)
1001 depends on MACH_JAZZ || SNI_RM || SGI_IP32
1006 depends on MACH_JAZZ || SNI_RM || SGI_IP22 || SGI_IP28 || SGI_IP32
1015 menu "CPU selection"
1021 config CPU_LOONGSON2
1023 depends on SYS_HAS_CPU_LOONGSON2
1024 select CPU_SUPPORTS_32BIT_KERNEL
1025 select CPU_SUPPORTS_64BIT_KERNEL
1026 select CPU_SUPPORTS_HIGHMEM
1028 The Loongson 2E processor implements the MIPS III instruction set
1029 with many extensions.
1031 config CPU_MIPS32_R1
1032 bool "MIPS32 Release 1"
1033 depends on SYS_HAS_CPU_MIPS32_R1
1035 select CPU_HAS_PREFETCH
1036 select CPU_SUPPORTS_32BIT_KERNEL
1037 select CPU_SUPPORTS_HIGHMEM
1039 Choose this option to build a kernel for release 1 or later of the
1040 MIPS32 architecture. Most modern embedded systems with a 32-bit
1041 MIPS processor are based on a MIPS32 processor. If you know the
1042 specific type of processor in your system, choose those that one
1043 otherwise CPU_MIPS32_R1 is a safe bet for any MIPS32 system.
1044 Release 2 of the MIPS32 architecture is available since several
1045 years so chances are you even have a MIPS32 Release 2 processor
1046 in which case you should choose CPU_MIPS32_R2 instead for better
1049 config CPU_MIPS32_R2
1050 bool "MIPS32 Release 2"
1051 depends on SYS_HAS_CPU_MIPS32_R2
1053 select CPU_HAS_PREFETCH
1054 select CPU_SUPPORTS_32BIT_KERNEL
1055 select CPU_SUPPORTS_HIGHMEM
1057 Choose this option to build a kernel for release 2 or later of the
1058 MIPS32 architecture. Most modern embedded systems with a 32-bit
1059 MIPS processor are based on a MIPS32 processor. If you know the
1060 specific type of processor in your system, choose those that one
1061 otherwise CPU_MIPS32_R1 is a safe bet for any MIPS32 system.
1063 config CPU_MIPS64_R1
1064 bool "MIPS64 Release 1"
1065 depends on SYS_HAS_CPU_MIPS64_R1
1067 select CPU_HAS_PREFETCH
1068 select CPU_SUPPORTS_32BIT_KERNEL
1069 select CPU_SUPPORTS_64BIT_KERNEL
1070 select CPU_SUPPORTS_HIGHMEM
1072 Choose this option to build a kernel for release 1 or later of the
1073 MIPS64 architecture. Many modern embedded systems with a 64-bit
1074 MIPS processor are based on a MIPS64 processor. If you know the
1075 specific type of processor in your system, choose those that one
1076 otherwise CPU_MIPS64_R1 is a safe bet for any MIPS64 system.
1077 Release 2 of the MIPS64 architecture is available since several
1078 years so chances are you even have a MIPS64 Release 2 processor
1079 in which case you should choose CPU_MIPS64_R2 instead for better
1082 config CPU_MIPS64_R2
1083 bool "MIPS64 Release 2"
1084 depends on SYS_HAS_CPU_MIPS64_R2
1086 select CPU_HAS_PREFETCH
1087 select CPU_SUPPORTS_32BIT_KERNEL
1088 select CPU_SUPPORTS_64BIT_KERNEL
1089 select CPU_SUPPORTS_HIGHMEM
1091 Choose this option to build a kernel for release 2 or later of the
1092 MIPS64 architecture. Many modern embedded systems with a 64-bit
1093 MIPS processor are based on a MIPS64 processor. If you know the
1094 specific type of processor in your system, choose those that one
1095 otherwise CPU_MIPS64_R1 is a safe bet for any MIPS64 system.
1099 depends on SYS_HAS_CPU_R3000
1101 select CPU_SUPPORTS_32BIT_KERNEL
1102 select CPU_SUPPORTS_HIGHMEM
1104 Please make sure to pick the right CPU type. Linux/MIPS is not
1105 designed to be generic, i.e. Kernels compiled for R3000 CPUs will
1106 *not* work on R4000 machines and vice versa. However, since most
1107 of the supported machines have an R4000 (or similar) CPU, R4x00
1108 might be a safe bet. If the resulting kernel does not work,
1109 try to recompile with R3000.
1113 depends on SYS_HAS_CPU_TX39XX
1114 select CPU_SUPPORTS_32BIT_KERNEL
1118 depends on SYS_HAS_CPU_VR41XX
1119 select CPU_SUPPORTS_32BIT_KERNEL
1120 select CPU_SUPPORTS_64BIT_KERNEL
1122 The options selects support for the NEC VR4100 series of processors.
1123 Only choose this option if you have one of these processors as a
1124 kernel built with this option will not run on any other type of
1125 processor or vice versa.
1129 depends on SYS_HAS_CPU_R4300
1131 select CPU_SUPPORTS_32BIT_KERNEL
1132 select CPU_SUPPORTS_64BIT_KERNEL
1134 MIPS Technologies R4300-series processors.
1138 depends on SYS_HAS_CPU_R4X00
1140 select CPU_SUPPORTS_32BIT_KERNEL
1141 select CPU_SUPPORTS_64BIT_KERNEL
1143 MIPS Technologies R4000-series processors other than 4300, including
1144 the R4000, R4400, R4600, and 4700.
1148 depends on SYS_HAS_CPU_TX49XX
1150 select CPU_HAS_PREFETCH
1151 select CPU_SUPPORTS_32BIT_KERNEL
1152 select CPU_SUPPORTS_64BIT_KERNEL
1156 depends on SYS_HAS_CPU_R5000
1158 select CPU_SUPPORTS_32BIT_KERNEL
1159 select CPU_SUPPORTS_64BIT_KERNEL
1161 MIPS Technologies R5000-series processors other than the Nevada.
1165 depends on SYS_HAS_CPU_R5432
1167 select CPU_SUPPORTS_32BIT_KERNEL
1168 select CPU_SUPPORTS_64BIT_KERNEL
1172 depends on EXPERIMENTAL
1174 depends on SYS_HAS_CPU_R6000
1175 select CPU_SUPPORTS_32BIT_KERNEL
1177 MIPS Technologies R6000 and R6000A series processors. Note these
1178 processors are extremely rare and the support for them is incomplete.
1182 depends on SYS_HAS_CPU_NEVADA
1184 select CPU_SUPPORTS_32BIT_KERNEL
1185 select CPU_SUPPORTS_64BIT_KERNEL
1187 QED / PMC-Sierra RM52xx-series ("Nevada") processors.
1191 depends on EXPERIMENTAL
1192 depends on SYS_HAS_CPU_R8000
1194 select CPU_HAS_PREFETCH
1195 select CPU_SUPPORTS_64BIT_KERNEL
1197 MIPS Technologies R8000 processors. Note these processors are
1198 uncommon and the support for them is incomplete.
1202 depends on SYS_HAS_CPU_R10000
1204 select CPU_HAS_PREFETCH
1205 select CPU_SUPPORTS_32BIT_KERNEL
1206 select CPU_SUPPORTS_64BIT_KERNEL
1207 select CPU_SUPPORTS_HIGHMEM
1209 MIPS Technologies R10000-series processors.
1213 depends on SYS_HAS_CPU_RM7000
1215 select CPU_HAS_PREFETCH
1216 select CPU_SUPPORTS_32BIT_KERNEL
1217 select CPU_SUPPORTS_64BIT_KERNEL
1218 select CPU_SUPPORTS_HIGHMEM
1222 depends on SYS_HAS_CPU_RM9000
1224 select CPU_HAS_PREFETCH
1225 select CPU_SUPPORTS_32BIT_KERNEL
1226 select CPU_SUPPORTS_64BIT_KERNEL
1227 select CPU_SUPPORTS_HIGHMEM
1228 select WEAK_ORDERING
1232 depends on SYS_HAS_CPU_SB1
1234 select CPU_SUPPORTS_32BIT_KERNEL
1235 select CPU_SUPPORTS_64BIT_KERNEL
1236 select CPU_SUPPORTS_HIGHMEM
1237 select WEAK_ORDERING
1241 config SYS_HAS_CPU_LOONGSON2
1244 config SYS_HAS_CPU_MIPS32_R1
1247 config SYS_HAS_CPU_MIPS32_R2
1250 config SYS_HAS_CPU_MIPS64_R1
1253 config SYS_HAS_CPU_MIPS64_R2
1256 config SYS_HAS_CPU_R3000
1259 config SYS_HAS_CPU_TX39XX
1262 config SYS_HAS_CPU_VR41XX
1265 config SYS_HAS_CPU_R4300
1268 config SYS_HAS_CPU_R4X00
1271 config SYS_HAS_CPU_TX49XX
1274 config SYS_HAS_CPU_R5000
1277 config SYS_HAS_CPU_R5432
1280 config SYS_HAS_CPU_R6000
1283 config SYS_HAS_CPU_NEVADA
1286 config SYS_HAS_CPU_R8000
1289 config SYS_HAS_CPU_R10000
1292 config SYS_HAS_CPU_RM7000
1295 config SYS_HAS_CPU_RM9000
1298 config SYS_HAS_CPU_SB1
1302 # CPU may reorder R->R, R->W, W->R, W->W
1303 # Reordering beyond LL and SC is handled in WEAK_REORDERING_BEYOND_LLSC
1305 config WEAK_ORDERING
1309 # CPU may reorder reads and writes beyond LL/SC
1310 # CPU may reorder R->LL, R->LL, W->LL, W->LL, R->SC, R->SC, W->SC, W->SC
1312 config WEAK_REORDERING_BEYOND_LLSC
1317 # These two indicate any level of the MIPS32 and MIPS64 architecture
1321 default y if CPU_MIPS32_R1 || CPU_MIPS32_R2
1325 default y if CPU_MIPS64_R1 || CPU_MIPS64_R2
1328 # These two indicate the revision of the architecture, either Release 1 or Release 2
1332 default y if CPU_MIPS32_R1 || CPU_MIPS64_R1
1336 default y if CPU_MIPS32_R2 || CPU_MIPS64_R2
1338 config SYS_SUPPORTS_32BIT_KERNEL
1340 config SYS_SUPPORTS_64BIT_KERNEL
1342 config CPU_SUPPORTS_32BIT_KERNEL
1344 config CPU_SUPPORTS_64BIT_KERNEL
1351 prompt "Kernel code model"
1353 You should only select this option if you have a workload that
1354 actually benefits from 64-bit processing or if your machine has
1355 large memory. You will only be presented a single option in this
1356 menu if your system does not support both 32-bit and 64-bit kernels.
1359 bool "32-bit kernel"
1360 depends on CPU_SUPPORTS_32BIT_KERNEL && SYS_SUPPORTS_32BIT_KERNEL
1363 Select this option if you want to build a 32-bit kernel.
1365 bool "64-bit kernel"
1366 depends on CPU_SUPPORTS_64BIT_KERNEL && SYS_SUPPORTS_64BIT_KERNEL
1368 Select this option if you want to build a 64-bit kernel.
1373 prompt "Kernel page size"
1374 default PAGE_SIZE_4KB
1376 config PAGE_SIZE_4KB
1379 This option select the standard 4kB Linux page size. On some
1380 R3000-family processors this is the only available page size. Using
1381 4kB page size will minimize memory consumption and is therefore
1382 recommended for low memory systems.
1384 config PAGE_SIZE_8KB
1386 depends on EXPERIMENTAL && CPU_R8000
1388 Using 8kB page size will result in higher performance kernel at
1389 the price of higher memory consumption. This option is available
1390 only on the R8000 processor. Not that at the time of this writing
1391 this option is still high experimental; there are also issues with
1392 compatibility of user applications.
1394 config PAGE_SIZE_16KB
1396 depends on !CPU_R3000 && !CPU_TX39XX
1398 Using 16kB page size will result in higher performance kernel at
1399 the price of higher memory consumption. This option is available on
1400 all non-R3000 family processors. Note that you will need a suitable
1401 Linux distribution to support this.
1403 config PAGE_SIZE_64KB
1405 depends on EXPERIMENTAL && !CPU_R3000 && !CPU_TX39XX
1407 Using 64kB page size will result in higher performance kernel at
1408 the price of higher memory consumption. This option is available on
1409 all non-R3000 family processor. Not that at the time of this
1410 writing this option is still high experimental.
1417 config IP22_CPU_SCACHE
1422 # Support for a MIPS32 / MIPS64 style S-caches
1424 config MIPS_CPU_SCACHE
1428 config R5000_CPU_SCACHE
1432 config RM7000_CPU_SCACHE
1436 config SIBYTE_DMA_PAGEOPS
1437 bool "Use DMA to clear/copy pages"
1440 Instead of using the CPU to zero and copy pages, use a Data Mover
1441 channel. These DMA channels are otherwise unused by the standard
1442 SiByte Linux port. Seems to give a small performance benefit.
1444 config CPU_HAS_PREFETCH
1448 prompt "MIPS MT options"
1450 config MIPS_MT_DISABLED
1451 bool "Disable multithreading support."
1453 Use this option if your workload can't take advantage of
1454 MIPS hardware multithreading support. On systems that don't have
1455 the option of an MT-enabled processor this option will be the only
1456 option in this menu.
1459 bool "Use 1 TC on each available VPE for SMP"
1460 depends on SYS_SUPPORTS_MULTITHREADING
1461 select CPU_MIPSR2_IRQ_VI
1462 select CPU_MIPSR2_IRQ_EI
1464 select NR_CPUS_DEFAULT_2
1466 select SYS_SUPPORTS_SCHED_SMT if SMP
1467 select SYS_SUPPORTS_SMP
1470 This is a kernel model which is also known a VSMP or lately
1471 has been marketesed into SMVP.
1474 bool "SMTC: Use all TCs on all VPEs for SMP"
1475 depends on CPU_MIPS32_R2
1476 #depends on CPU_MIPS64_R2 # once there is hardware ...
1477 depends on SYS_SUPPORTS_MULTITHREADING
1478 select GENERIC_CLOCKEVENTS_BROADCAST
1479 select CPU_MIPSR2_IRQ_VI
1480 select CPU_MIPSR2_IRQ_EI
1482 select NR_CPUS_DEFAULT_8
1484 select SYS_SUPPORTS_SMP
1487 This is a kernel model which is known a SMTC or lately has been
1488 marketesed into SMVP.
1496 bool "SMT (multithreading) scheduler support"
1497 depends on SYS_SUPPORTS_SCHED_SMT
1500 SMT scheduler support improves the CPU scheduler's decision making
1501 when dealing with MIPS MT enabled cores at a cost of slightly
1502 increased overhead in some places. If unsure say N here.
1504 config SYS_SUPPORTS_SCHED_SMT
1508 config SYS_SUPPORTS_MULTITHREADING
1511 config MIPS_MT_FPAFF
1512 bool "Dynamic FPU affinity for FP-intensive threads"
1514 depends on MIPS_MT_SMP || MIPS_MT_SMTC
1516 config MIPS_VPE_LOADER
1517 bool "VPE loader support."
1518 depends on SYS_SUPPORTS_MULTITHREADING
1519 select CPU_MIPSR2_IRQ_VI
1520 select CPU_MIPSR2_IRQ_EI
1523 Includes a loader for loading an elf relocatable object
1524 onto another VPE and running it.
1526 config MIPS_MT_SMTC_INSTANT_REPLAY
1527 bool "Low-latency Dispatch of Deferred SMTC IPIs"
1528 depends on MIPS_MT_SMTC && !PREEMPT
1531 SMTC pseudo-interrupts between TCs are deferred and queued
1532 if the target TC is interrupt-inhibited (IXMT). In the first
1533 SMTC prototypes, these queued IPIs were serviced on return
1534 to user mode, or on entry into the kernel idle loop. The
1535 INSTANT_REPLAY option dispatches them as part of local_irq_restore()
1536 processing, which adds runtime overhead (hence the option to turn
1537 it off), but ensures that IPIs are handled promptly even under
1538 heavy I/O interrupt load.
1540 config MIPS_MT_SMTC_IM_BACKSTOP
1541 bool "Use per-TC register bits as backstop for inhibited IM bits"
1542 depends on MIPS_MT_SMTC
1545 To support multiple TC microthreads acting as "CPUs" within
1546 a VPE, VPE-wide interrupt mask bits must be specially manipulated
1547 during interrupt handling. To support legacy drivers and interrupt
1548 controller management code, SMTC has a "backstop" to track and
1549 if necessary restore the interrupt mask. This has some performance
1550 impact on interrupt service overhead. Disable it only if you know
1553 config MIPS_MT_SMTC_IRQAFF
1554 bool "Support IRQ affinity API"
1555 depends on MIPS_MT_SMTC
1558 Enables SMP IRQ affinity API (/proc/irq/*/smp_affinity, etc.)
1559 for SMTC Linux kernel. Requires platform support, of which
1560 an example can be found in the MIPS kernel i8259 and Malta
1561 platform code. It is recommended that MIPS_MT_SMTC_INSTANT_REPLAY
1562 be enabled if MIPS_MT_SMTC_IRQAFF is used. Adds overhead to
1563 interrupt dispatch, and should be used only if you know what
1566 config MIPS_VPE_LOADER_TOM
1567 bool "Load VPE program into memory hidden from linux"
1568 depends on MIPS_VPE_LOADER
1571 The loader can use memory that is present but has been hidden from
1572 Linux using the kernel command line option "mem=xxMB". It's up to
1573 you to ensure the amount you put in the option and the space your
1574 program requires is less or equal to the amount physically present.
1576 # this should possibly be in drivers/char, but it is rather cpu related. Hmmm
1577 config MIPS_VPE_APSP_API
1578 bool "Enable support for AP/SP API (RTLX)"
1579 depends on MIPS_VPE_LOADER
1582 config MIPS_APSP_KSPD
1584 depends on MIPS_VPE_APSP_API
1587 KSPD is a kernel daemon that accepts syscall requests from the SP
1588 side, actions them and returns the results. It also handles the
1589 "exit" syscall notifying other kernel modules the SP program is
1590 exiting. You probably want to say yes here.
1592 config SB1_PASS_1_WORKAROUNDS
1594 depends on CPU_SB1_PASS_1
1597 config SB1_PASS_2_WORKAROUNDS
1599 depends on CPU_SB1 && (CPU_SB1_PASS_2_2 || CPU_SB1_PASS_2)
1602 config SB1_PASS_2_1_WORKAROUNDS
1604 depends on CPU_SB1 && CPU_SB1_PASS_2
1607 config 64BIT_PHYS_ADDR
1613 config CPU_HAS_SMARTMIPS
1614 depends on SYS_SUPPORTS_SMARTMIPS
1615 bool "Support for the SmartMIPS ASE"
1617 SmartMIPS is a extension of the MIPS32 architecture aimed at
1618 increased security at both hardware and software level for
1619 smartcards. Enabling this option will allow proper use of the
1620 SmartMIPS instructions by Linux applications. However a kernel with
1621 this option will not work on a MIPS core without SmartMIPS core. If
1622 you don't know you probably don't have SmartMIPS and should say N
1629 # Vectored interrupt mode is an R2 feature
1631 config CPU_MIPSR2_IRQ_VI
1635 # Extended interrupt mode is an R2 feature
1637 config CPU_MIPSR2_IRQ_EI
1642 depends on !CPU_R3000
1645 config GENERIC_CLOCKEVENTS_BROADCAST
1651 config CPU_DADDI_WORKAROUNDS
1654 config CPU_R4000_WORKAROUNDS
1656 select CPU_R4400_WORKAROUNDS
1658 config CPU_R4400_WORKAROUNDS
1662 # Use the generic interrupt handling code in kernel/irq/:
1664 config GENERIC_HARDIRQS
1668 config GENERIC_IRQ_PROBE
1676 # - Highmem only makes sense for the 32-bit kernel.
1677 # - The current highmem code will only work properly on physically indexed
1678 # caches such as R3000, SB1, R7000 or those that look like they're virtually
1679 # indexed such as R4000/R4400 SC and MC versions or R10000. So for the
1680 # moment we protect the user and offer the highmem option only on machines
1681 # where it's known to be safe. This will not offer highmem on a few systems
1682 # such as MIPS32 and MIPS64 CPUs which may have virtual and physically
1683 # indexed CPUs but we're playing safe.
1684 # - We use SYS_SUPPORTS_HIGHMEM to offer highmem only for systems where we
1685 # know they might have memory configurations that could make use of highmem
1689 bool "High Memory Support"
1690 depends on 32BIT && CPU_SUPPORTS_HIGHMEM && SYS_SUPPORTS_HIGHMEM
1692 config CPU_SUPPORTS_HIGHMEM
1695 config SYS_SUPPORTS_HIGHMEM
1698 config SYS_SUPPORTS_SMARTMIPS
1701 config ARCH_FLATMEM_ENABLE
1705 config ARCH_DISCONTIGMEM_ENABLE
1707 default y if SGI_IP27
1709 Say Y to support efficient handling of discontiguous physical memory,
1710 for architectures which are either NUMA (Non-Uniform Memory Access)
1711 or have huge holes in the physical address space for other reasons.
1712 See <file:Documentation/vm/numa> for more.
1714 config ARCH_POPULATES_NODE_MAP
1717 config ARCH_SPARSEMEM_ENABLE
1719 select SPARSEMEM_STATIC
1723 depends on SYS_SUPPORTS_NUMA
1725 Say Y to compile the kernel to support NUMA (Non-Uniform Memory
1726 Access). This option improves performance on systems with more
1727 than two nodes; on two node systems it is generally better to
1728 leave it disabled; on single node systems disable this option
1731 config SYS_SUPPORTS_NUMA
1737 depends on NEED_MULTIPLE_NODES
1742 bool "Multi-Processing support"
1743 depends on SYS_SUPPORTS_SMP
1746 This enables support for systems with more than one CPU. If you have
1747 a system with only one CPU, like most personal computers, say N. If
1748 you have a system with more than one CPU, say Y.
1750 If you say N here, the kernel will run on single and multiprocessor
1751 machines, but will use only one CPU of a multiprocessor machine. If
1752 you say Y here, the kernel will run on many, but not all,
1753 singleprocessor machines. On a singleprocessor machine, the kernel
1754 will run faster if you say N here.
1756 People using multiprocessor machines who say Y here should also say
1757 Y to "Enhanced Real Time Clock Support", below.
1759 See also the SMP-HOWTO available at
1760 <http://www.tldp.org/docs.html#howto>.
1762 If you don't know what to do here, say N.
1767 config SYS_SUPPORTS_SMP
1770 config NR_CPUS_DEFAULT_1
1773 config NR_CPUS_DEFAULT_2
1776 config NR_CPUS_DEFAULT_4
1779 config NR_CPUS_DEFAULT_8
1782 config NR_CPUS_DEFAULT_16
1785 config NR_CPUS_DEFAULT_32
1788 config NR_CPUS_DEFAULT_64
1792 int "Maximum number of CPUs (2-64)"
1793 range 1 64 if NR_CPUS_DEFAULT_1
1795 default "1" if NR_CPUS_DEFAULT_1
1796 default "2" if NR_CPUS_DEFAULT_2
1797 default "4" if NR_CPUS_DEFAULT_4
1798 default "8" if NR_CPUS_DEFAULT_8
1799 default "16" if NR_CPUS_DEFAULT_16
1800 default "32" if NR_CPUS_DEFAULT_32
1801 default "64" if NR_CPUS_DEFAULT_64
1803 This allows you to specify the maximum number of CPUs which this
1804 kernel will support. The maximum supported value is 32 for 32-bit
1805 kernel and 64 for 64-bit kernels; the minimum value which makes
1806 sense is 1 for Qemu (useful only for kernel debugging purposes)
1807 and 2 for all others.
1809 This is purely to save memory - each supported CPU adds
1810 approximately eight kilobytes to the kernel image. For best
1811 performance should round up your number of processors to the next
1814 source "kernel/time/Kconfig"
1817 # Timer Interrupt Frequency Configuration
1821 prompt "Timer frequency"
1824 Allows the configuration of the timer frequency.
1827 <<<<<<< HEAD:arch/mips/Kconfig
1828 bool "48 HZ" if SYS_SUPPORTS_48HZ
1830 bool "48 HZ" if SYS_SUPPORTS_48HZ || SYS_SUPPORTS_ARBIT_HZ
1831 >>>>>>> 264e3e889d86e552b4191d69bb60f4f3b383135a:arch/mips/Kconfig
1834 bool "100 HZ" if SYS_SUPPORTS_100HZ || SYS_SUPPORTS_ARBIT_HZ
1837 bool "128 HZ" if SYS_SUPPORTS_128HZ || SYS_SUPPORTS_ARBIT_HZ
1840 bool "250 HZ" if SYS_SUPPORTS_250HZ || SYS_SUPPORTS_ARBIT_HZ
1843 bool "256 HZ" if SYS_SUPPORTS_256HZ || SYS_SUPPORTS_ARBIT_HZ
1846 bool "1000 HZ" if SYS_SUPPORTS_1000HZ || SYS_SUPPORTS_ARBIT_HZ
1849 bool "1024 HZ" if SYS_SUPPORTS_1024HZ || SYS_SUPPORTS_ARBIT_HZ
1853 config SYS_SUPPORTS_48HZ
1856 config SYS_SUPPORTS_100HZ
1859 config SYS_SUPPORTS_128HZ
1862 config SYS_SUPPORTS_250HZ
1865 config SYS_SUPPORTS_256HZ
1868 config SYS_SUPPORTS_1000HZ
1871 config SYS_SUPPORTS_1024HZ
1874 config SYS_SUPPORTS_ARBIT_HZ
1876 default y if !SYS_SUPPORTS_48HZ && !SYS_SUPPORTS_100HZ && \
1877 !SYS_SUPPORTS_128HZ && !SYS_SUPPORTS_250HZ && \
1878 !SYS_SUPPORTS_256HZ && !SYS_SUPPORTS_1000HZ && \
1879 !SYS_SUPPORTS_1024HZ
1884 default 100 if HZ_100
1885 default 128 if HZ_128
1886 default 250 if HZ_250
1887 default 256 if HZ_256
1888 default 1000 if HZ_1000
1889 default 1024 if HZ_1024
1891 source "kernel/Kconfig.preempt"
1893 config MIPS_INSANE_LARGE
1894 bool "Support for large 64-bit configurations"
1895 depends on CPU_R10000 && 64BIT
1897 MIPS R10000 does support a 44 bit / 16TB address space as opposed to
1898 previous 64-bit processors which only supported 40 bit / 1TB. If you
1899 need processes of more than 1TB virtual address space, say Y here.
1900 This will result in additional memory usage, so it is not
1901 recommended for normal users.
1904 bool "Kexec system call (EXPERIMENTAL)"
1905 depends on EXPERIMENTAL
1907 kexec is a system call that implements the ability to shutdown your
1908 current kernel, and to start another kernel. It is like a reboot
1909 but it is independent of the system firmware. And like a reboot
1910 you can start any kernel with it, not just Linux.
1912 The name comes from the similarity to the exec system call.
1914 It is an ongoing process to be certain the hardware in a machine
1915 is properly shutdown, so do not be surprised if this code does not
1916 initially work for you. It may help to enable device hotplugging
1917 support. As of this writing the exact hardware interface is
1918 strongly in flux, so no good recommendation can be made.
1921 bool "Enable seccomp to safely compute untrusted bytecode"
1925 This kernel feature is useful for number crunching applications
1926 that may need to compute untrusted bytecode during their
1927 execution. By using pipes or other transports made available to
1928 the process as file descriptors supporting the read/write
1929 syscalls, it's possible to isolate those applications in
1930 their own address space using seccomp. Once seccomp is
1931 enabled via /proc/<pid>/seccomp, it cannot be disabled
1932 and the task is only allowed to execute a few safe syscalls
1933 defined by each seccomp mode.
1935 If unsure, say Y. Only embedded should say N here.
1939 config RWSEM_GENERIC_SPINLOCK
1943 config LOCKDEP_SUPPORT
1947 config STACKTRACE_SUPPORT
1951 source "init/Kconfig"
1953 menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)"
1961 bool "Support for PCI controller"
1962 depends on HW_HAS_PCI
1965 Find out whether you have a PCI motherboard. PCI is the name of a
1966 bus system, i.e. the way the CPU talks to the other stuff inside
1967 your box. Other bus systems are ISA, EISA, or VESA. If you have PCI,
1973 source "drivers/pci/Kconfig"
1976 # ISA support is now enabled via select. Too many systems still have the one
1977 # or other ISA chip on the board that users don't know about so don't expect
1978 # users to choose the right thing ...
1985 depends on HW_HAS_EISA
1987 select GENERIC_ISA_DMA
1989 The Extended Industry Standard Architecture (EISA) bus was
1990 developed as an open alternative to the IBM MicroChannel bus.
1992 The EISA bus provided some of the features of the IBM MicroChannel
1993 bus while maintaining backward compatibility with cards made for
1994 the older ISA bus. The EISA bus saw limited use between 1988 and
1995 1995 when it was made obsolete by the PCI bus.
1997 Say Y here if you are building a kernel for an EISA-based machine.
2001 source "drivers/eisa/Kconfig"
2004 bool "TURBOchannel support"
2005 depends on MACH_DECSTATION
2007 TurboChannel is a DEC (now Compaq (now HP)) bus for Alpha and MIPS
2008 processors. Documentation on writing device drivers for TurboChannel
2010 <http://www.cs.arizona.edu/computer.help/policy/DIGITAL_unix/AA-PS3HD-TET1_html/TITLE.html>.
2013 # bool "Access.Bus support"
2026 source "drivers/pcmcia/Kconfig"
2028 source "drivers/pci/hotplug/Kconfig"
2032 menu "Executable file formats"
2034 source "fs/Kconfig.binfmt"
2040 bool "Include IRIX binary compatibility"
2041 depends on CPU_BIG_ENDIAN && 32BIT && BROKEN
2043 config MIPS32_COMPAT
2044 bool "Kernel support for Linux/MIPS 32-bit binary compatibility"
2047 Select this option if you want Linux/MIPS 32-bit binary
2048 compatibility. Since all software available for Linux/MIPS is
2049 currently 32-bit you should say Y here.
2053 depends on MIPS32_COMPAT
2056 config SYSVIPC_COMPAT
2058 depends on COMPAT && SYSVIPC
2062 bool "Kernel support for o32 binaries"
2063 depends on MIPS32_COMPAT
2065 Select this option if you want to run o32 binaries. These are pure
2066 32-bit binaries as used by the 32-bit Linux/MIPS port. Most of
2067 existing binaries are in this format.
2072 bool "Kernel support for n32 binaries"
2073 depends on MIPS32_COMPAT
2075 Select this option if you want to run n32 binaries. These are
2076 64-bit binaries using 32-bit quantities for addressing and certain
2077 data that would normally be 64-bit. They are used in special
2084 default y if MIPS32_O32 || MIPS32_N32
2088 menu "Power management options"
2090 config ARCH_SUSPEND_POSSIBLE
2094 source "kernel/power/Kconfig"
2098 source "net/Kconfig"
2100 source "drivers/Kconfig"
2104 source "arch/mips/Kconfig.debug"
2106 source "security/Kconfig"
2108 source "crypto/Kconfig"
2110 source "lib/Kconfig"