kbuild: Fix instrumentation removal breakage on avr32
[wrt350n-kernel.git] / arch / powerpc / platforms / 83xx / mpc834x_mds.c
blob2b8a0a3f85573341749bdcc05fdb5b125d214d73
1 /*
2 * arch/powerpc/platforms/83xx/mpc834x_mds.c
4 * MPC834x MDS board specific routines
6 * Maintainer: Kumar Gala <galak@kernel.crashing.org>
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of the GNU General Public License as published by the
10 * Free Software Foundation; either version 2 of the License, or (at your
11 * option) any later version.
14 #include <linux/stddef.h>
15 #include <linux/kernel.h>
16 #include <linux/init.h>
17 #include <linux/errno.h>
18 #include <linux/reboot.h>
19 #include <linux/pci.h>
20 #include <linux/kdev_t.h>
21 #include <linux/major.h>
22 #include <linux/console.h>
23 #include <linux/delay.h>
24 #include <linux/seq_file.h>
25 #include <linux/root_dev.h>
26 #include <linux/of_platform.h>
28 #include <asm/system.h>
29 #include <asm/atomic.h>
30 #include <asm/time.h>
31 #include <asm/io.h>
32 #include <asm/machdep.h>
33 #include <asm/ipic.h>
34 #include <asm/irq.h>
35 #include <asm/prom.h>
36 #include <asm/udbg.h>
37 #include <sysdev/fsl_soc.h>
39 #include "mpc83xx.h"
41 #define BCSR5_INT_USB 0x02
42 static int mpc834xemds_usb_cfg(void)
44 struct device_node *np;
45 void __iomem *bcsr_regs = NULL;
46 u8 bcsr5;
48 mpc834x_usb_cfg();
49 /* Map BCSR area */
50 np = of_find_node_by_name(NULL, "bcsr");
51 if (np) {
52 struct resource res;
54 of_address_to_resource(np, 0, &res);
55 bcsr_regs = ioremap(res.start, res.end - res.start + 1);
56 of_node_put(np);
58 if (!bcsr_regs)
59 return -1;
62 * if Processor Board is plugged into PIB board,
63 * force to use the PHY on Processor Board
65 bcsr5 = in_8(bcsr_regs + 5);
66 if (!(bcsr5 & BCSR5_INT_USB))
67 out_8(bcsr_regs + 5, (bcsr5 | BCSR5_INT_USB));
68 iounmap(bcsr_regs);
69 return 0;
72 /* ************************************************************************
74 * Setup the architecture
77 static void __init mpc834x_mds_setup_arch(void)
79 #ifdef CONFIG_PCI
80 struct device_node *np;
81 #endif
83 if (ppc_md.progress)
84 ppc_md.progress("mpc834x_mds_setup_arch()", 0);
86 #ifdef CONFIG_PCI
87 for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
88 mpc83xx_add_bridge(np);
89 #endif
91 mpc834xemds_usb_cfg();
94 static void __init mpc834x_mds_init_IRQ(void)
96 struct device_node *np;
98 np = of_find_node_by_type(NULL, "ipic");
99 if (!np)
100 return;
102 ipic_init(np, 0);
104 /* Initialize the default interrupt mapping priorities,
105 * in case the boot rom changed something on us.
107 ipic_set_default_priority();
110 static struct of_device_id mpc834x_ids[] = {
111 { .type = "soc", },
112 { .compatible = "soc", },
116 static int __init mpc834x_declare_of_platform_devices(void)
118 of_platform_bus_probe(NULL, mpc834x_ids, NULL);
119 return 0;
121 machine_device_initcall(mpc834x_mds, mpc834x_declare_of_platform_devices);
124 * Called very early, MMU is off, device-tree isn't unflattened
126 static int __init mpc834x_mds_probe(void)
128 unsigned long root = of_get_flat_dt_root();
130 return of_flat_dt_is_compatible(root, "MPC834xMDS");
133 define_machine(mpc834x_mds) {
134 .name = "MPC834x MDS",
135 .probe = mpc834x_mds_probe,
136 .setup_arch = mpc834x_mds_setup_arch,
137 .init_IRQ = mpc834x_mds_init_IRQ,
138 .get_irq = ipic_get_irq,
139 .restart = mpc83xx_restart,
140 .time_init = mpc83xx_time_init,
141 .calibrate_decr = generic_calibrate_decr,
142 .progress = udbg_progress,