?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
x86: cpa, eliminate CPA_ enum
[wrt350n-kernel.git] / drivers / scsi / qla2xxx / qla_isr.c
blob642a0c3f09c6a6a11fb9d99d884b1334d64aa651
1 /*
2 * QLogic Fibre Channel HBA Driver
3 * Copyright (c) 2003-2005 QLogic Corporation
4 *
5 * See LICENSE.qla2xxx for copyright and licensing details.
6 */
7 #include "qla_def.h"
8
9 #include <linux/delay.h>
10 #include <scsi/scsi_tcq.h>
11
12 static void qla2x00_mbx_completion(scsi_qla_host_t *, uint16_t);
13 static void qla2x00_process_completed_request(struct scsi_qla_host *, uint32_t);
14 static void qla2x00_status_entry(scsi_qla_host_t *, void *);
15 static void qla2x00_status_cont_entry(scsi_qla_host_t *, sts_cont_entry_t *);
16 static void qla2x00_error_entry(scsi_qla_host_t *, sts_entry_t *);
17 static void qla2x00_ms_entry(scsi_qla_host_t *, ms_iocb_entry_t *);
18
19 static void qla24xx_ms_entry(scsi_qla_host_t *, struct ct_entry_24xx *);
20
21 /**
22 * qla2100_intr_handler() - Process interrupts for the ISP2100 and ISP2200.
23 * @irq:
24 * @dev_id: SCSI driver HA context
25 *
26 * Called by system whenever the host adapter generates an interrupt.
27 *
28 * Returns handled flag.
29 */
30 irqreturn_t
31 qla2100_intr_handler(int irq, void *dev_id)
32 {
33 scsi_qla_host_t *ha;
34 struct device_reg_2xxx __iomem *reg;
35 int status;
36 unsigned long flags;
37 unsigned long iter;
38 uint16_t hccr;
39 uint16_t mb[4];
40
41 ha = (scsi_qla_host_t *) dev_id;
42 if (!ha) {
43 printk(KERN_INFO
44 "%s(): NULL host pointer\n", __func__);
45 return (IRQ_NONE);
46 }
47
48 reg = &ha->iobase->isp;
49 status = 0;
50
51 spin_lock_irqsave(&ha->hardware_lock, flags);
52 for (iter = 50; iter--; ) {
53 hccr = RD_REG_WORD(&reg->hccr);
54 if (hccr & HCCR_RISC_PAUSE) {
55 if (pci_channel_offline(ha->pdev))
56 break;
57
58 /*
59 * Issue a "HARD" reset in order for the RISC interrupt
60 * bit to be cleared. Schedule a big hammmer to get
61 * out of the RISC PAUSED state.
62 */
63 WRT_REG_WORD(&reg->hccr, HCCR_RESET_RISC);
64 RD_REG_WORD(&reg->hccr);
65
66 ha->isp_ops->fw_dump(ha, 1);
67 set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
68 break;
69 } else if ((RD_REG_WORD(&reg->istatus) & ISR_RISC_INT) == 0)
70 break;
71
72 if (RD_REG_WORD(&reg->semaphore) & BIT_0) {
73 WRT_REG_WORD(&reg->hccr, HCCR_CLR_RISC_INT);
74 RD_REG_WORD(&reg->hccr);
75
76 /* Get mailbox data. */
77 mb[0] = RD_MAILBOX_REG(ha, reg, 0);
78 if (mb[0] > 0x3fff && mb[0] < 0x8000) {
79 qla2x00_mbx_completion(ha, mb[0]);
80 status |= MBX_INTERRUPT;
81 } else if (mb[0] > 0x7fff && mb[0] < 0xc000) {
82 mb[1] = RD_MAILBOX_REG(ha, reg, 1);
83 mb[2] = RD_MAILBOX_REG(ha, reg, 2);
84 mb[3] = RD_MAILBOX_REG(ha, reg, 3);
85 qla2x00_async_event(ha, mb);
86 } else {
87 /*EMPTY*/
88 DEBUG2(printk("scsi(%ld): Unrecognized "
89 "interrupt type (%d).\n",
90 ha->host_no, mb[0]));
91 }
92 /* Release mailbox registers. */
93 WRT_REG_WORD(&reg->semaphore, 0);
94 RD_REG_WORD(&reg->semaphore);
95 } else {
96 qla2x00_process_response_queue(ha);
97
98 WRT_REG_WORD(&reg->hccr, HCCR_CLR_RISC_INT);
99 RD_REG_WORD(&reg->hccr);
100 }
101 }
102 spin_unlock_irqrestore(&ha->hardware_lock, flags);
103
104 if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags) &&
105 (status & MBX_INTERRUPT) && ha->flags.mbox_int) {
106 set_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags);
107 complete(&ha->mbx_intr_comp);
108 }
109
110 return (IRQ_HANDLED);
111 }
112
113 /**
114 * qla2300_intr_handler() - Process interrupts for the ISP23xx and ISP63xx.
115 * @irq:
116 * @dev_id: SCSI driver HA context
117 *
118 * Called by system whenever the host adapter generates an interrupt.
119 *
120 * Returns handled flag.
121 */
122 irqreturn_t
123 qla2300_intr_handler(int irq, void *dev_id)
124 {
125 scsi_qla_host_t *ha;
126 struct device_reg_2xxx __iomem *reg;
127 int status;
128 unsigned long flags;
129 unsigned long iter;
130 uint32_t stat;
131 uint16_t hccr;
132 uint16_t mb[4];
133
134 ha = (scsi_qla_host_t *) dev_id;
135 if (!ha) {
136 printk(KERN_INFO
137 "%s(): NULL host pointer\n", __func__);
138 return (IRQ_NONE);
139 }
140
141 reg = &ha->iobase->isp;
142 status = 0;
143
144 spin_lock_irqsave(&ha->hardware_lock, flags);
145 for (iter = 50; iter--; ) {
146 stat = RD_REG_DWORD(&reg->u.isp2300.host_status);
147 if (stat & HSR_RISC_PAUSED) {
148 if (pci_channel_offline(ha->pdev))
149 break;
150
151 hccr = RD_REG_WORD(&reg->hccr);
152 if (hccr & (BIT_15 | BIT_13 | BIT_11 | BIT_8))
153 qla_printk(KERN_INFO, ha, "Parity error -- "
154 "HCCR=%x, Dumping firmware!\n", hccr);
155 else
156 qla_printk(KERN_INFO, ha, "RISC paused -- "
157 "HCCR=%x, Dumping firmware!\n", hccr);
158
159 /*
160 * Issue a "HARD" reset in order for the RISC
161 * interrupt bit to be cleared. Schedule a big
162 * hammmer to get out of the RISC PAUSED state.
163 */
164 WRT_REG_WORD(&reg->hccr, HCCR_RESET_RISC);
165 RD_REG_WORD(&reg->hccr);
166
167 ha->isp_ops->fw_dump(ha, 1);
168 set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
169 break;
170 } else if ((stat & HSR_RISC_INT) == 0)
171 break;
172
173 switch (stat & 0xff) {
174 case 0x1:
175 case 0x2:
176 case 0x10:
177 case 0x11:
178 qla2x00_mbx_completion(ha, MSW(stat));
179 status |= MBX_INTERRUPT;
180
181 /* Release mailbox registers. */
182 WRT_REG_WORD(&reg->semaphore, 0);
183 break;
184 case 0x12:
185 mb[0] = MSW(stat);
186 mb[1] = RD_MAILBOX_REG(ha, reg, 1);
187 mb[2] = RD_MAILBOX_REG(ha, reg, 2);
188 mb[3] = RD_MAILBOX_REG(ha, reg, 3);
189 qla2x00_async_event(ha, mb);
190 break;
191 case 0x13:
192 qla2x00_process_response_queue(ha);
193 break;
194 case 0x15:
195 mb[0] = MBA_CMPLT_1_16BIT;
196 mb[1] = MSW(stat);
197 qla2x00_async_event(ha, mb);
198 break;
199 case 0x16:
200 mb[0] = MBA_SCSI_COMPLETION;
201 mb[1] = MSW(stat);
202 mb[2] = RD_MAILBOX_REG(ha, reg, 2);
203 qla2x00_async_event(ha, mb);
204 break;
205 default:
206 DEBUG2(printk("scsi(%ld): Unrecognized interrupt type "
207 "(%d).\n",
208 ha->host_no, stat & 0xff));
209 break;
210 }
211 WRT_REG_WORD(&reg->hccr, HCCR_CLR_RISC_INT);
212 RD_REG_WORD_RELAXED(&reg->hccr);
213 }
214 spin_unlock_irqrestore(&ha->hardware_lock, flags);
215
216 if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags) &&
217 (status & MBX_INTERRUPT) && ha->flags.mbox_int) {
218 set_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags);
219 complete(&ha->mbx_intr_comp);
220 }
221
222 return (IRQ_HANDLED);
223 }
224
225 /**
226 * qla2x00_mbx_completion() - Process mailbox command completions.
227 * @ha: SCSI driver HA context
228 * @mb0: Mailbox0 register
229 */
230 static void
231 qla2x00_mbx_completion(scsi_qla_host_t *ha, uint16_t mb0)
232 {
233 uint16_t cnt;
234 uint16_t __iomem *wptr;
235 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
236
237 /* Load return mailbox registers. */
238 ha->flags.mbox_int = 1;
239 ha->mailbox_out[0] = mb0;
240 wptr = (uint16_t __iomem *)MAILBOX_REG(ha, reg, 1);
241
242 for (cnt = 1; cnt < ha->mbx_count; cnt++) {
243 if (IS_QLA2200(ha) && cnt == 8)
244 wptr = (uint16_t __iomem *)MAILBOX_REG(ha, reg, 8);
245 if (cnt == 4 || cnt == 5)
246 ha->mailbox_out[cnt] = qla2x00_debounce_register(wptr);
247 else
248 ha->mailbox_out[cnt] = RD_REG_WORD(wptr);
249
250 wptr++;
251 }
252
253 if (ha->mcp) {
254 DEBUG3(printk("%s(%ld): Got mailbox completion. cmd=%x.\n",
255 __func__, ha->host_no, ha->mcp->mb[0]));
256 } else {
257 DEBUG2_3(printk("%s(%ld): MBX pointer ERROR!\n",
258 __func__, ha->host_no));
259 }
260 }
261
262 /**
263 * qla2x00_async_event() - Process aynchronous events.
264 * @ha: SCSI driver HA context
265 * @mb: Mailbox registers (0 - 3)
266 */
267 void
268 qla2x00_async_event(scsi_qla_host_t *ha, uint16_t *mb)
269 {
270 #define LS_UNKNOWN 2
271 static char *link_speeds[5] = { "1", "2", "?", "4", "8" };
272 char *link_speed;
273 uint16_t handle_cnt;
274 uint16_t cnt;
275 uint32_t handles[5];
276 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
277 uint32_t rscn_entry, host_pid;
278 uint8_t rscn_queue_index;
279
280 /* Setup to process RIO completion. */
281 handle_cnt = 0;
282 switch (mb[0]) {
283 case MBA_SCSI_COMPLETION:
284 handles[0] = le32_to_cpu((uint32_t)((mb[2] << 16) | mb[1]));
285 handle_cnt = 1;
286 break;
287 case MBA_CMPLT_1_16BIT:
288 handles[0] = mb[1];
289 handle_cnt = 1;
290 mb[0] = MBA_SCSI_COMPLETION;
291 break;
292 case MBA_CMPLT_2_16BIT:
293 handles[0] = mb[1];
294 handles[1] = mb[2];
295 handle_cnt = 2;
296 mb[0] = MBA_SCSI_COMPLETION;
297 break;
298 case MBA_CMPLT_3_16BIT:
299 handles[0] = mb[1];
300 handles[1] = mb[2];
301 handles[2] = mb[3];
302 handle_cnt = 3;
303 mb[0] = MBA_SCSI_COMPLETION;
304 break;
305 case MBA_CMPLT_4_16BIT:
306 handles[0] = mb[1];
307 handles[1] = mb[2];
308 handles[2] = mb[3];
309 handles[3] = (uint32_t)RD_MAILBOX_REG(ha, reg, 6);
310 handle_cnt = 4;
311 mb[0] = MBA_SCSI_COMPLETION;
312 break;
313 case MBA_CMPLT_5_16BIT:
314 handles[0] = mb[1];
315 handles[1] = mb[2];
316 handles[2] = mb[3];
317 handles[3] = (uint32_t)RD_MAILBOX_REG(ha, reg, 6);
318 handles[4] = (uint32_t)RD_MAILBOX_REG(ha, reg, 7);
319 handle_cnt = 5;
320 mb[0] = MBA_SCSI_COMPLETION;
321 break;
322 case MBA_CMPLT_2_32BIT:
323 handles[0] = le32_to_cpu((uint32_t)((mb[2] << 16) | mb[1]));
324 handles[1] = le32_to_cpu(
325 ((uint32_t)(RD_MAILBOX_REG(ha, reg, 7) << 16)) |
326 RD_MAILBOX_REG(ha, reg, 6));
327 handle_cnt = 2;
328 mb[0] = MBA_SCSI_COMPLETION;
329 break;
330 default:
331 break;
332 }
333
334 switch (mb[0]) {
335 case MBA_SCSI_COMPLETION: /* Fast Post */
336 if (!ha->flags.online)
337 break;
338
339 for (cnt = 0; cnt < handle_cnt; cnt++)
340 qla2x00_process_completed_request(ha, handles[cnt]);
341 break;
342
343 case MBA_RESET: /* Reset */
344 DEBUG2(printk("scsi(%ld): Asynchronous RESET.\n", ha->host_no));
345
346 set_bit(RESET_MARKER_NEEDED, &ha->dpc_flags);
347 break;
348
349 case MBA_SYSTEM_ERR: /* System Error */
350 qla_printk(KERN_INFO, ha,
351 "ISP System Error - mbx1=%xh mbx2=%xh mbx3=%xh.\n",
352 mb[1], mb[2], mb[3]);
353
354 ha->isp_ops->fw_dump(ha, 1);
355
356 if (IS_FWI2_CAPABLE(ha)) {
357 if (mb[1] == 0 && mb[2] == 0) {
358 qla_printk(KERN_ERR, ha,
359 "Unrecoverable Hardware Error: adapter "
360 "marked OFFLINE!\n");
361 ha->flags.online = 0;
362 } else
363 set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
364 } else if (mb[1] == 0) {
365 qla_printk(KERN_INFO, ha,
366 "Unrecoverable Hardware Error: adapter marked "
367 "OFFLINE!\n");
368 ha->flags.online = 0;
369 } else
370 set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
371 break;
372
373 case MBA_REQ_TRANSFER_ERR: /* Request Transfer Error */
374 DEBUG2(printk("scsi(%ld): ISP Request Transfer Error.\n",
375 ha->host_no));
376 qla_printk(KERN_WARNING, ha, "ISP Request Transfer Error.\n");
377
378 set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
379 break;
380
381 case MBA_RSP_TRANSFER_ERR: /* Response Transfer Error */
382 DEBUG2(printk("scsi(%ld): ISP Response Transfer Error.\n",
383 ha->host_no));
384 qla_printk(KERN_WARNING, ha, "ISP Response Transfer Error.\n");
385
386 set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
387 break;
388
389 case MBA_WAKEUP_THRES: /* Request Queue Wake-up */
390 DEBUG2(printk("scsi(%ld): Asynchronous WAKEUP_THRES.\n",
391 ha->host_no));
392 break;
393
394 case MBA_LIP_OCCURRED: /* Loop Initialization Procedure */
395 DEBUG2(printk("scsi(%ld): LIP occured (%x).\n", ha->host_no,
396 mb[1]));
397 qla_printk(KERN_INFO, ha, "LIP occured (%x).\n", mb[1]);
398
399 if (atomic_read(&ha->loop_state) != LOOP_DOWN) {
400 atomic_set(&ha->loop_state, LOOP_DOWN);
401 atomic_set(&ha->loop_down_timer, LOOP_DOWN_TIME);
402 qla2x00_mark_all_devices_lost(ha, 1);
403 }
404
405 if (ha->parent) {
406 atomic_set(&ha->vp_state, VP_FAILED);
407 fc_vport_set_state(ha->fc_vport, FC_VPORT_FAILED);
408 }
409
410 set_bit(REGISTER_FC4_NEEDED, &ha->dpc_flags);
411
412 ha->flags.management_server_logged_in = 0;
413 break;
414
415 case MBA_LOOP_UP: /* Loop Up Event */
416 if (IS_QLA2100(ha) || IS_QLA2200(ha)) {
417 link_speed = link_speeds[0];
418 ha->link_data_rate = PORT_SPEED_1GB;
419 } else {
420 link_speed = link_speeds[LS_UNKNOWN];
421 if (mb[1] < 5)
422 link_speed = link_speeds[mb[1]];
423 ha->link_data_rate = mb[1];
424 }
425
426 DEBUG2(printk("scsi(%ld): Asynchronous LOOP UP (%s Gbps).\n",
427 ha->host_no, link_speed));
428 qla_printk(KERN_INFO, ha, "LOOP UP detected (%s Gbps).\n",
429 link_speed);
430
431 ha->flags.management_server_logged_in = 0;
432 break;
433
434 case MBA_LOOP_DOWN: /* Loop Down Event */
435 DEBUG2(printk("scsi(%ld): Asynchronous LOOP DOWN (%x).\n",
436 ha->host_no, mb[1]));
437 qla_printk(KERN_INFO, ha, "LOOP DOWN detected (%x).\n", mb[1]);
438
439 if (atomic_read(&ha->loop_state) != LOOP_DOWN) {
440 atomic_set(&ha->loop_state, LOOP_DOWN);
441 atomic_set(&ha->loop_down_timer, LOOP_DOWN_TIME);
442 ha->device_flags |= DFLG_NO_CABLE;
443 qla2x00_mark_all_devices_lost(ha, 1);
444 }
445
446 if (ha->parent) {
447 atomic_set(&ha->vp_state, VP_FAILED);
448 fc_vport_set_state(ha->fc_vport, FC_VPORT_FAILED);
449 }
450
451 ha->flags.management_server_logged_in = 0;
452 ha->link_data_rate = PORT_SPEED_UNKNOWN;
453 if (ql2xfdmienable)
454 set_bit(REGISTER_FDMI_NEEDED, &ha->dpc_flags);
455 break;
456
457 case MBA_LIP_RESET: /* LIP reset occurred */
458 DEBUG2(printk("scsi(%ld): Asynchronous LIP RESET (%x).\n",
459 ha->host_no, mb[1]));
460 qla_printk(KERN_INFO, ha,
461 "LIP reset occured (%x).\n", mb[1]);
462
463 if (atomic_read(&ha->loop_state) != LOOP_DOWN) {
464 atomic_set(&ha->loop_state, LOOP_DOWN);
465 atomic_set(&ha->loop_down_timer, LOOP_DOWN_TIME);
466 qla2x00_mark_all_devices_lost(ha, 1);
467 }
468
469 if (ha->parent) {
470 atomic_set(&ha->vp_state, VP_FAILED);
471 fc_vport_set_state(ha->fc_vport, FC_VPORT_FAILED);
472 }
473
474 set_bit(RESET_MARKER_NEEDED, &ha->dpc_flags);
475
476 ha->operating_mode = LOOP;
477 ha->flags.management_server_logged_in = 0;
478 break;
479
480 case MBA_POINT_TO_POINT: /* Point-to-Point */
481 if (IS_QLA2100(ha))
482 break;
483
484 DEBUG2(printk("scsi(%ld): Asynchronous P2P MODE received.\n",
485 ha->host_no));
486
487 /*
488 * Until there's a transition from loop down to loop up, treat
489 * this as loop down only.
490 */
491 if (atomic_read(&ha->loop_state) != LOOP_DOWN) {
492 atomic_set(&ha->loop_state, LOOP_DOWN);
493 if (!atomic_read(&ha->loop_down_timer))
494 atomic_set(&ha->loop_down_timer,
495 LOOP_DOWN_TIME);
496 qla2x00_mark_all_devices_lost(ha, 1);
497 }
498
499 if (ha->parent) {
500 atomic_set(&ha->vp_state, VP_FAILED);
501 fc_vport_set_state(ha->fc_vport, FC_VPORT_FAILED);
502 }
503
504 if (!(test_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags))) {
505 set_bit(RESET_MARKER_NEEDED, &ha->dpc_flags);
506 }
507 set_bit(REGISTER_FC4_NEEDED, &ha->dpc_flags);
508
509 ha->flags.gpsc_supported = 1;
510 ha->flags.management_server_logged_in = 0;
511 break;
512
513 case MBA_CHG_IN_CONNECTION: /* Change in connection mode */
514 if (IS_QLA2100(ha))
515 break;
516
517 DEBUG2(printk("scsi(%ld): Asynchronous Change In Connection "
518 "received.\n",
519 ha->host_no));
520 qla_printk(KERN_INFO, ha,
521 "Configuration change detected: value=%x.\n", mb[1]);
522
523 if (atomic_read(&ha->loop_state) != LOOP_DOWN) {
524 atomic_set(&ha->loop_state, LOOP_DOWN);
525 if (!atomic_read(&ha->loop_down_timer))
526 atomic_set(&ha->loop_down_timer,
527 LOOP_DOWN_TIME);
528 qla2x00_mark_all_devices_lost(ha, 1);
529 }
530
531 if (ha->parent) {
532 atomic_set(&ha->vp_state, VP_FAILED);
533 fc_vport_set_state(ha->fc_vport, FC_VPORT_FAILED);
534 }
535
536 set_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags);
537 set_bit(LOCAL_LOOP_UPDATE, &ha->dpc_flags);
538 break;
539
540 case MBA_PORT_UPDATE: /* Port database update */
541 /*
542 * If PORT UPDATE is global (recieved LIP_OCCURED/LIP_RESET
543 * event etc. earlier indicating loop is down) then process
544 * it. Otherwise ignore it and Wait for RSCN to come in.
545 */
546 atomic_set(&ha->loop_down_timer, 0);
547 if (atomic_read(&ha->loop_state) != LOOP_DOWN &&
548 atomic_read(&ha->loop_state) != LOOP_DEAD) {
549 DEBUG2(printk("scsi(%ld): Asynchronous PORT UPDATE "
550 "ignored %04x/%04x/%04x.\n", ha->host_no, mb[1],
551 mb[2], mb[3]));
552 break;
553 }
554
555 DEBUG2(printk("scsi(%ld): Asynchronous PORT UPDATE.\n",
556 ha->host_no));
557 DEBUG(printk(KERN_INFO
558 "scsi(%ld): Port database changed %04x %04x %04x.\n",
559 ha->host_no, mb[1], mb[2], mb[3]));
560
561 /*
562 * Mark all devices as missing so we will login again.
563 */
564 atomic_set(&ha->loop_state, LOOP_UP);
565
566 qla2x00_mark_all_devices_lost(ha, 1);
567
568 ha->flags.rscn_queue_overflow = 1;
569
570 set_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags);
571 set_bit(LOCAL_LOOP_UPDATE, &ha->dpc_flags);
572 break;
573
574 case MBA_RSCN_UPDATE: /* State Change Registration */
575 /* Check if the Vport has issued a SCR */
576 if (ha->parent && test_bit(VP_SCR_NEEDED, &ha->vp_flags))
577 break;
578 /* Only handle SCNs for our Vport index. */
579 if (ha->flags.npiv_supported && ha->vp_idx != mb[3])
580 break;
581
582 DEBUG2(printk("scsi(%ld): Asynchronous RSCR UPDATE.\n",
583 ha->host_no));
584 DEBUG(printk(KERN_INFO
585 "scsi(%ld): RSCN database changed -- %04x %04x %04x.\n",
586 ha->host_no, mb[1], mb[2], mb[3]));
587
588 rscn_entry = (mb[1] << 16) | mb[2];
589 host_pid = (ha->d_id.b.domain << 16) | (ha->d_id.b.area << 8) |
590 ha->d_id.b.al_pa;
591 if (rscn_entry == host_pid) {
592 DEBUG(printk(KERN_INFO
593 "scsi(%ld): Ignoring RSCN update to local host "
594 "port ID (%06x)\n",
595 ha->host_no, host_pid));
596 break;
597 }
598
599 rscn_queue_index = ha->rscn_in_ptr + 1;
600 if (rscn_queue_index == MAX_RSCN_COUNT)
601 rscn_queue_index = 0;
602 if (rscn_queue_index != ha->rscn_out_ptr) {
603 ha->rscn_queue[ha->rscn_in_ptr] = rscn_entry;
604 ha->rscn_in_ptr = rscn_queue_index;
605 } else {
606 ha->flags.rscn_queue_overflow = 1;
607 }
608
609 atomic_set(&ha->loop_state, LOOP_UPDATE);
610 atomic_set(&ha->loop_down_timer, 0);
611 ha->flags.management_server_logged_in = 0;
612
613 set_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags);
614 set_bit(RSCN_UPDATE, &ha->dpc_flags);
615 break;
616
617 /* case MBA_RIO_RESPONSE: */
618 case MBA_ZIO_RESPONSE:
619 DEBUG2(printk("scsi(%ld): [R|Z]IO update completion.\n",
620 ha->host_no));
621 DEBUG(printk(KERN_INFO
622 "scsi(%ld): [R|Z]IO update completion.\n",
623 ha->host_no));
624
625 if (IS_FWI2_CAPABLE(ha))
626 qla24xx_process_response_queue(ha);
627 else
628 qla2x00_process_response_queue(ha);
629 break;
630
631 case MBA_DISCARD_RND_FRAME:
632 DEBUG2(printk("scsi(%ld): Discard RND Frame -- %04x %04x "
633 "%04x.\n", ha->host_no, mb[1], mb[2], mb[3]));
634 break;
635
636 case MBA_TRACE_NOTIFICATION:
637 DEBUG2(printk("scsi(%ld): Trace Notification -- %04x %04x.\n",
638 ha->host_no, mb[1], mb[2]));
639 break;
640 }
641
642 if (!ha->parent && ha->num_vhosts)
643 qla2x00_alert_all_vps(ha, mb);
644 }
645
646 static void
647 qla2x00_adjust_sdev_qdepth_up(struct scsi_device *sdev, void *data)
648 {
649 fc_port_t *fcport = data;
650
651 if (fcport->ha->max_q_depth <= sdev->queue_depth)
652 return;
653
654 if (sdev->ordered_tags)
655 scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG,
656 sdev->queue_depth + 1);
657 else
658 scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG,
659 sdev->queue_depth + 1);
660
661 fcport->last_ramp_up = jiffies;
662
663 DEBUG2(qla_printk(KERN_INFO, fcport->ha,
664 "scsi(%ld:%d:%d:%d): Queue depth adjusted-up to %d.\n",
665 fcport->ha->host_no, sdev->channel, sdev->id, sdev->lun,
666 sdev->queue_depth));
667 }
668
669 static void
670 qla2x00_adjust_sdev_qdepth_down(struct scsi_device *sdev, void *data)
671 {
672 fc_port_t *fcport = data;
673
674 if (!scsi_track_queue_full(sdev, sdev->queue_depth - 1))
675 return;
676
677 DEBUG2(qla_printk(KERN_INFO, fcport->ha,
678 "scsi(%ld:%d:%d:%d): Queue depth adjusted-down to %d.\n",
679 fcport->ha->host_no, sdev->channel, sdev->id, sdev->lun,
680 sdev->queue_depth));
681 }
682
683 static inline void
684 qla2x00_ramp_up_queue_depth(scsi_qla_host_t *ha, srb_t *sp)
685 {
686 fc_port_t *fcport;
687 struct scsi_device *sdev;
688
689 sdev = sp->cmd->device;
690 if (sdev->queue_depth >= ha->max_q_depth)
691 return;
692
693 fcport = sp->fcport;
694 if (time_before(jiffies,
695 fcport->last_ramp_up + ql2xqfullrampup * HZ))
696 return;
697 if (time_before(jiffies,
698 fcport->last_queue_full + ql2xqfullrampup * HZ))
699 return;
700
701 starget_for_each_device(sdev->sdev_target, fcport,
702 qla2x00_adjust_sdev_qdepth_up);
703 }
704
705 /**
706 * qla2x00_process_completed_request() - Process a Fast Post response.
707 * @ha: SCSI driver HA context
708 * @index: SRB index
709 */
710 static void
711 qla2x00_process_completed_request(struct scsi_qla_host *ha, uint32_t index)
712 {
713 srb_t *sp;
714
715 /* Validate handle. */
716 if (index >= MAX_OUTSTANDING_COMMANDS) {
717 DEBUG2(printk("scsi(%ld): Invalid SCSI completion handle %d.\n",
718 ha->host_no, index));
719 qla_printk(KERN_WARNING, ha,
720 "Invalid SCSI completion handle %d.\n", index);
721
722 set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
723 return;
724 }
725
726 sp = ha->outstanding_cmds[index];
727 if (sp) {
728 /* Free outstanding command slot. */
729 ha->outstanding_cmds[index] = NULL;
730
731 CMD_COMPL_STATUS(sp->cmd) = 0L;
732 CMD_SCSI_STATUS(sp->cmd) = 0L;
733
734 /* Save ISP completion status */
735 sp->cmd->result = DID_OK << 16;
736
737 qla2x00_ramp_up_queue_depth(ha, sp);
738 qla2x00_sp_compl(ha, sp);
739 } else {
740 DEBUG2(printk("scsi(%ld): Invalid ISP SCSI completion handle\n",
741 ha->host_no));
742 qla_printk(KERN_WARNING, ha,
743 "Invalid ISP SCSI completion handle\n");
744
745 set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
746 }
747 }
748
749 /**
750 * qla2x00_process_response_queue() - Process response queue entries.
751 * @ha: SCSI driver HA context
752 */
753 void
754 qla2x00_process_response_queue(struct scsi_qla_host *ha)
755 {
756 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
757 sts_entry_t *pkt;
758 uint16_t handle_cnt;
759 uint16_t cnt;
760
761 if (!ha->flags.online)
762 return;
763
764 while (ha->response_ring_ptr->signature != RESPONSE_PROCESSED) {
765 pkt = (sts_entry_t *)ha->response_ring_ptr;
766
767 ha->rsp_ring_index++;
768 if (ha->rsp_ring_index == ha->response_q_length) {
769 ha->rsp_ring_index = 0;
770 ha->response_ring_ptr = ha->response_ring;
771 } else {
772 ha->response_ring_ptr++;
773 }
774
775 if (pkt->entry_status != 0) {
776 DEBUG3(printk(KERN_INFO
777 "scsi(%ld): Process error entry.\n", ha->host_no));
778
779 qla2x00_error_entry(ha, pkt);
780 ((response_t *)pkt)->signature = RESPONSE_PROCESSED;
781 wmb();
782 continue;
783 }
784
785 switch (pkt->entry_type) {
786 case STATUS_TYPE:
787 qla2x00_status_entry(ha, pkt);
788 break;
789 case STATUS_TYPE_21:
790 handle_cnt = ((sts21_entry_t *)pkt)->handle_count;
791 for (cnt = 0; cnt < handle_cnt; cnt++) {
792 qla2x00_process_completed_request(ha,
793 ((sts21_entry_t *)pkt)->handle[cnt]);
794 }
795 break;
796 case STATUS_TYPE_22:
797 handle_cnt = ((sts22_entry_t *)pkt)->handle_count;
798 for (cnt = 0; cnt < handle_cnt; cnt++) {
799 qla2x00_process_completed_request(ha,
800 ((sts22_entry_t *)pkt)->handle[cnt]);
801 }
802 break;
803 case STATUS_CONT_TYPE:
804 qla2x00_status_cont_entry(ha, (sts_cont_entry_t *)pkt);
805 break;
806 case MS_IOCB_TYPE:
807 qla2x00_ms_entry(ha, (ms_iocb_entry_t *)pkt);
808 break;
809 default:
810 /* Type Not Supported. */
811 DEBUG4(printk(KERN_WARNING
812 "scsi(%ld): Received unknown response pkt type %x "
813 "entry status=%x.\n",
814 ha->host_no, pkt->entry_type, pkt->entry_status));
815 break;
816 }
817 ((response_t *)pkt)->signature = RESPONSE_PROCESSED;
818 wmb();
819 }
820
821 /* Adjust ring index */
822 WRT_REG_WORD(ISP_RSP_Q_OUT(ha, reg), ha->rsp_ring_index);
823 }
824
825 static inline void
826 qla2x00_handle_sense(srb_t *sp, uint8_t *sense_data, uint32_t sense_len)
827 {
828 struct scsi_cmnd *cp = sp->cmd;
829
830 if (sense_len >= SCSI_SENSE_BUFFERSIZE)
831 sense_len = SCSI_SENSE_BUFFERSIZE;
832
833 CMD_ACTUAL_SNSLEN(cp) = sense_len;
834 sp->request_sense_length = sense_len;
835 sp->request_sense_ptr = cp->sense_buffer;
836 if (sp->request_sense_length > 32)
837 sense_len = 32;
838
839 memcpy(cp->sense_buffer, sense_data, sense_len);
840
841 sp->request_sense_ptr += sense_len;
842 sp->request_sense_length -= sense_len;
843 if (sp->request_sense_length != 0)
844 sp->ha->status_srb = sp;
845
846 DEBUG5(printk("%s(): Check condition Sense data, scsi(%ld:%d:%d:%d) "
847 "cmd=%p pid=%ld\n", __func__, sp->ha->host_no, cp->device->channel,
848 cp->device->id, cp->device->lun, cp, cp->serial_number));
849 if (sense_len)
850 DEBUG5(qla2x00_dump_buffer(cp->sense_buffer,
851 CMD_ACTUAL_SNSLEN(cp)));
852 }
853
854 /**
855 * qla2x00_status_entry() - Process a Status IOCB entry.
856 * @ha: SCSI driver HA context
857 * @pkt: Entry pointer
858 */
859 static void
860 qla2x00_status_entry(scsi_qla_host_t *ha, void *pkt)
861 {
862 srb_t *sp;
863 fc_port_t *fcport;
864 struct scsi_cmnd *cp;
865 sts_entry_t *sts;
866 struct sts_entry_24xx *sts24;
867 uint16_t comp_status;
868 uint16_t scsi_status;
869 uint8_t lscsi_status;
870 int32_t resid;
871 uint32_t sense_len, rsp_info_len, resid_len, fw_resid_len;
872 uint8_t *rsp_info, *sense_data;
873
874 sts = (sts_entry_t *) pkt;
875 sts24 = (struct sts_entry_24xx *) pkt;
876 if (IS_FWI2_CAPABLE(ha)) {
877 comp_status = le16_to_cpu(sts24->comp_status);
878 scsi_status = le16_to_cpu(sts24->scsi_status) & SS_MASK;
879 } else {
880 comp_status = le16_to_cpu(sts->comp_status);
881 scsi_status = le16_to_cpu(sts->scsi_status) & SS_MASK;
882 }
883
884 /* Fast path completion. */
885 if (comp_status == CS_COMPLETE && scsi_status == 0) {
886 qla2x00_process_completed_request(ha, sts->handle);
887
888 return;
889 }
890
891 /* Validate handle. */
892 if (sts->handle < MAX_OUTSTANDING_COMMANDS) {
893 sp = ha->outstanding_cmds[sts->handle];
894 ha->outstanding_cmds[sts->handle] = NULL;
895 } else
896 sp = NULL;
897
898 if (sp == NULL) {
899 DEBUG2(printk("scsi(%ld): Status Entry invalid handle.\n",
900 ha->host_no));
901 qla_printk(KERN_WARNING, ha, "Status Entry invalid handle.\n");
902
903 set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
904 qla2xxx_wake_dpc(ha);
905 return;
906 }
907 cp = sp->cmd;
908 if (cp == NULL) {
909 DEBUG2(printk("scsi(%ld): Command already returned back to OS "
910 "pkt->handle=%d sp=%p.\n", ha->host_no, sts->handle, sp));
911 qla_printk(KERN_WARNING, ha,
912 "Command is NULL: already returned to OS (sp=%p)\n", sp);
913
914 return;
915 }
916
917 lscsi_status = scsi_status & STATUS_MASK;
918 CMD_ENTRY_STATUS(cp) = sts->entry_status;
919 CMD_COMPL_STATUS(cp) = comp_status;
920 CMD_SCSI_STATUS(cp) = scsi_status;
921
922 fcport = sp->fcport;
923
924 sense_len = rsp_info_len = resid_len = fw_resid_len = 0;
925 if (IS_FWI2_CAPABLE(ha)) {
926 sense_len = le32_to_cpu(sts24->sense_len);
927 rsp_info_len = le32_to_cpu(sts24->rsp_data_len);
928 resid_len = le32_to_cpu(sts24->rsp_residual_count);
929 fw_resid_len = le32_to_cpu(sts24->residual_len);
930 rsp_info = sts24->data;
931 sense_data = sts24->data;
932 host_to_fcp_swap(sts24->data, sizeof(sts24->data));
933 } else {
934 sense_len = le16_to_cpu(sts->req_sense_length);
935 rsp_info_len = le16_to_cpu(sts->rsp_info_len);
936 resid_len = le32_to_cpu(sts->residual_length);
937 rsp_info = sts->rsp_info;
938 sense_data = sts->req_sense_data;
939 }
940
941 /* Check for any FCP transport errors. */
942 if (scsi_status & SS_RESPONSE_INFO_LEN_VALID) {
943 /* Sense data lies beyond any FCP RESPONSE data. */
944 if (IS_FWI2_CAPABLE(ha))
945 sense_data += rsp_info_len;
946 if (rsp_info_len > 3 && rsp_info[3]) {
947 DEBUG2(printk("scsi(%ld:%d:%d:%d) FCP I/O protocol "
948 "failure (%x/%02x%02x%02x%02x%02x%02x%02x%02x)..."
949 "retrying command\n", ha->host_no,
950 cp->device->channel, cp->device->id,
951 cp->device->lun, rsp_info_len, rsp_info[0],
952 rsp_info[1], rsp_info[2], rsp_info[3], rsp_info[4],
953 rsp_info[5], rsp_info[6], rsp_info[7]));
954
955 cp->result = DID_BUS_BUSY << 16;
956 qla2x00_sp_compl(ha, sp);
957 return;
958 }
959 }
960
961 /*
962 * Based on Host and scsi status generate status code for Linux
963 */
964 switch (comp_status) {
965 case CS_COMPLETE:
966 case CS_QUEUE_FULL:
967 if (scsi_status == 0) {
968 cp->result = DID_OK << 16;
969 break;
970 }
971 if (scsi_status & (SS_RESIDUAL_UNDER | SS_RESIDUAL_OVER)) {
972 resid = resid_len;
973 scsi_set_resid(cp, resid);
974 CMD_RESID_LEN(cp) = resid;
975
976 if (!lscsi_status &&
977 ((unsigned)(scsi_bufflen(cp) - resid) <
978 cp->underflow)) {
979 qla_printk(KERN_INFO, ha,
980 "scsi(%ld:%d:%d:%d): Mid-layer underflow "
981 "detected (%x of %x bytes)...returning "
982 "error status.\n", ha->host_no,
983 cp->device->channel, cp->device->id,
984 cp->device->lun, resid,
985 scsi_bufflen(cp));
986
987 cp->result = DID_ERROR << 16;
988 break;
989 }
990 }
991 cp->result = DID_OK << 16 | lscsi_status;
992
993 if (lscsi_status == SAM_STAT_TASK_SET_FULL) {
994 DEBUG2(printk(KERN_INFO
995 "scsi(%ld): QUEUE FULL status detected "
996 "0x%x-0x%x.\n", ha->host_no, comp_status,
997 scsi_status));
998
999 /* Adjust queue depth for all luns on the port. */
1000 fcport->last_queue_full = jiffies;
1001 starget_for_each_device(cp->device->sdev_target,
1002 fcport, qla2x00_adjust_sdev_qdepth_down);
1003 break;
1004 }
1005 if (lscsi_status != SS_CHECK_CONDITION)
1006 break;
1007
1008 memset(cp->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
1009 if (!(scsi_status & SS_SENSE_LEN_VALID))
1010 break;
1011
1012 qla2x00_handle_sense(sp, sense_data, sense_len);
1013 break;
1014
1015 case CS_DATA_UNDERRUN:
1016 resid = resid_len;
1017 /* Use F/W calculated residual length. */
1018 if (IS_FWI2_CAPABLE(ha)) {
1019 if (scsi_status & SS_RESIDUAL_UNDER &&
1020 resid != fw_resid_len) {
1021 scsi_status &= ~SS_RESIDUAL_UNDER;
1022 lscsi_status = 0;
1023 }
1024 resid = fw_resid_len;
1025 }
1026
1027 if (scsi_status & SS_RESIDUAL_UNDER) {
1028 scsi_set_resid(cp, resid);
1029 CMD_RESID_LEN(cp) = resid;
1030 } else {
1031 DEBUG2(printk(KERN_INFO
1032 "scsi(%ld:%d:%d) UNDERRUN status detected "
1033 "0x%x-0x%x. resid=0x%x fw_resid=0x%x cdb=0x%x "
1034 "os_underflow=0x%x\n", ha->host_no,
1035 cp->device->id, cp->device->lun, comp_status,
1036 scsi_status, resid_len, resid, cp->cmnd[0],
1037 cp->underflow));
1038
1039 }
1040
1041 /*
1042 * Check to see if SCSI Status is non zero. If so report SCSI
1043 * Status.
1044 */
1045 if (lscsi_status != 0) {
1046 cp->result = DID_OK << 16 | lscsi_status;
1047
1048 if (lscsi_status == SAM_STAT_TASK_SET_FULL) {
1049 DEBUG2(printk(KERN_INFO
1050 "scsi(%ld): QUEUE FULL status detected "
1051 "0x%x-0x%x.\n", ha->host_no, comp_status,
1052 scsi_status));
1053
1054 /*
1055 * Adjust queue depth for all luns on the
1056 * port.
1057 */
1058 fcport->last_queue_full = jiffies;
1059 starget_for_each_device(
1060 cp->device->sdev_target, fcport,
1061 qla2x00_adjust_sdev_qdepth_down);
1062 break;
1063 }
1064 if (lscsi_status != SS_CHECK_CONDITION)
1065 break;
1066
1067 memset(cp->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
1068 if (!(scsi_status & SS_SENSE_LEN_VALID))
1069 break;
1070
1071 qla2x00_handle_sense(sp, sense_data, sense_len);
1072
1073 /*
1074 * In case of a Underrun condition, set both the lscsi
1075 * status and the completion status to appropriate
1076 * values.
1077 */
1078 if (resid &&
1079 ((unsigned)(scsi_bufflen(cp) - resid) <
1080 cp->underflow)) {
1081 DEBUG2(qla_printk(KERN_INFO, ha,
1082 "scsi(%ld:%d:%d:%d): Mid-layer underflow "
1083 "detected (%x of %x bytes)...returning "
1084 "error status.\n", ha->host_no,
1085 cp->device->channel, cp->device->id,
1086 cp->device->lun, resid,
1087 scsi_bufflen(cp)));
1088
1089 cp->result = DID_ERROR << 16 | lscsi_status;
1090 }
1091 } else {
1092 /*
1093 * If RISC reports underrun and target does not report
1094 * it then we must have a lost frame, so tell upper
1095 * layer to retry it by reporting a bus busy.
1096 */
1097 if (!(scsi_status & SS_RESIDUAL_UNDER)) {
1098 DEBUG2(printk("scsi(%ld:%d:%d:%d) Dropped "
1099 "frame(s) detected (%x of %x bytes)..."
1100 "retrying command.\n", ha->host_no,
1101 cp->device->channel, cp->device->id,
1102 cp->device->lun, resid,
1103 scsi_bufflen(cp)));
1104
1105 cp->result = DID_BUS_BUSY << 16;
1106 break;
1107 }
1108
1109 /* Handle mid-layer underflow */
1110 if ((unsigned)(scsi_bufflen(cp) - resid) <
1111 cp->underflow) {
1112 qla_printk(KERN_INFO, ha,
1113 "scsi(%ld:%d:%d:%d): Mid-layer underflow "
1114 "detected (%x of %x bytes)...returning "
1115 "error status.\n", ha->host_no,
1116 cp->device->channel, cp->device->id,
1117 cp->device->lun, resid,
1118 scsi_bufflen(cp));
1119
1120 cp->result = DID_ERROR << 16;
1121 break;
1122 }
1123
1124 /* Everybody online, looking good... */
1125 cp->result = DID_OK << 16;
1126 }
1127 break;
1128
1129 case CS_DATA_OVERRUN:
1130 DEBUG2(printk(KERN_INFO
1131 "scsi(%ld:%d:%d): OVERRUN status detected 0x%x-0x%x\n",
1132 ha->host_no, cp->device->id, cp->device->lun, comp_status,
1133 scsi_status));
1134 DEBUG2(printk(KERN_INFO
1135 "CDB: 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n",
1136 cp->cmnd[0], cp->cmnd[1], cp->cmnd[2], cp->cmnd[3],
1137 cp->cmnd[4], cp->cmnd[5]));
1138 DEBUG2(printk(KERN_INFO
1139 "PID=0x%lx req=0x%x xtra=0x%x -- returning DID_ERROR "
1140 "status!\n",
1141 cp->serial_number, scsi_bufflen(cp), resid_len));
1142
1143 cp->result = DID_ERROR << 16;
1144 break;
1145
1146 case CS_PORT_LOGGED_OUT:
1147 case CS_PORT_CONFIG_CHG:
1148 case CS_PORT_BUSY:
1149 case CS_INCOMPLETE:
1150 case CS_PORT_UNAVAILABLE:
1151 /*
1152 * If the port is in Target Down state, return all IOs for this
1153 * Target with DID_NO_CONNECT ELSE Queue the IOs in the
1154 * retry_queue.
1155 */
1156 DEBUG2(printk("scsi(%ld:%d:%d): status_entry: Port Down "
1157 "pid=%ld, compl status=0x%x, port state=0x%x\n",
1158 ha->host_no, cp->device->id, cp->device->lun,
1159 cp->serial_number, comp_status,
1160 atomic_read(&fcport->state)));
1161
1162 cp->result = DID_BUS_BUSY << 16;
1163 if (atomic_read(&fcport->state) == FCS_ONLINE) {
1164 qla2x00_mark_device_lost(ha, fcport, 1, 1);
1165 }
1166 break;
1167
1168 case CS_RESET:
1169 DEBUG2(printk(KERN_INFO
1170 "scsi(%ld): RESET status detected 0x%x-0x%x.\n",
1171 ha->host_no, comp_status, scsi_status));
1172
1173 cp->result = DID_RESET << 16;
1174 break;
1175
1176 case CS_ABORTED:
1177 /*
1178 * hv2.19.12 - DID_ABORT does not retry the request if we
1179 * aborted this request then abort otherwise it must be a
1180 * reset.
1181 */
1182 DEBUG2(printk(KERN_INFO
1183 "scsi(%ld): ABORT status detected 0x%x-0x%x.\n",
1184 ha->host_no, comp_status, scsi_status));
1185
1186 cp->result = DID_RESET << 16;
1187 break;
1188
1189 case CS_TIMEOUT:
1190 cp->result = DID_BUS_BUSY << 16;
1191
1192 if (IS_FWI2_CAPABLE(ha)) {
1193 DEBUG2(printk(KERN_INFO
1194 "scsi(%ld:%d:%d:%d): TIMEOUT status detected "
1195 "0x%x-0x%x\n", ha->host_no, cp->device->channel,
1196 cp->device->id, cp->device->lun, comp_status,
1197 scsi_status));
1198 break;
1199 }
1200 DEBUG2(printk(KERN_INFO
1201 "scsi(%ld:%d:%d:%d): TIMEOUT status detected 0x%x-0x%x "
1202 "sflags=%x.\n", ha->host_no, cp->device->channel,
1203 cp->device->id, cp->device->lun, comp_status, scsi_status,
1204 le16_to_cpu(sts->status_flags)));
1205
1206 /* Check to see if logout occurred. */
1207 if ((le16_to_cpu(sts->status_flags) & SF_LOGOUT_SENT))
1208 qla2x00_mark_device_lost(ha, fcport, 1, 1);
1209 break;
1210
1211 default:
1212 DEBUG3(printk("scsi(%ld): Error detected (unknown status) "
1213 "0x%x-0x%x.\n", ha->host_no, comp_status, scsi_status));
1214 qla_printk(KERN_INFO, ha,
1215 "Unknown status detected 0x%x-0x%x.\n",
1216 comp_status, scsi_status);
1217
1218 cp->result = DID_ERROR << 16;
1219 break;
1220 }
1221
1222 /* Place command on done queue. */
1223 if (ha->status_srb == NULL)
1224 qla2x00_sp_compl(ha, sp);
1225 }
1226
1227 /**
1228 * qla2x00_status_cont_entry() - Process a Status Continuations entry.
1229 * @ha: SCSI driver HA context
1230 * @pkt: Entry pointer
1231 *
1232 * Extended sense data.
1233 */
1234 static void
1235 qla2x00_status_cont_entry(scsi_qla_host_t *ha, sts_cont_entry_t *pkt)
1236 {
1237 uint8_t sense_sz = 0;
1238 srb_t *sp = ha->status_srb;
1239 struct scsi_cmnd *cp;
1240
1241 if (sp != NULL && sp->request_sense_length != 0) {
1242 cp = sp->cmd;
1243 if (cp == NULL) {
1244 DEBUG2(printk("%s(): Cmd already returned back to OS "
1245 "sp=%p.\n", __func__, sp));
1246 qla_printk(KERN_INFO, ha,
1247 "cmd is NULL: already returned to OS (sp=%p)\n",
1248 sp);
1249
1250 ha->status_srb = NULL;
1251 return;
1252 }
1253
1254 if (sp->request_sense_length > sizeof(pkt->data)) {
1255 sense_sz = sizeof(pkt->data);
1256 } else {
1257 sense_sz = sp->request_sense_length;
1258 }
1259
1260 /* Move sense data. */
1261 if (IS_FWI2_CAPABLE(ha))
1262 host_to_fcp_swap(pkt->data, sizeof(pkt->data));
1263 memcpy(sp->request_sense_ptr, pkt->data, sense_sz);
1264 DEBUG5(qla2x00_dump_buffer(sp->request_sense_ptr, sense_sz));
1265
1266 sp->request_sense_ptr += sense_sz;
1267 sp->request_sense_length -= sense_sz;
1268
1269 /* Place command on done queue. */
1270 if (sp->request_sense_length == 0) {
1271 ha->status_srb = NULL;
1272 qla2x00_sp_compl(ha, sp);
1273 }
1274 }
1275 }
1276
1277 /**
1278 * qla2x00_error_entry() - Process an error entry.
1279 * @ha: SCSI driver HA context
1280 * @pkt: Entry pointer
1281 */
1282 static void
1283 qla2x00_error_entry(scsi_qla_host_t *ha, sts_entry_t *pkt)
1284 {
1285 srb_t *sp;
1286
1287 #if defined(QL_DEBUG_LEVEL_2)
1288 if (pkt->entry_status & RF_INV_E_ORDER)
1289 qla_printk(KERN_ERR, ha, "%s: Invalid Entry Order\n", __func__);
1290 else if (pkt->entry_status & RF_INV_E_COUNT)
1291 qla_printk(KERN_ERR, ha, "%s: Invalid Entry Count\n", __func__);
1292 else if (pkt->entry_status & RF_INV_E_PARAM)
1293 qla_printk(KERN_ERR, ha,
1294 "%s: Invalid Entry Parameter\n", __func__);
1295 else if (pkt->entry_status & RF_INV_E_TYPE)
1296 qla_printk(KERN_ERR, ha, "%s: Invalid Entry Type\n", __func__);
1297 else if (pkt->entry_status & RF_BUSY)
1298 qla_printk(KERN_ERR, ha, "%s: Busy\n", __func__);
1299 else
1300 qla_printk(KERN_ERR, ha, "%s: UNKNOWN flag error\n", __func__);
1301 #endif
1302
1303 /* Validate handle. */
1304 if (pkt->handle < MAX_OUTSTANDING_COMMANDS)
1305 sp = ha->outstanding_cmds[pkt->handle];
1306 else
1307 sp = NULL;
1308
1309 if (sp) {
1310 /* Free outstanding command slot. */
1311 ha->outstanding_cmds[pkt->handle] = NULL;
1312
1313 /* Bad payload or header */
1314 if (pkt->entry_status &
1315 (RF_INV_E_ORDER | RF_INV_E_COUNT |
1316 RF_INV_E_PARAM | RF_INV_E_TYPE)) {
1317 sp->cmd->result = DID_ERROR << 16;
1318 } else if (pkt->entry_status & RF_BUSY) {
1319 sp->cmd->result = DID_BUS_BUSY << 16;
1320 } else {
1321 sp->cmd->result = DID_ERROR << 16;
1322 }
1323 qla2x00_sp_compl(ha, sp);
1324
1325 } else if (pkt->entry_type == COMMAND_A64_TYPE || pkt->entry_type ==
1326 COMMAND_TYPE || pkt->entry_type == COMMAND_TYPE_7) {
1327 DEBUG2(printk("scsi(%ld): Error entry - invalid handle\n",
1328 ha->host_no));
1329 qla_printk(KERN_WARNING, ha,
1330 "Error entry - invalid handle\n");
1331
1332 set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
1333 qla2xxx_wake_dpc(ha);
1334 }
1335 }
1336
1337 /**
1338 * qla2x00_ms_entry() - Process a Management Server entry.
1339 * @ha: SCSI driver HA context
1340 * @index: Response queue out pointer
1341 */
1342 static void
1343 qla2x00_ms_entry(scsi_qla_host_t *ha, ms_iocb_entry_t *pkt)
1344 {
1345 srb_t *sp;
1346
1347 DEBUG3(printk("%s(%ld): pkt=%p pkthandle=%d.\n",
1348 __func__, ha->host_no, pkt, pkt->handle1));
1349
1350 /* Validate handle. */
1351 if (pkt->handle1 < MAX_OUTSTANDING_COMMANDS)
1352 sp = ha->outstanding_cmds[pkt->handle1];
1353 else
1354 sp = NULL;
1355
1356 if (sp == NULL) {
1357 DEBUG2(printk("scsi(%ld): MS entry - invalid handle\n",
1358 ha->host_no));
1359 qla_printk(KERN_WARNING, ha, "MS entry - invalid handle\n");
1360
1361 set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
1362 return;
1363 }
1364
1365 CMD_COMPL_STATUS(sp->cmd) = le16_to_cpu(pkt->status);
1366 CMD_ENTRY_STATUS(sp->cmd) = pkt->entry_status;
1367
1368 /* Free outstanding command slot. */
1369 ha->outstanding_cmds[pkt->handle1] = NULL;
1370
1371 qla2x00_sp_compl(ha, sp);
1372 }
1373
1374
1375 /**
1376 * qla24xx_mbx_completion() - Process mailbox command completions.
1377 * @ha: SCSI driver HA context
1378 * @mb0: Mailbox0 register
1379 */
1380 static void
1381 qla24xx_mbx_completion(scsi_qla_host_t *ha, uint16_t mb0)
1382 {
1383 uint16_t cnt;
1384 uint16_t __iomem *wptr;
1385 struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
1386
1387 /* Load return mailbox registers. */
1388 ha->flags.mbox_int = 1;
1389 ha->mailbox_out[0] = mb0;
1390 wptr = (uint16_t __iomem *)&reg->mailbox1;
1391
1392 for (cnt = 1; cnt < ha->mbx_count; cnt++) {
1393 ha->mailbox_out[cnt] = RD_REG_WORD(wptr);
1394 wptr++;
1395 }
1396
1397 if (ha->mcp) {
1398 DEBUG3(printk("%s(%ld): Got mailbox completion. cmd=%x.\n",
1399 __func__, ha->host_no, ha->mcp->mb[0]));
1400 } else {
1401 DEBUG2_3(printk("%s(%ld): MBX pointer ERROR!\n",
1402 __func__, ha->host_no));
1403 }
1404 }
1405
1406 /**
1407 * qla24xx_process_response_queue() - Process response queue entries.
1408 * @ha: SCSI driver HA context
1409 */
1410 void
1411 qla24xx_process_response_queue(struct scsi_qla_host *ha)
1412 {
1413 struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
1414 struct sts_entry_24xx *pkt;
1415
1416 if (!ha->flags.online)
1417 return;
1418
1419 while (ha->response_ring_ptr->signature != RESPONSE_PROCESSED) {
1420 pkt = (struct sts_entry_24xx *)ha->response_ring_ptr;
1421
1422 ha->rsp_ring_index++;
1423 if (ha->rsp_ring_index == ha->response_q_length) {
1424 ha->rsp_ring_index = 0;
1425 ha->response_ring_ptr = ha->response_ring;
1426 } else {
1427 ha->response_ring_ptr++;
1428 }
1429
1430 if (pkt->entry_status != 0) {
1431 DEBUG3(printk(KERN_INFO
1432 "scsi(%ld): Process error entry.\n", ha->host_no));
1433
1434 qla2x00_error_entry(ha, (sts_entry_t *) pkt);
1435 ((response_t *)pkt)->signature = RESPONSE_PROCESSED;
1436 wmb();
1437 continue;
1438 }
1439
1440 switch (pkt->entry_type) {
1441 case STATUS_TYPE:
1442 qla2x00_status_entry(ha, pkt);
1443 break;
1444 case STATUS_CONT_TYPE:
1445 qla2x00_status_cont_entry(ha, (sts_cont_entry_t *)pkt);
1446 break;
1447 case MS_IOCB_TYPE:
1448 qla24xx_ms_entry(ha, (struct ct_entry_24xx *)pkt);
1449 break;
1450 case VP_RPT_ID_IOCB_TYPE:
1451 qla24xx_report_id_acquisition(ha,
1452 (struct vp_rpt_id_entry_24xx *)pkt);
1453 break;
1454 default:
1455 /* Type Not Supported. */
1456 DEBUG4(printk(KERN_WARNING
1457 "scsi(%ld): Received unknown response pkt type %x "
1458 "entry status=%x.\n",
1459 ha->host_no, pkt->entry_type, pkt->entry_status));
1460 break;
1461 }
1462 ((response_t *)pkt)->signature = RESPONSE_PROCESSED;
1463 wmb();
1464 }
1465
1466 /* Adjust ring index */
1467 WRT_REG_DWORD(&reg->rsp_q_out, ha->rsp_ring_index);
1468 }
1469
1470 static void
1471 qla2xxx_check_risc_status(scsi_qla_host_t *ha)
1472 {
1473 int rval;
1474 uint32_t cnt;
1475 struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
1476
1477 if (!IS_QLA25XX(ha))
1478 return;
1479
1480 rval = QLA_SUCCESS;
1481 WRT_REG_DWORD(&reg->iobase_addr, 0x7C00);
1482 RD_REG_DWORD(&reg->iobase_addr);
1483 WRT_REG_DWORD(&reg->iobase_window, 0x0001);
1484 for (cnt = 10000; (RD_REG_DWORD(&reg->iobase_window) & BIT_0) == 0 &&
1485 rval == QLA_SUCCESS; cnt--) {
1486 if (cnt) {
1487 WRT_REG_DWORD(&reg->iobase_window, 0x0001);
1488 udelay(10);
1489 } else
1490 rval = QLA_FUNCTION_TIMEOUT;
1491 }
1492 if (rval == QLA_SUCCESS)
1493 goto next_test;
1494
1495 WRT_REG_DWORD(&reg->iobase_window, 0x0003);
1496 for (cnt = 100; (RD_REG_DWORD(&reg->iobase_window) & BIT_0) == 0 &&
1497 rval == QLA_SUCCESS; cnt--) {
1498 if (cnt) {
1499 WRT_REG_DWORD(&reg->iobase_window, 0x0003);
1500 udelay(10);
1501 } else
1502 rval = QLA_FUNCTION_TIMEOUT;
1503 }
1504 if (rval != QLA_SUCCESS)
1505 goto done;
1506
1507 next_test:
1508 if (RD_REG_DWORD(&reg->iobase_c8) & BIT_3)
1509 qla_printk(KERN_INFO, ha, "Additional code -- 0x55AA.\n");
1510
1511 done:
1512 WRT_REG_DWORD(&reg->iobase_window, 0x0000);
1513 RD_REG_DWORD(&reg->iobase_window);
1514 }
1515
1516 /**
1517 * qla24xx_intr_handler() - Process interrupts for the ISP23xx and ISP63xx.
1518 * @irq:
1519 * @dev_id: SCSI driver HA context
1520 *
1521 * Called by system whenever the host adapter generates an interrupt.
1522 *
1523 * Returns handled flag.
1524 */
1525 irqreturn_t
1526 qla24xx_intr_handler(int irq, void *dev_id)
1527 {
1528 scsi_qla_host_t *ha;
1529 struct device_reg_24xx __iomem *reg;
1530 int status;
1531 unsigned long flags;
1532 unsigned long iter;
1533 uint32_t stat;
1534 uint32_t hccr;
1535 uint16_t mb[4];
1536
1537 ha = (scsi_qla_host_t *) dev_id;
1538 if (!ha) {
1539 printk(KERN_INFO
1540 "%s(): NULL host pointer\n", __func__);
1541 return IRQ_NONE;
1542 }
1543
1544 reg = &ha->iobase->isp24;
1545 status = 0;
1546
1547 spin_lock_irqsave(&ha->hardware_lock, flags);
1548 for (iter = 50; iter--; ) {
1549 stat = RD_REG_DWORD(&reg->host_status);
1550 if (stat & HSRX_RISC_PAUSED) {
1551 if (pci_channel_offline(ha->pdev))
1552 break;
1553
1554 hccr = RD_REG_DWORD(&reg->hccr);
1555
1556 qla_printk(KERN_INFO, ha, "RISC paused -- HCCR=%x, "
1557 "Dumping firmware!\n", hccr);
1558
1559 qla2xxx_check_risc_status(ha);
1560
1561 ha->isp_ops->fw_dump(ha, 1);
1562 set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
1563 break;
1564 } else if ((stat & HSRX_RISC_INT) == 0)
1565 break;
1566
1567 switch (stat & 0xff) {
1568 case 0x1:
1569 case 0x2:
1570 case 0x10:
1571 case 0x11:
1572 qla24xx_mbx_completion(ha, MSW(stat));
1573 status |= MBX_INTERRUPT;
1574
1575 break;
1576 case 0x12:
1577 mb[0] = MSW(stat);
1578 mb[1] = RD_REG_WORD(&reg->mailbox1);
1579 mb[2] = RD_REG_WORD(&reg->mailbox2);
1580 mb[3] = RD_REG_WORD(&reg->mailbox3);
1581 qla2x00_async_event(ha, mb);
1582 break;
1583 case 0x13:
1584 qla24xx_process_response_queue(ha);
1585 break;
1586 default:
1587 DEBUG2(printk("scsi(%ld): Unrecognized interrupt type "
1588 "(%d).\n",
1589 ha->host_no, stat & 0xff));
1590 break;
1591 }
1592 WRT_REG_DWORD(&reg->hccr, HCCRX_CLR_RISC_INT);
1593 RD_REG_DWORD_RELAXED(&reg->hccr);
1594 }
1595 spin_unlock_irqrestore(&ha->hardware_lock, flags);
1596
1597 if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags) &&
1598 (status & MBX_INTERRUPT) && ha->flags.mbox_int) {
1599 set_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags);
1600 complete(&ha->mbx_intr_comp);
1601 }
1602
1603 return IRQ_HANDLED;
1604 }
1605
1606 /**
1607 * qla24xx_ms_entry() - Process a Management Server entry.
1608 * @ha: SCSI driver HA context
1609 * @index: Response queue out pointer
1610 */
1611 static void
1612 qla24xx_ms_entry(scsi_qla_host_t *ha, struct ct_entry_24xx *pkt)
1613 {
1614 srb_t *sp;
1615
1616 DEBUG3(printk("%s(%ld): pkt=%p pkthandle=%d.\n",
1617 __func__, ha->host_no, pkt, pkt->handle));
1618
1619 DEBUG9(printk("%s: ct pkt dump:\n", __func__));
1620 DEBUG9(qla2x00_dump_buffer((void *)pkt, sizeof(struct ct_entry_24xx)));
1621
1622 /* Validate handle. */
1623 if (pkt->handle < MAX_OUTSTANDING_COMMANDS)
1624 sp = ha->outstanding_cmds[pkt->handle];
1625 else
1626 sp = NULL;
1627
1628 if (sp == NULL) {
1629 DEBUG2(printk("scsi(%ld): MS entry - invalid handle\n",
1630 ha->host_no));
1631 DEBUG10(printk("scsi(%ld): MS entry - invalid handle\n",
1632 ha->host_no));
1633 qla_printk(KERN_WARNING, ha, "MS entry - invalid handle %d\n",
1634 pkt->handle);
1635
1636 set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
1637 return;
1638 }
1639
1640 CMD_COMPL_STATUS(sp->cmd) = le16_to_cpu(pkt->comp_status);
1641 CMD_ENTRY_STATUS(sp->cmd) = pkt->entry_status;
1642
1643 /* Free outstanding command slot. */
1644 ha->outstanding_cmds[pkt->handle] = NULL;
1645
1646 qla2x00_sp_compl(ha, sp);
1647 }
1648
1649 static irqreturn_t
1650 qla24xx_msix_rsp_q(int irq, void *dev_id)
1651 {
1652 scsi_qla_host_t *ha;
1653 struct device_reg_24xx __iomem *reg;
1654 unsigned long flags;
1655
1656 ha = dev_id;
1657 reg = &ha->iobase->isp24;
1658
1659 spin_lock_irqsave(&ha->hardware_lock, flags);
1660
1661 qla24xx_process_response_queue(ha);
1662
1663 WRT_REG_DWORD(&reg->hccr, HCCRX_CLR_RISC_INT);
1664
1665 spin_unlock_irqrestore(&ha->hardware_lock, flags);
1666
1667 return IRQ_HANDLED;
1668 }
1669
1670 static irqreturn_t
1671 qla24xx_msix_default(int irq, void *dev_id)
1672 {
1673 scsi_qla_host_t *ha;
1674 struct device_reg_24xx __iomem *reg;
1675 int status;
1676 unsigned long flags;
1677 uint32_t stat;
1678 uint32_t hccr;
1679 uint16_t mb[4];
1680
1681 ha = dev_id;
1682 reg = &ha->iobase->isp24;
1683 status = 0;
1684
1685 spin_lock_irqsave(&ha->hardware_lock, flags);
1686 do {
1687 stat = RD_REG_DWORD(&reg->host_status);
1688 if (stat & HSRX_RISC_PAUSED) {
1689 if (pci_channel_offline(ha->pdev))
1690 break;
1691
1692 hccr = RD_REG_DWORD(&reg->hccr);
1693
1694 qla_printk(KERN_INFO, ha, "RISC paused -- HCCR=%x, "
1695 "Dumping firmware!\n", hccr);
1696
1697 qla2xxx_check_risc_status(ha);
1698
1699 ha->isp_ops->fw_dump(ha, 1);
1700 set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
1701 break;
1702 } else if ((stat & HSRX_RISC_INT) == 0)
1703 break;
1704
1705 switch (stat & 0xff) {
1706 case 0x1:
1707 case 0x2:
1708 case 0x10:
1709 case 0x11:
1710 qla24xx_mbx_completion(ha, MSW(stat));
1711 status |= MBX_INTERRUPT;
1712
1713 break;
1714 case 0x12:
1715 mb[0] = MSW(stat);
1716 mb[1] = RD_REG_WORD(&reg->mailbox1);
1717 mb[2] = RD_REG_WORD(&reg->mailbox2);
1718 mb[3] = RD_REG_WORD(&reg->mailbox3);
1719 qla2x00_async_event(ha, mb);
1720 break;
1721 case 0x13:
1722 qla24xx_process_response_queue(ha);
1723 break;
1724 default:
1725 DEBUG2(printk("scsi(%ld): Unrecognized interrupt type "
1726 "(%d).\n",
1727 ha->host_no, stat & 0xff));
1728 break;
1729 }
1730 WRT_REG_DWORD(&reg->hccr, HCCRX_CLR_RISC_INT);
1731 } while (0);
1732 spin_unlock_irqrestore(&ha->hardware_lock, flags);
1733
1734 if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags) &&
1735 (status & MBX_INTERRUPT) && ha->flags.mbox_int) {
1736 set_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags);
1737 complete(&ha->mbx_intr_comp);
1738 }
1739
1740 return IRQ_HANDLED;
1741 }
1742
1743 /* Interrupt handling helpers. */
1744
1745 struct qla_init_msix_entry {
1746 uint16_t entry;
1747 uint16_t index;
1748 const char *name;
1749 irq_handler_t handler;
1750 };
1751
1752 static struct qla_init_msix_entry imsix_entries[QLA_MSIX_ENTRIES] = {
1753 { QLA_MSIX_DEFAULT, QLA_MIDX_DEFAULT,
1754 "qla2xxx (default)", qla24xx_msix_default },
1755
1756 { QLA_MSIX_RSP_Q, QLA_MIDX_RSP_Q,
1757 "qla2xxx (rsp_q)", qla24xx_msix_rsp_q },
1758 };
1759
1760 static void
1761 qla24xx_disable_msix(scsi_qla_host_t *ha)
1762 {
1763 int i;
1764 struct qla_msix_entry *qentry;
1765
1766 for (i = 0; i < QLA_MSIX_ENTRIES; i++) {
1767 qentry = &ha->msix_entries[imsix_entries[i].index];
1768 if (qentry->have_irq)
1769 free_irq(qentry->msix_vector, ha);
1770 }
1771 pci_disable_msix(ha->pdev);
1772 }
1773
1774 static int
1775 qla24xx_enable_msix(scsi_qla_host_t *ha)
1776 {
1777 int i, ret;
1778 struct msix_entry entries[QLA_MSIX_ENTRIES];
1779 struct qla_msix_entry *qentry;
1780
1781 for (i = 0; i < QLA_MSIX_ENTRIES; i++)
1782 entries[i].entry = imsix_entries[i].entry;
1783
1784 ret = pci_enable_msix(ha->pdev, entries, ARRAY_SIZE(entries));
1785 if (ret) {
1786 qla_printk(KERN_WARNING, ha,
1787 "MSI-X: Failed to enable support -- %d/%d\n",
1788 QLA_MSIX_ENTRIES, ret);
1789 goto msix_out;
1790 }
1791 ha->flags.msix_enabled = 1;
1792
1793 for (i = 0; i < QLA_MSIX_ENTRIES; i++) {
1794 qentry = &ha->msix_entries[imsix_entries[i].index];
1795 qentry->msix_vector = entries[i].vector;
1796 qentry->msix_entry = entries[i].entry;
1797 qentry->have_irq = 0;
1798 ret = request_irq(qentry->msix_vector,
1799 imsix_entries[i].handler, 0, imsix_entries[i].name, ha);
1800 if (ret) {
1801 qla_printk(KERN_WARNING, ha,
1802 "MSI-X: Unable to register handler -- %x/%d.\n",
1803 imsix_entries[i].index, ret);
1804 qla24xx_disable_msix(ha);
1805 goto msix_out;
1806 }
1807 qentry->have_irq = 1;
1808 }
1809
1810 msix_out:
1811 return ret;
1812 }
1813
1814 int
1815 qla2x00_request_irqs(scsi_qla_host_t *ha)
1816 {
1817 int ret;
1818
1819 /* If possible, enable MSI-X. */
1820 if (!IS_QLA2432(ha) && !IS_QLA2532(ha))
1821 goto skip_msix;
1822
1823 if (IS_QLA2432(ha) && (ha->chip_revision < QLA_MSIX_CHIP_REV_24XX ||
1824 !QLA_MSIX_FW_MODE_1(ha->fw_attributes))) {
1825 DEBUG2(qla_printk(KERN_WARNING, ha,
1826 "MSI-X: Unsupported ISP2432 (0x%X, 0x%X).\n",
1827 ha->chip_revision, ha->fw_attributes));
1828
1829 goto skip_msix;
1830 }
1831
1832 if (ha->pdev->subsystem_vendor == PCI_VENDOR_ID_HP &&
1833 (ha->pdev->subsystem_device == 0x7040 ||
1834 ha->pdev->subsystem_device == 0x7041 ||
1835 ha->pdev->subsystem_device == 0x1705)) {
1836 DEBUG2(qla_printk(KERN_WARNING, ha,
1837 "MSI-X: Unsupported ISP2432 SSVID/SSDID (0x%X, 0x%X).\n",
1838 ha->pdev->subsystem_vendor,
1839 ha->pdev->subsystem_device));
1840
1841 goto skip_msi;
1842 }
1843
1844 ret = qla24xx_enable_msix(ha);
1845 if (!ret) {
1846 DEBUG2(qla_printk(KERN_INFO, ha,
1847 "MSI-X: Enabled (0x%X, 0x%X).\n", ha->chip_revision,
1848 ha->fw_attributes));
1849 return ret;
1850 }
1851 qla_printk(KERN_WARNING, ha,
1852 "MSI-X: Falling back-to INTa mode -- %d.\n", ret);
1853 skip_msix:
1854
1855 if (!IS_QLA24XX(ha) && !IS_QLA2532(ha))
1856 goto skip_msi;
1857
1858 ret = pci_enable_msi(ha->pdev);
1859 if (!ret) {
1860 DEBUG2(qla_printk(KERN_INFO, ha, "MSI: Enabled.\n"));
1861 ha->flags.msi_enabled = 1;
1862 }
1863 skip_msi:
1864
1865 ret = request_irq(ha->pdev->irq, ha->isp_ops->intr_handler,
1866 IRQF_DISABLED|IRQF_SHARED, QLA2XXX_DRIVER_NAME, ha);
1867 if (!ret) {
1868 ha->flags.inta_enabled = 1;
1869 ha->host->irq = ha->pdev->irq;
1870 } else {
1871 qla_printk(KERN_WARNING, ha,
1872 "Failed to reserve interrupt %d already in use.\n",
1873 ha->pdev->irq);
1874 }
1875
1876 return ret;
1877 }
1878
1879 void
1880 qla2x00_free_irqs(scsi_qla_host_t *ha)
1881 {
1882
1883 if (ha->flags.msix_enabled)
1884 qla24xx_disable_msix(ha);
1885 else if (ha->flags.inta_enabled) {
1886 free_irq(ha->host->irq, ha);
1887 pci_disable_msi(ha->pdev);
1888 }
1889 }
WRT350N Kernel Patches