2 * Copyright (C) 1991, 1992 Linus Torvalds
4 * Pentium III FXSR, SSE support
5 * Gareth Hughes <gareth@valinux.com>, May 2000
9 * 'Traps.c' handles hardware traps and faults after we have saved some
12 #include <linux/sched.h>
13 #include <linux/kernel.h>
14 #include <linux/string.h>
15 #include <linux/errno.h>
16 #include <linux/timer.h>
18 #include <linux/init.h>
19 #include <linux/delay.h>
20 #include <linux/spinlock.h>
21 #include <linux/interrupt.h>
22 #include <linux/highmem.h>
23 #include <linux/kallsyms.h>
24 #include <linux/ptrace.h>
25 #include <linux/utsname.h>
26 #include <linux/kprobes.h>
27 #include <linux/kexec.h>
28 #include <linux/unwind.h>
29 #include <linux/uaccess.h>
30 #include <linux/nmi.h>
31 #include <linux/bug.h>
34 #include <linux/ioport.h>
35 #include <linux/eisa.h>
39 #include <linux/mca.h>
42 #if defined(CONFIG_EDAC)
43 #include <linux/edac.h>
46 #include <asm/processor.h>
47 #include <asm/system.h>
49 #include <asm/atomic.h>
50 #include <asm/debugreg.h>
54 #include <asm/unwind.h>
56 #include <asm/arch_hooks.h>
57 #include <linux/kdebug.h>
58 #include <asm/stacktrace.h>
60 #include <linux/module.h>
62 #include "mach_traps.h"
64 int panic_on_unrecovered_nmi
;
66 DECLARE_BITMAP(used_vectors
, NR_VECTORS
);
67 EXPORT_SYMBOL_GPL(used_vectors
);
69 asmlinkage
int system_call(void);
71 /* Do we ignore FPU interrupts ? */
72 char ignore_fpu_irq
= 0;
75 * The IDT has to be page-aligned to simplify the Pentium
76 * F0 0F bug workaround.. We have a special link segment
79 gate_desc idt_table
[256]
80 __attribute__((__section__(".data.idt"))) = { { { { 0, 0 } } }, };
82 asmlinkage
void divide_error(void);
83 asmlinkage
void debug(void);
84 asmlinkage
void nmi(void);
85 asmlinkage
void int3(void);
86 asmlinkage
void overflow(void);
87 asmlinkage
void bounds(void);
88 asmlinkage
void invalid_op(void);
89 asmlinkage
void device_not_available(void);
90 asmlinkage
void coprocessor_segment_overrun(void);
91 asmlinkage
void invalid_TSS(void);
92 asmlinkage
void segment_not_present(void);
93 asmlinkage
void stack_segment(void);
94 asmlinkage
void general_protection(void);
95 asmlinkage
void page_fault(void);
96 asmlinkage
void coprocessor_error(void);
97 asmlinkage
void simd_coprocessor_error(void);
98 asmlinkage
void alignment_check(void);
99 asmlinkage
void spurious_interrupt_bug(void);
100 asmlinkage
void machine_check(void);
102 int kstack_depth_to_print
= 24;
103 static unsigned int code_bytes
= 64;
105 void printk_address(unsigned long address
, int reliable
)
107 #ifdef CONFIG_KALLSYMS
108 unsigned long offset
= 0, symsize
;
115 symname
= kallsyms_lookup(address
, &symsize
, &offset
,
118 printk(" [<%08lx>]\n", address
);
122 strcpy(reliab
, "? ");
125 modname
= delim
= "";
126 printk(" [<%08lx>] %s%s%s%s%s+0x%lx/0x%lx\n",
127 address
, reliab
, delim
, modname
, delim
, symname
, offset
, symsize
);
129 printk(" [<%08lx>]\n", address
);
133 static inline int valid_stack_ptr(struct thread_info
*tinfo
, void *p
, unsigned size
)
135 return p
> (void *)tinfo
&&
136 p
<= (void *)tinfo
+ THREAD_SIZE
- size
;
139 /* The form of the top of the frame on the stack */
141 struct stack_frame
*next_frame
;
142 unsigned long return_address
;
145 static inline unsigned long print_context_stack(struct thread_info
*tinfo
,
146 unsigned long *stack
, unsigned long bp
,
147 const struct stacktrace_ops
*ops
, void *data
)
149 struct stack_frame
*frame
= (struct stack_frame
*)bp
;
151 while (valid_stack_ptr(tinfo
, stack
, sizeof(*stack
))) {
155 if (__kernel_text_address(addr
)) {
156 if ((unsigned long) stack
== bp
+ 4) {
157 ops
->address(data
, addr
, 1);
158 frame
= frame
->next_frame
;
159 bp
= (unsigned long) frame
;
161 ops
->address(data
, addr
, bp
== 0);
169 #define MSG(msg) ops->warning(data, msg)
171 void dump_trace(struct task_struct
*task
, struct pt_regs
*regs
,
172 unsigned long *stack
, unsigned long bp
,
173 const struct stacktrace_ops
*ops
, void *data
)
182 stack
= (unsigned long *)task
->thread
.sp
;
185 #ifdef CONFIG_FRAME_POINTER
187 if (task
== current
) {
188 /* Grab bp right from our regs */
189 asm ("movl %%ebp, %0" : "=r" (bp
) : );
191 /* bp is the last reg pushed by switch_to */
192 bp
= *(unsigned long *) task
->thread
.sp
;
198 struct thread_info
*context
;
199 context
= (struct thread_info
*)
200 ((unsigned long)stack
& (~(THREAD_SIZE
- 1)));
201 bp
= print_context_stack(context
, stack
, bp
, ops
, data
);
202 /* Should be after the line below, but somewhere
203 in early boot context comes out corrupted and we
204 can't reference it -AK */
205 if (ops
->stack(data
, "IRQ") < 0)
207 stack
= (unsigned long*)context
->previous_esp
;
210 touch_nmi_watchdog();
213 EXPORT_SYMBOL(dump_trace
);
216 print_trace_warning_symbol(void *data
, char *msg
, unsigned long symbol
)
219 print_symbol(msg
, symbol
);
223 static void print_trace_warning(void *data
, char *msg
)
225 printk("%s%s\n", (char *)data
, msg
);
228 static int print_trace_stack(void *data
, char *name
)
234 * Print one address/symbol entries per line.
236 static void print_trace_address(void *data
, unsigned long addr
, int reliable
)
238 printk("%s [<%08lx>] ", (char *)data
, addr
);
241 print_symbol("%s\n", addr
);
242 touch_nmi_watchdog();
245 static const struct stacktrace_ops print_trace_ops
= {
246 .warning
= print_trace_warning
,
247 .warning_symbol
= print_trace_warning_symbol
,
248 .stack
= print_trace_stack
,
249 .address
= print_trace_address
,
253 show_trace_log_lvl(struct task_struct
*task
, struct pt_regs
*regs
,
254 unsigned long *stack
, unsigned long bp
, char *log_lvl
)
256 dump_trace(task
, regs
, stack
, bp
, &print_trace_ops
, log_lvl
);
257 printk("%s =======================\n", log_lvl
);
260 void show_trace(struct task_struct
*task
, struct pt_regs
*regs
,
261 unsigned long *stack
, unsigned long bp
)
263 show_trace_log_lvl(task
, regs
, stack
, bp
, "");
266 static void show_stack_log_lvl(struct task_struct
*task
, struct pt_regs
*regs
,
267 unsigned long *sp
, unsigned long bp
, char *log_lvl
)
269 unsigned long *stack
;
274 sp
= (unsigned long*)task
->thread
.sp
;
276 sp
= (unsigned long *)&sp
;
280 for(i
= 0; i
< kstack_depth_to_print
; i
++) {
281 if (kstack_end(stack
))
283 if (i
&& ((i
% 8) == 0))
284 printk("\n%s ", log_lvl
);
285 printk("%08lx ", *stack
++);
287 printk("\n%sCall Trace:\n", log_lvl
);
288 show_trace_log_lvl(task
, regs
, sp
, bp
, log_lvl
);
291 void show_stack(struct task_struct
*task
, unsigned long *sp
)
294 show_stack_log_lvl(task
, NULL
, sp
, 0, "");
298 * The architecture-independent dump_stack generator
300 void dump_stack(void)
303 unsigned long bp
= 0;
305 #ifdef CONFIG_FRAME_POINTER
307 asm("movl %%ebp, %0" : "=r" (bp
):);
310 printk("Pid: %d, comm: %.20s %s %s %.*s\n",
311 current
->pid
, current
->comm
, print_tainted(),
312 init_utsname()->release
,
313 (int)strcspn(init_utsname()->version
, " "),
314 init_utsname()->version
);
315 show_trace(current
, NULL
, &stack
, bp
);
318 EXPORT_SYMBOL(dump_stack
);
320 void show_registers(struct pt_regs
*regs
)
325 __show_registers(regs
, 0);
326 printk(KERN_EMERG
"Process %.*s (pid: %d, ti=%p task=%p task.ti=%p)",
327 TASK_COMM_LEN
, current
->comm
, task_pid_nr(current
),
328 current_thread_info(), current
, task_thread_info(current
));
330 * When in-kernel, we also print out the stack and code at the
331 * time of the fault..
333 if (!user_mode_vm(regs
)) {
335 unsigned int code_prologue
= code_bytes
* 43 / 64;
336 unsigned int code_len
= code_bytes
;
339 printk("\n" KERN_EMERG
"Stack: ");
340 show_stack_log_lvl(NULL
, regs
, ®s
->sp
, 0, KERN_EMERG
);
342 printk(KERN_EMERG
"Code: ");
344 ip
= (u8
*)regs
->ip
- code_prologue
;
345 if (ip
< (u8
*)PAGE_OFFSET
||
346 probe_kernel_address(ip
, c
)) {
347 /* try starting at EIP */
349 code_len
= code_len
- code_prologue
+ 1;
351 for (i
= 0; i
< code_len
; i
++, ip
++) {
352 if (ip
< (u8
*)PAGE_OFFSET
||
353 probe_kernel_address(ip
, c
)) {
354 printk(" Bad EIP value.");
357 if (ip
== (u8
*)regs
->ip
)
358 printk("<%02x> ", c
);
366 int is_valid_bugaddr(unsigned long ip
)
370 if (ip
< PAGE_OFFSET
)
372 if (probe_kernel_address((unsigned short *)ip
, ud2
))
375 return ud2
== 0x0b0f;
378 static int die_counter
;
380 int __kprobes
__die(const char * str
, struct pt_regs
* regs
, long err
)
385 printk(KERN_EMERG
"%s: %04lx [#%d] ", str
, err
& 0xffff, ++die_counter
);
386 #ifdef CONFIG_PREEMPT
392 #ifdef CONFIG_DEBUG_PAGEALLOC
393 printk("DEBUG_PAGEALLOC");
397 if (notify_die(DIE_OOPS
, str
, regs
, err
,
398 current
->thread
.trap_no
, SIGSEGV
) !=
400 show_registers(regs
);
401 /* Executive summary in case the oops scrolled away */
402 sp
= (unsigned long) (®s
->sp
);
404 if (user_mode(regs
)) {
406 ss
= regs
->ss
& 0xffff;
408 printk(KERN_EMERG
"EIP: [<%08lx>] ", regs
->ip
);
409 print_symbol("%s", regs
->ip
);
410 printk(" SS:ESP %04x:%08lx\n", ss
, sp
);
418 * This is gone through when something in the kernel has done something bad and
419 * is about to be terminated.
421 void die(const char * str
, struct pt_regs
* regs
, long err
)
426 int lock_owner_depth
;
428 .lock
= __RAW_SPIN_LOCK_UNLOCKED
,
430 .lock_owner_depth
= 0
436 if (die
.lock_owner
!= raw_smp_processor_id()) {
438 raw_local_irq_save(flags
);
439 __raw_spin_lock(&die
.lock
);
440 die
.lock_owner
= smp_processor_id();
441 die
.lock_owner_depth
= 0;
444 raw_local_irq_save(flags
);
446 if (++die
.lock_owner_depth
< 3) {
447 report_bug(regs
->ip
, regs
);
449 if (__die(str
, regs
, err
))
452 printk(KERN_EMERG
"Recursive die() failure, output suppressed\n");
457 add_taint(TAINT_DIE
);
458 __raw_spin_unlock(&die
.lock
);
459 raw_local_irq_restore(flags
);
464 if (kexec_should_crash(current
))
468 panic("Fatal exception in interrupt");
471 panic("Fatal exception");
477 static inline void die_if_kernel(const char * str
, struct pt_regs
* regs
, long err
)
479 if (!user_mode_vm(regs
))
483 static void __kprobes
do_trap(int trapnr
, int signr
, char *str
, int vm86
,
484 struct pt_regs
* regs
, long error_code
,
487 struct task_struct
*tsk
= current
;
489 if (regs
->flags
& VM_MASK
) {
495 if (!user_mode(regs
))
500 * We want error_code and trap_no set for userspace faults and
501 * kernelspace faults which result in die(), but not
502 * kernelspace faults which are fixed up. die() gives the
503 * process no chance to handle the signal and notice the
504 * kernel fault information, so that won't result in polluting
505 * the information about previously queued, but not yet
506 * delivered, faults. See also do_general_protection below.
508 tsk
->thread
.error_code
= error_code
;
509 tsk
->thread
.trap_no
= trapnr
;
512 force_sig_info(signr
, info
, tsk
);
514 force_sig(signr
, tsk
);
519 if (!fixup_exception(regs
)) {
520 tsk
->thread
.error_code
= error_code
;
521 tsk
->thread
.trap_no
= trapnr
;
522 die(str
, regs
, error_code
);
528 int ret
= handle_vm86_trap((struct kernel_vm86_regs
*) regs
, error_code
, trapnr
);
529 if (ret
) goto trap_signal
;
534 #define DO_ERROR(trapnr, signr, str, name) \
535 void do_##name(struct pt_regs * regs, long error_code) \
537 if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \
540 do_trap(trapnr, signr, str, 0, regs, error_code, NULL); \
543 #define DO_ERROR_INFO(trapnr, signr, str, name, sicode, siaddr, irq) \
544 void do_##name(struct pt_regs * regs, long error_code) \
548 local_irq_enable(); \
549 info.si_signo = signr; \
551 info.si_code = sicode; \
552 info.si_addr = (void __user *)siaddr; \
553 if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \
556 do_trap(trapnr, signr, str, 0, regs, error_code, &info); \
559 #define DO_VM86_ERROR(trapnr, signr, str, name) \
560 void do_##name(struct pt_regs * regs, long error_code) \
562 if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \
565 do_trap(trapnr, signr, str, 1, regs, error_code, NULL); \
568 #define DO_VM86_ERROR_INFO(trapnr, signr, str, name, sicode, siaddr) \
569 void do_##name(struct pt_regs * regs, long error_code) \
572 info.si_signo = signr; \
574 info.si_code = sicode; \
575 info.si_addr = (void __user *)siaddr; \
576 trace_hardirqs_fixup(); \
577 if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \
580 do_trap(trapnr, signr, str, 1, regs, error_code, &info); \
583 DO_VM86_ERROR_INFO( 0, SIGFPE
, "divide error", divide_error
, FPE_INTDIV
, regs
->ip
)
584 #ifndef CONFIG_KPROBES
585 DO_VM86_ERROR( 3, SIGTRAP
, "int3", int3
)
587 DO_VM86_ERROR( 4, SIGSEGV
, "overflow", overflow
)
588 DO_VM86_ERROR( 5, SIGSEGV
, "bounds", bounds
)
589 DO_ERROR_INFO( 6, SIGILL
, "invalid opcode", invalid_op
, ILL_ILLOPN
, regs
->ip
, 0)
590 DO_ERROR( 9, SIGFPE
, "coprocessor segment overrun", coprocessor_segment_overrun
)
591 DO_ERROR(10, SIGSEGV
, "invalid TSS", invalid_TSS
)
592 DO_ERROR(11, SIGBUS
, "segment not present", segment_not_present
)
593 DO_ERROR(12, SIGBUS
, "stack segment", stack_segment
)
594 DO_ERROR_INFO(17, SIGBUS
, "alignment check", alignment_check
, BUS_ADRALN
, 0, 0)
595 DO_ERROR_INFO(32, SIGSEGV
, "iret exception", iret_error
, ILL_BADSTK
, 0, 1)
597 void __kprobes
do_general_protection(struct pt_regs
* regs
,
601 struct tss_struct
*tss
= &per_cpu(init_tss
, cpu
);
602 struct thread_struct
*thread
= ¤t
->thread
;
605 * Perform the lazy TSS's I/O bitmap copy. If the TSS has an
606 * invalid offset set (the LAZY one) and the faulting thread has
607 * a valid I/O bitmap pointer, we copy the I/O bitmap in the TSS
608 * and we set the offset field correctly. Then we let the CPU to
609 * restart the faulting instruction.
611 if (tss
->x86_tss
.io_bitmap_base
== INVALID_IO_BITMAP_OFFSET_LAZY
&&
612 thread
->io_bitmap_ptr
) {
613 memcpy(tss
->io_bitmap
, thread
->io_bitmap_ptr
,
614 thread
->io_bitmap_max
);
616 * If the previously set map was extending to higher ports
617 * than the current one, pad extra space with 0xff (no access).
619 if (thread
->io_bitmap_max
< tss
->io_bitmap_max
)
620 memset((char *) tss
->io_bitmap
+
621 thread
->io_bitmap_max
, 0xff,
622 tss
->io_bitmap_max
- thread
->io_bitmap_max
);
623 tss
->io_bitmap_max
= thread
->io_bitmap_max
;
624 tss
->x86_tss
.io_bitmap_base
= IO_BITMAP_OFFSET
;
625 tss
->io_bitmap_owner
= thread
;
631 if (regs
->flags
& VM_MASK
)
634 if (!user_mode(regs
))
637 current
->thread
.error_code
= error_code
;
638 current
->thread
.trap_no
= 13;
639 if (show_unhandled_signals
&& unhandled_signal(current
, SIGSEGV
) &&
640 printk_ratelimit()) {
642 "%s[%d] general protection ip:%lx sp:%lx error:%lx",
643 current
->comm
, task_pid_nr(current
),
644 regs
->ip
, regs
->sp
, error_code
);
645 print_vma_addr(" in ", regs
->ip
);
649 force_sig(SIGSEGV
, current
);
654 handle_vm86_fault((struct kernel_vm86_regs
*) regs
, error_code
);
658 if (!fixup_exception(regs
)) {
659 current
->thread
.error_code
= error_code
;
660 current
->thread
.trap_no
= 13;
661 if (notify_die(DIE_GPF
, "general protection fault", regs
,
662 error_code
, 13, SIGSEGV
) == NOTIFY_STOP
)
664 die("general protection fault", regs
, error_code
);
668 static __kprobes
void
669 mem_parity_error(unsigned char reason
, struct pt_regs
* regs
)
671 printk(KERN_EMERG
"Uhhuh. NMI received for unknown reason %02x on "
672 "CPU %d.\n", reason
, smp_processor_id());
673 printk(KERN_EMERG
"You have some hardware problem, likely on the PCI bus.\n");
675 #if defined(CONFIG_EDAC)
676 if(edac_handler_set()) {
677 edac_atomic_assert_error();
682 if (panic_on_unrecovered_nmi
)
683 panic("NMI: Not continuing");
685 printk(KERN_EMERG
"Dazed and confused, but trying to continue\n");
687 /* Clear and disable the memory parity error line. */
688 clear_mem_error(reason
);
691 static __kprobes
void
692 io_check_error(unsigned char reason
, struct pt_regs
* regs
)
696 printk(KERN_EMERG
"NMI: IOCK error (debug interrupt?)\n");
697 show_registers(regs
);
699 /* Re-enable the IOCK line, wait for a few seconds */
700 reason
= (reason
& 0xf) | 8;
703 while (--i
) udelay(1000);
708 static __kprobes
void
709 unknown_nmi_error(unsigned char reason
, struct pt_regs
* regs
)
712 /* Might actually be able to figure out what the guilty party
719 printk(KERN_EMERG
"Uhhuh. NMI received for unknown reason %02x on "
720 "CPU %d.\n", reason
, smp_processor_id());
721 printk(KERN_EMERG
"Do you have a strange power saving mode enabled?\n");
722 if (panic_on_unrecovered_nmi
)
723 panic("NMI: Not continuing");
725 printk(KERN_EMERG
"Dazed and confused, but trying to continue\n");
728 static DEFINE_SPINLOCK(nmi_print_lock
);
730 void __kprobes
die_nmi(struct pt_regs
*regs
, const char *msg
)
732 if (notify_die(DIE_NMIWATCHDOG
, msg
, regs
, 0, 2, SIGINT
) ==
736 spin_lock(&nmi_print_lock
);
738 * We are in trouble anyway, lets at least try
739 * to get a message out.
742 printk(KERN_EMERG
"%s", msg
);
743 printk(" on CPU%d, ip %08lx, registers:\n",
744 smp_processor_id(), regs
->ip
);
745 show_registers(regs
);
747 spin_unlock(&nmi_print_lock
);
750 /* If we are in kernel we are probably nested up pretty bad
751 * and might aswell get out now while we still can.
753 if (!user_mode_vm(regs
)) {
754 current
->thread
.trap_no
= 2;
761 static __kprobes
void default_do_nmi(struct pt_regs
* regs
)
763 unsigned char reason
= 0;
765 /* Only the BSP gets external NMIs from the system. */
766 if (!smp_processor_id())
767 reason
= get_nmi_reason();
769 if (!(reason
& 0xc0)) {
770 if (notify_die(DIE_NMI_IPI
, "nmi_ipi", regs
, reason
, 2, SIGINT
)
773 #ifdef CONFIG_X86_LOCAL_APIC
775 * Ok, so this is none of the documented NMI sources,
776 * so it must be the NMI watchdog.
778 if (nmi_watchdog_tick(regs
, reason
))
780 if (!do_nmi_callback(regs
, smp_processor_id()))
782 unknown_nmi_error(reason
, regs
);
786 if (notify_die(DIE_NMI
, "nmi", regs
, reason
, 2, SIGINT
) == NOTIFY_STOP
)
789 mem_parity_error(reason
, regs
);
791 io_check_error(reason
, regs
);
793 * Reassert NMI in case it became active meanwhile
794 * as it's edge-triggered.
799 static int ignore_nmis
;
801 __kprobes
void do_nmi(struct pt_regs
* regs
, long error_code
)
807 cpu
= smp_processor_id();
812 default_do_nmi(regs
);
823 void restart_nmi(void)
829 #ifdef CONFIG_KPROBES
830 void __kprobes
do_int3(struct pt_regs
*regs
, long error_code
)
832 trace_hardirqs_fixup();
834 if (notify_die(DIE_INT3
, "int3", regs
, error_code
, 3, SIGTRAP
)
837 /* This is an interrupt gate, because kprobes wants interrupts
838 disabled. Normal trap handlers don't. */
839 restore_interrupts(regs
);
840 do_trap(3, SIGTRAP
, "int3", 1, regs
, error_code
, NULL
);
845 * Our handling of the processor debug registers is non-trivial.
846 * We do not clear them on entry and exit from the kernel. Therefore
847 * it is possible to get a watchpoint trap here from inside the kernel.
848 * However, the code in ./ptrace.c has ensured that the user can
849 * only set watchpoints on userspace addresses. Therefore the in-kernel
850 * watchpoint trap can only occur in code which is reading/writing
851 * from user space. Such code must not hold kernel locks (since it
852 * can equally take a page fault), therefore it is safe to call
853 * force_sig_info even though that claims and releases locks.
855 * Code in ./signal.c ensures that the debug control register
856 * is restored before we deliver any signal, and therefore that
857 * user code runs with the correct debug control register even though
860 * Being careful here means that we don't have to be as careful in a
861 * lot of more complicated places (task switching can be a bit lazy
862 * about restoring all the debug state, and ptrace doesn't have to
863 * find every occurrence of the TF bit that could be saved away even
866 void __kprobes
do_debug(struct pt_regs
* regs
, long error_code
)
868 unsigned int condition
;
869 struct task_struct
*tsk
= current
;
871 trace_hardirqs_fixup();
873 get_debugreg(condition
, 6);
876 * The processor cleared BTF, so don't mark that we need it set.
878 clear_tsk_thread_flag(tsk
, TIF_DEBUGCTLMSR
);
879 tsk
->thread
.debugctlmsr
= 0;
881 if (notify_die(DIE_DEBUG
, "debug", regs
, condition
, error_code
,
882 SIGTRAP
) == NOTIFY_STOP
)
884 /* It's safe to allow irq's after DR6 has been saved */
885 if (regs
->flags
& X86_EFLAGS_IF
)
888 /* Mask out spurious debug traps due to lazy DR7 setting */
889 if (condition
& (DR_TRAP0
|DR_TRAP1
|DR_TRAP2
|DR_TRAP3
)) {
890 if (!tsk
->thread
.debugreg7
)
894 if (regs
->flags
& VM_MASK
)
897 /* Save debug status register where ptrace can see it */
898 tsk
->thread
.debugreg6
= condition
;
901 * Single-stepping through TF: make sure we ignore any events in
902 * kernel space (but re-enable TF when returning to user mode).
904 if (condition
& DR_STEP
) {
906 * We already checked v86 mode above, so we can
907 * check for kernel mode by just checking the CPL
910 if (!user_mode(regs
))
911 goto clear_TF_reenable
;
914 /* Ok, finally something we can handle */
915 send_sigtrap(tsk
, regs
, error_code
);
917 /* Disable additional traps. They'll be re-enabled when
918 * the signal is delivered.
925 handle_vm86_trap((struct kernel_vm86_regs
*) regs
, error_code
, 1);
929 set_tsk_thread_flag(tsk
, TIF_SINGLESTEP
);
930 regs
->flags
&= ~TF_MASK
;
935 * Note that we play around with the 'TS' bit in an attempt to get
936 * the correct behaviour even in the presence of the asynchronous
939 void math_error(void __user
*ip
)
941 struct task_struct
* task
;
943 unsigned short cwd
, swd
;
946 * Save the info for the exception handler and clear the error.
950 task
->thread
.trap_no
= 16;
951 task
->thread
.error_code
= 0;
952 info
.si_signo
= SIGFPE
;
954 info
.si_code
= __SI_FAULT
;
957 * (~cwd & swd) will mask out exceptions that are not set to unmasked
958 * status. 0x3f is the exception bits in these regs, 0x200 is the
959 * C1 reg you need in case of a stack fault, 0x040 is the stack
960 * fault bit. We should only be taking one exception at a time,
961 * so if this combination doesn't produce any single exception,
962 * then we have a bad program that isn't syncronizing its FPU usage
963 * and it will suffer the consequences since we won't be able to
964 * fully reproduce the context of the exception
966 cwd
= get_fpu_cwd(task
);
967 swd
= get_fpu_swd(task
);
968 switch (swd
& ~cwd
& 0x3f) {
969 case 0x000: /* No unmasked exception */
971 default: /* Multiple exceptions */
973 case 0x001: /* Invalid Op */
975 * swd & 0x240 == 0x040: Stack Underflow
976 * swd & 0x240 == 0x240: Stack Overflow
977 * User must clear the SF bit (0x40) if set
979 info
.si_code
= FPE_FLTINV
;
981 case 0x002: /* Denormalize */
982 case 0x010: /* Underflow */
983 info
.si_code
= FPE_FLTUND
;
985 case 0x004: /* Zero Divide */
986 info
.si_code
= FPE_FLTDIV
;
988 case 0x008: /* Overflow */
989 info
.si_code
= FPE_FLTOVF
;
991 case 0x020: /* Precision */
992 info
.si_code
= FPE_FLTRES
;
995 force_sig_info(SIGFPE
, &info
, task
);
998 void do_coprocessor_error(struct pt_regs
* regs
, long error_code
)
1001 math_error((void __user
*)regs
->ip
);
1004 static void simd_math_error(void __user
*ip
)
1006 struct task_struct
* task
;
1008 unsigned short mxcsr
;
1011 * Save the info for the exception handler and clear the error.
1014 save_init_fpu(task
);
1015 task
->thread
.trap_no
= 19;
1016 task
->thread
.error_code
= 0;
1017 info
.si_signo
= SIGFPE
;
1019 info
.si_code
= __SI_FAULT
;
1022 * The SIMD FPU exceptions are handled a little differently, as there
1023 * is only a single status/control register. Thus, to determine which
1024 * unmasked exception was caught we must mask the exception mask bits
1025 * at 0x1f80, and then use these to mask the exception bits at 0x3f.
1027 mxcsr
= get_fpu_mxcsr(task
);
1028 switch (~((mxcsr
& 0x1f80) >> 7) & (mxcsr
& 0x3f)) {
1032 case 0x001: /* Invalid Op */
1033 info
.si_code
= FPE_FLTINV
;
1035 case 0x002: /* Denormalize */
1036 case 0x010: /* Underflow */
1037 info
.si_code
= FPE_FLTUND
;
1039 case 0x004: /* Zero Divide */
1040 info
.si_code
= FPE_FLTDIV
;
1042 case 0x008: /* Overflow */
1043 info
.si_code
= FPE_FLTOVF
;
1045 case 0x020: /* Precision */
1046 info
.si_code
= FPE_FLTRES
;
1049 force_sig_info(SIGFPE
, &info
, task
);
1052 void do_simd_coprocessor_error(struct pt_regs
* regs
,
1056 /* Handle SIMD FPU exceptions on PIII+ processors. */
1058 simd_math_error((void __user
*)regs
->ip
);
1061 * Handle strange cache flush from user space exception
1062 * in all other cases. This is undocumented behaviour.
1064 if (regs
->flags
& VM_MASK
) {
1065 handle_vm86_fault((struct kernel_vm86_regs
*)regs
,
1069 current
->thread
.trap_no
= 19;
1070 current
->thread
.error_code
= error_code
;
1071 die_if_kernel("cache flush denied", regs
, error_code
);
1072 force_sig(SIGSEGV
, current
);
1076 void do_spurious_interrupt_bug(struct pt_regs
* regs
,
1080 /* No need to warn about this any longer. */
1081 printk("Ignoring P6 Local APIC Spurious Interrupt Bug...\n");
1085 unsigned long patch_espfix_desc(unsigned long uesp
,
1088 struct desc_struct
*gdt
= __get_cpu_var(gdt_page
).gdt
;
1089 unsigned long base
= (kesp
- uesp
) & -THREAD_SIZE
;
1090 unsigned long new_kesp
= kesp
- base
;
1091 unsigned long lim_pages
= (new_kesp
| (THREAD_SIZE
- 1)) >> PAGE_SHIFT
;
1092 __u64 desc
= *(__u64
*)&gdt
[GDT_ENTRY_ESPFIX_SS
];
1093 /* Set up base for espfix segment */
1094 desc
&= 0x00f0ff0000000000ULL
;
1095 desc
|= ((((__u64
)base
) << 16) & 0x000000ffffff0000ULL
) |
1096 ((((__u64
)base
) << 32) & 0xff00000000000000ULL
) |
1097 ((((__u64
)lim_pages
) << 32) & 0x000f000000000000ULL
) |
1098 (lim_pages
& 0xffff);
1099 *(__u64
*)&gdt
[GDT_ENTRY_ESPFIX_SS
] = desc
;
1104 * 'math_state_restore()' saves the current math information in the
1105 * old math state array, and gets the new ones from the current task
1107 * Careful.. There are problems with IBM-designed IRQ13 behaviour.
1108 * Don't touch unless you *really* know how it works.
1110 * Must be called with kernel preemption disabled (in this case,
1111 * local interrupts are disabled at the call-site in entry.S).
1113 asmlinkage
void math_state_restore(void)
1115 struct thread_info
*thread
= current_thread_info();
1116 struct task_struct
*tsk
= thread
->task
;
1118 clts(); /* Allow maths ops (or we recurse) */
1119 if (!tsk_used_math(tsk
))
1122 thread
->status
|= TS_USEDFPU
; /* So we fnsave on switch_to() */
1125 EXPORT_SYMBOL_GPL(math_state_restore
);
1127 #ifndef CONFIG_MATH_EMULATION
1129 asmlinkage
void math_emulate(long arg
)
1131 printk(KERN_EMERG
"math-emulation not enabled and no coprocessor found.\n");
1132 printk(KERN_EMERG
"killing %s.\n",current
->comm
);
1133 force_sig(SIGFPE
,current
);
1137 #endif /* CONFIG_MATH_EMULATION */
1140 void __init
trap_init(void)
1145 void __iomem
*p
= early_ioremap(0x0FFFD9, 4);
1146 if (readl(p
) == 'E'+('I'<<8)+('S'<<16)+('A'<<24)) {
1149 early_iounmap(p
, 4);
1152 #ifdef CONFIG_X86_LOCAL_APIC
1153 init_apic_mappings();
1156 set_trap_gate(0,÷_error
);
1157 set_intr_gate(1,&debug
);
1158 set_intr_gate(2,&nmi
);
1159 set_system_intr_gate(3, &int3
); /* int3/4 can be called from all */
1160 set_system_gate(4,&overflow
);
1161 set_trap_gate(5,&bounds
);
1162 set_trap_gate(6,&invalid_op
);
1163 set_trap_gate(7,&device_not_available
);
1164 set_task_gate(8,GDT_ENTRY_DOUBLEFAULT_TSS
);
1165 set_trap_gate(9,&coprocessor_segment_overrun
);
1166 set_trap_gate(10,&invalid_TSS
);
1167 set_trap_gate(11,&segment_not_present
);
1168 set_trap_gate(12,&stack_segment
);
1169 set_trap_gate(13,&general_protection
);
1170 set_intr_gate(14,&page_fault
);
1171 set_trap_gate(15,&spurious_interrupt_bug
);
1172 set_trap_gate(16,&coprocessor_error
);
1173 set_trap_gate(17,&alignment_check
);
1174 #ifdef CONFIG_X86_MCE
1175 set_trap_gate(18,&machine_check
);
1177 set_trap_gate(19,&simd_coprocessor_error
);
1180 * Verify that the FXSAVE/FXRSTOR data will be 16-byte aligned.
1181 * Generate a build-time error if the alignment is wrong.
1183 BUILD_BUG_ON(offsetof(struct task_struct
, thread
.i387
.fxsave
) & 15);
1185 printk(KERN_INFO
"Enabling fast FPU save and restore... ");
1186 set_in_cr4(X86_CR4_OSFXSR
);
1190 printk(KERN_INFO
"Enabling unmasked SIMD FPU exception "
1192 set_in_cr4(X86_CR4_OSXMMEXCPT
);
1196 set_system_gate(SYSCALL_VECTOR
,&system_call
);
1198 /* Reserve all the builtin and the syscall vector. */
1199 for (i
= 0; i
< FIRST_EXTERNAL_VECTOR
; i
++)
1200 set_bit(i
, used_vectors
);
1201 set_bit(SYSCALL_VECTOR
, used_vectors
);
1204 * Should be a barrier for any external CPU state.
1211 static int __init
kstack_setup(char *s
)
1213 kstack_depth_to_print
= simple_strtoul(s
, NULL
, 0);
1216 __setup("kstack=", kstack_setup
);
1218 static int __init
code_bytes_setup(char *s
)
1220 code_bytes
= simple_strtoul(s
, NULL
, 0);
1221 if (code_bytes
> 8192)
1226 __setup("code_bytes=", code_bytes_setup
);