2 * Adaptec AAC series RAID controller driver
3 * (c) Copyright 2001 Red Hat Inc. <alan@redhat.com>
5 * based on the old aacraid driver that is..
6 * Adaptec aacraid device driver for Linux.
8 * Copyright (c) 2000-2007 Adaptec, Inc. (aacraid@adaptec.com)
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2, or (at your option)
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
20 * You should have received a copy of the GNU General Public License
21 * along with this program; see the file COPYING. If not, write to
22 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
26 #include <linux/kernel.h>
27 #include <linux/init.h>
28 #include <linux/types.h>
29 #include <linux/pci.h>
30 #include <linux/spinlock.h>
31 #include <linux/slab.h>
32 #include <linux/completion.h>
33 #include <linux/blkdev.h>
34 #include <asm/semaphore.h>
35 #include <asm/uaccess.h>
36 #include <linux/highmem.h> /* For flush_kernel_dcache_page */
38 #include <scsi/scsi.h>
39 #include <scsi/scsi_cmnd.h>
40 #include <scsi/scsi_device.h>
41 #include <scsi/scsi_host.h>
45 /* values for inqd_pdt: Peripheral device type in plain English */
46 #define INQD_PDT_DA 0x00 /* Direct-access (DISK) device */
47 #define INQD_PDT_PROC 0x03 /* Processor device */
48 #define INQD_PDT_CHNGR 0x08 /* Changer (jukebox, scsi2) */
49 #define INQD_PDT_COMM 0x09 /* Communication device (scsi2) */
50 #define INQD_PDT_NOLUN2 0x1f /* Unknown Device (scsi2) */
51 #define INQD_PDT_NOLUN 0x7f /* Logical Unit Not Present */
53 #define INQD_PDT_DMASK 0x1F /* Peripheral Device Type Mask */
54 #define INQD_PDT_QMASK 0xE0 /* Peripheral Device Qualifer Mask */
60 #define SENCODE_NO_SENSE 0x00
61 #define SENCODE_END_OF_DATA 0x00
62 #define SENCODE_BECOMING_READY 0x04
63 #define SENCODE_INIT_CMD_REQUIRED 0x04
64 #define SENCODE_PARAM_LIST_LENGTH_ERROR 0x1A
65 #define SENCODE_INVALID_COMMAND 0x20
66 #define SENCODE_LBA_OUT_OF_RANGE 0x21
67 #define SENCODE_INVALID_CDB_FIELD 0x24
68 #define SENCODE_LUN_NOT_SUPPORTED 0x25
69 #define SENCODE_INVALID_PARAM_FIELD 0x26
70 #define SENCODE_PARAM_NOT_SUPPORTED 0x26
71 #define SENCODE_PARAM_VALUE_INVALID 0x26
72 #define SENCODE_RESET_OCCURRED 0x29
73 #define SENCODE_LUN_NOT_SELF_CONFIGURED_YET 0x3E
74 #define SENCODE_INQUIRY_DATA_CHANGED 0x3F
75 #define SENCODE_SAVING_PARAMS_NOT_SUPPORTED 0x39
76 #define SENCODE_DIAGNOSTIC_FAILURE 0x40
77 #define SENCODE_INTERNAL_TARGET_FAILURE 0x44
78 #define SENCODE_INVALID_MESSAGE_ERROR 0x49
79 #define SENCODE_LUN_FAILED_SELF_CONFIG 0x4c
80 #define SENCODE_OVERLAPPED_COMMAND 0x4E
83 * Additional sense codes
86 #define ASENCODE_NO_SENSE 0x00
87 #define ASENCODE_END_OF_DATA 0x05
88 #define ASENCODE_BECOMING_READY 0x01
89 #define ASENCODE_INIT_CMD_REQUIRED 0x02
90 #define ASENCODE_PARAM_LIST_LENGTH_ERROR 0x00
91 #define ASENCODE_INVALID_COMMAND 0x00
92 #define ASENCODE_LBA_OUT_OF_RANGE 0x00
93 #define ASENCODE_INVALID_CDB_FIELD 0x00
94 #define ASENCODE_LUN_NOT_SUPPORTED 0x00
95 #define ASENCODE_INVALID_PARAM_FIELD 0x00
96 #define ASENCODE_PARAM_NOT_SUPPORTED 0x01
97 #define ASENCODE_PARAM_VALUE_INVALID 0x02
98 #define ASENCODE_RESET_OCCURRED 0x00
99 #define ASENCODE_LUN_NOT_SELF_CONFIGURED_YET 0x00
100 #define ASENCODE_INQUIRY_DATA_CHANGED 0x03
101 #define ASENCODE_SAVING_PARAMS_NOT_SUPPORTED 0x00
102 #define ASENCODE_DIAGNOSTIC_FAILURE 0x80
103 #define ASENCODE_INTERNAL_TARGET_FAILURE 0x00
104 #define ASENCODE_INVALID_MESSAGE_ERROR 0x00
105 #define ASENCODE_LUN_FAILED_SELF_CONFIG 0x00
106 #define ASENCODE_OVERLAPPED_COMMAND 0x00
108 #define BYTE0(x) (unsigned char)(x)
109 #define BYTE1(x) (unsigned char)((x) >> 8)
110 #define BYTE2(x) (unsigned char)((x) >> 16)
111 #define BYTE3(x) (unsigned char)((x) >> 24)
113 /*------------------------------------------------------------------------------
114 * S T R U C T S / T Y P E D E F S
115 *----------------------------------------------------------------------------*/
116 /* SCSI inquiry data */
117 struct inquiry_data
{
118 u8 inqd_pdt
; /* Peripheral qualifier | Peripheral Device Type */
119 u8 inqd_dtq
; /* RMB | Device Type Qualifier */
120 u8 inqd_ver
; /* ISO version | ECMA version | ANSI-approved version */
121 u8 inqd_rdf
; /* AENC | TrmIOP | Response data format */
122 u8 inqd_len
; /* Additional length (n-4) */
123 u8 inqd_pad1
[2];/* Reserved - must be zero */
124 u8 inqd_pad2
; /* RelAdr | WBus32 | WBus16 | Sync | Linked |Reserved| CmdQue | SftRe */
125 u8 inqd_vid
[8]; /* Vendor ID */
126 u8 inqd_pid
[16];/* Product ID */
127 u8 inqd_prl
[4]; /* Product Revision Level */
131 * M O D U L E G L O B A L S
134 static unsigned long aac_build_sg(struct scsi_cmnd
* scsicmd
, struct sgmap
* sgmap
);
135 static unsigned long aac_build_sg64(struct scsi_cmnd
* scsicmd
, struct sgmap64
* psg
);
136 static unsigned long aac_build_sgraw(struct scsi_cmnd
* scsicmd
, struct sgmapraw
* psg
);
137 static int aac_send_srb_fib(struct scsi_cmnd
* scsicmd
);
138 #ifdef AAC_DETAILED_STATUS_INFO
139 static char *aac_get_status_string(u32 status
);
143 * Non dasd selection is handled entirely in aachba now
146 static int nondasd
= -1;
147 static int aac_cache
;
148 static int dacmode
= -1;
151 int startup_timeout
= 180;
152 int aif_timeout
= 120;
154 module_param(nondasd
, int, S_IRUGO
|S_IWUSR
);
155 MODULE_PARM_DESC(nondasd
, "Control scanning of hba for nondasd devices."
157 module_param_named(cache
, aac_cache
, int, S_IRUGO
|S_IWUSR
);
158 MODULE_PARM_DESC(cache
, "Disable Queue Flush commands:\n"
159 "\tbit 0 - Disable FUA in WRITE SCSI commands\n"
160 "\tbit 1 - Disable SYNCHRONIZE_CACHE SCSI command\n"
161 "\tbit 2 - Disable only if Battery not protecting Cache");
162 module_param(dacmode
, int, S_IRUGO
|S_IWUSR
);
163 MODULE_PARM_DESC(dacmode
, "Control whether dma addressing is using 64 bit DAC."
165 module_param_named(commit
, aac_commit
, int, S_IRUGO
|S_IWUSR
);
166 MODULE_PARM_DESC(commit
, "Control whether a COMMIT_CONFIG is issued to the"
167 " adapter for foreign arrays.\n"
168 "This is typically needed in systems that do not have a BIOS."
170 module_param_named(msi
, aac_msi
, int, S_IRUGO
|S_IWUSR
);
171 MODULE_PARM_DESC(msi
, "IRQ handling."
172 " 0=PIC(default), 1=MSI, 2=MSI-X(unsupported, uses MSI)");
173 module_param(startup_timeout
, int, S_IRUGO
|S_IWUSR
);
174 MODULE_PARM_DESC(startup_timeout
, "The duration of time in seconds to wait for"
175 " adapter to have it's kernel up and\n"
176 "running. This is typically adjusted for large systems that do not"
178 module_param(aif_timeout
, int, S_IRUGO
|S_IWUSR
);
179 MODULE_PARM_DESC(aif_timeout
, "The duration of time in seconds to wait for"
180 " applications to pick up AIFs before\n"
181 "deregistering them. This is typically adjusted for heavily burdened"
185 module_param(numacb
, int, S_IRUGO
|S_IWUSR
);
186 MODULE_PARM_DESC(numacb
, "Request a limit to the number of adapter control"
187 " blocks (FIB) allocated. Valid values are 512 and down. Default is"
188 " to use suggestion from Firmware.");
191 module_param(acbsize
, int, S_IRUGO
|S_IWUSR
);
192 MODULE_PARM_DESC(acbsize
, "Request a specific adapter control block (FIB)"
193 " size. Valid values are 512, 2048, 4096 and 8192. Default is to use"
194 " suggestion from Firmware.");
196 int update_interval
= 30 * 60;
197 module_param(update_interval
, int, S_IRUGO
|S_IWUSR
);
198 MODULE_PARM_DESC(update_interval
, "Interval in seconds between time sync"
199 " updates issued to adapter.");
201 int check_interval
= 24 * 60 * 60;
202 module_param(check_interval
, int, S_IRUGO
|S_IWUSR
);
203 MODULE_PARM_DESC(check_interval
, "Interval in seconds between adapter health"
206 int aac_check_reset
= 1;
207 module_param_named(check_reset
, aac_check_reset
, int, S_IRUGO
|S_IWUSR
);
208 MODULE_PARM_DESC(aac_check_reset
, "If adapter fails health check, reset the"
209 " adapter. a value of -1 forces the reset to adapters programmed to"
212 int expose_physicals
= -1;
213 module_param(expose_physicals
, int, S_IRUGO
|S_IWUSR
);
214 MODULE_PARM_DESC(expose_physicals
, "Expose physical components of the arrays."
215 " -1=protect 0=off, 1=on");
217 int aac_reset_devices
;
218 module_param_named(reset_devices
, aac_reset_devices
, int, S_IRUGO
|S_IWUSR
);
219 MODULE_PARM_DESC(reset_devices
, "Force an adapter reset at initialization.");
221 static inline int aac_valid_context(struct scsi_cmnd
*scsicmd
,
222 struct fib
*fibptr
) {
223 struct scsi_device
*device
;
225 if (unlikely(!scsicmd
|| !scsicmd
->scsi_done
)) {
226 dprintk((KERN_WARNING
"aac_valid_context: scsi command corrupt\n"));
227 aac_fib_complete(fibptr
);
228 aac_fib_free(fibptr
);
231 scsicmd
->SCp
.phase
= AAC_OWNER_MIDLEVEL
;
232 device
= scsicmd
->device
;
233 if (unlikely(!device
|| !scsi_device_online(device
))) {
234 dprintk((KERN_WARNING
"aac_valid_context: scsi device corrupt\n"));
235 aac_fib_complete(fibptr
);
236 aac_fib_free(fibptr
);
243 * aac_get_config_status - check the adapter configuration
244 * @common: adapter to query
246 * Query config status, and commit the configuration if needed.
248 int aac_get_config_status(struct aac_dev
*dev
, int commit_flag
)
253 if (!(fibptr
= aac_fib_alloc(dev
)))
256 aac_fib_init(fibptr
);
258 struct aac_get_config_status
*dinfo
;
259 dinfo
= (struct aac_get_config_status
*) fib_data(fibptr
);
261 dinfo
->command
= cpu_to_le32(VM_ContainerConfig
);
262 dinfo
->type
= cpu_to_le32(CT_GET_CONFIG_STATUS
);
263 dinfo
->count
= cpu_to_le32(sizeof(((struct aac_get_config_status_resp
*)NULL
)->data
));
266 status
= aac_fib_send(ContainerCommand
,
268 sizeof (struct aac_get_config_status
),
273 printk(KERN_WARNING
"aac_get_config_status: SendFIB failed.\n");
275 struct aac_get_config_status_resp
*reply
276 = (struct aac_get_config_status_resp
*) fib_data(fibptr
);
277 dprintk((KERN_WARNING
278 "aac_get_config_status: response=%d status=%d action=%d\n",
279 le32_to_cpu(reply
->response
),
280 le32_to_cpu(reply
->status
),
281 le32_to_cpu(reply
->data
.action
)));
282 if ((le32_to_cpu(reply
->response
) != ST_OK
) ||
283 (le32_to_cpu(reply
->status
) != CT_OK
) ||
284 (le32_to_cpu(reply
->data
.action
) > CFACT_PAUSE
)) {
285 printk(KERN_WARNING
"aac_get_config_status: Will not issue the Commit Configuration\n");
289 aac_fib_complete(fibptr
);
290 /* Send a CT_COMMIT_CONFIG to enable discovery of devices */
292 if ((aac_commit
== 1) || commit_flag
) {
293 struct aac_commit_config
* dinfo
;
294 aac_fib_init(fibptr
);
295 dinfo
= (struct aac_commit_config
*) fib_data(fibptr
);
297 dinfo
->command
= cpu_to_le32(VM_ContainerConfig
);
298 dinfo
->type
= cpu_to_le32(CT_COMMIT_CONFIG
);
300 status
= aac_fib_send(ContainerCommand
,
302 sizeof (struct aac_commit_config
),
306 aac_fib_complete(fibptr
);
307 } else if (aac_commit
== 0) {
309 "aac_get_config_status: Foreign device configurations are being ignored\n");
312 aac_fib_free(fibptr
);
317 * aac_get_containers - list containers
318 * @common: adapter to probe
320 * Make a list of all containers on this controller
322 int aac_get_containers(struct aac_dev
*dev
)
324 struct fsa_dev_info
*fsa_dev_ptr
;
328 struct aac_get_container_count
*dinfo
;
329 struct aac_get_container_count_resp
*dresp
;
330 int maximum_num_containers
= MAXIMUM_NUM_CONTAINERS
;
332 if (!(fibptr
= aac_fib_alloc(dev
)))
335 aac_fib_init(fibptr
);
336 dinfo
= (struct aac_get_container_count
*) fib_data(fibptr
);
337 dinfo
->command
= cpu_to_le32(VM_ContainerConfig
);
338 dinfo
->type
= cpu_to_le32(CT_GET_CONTAINER_COUNT
);
340 status
= aac_fib_send(ContainerCommand
,
342 sizeof (struct aac_get_container_count
),
347 dresp
= (struct aac_get_container_count_resp
*)fib_data(fibptr
);
348 maximum_num_containers
= le32_to_cpu(dresp
->ContainerSwitchEntries
);
349 aac_fib_complete(fibptr
);
351 aac_fib_free(fibptr
);
353 if (maximum_num_containers
< MAXIMUM_NUM_CONTAINERS
)
354 maximum_num_containers
= MAXIMUM_NUM_CONTAINERS
;
355 fsa_dev_ptr
= kzalloc(sizeof(*fsa_dev_ptr
) * maximum_num_containers
,
360 dev
->fsa_dev
= fsa_dev_ptr
;
361 dev
->maximum_num_containers
= maximum_num_containers
;
363 for (index
= 0; index
< dev
->maximum_num_containers
; ) {
364 fsa_dev_ptr
[index
].devname
[0] = '\0';
366 status
= aac_probe_container(dev
, index
);
369 printk(KERN_WARNING
"aac_get_containers: SendFIB failed.\n");
374 * If there are no more containers, then stop asking.
376 if (++index
>= status
)
382 static void aac_internal_transfer(struct scsi_cmnd
*scsicmd
, void *data
, unsigned int offset
, unsigned int len
)
386 struct scatterlist
*sg
= scsi_sglist(scsicmd
);
388 buf
= kmap_atomic(sg_page(sg
), KM_IRQ0
) + sg
->offset
;
389 transfer_len
= min(sg
->length
, len
+ offset
);
391 transfer_len
-= offset
;
392 if (buf
&& transfer_len
> 0)
393 memcpy(buf
+ offset
, data
, transfer_len
);
395 flush_kernel_dcache_page(kmap_atomic_to_page(buf
- sg
->offset
));
396 kunmap_atomic(buf
- sg
->offset
, KM_IRQ0
);
400 static void get_container_name_callback(void *context
, struct fib
* fibptr
)
402 struct aac_get_name_resp
* get_name_reply
;
403 struct scsi_cmnd
* scsicmd
;
405 scsicmd
= (struct scsi_cmnd
*) context
;
407 if (!aac_valid_context(scsicmd
, fibptr
))
410 dprintk((KERN_DEBUG
"get_container_name_callback[cpu %d]: t = %ld.\n", smp_processor_id(), jiffies
));
411 BUG_ON(fibptr
== NULL
);
413 get_name_reply
= (struct aac_get_name_resp
*) fib_data(fibptr
);
414 /* Failure is irrelevant, using default value instead */
415 if ((le32_to_cpu(get_name_reply
->status
) == CT_OK
)
416 && (get_name_reply
->data
[0] != '\0')) {
417 char *sp
= get_name_reply
->data
;
418 sp
[sizeof(((struct aac_get_name_resp
*)NULL
)->data
)-1] = '\0';
422 char d
[sizeof(((struct inquiry_data
*)NULL
)->inqd_pid
)];
423 int count
= sizeof(d
);
426 *dp
++ = (*sp
) ? *sp
++ : ' ';
427 } while (--count
> 0);
428 aac_internal_transfer(scsicmd
, d
,
429 offsetof(struct inquiry_data
, inqd_pid
), sizeof(d
));
433 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_GOOD
;
435 aac_fib_complete(fibptr
);
436 aac_fib_free(fibptr
);
437 scsicmd
->scsi_done(scsicmd
);
441 * aac_get_container_name - get container name, none blocking.
443 static int aac_get_container_name(struct scsi_cmnd
* scsicmd
)
446 struct aac_get_name
*dinfo
;
447 struct fib
* cmd_fibcontext
;
448 struct aac_dev
* dev
;
450 dev
= (struct aac_dev
*)scsicmd
->device
->host
->hostdata
;
452 if (!(cmd_fibcontext
= aac_fib_alloc(dev
)))
455 aac_fib_init(cmd_fibcontext
);
456 dinfo
= (struct aac_get_name
*) fib_data(cmd_fibcontext
);
458 dinfo
->command
= cpu_to_le32(VM_ContainerConfig
);
459 dinfo
->type
= cpu_to_le32(CT_READ_NAME
);
460 dinfo
->cid
= cpu_to_le32(scmd_id(scsicmd
));
461 dinfo
->count
= cpu_to_le32(sizeof(((struct aac_get_name_resp
*)NULL
)->data
));
463 status
= aac_fib_send(ContainerCommand
,
465 sizeof (struct aac_get_name
),
468 (fib_callback
)get_container_name_callback
,
472 * Check that the command queued to the controller
474 if (status
== -EINPROGRESS
) {
475 scsicmd
->SCp
.phase
= AAC_OWNER_FIRMWARE
;
479 printk(KERN_WARNING
"aac_get_container_name: aac_fib_send failed with status: %d.\n", status
);
480 aac_fib_complete(cmd_fibcontext
);
481 aac_fib_free(cmd_fibcontext
);
485 static int aac_probe_container_callback2(struct scsi_cmnd
* scsicmd
)
487 struct fsa_dev_info
*fsa_dev_ptr
= ((struct aac_dev
*)(scsicmd
->device
->host
->hostdata
))->fsa_dev
;
489 if ((fsa_dev_ptr
[scmd_id(scsicmd
)].valid
& 1))
490 return aac_scsi_cmd(scsicmd
);
492 scsicmd
->result
= DID_NO_CONNECT
<< 16;
493 scsicmd
->scsi_done(scsicmd
);
497 static void _aac_probe_container2(void * context
, struct fib
* fibptr
)
499 struct fsa_dev_info
*fsa_dev_ptr
;
500 int (*callback
)(struct scsi_cmnd
*);
501 struct scsi_cmnd
* scsicmd
= (struct scsi_cmnd
*)context
;
504 if (!aac_valid_context(scsicmd
, fibptr
))
507 scsicmd
->SCp
.Status
= 0;
508 fsa_dev_ptr
= fibptr
->dev
->fsa_dev
;
510 struct aac_mount
* dresp
= (struct aac_mount
*) fib_data(fibptr
);
511 fsa_dev_ptr
+= scmd_id(scsicmd
);
513 if ((le32_to_cpu(dresp
->status
) == ST_OK
) &&
514 (le32_to_cpu(dresp
->mnt
[0].vol
) != CT_NONE
) &&
515 (le32_to_cpu(dresp
->mnt
[0].state
) != FSCS_HIDDEN
)) {
516 fsa_dev_ptr
->valid
= 1;
517 fsa_dev_ptr
->type
= le32_to_cpu(dresp
->mnt
[0].vol
);
519 = ((u64
)le32_to_cpu(dresp
->mnt
[0].capacity
)) +
520 (((u64
)le32_to_cpu(dresp
->mnt
[0].capacityhigh
)) << 32);
521 fsa_dev_ptr
->ro
= ((le32_to_cpu(dresp
->mnt
[0].state
) & FSCS_READONLY
) != 0);
523 if ((fsa_dev_ptr
->valid
& 1) == 0)
524 fsa_dev_ptr
->valid
= 0;
525 scsicmd
->SCp
.Status
= le32_to_cpu(dresp
->count
);
527 aac_fib_complete(fibptr
);
528 aac_fib_free(fibptr
);
529 callback
= (int (*)(struct scsi_cmnd
*))(scsicmd
->SCp
.ptr
);
530 scsicmd
->SCp
.ptr
= NULL
;
531 (*callback
)(scsicmd
);
535 static void _aac_probe_container1(void * context
, struct fib
* fibptr
)
537 struct scsi_cmnd
* scsicmd
;
538 struct aac_mount
* dresp
;
539 struct aac_query_mount
*dinfo
;
542 dresp
= (struct aac_mount
*) fib_data(fibptr
);
543 dresp
->mnt
[0].capacityhigh
= 0;
544 if ((le32_to_cpu(dresp
->status
) != ST_OK
) ||
545 (le32_to_cpu(dresp
->mnt
[0].vol
) != CT_NONE
)) {
546 _aac_probe_container2(context
, fibptr
);
549 scsicmd
= (struct scsi_cmnd
*) context
;
551 if (!aac_valid_context(scsicmd
, fibptr
))
554 aac_fib_init(fibptr
);
556 dinfo
= (struct aac_query_mount
*)fib_data(fibptr
);
558 dinfo
->command
= cpu_to_le32(VM_NameServe64
);
559 dinfo
->count
= cpu_to_le32(scmd_id(scsicmd
));
560 dinfo
->type
= cpu_to_le32(FT_FILESYS
);
562 status
= aac_fib_send(ContainerCommand
,
564 sizeof(struct aac_query_mount
),
567 _aac_probe_container2
,
570 * Check that the command queued to the controller
572 if (status
== -EINPROGRESS
)
573 scsicmd
->SCp
.phase
= AAC_OWNER_FIRMWARE
;
574 else if (status
< 0) {
575 /* Inherit results from VM_NameServe, if any */
576 dresp
->status
= cpu_to_le32(ST_OK
);
577 _aac_probe_container2(context
, fibptr
);
581 static int _aac_probe_container(struct scsi_cmnd
* scsicmd
, int (*callback
)(struct scsi_cmnd
*))
584 int status
= -ENOMEM
;
586 if ((fibptr
= aac_fib_alloc((struct aac_dev
*)scsicmd
->device
->host
->hostdata
))) {
587 struct aac_query_mount
*dinfo
;
589 aac_fib_init(fibptr
);
591 dinfo
= (struct aac_query_mount
*)fib_data(fibptr
);
593 dinfo
->command
= cpu_to_le32(VM_NameServe
);
594 dinfo
->count
= cpu_to_le32(scmd_id(scsicmd
));
595 dinfo
->type
= cpu_to_le32(FT_FILESYS
);
596 scsicmd
->SCp
.ptr
= (char *)callback
;
598 status
= aac_fib_send(ContainerCommand
,
600 sizeof(struct aac_query_mount
),
603 _aac_probe_container1
,
606 * Check that the command queued to the controller
608 if (status
== -EINPROGRESS
) {
609 scsicmd
->SCp
.phase
= AAC_OWNER_FIRMWARE
;
613 scsicmd
->SCp
.ptr
= NULL
;
614 aac_fib_complete(fibptr
);
615 aac_fib_free(fibptr
);
619 struct fsa_dev_info
*fsa_dev_ptr
= ((struct aac_dev
*)(scsicmd
->device
->host
->hostdata
))->fsa_dev
;
621 fsa_dev_ptr
+= scmd_id(scsicmd
);
622 if ((fsa_dev_ptr
->valid
& 1) == 0) {
623 fsa_dev_ptr
->valid
= 0;
624 return (*callback
)(scsicmd
);
632 * aac_probe_container - query a logical volume
633 * @dev: device to query
634 * @cid: container identifier
636 * Queries the controller about the given volume. The volume information
637 * is updated in the struct fsa_dev_info structure rather than returned.
639 static int aac_probe_container_callback1(struct scsi_cmnd
* scsicmd
)
641 scsicmd
->device
= NULL
;
645 int aac_probe_container(struct aac_dev
*dev
, int cid
)
647 struct scsi_cmnd
*scsicmd
= kmalloc(sizeof(*scsicmd
), GFP_KERNEL
);
648 struct scsi_device
*scsidev
= kmalloc(sizeof(*scsidev
), GFP_KERNEL
);
651 if (!scsicmd
|| !scsidev
) {
656 scsicmd
->list
.next
= NULL
;
657 scsicmd
->scsi_done
= (void (*)(struct scsi_cmnd
*))aac_probe_container_callback1
;
659 scsicmd
->device
= scsidev
;
660 scsidev
->sdev_state
= 0;
662 scsidev
->host
= dev
->scsi_host_ptr
;
664 if (_aac_probe_container(scsicmd
, aac_probe_container_callback1
) == 0)
665 while (scsicmd
->device
== scsidev
)
668 status
= scsicmd
->SCp
.Status
;
673 /* Local Structure to set SCSI inquiry data strings */
675 char vid
[8]; /* Vendor ID */
676 char pid
[16]; /* Product ID */
677 char prl
[4]; /* Product Revision Level */
681 * InqStrCopy - string merge
682 * @a: string to copy from
683 * @b: string to copy to
685 * Copy a String from one location to another
689 static void inqstrcpy(char *a
, char *b
)
692 while (*a
!= (char)0)
696 static char *container_types
[] = {
720 char * get_container_type(unsigned tindex
)
722 if (tindex
>= ARRAY_SIZE(container_types
))
723 tindex
= ARRAY_SIZE(container_types
) - 1;
724 return container_types
[tindex
];
727 /* Function: setinqstr
729 * Arguments: [1] pointer to void [1] int
731 * Purpose: Sets SCSI inquiry data strings for vendor, product
732 * and revision level. Allows strings to be set in platform dependant
733 * files instead of in OS dependant driver source.
736 static void setinqstr(struct aac_dev
*dev
, void *data
, int tindex
)
738 struct scsi_inq
*str
;
740 str
= (struct scsi_inq
*)(data
); /* cast data to scsi inq block */
741 memset(str
, ' ', sizeof(*str
));
743 if (dev
->supplement_adapter_info
.AdapterTypeText
[0]) {
744 char * cp
= dev
->supplement_adapter_info
.AdapterTypeText
;
746 if ((cp
[0] == 'A') && (cp
[1] == 'O') && (cp
[2] == 'C'))
747 inqstrcpy("SMC", str
->vid
);
749 c
= sizeof(str
->vid
);
750 while (*cp
&& *cp
!= ' ' && --c
)
754 inqstrcpy (dev
->supplement_adapter_info
.AdapterTypeText
,
757 while (*cp
&& *cp
!= ' ')
762 /* last six chars reserved for vol type */
764 if (strlen(cp
) > sizeof(str
->pid
)) {
765 c
= cp
[sizeof(str
->pid
)];
766 cp
[sizeof(str
->pid
)] = '\0';
768 inqstrcpy (cp
, str
->pid
);
770 cp
[sizeof(str
->pid
)] = c
;
772 struct aac_driver_ident
*mp
= aac_get_driver_ident(dev
->cardtype
);
774 inqstrcpy (mp
->vname
, str
->vid
);
775 /* last six chars reserved for vol type */
776 inqstrcpy (mp
->model
, str
->pid
);
779 if (tindex
< ARRAY_SIZE(container_types
)){
780 char *findit
= str
->pid
;
782 for ( ; *findit
!= ' '; findit
++); /* walk till we find a space */
783 /* RAID is superfluous in the context of a RAID device */
784 if (memcmp(findit
-4, "RAID", 4) == 0)
785 *(findit
-= 4) = ' ';
786 if (((findit
- str
->pid
) + strlen(container_types
[tindex
]))
787 < (sizeof(str
->pid
) + sizeof(str
->prl
)))
788 inqstrcpy (container_types
[tindex
], findit
+ 1);
790 inqstrcpy ("V1.0", str
->prl
);
793 static void get_container_serial_callback(void *context
, struct fib
* fibptr
)
795 struct aac_get_serial_resp
* get_serial_reply
;
796 struct scsi_cmnd
* scsicmd
;
798 BUG_ON(fibptr
== NULL
);
800 scsicmd
= (struct scsi_cmnd
*) context
;
801 if (!aac_valid_context(scsicmd
, fibptr
))
804 get_serial_reply
= (struct aac_get_serial_resp
*) fib_data(fibptr
);
805 /* Failure is irrelevant, using default value instead */
806 if (le32_to_cpu(get_serial_reply
->status
) == CT_OK
) {
810 sp
[1] = scsicmd
->cmnd
[2];
812 sp
[3] = snprintf(sp
+4, sizeof(sp
)-4, "%08X",
813 le32_to_cpu(get_serial_reply
->uid
));
814 aac_internal_transfer(scsicmd
, sp
, 0, sizeof(sp
));
817 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_GOOD
;
819 aac_fib_complete(fibptr
);
820 aac_fib_free(fibptr
);
821 scsicmd
->scsi_done(scsicmd
);
825 * aac_get_container_serial - get container serial, none blocking.
827 static int aac_get_container_serial(struct scsi_cmnd
* scsicmd
)
830 struct aac_get_serial
*dinfo
;
831 struct fib
* cmd_fibcontext
;
832 struct aac_dev
* dev
;
834 dev
= (struct aac_dev
*)scsicmd
->device
->host
->hostdata
;
836 if (!(cmd_fibcontext
= aac_fib_alloc(dev
)))
839 aac_fib_init(cmd_fibcontext
);
840 dinfo
= (struct aac_get_serial
*) fib_data(cmd_fibcontext
);
842 dinfo
->command
= cpu_to_le32(VM_ContainerConfig
);
843 dinfo
->type
= cpu_to_le32(CT_CID_TO_32BITS_UID
);
844 dinfo
->cid
= cpu_to_le32(scmd_id(scsicmd
));
846 status
= aac_fib_send(ContainerCommand
,
848 sizeof (struct aac_get_serial
),
851 (fib_callback
) get_container_serial_callback
,
855 * Check that the command queued to the controller
857 if (status
== -EINPROGRESS
) {
858 scsicmd
->SCp
.phase
= AAC_OWNER_FIRMWARE
;
862 printk(KERN_WARNING
"aac_get_container_serial: aac_fib_send failed with status: %d.\n", status
);
863 aac_fib_complete(cmd_fibcontext
);
864 aac_fib_free(cmd_fibcontext
);
868 /* Function: setinqserial
870 * Arguments: [1] pointer to void [1] int
872 * Purpose: Sets SCSI Unit Serial number.
873 * This is a fake. We should read a proper
874 * serial number from the container. <SuSE>But
875 * without docs it's quite hard to do it :-)
876 * So this will have to do in the meantime.</SuSE>
879 static int setinqserial(struct aac_dev
*dev
, void *data
, int cid
)
882 * This breaks array migration.
884 return snprintf((char *)(data
), sizeof(struct scsi_inq
) - 4, "%08X%02X",
885 le32_to_cpu(dev
->adapter_info
.serial
[0]), cid
);
888 static inline void set_sense(struct sense_data
*sense_data
, u8 sense_key
,
889 u8 sense_code
, u8 a_sense_code
, u8 bit_pointer
, u16 field_pointer
)
891 u8
*sense_buf
= (u8
*)sense_data
;
892 /* Sense data valid, err code 70h */
893 sense_buf
[0] = 0x70; /* No info field */
894 sense_buf
[1] = 0; /* Segment number, always zero */
896 sense_buf
[2] = sense_key
; /* Sense key */
898 sense_buf
[12] = sense_code
; /* Additional sense code */
899 sense_buf
[13] = a_sense_code
; /* Additional sense code qualifier */
901 if (sense_key
== ILLEGAL_REQUEST
) {
902 sense_buf
[7] = 10; /* Additional sense length */
904 sense_buf
[15] = bit_pointer
;
905 /* Illegal parameter is in the parameter block */
906 if (sense_code
== SENCODE_INVALID_CDB_FIELD
)
907 sense_buf
[15] |= 0xc0;/* Std sense key specific field */
908 /* Illegal parameter is in the CDB block */
909 sense_buf
[16] = field_pointer
>> 8; /* MSB */
910 sense_buf
[17] = field_pointer
; /* LSB */
912 sense_buf
[7] = 6; /* Additional sense length */
915 static int aac_bounds_32(struct aac_dev
* dev
, struct scsi_cmnd
* cmd
, u64 lba
)
917 if (lba
& 0xffffffff00000000LL
) {
918 int cid
= scmd_id(cmd
);
919 dprintk((KERN_DEBUG
"aacraid: Illegal lba\n"));
920 cmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 |
921 SAM_STAT_CHECK_CONDITION
;
922 set_sense(&dev
->fsa_dev
[cid
].sense_data
,
923 HARDWARE_ERROR
, SENCODE_INTERNAL_TARGET_FAILURE
,
924 ASENCODE_INTERNAL_TARGET_FAILURE
, 0, 0);
925 memcpy(cmd
->sense_buffer
, &dev
->fsa_dev
[cid
].sense_data
,
926 min_t(size_t, sizeof(dev
->fsa_dev
[cid
].sense_data
),
927 SCSI_SENSE_BUFFERSIZE
));
934 static int aac_bounds_64(struct aac_dev
* dev
, struct scsi_cmnd
* cmd
, u64 lba
)
939 static void io_callback(void *context
, struct fib
* fibptr
);
941 static int aac_read_raw_io(struct fib
* fib
, struct scsi_cmnd
* cmd
, u64 lba
, u32 count
)
944 struct aac_raw_io
*readcmd
;
946 readcmd
= (struct aac_raw_io
*) fib_data(fib
);
947 readcmd
->block
[0] = cpu_to_le32((u32
)(lba
&0xffffffff));
948 readcmd
->block
[1] = cpu_to_le32((u32
)((lba
&0xffffffff00000000LL
)>>32));
949 readcmd
->count
= cpu_to_le32(count
<<9);
950 readcmd
->cid
= cpu_to_le16(scmd_id(cmd
));
951 readcmd
->flags
= cpu_to_le16(IO_TYPE_READ
);
952 readcmd
->bpTotal
= 0;
953 readcmd
->bpComplete
= 0;
955 aac_build_sgraw(cmd
, &readcmd
->sg
);
956 fibsize
= sizeof(struct aac_raw_io
) + ((le32_to_cpu(readcmd
->sg
.count
) - 1) * sizeof (struct sgentryraw
));
957 BUG_ON(fibsize
> (fib
->dev
->max_fib_size
- sizeof(struct aac_fibhdr
)));
959 * Now send the Fib to the adapter
961 return aac_fib_send(ContainerRawIo
,
966 (fib_callback
) io_callback
,
970 static int aac_read_block64(struct fib
* fib
, struct scsi_cmnd
* cmd
, u64 lba
, u32 count
)
973 struct aac_read64
*readcmd
;
975 readcmd
= (struct aac_read64
*) fib_data(fib
);
976 readcmd
->command
= cpu_to_le32(VM_CtHostRead64
);
977 readcmd
->cid
= cpu_to_le16(scmd_id(cmd
));
978 readcmd
->sector_count
= cpu_to_le16(count
);
979 readcmd
->block
= cpu_to_le32((u32
)(lba
&0xffffffff));
983 aac_build_sg64(cmd
, &readcmd
->sg
);
984 fibsize
= sizeof(struct aac_read64
) +
985 ((le32_to_cpu(readcmd
->sg
.count
) - 1) *
986 sizeof (struct sgentry64
));
987 BUG_ON (fibsize
> (fib
->dev
->max_fib_size
-
988 sizeof(struct aac_fibhdr
)));
990 * Now send the Fib to the adapter
992 return aac_fib_send(ContainerCommand64
,
997 (fib_callback
) io_callback
,
1001 static int aac_read_block(struct fib
* fib
, struct scsi_cmnd
* cmd
, u64 lba
, u32 count
)
1004 struct aac_read
*readcmd
;
1006 readcmd
= (struct aac_read
*) fib_data(fib
);
1007 readcmd
->command
= cpu_to_le32(VM_CtBlockRead
);
1008 readcmd
->cid
= cpu_to_le32(scmd_id(cmd
));
1009 readcmd
->block
= cpu_to_le32((u32
)(lba
&0xffffffff));
1010 readcmd
->count
= cpu_to_le32(count
* 512);
1012 aac_build_sg(cmd
, &readcmd
->sg
);
1013 fibsize
= sizeof(struct aac_read
) +
1014 ((le32_to_cpu(readcmd
->sg
.count
) - 1) *
1015 sizeof (struct sgentry
));
1016 BUG_ON (fibsize
> (fib
->dev
->max_fib_size
-
1017 sizeof(struct aac_fibhdr
)));
1019 * Now send the Fib to the adapter
1021 return aac_fib_send(ContainerCommand
,
1026 (fib_callback
) io_callback
,
1030 static int aac_write_raw_io(struct fib
* fib
, struct scsi_cmnd
* cmd
, u64 lba
, u32 count
, int fua
)
1033 struct aac_raw_io
*writecmd
;
1035 writecmd
= (struct aac_raw_io
*) fib_data(fib
);
1036 writecmd
->block
[0] = cpu_to_le32((u32
)(lba
&0xffffffff));
1037 writecmd
->block
[1] = cpu_to_le32((u32
)((lba
&0xffffffff00000000LL
)>>32));
1038 writecmd
->count
= cpu_to_le32(count
<<9);
1039 writecmd
->cid
= cpu_to_le16(scmd_id(cmd
));
1040 writecmd
->flags
= (fua
&& ((aac_cache
& 5) != 1) &&
1041 (((aac_cache
& 5) != 5) || !fib
->dev
->cache_protected
)) ?
1042 cpu_to_le16(IO_TYPE_WRITE
|IO_SUREWRITE
) :
1043 cpu_to_le16(IO_TYPE_WRITE
);
1044 writecmd
->bpTotal
= 0;
1045 writecmd
->bpComplete
= 0;
1047 aac_build_sgraw(cmd
, &writecmd
->sg
);
1048 fibsize
= sizeof(struct aac_raw_io
) + ((le32_to_cpu(writecmd
->sg
.count
) - 1) * sizeof (struct sgentryraw
));
1049 BUG_ON(fibsize
> (fib
->dev
->max_fib_size
- sizeof(struct aac_fibhdr
)));
1051 * Now send the Fib to the adapter
1053 return aac_fib_send(ContainerRawIo
,
1058 (fib_callback
) io_callback
,
1062 static int aac_write_block64(struct fib
* fib
, struct scsi_cmnd
* cmd
, u64 lba
, u32 count
, int fua
)
1065 struct aac_write64
*writecmd
;
1067 writecmd
= (struct aac_write64
*) fib_data(fib
);
1068 writecmd
->command
= cpu_to_le32(VM_CtHostWrite64
);
1069 writecmd
->cid
= cpu_to_le16(scmd_id(cmd
));
1070 writecmd
->sector_count
= cpu_to_le16(count
);
1071 writecmd
->block
= cpu_to_le32((u32
)(lba
&0xffffffff));
1073 writecmd
->flags
= 0;
1075 aac_build_sg64(cmd
, &writecmd
->sg
);
1076 fibsize
= sizeof(struct aac_write64
) +
1077 ((le32_to_cpu(writecmd
->sg
.count
) - 1) *
1078 sizeof (struct sgentry64
));
1079 BUG_ON (fibsize
> (fib
->dev
->max_fib_size
-
1080 sizeof(struct aac_fibhdr
)));
1082 * Now send the Fib to the adapter
1084 return aac_fib_send(ContainerCommand64
,
1089 (fib_callback
) io_callback
,
1093 static int aac_write_block(struct fib
* fib
, struct scsi_cmnd
* cmd
, u64 lba
, u32 count
, int fua
)
1096 struct aac_write
*writecmd
;
1098 writecmd
= (struct aac_write
*) fib_data(fib
);
1099 writecmd
->command
= cpu_to_le32(VM_CtBlockWrite
);
1100 writecmd
->cid
= cpu_to_le32(scmd_id(cmd
));
1101 writecmd
->block
= cpu_to_le32((u32
)(lba
&0xffffffff));
1102 writecmd
->count
= cpu_to_le32(count
* 512);
1103 writecmd
->sg
.count
= cpu_to_le32(1);
1104 /* ->stable is not used - it did mean which type of write */
1106 aac_build_sg(cmd
, &writecmd
->sg
);
1107 fibsize
= sizeof(struct aac_write
) +
1108 ((le32_to_cpu(writecmd
->sg
.count
) - 1) *
1109 sizeof (struct sgentry
));
1110 BUG_ON (fibsize
> (fib
->dev
->max_fib_size
-
1111 sizeof(struct aac_fibhdr
)));
1113 * Now send the Fib to the adapter
1115 return aac_fib_send(ContainerCommand
,
1120 (fib_callback
) io_callback
,
1124 static struct aac_srb
* aac_scsi_common(struct fib
* fib
, struct scsi_cmnd
* cmd
)
1126 struct aac_srb
* srbcmd
;
1131 switch(cmd
->sc_data_direction
){
1135 case DMA_BIDIRECTIONAL
:
1136 flag
= SRB_DataIn
| SRB_DataOut
;
1138 case DMA_FROM_DEVICE
:
1142 default: /* shuts up some versions of gcc */
1143 flag
= SRB_NoDataXfer
;
1147 srbcmd
= (struct aac_srb
*) fib_data(fib
);
1148 srbcmd
->function
= cpu_to_le32(SRBF_ExecuteScsi
);
1149 srbcmd
->channel
= cpu_to_le32(aac_logical_to_phys(scmd_channel(cmd
)));
1150 srbcmd
->id
= cpu_to_le32(scmd_id(cmd
));
1151 srbcmd
->lun
= cpu_to_le32(cmd
->device
->lun
);
1152 srbcmd
->flags
= cpu_to_le32(flag
);
1153 timeout
= cmd
->timeout_per_command
/HZ
;
1156 srbcmd
->timeout
= cpu_to_le32(timeout
); // timeout in seconds
1157 srbcmd
->retry_limit
= 0; /* Obsolete parameter */
1158 srbcmd
->cdb_size
= cpu_to_le32(cmd
->cmd_len
);
1162 static void aac_srb_callback(void *context
, struct fib
* fibptr
);
1164 static int aac_scsi_64(struct fib
* fib
, struct scsi_cmnd
* cmd
)
1167 struct aac_srb
* srbcmd
= aac_scsi_common(fib
, cmd
);
1169 aac_build_sg64(cmd
, (struct sgmap64
*) &srbcmd
->sg
);
1170 srbcmd
->count
= cpu_to_le32(scsi_bufflen(cmd
));
1172 memset(srbcmd
->cdb
, 0, sizeof(srbcmd
->cdb
));
1173 memcpy(srbcmd
->cdb
, cmd
->cmnd
, cmd
->cmd_len
);
1175 * Build Scatter/Gather list
1177 fibsize
= sizeof (struct aac_srb
) - sizeof (struct sgentry
) +
1178 ((le32_to_cpu(srbcmd
->sg
.count
) & 0xff) *
1179 sizeof (struct sgentry64
));
1180 BUG_ON (fibsize
> (fib
->dev
->max_fib_size
-
1181 sizeof(struct aac_fibhdr
)));
1184 * Now send the Fib to the adapter
1186 return aac_fib_send(ScsiPortCommand64
, fib
,
1187 fibsize
, FsaNormal
, 0, 1,
1188 (fib_callback
) aac_srb_callback
,
1192 static int aac_scsi_32(struct fib
* fib
, struct scsi_cmnd
* cmd
)
1195 struct aac_srb
* srbcmd
= aac_scsi_common(fib
, cmd
);
1197 aac_build_sg(cmd
, (struct sgmap
*)&srbcmd
->sg
);
1198 srbcmd
->count
= cpu_to_le32(scsi_bufflen(cmd
));
1200 memset(srbcmd
->cdb
, 0, sizeof(srbcmd
->cdb
));
1201 memcpy(srbcmd
->cdb
, cmd
->cmnd
, cmd
->cmd_len
);
1203 * Build Scatter/Gather list
1205 fibsize
= sizeof (struct aac_srb
) +
1206 (((le32_to_cpu(srbcmd
->sg
.count
) & 0xff) - 1) *
1207 sizeof (struct sgentry
));
1208 BUG_ON (fibsize
> (fib
->dev
->max_fib_size
-
1209 sizeof(struct aac_fibhdr
)));
1212 * Now send the Fib to the adapter
1214 return aac_fib_send(ScsiPortCommand
, fib
, fibsize
, FsaNormal
, 0, 1,
1215 (fib_callback
) aac_srb_callback
, (void *) cmd
);
1218 static int aac_scsi_32_64(struct fib
* fib
, struct scsi_cmnd
* cmd
)
1220 if ((sizeof(dma_addr_t
) > 4) &&
1221 (num_physpages
> (0xFFFFFFFFULL
>> PAGE_SHIFT
)) &&
1222 (fib
->dev
->adapter_info
.options
& AAC_OPT_SGMAP_HOST64
))
1224 return aac_scsi_32(fib
, cmd
);
1227 int aac_get_adapter_info(struct aac_dev
* dev
)
1232 struct aac_adapter_info
*info
;
1233 struct aac_bus_info
*command
;
1234 struct aac_bus_info_response
*bus_info
;
1236 if (!(fibptr
= aac_fib_alloc(dev
)))
1239 aac_fib_init(fibptr
);
1240 info
= (struct aac_adapter_info
*) fib_data(fibptr
);
1241 memset(info
,0,sizeof(*info
));
1243 rcode
= aac_fib_send(RequestAdapterInfo
,
1247 -1, 1, /* First `interrupt' command uses special wait */
1252 aac_fib_complete(fibptr
);
1253 aac_fib_free(fibptr
);
1256 memcpy(&dev
->adapter_info
, info
, sizeof(*info
));
1258 if (dev
->adapter_info
.options
& AAC_OPT_SUPPLEMENT_ADAPTER_INFO
) {
1259 struct aac_supplement_adapter_info
* sinfo
;
1261 aac_fib_init(fibptr
);
1263 sinfo
= (struct aac_supplement_adapter_info
*) fib_data(fibptr
);
1265 memset(sinfo
,0,sizeof(*sinfo
));
1267 rcode
= aac_fib_send(RequestSupplementAdapterInfo
,
1276 memcpy(&dev
->supplement_adapter_info
, sinfo
, sizeof(*sinfo
));
1284 aac_fib_init(fibptr
);
1286 bus_info
= (struct aac_bus_info_response
*) fib_data(fibptr
);
1288 memset(bus_info
, 0, sizeof(*bus_info
));
1290 command
= (struct aac_bus_info
*)bus_info
;
1292 command
->Command
= cpu_to_le32(VM_Ioctl
);
1293 command
->ObjType
= cpu_to_le32(FT_DRIVE
);
1294 command
->MethodId
= cpu_to_le32(1);
1295 command
->CtlCmd
= cpu_to_le32(GetBusInfo
);
1297 rcode
= aac_fib_send(ContainerCommand
,
1304 /* reasoned default */
1305 dev
->maximum_num_physicals
= 16;
1306 if (rcode
>= 0 && le32_to_cpu(bus_info
->Status
) == ST_OK
) {
1307 dev
->maximum_num_physicals
= le32_to_cpu(bus_info
->TargetsPerBus
);
1308 dev
->maximum_num_channels
= le32_to_cpu(bus_info
->BusCount
);
1311 if (!dev
->in_reset
) {
1313 tmp
= le32_to_cpu(dev
->adapter_info
.kernelrev
);
1314 printk(KERN_INFO
"%s%d: kernel %d.%d-%d[%d] %.*s\n",
1320 le32_to_cpu(dev
->adapter_info
.kernelbuild
),
1321 (int)sizeof(dev
->supplement_adapter_info
.BuildDate
),
1322 dev
->supplement_adapter_info
.BuildDate
);
1323 tmp
= le32_to_cpu(dev
->adapter_info
.monitorrev
);
1324 printk(KERN_INFO
"%s%d: monitor %d.%d-%d[%d]\n",
1326 tmp
>>24,(tmp
>>16)&0xff,tmp
&0xff,
1327 le32_to_cpu(dev
->adapter_info
.monitorbuild
));
1328 tmp
= le32_to_cpu(dev
->adapter_info
.biosrev
);
1329 printk(KERN_INFO
"%s%d: bios %d.%d-%d[%d]\n",
1331 tmp
>>24,(tmp
>>16)&0xff,tmp
&0xff,
1332 le32_to_cpu(dev
->adapter_info
.biosbuild
));
1334 if (aac_show_serial_number(
1335 shost_to_class(dev
->scsi_host_ptr
), buffer
))
1336 printk(KERN_INFO
"%s%d: serial %s",
1337 dev
->name
, dev
->id
, buffer
);
1338 if (dev
->supplement_adapter_info
.VpdInfo
.Tsid
[0]) {
1339 printk(KERN_INFO
"%s%d: TSID %.*s\n",
1341 (int)sizeof(dev
->supplement_adapter_info
.VpdInfo
.Tsid
),
1342 dev
->supplement_adapter_info
.VpdInfo
.Tsid
);
1344 if (!aac_check_reset
|| ((aac_check_reset
== 1) &&
1345 (dev
->supplement_adapter_info
.SupportedOptions2
&
1346 AAC_OPTION_IGNORE_RESET
))) {
1347 printk(KERN_INFO
"%s%d: Reset Adapter Ignored\n",
1348 dev
->name
, dev
->id
);
1352 dev
->cache_protected
= 0;
1353 dev
->jbod
= ((dev
->supplement_adapter_info
.FeatureBits
&
1354 AAC_FEATURE_JBOD
) != 0);
1355 dev
->nondasd_support
= 0;
1356 dev
->raid_scsi_mode
= 0;
1357 if(dev
->adapter_info
.options
& AAC_OPT_NONDASD
)
1358 dev
->nondasd_support
= 1;
1361 * If the firmware supports ROMB RAID/SCSI mode and we are currently
1362 * in RAID/SCSI mode, set the flag. For now if in this mode we will
1363 * force nondasd support on. If we decide to allow the non-dasd flag
1364 * additional changes changes will have to be made to support
1365 * RAID/SCSI. the function aac_scsi_cmd in this module will have to be
1366 * changed to support the new dev->raid_scsi_mode flag instead of
1367 * leaching off of the dev->nondasd_support flag. Also in linit.c the
1368 * function aac_detect will have to be modified where it sets up the
1369 * max number of channels based on the aac->nondasd_support flag only.
1371 if ((dev
->adapter_info
.options
& AAC_OPT_SCSI_MANAGED
) &&
1372 (dev
->adapter_info
.options
& AAC_OPT_RAID_SCSI_MODE
)) {
1373 dev
->nondasd_support
= 1;
1374 dev
->raid_scsi_mode
= 1;
1376 if (dev
->raid_scsi_mode
!= 0)
1377 printk(KERN_INFO
"%s%d: ROMB RAID/SCSI mode enabled\n",
1378 dev
->name
, dev
->id
);
1381 dev
->nondasd_support
= (nondasd
!=0);
1382 if (dev
->nondasd_support
&& !dev
->in_reset
)
1383 printk(KERN_INFO
"%s%d: Non-DASD support enabled.\n",dev
->name
, dev
->id
);
1385 dev
->dac_support
= 0;
1386 if( (sizeof(dma_addr_t
) > 4) && (dev
->adapter_info
.options
& AAC_OPT_SGMAP_HOST64
)){
1388 printk(KERN_INFO
"%s%d: 64bit support enabled.\n",
1389 dev
->name
, dev
->id
);
1390 dev
->dac_support
= 1;
1394 dev
->dac_support
= (dacmode
!=0);
1396 if(dev
->dac_support
!= 0) {
1397 if (!pci_set_dma_mask(dev
->pdev
, DMA_64BIT_MASK
) &&
1398 !pci_set_consistent_dma_mask(dev
->pdev
, DMA_64BIT_MASK
)) {
1400 printk(KERN_INFO
"%s%d: 64 Bit DAC enabled\n",
1401 dev
->name
, dev
->id
);
1402 } else if (!pci_set_dma_mask(dev
->pdev
, DMA_32BIT_MASK
) &&
1403 !pci_set_consistent_dma_mask(dev
->pdev
, DMA_32BIT_MASK
)) {
1404 printk(KERN_INFO
"%s%d: DMA mask set failed, 64 Bit DAC disabled\n",
1405 dev
->name
, dev
->id
);
1406 dev
->dac_support
= 0;
1408 printk(KERN_WARNING
"%s%d: No suitable DMA available.\n",
1409 dev
->name
, dev
->id
);
1414 * Deal with configuring for the individualized limits of each packet
1417 dev
->a_ops
.adapter_scsi
= (dev
->dac_support
)
1418 ? ((aac_get_driver_ident(dev
->cardtype
)->quirks
& AAC_QUIRK_SCSI_32
)
1422 if (dev
->raw_io_interface
) {
1423 dev
->a_ops
.adapter_bounds
= (dev
->raw_io_64
)
1426 dev
->a_ops
.adapter_read
= aac_read_raw_io
;
1427 dev
->a_ops
.adapter_write
= aac_write_raw_io
;
1429 dev
->a_ops
.adapter_bounds
= aac_bounds_32
;
1430 dev
->scsi_host_ptr
->sg_tablesize
= (dev
->max_fib_size
-
1431 sizeof(struct aac_fibhdr
) -
1432 sizeof(struct aac_write
) + sizeof(struct sgentry
)) /
1433 sizeof(struct sgentry
);
1434 if (dev
->dac_support
) {
1435 dev
->a_ops
.adapter_read
= aac_read_block64
;
1436 dev
->a_ops
.adapter_write
= aac_write_block64
;
1438 * 38 scatter gather elements
1440 dev
->scsi_host_ptr
->sg_tablesize
=
1441 (dev
->max_fib_size
-
1442 sizeof(struct aac_fibhdr
) -
1443 sizeof(struct aac_write64
) +
1444 sizeof(struct sgentry64
)) /
1445 sizeof(struct sgentry64
);
1447 dev
->a_ops
.adapter_read
= aac_read_block
;
1448 dev
->a_ops
.adapter_write
= aac_write_block
;
1450 dev
->scsi_host_ptr
->max_sectors
= AAC_MAX_32BIT_SGBCOUNT
;
1451 if(!(dev
->adapter_info
.options
& AAC_OPT_NEW_COMM
)) {
1453 * Worst case size that could cause sg overflow when
1454 * we break up SG elements that are larger than 64KB.
1455 * Would be nice if we could tell the SCSI layer what
1456 * the maximum SG element size can be. Worst case is
1457 * (sg_tablesize-1) 4KB elements with one 64KB
1459 * 32bit -> 468 or 238KB 64bit -> 424 or 212KB
1461 dev
->scsi_host_ptr
->max_sectors
=
1462 (dev
->scsi_host_ptr
->sg_tablesize
* 8) + 112;
1466 aac_fib_complete(fibptr
);
1467 aac_fib_free(fibptr
);
1473 static void io_callback(void *context
, struct fib
* fibptr
)
1475 struct aac_dev
*dev
;
1476 struct aac_read_reply
*readreply
;
1477 struct scsi_cmnd
*scsicmd
;
1480 scsicmd
= (struct scsi_cmnd
*) context
;
1482 if (!aac_valid_context(scsicmd
, fibptr
))
1486 cid
= scmd_id(scsicmd
);
1488 if (nblank(dprintk(x
))) {
1490 switch (scsicmd
->cmnd
[0]) {
1493 lba
= ((scsicmd
->cmnd
[1] & 0x1F) << 16) |
1494 (scsicmd
->cmnd
[2] << 8) | scsicmd
->cmnd
[3];
1498 lba
= ((u64
)scsicmd
->cmnd
[2] << 56) |
1499 ((u64
)scsicmd
->cmnd
[3] << 48) |
1500 ((u64
)scsicmd
->cmnd
[4] << 40) |
1501 ((u64
)scsicmd
->cmnd
[5] << 32) |
1502 ((u64
)scsicmd
->cmnd
[6] << 24) |
1503 (scsicmd
->cmnd
[7] << 16) |
1504 (scsicmd
->cmnd
[8] << 8) | scsicmd
->cmnd
[9];
1508 lba
= ((u64
)scsicmd
->cmnd
[2] << 24) |
1509 (scsicmd
->cmnd
[3] << 16) |
1510 (scsicmd
->cmnd
[4] << 8) | scsicmd
->cmnd
[5];
1513 lba
= ((u64
)scsicmd
->cmnd
[2] << 24) |
1514 (scsicmd
->cmnd
[3] << 16) |
1515 (scsicmd
->cmnd
[4] << 8) | scsicmd
->cmnd
[5];
1519 "io_callback[cpu %d]: lba = %llu, t = %ld.\n",
1520 smp_processor_id(), (unsigned long long)lba
, jiffies
);
1523 BUG_ON(fibptr
== NULL
);
1525 scsi_dma_unmap(scsicmd
);
1527 readreply
= (struct aac_read_reply
*)fib_data(fibptr
);
1528 if (le32_to_cpu(readreply
->status
) == ST_OK
)
1529 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_GOOD
;
1531 #ifdef AAC_DETAILED_STATUS_INFO
1532 printk(KERN_WARNING
"io_callback: io failed, status = %d\n",
1533 le32_to_cpu(readreply
->status
));
1535 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_CHECK_CONDITION
;
1536 set_sense(&dev
->fsa_dev
[cid
].sense_data
,
1537 HARDWARE_ERROR
, SENCODE_INTERNAL_TARGET_FAILURE
,
1538 ASENCODE_INTERNAL_TARGET_FAILURE
, 0, 0);
1539 memcpy(scsicmd
->sense_buffer
, &dev
->fsa_dev
[cid
].sense_data
,
1540 min_t(size_t, sizeof(dev
->fsa_dev
[cid
].sense_data
),
1541 SCSI_SENSE_BUFFERSIZE
));
1543 aac_fib_complete(fibptr
);
1544 aac_fib_free(fibptr
);
1546 scsicmd
->scsi_done(scsicmd
);
1549 static int aac_read(struct scsi_cmnd
* scsicmd
)
1554 struct aac_dev
*dev
;
1555 struct fib
* cmd_fibcontext
;
1557 dev
= (struct aac_dev
*)scsicmd
->device
->host
->hostdata
;
1559 * Get block address and transfer length
1561 switch (scsicmd
->cmnd
[0]) {
1563 dprintk((KERN_DEBUG
"aachba: received a read(6) command on id %d.\n", scmd_id(scsicmd
)));
1565 lba
= ((scsicmd
->cmnd
[1] & 0x1F) << 16) |
1566 (scsicmd
->cmnd
[2] << 8) | scsicmd
->cmnd
[3];
1567 count
= scsicmd
->cmnd
[4];
1573 dprintk((KERN_DEBUG
"aachba: received a read(16) command on id %d.\n", scmd_id(scsicmd
)));
1575 lba
= ((u64
)scsicmd
->cmnd
[2] << 56) |
1576 ((u64
)scsicmd
->cmnd
[3] << 48) |
1577 ((u64
)scsicmd
->cmnd
[4] << 40) |
1578 ((u64
)scsicmd
->cmnd
[5] << 32) |
1579 ((u64
)scsicmd
->cmnd
[6] << 24) |
1580 (scsicmd
->cmnd
[7] << 16) |
1581 (scsicmd
->cmnd
[8] << 8) | scsicmd
->cmnd
[9];
1582 count
= (scsicmd
->cmnd
[10] << 24) |
1583 (scsicmd
->cmnd
[11] << 16) |
1584 (scsicmd
->cmnd
[12] << 8) | scsicmd
->cmnd
[13];
1587 dprintk((KERN_DEBUG
"aachba: received a read(12) command on id %d.\n", scmd_id(scsicmd
)));
1589 lba
= ((u64
)scsicmd
->cmnd
[2] << 24) |
1590 (scsicmd
->cmnd
[3] << 16) |
1591 (scsicmd
->cmnd
[4] << 8) | scsicmd
->cmnd
[5];
1592 count
= (scsicmd
->cmnd
[6] << 24) |
1593 (scsicmd
->cmnd
[7] << 16) |
1594 (scsicmd
->cmnd
[8] << 8) | scsicmd
->cmnd
[9];
1597 dprintk((KERN_DEBUG
"aachba: received a read(10) command on id %d.\n", scmd_id(scsicmd
)));
1599 lba
= ((u64
)scsicmd
->cmnd
[2] << 24) |
1600 (scsicmd
->cmnd
[3] << 16) |
1601 (scsicmd
->cmnd
[4] << 8) | scsicmd
->cmnd
[5];
1602 count
= (scsicmd
->cmnd
[7] << 8) | scsicmd
->cmnd
[8];
1605 dprintk((KERN_DEBUG
"aac_read[cpu %d]: lba = %llu, t = %ld.\n",
1606 smp_processor_id(), (unsigned long long)lba
, jiffies
));
1607 if (aac_adapter_bounds(dev
,scsicmd
,lba
))
1610 * Alocate and initialize a Fib
1612 if (!(cmd_fibcontext
= aac_fib_alloc(dev
))) {
1616 status
= aac_adapter_read(cmd_fibcontext
, scsicmd
, lba
, count
);
1619 * Check that the command queued to the controller
1621 if (status
== -EINPROGRESS
) {
1622 scsicmd
->SCp
.phase
= AAC_OWNER_FIRMWARE
;
1626 printk(KERN_WARNING
"aac_read: aac_fib_send failed with status: %d.\n", status
);
1628 * For some reason, the Fib didn't queue, return QUEUE_FULL
1630 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_TASK_SET_FULL
;
1631 scsicmd
->scsi_done(scsicmd
);
1632 aac_fib_complete(cmd_fibcontext
);
1633 aac_fib_free(cmd_fibcontext
);
1637 static int aac_write(struct scsi_cmnd
* scsicmd
)
1643 struct aac_dev
*dev
;
1644 struct fib
* cmd_fibcontext
;
1646 dev
= (struct aac_dev
*)scsicmd
->device
->host
->hostdata
;
1648 * Get block address and transfer length
1650 if (scsicmd
->cmnd
[0] == WRITE_6
) /* 6 byte command */
1652 lba
= ((scsicmd
->cmnd
[1] & 0x1F) << 16) | (scsicmd
->cmnd
[2] << 8) | scsicmd
->cmnd
[3];
1653 count
= scsicmd
->cmnd
[4];
1657 } else if (scsicmd
->cmnd
[0] == WRITE_16
) { /* 16 byte command */
1658 dprintk((KERN_DEBUG
"aachba: received a write(16) command on id %d.\n", scmd_id(scsicmd
)));
1660 lba
= ((u64
)scsicmd
->cmnd
[2] << 56) |
1661 ((u64
)scsicmd
->cmnd
[3] << 48) |
1662 ((u64
)scsicmd
->cmnd
[4] << 40) |
1663 ((u64
)scsicmd
->cmnd
[5] << 32) |
1664 ((u64
)scsicmd
->cmnd
[6] << 24) |
1665 (scsicmd
->cmnd
[7] << 16) |
1666 (scsicmd
->cmnd
[8] << 8) | scsicmd
->cmnd
[9];
1667 count
= (scsicmd
->cmnd
[10] << 24) | (scsicmd
->cmnd
[11] << 16) |
1668 (scsicmd
->cmnd
[12] << 8) | scsicmd
->cmnd
[13];
1669 fua
= scsicmd
->cmnd
[1] & 0x8;
1670 } else if (scsicmd
->cmnd
[0] == WRITE_12
) { /* 12 byte command */
1671 dprintk((KERN_DEBUG
"aachba: received a write(12) command on id %d.\n", scmd_id(scsicmd
)));
1673 lba
= ((u64
)scsicmd
->cmnd
[2] << 24) | (scsicmd
->cmnd
[3] << 16)
1674 | (scsicmd
->cmnd
[4] << 8) | scsicmd
->cmnd
[5];
1675 count
= (scsicmd
->cmnd
[6] << 24) | (scsicmd
->cmnd
[7] << 16)
1676 | (scsicmd
->cmnd
[8] << 8) | scsicmd
->cmnd
[9];
1677 fua
= scsicmd
->cmnd
[1] & 0x8;
1679 dprintk((KERN_DEBUG
"aachba: received a write(10) command on id %d.\n", scmd_id(scsicmd
)));
1680 lba
= ((u64
)scsicmd
->cmnd
[2] << 24) | (scsicmd
->cmnd
[3] << 16) | (scsicmd
->cmnd
[4] << 8) | scsicmd
->cmnd
[5];
1681 count
= (scsicmd
->cmnd
[7] << 8) | scsicmd
->cmnd
[8];
1682 fua
= scsicmd
->cmnd
[1] & 0x8;
1684 dprintk((KERN_DEBUG
"aac_write[cpu %d]: lba = %llu, t = %ld.\n",
1685 smp_processor_id(), (unsigned long long)lba
, jiffies
));
1686 if (aac_adapter_bounds(dev
,scsicmd
,lba
))
1689 * Allocate and initialize a Fib then setup a BlockWrite command
1691 if (!(cmd_fibcontext
= aac_fib_alloc(dev
))) {
1692 scsicmd
->result
= DID_ERROR
<< 16;
1693 scsicmd
->scsi_done(scsicmd
);
1697 status
= aac_adapter_write(cmd_fibcontext
, scsicmd
, lba
, count
, fua
);
1700 * Check that the command queued to the controller
1702 if (status
== -EINPROGRESS
) {
1703 scsicmd
->SCp
.phase
= AAC_OWNER_FIRMWARE
;
1707 printk(KERN_WARNING
"aac_write: aac_fib_send failed with status: %d\n", status
);
1709 * For some reason, the Fib didn't queue, return QUEUE_FULL
1711 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_TASK_SET_FULL
;
1712 scsicmd
->scsi_done(scsicmd
);
1714 aac_fib_complete(cmd_fibcontext
);
1715 aac_fib_free(cmd_fibcontext
);
1719 static void synchronize_callback(void *context
, struct fib
*fibptr
)
1721 struct aac_synchronize_reply
*synchronizereply
;
1722 struct scsi_cmnd
*cmd
;
1726 if (!aac_valid_context(cmd
, fibptr
))
1729 dprintk((KERN_DEBUG
"synchronize_callback[cpu %d]: t = %ld.\n",
1730 smp_processor_id(), jiffies
));
1731 BUG_ON(fibptr
== NULL
);
1734 synchronizereply
= fib_data(fibptr
);
1735 if (le32_to_cpu(synchronizereply
->status
) == CT_OK
)
1736 cmd
->result
= DID_OK
<< 16 |
1737 COMMAND_COMPLETE
<< 8 | SAM_STAT_GOOD
;
1739 struct scsi_device
*sdev
= cmd
->device
;
1740 struct aac_dev
*dev
= fibptr
->dev
;
1741 u32 cid
= sdev_id(sdev
);
1743 "synchronize_callback: synchronize failed, status = %d\n",
1744 le32_to_cpu(synchronizereply
->status
));
1745 cmd
->result
= DID_OK
<< 16 |
1746 COMMAND_COMPLETE
<< 8 | SAM_STAT_CHECK_CONDITION
;
1747 set_sense(&dev
->fsa_dev
[cid
].sense_data
,
1748 HARDWARE_ERROR
, SENCODE_INTERNAL_TARGET_FAILURE
,
1749 ASENCODE_INTERNAL_TARGET_FAILURE
, 0, 0);
1750 memcpy(cmd
->sense_buffer
, &dev
->fsa_dev
[cid
].sense_data
,
1751 min_t(size_t, sizeof(dev
->fsa_dev
[cid
].sense_data
),
1752 SCSI_SENSE_BUFFERSIZE
));
1755 aac_fib_complete(fibptr
);
1756 aac_fib_free(fibptr
);
1757 cmd
->scsi_done(cmd
);
1760 static int aac_synchronize(struct scsi_cmnd
*scsicmd
)
1763 struct fib
*cmd_fibcontext
;
1764 struct aac_synchronize
*synchronizecmd
;
1765 struct scsi_cmnd
*cmd
;
1766 struct scsi_device
*sdev
= scsicmd
->device
;
1768 struct aac_dev
*aac
;
1769 u64 lba
= ((u64
)scsicmd
->cmnd
[2] << 24) | (scsicmd
->cmnd
[3] << 16) |
1770 (scsicmd
->cmnd
[4] << 8) | scsicmd
->cmnd
[5];
1771 u32 count
= (scsicmd
->cmnd
[7] << 8) | scsicmd
->cmnd
[8];
1772 unsigned long flags
;
1775 * Wait for all outstanding queued commands to complete to this
1776 * specific target (block).
1778 spin_lock_irqsave(&sdev
->list_lock
, flags
);
1779 list_for_each_entry(cmd
, &sdev
->cmd_list
, list
)
1780 if (cmd
->SCp
.phase
== AAC_OWNER_FIRMWARE
) {
1784 if (cmd
->cmnd
[0] == WRITE_6
) {
1785 cmnd_lba
= ((cmd
->cmnd
[1] & 0x1F) << 16) |
1786 (cmd
->cmnd
[2] << 8) |
1788 cmnd_count
= cmd
->cmnd
[4];
1789 if (cmnd_count
== 0)
1791 } else if (cmd
->cmnd
[0] == WRITE_16
) {
1792 cmnd_lba
= ((u64
)cmd
->cmnd
[2] << 56) |
1793 ((u64
)cmd
->cmnd
[3] << 48) |
1794 ((u64
)cmd
->cmnd
[4] << 40) |
1795 ((u64
)cmd
->cmnd
[5] << 32) |
1796 ((u64
)cmd
->cmnd
[6] << 24) |
1797 (cmd
->cmnd
[7] << 16) |
1798 (cmd
->cmnd
[8] << 8) |
1800 cmnd_count
= (cmd
->cmnd
[10] << 24) |
1801 (cmd
->cmnd
[11] << 16) |
1802 (cmd
->cmnd
[12] << 8) |
1804 } else if (cmd
->cmnd
[0] == WRITE_12
) {
1805 cmnd_lba
= ((u64
)cmd
->cmnd
[2] << 24) |
1806 (cmd
->cmnd
[3] << 16) |
1807 (cmd
->cmnd
[4] << 8) |
1809 cmnd_count
= (cmd
->cmnd
[6] << 24) |
1810 (cmd
->cmnd
[7] << 16) |
1811 (cmd
->cmnd
[8] << 8) |
1813 } else if (cmd
->cmnd
[0] == WRITE_10
) {
1814 cmnd_lba
= ((u64
)cmd
->cmnd
[2] << 24) |
1815 (cmd
->cmnd
[3] << 16) |
1816 (cmd
->cmnd
[4] << 8) |
1818 cmnd_count
= (cmd
->cmnd
[7] << 8) |
1822 if (((cmnd_lba
+ cmnd_count
) < lba
) ||
1823 (count
&& ((lba
+ count
) < cmnd_lba
)))
1829 spin_unlock_irqrestore(&sdev
->list_lock
, flags
);
1832 * Yield the processor (requeue for later)
1835 return SCSI_MLQUEUE_DEVICE_BUSY
;
1837 aac
= (struct aac_dev
*)sdev
->host
->hostdata
;
1839 return SCSI_MLQUEUE_HOST_BUSY
;
1842 * Allocate and initialize a Fib
1844 if (!(cmd_fibcontext
= aac_fib_alloc(aac
)))
1845 return SCSI_MLQUEUE_HOST_BUSY
;
1847 aac_fib_init(cmd_fibcontext
);
1849 synchronizecmd
= fib_data(cmd_fibcontext
);
1850 synchronizecmd
->command
= cpu_to_le32(VM_ContainerConfig
);
1851 synchronizecmd
->type
= cpu_to_le32(CT_FLUSH_CACHE
);
1852 synchronizecmd
->cid
= cpu_to_le32(scmd_id(scsicmd
));
1853 synchronizecmd
->count
=
1854 cpu_to_le32(sizeof(((struct aac_synchronize_reply
*)NULL
)->data
));
1857 * Now send the Fib to the adapter
1859 status
= aac_fib_send(ContainerCommand
,
1861 sizeof(struct aac_synchronize
),
1864 (fib_callback
)synchronize_callback
,
1868 * Check that the command queued to the controller
1870 if (status
== -EINPROGRESS
) {
1871 scsicmd
->SCp
.phase
= AAC_OWNER_FIRMWARE
;
1876 "aac_synchronize: aac_fib_send failed with status: %d.\n", status
);
1877 aac_fib_complete(cmd_fibcontext
);
1878 aac_fib_free(cmd_fibcontext
);
1879 return SCSI_MLQUEUE_HOST_BUSY
;
1883 * aac_scsi_cmd() - Process SCSI command
1884 * @scsicmd: SCSI command block
1886 * Emulate a SCSI command and queue the required request for the
1890 int aac_scsi_cmd(struct scsi_cmnd
* scsicmd
)
1893 struct Scsi_Host
*host
= scsicmd
->device
->host
;
1894 struct aac_dev
*dev
= (struct aac_dev
*)host
->hostdata
;
1895 struct fsa_dev_info
*fsa_dev_ptr
= dev
->fsa_dev
;
1897 if (fsa_dev_ptr
== NULL
)
1900 * If the bus, id or lun is out of range, return fail
1901 * Test does not apply to ID 16, the pseudo id for the controller
1904 cid
= scmd_id(scsicmd
);
1905 if (cid
!= host
->this_id
) {
1906 if (scmd_channel(scsicmd
) == CONTAINER_CHANNEL
) {
1907 if((cid
>= dev
->maximum_num_containers
) ||
1908 (scsicmd
->device
->lun
!= 0)) {
1909 scsicmd
->result
= DID_NO_CONNECT
<< 16;
1910 scsicmd
->scsi_done(scsicmd
);
1915 * If the target container doesn't exist, it may have
1916 * been newly created
1918 if ((fsa_dev_ptr
[cid
].valid
& 1) == 0) {
1919 switch (scsicmd
->cmnd
[0]) {
1920 case SERVICE_ACTION_IN
:
1921 if (!(dev
->raw_io_interface
) ||
1922 !(dev
->raw_io_64
) ||
1923 ((scsicmd
->cmnd
[1] & 0x1f) != SAI_READ_CAPACITY_16
))
1927 case TEST_UNIT_READY
:
1930 return _aac_probe_container(scsicmd
,
1931 aac_probe_container_callback2
);
1936 } else { /* check for physical non-dasd devices */
1937 if (dev
->nondasd_support
|| expose_physicals
||
1941 return aac_send_srb_fib(scsicmd
);
1943 scsicmd
->result
= DID_NO_CONNECT
<< 16;
1944 scsicmd
->scsi_done(scsicmd
);
1950 * else Command for the controller itself
1952 else if ((scsicmd
->cmnd
[0] != INQUIRY
) && /* only INQUIRY & TUR cmnd supported for controller */
1953 (scsicmd
->cmnd
[0] != TEST_UNIT_READY
))
1955 dprintk((KERN_WARNING
"Only INQUIRY & TUR command supported for controller, rcvd = 0x%x.\n", scsicmd
->cmnd
[0]));
1956 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_CHECK_CONDITION
;
1957 set_sense(&dev
->fsa_dev
[cid
].sense_data
,
1958 ILLEGAL_REQUEST
, SENCODE_INVALID_COMMAND
,
1959 ASENCODE_INVALID_COMMAND
, 0, 0);
1960 memcpy(scsicmd
->sense_buffer
, &dev
->fsa_dev
[cid
].sense_data
,
1961 min_t(size_t, sizeof(dev
->fsa_dev
[cid
].sense_data
),
1962 SCSI_SENSE_BUFFERSIZE
));
1963 scsicmd
->scsi_done(scsicmd
);
1968 /* Handle commands here that don't really require going out to the adapter */
1969 switch (scsicmd
->cmnd
[0]) {
1972 struct inquiry_data inq_data
;
1974 dprintk((KERN_DEBUG
"INQUIRY command, ID: %d.\n", cid
));
1975 memset(&inq_data
, 0, sizeof (struct inquiry_data
));
1977 if (scsicmd
->cmnd
[1] & 0x1) {
1978 char *arr
= (char *)&inq_data
;
1981 arr
[0] = (scmd_id(scsicmd
) == host
->this_id
) ?
1982 INQD_PDT_PROC
: INQD_PDT_DA
;
1983 if (scsicmd
->cmnd
[2] == 0) {
1984 /* supported vital product data pages */
1988 arr
[1] = scsicmd
->cmnd
[2];
1989 aac_internal_transfer(scsicmd
, &inq_data
, 0,
1991 scsicmd
->result
= DID_OK
<< 16 |
1992 COMMAND_COMPLETE
<< 8 | SAM_STAT_GOOD
;
1993 } else if (scsicmd
->cmnd
[2] == 0x80) {
1994 /* unit serial number page */
1995 arr
[3] = setinqserial(dev
, &arr
[4],
1997 arr
[1] = scsicmd
->cmnd
[2];
1998 aac_internal_transfer(scsicmd
, &inq_data
, 0,
2000 return aac_get_container_serial(scsicmd
);
2002 /* vpd page not implemented */
2003 scsicmd
->result
= DID_OK
<< 16 |
2004 COMMAND_COMPLETE
<< 8 |
2005 SAM_STAT_CHECK_CONDITION
;
2006 set_sense(&dev
->fsa_dev
[cid
].sense_data
,
2007 ILLEGAL_REQUEST
, SENCODE_INVALID_CDB_FIELD
,
2008 ASENCODE_NO_SENSE
, 7, 2);
2009 memcpy(scsicmd
->sense_buffer
,
2010 &dev
->fsa_dev
[cid
].sense_data
,
2012 sizeof(dev
->fsa_dev
[cid
].sense_data
),
2013 SCSI_SENSE_BUFFERSIZE
));
2015 scsicmd
->scsi_done(scsicmd
);
2018 inq_data
.inqd_ver
= 2; /* claim compliance to SCSI-2 */
2019 inq_data
.inqd_rdf
= 2; /* A response data format value of two indicates that the data shall be in the format specified in SCSI-2 */
2020 inq_data
.inqd_len
= 31;
2021 /*Format for "pad2" is RelAdr | WBus32 | WBus16 | Sync | Linked |Reserved| CmdQue | SftRe */
2022 inq_data
.inqd_pad2
= 0x32 ; /*WBus16|Sync|CmdQue */
2024 * Set the Vendor, Product, and Revision Level
2025 * see: <vendor>.c i.e. aac.c
2027 if (cid
== host
->this_id
) {
2028 setinqstr(dev
, (void *) (inq_data
.inqd_vid
), ARRAY_SIZE(container_types
));
2029 inq_data
.inqd_pdt
= INQD_PDT_PROC
; /* Processor device */
2030 aac_internal_transfer(scsicmd
, &inq_data
, 0, sizeof(inq_data
));
2031 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_GOOD
;
2032 scsicmd
->scsi_done(scsicmd
);
2037 setinqstr(dev
, (void *) (inq_data
.inqd_vid
), fsa_dev_ptr
[cid
].type
);
2038 inq_data
.inqd_pdt
= INQD_PDT_DA
; /* Direct/random access device */
2039 aac_internal_transfer(scsicmd
, &inq_data
, 0, sizeof(inq_data
));
2040 return aac_get_container_name(scsicmd
);
2042 case SERVICE_ACTION_IN
:
2043 if (!(dev
->raw_io_interface
) ||
2044 !(dev
->raw_io_64
) ||
2045 ((scsicmd
->cmnd
[1] & 0x1f) != SAI_READ_CAPACITY_16
))
2051 dprintk((KERN_DEBUG
"READ CAPACITY_16 command.\n"));
2052 capacity
= fsa_dev_ptr
[cid
].size
- 1;
2053 cp
[0] = (capacity
>> 56) & 0xff;
2054 cp
[1] = (capacity
>> 48) & 0xff;
2055 cp
[2] = (capacity
>> 40) & 0xff;
2056 cp
[3] = (capacity
>> 32) & 0xff;
2057 cp
[4] = (capacity
>> 24) & 0xff;
2058 cp
[5] = (capacity
>> 16) & 0xff;
2059 cp
[6] = (capacity
>> 8) & 0xff;
2060 cp
[7] = (capacity
>> 0) & 0xff;
2066 aac_internal_transfer(scsicmd
, cp
, 0,
2067 min_t(size_t, scsicmd
->cmnd
[13], sizeof(cp
)));
2068 if (sizeof(cp
) < scsicmd
->cmnd
[13]) {
2069 unsigned int len
, offset
= sizeof(cp
);
2071 memset(cp
, 0, offset
);
2073 len
= min_t(size_t, scsicmd
->cmnd
[13] - offset
,
2075 aac_internal_transfer(scsicmd
, cp
, offset
, len
);
2076 } while ((offset
+= len
) < scsicmd
->cmnd
[13]);
2079 /* Do not cache partition table for arrays */
2080 scsicmd
->device
->removable
= 1;
2082 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_GOOD
;
2083 scsicmd
->scsi_done(scsicmd
);
2093 dprintk((KERN_DEBUG
"READ CAPACITY command.\n"));
2094 if (fsa_dev_ptr
[cid
].size
<= 0x100000000ULL
)
2095 capacity
= fsa_dev_ptr
[cid
].size
- 1;
2099 cp
[0] = (capacity
>> 24) & 0xff;
2100 cp
[1] = (capacity
>> 16) & 0xff;
2101 cp
[2] = (capacity
>> 8) & 0xff;
2102 cp
[3] = (capacity
>> 0) & 0xff;
2107 aac_internal_transfer(scsicmd
, cp
, 0, sizeof(cp
));
2108 /* Do not cache partition table for arrays */
2109 scsicmd
->device
->removable
= 1;
2111 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_GOOD
;
2112 scsicmd
->scsi_done(scsicmd
);
2120 int mode_buf_length
= 4;
2122 dprintk((KERN_DEBUG
"MODE SENSE command.\n"));
2123 mode_buf
[0] = 3; /* Mode data length */
2124 mode_buf
[1] = 0; /* Medium type - default */
2125 mode_buf
[2] = 0; /* Device-specific param,
2126 bit 8: 0/1 = write enabled/protected
2127 bit 4: 0/1 = FUA enabled */
2128 if (dev
->raw_io_interface
&& ((aac_cache
& 5) != 1))
2130 mode_buf
[3] = 0; /* Block descriptor length */
2131 if (((scsicmd
->cmnd
[2] & 0x3f) == 8) ||
2132 ((scsicmd
->cmnd
[2] & 0x3f) == 0x3f)) {
2136 mode_buf
[6] = ((aac_cache
& 6) == 2)
2137 ? 0 : 0x04; /* WCE */
2138 mode_buf_length
= 7;
2139 if (mode_buf_length
> scsicmd
->cmnd
[4])
2140 mode_buf_length
= scsicmd
->cmnd
[4];
2142 aac_internal_transfer(scsicmd
, mode_buf
, 0, mode_buf_length
);
2143 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_GOOD
;
2144 scsicmd
->scsi_done(scsicmd
);
2151 int mode_buf_length
= 8;
2153 dprintk((KERN_DEBUG
"MODE SENSE 10 byte command.\n"));
2154 mode_buf
[0] = 0; /* Mode data length (MSB) */
2155 mode_buf
[1] = 6; /* Mode data length (LSB) */
2156 mode_buf
[2] = 0; /* Medium type - default */
2157 mode_buf
[3] = 0; /* Device-specific param,
2158 bit 8: 0/1 = write enabled/protected
2159 bit 4: 0/1 = FUA enabled */
2160 if (dev
->raw_io_interface
&& ((aac_cache
& 5) != 1))
2162 mode_buf
[4] = 0; /* reserved */
2163 mode_buf
[5] = 0; /* reserved */
2164 mode_buf
[6] = 0; /* Block descriptor length (MSB) */
2165 mode_buf
[7] = 0; /* Block descriptor length (LSB) */
2166 if (((scsicmd
->cmnd
[2] & 0x3f) == 8) ||
2167 ((scsicmd
->cmnd
[2] & 0x3f) == 0x3f)) {
2171 mode_buf
[10] = ((aac_cache
& 6) == 2)
2172 ? 0 : 0x04; /* WCE */
2173 mode_buf_length
= 11;
2174 if (mode_buf_length
> scsicmd
->cmnd
[8])
2175 mode_buf_length
= scsicmd
->cmnd
[8];
2177 aac_internal_transfer(scsicmd
, mode_buf
, 0, mode_buf_length
);
2179 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_GOOD
;
2180 scsicmd
->scsi_done(scsicmd
);
2185 dprintk((KERN_DEBUG
"REQUEST SENSE command.\n"));
2186 memcpy(scsicmd
->sense_buffer
, &dev
->fsa_dev
[cid
].sense_data
, sizeof (struct sense_data
));
2187 memset(&dev
->fsa_dev
[cid
].sense_data
, 0, sizeof (struct sense_data
));
2188 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_GOOD
;
2189 scsicmd
->scsi_done(scsicmd
);
2192 case ALLOW_MEDIUM_REMOVAL
:
2193 dprintk((KERN_DEBUG
"LOCK command.\n"));
2194 if (scsicmd
->cmnd
[4])
2195 fsa_dev_ptr
[cid
].locked
= 1;
2197 fsa_dev_ptr
[cid
].locked
= 0;
2199 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_GOOD
;
2200 scsicmd
->scsi_done(scsicmd
);
2203 * These commands are all No-Ops
2205 case TEST_UNIT_READY
:
2209 case REASSIGN_BLOCKS
:
2212 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_GOOD
;
2213 scsicmd
->scsi_done(scsicmd
);
2217 switch (scsicmd
->cmnd
[0])
2226 * Hack to keep track of ordinal number of the device that
2227 * corresponds to a container. Needed to convert
2228 * containers to /dev/sd device names
2231 if (scsicmd
->request
->rq_disk
)
2232 strlcpy(fsa_dev_ptr
[cid
].devname
,
2233 scsicmd
->request
->rq_disk
->disk_name
,
2234 min(sizeof(fsa_dev_ptr
[cid
].devname
),
2235 sizeof(scsicmd
->request
->rq_disk
->disk_name
) + 1));
2237 return aac_read(scsicmd
);
2245 return aac_write(scsicmd
);
2247 case SYNCHRONIZE_CACHE
:
2248 if (((aac_cache
& 6) == 6) && dev
->cache_protected
) {
2249 scsicmd
->result
= DID_OK
<< 16 |
2250 COMMAND_COMPLETE
<< 8 | SAM_STAT_GOOD
;
2251 scsicmd
->scsi_done(scsicmd
);
2254 /* Issue FIB to tell Firmware to flush it's cache */
2255 if ((aac_cache
& 6) != 2)
2256 return aac_synchronize(scsicmd
);
2260 * Unhandled commands
2262 dprintk((KERN_WARNING
"Unhandled SCSI Command: 0x%x.\n", scsicmd
->cmnd
[0]));
2263 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_CHECK_CONDITION
;
2264 set_sense(&dev
->fsa_dev
[cid
].sense_data
,
2265 ILLEGAL_REQUEST
, SENCODE_INVALID_COMMAND
,
2266 ASENCODE_INVALID_COMMAND
, 0, 0);
2267 memcpy(scsicmd
->sense_buffer
, &dev
->fsa_dev
[cid
].sense_data
,
2269 sizeof(dev
->fsa_dev
[cid
].sense_data
),
2270 SCSI_SENSE_BUFFERSIZE
));
2271 scsicmd
->scsi_done(scsicmd
);
2276 static int query_disk(struct aac_dev
*dev
, void __user
*arg
)
2278 struct aac_query_disk qd
;
2279 struct fsa_dev_info
*fsa_dev_ptr
;
2281 fsa_dev_ptr
= dev
->fsa_dev
;
2284 if (copy_from_user(&qd
, arg
, sizeof (struct aac_query_disk
)))
2288 else if ((qd
.bus
== -1) && (qd
.id
== -1) && (qd
.lun
== -1))
2290 if (qd
.cnum
< 0 || qd
.cnum
>= dev
->maximum_num_containers
)
2292 qd
.instance
= dev
->scsi_host_ptr
->host_no
;
2294 qd
.id
= CONTAINER_TO_ID(qd
.cnum
);
2295 qd
.lun
= CONTAINER_TO_LUN(qd
.cnum
);
2297 else return -EINVAL
;
2299 qd
.valid
= fsa_dev_ptr
[qd
.cnum
].valid
!= 0;
2300 qd
.locked
= fsa_dev_ptr
[qd
.cnum
].locked
;
2301 qd
.deleted
= fsa_dev_ptr
[qd
.cnum
].deleted
;
2303 if (fsa_dev_ptr
[qd
.cnum
].devname
[0] == '\0')
2308 strlcpy(qd
.name
, fsa_dev_ptr
[qd
.cnum
].devname
,
2309 min(sizeof(qd
.name
), sizeof(fsa_dev_ptr
[qd
.cnum
].devname
) + 1));
2311 if (copy_to_user(arg
, &qd
, sizeof (struct aac_query_disk
)))
2316 static int force_delete_disk(struct aac_dev
*dev
, void __user
*arg
)
2318 struct aac_delete_disk dd
;
2319 struct fsa_dev_info
*fsa_dev_ptr
;
2321 fsa_dev_ptr
= dev
->fsa_dev
;
2325 if (copy_from_user(&dd
, arg
, sizeof (struct aac_delete_disk
)))
2328 if (dd
.cnum
>= dev
->maximum_num_containers
)
2331 * Mark this container as being deleted.
2333 fsa_dev_ptr
[dd
.cnum
].deleted
= 1;
2335 * Mark the container as no longer valid
2337 fsa_dev_ptr
[dd
.cnum
].valid
= 0;
2341 static int delete_disk(struct aac_dev
*dev
, void __user
*arg
)
2343 struct aac_delete_disk dd
;
2344 struct fsa_dev_info
*fsa_dev_ptr
;
2346 fsa_dev_ptr
= dev
->fsa_dev
;
2350 if (copy_from_user(&dd
, arg
, sizeof (struct aac_delete_disk
)))
2353 if (dd
.cnum
>= dev
->maximum_num_containers
)
2356 * If the container is locked, it can not be deleted by the API.
2358 if (fsa_dev_ptr
[dd
.cnum
].locked
)
2362 * Mark the container as no longer being valid.
2364 fsa_dev_ptr
[dd
.cnum
].valid
= 0;
2365 fsa_dev_ptr
[dd
.cnum
].devname
[0] = '\0';
2370 int aac_dev_ioctl(struct aac_dev
*dev
, int cmd
, void __user
*arg
)
2373 case FSACTL_QUERY_DISK
:
2374 return query_disk(dev
, arg
);
2375 case FSACTL_DELETE_DISK
:
2376 return delete_disk(dev
, arg
);
2377 case FSACTL_FORCE_DELETE_DISK
:
2378 return force_delete_disk(dev
, arg
);
2379 case FSACTL_GET_CONTAINERS
:
2380 return aac_get_containers(dev
);
2389 * @context: the context set in the fib - here it is scsi cmd
2390 * @fibptr: pointer to the fib
2392 * Handles the completion of a scsi command to a non dasd device
2396 static void aac_srb_callback(void *context
, struct fib
* fibptr
)
2398 struct aac_dev
*dev
;
2399 struct aac_srb_reply
*srbreply
;
2400 struct scsi_cmnd
*scsicmd
;
2402 scsicmd
= (struct scsi_cmnd
*) context
;
2404 if (!aac_valid_context(scsicmd
, fibptr
))
2407 BUG_ON(fibptr
== NULL
);
2411 srbreply
= (struct aac_srb_reply
*) fib_data(fibptr
);
2413 scsicmd
->sense_buffer
[0] = '\0'; /* Initialize sense valid flag to false */
2415 * Calculate resid for sg
2418 scsi_set_resid(scsicmd
, scsi_bufflen(scsicmd
)
2419 - le32_to_cpu(srbreply
->data_xfer_length
));
2421 scsi_dma_unmap(scsicmd
);
2424 * First check the fib status
2427 if (le32_to_cpu(srbreply
->status
) != ST_OK
){
2429 printk(KERN_WARNING
"aac_srb_callback: srb failed, status = %d\n", le32_to_cpu(srbreply
->status
));
2430 len
= min_t(u32
, le32_to_cpu(srbreply
->sense_data_size
),
2431 SCSI_SENSE_BUFFERSIZE
);
2432 scsicmd
->result
= DID_ERROR
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_CHECK_CONDITION
;
2433 memcpy(scsicmd
->sense_buffer
, srbreply
->sense_data
, len
);
2437 * Next check the srb status
2439 switch( (le32_to_cpu(srbreply
->srb_status
))&0x3f){
2440 case SRB_STATUS_ERROR_RECOVERY
:
2441 case SRB_STATUS_PENDING
:
2442 case SRB_STATUS_SUCCESS
:
2443 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8;
2445 case SRB_STATUS_DATA_OVERRUN
:
2446 switch(scsicmd
->cmnd
[0]){
2455 if (le32_to_cpu(srbreply
->data_xfer_length
) < scsicmd
->underflow
) {
2456 printk(KERN_WARNING
"aacraid: SCSI CMD underflow\n");
2458 printk(KERN_WARNING
"aacraid: SCSI CMD Data Overrun\n");
2460 scsicmd
->result
= DID_ERROR
<< 16 | COMMAND_COMPLETE
<< 8;
2463 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8;
2467 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8;
2471 case SRB_STATUS_ABORTED
:
2472 scsicmd
->result
= DID_ABORT
<< 16 | ABORT
<< 8;
2474 case SRB_STATUS_ABORT_FAILED
:
2475 // Not sure about this one - but assuming the hba was trying to abort for some reason
2476 scsicmd
->result
= DID_ERROR
<< 16 | ABORT
<< 8;
2478 case SRB_STATUS_PARITY_ERROR
:
2479 scsicmd
->result
= DID_PARITY
<< 16 | MSG_PARITY_ERROR
<< 8;
2481 case SRB_STATUS_NO_DEVICE
:
2482 case SRB_STATUS_INVALID_PATH_ID
:
2483 case SRB_STATUS_INVALID_TARGET_ID
:
2484 case SRB_STATUS_INVALID_LUN
:
2485 case SRB_STATUS_SELECTION_TIMEOUT
:
2486 scsicmd
->result
= DID_NO_CONNECT
<< 16 | COMMAND_COMPLETE
<< 8;
2489 case SRB_STATUS_COMMAND_TIMEOUT
:
2490 case SRB_STATUS_TIMEOUT
:
2491 scsicmd
->result
= DID_TIME_OUT
<< 16 | COMMAND_COMPLETE
<< 8;
2494 case SRB_STATUS_BUSY
:
2495 scsicmd
->result
= DID_BUS_BUSY
<< 16 | COMMAND_COMPLETE
<< 8;
2498 case SRB_STATUS_BUS_RESET
:
2499 scsicmd
->result
= DID_RESET
<< 16 | COMMAND_COMPLETE
<< 8;
2502 case SRB_STATUS_MESSAGE_REJECTED
:
2503 scsicmd
->result
= DID_ERROR
<< 16 | MESSAGE_REJECT
<< 8;
2505 case SRB_STATUS_REQUEST_FLUSHED
:
2506 case SRB_STATUS_ERROR
:
2507 case SRB_STATUS_INVALID_REQUEST
:
2508 case SRB_STATUS_REQUEST_SENSE_FAILED
:
2509 case SRB_STATUS_NO_HBA
:
2510 case SRB_STATUS_UNEXPECTED_BUS_FREE
:
2511 case SRB_STATUS_PHASE_SEQUENCE_FAILURE
:
2512 case SRB_STATUS_BAD_SRB_BLOCK_LENGTH
:
2513 case SRB_STATUS_DELAYED_RETRY
:
2514 case SRB_STATUS_BAD_FUNCTION
:
2515 case SRB_STATUS_NOT_STARTED
:
2516 case SRB_STATUS_NOT_IN_USE
:
2517 case SRB_STATUS_FORCE_ABORT
:
2518 case SRB_STATUS_DOMAIN_VALIDATION_FAIL
:
2520 #ifdef AAC_DETAILED_STATUS_INFO
2521 printk("aacraid: SRB ERROR(%u) %s scsi cmd 0x%x - scsi status 0x%x\n",
2522 le32_to_cpu(srbreply
->srb_status
) & 0x3F,
2523 aac_get_status_string(
2524 le32_to_cpu(srbreply
->srb_status
) & 0x3F),
2526 le32_to_cpu(srbreply
->scsi_status
));
2528 scsicmd
->result
= DID_ERROR
<< 16 | COMMAND_COMPLETE
<< 8;
2531 if (le32_to_cpu(srbreply
->scsi_status
) == SAM_STAT_CHECK_CONDITION
) {
2533 scsicmd
->result
|= SAM_STAT_CHECK_CONDITION
;
2534 len
= min_t(u32
, le32_to_cpu(srbreply
->sense_data_size
),
2535 SCSI_SENSE_BUFFERSIZE
);
2536 #ifdef AAC_DETAILED_STATUS_INFO
2537 printk(KERN_WARNING
"aac_srb_callback: check condition, status = %d len=%d\n",
2538 le32_to_cpu(srbreply
->status
), len
);
2540 memcpy(scsicmd
->sense_buffer
, srbreply
->sense_data
, len
);
2543 * OR in the scsi status (already shifted up a bit)
2545 scsicmd
->result
|= le32_to_cpu(srbreply
->scsi_status
);
2547 aac_fib_complete(fibptr
);
2548 aac_fib_free(fibptr
);
2549 scsicmd
->scsi_done(scsicmd
);
2555 * @scsicmd: the scsi command block
2557 * This routine will form a FIB and fill in the aac_srb from the
2558 * scsicmd passed in.
2561 static int aac_send_srb_fib(struct scsi_cmnd
* scsicmd
)
2563 struct fib
* cmd_fibcontext
;
2564 struct aac_dev
* dev
;
2567 dev
= (struct aac_dev
*)scsicmd
->device
->host
->hostdata
;
2568 if (scmd_id(scsicmd
) >= dev
->maximum_num_physicals
||
2569 scsicmd
->device
->lun
> 7) {
2570 scsicmd
->result
= DID_NO_CONNECT
<< 16;
2571 scsicmd
->scsi_done(scsicmd
);
2576 * Allocate and initialize a Fib then setup a BlockWrite command
2578 if (!(cmd_fibcontext
= aac_fib_alloc(dev
))) {
2581 status
= aac_adapter_scsi(cmd_fibcontext
, scsicmd
);
2584 * Check that the command queued to the controller
2586 if (status
== -EINPROGRESS
) {
2587 scsicmd
->SCp
.phase
= AAC_OWNER_FIRMWARE
;
2591 printk(KERN_WARNING
"aac_srb: aac_fib_send failed with status: %d\n", status
);
2592 aac_fib_complete(cmd_fibcontext
);
2593 aac_fib_free(cmd_fibcontext
);
2598 static unsigned long aac_build_sg(struct scsi_cmnd
* scsicmd
, struct sgmap
* psg
)
2600 struct aac_dev
*dev
;
2601 unsigned long byte_count
= 0;
2604 dev
= (struct aac_dev
*)scsicmd
->device
->host
->hostdata
;
2605 // Get rid of old data
2607 psg
->sg
[0].addr
= 0;
2608 psg
->sg
[0].count
= 0;
2610 nseg
= scsi_dma_map(scsicmd
);
2613 struct scatterlist
*sg
;
2616 psg
->count
= cpu_to_le32(nseg
);
2618 scsi_for_each_sg(scsicmd
, sg
, nseg
, i
) {
2619 psg
->sg
[i
].addr
= cpu_to_le32(sg_dma_address(sg
));
2620 psg
->sg
[i
].count
= cpu_to_le32(sg_dma_len(sg
));
2621 byte_count
+= sg_dma_len(sg
);
2623 /* hba wants the size to be exact */
2624 if (byte_count
> scsi_bufflen(scsicmd
)) {
2625 u32 temp
= le32_to_cpu(psg
->sg
[i
-1].count
) -
2626 (byte_count
- scsi_bufflen(scsicmd
));
2627 psg
->sg
[i
-1].count
= cpu_to_le32(temp
);
2628 byte_count
= scsi_bufflen(scsicmd
);
2630 /* Check for command underflow */
2631 if(scsicmd
->underflow
&& (byte_count
< scsicmd
->underflow
)){
2632 printk(KERN_WARNING
"aacraid: cmd len %08lX cmd underflow %08X\n",
2633 byte_count
, scsicmd
->underflow
);
2640 static unsigned long aac_build_sg64(struct scsi_cmnd
* scsicmd
, struct sgmap64
* psg
)
2642 struct aac_dev
*dev
;
2643 unsigned long byte_count
= 0;
2647 dev
= (struct aac_dev
*)scsicmd
->device
->host
->hostdata
;
2648 // Get rid of old data
2650 psg
->sg
[0].addr
[0] = 0;
2651 psg
->sg
[0].addr
[1] = 0;
2652 psg
->sg
[0].count
= 0;
2654 nseg
= scsi_dma_map(scsicmd
);
2657 struct scatterlist
*sg
;
2660 scsi_for_each_sg(scsicmd
, sg
, nseg
, i
) {
2661 int count
= sg_dma_len(sg
);
2662 addr
= sg_dma_address(sg
);
2663 psg
->sg
[i
].addr
[0] = cpu_to_le32(addr
& 0xffffffff);
2664 psg
->sg
[i
].addr
[1] = cpu_to_le32(addr
>>32);
2665 psg
->sg
[i
].count
= cpu_to_le32(count
);
2666 byte_count
+= count
;
2668 psg
->count
= cpu_to_le32(nseg
);
2669 /* hba wants the size to be exact */
2670 if (byte_count
> scsi_bufflen(scsicmd
)) {
2671 u32 temp
= le32_to_cpu(psg
->sg
[i
-1].count
) -
2672 (byte_count
- scsi_bufflen(scsicmd
));
2673 psg
->sg
[i
-1].count
= cpu_to_le32(temp
);
2674 byte_count
= scsi_bufflen(scsicmd
);
2676 /* Check for command underflow */
2677 if(scsicmd
->underflow
&& (byte_count
< scsicmd
->underflow
)){
2678 printk(KERN_WARNING
"aacraid: cmd len %08lX cmd underflow %08X\n",
2679 byte_count
, scsicmd
->underflow
);
2685 static unsigned long aac_build_sgraw(struct scsi_cmnd
* scsicmd
, struct sgmapraw
* psg
)
2687 unsigned long byte_count
= 0;
2690 // Get rid of old data
2692 psg
->sg
[0].next
= 0;
2693 psg
->sg
[0].prev
= 0;
2694 psg
->sg
[0].addr
[0] = 0;
2695 psg
->sg
[0].addr
[1] = 0;
2696 psg
->sg
[0].count
= 0;
2697 psg
->sg
[0].flags
= 0;
2699 nseg
= scsi_dma_map(scsicmd
);
2702 struct scatterlist
*sg
;
2705 scsi_for_each_sg(scsicmd
, sg
, nseg
, i
) {
2706 int count
= sg_dma_len(sg
);
2707 u64 addr
= sg_dma_address(sg
);
2708 psg
->sg
[i
].next
= 0;
2709 psg
->sg
[i
].prev
= 0;
2710 psg
->sg
[i
].addr
[1] = cpu_to_le32((u32
)(addr
>>32));
2711 psg
->sg
[i
].addr
[0] = cpu_to_le32((u32
)(addr
& 0xffffffff));
2712 psg
->sg
[i
].count
= cpu_to_le32(count
);
2713 psg
->sg
[i
].flags
= 0;
2714 byte_count
+= count
;
2716 psg
->count
= cpu_to_le32(nseg
);
2717 /* hba wants the size to be exact */
2718 if (byte_count
> scsi_bufflen(scsicmd
)) {
2719 u32 temp
= le32_to_cpu(psg
->sg
[i
-1].count
) -
2720 (byte_count
- scsi_bufflen(scsicmd
));
2721 psg
->sg
[i
-1].count
= cpu_to_le32(temp
);
2722 byte_count
= scsi_bufflen(scsicmd
);
2724 /* Check for command underflow */
2725 if(scsicmd
->underflow
&& (byte_count
< scsicmd
->underflow
)){
2726 printk(KERN_WARNING
"aacraid: cmd len %08lX cmd underflow %08X\n",
2727 byte_count
, scsicmd
->underflow
);
2733 #ifdef AAC_DETAILED_STATUS_INFO
2735 struct aac_srb_status_info
{
2741 static struct aac_srb_status_info srb_status_info
[] = {
2742 { SRB_STATUS_PENDING
, "Pending Status"},
2743 { SRB_STATUS_SUCCESS
, "Success"},
2744 { SRB_STATUS_ABORTED
, "Aborted Command"},
2745 { SRB_STATUS_ABORT_FAILED
, "Abort Failed"},
2746 { SRB_STATUS_ERROR
, "Error Event"},
2747 { SRB_STATUS_BUSY
, "Device Busy"},
2748 { SRB_STATUS_INVALID_REQUEST
, "Invalid Request"},
2749 { SRB_STATUS_INVALID_PATH_ID
, "Invalid Path ID"},
2750 { SRB_STATUS_NO_DEVICE
, "No Device"},
2751 { SRB_STATUS_TIMEOUT
, "Timeout"},
2752 { SRB_STATUS_SELECTION_TIMEOUT
, "Selection Timeout"},
2753 { SRB_STATUS_COMMAND_TIMEOUT
, "Command Timeout"},
2754 { SRB_STATUS_MESSAGE_REJECTED
, "Message Rejected"},
2755 { SRB_STATUS_BUS_RESET
, "Bus Reset"},
2756 { SRB_STATUS_PARITY_ERROR
, "Parity Error"},
2757 { SRB_STATUS_REQUEST_SENSE_FAILED
,"Request Sense Failed"},
2758 { SRB_STATUS_NO_HBA
, "No HBA"},
2759 { SRB_STATUS_DATA_OVERRUN
, "Data Overrun/Data Underrun"},
2760 { SRB_STATUS_UNEXPECTED_BUS_FREE
,"Unexpected Bus Free"},
2761 { SRB_STATUS_PHASE_SEQUENCE_FAILURE
,"Phase Error"},
2762 { SRB_STATUS_BAD_SRB_BLOCK_LENGTH
,"Bad Srb Block Length"},
2763 { SRB_STATUS_REQUEST_FLUSHED
, "Request Flushed"},
2764 { SRB_STATUS_DELAYED_RETRY
, "Delayed Retry"},
2765 { SRB_STATUS_INVALID_LUN
, "Invalid LUN"},
2766 { SRB_STATUS_INVALID_TARGET_ID
, "Invalid TARGET ID"},
2767 { SRB_STATUS_BAD_FUNCTION
, "Bad Function"},
2768 { SRB_STATUS_ERROR_RECOVERY
, "Error Recovery"},
2769 { SRB_STATUS_NOT_STARTED
, "Not Started"},
2770 { SRB_STATUS_NOT_IN_USE
, "Not In Use"},
2771 { SRB_STATUS_FORCE_ABORT
, "Force Abort"},
2772 { SRB_STATUS_DOMAIN_VALIDATION_FAIL
,"Domain Validation Failure"},
2773 { 0xff, "Unknown Error"}
2776 char *aac_get_status_string(u32 status
)
2780 for (i
= 0; i
< ARRAY_SIZE(srb_status_info
); i
++)
2781 if (srb_status_info
[i
].status
== status
)
2782 return srb_status_info
[i
].str
;
2784 return "Bad Status Code";