arch/powerpc/boot/dts/sbc8548.dts

   1 /*
   2  * SBC8548 Device Tree Source
   3  *
   4  * Copyright 2007 Wind River Systems Inc.
   5  *
   6  * Paul Gortmaker (see MAINTAINERS for contact information)
   7  *
   8  * This program is free software; you can redistribute  it and/or modify it
   9  * under  the terms of  the GNU General  Public License as published by the
  10  * Free Software Foundation;  either version 2 of the  License, or (at your
  11  * option) any later version.
  12  */
  13
  14
  15 /dts-v1/;
  16
  17 / {
  18         model = "SBC8548";
  19         compatible = "SBC8548";
  20         #address-cells = <1>;
  21         #size-cells = <1>;
  22
  23         aliases {
  24                 ethernet0 = &enet0;
  25                 ethernet1 = &enet1;
  26                 serial0 = &serial0;
  27                 serial1 = &serial1;
  28                 pci0 = &pci0;
  29                 /* pci1 doesn't have a corresponding physical connector */
  30                 pci2 = &pci2;
  31         };
  32
  33         cpus {
  34                 #address-cells = <1>;
  35                 #size-cells = <0>;
  36
  37                 PowerPC,8548@0 {
  38                         device_type = "cpu";
  39                         reg = <0>;
  40                         d-cache-line-size = <0x20>;     // 32 bytes
  41                         i-cache-line-size = <0x20>;     // 32 bytes
  42                         d-cache-size = <0x8000>;        // L1, 32K
  43                         i-cache-size = <0x8000>;        // L1, 32K
  44                         timebase-frequency = <0>;       // From uboot
  45                         bus-frequency = <0>;
  46                         clock-frequency = <0>;
  47                 };
  48         };
  49
  50         memory {
  51                 device_type = "memory";
  52                 reg = <0x00000000 0x10000000>;
  53         };
  54
  55         soc8548@e0000000 {
  56                 #address-cells = <1>;
  57                 #size-cells = <1>;
  58                 device_type = "soc";
  59                 ranges = <0x00000000 0xe0000000 0x00100000>;
  60                 reg = <0xe0000000 0x00001000>;  // CCSRBAR
  61                 bus-frequency = <0>;
  62
  63                 memory-controller@2000 {
  64                         compatible = "fsl,8548-memory-controller";
  65                         reg = <0x2000 0x1000>;
  66                         interrupt-parent = <&mpic>;
  67                         interrupts = <0x12 0x2>;
  68                 };
  69
  70                 l2-cache-controller@20000 {
  71                         compatible = "fsl,8548-l2-cache-controller";
  72                         reg = <0x20000 0x1000>;
  73                         cache-line-size = <0x20>;       // 32 bytes
  74                         cache-size = <0x80000>; // L2, 512K
  75                         interrupt-parent = <&mpic>;
  76                         interrupts = <0x10 0x2>;
  77                 };
  78
  79                 i2c@3000 {
  80                         #address-cells = <1>;
  81                         #size-cells = <0>;
  82                         cell-index = <0>;
  83                         compatible = "fsl-i2c";
  84                         reg = <0x3000 0x100>;
  85                         interrupts = <0x2b 0x2>;
  86                         interrupt-parent = <&mpic>;
  87                         dfsrr;
  88                 };
  89
  90                 i2c@3100 {
  91                         #address-cells = <1>;
  92                         #size-cells = <0>;
  93                         cell-index = <1>;
  94                         compatible = "fsl-i2c";
  95                         reg = <0x3100 0x100>;
  96                         interrupts = <0x2b 0x2>;
  97                         interrupt-parent = <&mpic>;
  98                         dfsrr;
  99                 };
 100
 101                 mdio@24520 {
 102                         #address-cells = <1>;
 103                         #size-cells = <0>;
 104                         compatible = "fsl,gianfar-mdio";
 105                         reg = <0x24520 0x20>;
 106
 107                         phy0: ethernet-phy@19 {
 108                                 interrupt-parent = <&mpic>;
 109                                 interrupts = <0x6 0x1>;
 110                                 reg = <0x19>;
 111                                 device_type = "ethernet-phy";
 112                         };
 113                         phy1: ethernet-phy@1a {
 114                                 interrupt-parent = <&mpic>;
 115                                 interrupts = <0x7 0x1>;
 116                                 reg = <0x1a>;
 117                                 device_type = "ethernet-phy";
 118                         };
 119                 };
 120
 121                 enet0: ethernet@24000 {
 122                         cell-index = <0>;
 123                         device_type = "network";
 124                         model = "eTSEC";
 125                         compatible = "gianfar";
 126                         reg = <0x24000 0x1000>;
 127                         local-mac-address = [ 00 00 00 00 00 00 ];
 128                         interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
 129                         interrupt-parent = <&mpic>;
 130                         phy-handle = <&phy0>;
 131                 };
 132
 133                 enet1: ethernet@25000 {
 134                         cell-index = <1>;
 135                         device_type = "network";
 136                         model = "eTSEC";
 137                         compatible = "gianfar";
 138                         reg = <0x25000 0x1000>;
 139                         local-mac-address = [ 00 00 00 00 00 00 ];
 140                         interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>;
 141                         interrupt-parent = <&mpic>;
 142                         phy-handle = <&phy1>;
 143                 };
 144
 145                 serial0: serial@4500 {
 146                         cell-index = <0>;
 147                         device_type = "serial";
 148                         compatible = "ns16550";
 149                         reg = <0x4500 0x100>;   // reg base, size
 150                         clock-frequency = <0>;  // should we fill in in uboot?
 151                         interrupts = <0x2a 0x2>;
 152                         interrupt-parent = <&mpic>;
 153                 };
 154
 155                 serial1: serial@4600 {
 156                         cell-index = <1>;
 157                         device_type = "serial";
 158                         compatible = "ns16550";
 159                         reg = <0x4600 0x100>;   // reg base, size
 160                         clock-frequency = <0>;  // should we fill in in uboot?
 161                         interrupts = <0x2a 0x2>;
 162                         interrupt-parent = <&mpic>;
 163                 };
 164
 165                 global-utilities@e0000 {        //global utilities reg
 166                         compatible = "fsl,mpc8548-guts";
 167                         reg = <0xe0000 0x1000>;
 168                         fsl,has-rstcr;
 169                 };
 170
 171                 mpic: pic@40000 {
 172                         interrupt-controller;
 173                         #address-cells = <0>;
 174                         #size-cells = <0>;
 175                         #interrupt-cells = <2>;
 176                         reg = <0x40000 0x40000>;
 177                         compatible = "chrp,open-pic";
 178                         device_type = "open-pic";
 179                         big-endian;
 180                 };
 181         };
 182
 183         pci0: pci@e0008000 {
 184                 cell-index = <0>;
 185                 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 186                 interrupt-map = <
 187 <<<<<<< HEAD:arch/powerpc/boot/dts/sbc8548.dts
 188                         /* IDSEL 0x01 (PCI-X slot) */
 189                         0x0800 0x0 0x0 0x1 &mpic 0x0 0x1
 190                         0x0800 0x0 0x0 0x2 &mpic 0x1 0x1
 191                         0x0800 0x0 0x0 0x3 &mpic 0x2 0x1
 192                         0x0800 0x0 0x0 0x4 &mpic 0x3 0x1>;
 193 =======
 194                         /* IDSEL 0x01 (PCI-X slot) @66MHz */
 195                         0x0800 0x0 0x0 0x1 &mpic 0x2 0x1
 196                         0x0800 0x0 0x0 0x2 &mpic 0x3 0x1
 197                         0x0800 0x0 0x0 0x3 &mpic 0x4 0x1
 198                         0x0800 0x0 0x0 0x4 &mpic 0x1 0x1
 199
 200                         /* IDSEL 0x11 (PCI, 3.3V 32bit) @33MHz */
 201                         0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
 202                         0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
 203                         0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
 204                         0x8800 0x0 0x0 0x4 &mpic 0x1 0x1>;
 205 >>>>>>> 264e3e889d86e552b4191d69bb60f4f3b383135a:arch/powerpc/boot/dts/sbc8548.dts
 206
 207                 interrupt-parent = <&mpic>;
 208                 interrupts = <0x18 0x2>;
 209                 bus-range = <0 0>;
 210                 ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x10000000
 211                           0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00800000>;
 212                 clock-frequency = <66666666>;
 213                 #interrupt-cells = <1>;
 214                 #size-cells = <2>;
 215                 #address-cells = <3>;
 216                 reg = <0xe0008000 0x1000>;
 217                 compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
 218                 device_type = "pci";
 219         };
 220
 221         pci2: pcie@e000a000 {
 222                 cell-index = <2>;
 223                 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 224                 interrupt-map = <
 225
 226                         /* IDSEL 0x0 (PEX) */
 227                         0x0000 0x0 0x0 0x1 &mpic 0x0 0x1
 228                         0x0000 0x0 0x0 0x2 &mpic 0x1 0x1
 229                         0x0000 0x0 0x0 0x3 &mpic 0x2 0x1
 230                         0x0000 0x0 0x0 0x4 &mpic 0x3 0x1>;
 231
 232                 interrupt-parent = <&mpic>;
 233                 interrupts = <0x1a 0x2>;
 234                 bus-range = <0x0 0xff>;
 235                 ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
 236                           0x01000000 0x0 0x00000000 0xe3000000 0x0 0x08000000>;
 237                 clock-frequency = <33333333>;
 238                 #interrupt-cells = <1>;
 239                 #size-cells = <2>;
 240                 #address-cells = <3>;
 241                 reg = <0xe000a000 0x1000>;
 242                 compatible = "fsl,mpc8548-pcie";
 243                 device_type = "pci";
 244                 pcie@0 {
 245                         reg = <0x0 0x0 0x0 0x0 0x0>;
 246                         #size-cells = <2>;
 247                         #address-cells = <3>;
 248                         device_type = "pci";
 249                         ranges = <0x02000000 0x0 0xa0000000
 250                                   0x02000000 0x0 0xa0000000
 251                                   0x0 0x20000000
 252
 253                                   0x01000000 0x0 0x00000000
 254                                   0x01000000 0x0 0x00000000
 255                                   0x0 0x08000000>;
 256                 };
 257         };
 258 };