drivers/net/sk98lin/h/skdebug.h

   1 /******************************************************************************
   2  *
   3  * Name:        skdebug.h
   4  * Project:     Gigabit Ethernet Adapters, Common Modules
   5  * Version:     $Revision: 1.14 $
   6  * Date:        $Date: 2003/05/13 17:26:00 $
   7  * Purpose:     SK specific DEBUG support
   8  *
   9  ******************************************************************************/
  10
  11 /******************************************************************************
  12  *
  13  *      (C)Copyright 1998-2002 SysKonnect.
  14  *      (C)Copyright 2002-2003 Marvell.
  15  *
  16  *      This program is free software; you can redistribute it and/or modify
  17  *      it under the terms of the GNU General Public License as published by
  18  *      the Free Software Foundation; either version 2 of the License, or
  19  *      (at your option) any later version.
  20  *
  21  *      The information in this file is provided "AS IS" without warranty.
  22  *
  23  ******************************************************************************/
  24
  25 #ifndef __INC_SKDEBUG_H
  26 #define __INC_SKDEBUG_H
  27
  28 #ifdef  DEBUG
  29 #ifndef SK_DBG_MSG
  30 #define SK_DBG_MSG(pAC,comp,cat,arg) \
  31                 if ( ((comp) & SK_DBG_CHKMOD(pAC)) &&   \
  32                       ((cat) & SK_DBG_CHKCAT(pAC)) ) {  \
  33                         SK_DBG_PRINTF arg ;             \
  34                 }
  35 #endif
  36 #else
  37 #define SK_DBG_MSG(pAC,comp,lev,arg)
  38 #endif
  39
  40 /* PLS NOTE:
  41  * =========
  42  * Due to any restrictions of kernel printf routines do not use other
  43  * format identifiers as: %x %d %c %s .
  44  * Never use any combined format identifiers such as: %lx %ld in your
  45  * printf - argument (arg) because some OS specific kernel printfs may
  46  * only support some basic identifiers.
  47  */
  48
  49 /* Debug modules */
  50
  51 #define SK_DBGMOD_MERR  0x00000001L     /* general module error indication */
  52 #define SK_DBGMOD_HWM   0x00000002L     /* Hardware init module */
  53 #define SK_DBGMOD_RLMT  0x00000004L     /* RLMT module */
  54 #define SK_DBGMOD_VPD   0x00000008L     /* VPD module */
  55 #define SK_DBGMOD_I2C   0x00000010L     /* I2C module */
  56 #define SK_DBGMOD_PNMI  0x00000020L     /* PNMI module */
  57 #define SK_DBGMOD_CSUM  0x00000040L     /* CSUM module */
  58 #define SK_DBGMOD_ADDR  0x00000080L     /* ADDR module */
  59 #define SK_DBGMOD_PECP  0x00000100L     /* PECP module */
  60 #define SK_DBGMOD_POWM  0x00000200L     /* Power Management module */
  61
  62 /* Debug events */
  63
  64 #define SK_DBGCAT_INIT  0x00000001L     /* module/driver initialization */
  65 #define SK_DBGCAT_CTRL  0x00000002L     /* controlling devices */
  66 #define SK_DBGCAT_ERR   0x00000004L     /* error handling paths */
  67 #define SK_DBGCAT_TX    0x00000008L     /* transmit path */
  68 #define SK_DBGCAT_RX    0x00000010L     /* receive path */
  69 #define SK_DBGCAT_IRQ   0x00000020L     /* general IRQ handling */
  70 #define SK_DBGCAT_QUEUE 0x00000040L     /* any queue management */
  71 #define SK_DBGCAT_DUMP  0x00000080L     /* large data output e.g. hex dump */
  72 #define SK_DBGCAT_FATAL 0x00000100L     /* fatal error */
  73
  74 #endif  /* __INC_SKDEBUG_H */