drivers/usb/serial/kl5kusb105.h

   1 /*
   2  * Definitions for the KLSI KL5KUSB105 serial port adapter
   3  */
   4
   5 /* vendor/product pairs that are known to contain this chipset */
   6 #define PALMCONNECT_VID         0x0830
   7 #define PALMCONNECT_PID         0x0080
   8
   9 #define KLSI_VID                0x05e9
  10 #define KLSI_KL5KUSB105D_PID    0x00c0
  11
  12 /* Vendor commands: */
  13
  14
  15 /* port table -- the chip supports up to 4 channels */
  16
  17 /* baud rates */
  18
  19 enum {
  20   kl5kusb105a_sio_b115200 = 0,
  21   kl5kusb105a_sio_b57600  = 1,
  22   kl5kusb105a_sio_b38400  = 2,
  23   kl5kusb105a_sio_b19200  = 4,
  24   kl5kusb105a_sio_b14400  = 5,
  25   kl5kusb105a_sio_b9600   = 6,
  26   kl5kusb105a_sio_b4800   = 8,   /* unchecked */
  27   kl5kusb105a_sio_b2400   = 9,   /* unchecked */
  28   kl5kusb105a_sio_b1200   = 0xa,  /* unchecked */
  29   kl5kusb105a_sio_b600    = 0xb   /* unchecked */
  30 };
  31
  32 /* data bits */
  33 #define kl5kusb105a_dtb_7   7
  34 #define kl5kusb105a_dtb_8   8
  35
  36
  37
  38 /* requests: */
  39 #define KL5KUSB105A_SIO_SET_DATA  1
  40 #define KL5KUSB105A_SIO_POLL      2
  41 #define KL5KUSB105A_SIO_CONFIGURE      3
  42 /* values used for request KL5KUSB105A_SIO_CONFIGURE */
  43 #define KL5KUSB105A_SIO_CONFIGURE_READ_ON      3
  44 #define KL5KUSB105A_SIO_CONFIGURE_READ_OFF     2
  45
  46 /* Interpretation of modem status lines */
  47 /* These need sorting out by individually connecting pins and checking
  48  * results. FIXME!
  49  * When data is being sent we see 0x30 in the lower byte; this must
  50  * contain DSR and CTS ...
  51  */
  52 #define KL5KUSB105A_DSR                 ((1<<4) | (1<<5))
  53 #define KL5KUSB105A_CTS                 ((1<<5) | (1<<4))
  54
  55 #define KL5KUSB105A_WANTS_TO_SEND       0x30
  56 //#define KL5KUSB105A_DTR                       /* Data Terminal Ready */
  57 //#define KL5KUSB105A_CTS                       /* Clear To Send */
  58 //#define KL5KUSB105A_CD                        /* Carrier Detect */
  59 //#define KL5KUSB105A_DSR                       /* Data Set Ready */
  60 //#define KL5KUSB105A_RxD                       /* Receive pin */
  61
  62 //#define KL5KUSB105A_LE
  63 //#define KL5KUSB105A_RTS
  64 //#define KL5KUSB105A_ST
  65 //#define KL5KUSB105A_SR
  66 //#define KL5KUSB105A_RI                        /* Ring Indicator */
  67
  68 /* vim: set ts=8 sts=8: */
  69