PCI: i386: traps, change VENDOR to DEVICE
[wrt350n-kernel.git] / arch / arm / mach-at91 / at91sam9260.c
blobe47381e8aaba625e7abb5b6ff8cd0acc89ea04f5
1 /*
2 * arch/arm/mach-at91/at91sam9260.c
4 * Copyright (C) 2006 SAN People
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
13 #include <linux/module.h>
15 #include <asm/mach/arch.h>
16 #include <asm/mach/map.h>
17 #include <asm/arch/cpu.h>
18 #include <asm/arch/at91sam9260.h>
19 #include <asm/arch/at91_pmc.h>
20 #include <asm/arch/at91_rstc.h>
22 #include "generic.h"
23 #include "clock.h"
25 static struct map_desc at91sam9260_io_desc[] __initdata = {
27 .virtual = AT91_VA_BASE_SYS,
28 .pfn = __phys_to_pfn(AT91_BASE_SYS),
29 .length = SZ_16K,
30 .type = MT_DEVICE,
34 static struct map_desc at91sam9260_sram_desc[] __initdata = {
36 .virtual = AT91_IO_VIRT_BASE - AT91SAM9260_SRAM0_SIZE,
37 .pfn = __phys_to_pfn(AT91SAM9260_SRAM0_BASE),
38 .length = AT91SAM9260_SRAM0_SIZE,
39 .type = MT_DEVICE,
40 }, {
41 .virtual = AT91_IO_VIRT_BASE - AT91SAM9260_SRAM0_SIZE - AT91SAM9260_SRAM1_SIZE,
42 .pfn = __phys_to_pfn(AT91SAM9260_SRAM1_BASE),
43 .length = AT91SAM9260_SRAM1_SIZE,
44 .type = MT_DEVICE,
48 static struct map_desc at91sam9xe_sram_desc[] __initdata = {
50 .pfn = __phys_to_pfn(AT91SAM9XE_SRAM_BASE),
51 .type = MT_DEVICE,
55 /* --------------------------------------------------------------------
56 * Clocks
57 * -------------------------------------------------------------------- */
60 * The peripheral clocks.
62 static struct clk pioA_clk = {
63 .name = "pioA_clk",
64 .pmc_mask = 1 << AT91SAM9260_ID_PIOA,
65 .type = CLK_TYPE_PERIPHERAL,
67 static struct clk pioB_clk = {
68 .name = "pioB_clk",
69 .pmc_mask = 1 << AT91SAM9260_ID_PIOB,
70 .type = CLK_TYPE_PERIPHERAL,
72 static struct clk pioC_clk = {
73 .name = "pioC_clk",
74 .pmc_mask = 1 << AT91SAM9260_ID_PIOC,
75 .type = CLK_TYPE_PERIPHERAL,
77 static struct clk adc_clk = {
78 .name = "adc_clk",
79 .pmc_mask = 1 << AT91SAM9260_ID_ADC,
80 .type = CLK_TYPE_PERIPHERAL,
82 static struct clk usart0_clk = {
83 .name = "usart0_clk",
84 .pmc_mask = 1 << AT91SAM9260_ID_US0,
85 .type = CLK_TYPE_PERIPHERAL,
87 static struct clk usart1_clk = {
88 .name = "usart1_clk",
89 .pmc_mask = 1 << AT91SAM9260_ID_US1,
90 .type = CLK_TYPE_PERIPHERAL,
92 static struct clk usart2_clk = {
93 .name = "usart2_clk",
94 .pmc_mask = 1 << AT91SAM9260_ID_US2,
95 .type = CLK_TYPE_PERIPHERAL,
97 static struct clk mmc_clk = {
98 .name = "mci_clk",
99 .pmc_mask = 1 << AT91SAM9260_ID_MCI,
100 .type = CLK_TYPE_PERIPHERAL,
102 static struct clk udc_clk = {
103 .name = "udc_clk",
104 .pmc_mask = 1 << AT91SAM9260_ID_UDP,
105 .type = CLK_TYPE_PERIPHERAL,
107 static struct clk twi_clk = {
108 .name = "twi_clk",
109 .pmc_mask = 1 << AT91SAM9260_ID_TWI,
110 .type = CLK_TYPE_PERIPHERAL,
112 static struct clk spi0_clk = {
113 .name = "spi0_clk",
114 .pmc_mask = 1 << AT91SAM9260_ID_SPI0,
115 .type = CLK_TYPE_PERIPHERAL,
117 static struct clk spi1_clk = {
118 .name = "spi1_clk",
119 .pmc_mask = 1 << AT91SAM9260_ID_SPI1,
120 .type = CLK_TYPE_PERIPHERAL,
122 static struct clk ssc_clk = {
123 .name = "ssc_clk",
124 .pmc_mask = 1 << AT91SAM9260_ID_SSC,
125 .type = CLK_TYPE_PERIPHERAL,
127 static struct clk tc0_clk = {
128 .name = "tc0_clk",
129 .pmc_mask = 1 << AT91SAM9260_ID_TC0,
130 .type = CLK_TYPE_PERIPHERAL,
132 static struct clk tc1_clk = {
133 .name = "tc1_clk",
134 .pmc_mask = 1 << AT91SAM9260_ID_TC1,
135 .type = CLK_TYPE_PERIPHERAL,
137 static struct clk tc2_clk = {
138 .name = "tc2_clk",
139 .pmc_mask = 1 << AT91SAM9260_ID_TC2,
140 .type = CLK_TYPE_PERIPHERAL,
142 static struct clk ohci_clk = {
143 .name = "ohci_clk",
144 .pmc_mask = 1 << AT91SAM9260_ID_UHP,
145 .type = CLK_TYPE_PERIPHERAL,
147 static struct clk macb_clk = {
148 .name = "macb_clk",
149 .pmc_mask = 1 << AT91SAM9260_ID_EMAC,
150 .type = CLK_TYPE_PERIPHERAL,
152 static struct clk isi_clk = {
153 .name = "isi_clk",
154 .pmc_mask = 1 << AT91SAM9260_ID_ISI,
155 .type = CLK_TYPE_PERIPHERAL,
157 static struct clk usart3_clk = {
158 .name = "usart3_clk",
159 .pmc_mask = 1 << AT91SAM9260_ID_US3,
160 .type = CLK_TYPE_PERIPHERAL,
162 static struct clk usart4_clk = {
163 .name = "usart4_clk",
164 .pmc_mask = 1 << AT91SAM9260_ID_US4,
165 .type = CLK_TYPE_PERIPHERAL,
167 static struct clk usart5_clk = {
168 .name = "usart5_clk",
169 .pmc_mask = 1 << AT91SAM9260_ID_US5,
170 .type = CLK_TYPE_PERIPHERAL,
172 static struct clk tc3_clk = {
173 .name = "tc3_clk",
174 .pmc_mask = 1 << AT91SAM9260_ID_TC3,
175 .type = CLK_TYPE_PERIPHERAL,
177 static struct clk tc4_clk = {
178 .name = "tc4_clk",
179 .pmc_mask = 1 << AT91SAM9260_ID_TC4,
180 .type = CLK_TYPE_PERIPHERAL,
182 static struct clk tc5_clk = {
183 .name = "tc5_clk",
184 .pmc_mask = 1 << AT91SAM9260_ID_TC5,
185 .type = CLK_TYPE_PERIPHERAL,
188 static struct clk *periph_clocks[] __initdata = {
189 &pioA_clk,
190 &pioB_clk,
191 &pioC_clk,
192 &adc_clk,
193 &usart0_clk,
194 &usart1_clk,
195 &usart2_clk,
196 &mmc_clk,
197 &udc_clk,
198 &twi_clk,
199 &spi0_clk,
200 &spi1_clk,
201 &ssc_clk,
202 &tc0_clk,
203 &tc1_clk,
204 &tc2_clk,
205 &ohci_clk,
206 &macb_clk,
207 &isi_clk,
208 &usart3_clk,
209 &usart4_clk,
210 &usart5_clk,
211 &tc3_clk,
212 &tc4_clk,
213 &tc5_clk,
214 // irq0 .. irq2
218 * The two programmable clocks.
219 * You must configure pin multiplexing to bring these signals out.
221 static struct clk pck0 = {
222 .name = "pck0",
223 .pmc_mask = AT91_PMC_PCK0,
224 .type = CLK_TYPE_PROGRAMMABLE,
225 .id = 0,
227 static struct clk pck1 = {
228 .name = "pck1",
229 .pmc_mask = AT91_PMC_PCK1,
230 .type = CLK_TYPE_PROGRAMMABLE,
231 .id = 1,
234 static void __init at91sam9260_register_clocks(void)
236 int i;
238 for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
239 clk_register(periph_clocks[i]);
241 clk_register(&pck0);
242 clk_register(&pck1);
245 /* --------------------------------------------------------------------
246 * GPIO
247 * -------------------------------------------------------------------- */
249 static struct at91_gpio_bank at91sam9260_gpio[] = {
251 .id = AT91SAM9260_ID_PIOA,
252 .offset = AT91_PIOA,
253 .clock = &pioA_clk,
254 }, {
255 .id = AT91SAM9260_ID_PIOB,
256 .offset = AT91_PIOB,
257 .clock = &pioB_clk,
258 }, {
259 .id = AT91SAM9260_ID_PIOC,
260 .offset = AT91_PIOC,
261 .clock = &pioC_clk,
265 static void at91sam9260_reset(void)
267 at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
271 /* --------------------------------------------------------------------
272 * AT91SAM9260 processor initialization
273 * -------------------------------------------------------------------- */
275 static void __init at91sam9xe_initialize(void)
277 unsigned long cidr, sram_size;
279 cidr = at91_sys_read(AT91_DBGU_CIDR);
281 switch (cidr & AT91_CIDR_SRAMSIZ) {
282 case AT91_CIDR_SRAMSIZ_32K:
283 sram_size = 2 * SZ_16K;
284 break;
285 case AT91_CIDR_SRAMSIZ_16K:
286 default:
287 sram_size = SZ_16K;
290 at91sam9xe_sram_desc->virtual = AT91_IO_VIRT_BASE - sram_size;
291 at91sam9xe_sram_desc->length = sram_size;
293 iotable_init(at91sam9xe_sram_desc, ARRAY_SIZE(at91sam9xe_sram_desc));
296 void __init at91sam9260_initialize(unsigned long main_clock)
298 /* Map peripherals */
299 iotable_init(at91sam9260_io_desc, ARRAY_SIZE(at91sam9260_io_desc));
301 if (cpu_is_at91sam9xe())
302 at91sam9xe_initialize();
303 else
304 iotable_init(at91sam9260_sram_desc, ARRAY_SIZE(at91sam9260_sram_desc));
306 at91_arch_reset = at91sam9260_reset;
307 at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1)
308 | (1 << AT91SAM9260_ID_IRQ2);
310 /* Init clock subsystem */
311 at91_clock_init(main_clock);
313 /* Register the processor-specific clocks */
314 at91sam9260_register_clocks();
316 /* Register GPIO subsystem */
317 at91_gpio_init(at91sam9260_gpio, 3);
320 /* --------------------------------------------------------------------
321 * Interrupt initialization
322 * -------------------------------------------------------------------- */
325 * The default interrupt priority levels (0 = lowest, 7 = highest).
327 static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = {
328 7, /* Advanced Interrupt Controller */
329 7, /* System Peripherals */
330 0, /* Parallel IO Controller A */
331 0, /* Parallel IO Controller B */
332 0, /* Parallel IO Controller C */
333 0, /* Analog-to-Digital Converter */
334 6, /* USART 0 */
335 6, /* USART 1 */
336 6, /* USART 2 */
337 0, /* Multimedia Card Interface */
338 4, /* USB Device Port */
339 0, /* Two-Wire Interface */
340 6, /* Serial Peripheral Interface 0 */
341 6, /* Serial Peripheral Interface 1 */
342 5, /* Serial Synchronous Controller */
345 0, /* Timer Counter 0 */
346 0, /* Timer Counter 1 */
347 0, /* Timer Counter 2 */
348 3, /* USB Host port */
349 3, /* Ethernet */
350 0, /* Image Sensor Interface */
351 6, /* USART 3 */
352 6, /* USART 4 */
353 6, /* USART 5 */
354 0, /* Timer Counter 3 */
355 0, /* Timer Counter 4 */
356 0, /* Timer Counter 5 */
357 0, /* Advanced Interrupt Controller */
358 0, /* Advanced Interrupt Controller */
359 0, /* Advanced Interrupt Controller */
362 void __init at91sam9260_init_interrupts(unsigned int priority[NR_AIC_IRQS])
364 if (!priority)
365 priority = at91sam9260_default_irq_priority;
367 /* Initialize the AIC interrupt controller */
368 at91_aic_init(priority);
370 /* Enable GPIO interrupts */
371 at91_gpio_irq_setup();