2 * drivers/net/ibm_emac/ibm_emac_core.h
4 * Driver for PowerPC 4xx on-chip ethernet controller.
6 * Copyright (c) 2004, 2005 Zultys Technologies.
7 * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
9 * Based on original work by
10 * Armin Kuster <akuster@mvista.com>
11 * Johnnie Peters <jpeters@mvista.com>
12 * Copyright 2000, 2001 MontaVista Softare Inc.
14 * This program is free software; you can redistribute it and/or modify it
15 * under the terms of the GNU General Public License as published by the
16 * Free Software Foundation; either version 2 of the License, or (at your
17 * option) any later version.
20 #ifndef __IBM_EMAC_CORE_H_
21 #define __IBM_EMAC_CORE_H_
23 #include <linux/config.h>
24 #include <linux/netdevice.h>
25 #include <linux/dma-mapping.h>
29 #include "ibm_emac_phy.h"
30 #include "ibm_emac_zmii.h"
31 #include "ibm_emac_rgmii.h"
32 #include "ibm_emac_mal.h"
33 #include "ibm_emac_tah.h"
35 #define NUM_TX_BUFF CONFIG_IBM_EMAC_TXB
36 #define NUM_RX_BUFF CONFIG_IBM_EMAC_RXB
38 /* Simple sanity check */
39 #if NUM_TX_BUFF > 256 || NUM_RX_BUFF > 256
40 #error Invalid number of buffer descriptors (greater than 256)
44 #define EMAC_MIN_MTU 46
45 #define EMAC_MAX_MTU 9000
47 /* Maximum L2 header length (VLAN tagged, no FCS) */
48 #define EMAC_MTU_OVERHEAD (6 * 2 + 2 + 4)
50 /* RX BD size for the given MTU */
51 static inline int emac_rx_size(int mtu
)
53 if (mtu
> ETH_DATA_LEN
)
54 return MAL_MAX_RX_SIZE
;
56 return mal_rx_size(ETH_DATA_LEN
+ EMAC_MTU_OVERHEAD
);
59 #define EMAC_DMA_ALIGN(x) ALIGN((x), dma_get_cache_alignment())
61 #define EMAC_RX_SKB_HEADROOM \
62 EMAC_DMA_ALIGN(CONFIG_IBM_EMAC_RX_SKB_HEADROOM)
64 /* Size of RX skb for the given MTU */
65 static inline int emac_rx_skb_size(int mtu
)
67 int size
= max(mtu
+ EMAC_MTU_OVERHEAD
, emac_rx_size(mtu
));
68 return EMAC_DMA_ALIGN(size
+ 2) + EMAC_RX_SKB_HEADROOM
;
71 /* RX DMA sync size */
72 static inline int emac_rx_sync_size(int mtu
)
74 return EMAC_DMA_ALIGN(emac_rx_size(mtu
) + 2);
77 /* Driver statistcs is split into two parts to make it more cache friendly:
78 * - normal statistics (packet count, etc)
81 * When statistics is requested by ethtool, these parts are concatenated,
82 * normal one goes first.
84 * Please, keep these structures in sync with emac_stats_keys.
87 /* Normal TX/RX Statistics */
88 struct ibm_emac_stats
{
97 /* Error statistics */
98 struct ibm_emac_error_stats
{
101 /* Software RX Errors */
102 u64 rx_dropped_stack
;
104 u64 rx_dropped_error
;
105 u64 rx_dropped_resize
;
108 /* BD reported RX errors */
111 u64 rx_bd_bad_packet
;
112 u64 rx_bd_runt_packet
;
113 u64 rx_bd_short_event
;
114 u64 rx_bd_alignment_error
;
116 u64 rx_bd_packet_too_long
;
117 u64 rx_bd_out_of_range
;
119 /* EMAC IRQ reported RX errors */
126 u64 rx_alignment_error
;
128 u64 rx_packet_too_long
;
132 /* Software TX Errors */
134 /* BD reported TX errors */
137 u64 tx_bd_carrier_loss
;
138 u64 tx_bd_excessive_deferral
;
139 u64 tx_bd_excessive_collisions
;
140 u64 tx_bd_late_collision
;
141 u64 tx_bd_multple_collisions
;
142 u64 tx_bd_single_collision
;
145 /* EMAC IRQ reported TX errors */
152 #define EMAC_ETHTOOL_STATS_COUNT ((sizeof(struct ibm_emac_stats) + \
153 sizeof(struct ibm_emac_error_stats)) \
156 struct ocp_enet_private
{
157 struct net_device
*ndev
; /* 0 */
158 struct emac_regs
*emacp
;
160 struct mal_descriptor
*tx_desc
;
165 struct mal_descriptor
*rx_desc
;
167 struct sk_buff
*rx_sg_skb
; /* 1 */
171 struct ibm_emac_stats stats
;
172 struct ocp_device
*tah_dev
;
174 struct ibm_ocp_mal
*mal
;
175 struct mal_commac commac
;
177 struct sk_buff
*tx_skb
[NUM_TX_BUFF
];
178 struct sk_buff
*rx_skb
[NUM_RX_BUFF
];
180 struct ocp_device
*zmii_dev
;
182 struct ocp_enet_private
*mdio_dev
;
183 struct ocp_device
*rgmii_dev
;
189 struct timer_list link_timer
;
192 int stop_timeout
; /* in us */
194 struct ibm_emac_error_stats estats
;
195 struct net_device_stats nstats
;
200 /* Ethtool get_regs complex data.
201 * We want to get not just EMAC registers, but also MAL, ZMII, RGMII, TAH
204 * Returned BLOB consists of the ibm_emac_ethtool_regs_hdr,
205 * MAL registers, EMAC registers and optional ZMII, RGMII, TAH registers.
206 * Each register component is preceded with emac_ethtool_regs_subhdr.
207 * Order of the optional headers follows their relative bit posititions
208 * in emac_ethtool_regs_hdr.components
210 #define EMAC_ETHTOOL_REGS_ZMII 0x00000001
211 #define EMAC_ETHTOOL_REGS_RGMII 0x00000002
212 #define EMAC_ETHTOOL_REGS_TAH 0x00000004
214 struct emac_ethtool_regs_hdr
{
218 struct emac_ethtool_regs_subhdr
{
223 #endif /* __IBM_EMAC_CORE_H_ */