?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
x86: disable BTS ptrace extensions for now
[wrt350n-kernel.git] / drivers / char / isicom.c
blob85d596a3c18c35b7248b4ee98fcaba65c60abcf0
1 /*
2 * This program is free software; you can redistribute it and/or
3 * modify it under the terms of the GNU General Public License
4 * as published by the Free Software Foundation; either version
5 * 2 of the License, or (at your option) any later version.
6 *
7 * Original driver code supplied by Multi-Tech
8 *
9 * Changes
10 * 1/9/98 alan@redhat.com Merge to 2.0.x kernel tree
11 * Obtain and use official major/minors
12 * Loader switched to a misc device
13 * (fixed range check bug as a side effect)
14 * Printk clean up
15 * 9/12/98 alan@redhat.com Rough port to 2.1.x
16 *
17 * 10/6/99 sameer Merged the ISA and PCI drivers to
18 * a new unified driver.
19 *
20 * 3/9/99 sameer Added support for ISI4616 cards.
21 *
22 * 16/9/99 sameer We do not force RTS low anymore.
23 * This is to prevent the firmware
24 * from getting confused.
25 *
26 * 26/10/99 sameer Cosmetic changes:The driver now
27 * dumps the Port Count information
28 * along with I/O address and IRQ.
29 *
30 * 13/12/99 sameer Fixed the problem with IRQ sharing.
31 *
32 * 10/5/00 sameer Fixed isicom_shutdown_board()
33 * to not lower DTR on all the ports
34 * when the last port on the card is
35 * closed.
36 *
37 * 10/5/00 sameer Signal mask setup command added
38 * to isicom_setup_port and
39 * isicom_shutdown_port.
40 *
41 * 24/5/00 sameer The driver is now SMP aware.
42 *
43 *
44 * 27/11/00 Vinayak P Risbud Fixed the Driver Crash Problem
45 *
46 *
47 * 03/01/01 anil .s Added support for resetting the
48 * internal modems on ISI cards.
49 *
50 * 08/02/01 anil .s Upgraded the driver for kernel
51 * 2.4.x
52 *
53 * 11/04/01 Kevin Fixed firmware load problem with
54 * ISIHP-4X card
55 *
56 * 30/04/01 anil .s Fixed the remote login through
57 * ISI port problem. Now the link
58 * does not go down before password
59 * prompt.
60 *
61 * 03/05/01 anil .s Fixed the problem with IRQ sharing
62 * among ISI-PCI cards.
63 *
64 * 03/05/01 anil .s Added support to display the version
65 * info during insmod as well as module
66 * listing by lsmod.
67 *
68 * 10/05/01 anil .s Done the modifications to the source
69 * file and Install script so that the
70 * same installation can be used for
71 * 2.2.x and 2.4.x kernel.
72 *
73 * 06/06/01 anil .s Now we drop both dtr and rts during
74 * shutdown_port as well as raise them
75 * during isicom_config_port.
76 *
77 * 09/06/01 acme@conectiva.com.br use capable, not suser, do
78 * restore_flags on failure in
79 * isicom_send_break, verify put_user
80 * result
81 *
82 * 11/02/03 ranjeeth Added support for 230 Kbps and 460 Kbps
83 * Baud index extended to 21
84 *
85 * 20/03/03 ranjeeth Made to work for Linux Advanced server.
86 * Taken care of license warning.
87 *
88 * 10/12/03 Ravindra Made to work for Fedora Core 1 of
89 * Red Hat Distribution
90 *
91 * 06/01/05 Alan Cox Merged the ISI and base kernel strands
92 * into a single 2.6 driver
93 *
94 * ***********************************************************
95 *
96 * To use this driver you also need the support package. You
97 * can find this in RPM format on
98 * ftp://ftp.linux.org.uk/pub/linux/alan
99 *
100 * You can find the original tools for this direct from Multitech
101 * ftp://ftp.multitech.com/ISI-Cards/
102 *
103 * Having installed the cards the module options (/etc/modprobe.conf)
104 *
105 * options isicom io=card1,card2,card3,card4 irq=card1,card2,card3,card4
106 *
107 * Omit those entries for boards you don't have installed.
108 *
109 * TODO
110 * Merge testing
111 * 64-bit verification
112 */
113
114 #include <linux/module.h>
115 #include <linux/firmware.h>
116 #include <linux/kernel.h>
117 #include <linux/tty.h>
118 #include <linux/tty_flip.h>
119 #include <linux/termios.h>
120 #include <linux/fs.h>
121 #include <linux/sched.h>
122 #include <linux/serial.h>
123 #include <linux/mm.h>
124 #include <linux/interrupt.h>
125 #include <linux/timer.h>
126 #include <linux/delay.h>
127 #include <linux/ioport.h>
128
129 #include <asm/uaccess.h>
130 #include <asm/io.h>
131 #include <asm/system.h>
132
133 #include <linux/pci.h>
134
135 #include <linux/isicom.h>
136
137 #define InterruptTheCard(base) outw(0, (base) + 0xc)
138 #define ClearInterrupt(base) inw((base) + 0x0a)
139
140 #define pr_dbg(str...) pr_debug("ISICOM: " str)
141 #ifdef DEBUG
142 #define isicom_paranoia_check(a, b, c) __isicom_paranoia_check((a), (b), (c))
143 #else
144 #define isicom_paranoia_check(a, b, c) 0
145 #endif
146
147 static int isicom_probe(struct pci_dev *, const struct pci_device_id *);
148 static void __devexit isicom_remove(struct pci_dev *);
149
150 static struct pci_device_id isicom_pci_tbl[] = {
151 { PCI_DEVICE(VENDOR_ID, 0x2028) },
152 { PCI_DEVICE(VENDOR_ID, 0x2051) },
153 { PCI_DEVICE(VENDOR_ID, 0x2052) },
154 { PCI_DEVICE(VENDOR_ID, 0x2053) },
155 { PCI_DEVICE(VENDOR_ID, 0x2054) },
156 { PCI_DEVICE(VENDOR_ID, 0x2055) },
157 { PCI_DEVICE(VENDOR_ID, 0x2056) },
158 { PCI_DEVICE(VENDOR_ID, 0x2057) },
159 { PCI_DEVICE(VENDOR_ID, 0x2058) },
160 { 0 }
161 };
162 MODULE_DEVICE_TABLE(pci, isicom_pci_tbl);
163
164 static struct pci_driver isicom_driver = {
165 .name = "isicom",
166 .id_table = isicom_pci_tbl,
167 .probe = isicom_probe,
168 .remove = __devexit_p(isicom_remove)
169 };
170
171 static int prev_card = 3; /* start servicing isi_card[0] */
172 static struct tty_driver *isicom_normal;
173
174 static void isicom_tx(unsigned long _data);
175 static void isicom_start(struct tty_struct *tty);
176
177 static DEFINE_TIMER(tx, isicom_tx, 0, 0);
178
179 /* baud index mappings from linux defns to isi */
180
181 static signed char linuxb_to_isib[] = {
182 -1, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 13, 15, 16, 17, 18, 19, 20, 21
183 };
184
185 struct isi_board {
186 unsigned long base;
187 int irq;
188 unsigned char port_count;
189 unsigned short status;
190 unsigned short port_status; /* each bit for each port */
191 unsigned short shift_count;
192 struct isi_port * ports;
193 signed char count;
194 spinlock_t card_lock; /* Card wide lock 11/5/00 -sameer */
195 unsigned long flags;
196 unsigned int index;
197 };
198
199 struct isi_port {
200 unsigned short magic;
201 unsigned int flags;
202 int count;
203 int blocked_open;
204 int close_delay;
205 u16 channel;
206 u16 status;
207 u16 closing_wait;
208 struct isi_board * card;
209 struct tty_struct * tty;
210 wait_queue_head_t close_wait;
211 wait_queue_head_t open_wait;
212 unsigned char * xmit_buf;
213 int xmit_head;
214 int xmit_tail;
215 int xmit_cnt;
216 };
217
218 static struct isi_board isi_card[BOARD_COUNT];
219 static struct isi_port isi_ports[PORT_COUNT];
220
221 /*
222 * Locking functions for card level locking. We need to own both
223 * the kernel lock for the card and have the card in a position that
224 * it wants to talk.
225 */
226
227 static inline int WaitTillCardIsFree(unsigned long base)
228 {
229 unsigned int count = 0;
230 unsigned int a = in_atomic(); /* do we run under spinlock? */
231
232 while (!(inw(base + 0xe) & 0x1) && count++ < 100)
233 if (a)
234 mdelay(1);
235 else
236 msleep(1);
237
238 return !(inw(base + 0xe) & 0x1);
239 }
240
241 static int lock_card(struct isi_board *card)
242 {
243 unsigned long base = card->base;
244 unsigned int retries, a;
245
246 for (retries = 0; retries < 10; retries++) {
247 spin_lock_irqsave(&card->card_lock, card->flags);
248 for (a = 0; a < 10; a++) {
249 if (inw(base + 0xe) & 0x1)
250 return 1;
251 udelay(10);
252 }
253 spin_unlock_irqrestore(&card->card_lock, card->flags);
254 msleep(10);
255 }
256 printk(KERN_WARNING "ISICOM: Failed to lock Card (0x%lx)\n",
257 card->base);
258
259 return 0; /* Failed to acquire the card! */
260 }
261
262 static void unlock_card(struct isi_board *card)
263 {
264 spin_unlock_irqrestore(&card->card_lock, card->flags);
265 }
266
267 /*
268 * ISI Card specific ops ...
269 */
270
271 /* card->lock HAS to be held */
272 static void raise_dtr(struct isi_port *port)
273 {
274 struct isi_board *card = port->card;
275 unsigned long base = card->base;
276 u16 channel = port->channel;
277
278 if (WaitTillCardIsFree(base))
279 return;
280
281 outw(0x8000 | (channel << card->shift_count) | 0x02, base);
282 outw(0x0504, base);
283 InterruptTheCard(base);
284 port->status |= ISI_DTR;
285 }
286
287 /* card->lock HAS to be held */
288 static inline void drop_dtr(struct isi_port *port)
289 {
290 struct isi_board *card = port->card;
291 unsigned long base = card->base;
292 u16 channel = port->channel;
293
294 if (WaitTillCardIsFree(base))
295 return;
296
297 outw(0x8000 | (channel << card->shift_count) | 0x02, base);
298 outw(0x0404, base);
299 InterruptTheCard(base);
300 port->status &= ~ISI_DTR;
301 }
302
303 /* card->lock HAS to be held */
304 static inline void raise_rts(struct isi_port *port)
305 {
306 struct isi_board *card = port->card;
307 unsigned long base = card->base;
308 u16 channel = port->channel;
309
310 if (WaitTillCardIsFree(base))
311 return;
312
313 outw(0x8000 | (channel << card->shift_count) | 0x02, base);
314 outw(0x0a04, base);
315 InterruptTheCard(base);
316 port->status |= ISI_RTS;
317 }
318
319 /* card->lock HAS to be held */
320 static inline void drop_rts(struct isi_port *port)
321 {
322 struct isi_board *card = port->card;
323 unsigned long base = card->base;
324 u16 channel = port->channel;
325
326 if (WaitTillCardIsFree(base))
327 return;
328
329 outw(0x8000 | (channel << card->shift_count) | 0x02, base);
330 outw(0x0804, base);
331 InterruptTheCard(base);
332 port->status &= ~ISI_RTS;
333 }
334
335 /* card->lock MUST NOT be held */
336 static inline void raise_dtr_rts(struct isi_port *port)
337 {
338 struct isi_board *card = port->card;
339 unsigned long base = card->base;
340 u16 channel = port->channel;
341
342 if (!lock_card(card))
343 return;
344
345 outw(0x8000 | (channel << card->shift_count) | 0x02, base);
346 outw(0x0f04, base);
347 InterruptTheCard(base);
348 port->status |= (ISI_DTR | ISI_RTS);
349 unlock_card(card);
350 }
351
352 /* card->lock HAS to be held */
353 static void drop_dtr_rts(struct isi_port *port)
354 {
355 struct isi_board *card = port->card;
356 unsigned long base = card->base;
357 u16 channel = port->channel;
358
359 if (WaitTillCardIsFree(base))
360 return;
361
362 outw(0x8000 | (channel << card->shift_count) | 0x02, base);
363 outw(0x0c04, base);
364 InterruptTheCard(base);
365 port->status &= ~(ISI_RTS | ISI_DTR);
366 }
367
368 /*
369 * ISICOM Driver specific routines ...
370 *
371 */
372
373 static inline int __isicom_paranoia_check(struct isi_port const *port,
374 char *name, const char *routine)
375 {
376 if (!port) {
377 printk(KERN_WARNING "ISICOM: Warning: bad isicom magic for "
378 "dev %s in %s.\n", name, routine);
379 return 1;
380 }
381 if (port->magic != ISICOM_MAGIC) {
382 printk(KERN_WARNING "ISICOM: Warning: NULL isicom port for "
383 "dev %s in %s.\n", name, routine);
384 return 1;
385 }
386
387 return 0;
388 }
389
390 /*
391 * Transmitter.
392 *
393 * We shovel data into the card buffers on a regular basis. The card
394 * will do the rest of the work for us.
395 */
396
397 static void isicom_tx(unsigned long _data)
398 {
399 unsigned long flags, base;
400 unsigned int retries;
401 short count = (BOARD_COUNT-1), card;
402 short txcount, wrd, residue, word_count, cnt;
403 struct isi_port *port;
404 struct tty_struct *tty;
405
406 /* find next active board */
407 card = (prev_card + 1) & 0x0003;
408 while(count-- > 0) {
409 if (isi_card[card].status & BOARD_ACTIVE)
410 break;
411 card = (card + 1) & 0x0003;
412 }
413 if (!(isi_card[card].status & BOARD_ACTIVE))
414 goto sched_again;
415
416 prev_card = card;
417
418 count = isi_card[card].port_count;
419 port = isi_card[card].ports;
420 base = isi_card[card].base;
421
422 spin_lock_irqsave(&isi_card[card].card_lock, flags);
423 for (retries = 0; retries < 100; retries++) {
424 if (inw(base + 0xe) & 0x1)
425 break;
426 udelay(2);
427 }
428 if (retries >= 100)
429 goto unlock;
430
431 for (;count > 0;count--, port++) {
432 /* port not active or tx disabled to force flow control */
433 if (!(port->flags & ASYNC_INITIALIZED) ||
434 !(port->status & ISI_TXOK))
435 continue;
436
437 tty = port->tty;
438
439 if (tty == NULL)
440 continue;
441
442 txcount = min_t(short, TX_SIZE, port->xmit_cnt);
443 if (txcount <= 0 || tty->stopped || tty->hw_stopped)
444 continue;
445
446 if (!(inw(base + 0x02) & (1 << port->channel)))
447 continue;
448
449 pr_dbg("txing %d bytes, port%d.\n", txcount,
450 port->channel + 1);
451 outw((port->channel << isi_card[card].shift_count) | txcount,
452 base);
453 residue = NO;
454 wrd = 0;
455 while (1) {
456 cnt = min_t(int, txcount, (SERIAL_XMIT_SIZE
457 - port->xmit_tail));
458 if (residue == YES) {
459 residue = NO;
460 if (cnt > 0) {
461 wrd |= (port->xmit_buf[port->xmit_tail]
462 << 8);
463 port->xmit_tail = (port->xmit_tail + 1)
464 & (SERIAL_XMIT_SIZE - 1);
465 port->xmit_cnt--;
466 txcount--;
467 cnt--;
468 outw(wrd, base);
469 } else {
470 outw(wrd, base);
471 break;
472 }
473 }
474 if (cnt <= 0) break;
475 word_count = cnt >> 1;
476 outsw(base, port->xmit_buf+port->xmit_tail,word_count);
477 port->xmit_tail = (port->xmit_tail
478 + (word_count << 1)) & (SERIAL_XMIT_SIZE - 1);
479 txcount -= (word_count << 1);
480 port->xmit_cnt -= (word_count << 1);
481 if (cnt & 0x0001) {
482 residue = YES;
483 wrd = port->xmit_buf[port->xmit_tail];
484 port->xmit_tail = (port->xmit_tail + 1)
485 & (SERIAL_XMIT_SIZE - 1);
486 port->xmit_cnt--;
487 txcount--;
488 }
489 }
490
491 InterruptTheCard(base);
492 if (port->xmit_cnt <= 0)
493 port->status &= ~ISI_TXOK;
494 if (port->xmit_cnt <= WAKEUP_CHARS)
495 tty_wakeup(tty);
496 }
497
498 unlock:
499 spin_unlock_irqrestore(&isi_card[card].card_lock, flags);
500 /* schedule another tx for hopefully in about 10ms */
501 sched_again:
502 mod_timer(&tx, jiffies + msecs_to_jiffies(10));
503 }
504
505 /*
506 * Main interrupt handler routine
507 */
508
509 static irqreturn_t isicom_interrupt(int irq, void *dev_id)
510 {
511 struct isi_board *card = dev_id;
512 struct isi_port *port;
513 struct tty_struct *tty;
514 unsigned long base;
515 u16 header, word_count, count, channel;
516 short byte_count;
517 unsigned char *rp;
518
519 if (!card || !(card->status & FIRMWARE_LOADED))
520 return IRQ_NONE;
521
522 base = card->base;
523
524 /* did the card interrupt us? */
525 if (!(inw(base + 0x0e) & 0x02))
526 return IRQ_NONE;
527
528 spin_lock(&card->card_lock);
529
530 /*
531 * disable any interrupts from the PCI card and lower the
532 * interrupt line
533 */
534 outw(0x8000, base+0x04);
535 ClearInterrupt(base);
536
537 inw(base); /* get the dummy word out */
538 header = inw(base);
539 channel = (header & 0x7800) >> card->shift_count;
540 byte_count = header & 0xff;
541
542 if (channel + 1 > card->port_count) {
543 printk(KERN_WARNING "ISICOM: isicom_interrupt(0x%lx): "
544 "%d(channel) > port_count.\n", base, channel+1);
545 outw(0x0000, base+0x04); /* enable interrupts */
546 spin_unlock(&card->card_lock);
547 return IRQ_HANDLED;
548 }
549 port = card->ports + channel;
550 if (!(port->flags & ASYNC_INITIALIZED)) {
551 outw(0x0000, base+0x04); /* enable interrupts */
552 spin_unlock(&card->card_lock);
553 return IRQ_HANDLED;
554 }
555
556 tty = port->tty;
557 if (tty == NULL) {
558 word_count = byte_count >> 1;
559 while(byte_count > 1) {
560 inw(base);
561 byte_count -= 2;
562 }
563 if (byte_count & 0x01)
564 inw(base);
565 outw(0x0000, base+0x04); /* enable interrupts */
566 spin_unlock(&card->card_lock);
567 return IRQ_HANDLED;
568 }
569
570 if (header & 0x8000) { /* Status Packet */
571 header = inw(base);
572 switch(header & 0xff) {
573 case 0: /* Change in EIA signals */
574 if (port->flags & ASYNC_CHECK_CD) {
575 if (port->status & ISI_DCD) {
576 if (!(header & ISI_DCD)) {
577 /* Carrier has been lost */
578 pr_dbg("interrupt: DCD->low.\n"
579 );
580 port->status &= ~ISI_DCD;
581 tty_hangup(tty);
582 }
583 } else if (header & ISI_DCD) {
584 /* Carrier has been detected */
585 pr_dbg("interrupt: DCD->high.\n");
586 port->status |= ISI_DCD;
587 wake_up_interruptible(&port->open_wait);
588 }
589 } else {
590 if (header & ISI_DCD)
591 port->status |= ISI_DCD;
592 else
593 port->status &= ~ISI_DCD;
594 }
595
596 if (port->flags & ASYNC_CTS_FLOW) {
597 if (port->tty->hw_stopped) {
598 if (header & ISI_CTS) {
599 port->tty->hw_stopped = 0;
600 /* start tx ing */
601 port->status |= (ISI_TXOK
602 | ISI_CTS);
603 tty_wakeup(tty);
604 }
605 } else if (!(header & ISI_CTS)) {
606 port->tty->hw_stopped = 1;
607 /* stop tx ing */
608 port->status &= ~(ISI_TXOK | ISI_CTS);
609 }
610 } else {
611 if (header & ISI_CTS)
612 port->status |= ISI_CTS;
613 else
614 port->status &= ~ISI_CTS;
615 }
616
617 if (header & ISI_DSR)
618 port->status |= ISI_DSR;
619 else
620 port->status &= ~ISI_DSR;
621
622 if (header & ISI_RI)
623 port->status |= ISI_RI;
624 else
625 port->status &= ~ISI_RI;
626
627 break;
628
629 case 1: /* Received Break !!! */
630 tty_insert_flip_char(tty, 0, TTY_BREAK);
631 if (port->flags & ASYNC_SAK)
632 do_SAK(tty);
633 tty_flip_buffer_push(tty);
634 break;
635
636 case 2: /* Statistics */
637 pr_dbg("isicom_interrupt: stats!!!.\n");
638 break;
639
640 default:
641 pr_dbg("Intr: Unknown code in status packet.\n");
642 break;
643 }
644 } else { /* Data Packet */
645
646 count = tty_prepare_flip_string(tty, &rp, byte_count & ~1);
647 pr_dbg("Intr: Can rx %d of %d bytes.\n", count, byte_count);
648 word_count = count >> 1;
649 insw(base, rp, word_count);
650 byte_count -= (word_count << 1);
651 if (count & 0x0001) {
652 tty_insert_flip_char(tty, inw(base) & 0xff,
653 TTY_NORMAL);
654 byte_count -= 2;
655 }
656 if (byte_count > 0) {
657 pr_dbg("Intr(0x%lx:%d): Flip buffer overflow! dropping "
658 "bytes...\n", base, channel + 1);
659 while(byte_count > 0) { /* drain out unread xtra data */
660 inw(base);
661 byte_count -= 2;
662 }
663 }
664 tty_flip_buffer_push(tty);
665 }
666 outw(0x0000, base+0x04); /* enable interrupts */
667 spin_unlock(&card->card_lock);
668
669 return IRQ_HANDLED;
670 }
671
672 static void isicom_config_port(struct isi_port *port)
673 {
674 struct isi_board *card = port->card;
675 struct tty_struct *tty;
676 unsigned long baud;
677 unsigned long base = card->base;
678 u16 channel_setup, channel = port->channel,
679 shift_count = card->shift_count;
680 unsigned char flow_ctrl;
681
682 if (!(tty = port->tty) || !tty->termios)
683 return;
684 baud = C_BAUD(tty);
685 if (baud & CBAUDEX) {
686 baud &= ~CBAUDEX;
687
688 /* if CBAUDEX bit is on and the baud is set to either 50 or 75
689 * then the card is programmed for 57.6Kbps or 115Kbps
690 * respectively.
691 */
692
693 /* 1,2,3,4 => 57.6, 115.2, 230, 460 kbps resp. */
694 if (baud < 1 || baud > 4)
695 port->tty->termios->c_cflag &= ~CBAUDEX;
696 else
697 baud += 15;
698 }
699 if (baud == 15) {
700
701 /* the ASYNC_SPD_HI and ASYNC_SPD_VHI options are set
702 * by the set_serial_info ioctl ... this is done by
703 * the 'setserial' utility.
704 */
705
706 if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
707 baud++; /* 57.6 Kbps */
708 if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
709 baud +=2; /* 115 Kbps */
710 if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
711 baud += 3; /* 230 kbps*/
712 if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
713 baud += 4; /* 460 kbps*/
714 }
715 if (linuxb_to_isib[baud] == -1) {
716 /* hang up */
717 drop_dtr(port);
718 return;
719 }
720 else
721 raise_dtr(port);
722
723 if (WaitTillCardIsFree(base) == 0) {
724 outw(0x8000 | (channel << shift_count) |0x03, base);
725 outw(linuxb_to_isib[baud] << 8 | 0x03, base);
726 channel_setup = 0;
727 switch(C_CSIZE(tty)) {
728 case CS5:
729 channel_setup |= ISICOM_CS5;
730 break;
731 case CS6:
732 channel_setup |= ISICOM_CS6;
733 break;
734 case CS7:
735 channel_setup |= ISICOM_CS7;
736 break;
737 case CS8:
738 channel_setup |= ISICOM_CS8;
739 break;
740 }
741
742 if (C_CSTOPB(tty))
743 channel_setup |= ISICOM_2SB;
744 if (C_PARENB(tty)) {
745 channel_setup |= ISICOM_EVPAR;
746 if (C_PARODD(tty))
747 channel_setup |= ISICOM_ODPAR;
748 }
749 outw(channel_setup, base);
750 InterruptTheCard(base);
751 }
752 if (C_CLOCAL(tty))
753 port->flags &= ~ASYNC_CHECK_CD;
754 else
755 port->flags |= ASYNC_CHECK_CD;
756
757 /* flow control settings ...*/
758 flow_ctrl = 0;
759 port->flags &= ~ASYNC_CTS_FLOW;
760 if (C_CRTSCTS(tty)) {
761 port->flags |= ASYNC_CTS_FLOW;
762 flow_ctrl |= ISICOM_CTSRTS;
763 }
764 if (I_IXON(tty))
765 flow_ctrl |= ISICOM_RESPOND_XONXOFF;
766 if (I_IXOFF(tty))
767 flow_ctrl |= ISICOM_INITIATE_XONXOFF;
768
769 if (WaitTillCardIsFree(base) == 0) {
770 outw(0x8000 | (channel << shift_count) |0x04, base);
771 outw(flow_ctrl << 8 | 0x05, base);
772 outw((STOP_CHAR(tty)) << 8 | (START_CHAR(tty)), base);
773 InterruptTheCard(base);
774 }
775
776 /* rx enabled -> enable port for rx on the card */
777 if (C_CREAD(tty)) {
778 card->port_status |= (1 << channel);
779 outw(card->port_status, base + 0x02);
780 }
781 }
782
783 /* open et all */
784
785 static inline void isicom_setup_board(struct isi_board *bp)
786 {
787 int channel;
788 struct isi_port *port;
789 unsigned long flags;
790
791 spin_lock_irqsave(&bp->card_lock, flags);
792 if (bp->status & BOARD_ACTIVE) {
793 spin_unlock_irqrestore(&bp->card_lock, flags);
794 return;
795 }
796 port = bp->ports;
797 bp->status |= BOARD_ACTIVE;
798 for (channel = 0; channel < bp->port_count; channel++, port++)
799 drop_dtr_rts(port);
800 spin_unlock_irqrestore(&bp->card_lock, flags);
801 }
802
803 static int isicom_setup_port(struct isi_port *port)
804 {
805 struct isi_board *card = port->card;
806 unsigned long flags;
807
808 if (port->flags & ASYNC_INITIALIZED) {
809 return 0;
810 }
811 if (!port->xmit_buf) {
812 unsigned long page;
813
814 if (!(page = get_zeroed_page(GFP_KERNEL)))
815 return -ENOMEM;
816
817 if (port->xmit_buf) {
818 free_page(page);
819 return -ERESTARTSYS;
820 }
821 port->xmit_buf = (unsigned char *) page;
822 }
823
824 spin_lock_irqsave(&card->card_lock, flags);
825 if (port->tty)
826 clear_bit(TTY_IO_ERROR, &port->tty->flags);
827 if (port->count == 1)
828 card->count++;
829
830 port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
831
832 /* discard any residual data */
833 if (WaitTillCardIsFree(card->base) == 0) {
834 outw(0x8000 | (port->channel << card->shift_count) | 0x02,
835 card->base);
836 outw(((ISICOM_KILLTX | ISICOM_KILLRX) << 8) | 0x06, card->base);
837 InterruptTheCard(card->base);
838 }
839
840 isicom_config_port(port);
841 port->flags |= ASYNC_INITIALIZED;
842 spin_unlock_irqrestore(&card->card_lock, flags);
843
844 return 0;
845 }
846
847 static int block_til_ready(struct tty_struct *tty, struct file *filp,
848 struct isi_port *port)
849 {
850 struct isi_board *card = port->card;
851 int do_clocal = 0, retval;
852 unsigned long flags;
853 DECLARE_WAITQUEUE(wait, current);
854
855 /* block if port is in the process of being closed */
856
857 if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) {
858 pr_dbg("block_til_ready: close in progress.\n");
859 interruptible_sleep_on(&port->close_wait);
860 if (port->flags & ASYNC_HUP_NOTIFY)
861 return -EAGAIN;
862 else
863 return -ERESTARTSYS;
864 }
865
866 /* if non-blocking mode is set ... */
867
868 if ((filp->f_flags & O_NONBLOCK) ||
869 (tty->flags & (1 << TTY_IO_ERROR))) {
870 pr_dbg("block_til_ready: non-block mode.\n");
871 port->flags |= ASYNC_NORMAL_ACTIVE;
872 return 0;
873 }
874
875 if (C_CLOCAL(tty))
876 do_clocal = 1;
877
878 /* block waiting for DCD to be asserted, and while
879 callout dev is busy */
880 retval = 0;
881 add_wait_queue(&port->open_wait, &wait);
882
883 spin_lock_irqsave(&card->card_lock, flags);
884 if (!tty_hung_up_p(filp))
885 port->count--;
886 port->blocked_open++;
887 spin_unlock_irqrestore(&card->card_lock, flags);
888
889 while (1) {
890 raise_dtr_rts(port);
891
892 set_current_state(TASK_INTERRUPTIBLE);
893 if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)) {
894 if (port->flags & ASYNC_HUP_NOTIFY)
895 retval = -EAGAIN;
896 else
897 retval = -ERESTARTSYS;
898 break;
899 }
900 if (!(port->flags & ASYNC_CLOSING) &&
901 (do_clocal || (port->status & ISI_DCD))) {
902 break;
903 }
904 if (signal_pending(current)) {
905 retval = -ERESTARTSYS;
906 break;
907 }
908 schedule();
909 }
910 set_current_state(TASK_RUNNING);
911 remove_wait_queue(&port->open_wait, &wait);
912 spin_lock_irqsave(&card->card_lock, flags);
913 if (!tty_hung_up_p(filp))
914 port->count++;
915 port->blocked_open--;
916 spin_unlock_irqrestore(&card->card_lock, flags);
917 if (retval)
918 return retval;
919 port->flags |= ASYNC_NORMAL_ACTIVE;
920 return 0;
921 }
922
923 static int isicom_open(struct tty_struct *tty, struct file *filp)
924 {
925 struct isi_port *port;
926 struct isi_board *card;
927 unsigned int board;
928 int error, line;
929
930 line = tty->index;
931 if (line < 0 || line > PORT_COUNT-1)
932 return -ENODEV;
933 board = BOARD(line);
934 card = &isi_card[board];
935
936 if (!(card->status & FIRMWARE_LOADED))
937 return -ENODEV;
938
939 /* open on a port greater than the port count for the card !!! */
940 if (line > ((board * 16) + card->port_count - 1))
941 return -ENODEV;
942
943 port = &isi_ports[line];
944 if (isicom_paranoia_check(port, tty->name, "isicom_open"))
945 return -ENODEV;
946
947 isicom_setup_board(card);
948
949 port->count++;
950 tty->driver_data = port;
951 port->tty = tty;
952 if ((error = isicom_setup_port(port))!=0)
953 return error;
954 if ((error = block_til_ready(tty, filp, port))!=0)
955 return error;
956
957 return 0;
958 }
959
960 /* close et all */
961
962 static inline void isicom_shutdown_board(struct isi_board *bp)
963 {
964 if (bp->status & BOARD_ACTIVE) {
965 bp->status &= ~BOARD_ACTIVE;
966 }
967 }
968
969 /* card->lock HAS to be held */
970 static void isicom_shutdown_port(struct isi_port *port)
971 {
972 struct isi_board *card = port->card;
973 struct tty_struct *tty;
974
975 tty = port->tty;
976
977 if (!(port->flags & ASYNC_INITIALIZED))
978 return;
979
980 if (port->xmit_buf) {
981 free_page((unsigned long) port->xmit_buf);
982 port->xmit_buf = NULL;
983 }
984 port->flags &= ~ASYNC_INITIALIZED;
985 /* 3rd October 2000 : Vinayak P Risbud */
986 port->tty = NULL;
987
988 /*Fix done by Anil .S on 30-04-2001
989 remote login through isi port has dtr toggle problem
990 due to which the carrier drops before the password prompt
991 appears on the remote end. Now we drop the dtr only if the
992 HUPCL(Hangup on close) flag is set for the tty*/
993
994 if (C_HUPCL(tty))
995 /* drop dtr on this port */
996 drop_dtr(port);
997
998 /* any other port uninits */
999 if (tty)
1000 set_bit(TTY_IO_ERROR, &tty->flags);
1001
1002 if (--card->count < 0) {
1003 pr_dbg("isicom_shutdown_port: bad board(0x%lx) count %d.\n",
1004 card->base, card->count);
1005 card->count = 0;
1006 }
1007
1008 /* last port was closed, shutdown that boad too */
1009 if (C_HUPCL(tty)) {
1010 if (!card->count)
1011 isicom_shutdown_board(card);
1012 }
1013 }
1014
1015 static void isicom_close(struct tty_struct *tty, struct file *filp)
1016 {
1017 struct isi_port *port = tty->driver_data;
1018 struct isi_board *card;
1019 unsigned long flags;
1020
1021 if (!port)
1022 return;
1023 card = port->card;
1024 if (isicom_paranoia_check(port, tty->name, "isicom_close"))
1025 return;
1026
1027 pr_dbg("Close start!!!.\n");
1028
1029 spin_lock_irqsave(&card->card_lock, flags);
1030 if (tty_hung_up_p(filp)) {
1031 spin_unlock_irqrestore(&card->card_lock, flags);
1032 return;
1033 }
1034
1035 if (tty->count == 1 && port->count != 1) {
1036 printk(KERN_WARNING "ISICOM:(0x%lx) isicom_close: bad port "
1037 "count tty->count = 1 port count = %d.\n",
1038 card->base, port->count);
1039 port->count = 1;
1040 }
1041 if (--port->count < 0) {
1042 printk(KERN_WARNING "ISICOM:(0x%lx) isicom_close: bad port "
1043 "count for channel%d = %d", card->base, port->channel,
1044 port->count);
1045 port->count = 0;
1046 }
1047
1048 if (port->count) {
1049 spin_unlock_irqrestore(&card->card_lock, flags);
1050 return;
1051 }
1052 port->flags |= ASYNC_CLOSING;
1053 tty->closing = 1;
1054 spin_unlock_irqrestore(&card->card_lock, flags);
1055
1056 if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE)
1057 tty_wait_until_sent(tty, port->closing_wait);
1058 /* indicate to the card that no more data can be received
1059 on this port */
1060 spin_lock_irqsave(&card->card_lock, flags);
1061 if (port->flags & ASYNC_INITIALIZED) {
1062 card->port_status &= ~(1 << port->channel);
1063 outw(card->port_status, card->base + 0x02);
1064 }
1065 isicom_shutdown_port(port);
1066 spin_unlock_irqrestore(&card->card_lock, flags);
1067
1068 if (tty->driver->flush_buffer)
1069 tty->driver->flush_buffer(tty);
1070 tty_ldisc_flush(tty);
1071
1072 spin_lock_irqsave(&card->card_lock, flags);
1073 tty->closing = 0;
1074
1075 if (port->blocked_open) {
1076 spin_unlock_irqrestore(&card->card_lock, flags);
1077 if (port->close_delay) {
1078 pr_dbg("scheduling until time out.\n");
1079 msleep_interruptible(
1080 jiffies_to_msecs(port->close_delay));
1081 }
1082 spin_lock_irqsave(&card->card_lock, flags);
1083 wake_up_interruptible(&port->open_wait);
1084 }
1085 port->flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING);
1086 wake_up_interruptible(&port->close_wait);
1087 spin_unlock_irqrestore(&card->card_lock, flags);
1088 }
1089
1090 /* write et all */
1091 static int isicom_write(struct tty_struct *tty, const unsigned char *buf,
1092 int count)
1093 {
1094 struct isi_port *port = tty->driver_data;
1095 struct isi_board *card = port->card;
1096 unsigned long flags;
1097 int cnt, total = 0;
1098
1099 if (isicom_paranoia_check(port, tty->name, "isicom_write"))
1100 return 0;
1101
1102 if (!port->xmit_buf)
1103 return 0;
1104
1105 spin_lock_irqsave(&card->card_lock, flags);
1106
1107 while(1) {
1108 cnt = min_t(int, count, min(SERIAL_XMIT_SIZE - port->xmit_cnt
1109 - 1, SERIAL_XMIT_SIZE - port->xmit_head));
1110 if (cnt <= 0)
1111 break;
1112
1113 memcpy(port->xmit_buf + port->xmit_head, buf, cnt);
1114 port->xmit_head = (port->xmit_head + cnt) & (SERIAL_XMIT_SIZE
1115 - 1);
1116 port->xmit_cnt += cnt;
1117 buf += cnt;
1118 count -= cnt;
1119 total += cnt;
1120 }
1121 if (port->xmit_cnt && !tty->stopped && !tty->hw_stopped)
1122 port->status |= ISI_TXOK;
1123 spin_unlock_irqrestore(&card->card_lock, flags);
1124 return total;
1125 }
1126
1127 /* put_char et all */
1128 static void isicom_put_char(struct tty_struct *tty, unsigned char ch)
1129 {
1130 struct isi_port *port = tty->driver_data;
1131 struct isi_board *card = port->card;
1132 unsigned long flags;
1133
1134 if (isicom_paranoia_check(port, tty->name, "isicom_put_char"))
1135 return;
1136
1137 if (!port->xmit_buf)
1138 return;
1139
1140 spin_lock_irqsave(&card->card_lock, flags);
1141 if (port->xmit_cnt >= SERIAL_XMIT_SIZE - 1) {
1142 spin_unlock_irqrestore(&card->card_lock, flags);
1143 return;
1144 }
1145
1146 port->xmit_buf[port->xmit_head++] = ch;
1147 port->xmit_head &= (SERIAL_XMIT_SIZE - 1);
1148 port->xmit_cnt++;
1149 spin_unlock_irqrestore(&card->card_lock, flags);
1150 }
1151
1152 /* flush_chars et all */
1153 static void isicom_flush_chars(struct tty_struct *tty)
1154 {
1155 struct isi_port *port = tty->driver_data;
1156
1157 if (isicom_paranoia_check(port, tty->name, "isicom_flush_chars"))
1158 return;
1159
1160 if (port->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped ||
1161 !port->xmit_buf)
1162 return;
1163
1164 /* this tells the transmitter to consider this port for
1165 data output to the card ... that's the best we can do. */
1166 port->status |= ISI_TXOK;
1167 }
1168
1169 /* write_room et all */
1170 static int isicom_write_room(struct tty_struct *tty)
1171 {
1172 struct isi_port *port = tty->driver_data;
1173 int free;
1174
1175 if (isicom_paranoia_check(port, tty->name, "isicom_write_room"))
1176 return 0;
1177
1178 free = SERIAL_XMIT_SIZE - port->xmit_cnt - 1;
1179 if (free < 0)
1180 free = 0;
1181 return free;
1182 }
1183
1184 /* chars_in_buffer et all */
1185 static int isicom_chars_in_buffer(struct tty_struct *tty)
1186 {
1187 struct isi_port *port = tty->driver_data;
1188 if (isicom_paranoia_check(port, tty->name, "isicom_chars_in_buffer"))
1189 return 0;
1190 return port->xmit_cnt;
1191 }
1192
1193 /* ioctl et all */
1194 static inline void isicom_send_break(struct isi_port *port,
1195 unsigned long length)
1196 {
1197 struct isi_board *card = port->card;
1198 unsigned long base = card->base;
1199
1200 if (!lock_card(card))
1201 return;
1202
1203 outw(0x8000 | ((port->channel) << (card->shift_count)) | 0x3, base);
1204 outw((length & 0xff) << 8 | 0x00, base);
1205 outw((length & 0xff00), base);
1206 InterruptTheCard(base);
1207
1208 unlock_card(card);
1209 }
1210
1211 static int isicom_tiocmget(struct tty_struct *tty, struct file *file)
1212 {
1213 struct isi_port *port = tty->driver_data;
1214 /* just send the port status */
1215 u16 status = port->status;
1216
1217 if (isicom_paranoia_check(port, tty->name, "isicom_ioctl"))
1218 return -ENODEV;
1219
1220 return ((status & ISI_RTS) ? TIOCM_RTS : 0) |
1221 ((status & ISI_DTR) ? TIOCM_DTR : 0) |
1222 ((status & ISI_DCD) ? TIOCM_CAR : 0) |
1223 ((status & ISI_DSR) ? TIOCM_DSR : 0) |
1224 ((status & ISI_CTS) ? TIOCM_CTS : 0) |
1225 ((status & ISI_RI ) ? TIOCM_RI : 0);
1226 }
1227
1228 static int isicom_tiocmset(struct tty_struct *tty, struct file *file,
1229 unsigned int set, unsigned int clear)
1230 {
1231 struct isi_port *port = tty->driver_data;
1232 unsigned long flags;
1233
1234 if (isicom_paranoia_check(port, tty->name, "isicom_ioctl"))
1235 return -ENODEV;
1236
1237 spin_lock_irqsave(&port->card->card_lock, flags);
1238 if (set & TIOCM_RTS)
1239 raise_rts(port);
1240 if (set & TIOCM_DTR)
1241 raise_dtr(port);
1242
1243 if (clear & TIOCM_RTS)
1244 drop_rts(port);
1245 if (clear & TIOCM_DTR)
1246 drop_dtr(port);
1247 spin_unlock_irqrestore(&port->card->card_lock, flags);
1248
1249 return 0;
1250 }
1251
1252 static int isicom_set_serial_info(struct isi_port *port,
1253 struct serial_struct __user *info)
1254 {
1255 struct serial_struct newinfo;
1256 int reconfig_port;
1257
1258 if (copy_from_user(&newinfo, info, sizeof(newinfo)))
1259 return -EFAULT;
1260
1261 reconfig_port = ((port->flags & ASYNC_SPD_MASK) !=
1262 (newinfo.flags & ASYNC_SPD_MASK));
1263
1264 if (!capable(CAP_SYS_ADMIN)) {
1265 if ((newinfo.close_delay != port->close_delay) ||
1266 (newinfo.closing_wait != port->closing_wait) ||
1267 ((newinfo.flags & ~ASYNC_USR_MASK) !=
1268 (port->flags & ~ASYNC_USR_MASK)))
1269 return -EPERM;
1270 port->flags = ((port->flags & ~ ASYNC_USR_MASK) |
1271 (newinfo.flags & ASYNC_USR_MASK));
1272 }
1273 else {
1274 port->close_delay = newinfo.close_delay;
1275 port->closing_wait = newinfo.closing_wait;
1276 port->flags = ((port->flags & ~ASYNC_FLAGS) |
1277 (newinfo.flags & ASYNC_FLAGS));
1278 }
1279 if (reconfig_port) {
1280 unsigned long flags;
1281 spin_lock_irqsave(&port->card->card_lock, flags);
1282 isicom_config_port(port);
1283 spin_unlock_irqrestore(&port->card->card_lock, flags);
1284 }
1285 return 0;
1286 }
1287
1288 static int isicom_get_serial_info(struct isi_port *port,
1289 struct serial_struct __user *info)
1290 {
1291 struct serial_struct out_info;
1292
1293 memset(&out_info, 0, sizeof(out_info));
1294 /* out_info.type = ? */
1295 out_info.line = port - isi_ports;
1296 out_info.port = port->card->base;
1297 out_info.irq = port->card->irq;
1298 out_info.flags = port->flags;
1299 /* out_info.baud_base = ? */
1300 out_info.close_delay = port->close_delay;
1301 out_info.closing_wait = port->closing_wait;
1302 if (copy_to_user(info, &out_info, sizeof(out_info)))
1303 return -EFAULT;
1304 return 0;
1305 }
1306
1307 static int isicom_ioctl(struct tty_struct *tty, struct file *filp,
1308 unsigned int cmd, unsigned long arg)
1309 {
1310 struct isi_port *port = tty->driver_data;
1311 void __user *argp = (void __user *)arg;
1312 int retval;
1313
1314 if (isicom_paranoia_check(port, tty->name, "isicom_ioctl"))
1315 return -ENODEV;
1316
1317 switch(cmd) {
1318 case TCSBRK:
1319 retval = tty_check_change(tty);
1320 if (retval)
1321 return retval;
1322 tty_wait_until_sent(tty, 0);
1323 if (!arg)
1324 isicom_send_break(port, HZ/4);
1325 return 0;
1326
1327 case TCSBRKP:
1328 retval = tty_check_change(tty);
1329 if (retval)
1330 return retval;
1331 tty_wait_until_sent(tty, 0);
1332 isicom_send_break(port, arg ? arg * (HZ/10) : HZ/4);
1333 return 0;
1334
1335 case TIOCGSOFTCAR:
1336 return put_user(C_CLOCAL(tty) ? 1 : 0,
1337 (unsigned long __user *)argp);
1338
1339 case TIOCSSOFTCAR:
1340 if (get_user(arg, (unsigned long __user *) argp))
1341 return -EFAULT;
1342 tty->termios->c_cflag =
1343 ((tty->termios->c_cflag & ~CLOCAL) |
1344 (arg ? CLOCAL : 0));
1345 return 0;
1346
1347 case TIOCGSERIAL:
1348 return isicom_get_serial_info(port, argp);
1349
1350 case TIOCSSERIAL:
1351 return isicom_set_serial_info(port, argp);
1352
1353 default:
1354 return -ENOIOCTLCMD;
1355 }
1356 return 0;
1357 }
1358
1359 /* set_termios et all */
1360 static void isicom_set_termios(struct tty_struct *tty,
1361 struct ktermios *old_termios)
1362 {
1363 struct isi_port *port = tty->driver_data;
1364 unsigned long flags;
1365
1366 if (isicom_paranoia_check(port, tty->name, "isicom_set_termios"))
1367 return;
1368
1369 if (tty->termios->c_cflag == old_termios->c_cflag &&
1370 tty->termios->c_iflag == old_termios->c_iflag)
1371 return;
1372
1373 spin_lock_irqsave(&port->card->card_lock, flags);
1374 isicom_config_port(port);
1375 spin_unlock_irqrestore(&port->card->card_lock, flags);
1376
1377 if ((old_termios->c_cflag & CRTSCTS) &&
1378 !(tty->termios->c_cflag & CRTSCTS)) {
1379 tty->hw_stopped = 0;
1380 isicom_start(tty);
1381 }
1382 }
1383
1384 /* throttle et all */
1385 static void isicom_throttle(struct tty_struct *tty)
1386 {
1387 struct isi_port *port = tty->driver_data;
1388 struct isi_board *card = port->card;
1389
1390 if (isicom_paranoia_check(port, tty->name, "isicom_throttle"))
1391 return;
1392
1393 /* tell the card that this port cannot handle any more data for now */
1394 card->port_status &= ~(1 << port->channel);
1395 outw(card->port_status, card->base + 0x02);
1396 }
1397
1398 /* unthrottle et all */
1399 static void isicom_unthrottle(struct tty_struct *tty)
1400 {
1401 struct isi_port *port = tty->driver_data;
1402 struct isi_board *card = port->card;
1403
1404 if (isicom_paranoia_check(port, tty->name, "isicom_unthrottle"))
1405 return;
1406
1407 /* tell the card that this port is ready to accept more data */
1408 card->port_status |= (1 << port->channel);
1409 outw(card->port_status, card->base + 0x02);
1410 }
1411
1412 /* stop et all */
1413 static void isicom_stop(struct tty_struct *tty)
1414 {
1415 struct isi_port *port = tty->driver_data;
1416
1417 if (isicom_paranoia_check(port, tty->name, "isicom_stop"))
1418 return;
1419
1420 /* this tells the transmitter not to consider this port for
1421 data output to the card. */
1422 port->status &= ~ISI_TXOK;
1423 }
1424
1425 /* start et all */
1426 static void isicom_start(struct tty_struct *tty)
1427 {
1428 struct isi_port *port = tty->driver_data;
1429
1430 if (isicom_paranoia_check(port, tty->name, "isicom_start"))
1431 return;
1432
1433 /* this tells the transmitter to consider this port for
1434 data output to the card. */
1435 port->status |= ISI_TXOK;
1436 }
1437
1438 static void isicom_hangup(struct tty_struct *tty)
1439 {
1440 struct isi_port *port = tty->driver_data;
1441 unsigned long flags;
1442
1443 if (isicom_paranoia_check(port, tty->name, "isicom_hangup"))
1444 return;
1445
1446 spin_lock_irqsave(&port->card->card_lock, flags);
1447 isicom_shutdown_port(port);
1448 spin_unlock_irqrestore(&port->card->card_lock, flags);
1449
1450 port->count = 0;
1451 port->flags &= ~ASYNC_NORMAL_ACTIVE;
1452 port->tty = NULL;
1453 wake_up_interruptible(&port->open_wait);
1454 }
1455
1456 /* flush_buffer et all */
1457 static void isicom_flush_buffer(struct tty_struct *tty)
1458 {
1459 struct isi_port *port = tty->driver_data;
1460 struct isi_board *card = port->card;
1461 unsigned long flags;
1462
1463 if (isicom_paranoia_check(port, tty->name, "isicom_flush_buffer"))
1464 return;
1465
1466 spin_lock_irqsave(&card->card_lock, flags);
1467 port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
1468 spin_unlock_irqrestore(&card->card_lock, flags);
1469
1470 tty_wakeup(tty);
1471 }
1472
1473 /*
1474 * Driver init and deinit functions
1475 */
1476
1477 static const struct tty_operations isicom_ops = {
1478 .open = isicom_open,
1479 .close = isicom_close,
1480 .write = isicom_write,
1481 .put_char = isicom_put_char,
1482 .flush_chars = isicom_flush_chars,
1483 .write_room = isicom_write_room,
1484 .chars_in_buffer = isicom_chars_in_buffer,
1485 .ioctl = isicom_ioctl,
1486 .set_termios = isicom_set_termios,
1487 .throttle = isicom_throttle,
1488 .unthrottle = isicom_unthrottle,
1489 .stop = isicom_stop,
1490 .start = isicom_start,
1491 .hangup = isicom_hangup,
1492 .flush_buffer = isicom_flush_buffer,
1493 .tiocmget = isicom_tiocmget,
1494 .tiocmset = isicom_tiocmset,
1495 };
1496
1497 static int __devinit reset_card(struct pci_dev *pdev,
1498 const unsigned int card, unsigned int *signature)
1499 {
1500 struct isi_board *board = pci_get_drvdata(pdev);
1501 unsigned long base = board->base;
1502 unsigned int sig, portcount = 0;
1503 int retval = 0;
1504
1505 dev_dbg(&pdev->dev, "ISILoad:Resetting Card%d at 0x%lx\n", card + 1,
1506 base);
1507
1508 inw(base + 0x8);
1509
1510 msleep(10);
1511
1512 outw(0, base + 0x8); /* Reset */
1513
1514 msleep(1000);
1515
1516 sig = inw(base + 0x4) & 0xff;
1517
1518 if (sig != 0xa5 && sig != 0xbb && sig != 0xcc && sig != 0xdd &&
1519 sig != 0xee) {
1520 dev_warn(&pdev->dev, "ISILoad:Card%u reset failure (Possible "
1521 "bad I/O Port Address 0x%lx).\n", card + 1, base);
1522 dev_dbg(&pdev->dev, "Sig=0x%x\n", sig);
1523 retval = -EIO;
1524 goto end;
1525 }
1526
1527 msleep(10);
1528
1529 portcount = inw(base + 0x2);
1530 if (!inw(base + 0xe) & 0x1 || (portcount != 0 && portcount != 4 &&
1531 portcount != 8 && portcount != 16)) {
1532 dev_err(&pdev->dev, "ISILoad:PCI Card%d reset failure.\n",
1533 card + 1);
1534 retval = -EIO;
1535 goto end;
1536 }
1537
1538 switch (sig) {
1539 case 0xa5:
1540 case 0xbb:
1541 case 0xdd:
1542 board->port_count = (portcount == 4) ? 4 : 8;
1543 board->shift_count = 12;
1544 break;
1545 case 0xcc:
1546 case 0xee:
1547 board->port_count = 16;
1548 board->shift_count = 11;
1549 break;
1550 }
1551 dev_info(&pdev->dev, "-Done\n");
1552 *signature = sig;
1553
1554 end:
1555 return retval;
1556 }
1557
1558 static int __devinit load_firmware(struct pci_dev *pdev,
1559 const unsigned int index, const unsigned int signature)
1560 {
1561 struct isi_board *board = pci_get_drvdata(pdev);
1562 const struct firmware *fw;
1563 unsigned long base = board->base;
1564 unsigned int a;
1565 u16 word_count, status;
1566 int retval = -EIO;
1567 char *name;
1568 u8 *data;
1569
1570 struct stframe {
1571 u16 addr;
1572 u16 count;
1573 u8 data[0];
1574 } *frame;
1575
1576 switch (signature) {
1577 case 0xa5:
1578 name = "isi608.bin";
1579 break;
1580 case 0xbb:
1581 name = "isi608em.bin";
1582 break;
1583 case 0xcc:
1584 name = "isi616em.bin";
1585 break;
1586 case 0xdd:
1587 name = "isi4608.bin";
1588 break;
1589 case 0xee:
1590 name = "isi4616.bin";
1591 break;
1592 default:
1593 dev_err(&pdev->dev, "Unknown signature.\n");
1594 goto end;
1595 }
1596
1597 retval = request_firmware(&fw, name, &pdev->dev);
1598 if (retval)
1599 goto end;
1600
1601 retval = -EIO;
1602
1603 for (frame = (struct stframe *)fw->data;
1604 frame < (struct stframe *)(fw->data + fw->size);
1605 frame = (struct stframe *)((u8 *)(frame + 1) +
1606 frame->count)) {
1607 if (WaitTillCardIsFree(base))
1608 goto errrelfw;
1609
1610 outw(0xf0, base); /* start upload sequence */
1611 outw(0x00, base);
1612 outw(frame->addr, base); /* lsb of address */
1613
1614 word_count = frame->count / 2 + frame->count % 2;
1615 outw(word_count, base);
1616 InterruptTheCard(base);
1617
1618 udelay(100); /* 0x2f */
1619
1620 if (WaitTillCardIsFree(base))
1621 goto errrelfw;
1622
1623 if ((status = inw(base + 0x4)) != 0) {
1624 dev_warn(&pdev->dev, "Card%d rejected load header:\n"
1625 KERN_WARNING "Address:0x%x\n"
1626 KERN_WARNING "Count:0x%x\n"
1627 KERN_WARNING "Status:0x%x\n",
1628 index + 1, frame->addr, frame->count, status);
1629 goto errrelfw;
1630 }
1631 outsw(base, frame->data, word_count);
1632
1633 InterruptTheCard(base);
1634
1635 udelay(50); /* 0x0f */
1636
1637 if (WaitTillCardIsFree(base))
1638 goto errrelfw;
1639
1640 if ((status = inw(base + 0x4)) != 0) {
1641 dev_err(&pdev->dev, "Card%d got out of sync.Card "
1642 "Status:0x%x\n", index + 1, status);
1643 goto errrelfw;
1644 }
1645 }
1646
1647 /* XXX: should we test it by reading it back and comparing with original like
1648 * in load firmware package? */
1649 for (frame = (struct stframe *)fw->data;
1650 frame < (struct stframe *)(fw->data + fw->size);
1651 frame = (struct stframe *)((u8 *)(frame + 1) +
1652 frame->count)) {
1653 if (WaitTillCardIsFree(base))
1654 goto errrelfw;
1655
1656 outw(0xf1, base); /* start download sequence */
1657 outw(0x00, base);
1658 outw(frame->addr, base); /* lsb of address */
1659
1660 word_count = (frame->count >> 1) + frame->count % 2;
1661 outw(word_count + 1, base);
1662 InterruptTheCard(base);
1663
1664 udelay(50); /* 0xf */
1665
1666 if (WaitTillCardIsFree(base))
1667 goto errrelfw;
1668
1669 if ((status = inw(base + 0x4)) != 0) {
1670 dev_warn(&pdev->dev, "Card%d rejected verify header:\n"
1671 KERN_WARNING "Address:0x%x\n"
1672 KERN_WARNING "Count:0x%x\n"
1673 KERN_WARNING "Status: 0x%x\n",
1674 index + 1, frame->addr, frame->count, status);
1675 goto errrelfw;
1676 }
1677
1678 data = kmalloc(word_count * 2, GFP_KERNEL);
1679 if (data == NULL) {
1680 dev_err(&pdev->dev, "Card%d, firmware upload "
1681 "failed, not enough memory\n", index + 1);
1682 goto errrelfw;
1683 }
1684 inw(base);
1685 insw(base, data, word_count);
1686 InterruptTheCard(base);
1687
1688 for (a = 0; a < frame->count; a++)
1689 if (data[a] != frame->data[a]) {
1690 kfree(data);
1691 dev_err(&pdev->dev, "Card%d, firmware upload "
1692 "failed\n", index + 1);
1693 goto errrelfw;
1694 }
1695 kfree(data);
1696
1697 udelay(50); /* 0xf */
1698
1699 if (WaitTillCardIsFree(base))
1700 goto errrelfw;
1701
1702 if ((status = inw(base + 0x4)) != 0) {
1703 dev_err(&pdev->dev, "Card%d verify got out of sync. "
1704 "Card Status:0x%x\n", index + 1, status);
1705 goto errrelfw;
1706 }
1707 }
1708
1709 /* xfer ctrl */
1710 if (WaitTillCardIsFree(base))
1711 goto errrelfw;
1712
1713 outw(0xf2, base);
1714 outw(0x800, base);
1715 outw(0x0, base);
1716 outw(0x0, base);
1717 InterruptTheCard(base);
1718 outw(0x0, base + 0x4); /* for ISI4608 cards */
1719
1720 board->status |= FIRMWARE_LOADED;
1721 retval = 0;
1722
1723 errrelfw:
1724 release_firmware(fw);
1725 end:
1726 return retval;
1727 }
1728
1729 /*
1730 * Insmod can set static symbols so keep these static
1731 */
1732 static unsigned int card_count;
1733
1734 static int __devinit isicom_probe(struct pci_dev *pdev,
1735 const struct pci_device_id *ent)
1736 {
1737 unsigned int signature, index;
1738 int retval = -EPERM;
1739 struct isi_board *board = NULL;
1740
1741 if (card_count >= BOARD_COUNT)
1742 goto err;
1743
1744 dev_info(&pdev->dev, "ISI PCI Card(Device ID 0x%x)\n", ent->device);
1745
1746 /* allot the first empty slot in the array */
1747 for (index = 0; index < BOARD_COUNT; index++)
1748 if (isi_card[index].base == 0) {
1749 board = &isi_card[index];
1750 break;
1751 }
1752
1753 board->index = index;
1754 board->base = pci_resource_start(pdev, 3);
1755 board->irq = pdev->irq;
1756 card_count++;
1757
1758 pci_set_drvdata(pdev, board);
1759
1760 retval = pci_request_region(pdev, 3, ISICOM_NAME);
1761 if (retval) {
1762 dev_err(&pdev->dev, "I/O Region 0x%lx-0x%lx is busy. Card%d "
1763 "will be disabled.\n", board->base, board->base + 15,
1764 index + 1);
1765 retval = -EBUSY;
1766 goto errdec;
1767 }
1768
1769 retval = request_irq(board->irq, isicom_interrupt,
1770 IRQF_SHARED | IRQF_DISABLED, ISICOM_NAME, board);
1771 if (retval < 0) {
1772 dev_err(&pdev->dev, "Could not install handler at Irq %d. "
1773 "Card%d will be disabled.\n", board->irq, index + 1);
1774 goto errunrr;
1775 }
1776
1777 retval = reset_card(pdev, index, &signature);
1778 if (retval < 0)
1779 goto errunri;
1780
1781 retval = load_firmware(pdev, index, signature);
1782 if (retval < 0)
1783 goto errunri;
1784
1785 for (index = 0; index < board->port_count; index++)
1786 tty_register_device(isicom_normal, board->index * 16 + index,
1787 &pdev->dev);
1788
1789 return 0;
1790
1791 errunri:
1792 free_irq(board->irq, board);
1793 errunrr:
1794 pci_release_region(pdev, 3);
1795 errdec:
1796 board->base = 0;
1797 card_count--;
1798 err:
1799 return retval;
1800 }
1801
1802 static void __devexit isicom_remove(struct pci_dev *pdev)
1803 {
1804 struct isi_board *board = pci_get_drvdata(pdev);
1805 unsigned int i;
1806
1807 for (i = 0; i < board->port_count; i++)
1808 tty_unregister_device(isicom_normal, board->index * 16 + i);
1809
1810 free_irq(board->irq, board);
1811 pci_release_region(pdev, 3);
1812 board->base = 0;
1813 card_count--;
1814 }
1815
1816 static int __init isicom_init(void)
1817 {
1818 int retval, idx, channel;
1819 struct isi_port *port;
1820
1821 for(idx = 0; idx < BOARD_COUNT; idx++) {
1822 port = &isi_ports[idx * 16];
1823 isi_card[idx].ports = port;
1824 spin_lock_init(&isi_card[idx].card_lock);
1825 for (channel = 0; channel < 16; channel++, port++) {
1826 port->magic = ISICOM_MAGIC;
1827 port->card = &isi_card[idx];
1828 port->channel = channel;
1829 port->close_delay = 50 * HZ/100;
1830 port->closing_wait = 3000 * HZ/100;
1831 port->status = 0;
1832 init_waitqueue_head(&port->open_wait);
1833 init_waitqueue_head(&port->close_wait);
1834 /* . . . */
1835 }
1836 isi_card[idx].base = 0;
1837 isi_card[idx].irq = 0;
1838 }
1839
1840 /* tty driver structure initialization */
1841 isicom_normal = alloc_tty_driver(PORT_COUNT);
1842 if (!isicom_normal) {
1843 retval = -ENOMEM;
1844 goto error;
1845 }
1846
1847 isicom_normal->owner = THIS_MODULE;
1848 isicom_normal->name = "ttyM";
1849 isicom_normal->major = ISICOM_NMAJOR;
1850 isicom_normal->minor_start = 0;
1851 isicom_normal->type = TTY_DRIVER_TYPE_SERIAL;
1852 isicom_normal->subtype = SERIAL_TYPE_NORMAL;
1853 isicom_normal->init_termios = tty_std_termios;
1854 isicom_normal->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL |
1855 CLOCAL;
1856 isicom_normal->flags = TTY_DRIVER_REAL_RAW |
1857 TTY_DRIVER_DYNAMIC_DEV;
1858 tty_set_operations(isicom_normal, &isicom_ops);
1859
1860 retval = tty_register_driver(isicom_normal);
1861 if (retval) {
1862 pr_dbg("Couldn't register the dialin driver\n");
1863 goto err_puttty;
1864 }
1865
1866 retval = pci_register_driver(&isicom_driver);
1867 if (retval < 0) {
1868 printk(KERN_ERR "ISICOM: Unable to register pci driver.\n");
1869 goto err_unrtty;
1870 }
1871
1872 mod_timer(&tx, jiffies + 1);
1873
1874 return 0;
1875 err_unrtty:
1876 tty_unregister_driver(isicom_normal);
1877 err_puttty:
1878 put_tty_driver(isicom_normal);
1879 error:
1880 return retval;
1881 }
1882
1883 static void __exit isicom_exit(void)
1884 {
1885 del_timer_sync(&tx);
1886
1887 pci_unregister_driver(&isicom_driver);
1888 tty_unregister_driver(isicom_normal);
1889 put_tty_driver(isicom_normal);
1890 }
1891
1892 module_init(isicom_init);
1893 module_exit(isicom_exit);
1894
1895 MODULE_AUTHOR("MultiTech");
1896 MODULE_DESCRIPTION("Driver for the ISI series of cards by MultiTech");
1897 MODULE_LICENSE("GPL");
WRT350N Kernel Patches