drivers/net/sk98lin/h/skerror.h

   1 /******************************************************************************
   2  *
   3  * Name:        skerror.h
   4  * Project:     Gigabit Ethernet Adapters, Common Modules
   5  * Version:     $Revision: 1.7 $
   6  * Date:        $Date: 2003/05/13 17:25:13 $
   7  * Purpose:     SK specific Error log support
   8  *
   9  ******************************************************************************/
  10
  11 /******************************************************************************
  12  *
  13  *      (C)Copyright 1998-2002 SysKonnect.
  14  *      (C)Copyright 2002-2003 Marvell.
  15  *
  16  *      This program is free software; you can redistribute it and/or modify
  17  *      it under the terms of the GNU General Public License as published by
  18  *      the Free Software Foundation; either version 2 of the License, or
  19  *      (at your option) any later version.
  20  *
  21  *      The information in this file is provided "AS IS" without warranty.
  22  *
  23  ******************************************************************************/
  24
  25 #ifndef _INC_SKERROR_H_
  26 #define _INC_SKERROR_H_
  27
  28 /*
  29  * Define Error Classes
  30  */
  31 #define SK_ERRCL_OTHER          (0)             /* Other error */
  32 #define SK_ERRCL_CONFIG         (1L<<0) /* Configuration error */
  33 #define SK_ERRCL_INIT           (1L<<1) /* Initialization error */
  34 #define SK_ERRCL_NORES          (1L<<2) /* Out of Resources error */
  35 #define SK_ERRCL_SW                     (1L<<3) /* Internal Software error */
  36 #define SK_ERRCL_HW                     (1L<<4) /* Hardware Failure */
  37 #define SK_ERRCL_COMM           (1L<<5) /* Communication error */
  38
  39
  40 /*
  41  * Define Error Code Bases
  42  */
  43 #define SK_ERRBASE_RLMT          100    /* Base Error number for RLMT */
  44 #define SK_ERRBASE_HWINIT        200    /* Base Error number for HWInit */
  45 #define SK_ERRBASE_VPD           300    /* Base Error number for VPD */
  46 #define SK_ERRBASE_PNMI          400    /* Base Error number for PNMI */
  47 #define SK_ERRBASE_CSUM          500    /* Base Error number for Checksum */
  48 #define SK_ERRBASE_SIRQ          600    /* Base Error number for Special IRQ */
  49 #define SK_ERRBASE_I2C           700    /* Base Error number for I2C module */
  50 #define SK_ERRBASE_QUEUE         800    /* Base Error number for Scheduler */
  51 #define SK_ERRBASE_ADDR          900    /* Base Error number for Address module */
  52 #define SK_ERRBASE_PECP         1000    /* Base Error number for PECP */
  53 #define SK_ERRBASE_DRV          1100    /* Base Error number for Driver */
  54
  55 #endif  /* _INC_SKERROR_H_ */