Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

[wrt350n-kernel.git] / include / asm-ia64 / sn / sn_sal.h

#ifndef _ASM_IA64_SN_SN_SAL_H
#define _ASM_IA64_SN_SN_SAL_H

/*
 * System Abstraction Layer definitions for IA64
 *
 * This file is subject to the terms and conditions of the GNU General Public
 * License.  See the file "COPYING" in the main directory of this archive
 * for more details.
 *
 * Copyright (c) 2000-2006 Silicon Graphics, Inc.  All rights reserved.
 */


#include <asm/sal.h>
#include <asm/sn/sn_cpuid.h>
#include <asm/sn/arch.h>
#include <asm/sn/geo.h>
#include <asm/sn/nodepda.h>
#include <asm/sn/shub_mmr.h>

// SGI Specific Calls
#define  SN_SAL_POD_MODE                           0x02000001
#define  SN_SAL_SYSTEM_RESET                       0x02000002
#define  SN_SAL_PROBE                              0x02000003
#define  SN_SAL_GET_MASTER_NASID                   0x02000004
#define  SN_SAL_GET_KLCONFIG_ADDR                  0x02000005
#define  SN_SAL_LOG_CE                             0x02000006
#define  SN_SAL_REGISTER_CE                        0x02000007
#define  SN_SAL_GET_PARTITION_ADDR                 0x02000009
#define  SN_SAL_XP_ADDR_REGION                     0x0200000f
#define  SN_SAL_NO_FAULT_ZONE_VIRTUAL              0x02000010
#define  SN_SAL_NO_FAULT_ZONE_PHYSICAL             0x02000011
#define  SN_SAL_PRINT_ERROR                        0x02000012
#define  SN_SAL_REGISTER_PMI_HANDLER               0x02000014
#define  SN_SAL_SET_ERROR_HANDLING_FEATURES        0x0200001a   // reentrant
#define  SN_SAL_GET_FIT_COMPT                      0x0200001b   // reentrant
#define  SN_SAL_GET_SAPIC_INFO                     0x0200001d
#define  SN_SAL_GET_SN_INFO                        0x0200001e
#define  SN_SAL_CONSOLE_PUTC                       0x02000021
#define  SN_SAL_CONSOLE_GETC                       0x02000022
#define  SN_SAL_CONSOLE_PUTS                       0x02000023
#define  SN_SAL_CONSOLE_GETS                       0x02000024
#define  SN_SAL_CONSOLE_GETS_TIMEOUT               0x02000025
#define  SN_SAL_CONSOLE_POLL                       0x02000026
#define  SN_SAL_CONSOLE_INTR                       0x02000027
#define  SN_SAL_CONSOLE_PUTB                       0x02000028
#define  SN_SAL_CONSOLE_XMIT_CHARS                 0x0200002a
#define  SN_SAL_CONSOLE_READC                      0x0200002b
#define  SN_SAL_SYSCTL_OP                          0x02000030
#define  SN_SAL_SYSCTL_MODID_GET                   0x02000031
#define  SN_SAL_SYSCTL_GET                         0x02000032
#define  SN_SAL_SYSCTL_IOBRICK_MODULE_GET          0x02000033
#define  SN_SAL_SYSCTL_IO_PORTSPEED_GET            0x02000035
#define  SN_SAL_SYSCTL_SLAB_GET                    0x02000036
#define  SN_SAL_BUS_CONFIG                         0x02000037
#define  SN_SAL_SYS_SERIAL_GET                     0x02000038
#define  SN_SAL_PARTITION_SERIAL_GET               0x02000039
#define  SN_SAL_SYSCTL_PARTITION_GET               0x0200003a
#define  SN_SAL_SYSTEM_POWER_DOWN                  0x0200003b
#define  SN_SAL_GET_MASTER_BASEIO_NASID            0x0200003c
#define  SN_SAL_COHERENCE                          0x0200003d
#define  SN_SAL_MEMPROTECT                         0x0200003e
#define  SN_SAL_SYSCTL_FRU_CAPTURE                 0x0200003f

#define  SN_SAL_SYSCTL_IOBRICK_PCI_OP              0x02000042   // reentrant
#define  SN_SAL_IROUTER_OP                         0x02000043
#define  SN_SAL_SYSCTL_EVENT                       0x02000044
#define  SN_SAL_IOIF_INTERRUPT                     0x0200004a
#define  SN_SAL_HWPERF_OP                          0x02000050   // lock
#define  SN_SAL_IOIF_ERROR_INTERRUPT               0x02000051
#define  SN_SAL_IOIF_PCI_SAFE                      0x02000052
#define  SN_SAL_IOIF_SLOT_ENABLE                   0x02000053
#define  SN_SAL_IOIF_SLOT_DISABLE                  0x02000054
#define  SN_SAL_IOIF_GET_HUBDEV_INFO               0x02000055
#define  SN_SAL_IOIF_GET_PCIBUS_INFO               0x02000056
#define  SN_SAL_IOIF_GET_PCIDEV_INFO               0x02000057
#define  SN_SAL_IOIF_GET_WIDGET_DMAFLUSH_LIST      0x02000058   // deprecated
#define  SN_SAL_IOIF_GET_DEVICE_DMAFLUSH_LIST      0x0200005a

#define SN_SAL_IOIF_INIT                           0x0200005f
#define SN_SAL_HUB_ERROR_INTERRUPT                 0x02000060
#define SN_SAL_BTE_RECOVER                         0x02000061
#define SN_SAL_RESERVED_DO_NOT_USE                 0x02000062
#define SN_SAL_IOIF_GET_PCI_TOPOLOGY               0x02000064

#define  SN_SAL_GET_PROM_FEATURE_SET               0x02000065
#define  SN_SAL_SET_OS_FEATURE_SET                 0x02000066
#define  SN_SAL_INJECT_ERROR                       0x02000067
#define  SN_SAL_SET_CPU_NUMBER                     0x02000068

#define  SN_SAL_KERNEL_LAUNCH_EVENT                0x02000069

/*
 * Service-specific constants
 */

/* Console interrupt manipulation */
        /* action codes */
#define SAL_CONSOLE_INTR_OFF    0       /* turn the interrupt off */
#define SAL_CONSOLE_INTR_ON     1       /* turn the interrupt on */
#define SAL_CONSOLE_INTR_STATUS 2       /* retrieve the interrupt status */
        /* interrupt specification & status return codes */
#define SAL_CONSOLE_INTR_XMIT   1       /* output interrupt */
#define SAL_CONSOLE_INTR_RECV   2       /* input interrupt */

/* interrupt handling */
#define SAL_INTR_ALLOC          1
#define SAL_INTR_FREE           2
#define SAL_INTR_REDIRECT       3

/*
 * operations available on the generic SN_SAL_SYSCTL_OP
 * runtime service
 */
#define SAL_SYSCTL_OP_IOBOARD           0x0001  /*  retrieve board type */
#define SAL_SYSCTL_OP_TIO_JLCK_RST      0x0002  /* issue TIO clock reset */

/*
 * IRouter (i.e. generalized system controller) operations
 */
#define SAL_IROUTER_OPEN        0       /* open a subchannel */
#define SAL_IROUTER_CLOSE       1       /* close a subchannel */
#define SAL_IROUTER_SEND        2       /* send part of an IRouter packet */
#define SAL_IROUTER_RECV        3       /* receive part of an IRouter packet */
#define SAL_IROUTER_INTR_STATUS 4       /* check the interrupt status for
                                         * an open subchannel
                                         */
#define SAL_IROUTER_INTR_ON     5       /* enable an interrupt */
#define SAL_IROUTER_INTR_OFF    6       /* disable an interrupt */
#define SAL_IROUTER_INIT        7       /* initialize IRouter driver */

/* IRouter interrupt mask bits */
#define SAL_IROUTER_INTR_XMIT   SAL_CONSOLE_INTR_XMIT
#define SAL_IROUTER_INTR_RECV   SAL_CONSOLE_INTR_RECV

/*
 * Error Handling Features
 */
#define SAL_ERR_FEAT_MCA_SLV_TO_OS_INIT_SLV     0x1     // obsolete
#define SAL_ERR_FEAT_LOG_SBES                   0x2     // obsolete
#define SAL_ERR_FEAT_MFR_OVERRIDE               0x4
#define SAL_ERR_FEAT_SBE_THRESHOLD              0xffff0000

/*
 * SAL Error Codes
 */
#define SALRET_MORE_PASSES      1
#define SALRET_OK               0
#define SALRET_NOT_IMPLEMENTED  (-1)
#define SALRET_INVALID_ARG      (-2)
#define SALRET_ERROR            (-3)

#define SN_SAL_FAKE_PROM                           0x02009999

/**
  * sn_sal_revision - get the SGI SAL revision number
  *
  * The SGI PROM stores its version in the sal_[ab]_rev_(major|minor).
  * This routine simply extracts the major and minor values and
  * presents them in a u32 format.
  *
  * For example, version 4.05 would be represented at 0x0405.
  */
static inline u32
sn_sal_rev(void)
{
        struct ia64_sal_systab *systab = __va(efi.sal_systab);

        return (u32)(systab->sal_b_rev_major << 8 | systab->sal_b_rev_minor);
}

/*
 * Returns the master console nasid, if the call fails, return an illegal
 * value.
 */
static inline u64
ia64_sn_get_console_nasid(void)
{
        struct ia64_sal_retval ret_stuff;

        ret_stuff.status = 0;
        ret_stuff.v0 = 0;
        ret_stuff.v1 = 0;
        ret_stuff.v2 = 0;
        SAL_CALL(ret_stuff, SN_SAL_GET_MASTER_NASID, 0, 0, 0, 0, 0, 0, 0);

        if (ret_stuff.status < 0)
                return ret_stuff.status;

        /* Master console nasid is in 'v0' */
        return ret_stuff.v0;
}

/*
 * Returns the master baseio nasid, if the call fails, return an illegal
 * value.
 */
static inline u64
ia64_sn_get_master_baseio_nasid(void)
{
        struct ia64_sal_retval ret_stuff;

        ret_stuff.status = 0;
        ret_stuff.v0 = 0;
        ret_stuff.v1 = 0;
        ret_stuff.v2 = 0;
        SAL_CALL(ret_stuff, SN_SAL_GET_MASTER_BASEIO_NASID, 0, 0, 0, 0, 0, 0, 0);

        if (ret_stuff.status < 0)
                return ret_stuff.status;

        /* Master baseio nasid is in 'v0' */
        return ret_stuff.v0;
}

static inline void *
ia64_sn_get_klconfig_addr(nasid_t nasid)
{
        struct ia64_sal_retval ret_stuff;

        ret_stuff.status = 0;
        ret_stuff.v0 = 0;
        ret_stuff.v1 = 0;
        ret_stuff.v2 = 0;
        SAL_CALL(ret_stuff, SN_SAL_GET_KLCONFIG_ADDR, (u64)nasid, 0, 0, 0, 0, 0, 0);
        return ret_stuff.v0 ? __va(ret_stuff.v0) : NULL;
}

/*
 * Returns the next console character.
 */
static inline u64
ia64_sn_console_getc(int *ch)
{
        struct ia64_sal_retval ret_stuff;

        ret_stuff.status = 0;
        ret_stuff.v0 = 0;
        ret_stuff.v1 = 0;
        ret_stuff.v2 = 0;
        SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_GETC, 0, 0, 0, 0, 0, 0, 0);

        /* character is in 'v0' */
        *ch = (int)ret_stuff.v0;

        return ret_stuff.status;
}

/*
 * Read a character from the SAL console device, after a previous interrupt
 * or poll operation has given us to know that a character is available
 * to be read.
 */
static inline u64
ia64_sn_console_readc(void)
{
        struct ia64_sal_retval ret_stuff;

        ret_stuff.status = 0;
        ret_stuff.v0 = 0;
        ret_stuff.v1 = 0;
        ret_stuff.v2 = 0;
        SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_READC, 0, 0, 0, 0, 0, 0, 0);

        /* character is in 'v0' */
        return ret_stuff.v0;
}

/*
 * Sends the given character to the console.
 */
static inline u64
ia64_sn_console_putc(char ch)
{
        struct ia64_sal_retval ret_stuff;

        ret_stuff.status = 0;
        ret_stuff.v0 = 0;
        ret_stuff.v1 = 0;
        ret_stuff.v2 = 0;
        SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_PUTC, (u64)ch, 0, 0, 0, 0, 0, 0);

        return ret_stuff.status;
}

/*
 * Sends the given buffer to the console.
 */
static inline u64
ia64_sn_console_putb(const char *buf, int len)
{
        struct ia64_sal_retval ret_stuff;

        ret_stuff.status = 0;
        ret_stuff.v0 = 0; 
        ret_stuff.v1 = 0;
        ret_stuff.v2 = 0;
        SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_PUTB, (u64)buf, (u64)len, 0, 0, 0, 0, 0);

        if ( ret_stuff.status == 0 ) {
                return ret_stuff.v0;
        }
        return (u64)0;
}

/*
 * Print a platform error record
 */
static inline u64
ia64_sn_plat_specific_err_print(int (*hook)(const char*, ...), char *rec)
{
        struct ia64_sal_retval ret_stuff;

        ret_stuff.status = 0;
        ret_stuff.v0 = 0;
        ret_stuff.v1 = 0;
        ret_stuff.v2 = 0;
        SAL_CALL_REENTRANT(ret_stuff, SN_SAL_PRINT_ERROR, (u64)hook, (u64)rec, 0, 0, 0, 0, 0);

        return ret_stuff.status;
}

/*
 * Check for Platform errors
 */
static inline u64
ia64_sn_plat_cpei_handler(void)
{
        struct ia64_sal_retval ret_stuff;

        ret_stuff.status = 0;
        ret_stuff.v0 = 0;
        ret_stuff.v1 = 0;
        ret_stuff.v2 = 0;
        SAL_CALL_NOLOCK(ret_stuff, SN_SAL_LOG_CE, 0, 0, 0, 0, 0, 0, 0);

        return ret_stuff.status;
}

/*
 * Set Error Handling Features  (Obsolete)
 */
static inline u64
ia64_sn_plat_set_error_handling_features(void)
{
        struct ia64_sal_retval ret_stuff;

        ret_stuff.status = 0;
        ret_stuff.v0 = 0;
        ret_stuff.v1 = 0;
        ret_stuff.v2 = 0;
        SAL_CALL_REENTRANT(ret_stuff, SN_SAL_SET_ERROR_HANDLING_FEATURES,
                SAL_ERR_FEAT_LOG_SBES,
                0, 0, 0, 0, 0, 0);

        return ret_stuff.status;
}

/*
 * Checks for console input.
 */
static inline u64
ia64_sn_console_check(int *result)
{
        struct ia64_sal_retval ret_stuff;

        ret_stuff.status = 0;
        ret_stuff.v0 = 0;
        ret_stuff.v1 = 0;
        ret_stuff.v2 = 0;
        SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_POLL, 0, 0, 0, 0, 0, 0, 0);

        /* result is in 'v0' */
        *result = (int)ret_stuff.v0;

        return ret_stuff.status;
}

/*
 * Checks console interrupt status
 */
static inline u64
ia64_sn_console_intr_status(void)
{
        struct ia64_sal_retval ret_stuff;

        ret_stuff.status = 0;
        ret_stuff.v0 = 0;
        ret_stuff.v1 = 0;
        ret_stuff.v2 = 0;
        SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_INTR, 
                 0, SAL_CONSOLE_INTR_STATUS,
                 0, 0, 0, 0, 0);

        if (ret_stuff.status == 0) {
            return ret_stuff.v0;
        }
        
        return 0;
}

/*
 * Enable an interrupt on the SAL console device.
 */
static inline void
ia64_sn_console_intr_enable(u64 intr)
{
        struct ia64_sal_retval ret_stuff;

        ret_stuff.status = 0;
        ret_stuff.v0 = 0;
        ret_stuff.v1 = 0;
        ret_stuff.v2 = 0;
        SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_INTR, 
                 intr, SAL_CONSOLE_INTR_ON,
                 0, 0, 0, 0, 0);
}

/*
 * Disable an interrupt on the SAL console device.
 */
static inline void
ia64_sn_console_intr_disable(u64 intr)
{
        struct ia64_sal_retval ret_stuff;

        ret_stuff.status = 0;
        ret_stuff.v0 = 0;
        ret_stuff.v1 = 0;
        ret_stuff.v2 = 0;
        SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_INTR, 
                 intr, SAL_CONSOLE_INTR_OFF,
                 0, 0, 0, 0, 0);
}

/*
 * Sends a character buffer to the console asynchronously.
 */
static inline u64
ia64_sn_console_xmit_chars(char *buf, int len)
{
        struct ia64_sal_retval ret_stuff;

        ret_stuff.status = 0;
        ret_stuff.v0 = 0;
        ret_stuff.v1 = 0;
        ret_stuff.v2 = 0;
        SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_XMIT_CHARS,
                 (u64)buf, (u64)len,
                 0, 0, 0, 0, 0);

        if (ret_stuff.status == 0) {
            return ret_stuff.v0;
        }

        return 0;
}

/*
 * Returns the iobrick module Id
 */
static inline u64
ia64_sn_sysctl_iobrick_module_get(nasid_t nasid, int *result)
{
        struct ia64_sal_retval ret_stuff;

        ret_stuff.status = 0;
        ret_stuff.v0 = 0;
        ret_stuff.v1 = 0;
        ret_stuff.v2 = 0;
        SAL_CALL_NOLOCK(ret_stuff, SN_SAL_SYSCTL_IOBRICK_MODULE_GET, nasid, 0, 0, 0, 0, 0, 0);

        /* result is in 'v0' */
        *result = (int)ret_stuff.v0;

        return ret_stuff.status;
}

/**
 * ia64_sn_pod_mode - call the SN_SAL_POD_MODE function
 *
 * SN_SAL_POD_MODE actually takes an argument, but it's always
 * 0 when we call it from the kernel, so we don't have to expose
 * it to the caller.
 */
static inline u64
ia64_sn_pod_mode(void)
{
        struct ia64_sal_retval isrv;
        SAL_CALL_REENTRANT(isrv, SN_SAL_POD_MODE, 0, 0, 0, 0, 0, 0, 0);
        if (isrv.status)
                return 0;
        return isrv.v0;
}

/**
 * ia64_sn_probe_mem - read from memory safely
 * @addr: address to probe
 * @size: number bytes to read (1,2,4,8)
 * @data_ptr: address to store value read by probe (-1 returned if probe fails)
 *
 * Call into the SAL to do a memory read.  If the read generates a machine
 * check, this routine will recover gracefully and return -1 to the caller.
 * @addr is usually a kernel virtual address in uncached space (i.e. the
 * address starts with 0xc), but if called in physical mode, @addr should
 * be a physical address.
 *
 * Return values:
 *  0 - probe successful
 *  1 - probe failed (generated MCA)
 *  2 - Bad arg
 * <0 - PAL error
 */
static inline u64
ia64_sn_probe_mem(long addr, long size, void *data_ptr)
{
        struct ia64_sal_retval isrv;

        SAL_CALL(isrv, SN_SAL_PROBE, addr, size, 0, 0, 0, 0, 0);

        if (data_ptr) {
                switch (size) {
                case 1:
                        *((u8*)data_ptr) = (u8)isrv.v0;
                        break;
                case 2:
                        *((u16*)data_ptr) = (u16)isrv.v0;
                        break;
                case 4:
                        *((u32*)data_ptr) = (u32)isrv.v0;
                        break;
                case 8:
                        *((u64*)data_ptr) = (u64)isrv.v0;
                        break;
                default:
                        isrv.status = 2;
                }
        }
        return isrv.status;
}

/*
 * Retrieve the system serial number as an ASCII string.
 */
static inline u64
ia64_sn_sys_serial_get(char *buf)
{
        struct ia64_sal_retval ret_stuff;
        SAL_CALL_NOLOCK(ret_stuff, SN_SAL_SYS_SERIAL_GET, buf, 0, 0, 0, 0, 0, 0);
        return ret_stuff.status;
}

extern char sn_system_serial_number_string[];
extern u64 sn_partition_serial_number;

static inline char *
sn_system_serial_number(void) {
        if (sn_system_serial_number_string[0]) {
                return(sn_system_serial_number_string);
        } else {
                ia64_sn_sys_serial_get(sn_system_serial_number_string);
                return(sn_system_serial_number_string);
        }
}
        

/*
 * Returns a unique id number for this system and partition (suitable for
 * use with license managers), based in part on the system serial number.
 */
static inline u64
ia64_sn_partition_serial_get(void)
{
        struct ia64_sal_retval ret_stuff;
        ia64_sal_oemcall_reentrant(&ret_stuff, SN_SAL_PARTITION_SERIAL_GET, 0,
                                   0, 0, 0, 0, 0, 0);
        if (ret_stuff.status != 0)
            return 0;
        return ret_stuff.v0;
}

static inline u64
sn_partition_serial_number_val(void) {
        if (unlikely(sn_partition_serial_number == 0)) {
                sn_partition_serial_number = ia64_sn_partition_serial_get();
        }
        return sn_partition_serial_number;
}

/*
 * Returns the partition id of the nasid passed in as an argument,
 * or INVALID_PARTID if the partition id cannot be retrieved.
 */
static inline partid_t
ia64_sn_sysctl_partition_get(nasid_t nasid)
{
        struct ia64_sal_retval ret_stuff;
        SAL_CALL(ret_stuff, SN_SAL_SYSCTL_PARTITION_GET, nasid,
                0, 0, 0, 0, 0, 0);
        if (ret_stuff.status != 0)
            return -1;
        return ((partid_t)ret_stuff.v0);
}

/*
 * Returns the physical address of the partition's reserved page through
 * an iterative number of calls.
 *
 * On first call, 'cookie' and 'len' should be set to 0, and 'addr'
 * set to the nasid of the partition whose reserved page's address is
 * being sought.
 * On subsequent calls, pass the values, that were passed back on the
 * previous call.
 *
 * While the return status equals SALRET_MORE_PASSES, keep calling
 * this function after first copying 'len' bytes starting at 'addr'
 * into 'buf'. Once the return status equals SALRET_OK, 'addr' will
 * be the physical address of the partition's reserved page. If the
 * return status equals neither of these, an error as occurred.
 */
static inline s64
sn_partition_reserved_page_pa(u64 buf, u64 *cookie, u64 *addr, u64 *len)
{
        struct ia64_sal_retval rv;
        ia64_sal_oemcall_reentrant(&rv, SN_SAL_GET_PARTITION_ADDR, *cookie,
                                   *addr, buf, *len, 0, 0, 0);
        *cookie = rv.v0;
        *addr = rv.v1;
        *len = rv.v2;
        return rv.status;
}

/*
 * Register or unregister a physical address range being referenced across
 * a partition boundary for which certain SAL errors should be scanned for,
 * cleaned up and ignored.  This is of value for kernel partitioning code only.
 * Values for the operation argument:
 *      1 = register this address range with SAL
 *      0 = unregister this address range with SAL
 * 
 * SAL maintains a reference count on an address range in case it is registered
 * multiple times.
 * 
 * On success, returns the reference count of the address range after the SAL
 * call has performed the current registration/unregistration.  Returns a
 * negative value if an error occurred.
 */
static inline int
sn_register_xp_addr_region(u64 paddr, u64 len, int operation)
{
        struct ia64_sal_retval ret_stuff;
        ia64_sal_oemcall(&ret_stuff, SN_SAL_XP_ADDR_REGION, paddr, len,
                         (u64)operation, 0, 0, 0, 0);
        return ret_stuff.status;
}

/*
 * Register or unregister an instruction range for which SAL errors should
 * be ignored.  If an error occurs while in the registered range, SAL jumps
 * to return_addr after ignoring the error.  Values for the operation argument:
 *      1 = register this instruction range with SAL
 *      0 = unregister this instruction range with SAL
 *
 * Returns 0 on success, or a negative value if an error occurred.
 */
static inline int
sn_register_nofault_code(u64 start_addr, u64 end_addr, u64 return_addr,
                         int virtual, int operation)
{
        struct ia64_sal_retval ret_stuff;
        u64 call;
        if (virtual) {
                call = SN_SAL_NO_FAULT_ZONE_VIRTUAL;
        } else {
                call = SN_SAL_NO_FAULT_ZONE_PHYSICAL;
        }
        ia64_sal_oemcall(&ret_stuff, call, start_addr, end_addr, return_addr,
                         (u64)1, 0, 0, 0);
        return ret_stuff.status;
}

/*
 * Register or unregister a function to handle a PMI received by a CPU.
 * Before calling the registered handler, SAL sets r1 to the value that
 * was passed in as the global_pointer.
 *
 * If the handler pointer is NULL, then the currently registered handler
 * will be unregistered.
 *
 * Returns 0 on success, or a negative value if an error occurred.
 */
static inline int
sn_register_pmi_handler(u64 handler, u64 global_pointer)
{
        struct ia64_sal_retval ret_stuff;
        ia64_sal_oemcall(&ret_stuff, SN_SAL_REGISTER_PMI_HANDLER, handler,
                         global_pointer, 0, 0, 0, 0, 0);
        return ret_stuff.status;
}

/*
 * Change or query the coherence domain for this partition. Each cpu-based
 * nasid is represented by a bit in an array of 64-bit words:
 *      0 = not in this partition's coherency domain
 *      1 = in this partition's coherency domain
 *
 * It is not possible for the local system's nasids to be removed from
 * the coherency domain.  Purpose of the domain arguments:
 *      new_domain = set the coherence domain to the given nasids
 *      old_domain = return the current coherence domain
 *
 * Returns 0 on success, or a negative value if an error occurred.
 */
static inline int
sn_change_coherence(u64 *new_domain, u64 *old_domain)
{
        struct ia64_sal_retval ret_stuff;
        ia64_sal_oemcall_nolock(&ret_stuff, SN_SAL_COHERENCE, (u64)new_domain,
                                (u64)old_domain, 0, 0, 0, 0, 0);
        return ret_stuff.status;
}

/*
 * Change memory access protections for a physical address range.
 * nasid_array is not used on Altix, but may be in future architectures.
 * Available memory protection access classes are defined after the function.
 */
static inline int
sn_change_memprotect(u64 paddr, u64 len, u64 perms, u64 *nasid_array)
{
        struct ia64_sal_retval ret_stuff;

        ia64_sal_oemcall_nolock(&ret_stuff, SN_SAL_MEMPROTECT, paddr, len,
                                (u64)nasid_array, perms, 0, 0, 0);
        return ret_stuff.status;
}
#define SN_MEMPROT_ACCESS_CLASS_0               0x14a080
#define SN_MEMPROT_ACCESS_CLASS_1               0x2520c2
#define SN_MEMPROT_ACCESS_CLASS_2               0x14a1ca
#define SN_MEMPROT_ACCESS_CLASS_3               0x14a290
#define SN_MEMPROT_ACCESS_CLASS_6               0x084080
#define SN_MEMPROT_ACCESS_CLASS_7               0x021080

/*
 * Turns off system power.
 */
static inline void
ia64_sn_power_down(void)
{
        struct ia64_sal_retval ret_stuff;
        SAL_CALL(ret_stuff, SN_SAL_SYSTEM_POWER_DOWN, 0, 0, 0, 0, 0, 0, 0);
        while(1)
                cpu_relax();
        /* never returns */
}

/**
 * ia64_sn_fru_capture - tell the system controller to capture hw state
 *
 * This routine will call the SAL which will tell the system controller(s)
 * to capture hw mmr information from each SHub in the system.
 */
static inline u64
ia64_sn_fru_capture(void)
{
        struct ia64_sal_retval isrv;
        SAL_CALL(isrv, SN_SAL_SYSCTL_FRU_CAPTURE, 0, 0, 0, 0, 0, 0, 0);
        if (isrv.status)
                return 0;
        return isrv.v0;
}

/*
 * Performs an operation on a PCI bus or slot -- power up, power down
 * or reset.
 */
static inline u64
ia64_sn_sysctl_iobrick_pci_op(nasid_t n, u64 connection_type, 
                              u64 bus, char slot, 
                              u64 action)
{
        struct ia64_sal_retval rv = {0, 0, 0, 0};

        SAL_CALL_NOLOCK(rv, SN_SAL_SYSCTL_IOBRICK_PCI_OP, connection_type, n, action,
                 bus, (u64) slot, 0, 0);
        if (rv.status)
                return rv.v0;
        return 0;
}


/*
 * Open a subchannel for sending arbitrary data to the system
 * controller network via the system controller device associated with
 * 'nasid'.  Return the subchannel number or a negative error code.
 */
static inline int
ia64_sn_irtr_open(nasid_t nasid)
{
        struct ia64_sal_retval rv;
        SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_OPEN, nasid,
                           0, 0, 0, 0, 0);
        return (int) rv.v0;
}

/*
 * Close system controller subchannel 'subch' previously opened on 'nasid'.
 */
static inline int
ia64_sn_irtr_close(nasid_t nasid, int subch)
{
        struct ia64_sal_retval rv;
        SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_CLOSE,
                           (u64) nasid, (u64) subch, 0, 0, 0, 0);
        return (int) rv.status;
}

/*
 * Read data from system controller associated with 'nasid' on
 * subchannel 'subch'.  The buffer to be filled is pointed to by
 * 'buf', and its capacity is in the integer pointed to by 'len'.  The
 * referent of 'len' is set to the number of bytes read by the SAL
 * call.  The return value is either SALRET_OK (for bytes read) or
 * SALRET_ERROR (for error or "no data available").
 */
static inline int
ia64_sn_irtr_recv(nasid_t nasid, int subch, char *buf, int *len)
{
        struct ia64_sal_retval rv;
        SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_RECV,
                           (u64) nasid, (u64) subch, (u64) buf, (u64) len,
                           0, 0);
        return (int) rv.status;
}

/*
 * Write data to the system controller network via the system
 * controller associated with 'nasid' on suchannel 'subch'.  The
 * buffer to be written out is pointed to by 'buf', and 'len' is the
 * number of bytes to be written.  The return value is either the
 * number of bytes written (which could be zero) or a negative error
 * code.
 */
static inline int
ia64_sn_irtr_send(nasid_t nasid, int subch, char *buf, int len)
{
        struct ia64_sal_retval rv;
        SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_SEND,
                           (u64) nasid, (u64) subch, (u64) buf, (u64) len,
                           0, 0);
        return (int) rv.v0;
}

/*
 * Check whether any interrupts are pending for the system controller
 * associated with 'nasid' and its subchannel 'subch'.  The return
 * value is a mask of pending interrupts (SAL_IROUTER_INTR_XMIT and/or
 * SAL_IROUTER_INTR_RECV).
 */
static inline int
ia64_sn_irtr_intr(nasid_t nasid, int subch)
{
        struct ia64_sal_retval rv;
        SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_INTR_STATUS,
                           (u64) nasid, (u64) subch, 0, 0, 0, 0);
        return (int) rv.v0;
}

/*
 * Enable the interrupt indicated by the intr parameter (either
 * SAL_IROUTER_INTR_XMIT or SAL_IROUTER_INTR_RECV).
 */
static inline int
ia64_sn_irtr_intr_enable(nasid_t nasid, int subch, u64 intr)
{
        struct ia64_sal_retval rv;
        SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_INTR_ON,
                           (u64) nasid, (u64) subch, intr, 0, 0, 0);
        return (int) rv.v0;
}

/*
 * Disable the interrupt indicated by the intr parameter (either
 * SAL_IROUTER_INTR_XMIT or SAL_IROUTER_INTR_RECV).
 */
static inline int
ia64_sn_irtr_intr_disable(nasid_t nasid, int subch, u64 intr)
{
        struct ia64_sal_retval rv;
        SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_INTR_OFF,
                           (u64) nasid, (u64) subch, intr, 0, 0, 0);
        return (int) rv.v0;
}

/*
 * Set up a node as the point of contact for system controller
 * environmental event delivery.
 */
static inline int
ia64_sn_sysctl_event_init(nasid_t nasid)
{
        struct ia64_sal_retval rv;
        SAL_CALL_REENTRANT(rv, SN_SAL_SYSCTL_EVENT, (u64) nasid,
                           0, 0, 0, 0, 0, 0);
        return (int) rv.v0;
}

/*
 * Ask the system controller on the specified nasid to reset
 * the CX corelet clock.  Only valid on TIO nodes.
 */
static inline int
ia64_sn_sysctl_tio_clock_reset(nasid_t nasid)
{
        struct ia64_sal_retval rv;
        SAL_CALL_REENTRANT(rv, SN_SAL_SYSCTL_OP, SAL_SYSCTL_OP_TIO_JLCK_RST,
                        nasid, 0, 0, 0, 0, 0);
        if (rv.status != 0)
                return (int)rv.status;
        if (rv.v0 != 0)
                return (int)rv.v0;

        return 0;
}

/*
 * Get the associated ioboard type for a given nasid.
 */
static inline s64
ia64_sn_sysctl_ioboard_get(nasid_t nasid, u16 *ioboard)
{
        struct ia64_sal_retval isrv;
        SAL_CALL_REENTRANT(isrv, SN_SAL_SYSCTL_OP, SAL_SYSCTL_OP_IOBOARD,
                           nasid, 0, 0, 0, 0, 0);
        if (isrv.v0 != 0) {
                *ioboard = isrv.v0;
                return isrv.status;
        }
        if (isrv.v1 != 0) {
                *ioboard = isrv.v1;
                return isrv.status;
        }

        return isrv.status;
}

/**
 * ia64_sn_get_fit_compt - read a FIT entry from the PROM header
 * @nasid: NASID of node to read
 * @index: FIT entry index to be retrieved (0..n)
 * @fitentry: 16 byte buffer where FIT entry will be stored.
 * @banbuf: optional buffer for retrieving banner
 * @banlen: length of banner buffer
 *
 * Access to the physical PROM chips needs to be serialized since reads and
 * writes can't occur at the same time, so we need to call into the SAL when
 * we want to look at the FIT entries on the chips.
 *
 * Returns:
 *      %SALRET_OK if ok
 *      %SALRET_INVALID_ARG if index too big
 *      %SALRET_NOT_IMPLEMENTED if running on older PROM
 *      ??? if nasid invalid OR banner buffer not large enough
 */
static inline int
ia64_sn_get_fit_compt(u64 nasid, u64 index, void *fitentry, void *banbuf,
                      u64 banlen)
{
        struct ia64_sal_retval rv;
        SAL_CALL_NOLOCK(rv, SN_SAL_GET_FIT_COMPT, nasid, index, fitentry,
                        banbuf, banlen, 0, 0);
        return (int) rv.status;
}

/*
 * Initialize the SAL components of the system controller
 * communication driver; specifically pass in a sizable buffer that
 * can be used for allocation of subchannel queues as new subchannels
 * are opened.  "buf" points to the buffer, and "len" specifies its
 * length.
 */
static inline int
ia64_sn_irtr_init(nasid_t nasid, void *buf, int len)
{
        struct ia64_sal_retval rv;
        SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_INIT,
                           (u64) nasid, (u64) buf, (u64) len, 0, 0, 0);
        return (int) rv.status;
}

/*
 * Returns the nasid, subnode & slice corresponding to a SAPIC ID
 *
 *  In:
 *      arg0 - SN_SAL_GET_SAPIC_INFO
 *      arg1 - sapicid (lid >> 16) 
 *  Out:
 *      v0 - nasid
 *      v1 - subnode
 *      v2 - slice
 */
static inline u64
ia64_sn_get_sapic_info(int sapicid, int *nasid, int *subnode, int *slice)
{
        struct ia64_sal_retval ret_stuff;

        ret_stuff.status = 0;
        ret_stuff.v0 = 0;
        ret_stuff.v1 = 0;
        ret_stuff.v2 = 0;
        SAL_CALL_NOLOCK(ret_stuff, SN_SAL_GET_SAPIC_INFO, sapicid, 0, 0, 0, 0, 0, 0);

/***** BEGIN HACK - temp til old proms no longer supported ********/
        if (ret_stuff.status == SALRET_NOT_IMPLEMENTED) {
                if (nasid) *nasid = sapicid & 0xfff;
                if (subnode) *subnode = (sapicid >> 13) & 1;
                if (slice) *slice = (sapicid >> 12) & 3;
                return 0;
        }
/***** END HACK *******/

        if (ret_stuff.status < 0)
                return ret_stuff.status;

        if (nasid) *nasid = (int) ret_stuff.v0;
        if (subnode) *subnode = (int) ret_stuff.v1;
        if (slice) *slice = (int) ret_stuff.v2;
        return 0;
}
 
/*
 * Returns information about the HUB/SHUB.
 *  In:
 *      arg0 - SN_SAL_GET_SN_INFO
 *      arg1 - 0 (other values reserved for future use)
 *  Out:
 *      v0 
 *              [7:0]   - shub type (0=shub1, 1=shub2)
 *              [15:8]  - Log2 max number of nodes in entire system (includes
 *                        C-bricks, I-bricks, etc)
 *              [23:16] - Log2 of nodes per sharing domain                       
 *              [31:24] - partition ID
 *              [39:32] - coherency_id
 *              [47:40] - regionsize
 *      v1 
 *              [15:0]  - nasid mask (ex., 0x7ff for 11 bit nasid)
 *              [23:15] - bit position of low nasid bit
 */
static inline u64
ia64_sn_get_sn_info(int fc, u8 *shubtype, u16 *nasid_bitmask, u8 *nasid_shift, 
                u8 *systemsize, u8 *sharing_domain_size, u8 *partid, u8 *coher, u8 *reg)
{
        struct ia64_sal_retval ret_stuff;

        ret_stuff.status = 0;
        ret_stuff.v0 = 0;
        ret_stuff.v1 = 0;
        ret_stuff.v2 = 0;
        SAL_CALL_NOLOCK(ret_stuff, SN_SAL_GET_SN_INFO, fc, 0, 0, 0, 0, 0, 0);

/***** BEGIN HACK - temp til old proms no longer supported ********/
        if (ret_stuff.status == SALRET_NOT_IMPLEMENTED) {
                int nasid = get_sapicid() & 0xfff;
#define SH_SHUB_ID_NODES_PER_BIT_MASK 0x001f000000000000UL
#define SH_SHUB_ID_NODES_PER_BIT_SHFT 48
                if (shubtype) *shubtype = 0;
                if (nasid_bitmask) *nasid_bitmask = 0x7ff;
                if (nasid_shift) *nasid_shift = 38;
                if (systemsize) *systemsize = 10;
                if (sharing_domain_size) *sharing_domain_size = 8;
                if (partid) *partid = ia64_sn_sysctl_partition_get(nasid);
                if (coher) *coher = nasid >> 9;
                if (reg) *reg = (HUB_L((u64 *) LOCAL_MMR_ADDR(SH1_SHUB_ID)) & SH_SHUB_ID_NODES_PER_BIT_MASK) >>
                        SH_SHUB_ID_NODES_PER_BIT_SHFT;
                return 0;
        }
/***** END HACK *******/

        if (ret_stuff.status < 0)
                return ret_stuff.status;

        if (shubtype) *shubtype = ret_stuff.v0 & 0xff;
        if (systemsize) *systemsize = (ret_stuff.v0 >> 8) & 0xff;
        if (sharing_domain_size) *sharing_domain_size = (ret_stuff.v0 >> 16) & 0xff;
        if (partid) *partid = (ret_stuff.v0 >> 24) & 0xff;
        if (coher) *coher = (ret_stuff.v0 >> 32) & 0xff;
        if (reg) *reg = (ret_stuff.v0 >> 40) & 0xff;
        if (nasid_bitmask) *nasid_bitmask = (ret_stuff.v1 & 0xffff);
        if (nasid_shift) *nasid_shift = (ret_stuff.v1 >> 16) & 0xff;
        return 0;
}
 
/*
 * This is the access point to the Altix PROM hardware performance
 * and status monitoring interface. For info on using this, see
 * include/asm-ia64/sn/sn2/sn_hwperf.h
 */
static inline int
ia64_sn_hwperf_op(nasid_t nasid, u64 opcode, u64 a0, u64 a1, u64 a2,
                  u64 a3, u64 a4, int *v0)
{
        struct ia64_sal_retval rv;
        SAL_CALL_NOLOCK(rv, SN_SAL_HWPERF_OP, (u64)nasid,
                opcode, a0, a1, a2, a3, a4);
        if (v0)
                *v0 = (int) rv.v0;
        return (int) rv.status;
}

static inline int
ia64_sn_ioif_get_pci_topology(u64 buf, u64 len)
{
        struct ia64_sal_retval rv;
        SAL_CALL_NOLOCK(rv, SN_SAL_IOIF_GET_PCI_TOPOLOGY, buf, len, 0, 0, 0, 0, 0);
        return (int) rv.status;
}

/*
 * BTE error recovery is implemented in SAL
 */
static inline int
ia64_sn_bte_recovery(nasid_t nasid)
{
        struct ia64_sal_retval rv;

        rv.status = 0;
        SAL_CALL_NOLOCK(rv, SN_SAL_BTE_RECOVER, (u64)nasid, 0, 0, 0, 0, 0, 0);
        if (rv.status == SALRET_NOT_IMPLEMENTED)
                return 0;
        return (int) rv.status;
}

static inline int
ia64_sn_is_fake_prom(void)
{
        struct ia64_sal_retval rv;
        SAL_CALL_NOLOCK(rv, SN_SAL_FAKE_PROM, 0, 0, 0, 0, 0, 0, 0);
        return (rv.status == 0);
}

static inline int
ia64_sn_get_prom_feature_set(int set, unsigned long *feature_set)
{
        struct ia64_sal_retval rv;

        SAL_CALL_NOLOCK(rv, SN_SAL_GET_PROM_FEATURE_SET, set, 0, 0, 0, 0, 0, 0);
        if (rv.status != 0)
                return rv.status;
        *feature_set = rv.v0;
        return 0;
}

static inline int
ia64_sn_set_os_feature(int feature)
{
        struct ia64_sal_retval rv;

        SAL_CALL_NOLOCK(rv, SN_SAL_SET_OS_FEATURE_SET, feature, 0, 0, 0, 0, 0, 0);
        return rv.status;
}

static inline int
sn_inject_error(u64 paddr, u64 *data, u64 *ecc)
{
        struct ia64_sal_retval ret_stuff;

        ia64_sal_oemcall_nolock(&ret_stuff, SN_SAL_INJECT_ERROR, paddr, (u64)data,
                                (u64)ecc, 0, 0, 0, 0);
        return ret_stuff.status;
}

static inline int
ia64_sn_set_cpu_number(int cpu)
{
        struct ia64_sal_retval rv;

        SAL_CALL_NOLOCK(rv, SN_SAL_SET_CPU_NUMBER, cpu, 0, 0, 0, 0, 0, 0);
        return rv.status;
}
static inline int
ia64_sn_kernel_launch_event(void)
{
        struct ia64_sal_retval rv;
        SAL_CALL_NOLOCK(rv, SN_SAL_KERNEL_LAUNCH_EVENT, 0, 0, 0, 0, 0, 0, 0);
        return rv.status;
}
#endif /* _ASM_IA64_SN_SN_SAL_H */