2 * sata_sil24.c - Driver for Silicon Image 3124/3132 SATA-2 controllers
4 * Copyright 2005 Tejun Heo
6 * Based on preview driver from Silicon Image.
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of the GNU General Public License as published by the
10 * Free Software Foundation; either version 2, or (at your option) any
13 * This program is distributed in the hope that it will be useful, but
14 * WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
16 * General Public License for more details.
20 #include <linux/kernel.h>
21 #include <linux/module.h>
22 #include <linux/pci.h>
23 #include <linux/blkdev.h>
24 #include <linux/delay.h>
25 #include <linux/interrupt.h>
26 #include <linux/dma-mapping.h>
27 #include <linux/device.h>
28 #include <scsi/scsi_host.h>
29 #include <scsi/scsi_cmnd.h>
30 #include <linux/libata.h>
32 #define DRV_NAME "sata_sil24"
33 #define DRV_VERSION "1.1"
36 * Port request block (PRB) 32 bytes
46 * Scatter gather entry (SGE) 16 bytes
57 struct sil24_port_multiplier
{
66 /* sil24 fetches in chunks of 64bytes. The first block
67 * contains the PRB and two SGEs. From the second block, it's
68 * consisted of four SGEs and called SGT. Calculate the
69 * number of SGTs that fit into one page.
71 SIL24_PRB_SZ
= sizeof(struct sil24_prb
)
72 + 2 * sizeof(struct sil24_sge
),
73 SIL24_MAX_SGT
= (PAGE_SIZE
- SIL24_PRB_SZ
)
74 / (4 * sizeof(struct sil24_sge
)),
76 /* This will give us one unused SGEs for ATA. This extra SGE
77 * will be used to store CDB for ATAPI devices.
79 SIL24_MAX_SGE
= 4 * SIL24_MAX_SGT
+ 1,
82 * Global controller registers (128 bytes @ BAR0)
85 HOST_SLOT_STAT
= 0x00, /* 32 bit slot stat * 4 */
89 HOST_BIST_CTRL
= 0x50,
90 HOST_BIST_PTRN
= 0x54,
91 HOST_BIST_STAT
= 0x58,
92 HOST_MEM_BIST_STAT
= 0x5c,
93 HOST_FLASH_CMD
= 0x70,
95 HOST_FLASH_DATA
= 0x74,
96 HOST_TRANSITION_DETECT
= 0x75,
97 HOST_GPIO_CTRL
= 0x76,
98 HOST_I2C_ADDR
= 0x78, /* 32 bit */
100 HOST_I2C_XFER_CNT
= 0x7e,
101 HOST_I2C_CTRL
= 0x7f,
103 /* HOST_SLOT_STAT bits */
104 HOST_SSTAT_ATTN
= (1 << 31),
107 HOST_CTRL_M66EN
= (1 << 16), /* M66EN PCI bus signal */
108 HOST_CTRL_TRDY
= (1 << 17), /* latched PCI TRDY */
109 HOST_CTRL_STOP
= (1 << 18), /* latched PCI STOP */
110 HOST_CTRL_DEVSEL
= (1 << 19), /* latched PCI DEVSEL */
111 HOST_CTRL_REQ64
= (1 << 20), /* latched PCI REQ64 */
112 HOST_CTRL_GLOBAL_RST
= (1 << 31), /* global reset */
116 * (8192 bytes @ +0x0000, +0x2000, +0x4000 and +0x6000 @ BAR2)
118 PORT_REGS_SIZE
= 0x2000,
120 PORT_LRAM
= 0x0000, /* 31 LRAM slots and PMP regs */
121 PORT_LRAM_SLOT_SZ
= 0x0080, /* 32 bytes PRB + 2 SGE, ACT... */
123 PORT_PMP
= 0x0f80, /* 8 bytes PMP * 16 (128 bytes) */
124 PORT_PMP_STATUS
= 0x0000, /* port device status offset */
125 PORT_PMP_QACTIVE
= 0x0004, /* port device QActive offset */
126 PORT_PMP_SIZE
= 0x0008, /* 8 bytes per PMP */
129 PORT_CTRL_STAT
= 0x1000, /* write: ctrl-set, read: stat */
130 PORT_CTRL_CLR
= 0x1004, /* write: ctrl-clear */
131 PORT_IRQ_STAT
= 0x1008, /* high: status, low: interrupt */
132 PORT_IRQ_ENABLE_SET
= 0x1010, /* write: enable-set */
133 PORT_IRQ_ENABLE_CLR
= 0x1014, /* write: enable-clear */
134 PORT_ACTIVATE_UPPER_ADDR
= 0x101c,
135 PORT_EXEC_FIFO
= 0x1020, /* command execution fifo */
136 PORT_CMD_ERR
= 0x1024, /* command error number */
137 PORT_FIS_CFG
= 0x1028,
138 PORT_FIFO_THRES
= 0x102c,
140 PORT_DECODE_ERR_CNT
= 0x1040,
141 PORT_DECODE_ERR_THRESH
= 0x1042,
142 PORT_CRC_ERR_CNT
= 0x1044,
143 PORT_CRC_ERR_THRESH
= 0x1046,
144 PORT_HSHK_ERR_CNT
= 0x1048,
145 PORT_HSHK_ERR_THRESH
= 0x104a,
147 PORT_PHY_CFG
= 0x1050,
148 PORT_SLOT_STAT
= 0x1800,
149 PORT_CMD_ACTIVATE
= 0x1c00, /* 64 bit cmd activate * 31 (248 bytes) */
150 PORT_CONTEXT
= 0x1e04,
151 PORT_EXEC_DIAG
= 0x1e00, /* 32bit exec diag * 16 (64 bytes, 0-10 used on 3124) */
152 PORT_PSD_DIAG
= 0x1e40, /* 32bit psd diag * 16 (64 bytes, 0-8 used on 3124) */
153 PORT_SCONTROL
= 0x1f00,
154 PORT_SSTATUS
= 0x1f04,
155 PORT_SERROR
= 0x1f08,
156 PORT_SACTIVE
= 0x1f0c,
158 /* PORT_CTRL_STAT bits */
159 PORT_CS_PORT_RST
= (1 << 0), /* port reset */
160 PORT_CS_DEV_RST
= (1 << 1), /* device reset */
161 PORT_CS_INIT
= (1 << 2), /* port initialize */
162 PORT_CS_IRQ_WOC
= (1 << 3), /* interrupt write one to clear */
163 PORT_CS_CDB16
= (1 << 5), /* 0=12b cdb, 1=16b cdb */
164 PORT_CS_PMP_RESUME
= (1 << 6), /* PMP resume */
165 PORT_CS_32BIT_ACTV
= (1 << 10), /* 32-bit activation */
166 PORT_CS_PMP_EN
= (1 << 13), /* port multiplier enable */
167 PORT_CS_RDY
= (1 << 31), /* port ready to accept commands */
169 /* PORT_IRQ_STAT/ENABLE_SET/CLR */
170 /* bits[11:0] are masked */
171 PORT_IRQ_COMPLETE
= (1 << 0), /* command(s) completed */
172 PORT_IRQ_ERROR
= (1 << 1), /* command execution error */
173 PORT_IRQ_PORTRDY_CHG
= (1 << 2), /* port ready change */
174 PORT_IRQ_PWR_CHG
= (1 << 3), /* power management change */
175 PORT_IRQ_PHYRDY_CHG
= (1 << 4), /* PHY ready change */
176 PORT_IRQ_COMWAKE
= (1 << 5), /* COMWAKE received */
177 PORT_IRQ_UNK_FIS
= (1 << 6), /* unknown FIS received */
178 PORT_IRQ_DEV_XCHG
= (1 << 7), /* device exchanged */
179 PORT_IRQ_8B10B
= (1 << 8), /* 8b/10b decode error threshold */
180 PORT_IRQ_CRC
= (1 << 9), /* CRC error threshold */
181 PORT_IRQ_HANDSHAKE
= (1 << 10), /* handshake error threshold */
182 PORT_IRQ_SDB_NOTIFY
= (1 << 11), /* SDB notify received */
184 DEF_PORT_IRQ
= PORT_IRQ_COMPLETE
| PORT_IRQ_ERROR
|
185 PORT_IRQ_PHYRDY_CHG
| PORT_IRQ_DEV_XCHG
|
186 PORT_IRQ_UNK_FIS
| PORT_IRQ_SDB_NOTIFY
,
188 /* bits[27:16] are unmasked (raw) */
189 PORT_IRQ_RAW_SHIFT
= 16,
190 PORT_IRQ_MASKED_MASK
= 0x7ff,
191 PORT_IRQ_RAW_MASK
= (0x7ff << PORT_IRQ_RAW_SHIFT
),
193 /* ENABLE_SET/CLR specific, intr steering - 2 bit field */
194 PORT_IRQ_STEER_SHIFT
= 30,
195 PORT_IRQ_STEER_MASK
= (3 << PORT_IRQ_STEER_SHIFT
),
197 /* PORT_CMD_ERR constants */
198 PORT_CERR_DEV
= 1, /* Error bit in D2H Register FIS */
199 PORT_CERR_SDB
= 2, /* Error bit in SDB FIS */
200 PORT_CERR_DATA
= 3, /* Error in data FIS not detected by dev */
201 PORT_CERR_SEND
= 4, /* Initial cmd FIS transmission failure */
202 PORT_CERR_INCONSISTENT
= 5, /* Protocol mismatch */
203 PORT_CERR_DIRECTION
= 6, /* Data direction mismatch */
204 PORT_CERR_UNDERRUN
= 7, /* Ran out of SGEs while writing */
205 PORT_CERR_OVERRUN
= 8, /* Ran out of SGEs while reading */
206 PORT_CERR_PKT_PROT
= 11, /* DIR invalid in 1st PIO setup of ATAPI */
207 PORT_CERR_SGT_BOUNDARY
= 16, /* PLD ecode 00 - SGT not on qword boundary */
208 PORT_CERR_SGT_TGTABRT
= 17, /* PLD ecode 01 - target abort */
209 PORT_CERR_SGT_MSTABRT
= 18, /* PLD ecode 10 - master abort */
210 PORT_CERR_SGT_PCIPERR
= 19, /* PLD ecode 11 - PCI parity err while fetching SGT */
211 PORT_CERR_CMD_BOUNDARY
= 24, /* ctrl[15:13] 001 - PRB not on qword boundary */
212 PORT_CERR_CMD_TGTABRT
= 25, /* ctrl[15:13] 010 - target abort */
213 PORT_CERR_CMD_MSTABRT
= 26, /* ctrl[15:13] 100 - master abort */
214 PORT_CERR_CMD_PCIPERR
= 27, /* ctrl[15:13] 110 - PCI parity err while fetching PRB */
215 PORT_CERR_XFR_UNDEF
= 32, /* PSD ecode 00 - undefined */
216 PORT_CERR_XFR_TGTABRT
= 33, /* PSD ecode 01 - target abort */
217 PORT_CERR_XFR_MSTABRT
= 34, /* PSD ecode 10 - master abort */
218 PORT_CERR_XFR_PCIPERR
= 35, /* PSD ecode 11 - PCI prity err during transfer */
219 PORT_CERR_SENDSERVICE
= 36, /* FIS received while sending service */
221 /* bits of PRB control field */
222 PRB_CTRL_PROTOCOL
= (1 << 0), /* override def. ATA protocol */
223 PRB_CTRL_PACKET_READ
= (1 << 4), /* PACKET cmd read */
224 PRB_CTRL_PACKET_WRITE
= (1 << 5), /* PACKET cmd write */
225 PRB_CTRL_NIEN
= (1 << 6), /* Mask completion irq */
226 PRB_CTRL_SRST
= (1 << 7), /* Soft reset request (ign BSY?) */
228 /* PRB protocol field */
229 PRB_PROT_PACKET
= (1 << 0),
230 PRB_PROT_TCQ
= (1 << 1),
231 PRB_PROT_NCQ
= (1 << 2),
232 PRB_PROT_READ
= (1 << 3),
233 PRB_PROT_WRITE
= (1 << 4),
234 PRB_PROT_TRANSPARENT
= (1 << 5),
239 SGE_TRM
= (1 << 31), /* Last SGE in chain */
240 SGE_LNK
= (1 << 30), /* linked list
241 Points to SGT, not SGE */
242 SGE_DRD
= (1 << 29), /* discard data read (/dev/null)
243 data address ignored */
253 SIL24_COMMON_FLAGS
= ATA_FLAG_SATA
| ATA_FLAG_NO_LEGACY
|
254 ATA_FLAG_MMIO
| ATA_FLAG_PIO_DMA
|
255 ATA_FLAG_NCQ
| ATA_FLAG_ACPI_SATA
|
256 ATA_FLAG_AN
| ATA_FLAG_PMP
,
257 SIL24_COMMON_LFLAGS
= ATA_LFLAG_SKIP_D2H_BSY
,
258 SIL24_FLAG_PCIX_IRQ_WOC
= (1 << 24), /* IRQ loss errata on PCI-X */
260 IRQ_STAT_4PORTS
= 0xf,
263 struct sil24_ata_block
{
264 struct sil24_prb prb
;
265 struct sil24_sge sge
[SIL24_MAX_SGE
];
268 struct sil24_atapi_block
{
269 struct sil24_prb prb
;
271 struct sil24_sge sge
[SIL24_MAX_SGE
];
274 union sil24_cmd_block
{
275 struct sil24_ata_block ata
;
276 struct sil24_atapi_block atapi
;
279 static struct sil24_cerr_info
{
280 unsigned int err_mask
, action
;
282 } sil24_cerr_db
[] = {
283 [0] = { AC_ERR_DEV
, 0,
285 [PORT_CERR_DEV
] = { AC_ERR_DEV
, 0,
286 "device error via D2H FIS" },
287 [PORT_CERR_SDB
] = { AC_ERR_DEV
, 0,
288 "device error via SDB FIS" },
289 [PORT_CERR_DATA
] = { AC_ERR_ATA_BUS
, ATA_EH_SOFTRESET
,
290 "error in data FIS" },
291 [PORT_CERR_SEND
] = { AC_ERR_ATA_BUS
, ATA_EH_SOFTRESET
,
292 "failed to transmit command FIS" },
293 [PORT_CERR_INCONSISTENT
] = { AC_ERR_HSM
, ATA_EH_SOFTRESET
,
294 "protocol mismatch" },
295 [PORT_CERR_DIRECTION
] = { AC_ERR_HSM
, ATA_EH_SOFTRESET
,
296 "data directon mismatch" },
297 [PORT_CERR_UNDERRUN
] = { AC_ERR_HSM
, ATA_EH_SOFTRESET
,
298 "ran out of SGEs while writing" },
299 [PORT_CERR_OVERRUN
] = { AC_ERR_HSM
, ATA_EH_SOFTRESET
,
300 "ran out of SGEs while reading" },
301 [PORT_CERR_PKT_PROT
] = { AC_ERR_HSM
, ATA_EH_SOFTRESET
,
302 "invalid data directon for ATAPI CDB" },
303 [PORT_CERR_SGT_BOUNDARY
] = { AC_ERR_SYSTEM
, ATA_EH_SOFTRESET
,
304 "SGT not on qword boundary" },
305 [PORT_CERR_SGT_TGTABRT
] = { AC_ERR_HOST_BUS
, ATA_EH_SOFTRESET
,
306 "PCI target abort while fetching SGT" },
307 [PORT_CERR_SGT_MSTABRT
] = { AC_ERR_HOST_BUS
, ATA_EH_SOFTRESET
,
308 "PCI master abort while fetching SGT" },
309 [PORT_CERR_SGT_PCIPERR
] = { AC_ERR_HOST_BUS
, ATA_EH_SOFTRESET
,
310 "PCI parity error while fetching SGT" },
311 [PORT_CERR_CMD_BOUNDARY
] = { AC_ERR_SYSTEM
, ATA_EH_SOFTRESET
,
312 "PRB not on qword boundary" },
313 [PORT_CERR_CMD_TGTABRT
] = { AC_ERR_HOST_BUS
, ATA_EH_SOFTRESET
,
314 "PCI target abort while fetching PRB" },
315 [PORT_CERR_CMD_MSTABRT
] = { AC_ERR_HOST_BUS
, ATA_EH_SOFTRESET
,
316 "PCI master abort while fetching PRB" },
317 [PORT_CERR_CMD_PCIPERR
] = { AC_ERR_HOST_BUS
, ATA_EH_SOFTRESET
,
318 "PCI parity error while fetching PRB" },
319 [PORT_CERR_XFR_UNDEF
] = { AC_ERR_HOST_BUS
, ATA_EH_SOFTRESET
,
320 "undefined error while transferring data" },
321 [PORT_CERR_XFR_TGTABRT
] = { AC_ERR_HOST_BUS
, ATA_EH_SOFTRESET
,
322 "PCI target abort while transferring data" },
323 [PORT_CERR_XFR_MSTABRT
] = { AC_ERR_HOST_BUS
, ATA_EH_SOFTRESET
,
324 "PCI master abort while transferring data" },
325 [PORT_CERR_XFR_PCIPERR
] = { AC_ERR_HOST_BUS
, ATA_EH_SOFTRESET
,
326 "PCI parity error while transferring data" },
327 [PORT_CERR_SENDSERVICE
] = { AC_ERR_HSM
, ATA_EH_SOFTRESET
,
328 "FIS received while sending service FIS" },
334 * The preview driver always returned 0 for status. We emulate it
335 * here from the previous interrupt.
337 struct sil24_port_priv
{
338 union sil24_cmd_block
*cmd_block
; /* 32 cmd blocks */
339 dma_addr_t cmd_block_dma
; /* DMA base addr for them */
340 struct ata_taskfile tf
; /* Cached taskfile registers */
344 static void sil24_dev_config(struct ata_device
*dev
);
345 static u8
sil24_check_status(struct ata_port
*ap
);
346 static int sil24_scr_read(struct ata_port
*ap
, unsigned sc_reg
, u32
*val
);
347 static int sil24_scr_write(struct ata_port
*ap
, unsigned sc_reg
, u32 val
);
348 static void sil24_tf_read(struct ata_port
*ap
, struct ata_taskfile
*tf
);
349 static int sil24_qc_defer(struct ata_queued_cmd
*qc
);
350 static void sil24_qc_prep(struct ata_queued_cmd
*qc
);
351 static unsigned int sil24_qc_issue(struct ata_queued_cmd
*qc
);
352 static void sil24_irq_clear(struct ata_port
*ap
);
353 static void sil24_pmp_attach(struct ata_port
*ap
);
354 static void sil24_pmp_detach(struct ata_port
*ap
);
355 static void sil24_freeze(struct ata_port
*ap
);
356 static void sil24_thaw(struct ata_port
*ap
);
357 static void sil24_error_handler(struct ata_port
*ap
);
358 static void sil24_post_internal_cmd(struct ata_queued_cmd
*qc
);
359 static int sil24_port_start(struct ata_port
*ap
);
360 static int sil24_init_one(struct pci_dev
*pdev
, const struct pci_device_id
*ent
);
362 static int sil24_pci_device_resume(struct pci_dev
*pdev
);
363 static int sil24_port_resume(struct ata_port
*ap
);
366 static const struct pci_device_id sil24_pci_tbl
[] = {
367 { PCI_VDEVICE(CMD
, 0x3124), BID_SIL3124
},
368 { PCI_VDEVICE(INTEL
, 0x3124), BID_SIL3124
},
369 { PCI_VDEVICE(CMD
, 0x3132), BID_SIL3132
},
370 { PCI_VDEVICE(CMD
, 0x0242), BID_SIL3132
},
371 { PCI_VDEVICE(CMD
, 0x3131), BID_SIL3131
},
372 { PCI_VDEVICE(CMD
, 0x3531), BID_SIL3131
},
374 { } /* terminate list */
377 static struct pci_driver sil24_pci_driver
= {
379 .id_table
= sil24_pci_tbl
,
380 .probe
= sil24_init_one
,
381 .remove
= ata_pci_remove_one
,
383 .suspend
= ata_pci_device_suspend
,
384 .resume
= sil24_pci_device_resume
,
388 static struct scsi_host_template sil24_sht
= {
389 .module
= THIS_MODULE
,
391 .ioctl
= ata_scsi_ioctl
,
392 .queuecommand
= ata_scsi_queuecmd
,
393 .change_queue_depth
= ata_scsi_change_queue_depth
,
394 .can_queue
= SIL24_MAX_CMDS
,
395 .this_id
= ATA_SHT_THIS_ID
,
396 .sg_tablesize
= SIL24_MAX_SGE
,
397 .cmd_per_lun
= ATA_SHT_CMD_PER_LUN
,
398 .emulated
= ATA_SHT_EMULATED
,
399 .use_clustering
= ATA_SHT_USE_CLUSTERING
,
400 .proc_name
= DRV_NAME
,
401 .dma_boundary
= ATA_DMA_BOUNDARY
,
402 .slave_configure
= ata_scsi_slave_config
,
403 .slave_destroy
= ata_scsi_slave_destroy
,
404 .bios_param
= ata_std_bios_param
,
407 static const struct ata_port_operations sil24_ops
= {
408 .dev_config
= sil24_dev_config
,
410 .check_status
= sil24_check_status
,
411 .check_altstatus
= sil24_check_status
,
412 .dev_select
= ata_noop_dev_select
,
414 .tf_read
= sil24_tf_read
,
416 .qc_defer
= sil24_qc_defer
,
417 .qc_prep
= sil24_qc_prep
,
418 .qc_issue
= sil24_qc_issue
,
420 .irq_clear
= sil24_irq_clear
,
422 .scr_read
= sil24_scr_read
,
423 .scr_write
= sil24_scr_write
,
425 .pmp_attach
= sil24_pmp_attach
,
426 .pmp_detach
= sil24_pmp_detach
,
428 .freeze
= sil24_freeze
,
430 .error_handler
= sil24_error_handler
,
431 .post_internal_cmd
= sil24_post_internal_cmd
,
433 .port_start
= sil24_port_start
,
436 .port_resume
= sil24_port_resume
,
441 * Use bits 30-31 of port_flags to encode available port numbers.
442 * Current maxium is 4.
444 #define SIL24_NPORTS2FLAG(nports) ((((unsigned)(nports) - 1) & 0x3) << 30)
445 #define SIL24_FLAG2NPORTS(flag) ((((flag) >> 30) & 0x3) + 1)
447 static const struct ata_port_info sil24_port_info
[] = {
450 .flags
= SIL24_COMMON_FLAGS
| SIL24_NPORTS2FLAG(4) |
451 SIL24_FLAG_PCIX_IRQ_WOC
,
452 .link_flags
= SIL24_COMMON_LFLAGS
,
453 .pio_mask
= 0x1f, /* pio0-4 */
454 .mwdma_mask
= 0x07, /* mwdma0-2 */
455 .udma_mask
= ATA_UDMA5
, /* udma0-5 */
456 .port_ops
= &sil24_ops
,
460 .flags
= SIL24_COMMON_FLAGS
| SIL24_NPORTS2FLAG(2),
461 .link_flags
= SIL24_COMMON_LFLAGS
,
462 .pio_mask
= 0x1f, /* pio0-4 */
463 .mwdma_mask
= 0x07, /* mwdma0-2 */
464 .udma_mask
= ATA_UDMA5
, /* udma0-5 */
465 .port_ops
= &sil24_ops
,
467 /* sil_3131/sil_3531 */
469 .flags
= SIL24_COMMON_FLAGS
| SIL24_NPORTS2FLAG(1),
470 .link_flags
= SIL24_COMMON_LFLAGS
,
471 .pio_mask
= 0x1f, /* pio0-4 */
472 .mwdma_mask
= 0x07, /* mwdma0-2 */
473 .udma_mask
= ATA_UDMA5
, /* udma0-5 */
474 .port_ops
= &sil24_ops
,
478 static int sil24_tag(int tag
)
480 if (unlikely(ata_tag_internal(tag
)))
485 static void sil24_dev_config(struct ata_device
*dev
)
487 void __iomem
*port
= dev
->link
->ap
->ioaddr
.cmd_addr
;
489 if (dev
->cdb_len
== 16)
490 writel(PORT_CS_CDB16
, port
+ PORT_CTRL_STAT
);
492 writel(PORT_CS_CDB16
, port
+ PORT_CTRL_CLR
);
495 static void sil24_read_tf(struct ata_port
*ap
, int tag
, struct ata_taskfile
*tf
)
497 void __iomem
*port
= ap
->ioaddr
.cmd_addr
;
498 struct sil24_prb __iomem
*prb
;
501 prb
= port
+ PORT_LRAM
+ sil24_tag(tag
) * PORT_LRAM_SLOT_SZ
;
502 memcpy_fromio(fis
, prb
->fis
, sizeof(fis
));
503 ata_tf_from_fis(fis
, tf
);
506 static u8
sil24_check_status(struct ata_port
*ap
)
508 struct sil24_port_priv
*pp
= ap
->private_data
;
509 return pp
->tf
.command
;
512 static int sil24_scr_map
[] = {
519 static int sil24_scr_read(struct ata_port
*ap
, unsigned sc_reg
, u32
*val
)
521 void __iomem
*scr_addr
= ap
->ioaddr
.scr_addr
;
523 if (sc_reg
< ARRAY_SIZE(sil24_scr_map
)) {
525 addr
= scr_addr
+ sil24_scr_map
[sc_reg
] * 4;
526 *val
= readl(scr_addr
+ sil24_scr_map
[sc_reg
] * 4);
532 static int sil24_scr_write(struct ata_port
*ap
, unsigned sc_reg
, u32 val
)
534 void __iomem
*scr_addr
= ap
->ioaddr
.scr_addr
;
536 if (sc_reg
< ARRAY_SIZE(sil24_scr_map
)) {
538 addr
= scr_addr
+ sil24_scr_map
[sc_reg
] * 4;
539 writel(val
, scr_addr
+ sil24_scr_map
[sc_reg
] * 4);
545 static void sil24_tf_read(struct ata_port
*ap
, struct ata_taskfile
*tf
)
547 struct sil24_port_priv
*pp
= ap
->private_data
;
551 static void sil24_config_port(struct ata_port
*ap
)
553 void __iomem
*port
= ap
->ioaddr
.cmd_addr
;
555 /* configure IRQ WoC */
556 if (ap
->flags
& SIL24_FLAG_PCIX_IRQ_WOC
)
557 writel(PORT_CS_IRQ_WOC
, port
+ PORT_CTRL_STAT
);
559 writel(PORT_CS_IRQ_WOC
, port
+ PORT_CTRL_CLR
);
561 /* zero error counters. */
562 writel(0x8000, port
+ PORT_DECODE_ERR_THRESH
);
563 writel(0x8000, port
+ PORT_CRC_ERR_THRESH
);
564 writel(0x8000, port
+ PORT_HSHK_ERR_THRESH
);
565 writel(0x0000, port
+ PORT_DECODE_ERR_CNT
);
566 writel(0x0000, port
+ PORT_CRC_ERR_CNT
);
567 writel(0x0000, port
+ PORT_HSHK_ERR_CNT
);
569 /* always use 64bit activation */
570 writel(PORT_CS_32BIT_ACTV
, port
+ PORT_CTRL_CLR
);
572 /* clear port multiplier enable and resume bits */
573 writel(PORT_CS_PMP_EN
| PORT_CS_PMP_RESUME
, port
+ PORT_CTRL_CLR
);
576 static void sil24_config_pmp(struct ata_port
*ap
, int attached
)
578 void __iomem
*port
= ap
->ioaddr
.cmd_addr
;
581 writel(PORT_CS_PMP_EN
, port
+ PORT_CTRL_STAT
);
583 writel(PORT_CS_PMP_EN
, port
+ PORT_CTRL_CLR
);
586 static void sil24_clear_pmp(struct ata_port
*ap
)
588 void __iomem
*port
= ap
->ioaddr
.cmd_addr
;
591 writel(PORT_CS_PMP_RESUME
, port
+ PORT_CTRL_CLR
);
593 for (i
= 0; i
< SATA_PMP_MAX_PORTS
; i
++) {
594 void __iomem
*pmp_base
= port
+ PORT_PMP
+ i
* PORT_PMP_SIZE
;
596 writel(0, pmp_base
+ PORT_PMP_STATUS
);
597 writel(0, pmp_base
+ PORT_PMP_QACTIVE
);
601 static int sil24_init_port(struct ata_port
*ap
)
603 void __iomem
*port
= ap
->ioaddr
.cmd_addr
;
604 struct sil24_port_priv
*pp
= ap
->private_data
;
607 /* clear PMP error status */
608 if (ap
->nr_pmp_links
)
611 writel(PORT_CS_INIT
, port
+ PORT_CTRL_STAT
);
612 ata_wait_register(port
+ PORT_CTRL_STAT
,
613 PORT_CS_INIT
, PORT_CS_INIT
, 10, 100);
614 tmp
= ata_wait_register(port
+ PORT_CTRL_STAT
,
615 PORT_CS_RDY
, 0, 10, 100);
617 if ((tmp
& (PORT_CS_INIT
| PORT_CS_RDY
)) != PORT_CS_RDY
) {
619 ap
->link
.eh_context
.i
.action
|= ATA_EH_HARDRESET
;
626 static int sil24_exec_polled_cmd(struct ata_port
*ap
, int pmp
,
627 const struct ata_taskfile
*tf
,
628 int is_cmd
, u32 ctrl
,
629 unsigned long timeout_msec
)
631 void __iomem
*port
= ap
->ioaddr
.cmd_addr
;
632 struct sil24_port_priv
*pp
= ap
->private_data
;
633 struct sil24_prb
*prb
= &pp
->cmd_block
[0].ata
.prb
;
634 dma_addr_t paddr
= pp
->cmd_block_dma
;
635 u32 irq_enabled
, irq_mask
, irq_stat
;
638 prb
->ctrl
= cpu_to_le16(ctrl
);
639 ata_tf_to_fis(tf
, pmp
, is_cmd
, prb
->fis
);
641 /* temporarily plug completion and error interrupts */
642 irq_enabled
= readl(port
+ PORT_IRQ_ENABLE_SET
);
643 writel(PORT_IRQ_COMPLETE
| PORT_IRQ_ERROR
, port
+ PORT_IRQ_ENABLE_CLR
);
645 writel((u32
)paddr
, port
+ PORT_CMD_ACTIVATE
);
646 writel((u64
)paddr
>> 32, port
+ PORT_CMD_ACTIVATE
+ 4);
648 irq_mask
= (PORT_IRQ_COMPLETE
| PORT_IRQ_ERROR
) << PORT_IRQ_RAW_SHIFT
;
649 irq_stat
= ata_wait_register(port
+ PORT_IRQ_STAT
, irq_mask
, 0x0,
652 writel(irq_mask
, port
+ PORT_IRQ_STAT
); /* clear IRQs */
653 irq_stat
>>= PORT_IRQ_RAW_SHIFT
;
655 if (irq_stat
& PORT_IRQ_COMPLETE
)
658 /* force port into known state */
661 if (irq_stat
& PORT_IRQ_ERROR
)
667 /* restore IRQ enabled */
668 writel(irq_enabled
, port
+ PORT_IRQ_ENABLE_SET
);
673 static int sil24_do_softreset(struct ata_link
*link
, unsigned int *class,
674 int pmp
, unsigned long deadline
)
676 struct ata_port
*ap
= link
->ap
;
677 unsigned long timeout_msec
= 0;
678 struct ata_taskfile tf
;
684 if (ata_link_offline(link
)) {
685 DPRINTK("PHY reports no device\n");
686 *class = ATA_DEV_NONE
;
690 /* put the port into known state */
691 if (sil24_init_port(ap
)) {
692 reason
= "port not ready";
697 if (time_after(deadline
, jiffies
))
698 timeout_msec
= jiffies_to_msecs(deadline
- jiffies
);
700 ata_tf_init(link
->device
, &tf
); /* doesn't really matter */
701 rc
= sil24_exec_polled_cmd(ap
, pmp
, &tf
, 0, PRB_CTRL_SRST
,
707 reason
= "SRST command error";
711 sil24_read_tf(ap
, 0, &tf
);
712 *class = ata_dev_classify(&tf
);
714 if (*class == ATA_DEV_UNKNOWN
)
715 *class = ATA_DEV_NONE
;
718 DPRINTK("EXIT, class=%u\n", *class);
722 ata_link_printk(link
, KERN_ERR
, "softreset failed (%s)\n", reason
);
726 static int sil24_softreset(struct ata_link
*link
, unsigned int *class,
727 unsigned long deadline
)
729 return sil24_do_softreset(link
, class, SATA_PMP_CTRL_PORT
, deadline
);
732 static int sil24_hardreset(struct ata_link
*link
, unsigned int *class,
733 unsigned long deadline
)
735 struct ata_port
*ap
= link
->ap
;
736 void __iomem
*port
= ap
->ioaddr
.cmd_addr
;
737 struct sil24_port_priv
*pp
= ap
->private_data
;
738 int did_port_rst
= 0;
744 /* Sometimes, DEV_RST is not enough to recover the controller.
745 * This happens often after PM DMA CS errata.
747 if (pp
->do_port_rst
) {
748 ata_port_printk(ap
, KERN_WARNING
, "controller in dubious "
749 "state, performing PORT_RST\n");
751 writel(PORT_CS_PORT_RST
, port
+ PORT_CTRL_STAT
);
753 writel(PORT_CS_PORT_RST
, port
+ PORT_CTRL_CLR
);
754 ata_wait_register(port
+ PORT_CTRL_STAT
, PORT_CS_RDY
, 0,
757 /* restore port configuration */
758 sil24_config_port(ap
);
759 sil24_config_pmp(ap
, ap
->nr_pmp_links
);
765 /* sil24 does the right thing(tm) without any protection */
769 if (ata_link_online(link
))
772 writel(PORT_CS_DEV_RST
, port
+ PORT_CTRL_STAT
);
773 tmp
= ata_wait_register(port
+ PORT_CTRL_STAT
,
774 PORT_CS_DEV_RST
, PORT_CS_DEV_RST
, 10,
777 /* SStatus oscillates between zero and valid status after
778 * DEV_RST, debounce it.
780 rc
= sata_link_debounce(link
, sata_deb_timing_long
, deadline
);
782 reason
= "PHY debouncing failed";
786 if (tmp
& PORT_CS_DEV_RST
) {
787 if (ata_link_offline(link
))
789 reason
= "link not ready";
793 /* Sil24 doesn't store signature FIS after hardreset, so we
794 * can't wait for BSY to clear. Some devices take a long time
795 * to get ready and those devices will choke if we don't wait
796 * for BSY clearance here. Tell libata to perform follow-up
807 ata_link_printk(link
, KERN_ERR
, "hardreset failed (%s)\n", reason
);
811 static inline void sil24_fill_sg(struct ata_queued_cmd
*qc
,
812 struct sil24_sge
*sge
)
814 struct scatterlist
*sg
;
815 struct sil24_sge
*last_sge
= NULL
;
818 for_each_sg(qc
->sg
, sg
, qc
->n_elem
, si
) {
819 sge
->addr
= cpu_to_le64(sg_dma_address(sg
));
820 sge
->cnt
= cpu_to_le32(sg_dma_len(sg
));
827 last_sge
->flags
= cpu_to_le32(SGE_TRM
);
830 static int sil24_qc_defer(struct ata_queued_cmd
*qc
)
832 struct ata_link
*link
= qc
->dev
->link
;
833 struct ata_port
*ap
= link
->ap
;
834 u8 prot
= qc
->tf
.protocol
;
837 * There is a bug in the chip:
838 * Port LRAM Causes the PRB/SGT Data to be Corrupted
839 * If the host issues a read request for LRAM and SActive registers
840 * while active commands are available in the port, PRB/SGT data in
841 * the LRAM can become corrupted. This issue applies only when
842 * reading from, but not writing to, the LRAM.
844 * Therefore, reading LRAM when there is no particular error [and
845 * other commands may be outstanding] is prohibited.
847 * To avoid this bug there are two situations where a command must run
848 * exclusive of any other commands on the port:
850 * - ATAPI commands which check the sense data
851 * - Passthrough ATA commands which always have ATA_QCFLAG_RESULT_TF
855 int is_excl
= (ata_is_atapi(prot
) ||
856 (qc
->flags
& ATA_QCFLAG_RESULT_TF
));
858 if (unlikely(ap
->excl_link
)) {
859 if (link
== ap
->excl_link
) {
860 if (ap
->nr_active_links
)
861 return ATA_DEFER_PORT
;
862 qc
->flags
|= ATA_QCFLAG_CLEAR_EXCL
;
864 return ATA_DEFER_PORT
;
865 } else if (unlikely(is_excl
)) {
866 ap
->excl_link
= link
;
867 if (ap
->nr_active_links
)
868 return ATA_DEFER_PORT
;
869 qc
->flags
|= ATA_QCFLAG_CLEAR_EXCL
;
872 return ata_std_qc_defer(qc
);
875 static void sil24_qc_prep(struct ata_queued_cmd
*qc
)
877 struct ata_port
*ap
= qc
->ap
;
878 struct sil24_port_priv
*pp
= ap
->private_data
;
879 union sil24_cmd_block
*cb
;
880 struct sil24_prb
*prb
;
881 struct sil24_sge
*sge
;
884 cb
= &pp
->cmd_block
[sil24_tag(qc
->tag
)];
886 if (!ata_is_atapi(qc
->tf
.protocol
)) {
890 prb
= &cb
->atapi
.prb
;
892 memset(cb
->atapi
.cdb
, 0, 32);
893 memcpy(cb
->atapi
.cdb
, qc
->cdb
, qc
->dev
->cdb_len
);
895 if (ata_is_data(qc
->tf
.protocol
)) {
896 if (qc
->tf
.flags
& ATA_TFLAG_WRITE
)
897 ctrl
= PRB_CTRL_PACKET_WRITE
;
899 ctrl
= PRB_CTRL_PACKET_READ
;
903 prb
->ctrl
= cpu_to_le16(ctrl
);
904 ata_tf_to_fis(&qc
->tf
, qc
->dev
->link
->pmp
, 1, prb
->fis
);
906 if (qc
->flags
& ATA_QCFLAG_DMAMAP
)
907 sil24_fill_sg(qc
, sge
);
910 static unsigned int sil24_qc_issue(struct ata_queued_cmd
*qc
)
912 struct ata_port
*ap
= qc
->ap
;
913 struct sil24_port_priv
*pp
= ap
->private_data
;
914 void __iomem
*port
= ap
->ioaddr
.cmd_addr
;
915 unsigned int tag
= sil24_tag(qc
->tag
);
917 void __iomem
*activate
;
919 paddr
= pp
->cmd_block_dma
+ tag
* sizeof(*pp
->cmd_block
);
920 activate
= port
+ PORT_CMD_ACTIVATE
+ tag
* 8;
922 writel((u32
)paddr
, activate
);
923 writel((u64
)paddr
>> 32, activate
+ 4);
928 static void sil24_irq_clear(struct ata_port
*ap
)
933 static void sil24_pmp_attach(struct ata_port
*ap
)
935 sil24_config_pmp(ap
, 1);
939 static void sil24_pmp_detach(struct ata_port
*ap
)
942 sil24_config_pmp(ap
, 0);
945 static int sil24_pmp_softreset(struct ata_link
*link
, unsigned int *class,
946 unsigned long deadline
)
948 return sil24_do_softreset(link
, class, link
->pmp
, deadline
);
951 static int sil24_pmp_hardreset(struct ata_link
*link
, unsigned int *class,
952 unsigned long deadline
)
956 rc
= sil24_init_port(link
->ap
);
958 ata_link_printk(link
, KERN_ERR
,
959 "hardreset failed (port not ready)\n");
963 return sata_pmp_std_hardreset(link
, class, deadline
);
966 static void sil24_freeze(struct ata_port
*ap
)
968 void __iomem
*port
= ap
->ioaddr
.cmd_addr
;
970 /* Port-wide IRQ mask in HOST_CTRL doesn't really work, clear
971 * PORT_IRQ_ENABLE instead.
973 writel(0xffff, port
+ PORT_IRQ_ENABLE_CLR
);
976 static void sil24_thaw(struct ata_port
*ap
)
978 void __iomem
*port
= ap
->ioaddr
.cmd_addr
;
982 tmp
= readl(port
+ PORT_IRQ_STAT
);
983 writel(tmp
, port
+ PORT_IRQ_STAT
);
985 /* turn IRQ back on */
986 writel(DEF_PORT_IRQ
, port
+ PORT_IRQ_ENABLE_SET
);
989 static void sil24_error_intr(struct ata_port
*ap
)
991 void __iomem
*port
= ap
->ioaddr
.cmd_addr
;
992 struct sil24_port_priv
*pp
= ap
->private_data
;
993 struct ata_queued_cmd
*qc
= NULL
;
994 struct ata_link
*link
;
995 struct ata_eh_info
*ehi
;
996 int abort
= 0, freeze
= 0;
999 /* on error, we need to clear IRQ explicitly */
1000 irq_stat
= readl(port
+ PORT_IRQ_STAT
);
1001 writel(irq_stat
, port
+ PORT_IRQ_STAT
);
1003 /* first, analyze and record host port events */
1005 ehi
= &link
->eh_info
;
1006 ata_ehi_clear_desc(ehi
);
1008 ata_ehi_push_desc(ehi
, "irq_stat 0x%08x", irq_stat
);
1010 if (irq_stat
& PORT_IRQ_SDB_NOTIFY
) {
1011 ata_ehi_push_desc(ehi
, "SDB notify");
1012 sata_async_notification(ap
);
1015 if (irq_stat
& (PORT_IRQ_PHYRDY_CHG
| PORT_IRQ_DEV_XCHG
)) {
1016 ata_ehi_hotplugged(ehi
);
1017 ata_ehi_push_desc(ehi
, "%s",
1018 irq_stat
& PORT_IRQ_PHYRDY_CHG
?
1019 "PHY RDY changed" : "device exchanged");
1023 if (irq_stat
& PORT_IRQ_UNK_FIS
) {
1024 ehi
->err_mask
|= AC_ERR_HSM
;
1025 ehi
->action
|= ATA_EH_SOFTRESET
;
1026 ata_ehi_push_desc(ehi
, "unknown FIS");
1030 /* deal with command error */
1031 if (irq_stat
& PORT_IRQ_ERROR
) {
1032 struct sil24_cerr_info
*ci
= NULL
;
1033 unsigned int err_mask
= 0, action
= 0;
1039 /* DMA Context Switch Failure in Port Multiplier Mode
1040 * errata. If we have active commands to 3 or more
1041 * devices, any error condition on active devices can
1042 * corrupt DMA context switching.
1044 if (ap
->nr_active_links
>= 3) {
1045 ehi
->err_mask
|= AC_ERR_OTHER
;
1046 ehi
->action
|= ATA_EH_HARDRESET
;
1047 ata_ehi_push_desc(ehi
, "PMP DMA CS errata");
1048 pp
->do_port_rst
= 1;
1052 /* find out the offending link and qc */
1053 if (ap
->nr_pmp_links
) {
1054 context
= readl(port
+ PORT_CONTEXT
);
1055 pmp
= (context
>> 5) & 0xf;
1057 if (pmp
< ap
->nr_pmp_links
) {
1058 link
= &ap
->pmp_link
[pmp
];
1059 ehi
= &link
->eh_info
;
1060 qc
= ata_qc_from_tag(ap
, link
->active_tag
);
1062 ata_ehi_clear_desc(ehi
);
1063 ata_ehi_push_desc(ehi
, "irq_stat 0x%08x",
1066 err_mask
|= AC_ERR_HSM
;
1067 action
|= ATA_EH_HARDRESET
;
1071 qc
= ata_qc_from_tag(ap
, link
->active_tag
);
1073 /* analyze CMD_ERR */
1074 cerr
= readl(port
+ PORT_CMD_ERR
);
1075 if (cerr
< ARRAY_SIZE(sil24_cerr_db
))
1076 ci
= &sil24_cerr_db
[cerr
];
1078 if (ci
&& ci
->desc
) {
1079 err_mask
|= ci
->err_mask
;
1080 action
|= ci
->action
;
1081 if (action
& ATA_EH_RESET_MASK
)
1083 ata_ehi_push_desc(ehi
, "%s", ci
->desc
);
1085 err_mask
|= AC_ERR_OTHER
;
1086 action
|= ATA_EH_SOFTRESET
;
1088 ata_ehi_push_desc(ehi
, "unknown command error %d",
1092 /* record error info */
1094 sil24_read_tf(ap
, qc
->tag
, &pp
->tf
);
1095 qc
->err_mask
|= err_mask
;
1097 ehi
->err_mask
|= err_mask
;
1099 ehi
->action
|= action
;
1101 /* if PMP, resume */
1102 if (ap
->nr_pmp_links
)
1103 writel(PORT_CS_PMP_RESUME
, port
+ PORT_CTRL_STAT
);
1106 /* freeze or abort */
1108 ata_port_freeze(ap
);
1111 ata_link_abort(qc
->dev
->link
);
1117 static void sil24_finish_qc(struct ata_queued_cmd
*qc
)
1119 struct ata_port
*ap
= qc
->ap
;
1120 struct sil24_port_priv
*pp
= ap
->private_data
;
1122 if (qc
->flags
& ATA_QCFLAG_RESULT_TF
)
1123 sil24_read_tf(ap
, qc
->tag
, &pp
->tf
);
1126 static inline void sil24_host_intr(struct ata_port
*ap
)
1128 void __iomem
*port
= ap
->ioaddr
.cmd_addr
;
1129 u32 slot_stat
, qc_active
;
1132 /* If PCIX_IRQ_WOC, there's an inherent race window between
1133 * clearing IRQ pending status and reading PORT_SLOT_STAT
1134 * which may cause spurious interrupts afterwards. This is
1135 * unavoidable and much better than losing interrupts which
1136 * happens if IRQ pending is cleared after reading
1139 if (ap
->flags
& SIL24_FLAG_PCIX_IRQ_WOC
)
1140 writel(PORT_IRQ_COMPLETE
, port
+ PORT_IRQ_STAT
);
1142 slot_stat
= readl(port
+ PORT_SLOT_STAT
);
1144 if (unlikely(slot_stat
& HOST_SSTAT_ATTN
)) {
1145 sil24_error_intr(ap
);
1149 qc_active
= slot_stat
& ~HOST_SSTAT_ATTN
;
1150 rc
= ata_qc_complete_multiple(ap
, qc_active
, sil24_finish_qc
);
1154 struct ata_eh_info
*ehi
= &ap
->link
.eh_info
;
1155 ehi
->err_mask
|= AC_ERR_HSM
;
1156 ehi
->action
|= ATA_EH_SOFTRESET
;
1157 ata_port_freeze(ap
);
1161 /* spurious interrupts are expected if PCIX_IRQ_WOC */
1162 if (!(ap
->flags
& SIL24_FLAG_PCIX_IRQ_WOC
) && ata_ratelimit())
1163 ata_port_printk(ap
, KERN_INFO
, "spurious interrupt "
1164 "(slot_stat 0x%x active_tag %d sactive 0x%x)\n",
1165 slot_stat
, ap
->link
.active_tag
, ap
->link
.sactive
);
1168 static irqreturn_t
sil24_interrupt(int irq
, void *dev_instance
)
1170 struct ata_host
*host
= dev_instance
;
1171 void __iomem
*host_base
= host
->iomap
[SIL24_HOST_BAR
];
1172 unsigned handled
= 0;
1176 status
= readl(host_base
+ HOST_IRQ_STAT
);
1178 if (status
== 0xffffffff) {
1179 printk(KERN_ERR DRV_NAME
": IRQ status == 0xffffffff, "
1180 "PCI fault or device removal?\n");
1184 if (!(status
& IRQ_STAT_4PORTS
))
1187 spin_lock(&host
->lock
);
1189 for (i
= 0; i
< host
->n_ports
; i
++)
1190 if (status
& (1 << i
)) {
1191 struct ata_port
*ap
= host
->ports
[i
];
1192 if (ap
&& !(ap
->flags
& ATA_FLAG_DISABLED
)) {
1193 sil24_host_intr(ap
);
1196 printk(KERN_ERR DRV_NAME
1197 ": interrupt from disabled port %d\n", i
);
1200 spin_unlock(&host
->lock
);
1202 return IRQ_RETVAL(handled
);
1205 static void sil24_error_handler(struct ata_port
*ap
)
1207 struct sil24_port_priv
*pp
= ap
->private_data
;
1209 if (sil24_init_port(ap
))
1210 ata_eh_freeze_port(ap
);
1212 /* perform recovery */
1213 sata_pmp_do_eh(ap
, ata_std_prereset
, sil24_softreset
, sil24_hardreset
,
1214 ata_std_postreset
, sata_pmp_std_prereset
,
1215 sil24_pmp_softreset
, sil24_pmp_hardreset
,
1216 sata_pmp_std_postreset
);
1218 pp
->do_port_rst
= 0;
1221 static void sil24_post_internal_cmd(struct ata_queued_cmd
*qc
)
1223 struct ata_port
*ap
= qc
->ap
;
1225 /* make DMA engine forget about the failed command */
1226 if ((qc
->flags
& ATA_QCFLAG_FAILED
) && sil24_init_port(ap
))
1227 ata_eh_freeze_port(ap
);
1230 static int sil24_port_start(struct ata_port
*ap
)
1232 struct device
*dev
= ap
->host
->dev
;
1233 struct sil24_port_priv
*pp
;
1234 union sil24_cmd_block
*cb
;
1235 size_t cb_size
= sizeof(*cb
) * SIL24_MAX_CMDS
;
1239 pp
= devm_kzalloc(dev
, sizeof(*pp
), GFP_KERNEL
);
1243 pp
->tf
.command
= ATA_DRDY
;
1245 cb
= dmam_alloc_coherent(dev
, cb_size
, &cb_dma
, GFP_KERNEL
);
1248 memset(cb
, 0, cb_size
);
1250 rc
= ata_pad_alloc(ap
, dev
);
1255 pp
->cmd_block_dma
= cb_dma
;
1257 ap
->private_data
= pp
;
1262 static void sil24_init_controller(struct ata_host
*host
)
1264 void __iomem
*host_base
= host
->iomap
[SIL24_HOST_BAR
];
1269 writel(0, host_base
+ HOST_FLASH_CMD
);
1271 /* clear global reset & mask interrupts during initialization */
1272 writel(0, host_base
+ HOST_CTRL
);
1275 for (i
= 0; i
< host
->n_ports
; i
++) {
1276 struct ata_port
*ap
= host
->ports
[i
];
1277 void __iomem
*port
= ap
->ioaddr
.cmd_addr
;
1279 /* Initial PHY setting */
1280 writel(0x20c, port
+ PORT_PHY_CFG
);
1282 /* Clear port RST */
1283 tmp
= readl(port
+ PORT_CTRL_STAT
);
1284 if (tmp
& PORT_CS_PORT_RST
) {
1285 writel(PORT_CS_PORT_RST
, port
+ PORT_CTRL_CLR
);
1286 tmp
= ata_wait_register(port
+ PORT_CTRL_STAT
,
1288 PORT_CS_PORT_RST
, 10, 100);
1289 if (tmp
& PORT_CS_PORT_RST
)
1290 dev_printk(KERN_ERR
, host
->dev
,
1291 "failed to clear port RST\n");
1294 /* configure port */
1295 sil24_config_port(ap
);
1298 /* Turn on interrupts */
1299 writel(IRQ_STAT_4PORTS
, host_base
+ HOST_CTRL
);
1302 static int sil24_init_one(struct pci_dev
*pdev
, const struct pci_device_id
*ent
)
1304 extern int __MARKER__sil24_cmd_block_is_sized_wrongly
;
1305 static int printed_version
;
1306 struct ata_port_info pi
= sil24_port_info
[ent
->driver_data
];
1307 const struct ata_port_info
*ppi
[] = { &pi
, NULL
};
1308 void __iomem
* const *iomap
;
1309 struct ata_host
*host
;
1313 /* cause link error if sil24_cmd_block is sized wrongly */
1314 if (sizeof(union sil24_cmd_block
) != PAGE_SIZE
)
1315 __MARKER__sil24_cmd_block_is_sized_wrongly
= 1;
1317 if (!printed_version
++)
1318 dev_printk(KERN_DEBUG
, &pdev
->dev
, "version " DRV_VERSION
"\n");
1320 /* acquire resources */
1321 rc
= pcim_enable_device(pdev
);
1325 rc
= pcim_iomap_regions(pdev
,
1326 (1 << SIL24_HOST_BAR
) | (1 << SIL24_PORT_BAR
),
1330 iomap
= pcim_iomap_table(pdev
);
1332 /* apply workaround for completion IRQ loss on PCI-X errata */
1333 if (pi
.flags
& SIL24_FLAG_PCIX_IRQ_WOC
) {
1334 tmp
= readl(iomap
[SIL24_HOST_BAR
] + HOST_CTRL
);
1335 if (tmp
& (HOST_CTRL_TRDY
| HOST_CTRL_STOP
| HOST_CTRL_DEVSEL
))
1336 dev_printk(KERN_INFO
, &pdev
->dev
,
1337 "Applying completion IRQ loss on PCI-X "
1340 pi
.flags
&= ~SIL24_FLAG_PCIX_IRQ_WOC
;
1343 /* allocate and fill host */
1344 host
= ata_host_alloc_pinfo(&pdev
->dev
, ppi
,
1345 SIL24_FLAG2NPORTS(ppi
[0]->flags
));
1348 host
->iomap
= iomap
;
1350 for (i
= 0; i
< host
->n_ports
; i
++) {
1351 struct ata_port
*ap
= host
->ports
[i
];
1352 size_t offset
= ap
->port_no
* PORT_REGS_SIZE
;
1353 void __iomem
*port
= iomap
[SIL24_PORT_BAR
] + offset
;
1355 host
->ports
[i
]->ioaddr
.cmd_addr
= port
;
1356 host
->ports
[i
]->ioaddr
.scr_addr
= port
+ PORT_SCONTROL
;
1358 ata_port_pbar_desc(ap
, SIL24_HOST_BAR
, -1, "host");
1359 ata_port_pbar_desc(ap
, SIL24_PORT_BAR
, offset
, "port");
1362 /* configure and activate the device */
1363 if (!pci_set_dma_mask(pdev
, DMA_64BIT_MASK
)) {
1364 rc
= pci_set_consistent_dma_mask(pdev
, DMA_64BIT_MASK
);
1366 rc
= pci_set_consistent_dma_mask(pdev
, DMA_32BIT_MASK
);
1368 dev_printk(KERN_ERR
, &pdev
->dev
,
1369 "64-bit DMA enable failed\n");
1374 rc
= pci_set_dma_mask(pdev
, DMA_32BIT_MASK
);
1376 dev_printk(KERN_ERR
, &pdev
->dev
,
1377 "32-bit DMA enable failed\n");
1380 rc
= pci_set_consistent_dma_mask(pdev
, DMA_32BIT_MASK
);
1382 dev_printk(KERN_ERR
, &pdev
->dev
,
1383 "32-bit consistent DMA enable failed\n");
1388 sil24_init_controller(host
);
1390 pci_set_master(pdev
);
1391 return ata_host_activate(host
, pdev
->irq
, sil24_interrupt
, IRQF_SHARED
,
1396 static int sil24_pci_device_resume(struct pci_dev
*pdev
)
1398 struct ata_host
*host
= dev_get_drvdata(&pdev
->dev
);
1399 void __iomem
*host_base
= host
->iomap
[SIL24_HOST_BAR
];
1402 rc
= ata_pci_device_do_resume(pdev
);
1406 if (pdev
->dev
.power
.power_state
.event
== PM_EVENT_SUSPEND
)
1407 writel(HOST_CTRL_GLOBAL_RST
, host_base
+ HOST_CTRL
);
1409 sil24_init_controller(host
);
1411 ata_host_resume(host
);
1416 static int sil24_port_resume(struct ata_port
*ap
)
1418 sil24_config_pmp(ap
, ap
->nr_pmp_links
);
1423 static int __init
sil24_init(void)
1425 return pci_register_driver(&sil24_pci_driver
);
1428 static void __exit
sil24_exit(void)
1430 pci_unregister_driver(&sil24_pci_driver
);
1433 MODULE_AUTHOR("Tejun Heo");
1434 MODULE_DESCRIPTION("Silicon Image 3124/3132 SATA low-level driver");
1435 MODULE_LICENSE("GPL");
1436 MODULE_DEVICE_TABLE(pci
, sil24_pci_tbl
);
1438 module_init(sil24_init
);
1439 module_exit(sil24_exit
);