arch/mips/ite-boards/generic/irq.c

   1 /*
   2  * BRIEF MODULE DESCRIPTION
   3  *      ITE 8172G interrupt/setup routines.
   4  *
   5  * Copyright 2000,2001 MontaVista Software Inc.
   6  * Author: MontaVista Software, Inc.
   7  *              ppopov@mvista.com or source@mvista.com
   8  *
   9  * Part of this file was derived from Carsten Langgaard's
  10  * arch/mips/mips-boards/atlas/atlas_int.c.
  11  *
  12  * Carsten Langgaard, carstenl@mips.com
  13  * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
  14  *
  15  *  This program is free software; you can redistribute  it and/or modify it
  16  *  under  the terms of  the GNU General  Public License as published by the
  17  *  Free Software Foundation;  either version 2 of the  License, or (at your
  18  *  option) any later version.
  19  *
  20  *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
  21  *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
  22  *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
  23  *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
  24  *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  25  *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
  26  *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
  27  *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
  28  *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  29  *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  30  *
  31  *  You should have received a copy of the  GNU General Public License along
  32  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  33  *  675 Mass Ave, Cambridge, MA 02139, USA.
  34  */
  35 #include <linux/errno.h>
  36 #include <linux/init.h>
  37 #include <linux/irq.h>
  38 #include <linux/kernel_stat.h>
  39 #include <linux/module.h>
  40 #include <linux/signal.h>
  41 #include <linux/sched.h>
  42 #include <linux/types.h>
  43 #include <linux/interrupt.h>
  44 #include <linux/ioport.h>
  45 #include <linux/timex.h>
  46 #include <linux/slab.h>
  47 #include <linux/random.h>
  48 #include <linux/serial_reg.h>
  49 #include <linux/bitops.h>
  50
  51 #include <asm/bootinfo.h>
  52 #include <asm/io.h>
  53 #include <asm/mipsregs.h>
  54 #include <asm/system.h>
  55 #include <asm/it8172/it8172.h>
  56 #include <asm/it8172/it8172_int.h>
  57 #include <asm/it8172/it8172_dbg.h>
  58
  59 /* revisit */
  60 #define EXT_IRQ0_TO_IP 2 /* IP 2 */
  61 #define EXT_IRQ5_TO_IP 7 /* IP 7 */
  62
  63 #define ALLINTS_NOTIMER (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4)
  64
  65 void disable_it8172_irq(unsigned int irq_nr);
  66 void enable_it8172_irq(unsigned int irq_nr);
  67
  68 extern void set_debug_traps(void);
  69 extern void mips_timer_interrupt(int irq, struct pt_regs *regs);
  70 extern asmlinkage void it8172_IRQ(void);
  71
  72 struct it8172_intc_regs volatile *it8172_hw0_icregs =
  73         (struct it8172_intc_regs volatile *)(KSEG1ADDR(IT8172_PCI_IO_BASE + IT_INTC_BASE));
  74
  75 static void disable_it8172_irq(unsigned int irq_nr)
  76 {
  77         if ( (irq_nr >= IT8172_LPC_IRQ_BASE) && (irq_nr <= IT8172_SERIRQ_15)) {
  78                 /* LPC interrupt */
  79                 it8172_hw0_icregs->lpc_mask |=
  80                         (1 << (irq_nr - IT8172_LPC_IRQ_BASE));
  81         } else if ( (irq_nr >= IT8172_LB_IRQ_BASE) && (irq_nr <= IT8172_IOCHK_IRQ)) {
  82                 /* Local Bus interrupt */
  83                 it8172_hw0_icregs->lb_mask |=
  84                         (1 << (irq_nr - IT8172_LB_IRQ_BASE));
  85         } else if ( (irq_nr >= IT8172_PCI_DEV_IRQ_BASE) && (irq_nr <= IT8172_DMA_IRQ)) {
  86                 /* PCI and other interrupts */
  87                 it8172_hw0_icregs->pci_mask |=
  88                         (1 << (irq_nr - IT8172_PCI_DEV_IRQ_BASE));
  89         } else if ( (irq_nr >= IT8172_NMI_IRQ_BASE) && (irq_nr <= IT8172_POWER_NMI_IRQ)) {
  90                 /* NMI interrupts */
  91                 it8172_hw0_icregs->nmi_mask |=
  92                         (1 << (irq_nr - IT8172_NMI_IRQ_BASE));
  93         } else {
  94                 panic("disable_it8172_irq: bad irq %d", irq_nr);
  95         }
  96 }
  97
  98 static void enable_it8172_irq(unsigned int irq_nr)
  99 {
 100         if ( (irq_nr >= IT8172_LPC_IRQ_BASE) && (irq_nr <= IT8172_SERIRQ_15)) {
 101                 /* LPC interrupt */
 102                 it8172_hw0_icregs->lpc_mask &=
 103                         ~(1 << (irq_nr - IT8172_LPC_IRQ_BASE));
 104         }
 105         else if ( (irq_nr >= IT8172_LB_IRQ_BASE) && (irq_nr <= IT8172_IOCHK_IRQ)) {
 106                 /* Local Bus interrupt */
 107                 it8172_hw0_icregs->lb_mask &=
 108                         ~(1 << (irq_nr - IT8172_LB_IRQ_BASE));
 109         }
 110         else if ( (irq_nr >= IT8172_PCI_DEV_IRQ_BASE) && (irq_nr <= IT8172_DMA_IRQ)) {
 111                 /* PCI and other interrupts */
 112                 it8172_hw0_icregs->pci_mask &=
 113                         ~(1 << (irq_nr - IT8172_PCI_DEV_IRQ_BASE));
 114         }
 115         else if ( (irq_nr >= IT8172_NMI_IRQ_BASE) && (irq_nr <= IT8172_POWER_NMI_IRQ)) {
 116                 /* NMI interrupts */
 117                 it8172_hw0_icregs->nmi_mask &=
 118                         ~(1 << (irq_nr - IT8172_NMI_IRQ_BASE));
 119         }
 120         else {
 121                 panic("enable_it8172_irq: bad irq %d", irq_nr);
 122         }
 123 }
 124
 125 static unsigned int startup_ite_irq(unsigned int irq)
 126 {
 127         enable_it8172_irq(irq);
 128         return 0;
 129 }
 130
 131 #define shutdown_ite_irq        disable_it8172_irq
 132 #define mask_and_ack_ite_irq    disable_it8172_irq
 133
 134 static void end_ite_irq(unsigned int irq)
 135 {
 136         if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
 137                 enable_it8172_irq(irq);
 138 }
 139
 140 static struct hw_interrupt_type it8172_irq_type = {
 141         .typename = "ITE8172",
 142         .startup = startup_ite_irq,
 143         .shutdown = shutdown_ite_irq,
 144         .enable = enable_it8172_irq,
 145         .disable = disable_it8172_irq,
 146         .ack = mask_and_ack_ite_irq,
 147         .end = end_ite_irq,
 148 };
 149
 150
 151 static void enable_none(unsigned int irq) { }
 152 static unsigned int startup_none(unsigned int irq) { return 0; }
 153 static void disable_none(unsigned int irq) { }
 154 static void ack_none(unsigned int irq) { }
 155
 156 /* startup is the same as "enable", shutdown is same as "disable" */
 157 #define shutdown_none   disable_none
 158 #define end_none        enable_none
 159
 160 static struct hw_interrupt_type cp0_irq_type = {
 161         .typename = "CP0 Count",
 162         .startup = startup_none,
 163         .shutdown = shutdown_none,
 164         .enable = enable_none,
 165         .disable = disable_none,
 166         .ack = ack_none,
 167         .end = end_none
 168 };
 169
 170 void enable_cpu_timer(void)
 171 {
 172         unsigned long flags;
 173
 174         local_irq_save(flags);
 175         set_c0_status(0x100 << EXT_IRQ5_TO_IP);
 176         local_irq_restore(flags);
 177 }
 178
 179 void __init arch_init_irq(void)
 180 {
 181         int i;
 182         unsigned long flags;
 183
 184         set_except_vector(0, it8172_IRQ);
 185
 186         /* mask all interrupts */
 187         it8172_hw0_icregs->lb_mask  = 0xffff;
 188         it8172_hw0_icregs->lpc_mask = 0xffff;
 189         it8172_hw0_icregs->pci_mask = 0xffff;
 190         it8172_hw0_icregs->nmi_mask = 0xffff;
 191
 192         /* make all interrupts level triggered */
 193         it8172_hw0_icregs->lb_trigger  = 0;
 194         it8172_hw0_icregs->lpc_trigger = 0;
 195         it8172_hw0_icregs->pci_trigger = 0;
 196         it8172_hw0_icregs->nmi_trigger = 0;
 197
 198         /* active level setting */
 199         /* uart, keyboard, and mouse are active high */
 200         it8172_hw0_icregs->lpc_level = (0x10 | 0x2 | 0x1000);
 201         it8172_hw0_icregs->lb_level |= 0x20;
 202
 203         /* keyboard and mouse are edge triggered */
 204         it8172_hw0_icregs->lpc_trigger |= (0x2 | 0x1000);
 205
 206
 207 #if 0
 208         // Enable this piece of code to make internal USB interrupt
 209         // edge triggered.
 210         it8172_hw0_icregs->pci_trigger |=
 211                 (1 << (IT8172_USB_IRQ - IT8172_PCI_DEV_IRQ_BASE));
 212         it8172_hw0_icregs->pci_level &=
 213                 ~(1 << (IT8172_USB_IRQ - IT8172_PCI_DEV_IRQ_BASE));
 214 #endif
 215
 216         for (i = 0; i <= IT8172_LAST_IRQ; i++) {
 217                 irq_desc[i].handler = &it8172_irq_type;
 218                 spin_lock_init(&irq_desc[i].lock);
 219         }
 220         irq_desc[MIPS_CPU_TIMER_IRQ].handler = &cp0_irq_type;
 221         set_c0_status(ALLINTS_NOTIMER);
 222 }
 223
 224 void mips_spurious_interrupt(struct pt_regs *regs)
 225 {
 226 #if 1
 227         return;
 228 #else
 229         unsigned long status, cause;
 230
 231         printk("got spurious interrupt\n");
 232         status = read_c0_status();
 233         cause = read_c0_cause();
 234         printk("status %x cause %x\n", status, cause);
 235         printk("epc %x badvaddr %x \n", regs->cp0_epc, regs->cp0_badvaddr);
 236 #endif
 237 }
 238
 239 void it8172_hw0_irqdispatch(struct pt_regs *regs)
 240 {
 241         int irq;
 242         unsigned short intstatus = 0, status = 0;
 243
 244         intstatus = it8172_hw0_icregs->intstatus;
 245         if (intstatus & 0x8) {
 246                 panic("Got NMI interrupt");
 247         } else if (intstatus & 0x4) {
 248                 /* PCI interrupt */
 249                 irq = 0;
 250                 status |= it8172_hw0_icregs->pci_req;
 251                 while (!(status & 0x1)) {
 252                         irq++;
 253                         status >>= 1;
 254                 }
 255                 irq += IT8172_PCI_DEV_IRQ_BASE;
 256         } else if (intstatus & 0x1) {
 257                 /* Local Bus interrupt */
 258                 irq = 0;
 259                 status |= it8172_hw0_icregs->lb_req;
 260                 while (!(status & 0x1)) {
 261                         irq++;
 262                         status >>= 1;
 263                 }
 264                 irq += IT8172_LB_IRQ_BASE;
 265         } else if (intstatus & 0x2) {
 266                 /* LPC interrupt */
 267                 /* Since some lpc interrupts are edge triggered,
 268                  * we could lose an interrupt this way because
 269                  * we acknowledge all ints at onces. Revisit.
 270                  */
 271                 status |= it8172_hw0_icregs->lpc_req;
 272                 it8172_hw0_icregs->lpc_req = 0; /* acknowledge ints */
 273                 irq = 0;
 274                 while (!(status & 0x1)) {
 275                         irq++;
 276                         status >>= 1;
 277                 }
 278                 irq += IT8172_LPC_IRQ_BASE;
 279         } else
 280                 return;
 281
 282         do_IRQ(irq, regs);
 283 }
 284
 285 void show_pending_irqs(void)
 286 {
 287         fputs("intstatus:  ");
 288         put32(it8172_hw0_icregs->intstatus);
 289         puts("");
 290
 291         fputs("pci_req:  ");
 292         put32(it8172_hw0_icregs->pci_req);
 293         puts("");
 294
 295         fputs("lb_req:  ");
 296         put32(it8172_hw0_icregs->lb_req);
 297         puts("");
 298
 299         fputs("lpc_req:  ");
 300         put32(it8172_hw0_icregs->lpc_req);
 301         puts("");
 302 }