include/linux/usb/otg.h

   1 /* USB OTG (On The Go) defines */
   2
   3 /*
   4  * These APIs may be used between USB controllers.  USB device drivers
   5  * (for either host or peripheral roles) don't use these calls; they
   6  * continue to use just usb_device and usb_gadget.
   7  */
   8
   9
  10 /* OTG defines lots of enumeration states before device reset */
  11 enum usb_otg_state {
  12         OTG_STATE_UNDEFINED = 0,
  13
  14         /* single-role peripheral, and dual-role default-b */
  15         OTG_STATE_B_IDLE,
  16         OTG_STATE_B_SRP_INIT,
  17         OTG_STATE_B_PERIPHERAL,
  18
  19         /* extra dual-role default-b states */
  20         OTG_STATE_B_WAIT_ACON,
  21         OTG_STATE_B_HOST,
  22
  23         /* dual-role default-a */
  24         OTG_STATE_A_IDLE,
  25         OTG_STATE_A_WAIT_VRISE,
  26         OTG_STATE_A_WAIT_BCON,
  27         OTG_STATE_A_HOST,
  28         OTG_STATE_A_SUSPEND,
  29         OTG_STATE_A_PERIPHERAL,
  30         OTG_STATE_A_WAIT_VFALL,
  31         OTG_STATE_A_VBUS_ERR,
  32 };
  33
  34 /*
  35  * the otg driver needs to interact with both device side and host side
  36  * usb controllers.  it decides which controller is active at a given
  37  * moment, using the transceiver, ID signal, HNP and sometimes static
  38  * configuration information (including "board isn't wired for otg").
  39  */
  40 struct otg_transceiver {
  41         struct device           *dev;
  42         const char              *label;
  43
  44         u8                      default_a;
  45         enum usb_otg_state      state;
  46
  47         struct usb_bus          *host;
  48         struct usb_gadget       *gadget;
  49
  50         /* to pass extra port status to the root hub */
  51         u16                     port_status;
  52         u16                     port_change;
  53
  54         /* bind/unbind the host controller */
  55         int     (*set_host)(struct otg_transceiver *otg,
  56                                 struct usb_bus *host);
  57
  58         /* bind/unbind the peripheral controller */
  59         int     (*set_peripheral)(struct otg_transceiver *otg,
  60                                 struct usb_gadget *gadget);
  61
  62         /* effective for B devices, ignored for A-peripheral */
  63         int     (*set_power)(struct otg_transceiver *otg,
  64                                 unsigned mA);
  65
  66         /* for non-OTG B devices: set transceiver into suspend mode */
  67         int     (*set_suspend)(struct otg_transceiver *otg,
  68                                 int suspend);
  69
  70         /* for B devices only:  start session with A-Host */
  71         int     (*start_srp)(struct otg_transceiver *otg);
  72
  73         /* start or continue HNP role switch */
  74         int     (*start_hnp)(struct otg_transceiver *otg);
  75
  76 };
  77
  78
  79 /* for board-specific init logic */
  80 extern int otg_set_transceiver(struct otg_transceiver *);
  81
  82
  83 /* for usb host and peripheral controller drivers */
  84 extern struct otg_transceiver *otg_get_transceiver(void);
  85
  86 static inline int
  87 otg_start_hnp(struct otg_transceiver *otg)
  88 {
  89         return otg->start_hnp(otg);
  90 }
  91
  92
  93 /* for HCDs */
  94 static inline int
  95 otg_set_host(struct otg_transceiver *otg, struct usb_bus *host)
  96 {
  97         return otg->set_host(otg, host);
  98 }
  99
 100
 101 /* for usb peripheral controller drivers */
 102 static inline int
 103 otg_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *periph)
 104 {
 105         return otg->set_peripheral(otg, periph);
 106 }
 107
 108 static inline int
 109 otg_set_power(struct otg_transceiver *otg, unsigned mA)
 110 {
 111         return otg->set_power(otg, mA);
 112 }
 113
 114 static inline int
 115 otg_set_suspend(struct otg_transceiver *otg, int suspend)
 116 {
 117         if (otg->set_suspend != NULL)
 118                 return otg->set_suspend(otg, suspend);
 119         else
 120                 return 0;
 121 }
 122
 123 static inline int
 124 otg_start_srp(struct otg_transceiver *otg)
 125 {
 126         return otg->start_srp(otg);
 127 }
 128
 129
 130 /* for OTG controller drivers (and maybe other stuff) */
 131 extern int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num);