drivers/net/wireless/spectrum_cs.c

   1 /*
   2  * Driver for 802.11b cards using RAM-loadable Symbol firmware, such as
   3  * Symbol Wireless Networker LA4137, CompactFlash cards by Socket
   4  * Communications and Intel PRO/Wireless 2011B.
   5  *
   6  * The driver implements Symbol firmware download.  The rest is handled
   7  * in hermes.c and orinoco.c.
   8  *
   9  * Utilities for downloading the Symbol firmware are available at
  10  * http://sourceforge.net/projects/orinoco/
  11  *
  12  * Copyright (C) 2002-2005 Pavel Roskin <proski@gnu.org>
  13  * Portions based on orinoco_cs.c:
  14  *      Copyright (C) David Gibson, Linuxcare Australia
  15  * Portions based on Spectrum24tDnld.c from original spectrum24 driver:
  16  *      Copyright (C) Symbol Technologies.
  17  *
  18  * See copyright notice in file orinoco.c.
  19  */
  20
  21 #define DRIVER_NAME "spectrum_cs"
  22 #define PFX DRIVER_NAME ": "
  23
  24 #include <linux/module.h>
  25 #include <linux/kernel.h>
  26 #include <linux/init.h>
  27 #include <linux/delay.h>
  28 #include <linux/firmware.h>
  29 #include <pcmcia/cs_types.h>
  30 #include <pcmcia/cs.h>
  31 #include <pcmcia/cistpl.h>
  32 #include <pcmcia/cisreg.h>
  33 #include <pcmcia/ds.h>
  34
  35 #include "orinoco.h"
  36
  37 static const char primary_fw_name[] = "symbol_sp24t_prim_fw";
  38 static const char secondary_fw_name[] = "symbol_sp24t_sec_fw";
  39
  40 /********************************************************************/
  41 /* Module stuff                                                     */
  42 /********************************************************************/
  43
  44 MODULE_AUTHOR("Pavel Roskin <proski@gnu.org>");
  45 MODULE_DESCRIPTION("Driver for Symbol Spectrum24 Trilogy cards with firmware downloader");
  46 MODULE_LICENSE("Dual MPL/GPL");
  47
  48 /* Module parameters */
  49
  50 /* Some D-Link cards have buggy CIS. They do work at 5v properly, but
  51  * don't have any CIS entry for it. This workaround it... */
  52 static int ignore_cis_vcc; /* = 0 */
  53 module_param(ignore_cis_vcc, int, 0);
  54 MODULE_PARM_DESC(ignore_cis_vcc, "Allow voltage mismatch between card and socket");
  55
  56 /********************************************************************/
  57 /* Data structures                                                  */
  58 /********************************************************************/
  59
  60 /* PCMCIA specific device information (goes in the card field of
  61  * struct orinoco_private */
  62 struct orinoco_pccard {
  63         struct pcmcia_device    *p_dev;
  64         dev_node_t node;
  65 };
  66
  67 /********************************************************************/
  68 /* Function prototypes                                              */
  69 /********************************************************************/
  70
  71 static int spectrum_cs_config(struct pcmcia_device *link);
  72 static void spectrum_cs_release(struct pcmcia_device *link);
  73
  74 /********************************************************************/
  75 /* Firmware downloader                                              */
  76 /********************************************************************/
  77
  78 /* Position of PDA in the adapter memory */
  79 #define EEPROM_ADDR     0x3000
  80 #define EEPROM_LEN      0x200
  81 #define PDA_OFFSET      0x100
  82
  83 #define PDA_ADDR        (EEPROM_ADDR + PDA_OFFSET)
  84 #define PDA_WORDS       ((EEPROM_LEN - PDA_OFFSET) / 2)
  85
  86 /* Constants for the CISREG_CCSR register */
  87 #define HCR_RUN         0x07    /* run firmware after reset */
  88 #define HCR_IDLE        0x0E    /* don't run firmware after reset */
  89 #define HCR_MEM16       0x10    /* memory width bit, should be preserved */
  90
  91 /*
  92  * AUX port access.  To unlock the AUX port write the access keys to the
  93  * PARAM0-2 registers, then write HERMES_AUX_ENABLE to the HERMES_CONTROL
  94  * register.  Then read it and make sure it's HERMES_AUX_ENABLED.
  95  */
  96 #define HERMES_AUX_ENABLE       0x8000  /* Enable auxiliary port access */
  97 #define HERMES_AUX_DISABLE      0x4000  /* Disable to auxiliary port access */
  98 #define HERMES_AUX_ENABLED      0xC000  /* Auxiliary port is open */
  99
 100 #define HERMES_AUX_PW0  0xFE01
 101 #define HERMES_AUX_PW1  0xDC23
 102 #define HERMES_AUX_PW2  0xBA45
 103
 104 /* End markers */
 105 #define PDI_END         0x00000000      /* End of PDA */
 106 #define BLOCK_END       0xFFFFFFFF      /* Last image block */
 107 #define TEXT_END        0x1A            /* End of text header */
 108
 109 /*
 110  * The following structures have little-endian fields denoted by
 111  * the leading underscore.  Don't access them directly - use inline
 112  * functions defined below.
 113  */
 114
 115 /*
 116  * The binary image to be downloaded consists of series of data blocks.
 117  * Each block has the following structure.
 118  */
 119 struct dblock {
 120         __le32 addr;            /* adapter address where to write the block */
 121         __le16 len;             /* length of the data only, in bytes */
 122         char data[0];           /* data to be written */
 123 } __attribute__ ((packed));
 124
 125 /*
 126  * Plug Data References are located in in the image after the last data
 127  * block.  They refer to areas in the adapter memory where the plug data
 128  * items with matching ID should be written.
 129  */
 130 struct pdr {
 131         __le32 id;              /* record ID */
 132         __le32 addr;            /* adapter address where to write the data */
 133         __le32 len;             /* expected length of the data, in bytes */
 134         char next[0];           /* next PDR starts here */
 135 } __attribute__ ((packed));
 136
 137
 138 /*
 139  * Plug Data Items are located in the EEPROM read from the adapter by
 140  * primary firmware.  They refer to the device-specific data that should
 141  * be plugged into the secondary firmware.
 142  */
 143 struct pdi {
 144         __le16 len;             /* length of ID and data, in words */
 145         __le16 id;              /* record ID */
 146         char data[0];           /* plug data */
 147 } __attribute__ ((packed));
 148
 149
 150 /* Functions for access to little-endian data */
 151 static inline u32
 152 dblock_addr(const struct dblock *blk)
 153 {
 154         return le32_to_cpu(blk->addr);
 155 }
 156
 157 static inline u32
 158 dblock_len(const struct dblock *blk)
 159 {
 160         return le16_to_cpu(blk->len);
 161 }
 162
 163 static inline u32
 164 pdr_id(const struct pdr *pdr)
 165 {
 166         return le32_to_cpu(pdr->id);
 167 }
 168
 169 static inline u32
 170 pdr_addr(const struct pdr *pdr)
 171 {
 172         return le32_to_cpu(pdr->addr);
 173 }
 174
 175 static inline u32
 176 pdr_len(const struct pdr *pdr)
 177 {
 178         return le32_to_cpu(pdr->len);
 179 }
 180
 181 static inline u32
 182 pdi_id(const struct pdi *pdi)
 183 {
 184         return le16_to_cpu(pdi->id);
 185 }
 186
 187 /* Return length of the data only, in bytes */
 188 static inline u32
 189 pdi_len(const struct pdi *pdi)
 190 {
 191         return 2 * (le16_to_cpu(pdi->len) - 1);
 192 }
 193
 194
 195 /* Set address of the auxiliary port */
 196 static inline void
 197 spectrum_aux_setaddr(hermes_t *hw, u32 addr)
 198 {
 199         hermes_write_reg(hw, HERMES_AUXPAGE, (u16) (addr >> 7));
 200         hermes_write_reg(hw, HERMES_AUXOFFSET, (u16) (addr & 0x7F));
 201 }
 202
 203
 204 /* Open access to the auxiliary port */
 205 static int
 206 spectrum_aux_open(hermes_t *hw)
 207 {
 208         int i;
 209
 210         /* Already open? */
 211         if (hermes_read_reg(hw, HERMES_CONTROL) == HERMES_AUX_ENABLED)
 212                 return 0;
 213
 214         hermes_write_reg(hw, HERMES_PARAM0, HERMES_AUX_PW0);
 215         hermes_write_reg(hw, HERMES_PARAM1, HERMES_AUX_PW1);
 216         hermes_write_reg(hw, HERMES_PARAM2, HERMES_AUX_PW2);
 217         hermes_write_reg(hw, HERMES_CONTROL, HERMES_AUX_ENABLE);
 218
 219         for (i = 0; i < 20; i++) {
 220                 udelay(10);
 221                 if (hermes_read_reg(hw, HERMES_CONTROL) ==
 222                     HERMES_AUX_ENABLED)
 223                         return 0;
 224         }
 225
 226         return -EBUSY;
 227 }
 228
 229
 230 #define CS_CHECK(fn, ret) \
 231   do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
 232
 233 /*
 234  * Reset the card using configuration registers COR and CCSR.
 235  * If IDLE is 1, stop the firmware, so that it can be safely rewritten.
 236  */
 237 static int
 238 spectrum_reset(struct pcmcia_device *link, int idle)
 239 {
 240         int last_ret, last_fn;
 241         conf_reg_t reg;
 242         u_int save_cor;
 243
 244         /* Doing it if hardware is gone is guaranteed crash */
 245         if (!pcmcia_dev_present(link))
 246                 return -ENODEV;
 247
 248         /* Save original COR value */
 249         reg.Function = 0;
 250         reg.Action = CS_READ;
 251         reg.Offset = CISREG_COR;
 252         CS_CHECK(AccessConfigurationRegister,
 253                  pcmcia_access_configuration_register(link, &reg));
 254         save_cor = reg.Value;
 255
 256         /* Soft-Reset card */
 257         reg.Action = CS_WRITE;
 258         reg.Offset = CISREG_COR;
 259         reg.Value = (save_cor | COR_SOFT_RESET);
 260         CS_CHECK(AccessConfigurationRegister,
 261                  pcmcia_access_configuration_register(link, &reg));
 262         udelay(1000);
 263
 264         /* Read CCSR */
 265         reg.Action = CS_READ;
 266         reg.Offset = CISREG_CCSR;
 267         CS_CHECK(AccessConfigurationRegister,
 268                  pcmcia_access_configuration_register(link, &reg));
 269
 270         /*
 271          * Start or stop the firmware.  Memory width bit should be
 272          * preserved from the value we've just read.
 273          */
 274         reg.Action = CS_WRITE;
 275         reg.Offset = CISREG_CCSR;
 276         reg.Value = (idle ? HCR_IDLE : HCR_RUN) | (reg.Value & HCR_MEM16);
 277         CS_CHECK(AccessConfigurationRegister,
 278                  pcmcia_access_configuration_register(link, &reg));
 279         udelay(1000);
 280
 281         /* Restore original COR configuration index */
 282         reg.Action = CS_WRITE;
 283         reg.Offset = CISREG_COR;
 284         reg.Value = (save_cor & ~COR_SOFT_RESET);
 285         CS_CHECK(AccessConfigurationRegister,
 286                  pcmcia_access_configuration_register(link, &reg));
 287         udelay(1000);
 288         return 0;
 289
 290       cs_failed:
 291         cs_error(link, last_fn, last_ret);
 292         return -ENODEV;
 293 }
 294
 295
 296 /*
 297  * Scan PDR for the record with the specified RECORD_ID.
 298  * If it's not found, return NULL.
 299  */
 300 static struct pdr *
 301 spectrum_find_pdr(struct pdr *first_pdr, u32 record_id)
 302 {
 303         struct pdr *pdr = first_pdr;
 304
 305         while (pdr_id(pdr) != PDI_END) {
 306                 /*
 307                  * PDR area is currently not terminated by PDI_END.
 308                  * It's followed by CRC records, which have the type
 309                  * field where PDR has length.  The type can be 0 or 1.
 310                  */
 311                 if (pdr_len(pdr) < 2)
 312                         return NULL;
 313
 314                 /* If the record ID matches, we are done */
 315                 if (pdr_id(pdr) == record_id)
 316                         return pdr;
 317
 318                 pdr = (struct pdr *) pdr->next;
 319         }
 320         return NULL;
 321 }
 322
 323
 324 /* Process one Plug Data Item - find corresponding PDR and plug it */
 325 static int
 326 spectrum_plug_pdi(hermes_t *hw, struct pdr *first_pdr, struct pdi *pdi)
 327 {
 328         struct pdr *pdr;
 329
 330         /* Find the PDI corresponding to this PDR */
 331         pdr = spectrum_find_pdr(first_pdr, pdi_id(pdi));
 332
 333         /* No match is found, safe to ignore */
 334         if (!pdr)
 335                 return 0;
 336
 337         /* Lengths of the data in PDI and PDR must match */
 338         if (pdi_len(pdi) != pdr_len(pdr))
 339                 return -EINVAL;
 340
 341         /* do the actual plugging */
 342         spectrum_aux_setaddr(hw, pdr_addr(pdr));
 343         hermes_write_bytes(hw, HERMES_AUXDATA, pdi->data, pdi_len(pdi));
 344
 345         return 0;
 346 }
 347
 348
 349 /* Read PDA from the adapter */
 350 static int
 351 spectrum_read_pda(hermes_t *hw, __le16 *pda, int pda_len)
 352 {
 353         int ret;
 354         int pda_size;
 355
 356         /* Issue command to read EEPROM */
 357         ret = hermes_docmd_wait(hw, HERMES_CMD_READMIF, 0, NULL);
 358         if (ret)
 359                 return ret;
 360
 361         /* Open auxiliary port */
 362         ret = spectrum_aux_open(hw);
 363         if (ret)
 364                 return ret;
 365
 366         /* read PDA from EEPROM */
 367         spectrum_aux_setaddr(hw, PDA_ADDR);
 368         hermes_read_words(hw, HERMES_AUXDATA, pda, pda_len / 2);
 369
 370         /* Check PDA length */
 371         pda_size = le16_to_cpu(pda[0]);
 372         if (pda_size > pda_len)
 373                 return -EINVAL;
 374
 375         return 0;
 376 }
 377
 378
 379 /* Parse PDA and write the records into the adapter */
 380 static int
 381 spectrum_apply_pda(hermes_t *hw, const struct dblock *first_block,
 382                    __le16 *pda)
 383 {
 384         int ret;
 385         struct pdi *pdi;
 386         struct pdr *first_pdr;
 387         const struct dblock *blk = first_block;
 388
 389         /* Skip all blocks to locate Plug Data References */
 390         while (dblock_addr(blk) != BLOCK_END)
 391                 blk = (struct dblock *) &blk->data[dblock_len(blk)];
 392
 393         first_pdr = (struct pdr *) blk;
 394
 395         /* Go through every PDI and plug them into the adapter */
 396         pdi = (struct pdi *) (pda + 2);
 397         while (pdi_id(pdi) != PDI_END) {
 398                 ret = spectrum_plug_pdi(hw, first_pdr, pdi);
 399                 if (ret)
 400                         return ret;
 401
 402                 /* Increment to the next PDI */
 403                 pdi = (struct pdi *) &pdi->data[pdi_len(pdi)];
 404         }
 405         return 0;
 406 }
 407
 408
 409 /* Load firmware blocks into the adapter */
 410 static int
 411 spectrum_load_blocks(hermes_t *hw, const struct dblock *first_block)
 412 {
 413         const struct dblock *blk;
 414         u32 blkaddr;
 415         u32 blklen;
 416
 417         blk = first_block;
 418         blkaddr = dblock_addr(blk);
 419         blklen = dblock_len(blk);
 420
 421         while (dblock_addr(blk) != BLOCK_END) {
 422                 spectrum_aux_setaddr(hw, blkaddr);
 423                 hermes_write_bytes(hw, HERMES_AUXDATA, blk->data,
 424                                    blklen);
 425
 426                 blk = (struct dblock *) &blk->data[blklen];
 427                 blkaddr = dblock_addr(blk);
 428                 blklen = dblock_len(blk);
 429         }
 430         return 0;
 431 }
 432
 433
 434 /*
 435  * Process a firmware image - stop the card, load the firmware, reset
 436  * the card and make sure it responds.  For the secondary firmware take
 437  * care of the PDA - read it and then write it on top of the firmware.
 438  */
 439 static int
 440 spectrum_dl_image(hermes_t *hw, struct pcmcia_device *link,
 441                   const unsigned char *image, int secondary)
 442 {
 443         int ret;
 444         const unsigned char *ptr;
 445         const struct dblock *first_block;
 446
 447         /* Plug Data Area (PDA) */
 448         __le16 pda[PDA_WORDS];
 449
 450         /* Binary block begins after the 0x1A marker */
 451         ptr = image;
 452         while (*ptr++ != TEXT_END);
 453         first_block = (const struct dblock *) ptr;
 454
 455         /* Read the PDA */
 456         if (secondary) {
 457                 ret = spectrum_read_pda(hw, pda, sizeof(pda));
 458                 if (ret)
 459                         return ret;
 460         }
 461
 462         /* Stop the firmware, so that it can be safely rewritten */
 463         ret = spectrum_reset(link, 1);
 464         if (ret)
 465                 return ret;
 466
 467         /* Program the adapter with new firmware */
 468         ret = spectrum_load_blocks(hw, first_block);
 469         if (ret)
 470                 return ret;
 471
 472         /* Write the PDA to the adapter */
 473         if (secondary) {
 474                 ret = spectrum_apply_pda(hw, first_block, pda);
 475                 if (ret)
 476                         return ret;
 477         }
 478
 479         /* Run the firmware */
 480         ret = spectrum_reset(link, 0);
 481         if (ret)
 482                 return ret;
 483
 484         /* Reset hermes chip and make sure it responds */
 485         ret = hermes_init(hw);
 486
 487         /* hermes_reset() should return 0 with the secondary firmware */
 488         if (secondary && ret != 0)
 489                 return -ENODEV;
 490
 491         /* And this should work with any firmware */
 492         if (!hermes_present(hw))
 493                 return -ENODEV;
 494
 495         return 0;
 496 }
 497
 498
 499 /*
 500  * Download the firmware into the card, this also does a PCMCIA soft
 501  * reset on the card, to make sure it's in a sane state.
 502  */
 503 static int
 504 spectrum_dl_firmware(hermes_t *hw, struct pcmcia_device *link)
 505 {
 506         int ret;
 507         const struct firmware *fw_entry;
 508
 509         if (request_firmware(&fw_entry, primary_fw_name,
 510                              &handle_to_dev(link)) != 0) {
 511                 printk(KERN_ERR PFX "Cannot find firmware: %s\n",
 512                        primary_fw_name);
 513                 return -ENOENT;
 514         }
 515
 516         /* Load primary firmware */
 517         ret = spectrum_dl_image(hw, link, fw_entry->data, 0);
 518         release_firmware(fw_entry);
 519         if (ret) {
 520                 printk(KERN_ERR PFX "Primary firmware download failed\n");
 521                 return ret;
 522         }
 523
 524         if (request_firmware(&fw_entry, secondary_fw_name,
 525                              &handle_to_dev(link)) != 0) {
 526                 printk(KERN_ERR PFX "Cannot find firmware: %s\n",
 527                        secondary_fw_name);
 528                 return -ENOENT;
 529         }
 530
 531         /* Load secondary firmware */
 532         ret = spectrum_dl_image(hw, link, fw_entry->data, 1);
 533         release_firmware(fw_entry);
 534         if (ret) {
 535                 printk(KERN_ERR PFX "Secondary firmware download failed\n");
 536         }
 537
 538         return ret;
 539 }
 540
 541 /********************************************************************/
 542 /* Device methods                                                   */
 543 /********************************************************************/
 544
 545 static int
 546 spectrum_cs_hard_reset(struct orinoco_private *priv)
 547 {
 548         struct orinoco_pccard *card = priv->card;
 549         struct pcmcia_device *link = card->p_dev;
 550         int err;
 551
 552         if (!hermes_present(&priv->hw)) {
 553                 /* The firmware needs to be reloaded */
 554                 if (spectrum_dl_firmware(&priv->hw, link) != 0) {
 555                         printk(KERN_ERR PFX "Firmware download failed\n");
 556                         err = -ENODEV;
 557                 }
 558         } else {
 559                 /* Soft reset using COR and HCR */
 560                 spectrum_reset(link, 0);
 561         }
 562
 563         return 0;
 564 }
 565
 566 /********************************************************************/
 567 /* PCMCIA stuff                                                     */
 568 /********************************************************************/
 569
 570 /*
 571  * This creates an "instance" of the driver, allocating local data
 572  * structures for one device.  The device is registered with Card
 573  * Services.
 574  *
 575  * The dev_link structure is initialized, but we don't actually
 576  * configure the card at this point -- we wait until we receive a card
 577  * insertion event.  */
 578 static int
 579 spectrum_cs_probe(struct pcmcia_device *link)
 580 {
 581         struct net_device *dev;
 582         struct orinoco_private *priv;
 583         struct orinoco_pccard *card;
 584
 585         dev = alloc_orinocodev(sizeof(*card), spectrum_cs_hard_reset);
 586         if (! dev)
 587                 return -ENOMEM;
 588         priv = netdev_priv(dev);
 589         card = priv->card;
 590
 591         /* Link both structures together */
 592         card->p_dev = link;
 593         link->priv = dev;
 594
 595         /* Interrupt setup */
 596         link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
 597         link->irq.IRQInfo1 = IRQ_LEVEL_ID;
 598         link->irq.Handler = orinoco_interrupt;
 599         link->irq.Instance = dev;
 600
 601         /* General socket configuration defaults can go here.  In this
 602          * client, we assume very little, and rely on the CIS for
 603          * almost everything.  In most clients, many details (i.e.,
 604          * number, sizes, and attributes of IO windows) are fixed by
 605          * the nature of the device, and can be hard-wired here. */
 606         link->conf.Attributes = 0;
 607         link->conf.IntType = INT_MEMORY_AND_IO;
 608
 609         return spectrum_cs_config(link);
 610 }                               /* spectrum_cs_attach */
 611
 612 /*
 613  * This deletes a driver "instance".  The device is de-registered with
 614  * Card Services.  If it has been released, all local data structures
 615  * are freed.  Otherwise, the structures will be freed when the device
 616  * is released.
 617  */
 618 static void spectrum_cs_detach(struct pcmcia_device *link)
 619 {
 620         struct net_device *dev = link->priv;
 621
 622         if (link->dev_node)
 623                 unregister_netdev(dev);
 624
 625         spectrum_cs_release(link);
 626
 627         free_orinocodev(dev);
 628 }                               /* spectrum_cs_detach */
 629
 630 /*
 631  * spectrum_cs_config() is scheduled to run after a CARD_INSERTION
 632  * event is received, to configure the PCMCIA socket, and to make the
 633  * device available to the system.
 634  */
 635
 636 static int
 637 spectrum_cs_config(struct pcmcia_device *link)
 638 {
 639         struct net_device *dev = link->priv;
 640         struct orinoco_private *priv = netdev_priv(dev);
 641         struct orinoco_pccard *card = priv->card;
 642         hermes_t *hw = &priv->hw;
 643         int last_fn, last_ret;
 644         u_char buf[64];
 645         config_info_t conf;
 646         tuple_t tuple;
 647         cisparse_t parse;
 648         void __iomem *mem;
 649
 650         /* Look up the current Vcc */
 651         CS_CHECK(GetConfigurationInfo,
 652                  pcmcia_get_configuration_info(link, &conf));
 653
 654         /*
 655          * In this loop, we scan the CIS for configuration table
 656          * entries, each of which describes a valid card
 657          * configuration, including voltage, IO window, memory window,
 658          * and interrupt settings.
 659          *
 660          * We make no assumptions about the card to be configured: we
 661          * use just the information available in the CIS.  In an ideal
 662          * world, this would work for any PCMCIA card, but it requires
 663          * a complete and accurate CIS.  In practice, a driver usually
 664          * "knows" most of these things without consulting the CIS,
 665          * and most client drivers will only use the CIS to fill in
 666          * implementation-defined details.
 667          */
 668         tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
 669         tuple.Attributes = 0;
 670         tuple.TupleData = buf;
 671         tuple.TupleDataMax = sizeof(buf);
 672         tuple.TupleOffset = 0;
 673         CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
 674         while (1) {
 675                 cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
 676                 cistpl_cftable_entry_t dflt = { .index = 0 };
 677
 678                 if ( (pcmcia_get_tuple_data(link, &tuple) != 0)
 679                     || (pcmcia_parse_tuple(link, &tuple, &parse) != 0))
 680                         goto next_entry;
 681
 682                 if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
 683                         dflt = *cfg;
 684                 if (cfg->index == 0)
 685                         goto next_entry;
 686                 link->conf.ConfigIndex = cfg->index;
 687
 688                 /* Use power settings for Vcc and Vpp if present */
 689                 /* Note that the CIS values need to be rescaled */
 690                 if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
 691                         if (conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) {
 692                                 DEBUG(2, "spectrum_cs_config: Vcc mismatch (conf.Vcc = %d, CIS = %d)\n",  conf.Vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000);
 693                                 if (!ignore_cis_vcc)
 694                                         goto next_entry;
 695                         }
 696                 } else if (dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
 697                         if (conf.Vcc != dflt.vcc.param[CISTPL_POWER_VNOM] / 10000) {
 698                                 DEBUG(2, "spectrum_cs_config: Vcc mismatch (conf.Vcc = %d, CIS = %d)\n",  conf.Vcc, dflt.vcc.param[CISTPL_POWER_VNOM] / 10000);
 699                                 if(!ignore_cis_vcc)
 700                                         goto next_entry;
 701                         }
 702                 }
 703
 704                 if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
 705                         link->conf.Vpp =
 706                             cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
 707                 else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
 708                         link->conf.Vpp =
 709                             dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
 710
 711                 /* Do we need to allocate an interrupt? */
 712                 link->conf.Attributes |= CONF_ENABLE_IRQ;
 713
 714                 /* IO window settings */
 715                 link->io.NumPorts1 = link->io.NumPorts2 = 0;
 716                 if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
 717                         cistpl_io_t *io =
 718                             (cfg->io.nwin) ? &cfg->io : &dflt.io;
 719                         link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
 720                         if (!(io->flags & CISTPL_IO_8BIT))
 721                                 link->io.Attributes1 =
 722                                     IO_DATA_PATH_WIDTH_16;
 723                         if (!(io->flags & CISTPL_IO_16BIT))
 724                                 link->io.Attributes1 =
 725                                     IO_DATA_PATH_WIDTH_8;
 726                         link->io.IOAddrLines =
 727                             io->flags & CISTPL_IO_LINES_MASK;
 728                         link->io.BasePort1 = io->win[0].base;
 729                         link->io.NumPorts1 = io->win[0].len;
 730                         if (io->nwin > 1) {
 731                                 link->io.Attributes2 =
 732                                     link->io.Attributes1;
 733                                 link->io.BasePort2 = io->win[1].base;
 734                                 link->io.NumPorts2 = io->win[1].len;
 735                         }
 736
 737                         /* This reserves IO space but doesn't actually enable it */
 738                         if (pcmcia_request_io(link, &link->io) != 0)
 739                                 goto next_entry;
 740                 }
 741
 742
 743                 /* If we got this far, we're cool! */
 744
 745                 break;
 746
 747         next_entry:
 748                 pcmcia_disable_device(link);
 749                 last_ret = pcmcia_get_next_tuple(link, &tuple);
 750                 if (last_ret  == CS_NO_MORE_ITEMS) {
 751                         printk(KERN_ERR PFX "GetNextTuple(): No matching "
 752                                "CIS configuration.  Maybe you need the "
 753                                "ignore_cis_vcc=1 parameter.\n");
 754                         goto cs_failed;
 755                 }
 756         }
 757
 758         /*
 759          * Allocate an interrupt line.  Note that this does not assign
 760          * a handler to the interrupt, unless the 'Handler' member of
 761          * the irq structure is initialized.
 762          */
 763         CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
 764
 765         /* We initialize the hermes structure before completing PCMCIA
 766          * configuration just in case the interrupt handler gets
 767          * called. */
 768         mem = ioport_map(link->io.BasePort1, link->io.NumPorts1);
 769         if (!mem)
 770                 goto cs_failed;
 771
 772         hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING);
 773
 774         /*
 775          * This actually configures the PCMCIA socket -- setting up
 776          * the I/O windows and the interrupt mapping, and putting the
 777          * card and host interface into "Memory and IO" mode.
 778          */
 779         CS_CHECK(RequestConfiguration,
 780                  pcmcia_request_configuration(link, &link->conf));
 781
 782         /* Ok, we have the configuration, prepare to register the netdev */
 783         dev->base_addr = link->io.BasePort1;
 784         dev->irq = link->irq.AssignedIRQ;
 785         card->node.major = card->node.minor = 0;
 786
 787         /* Reset card and download firmware */
 788         if (spectrum_cs_hard_reset(priv) != 0) {
 789                 goto failed;
 790         }
 791
 792         SET_NETDEV_DEV(dev, &handle_to_dev(link));
 793         /* Tell the stack we exist */
 794         if (register_netdev(dev) != 0) {
 795                 printk(KERN_ERR PFX "register_netdev() failed\n");
 796                 goto failed;
 797         }
 798
 799         /* At this point, the dev_node_t structure(s) needs to be
 800          * initialized and arranged in a linked list at link->dev_node. */
 801         strcpy(card->node.dev_name, dev->name);
 802         link->dev_node = &card->node; /* link->dev_node being non-NULL is also
 803                                     used to indicate that the
 804                                     net_device has been registered */
 805
 806         /* Finally, report what we've done */
 807         printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s, irq %d, io "
 808                "0x%04x-0x%04x\n", dev->name, dev->dev.parent->bus_id,
 809                link->irq.AssignedIRQ, link->io.BasePort1,
 810                link->io.BasePort1 + link->io.NumPorts1 - 1);
 811
 812         return 0;
 813
 814  cs_failed:
 815         cs_error(link, last_fn, last_ret);
 816
 817  failed:
 818         spectrum_cs_release(link);
 819         return -ENODEV;
 820 }                               /* spectrum_cs_config */
 821
 822 /*
 823  * After a card is removed, spectrum_cs_release() will unregister the
 824  * device, and release the PCMCIA configuration.  If the device is
 825  * still open, this will be postponed until it is closed.
 826  */
 827 static void
 828 spectrum_cs_release(struct pcmcia_device *link)
 829 {
 830         struct net_device *dev = link->priv;
 831         struct orinoco_private *priv = netdev_priv(dev);
 832         unsigned long flags;
 833
 834         /* We're committed to taking the device away now, so mark the
 835          * hardware as unavailable */
 836         spin_lock_irqsave(&priv->lock, flags);
 837         priv->hw_unavailable++;
 838         spin_unlock_irqrestore(&priv->lock, flags);
 839
 840         pcmcia_disable_device(link);
 841         if (priv->hw.iobase)
 842                 ioport_unmap(priv->hw.iobase);
 843 }                               /* spectrum_cs_release */
 844
 845
 846 static int
 847 spectrum_cs_suspend(struct pcmcia_device *link)
 848 {
 849         struct net_device *dev = link->priv;
 850         struct orinoco_private *priv = netdev_priv(dev);
 851         int err = 0;
 852
 853         /* Mark the device as stopped, to block IO until later */
 854         spin_lock(&priv->lock);
 855
 856         err = __orinoco_down(dev);
 857         if (err)
 858                 printk(KERN_WARNING "%s: Error %d downing interface\n",
 859                        dev->name, err);
 860
 861         netif_device_detach(dev);
 862         priv->hw_unavailable++;
 863
 864         spin_unlock(&priv->lock);
 865
 866         return err;
 867 }
 868
 869 static int
 870 spectrum_cs_resume(struct pcmcia_device *link)
 871 {
 872         struct net_device *dev = link->priv;
 873         struct orinoco_private *priv = netdev_priv(dev);
 874
 875         netif_device_attach(dev);
 876         priv->hw_unavailable--;
 877         schedule_work(&priv->reset_work);
 878
 879         return 0;
 880 }
 881
 882
 883 /********************************************************************/
 884 /* Module initialization                                            */
 885 /********************************************************************/
 886
 887 /* Can't be declared "const" or the whole __initdata section will
 888  * become const */
 889 static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
 890         " (Pavel Roskin <proski@gnu.org>,"
 891         " David Gibson <hermes@gibson.dropbear.id.au>, et al)";
 892
 893 static struct pcmcia_device_id spectrum_cs_ids[] = {
 894         PCMCIA_DEVICE_MANF_CARD(0x026c, 0x0001), /* Symbol Spectrum24 LA4137 */
 895         PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0001), /* Socket Communications CF */
 896         PCMCIA_DEVICE_PROD_ID12("Intel", "PRO/Wireless LAN PC Card", 0x816cc815, 0x6fbf459a), /* 2011B, not 2011 */
 897         PCMCIA_DEVICE_NULL,
 898 };
 899 MODULE_DEVICE_TABLE(pcmcia, spectrum_cs_ids);
 900
 901 static struct pcmcia_driver orinoco_driver = {
 902         .owner          = THIS_MODULE,
 903         .drv            = {
 904                 .name   = DRIVER_NAME,
 905         },
 906         .probe          = spectrum_cs_probe,
 907         .remove         = spectrum_cs_detach,
 908         .suspend        = spectrum_cs_suspend,
 909         .resume         = spectrum_cs_resume,
 910         .id_table       = spectrum_cs_ids,
 911 };
 912
 913 static int __init
 914 init_spectrum_cs(void)
 915 {
 916         printk(KERN_DEBUG "%s\n", version);
 917
 918         return pcmcia_register_driver(&orinoco_driver);
 919 }
 920
 921 static void __exit
 922 exit_spectrum_cs(void)
 923 {
 924         pcmcia_unregister_driver(&orinoco_driver);
 925 }
 926
 927 module_init(init_spectrum_cs);
 928 module_exit(exit_spectrum_cs);