2 * For Philips TEA5767 FM Chip used on some TV Cards like Prolink Pixelview
3 * I2C address is allways 0xC0.
6 * Copyright (c) 2005 Mauro Carvalho Chehab (mchehab@infradead.org)
7 * This code is placed under the terms of the GNU General Public License
9 * tea5767 autodetection thanks to Torsten Seeboth and Atsushi Nakagawa
10 * from their contributions on DScaler.
13 #include <linux/i2c.h>
14 #include <linux/delay.h>
15 #include <linux/videodev.h>
16 #include "tuner-i2c.h"
20 module_param(debug
, int, 0644);
21 MODULE_PARM_DESC(debug
, "enable verbose debug messages");
23 #define PREFIX "tea5767"
25 /*****************************************************************************/
28 struct tuner_i2c_props i2c_props
;
30 struct tea5767_ctrl ctrl
;
33 /*****************************************************************************/
35 /******************************
36 * Write mode register values *
37 ******************************/
40 #define TEA5767_MUTE 0x80 /* Mutes output */
41 #define TEA5767_SEARCH 0x40 /* Activates station search */
42 /* Bits 0-5 for divider MSB */
45 /* Bits 0-7 for divider LSB */
49 /* Station search from botton to up */
50 #define TEA5767_SEARCH_UP 0x80
52 /* Searches with ADC output = 10 */
53 #define TEA5767_SRCH_HIGH_LVL 0x60
55 /* Searches with ADC output = 10 */
56 #define TEA5767_SRCH_MID_LVL 0x40
58 /* Searches with ADC output = 5 */
59 #define TEA5767_SRCH_LOW_LVL 0x20
61 /* if on, div=4*(Frf+Fif)/Fref otherwise, div=4*(Frf-Fif)/Freq) */
62 #define TEA5767_HIGH_LO_INJECT 0x10
65 #define TEA5767_MONO 0x08
67 /* Disable right channel and turns to mono */
68 #define TEA5767_MUTE_RIGHT 0x04
70 /* Disable left channel and turns to mono */
71 #define TEA5767_MUTE_LEFT 0x02
73 #define TEA5767_PORT1_HIGH 0x01
76 #define TEA5767_PORT2_HIGH 0x80
77 /* Chips stops working. Only I2C bus remains on */
78 #define TEA5767_STDBY 0x40
80 /* Japan freq (76-108 MHz. If disabled, 87.5-108 MHz */
81 #define TEA5767_JAPAN_BAND 0x20
83 /* Unselected means 32.768 KHz freq as reference. Otherwise Xtal at 13 MHz */
84 #define TEA5767_XTAL_32768 0x10
86 /* Cuts weak signals */
87 #define TEA5767_SOFT_MUTE 0x08
89 /* Activates high cut control */
90 #define TEA5767_HIGH_CUT_CTRL 0x04
92 /* Activates stereo noise control */
93 #define TEA5767_ST_NOISE_CTL 0x02
95 /* If activate PORT 1 indicates SEARCH or else it is used as PORT1 */
96 #define TEA5767_SRCH_IND 0x01
100 /* By activating, it will use Xtal at 13 MHz as reference for divider */
101 #define TEA5767_PLLREF_ENABLE 0x80
103 /* By activating, deemphasis=50, or else, deemphasis of 50us */
104 #define TEA5767_DEEMPH_75 0X40
106 /*****************************
107 * Read mode register values *
108 *****************************/
111 #define TEA5767_READY_FLAG_MASK 0x80
112 #define TEA5767_BAND_LIMIT_MASK 0X40
113 /* Bits 0-5 for divider MSB after search or preset */
115 /* Second register */
116 /* Bits 0-7 for divider LSB after search or preset */
119 #define TEA5767_STEREO_MASK 0x80
120 #define TEA5767_IF_CNTR_MASK 0x7f
122 /* Fourth register */
123 #define TEA5767_ADC_LEVEL_MASK 0xf0
126 #define TEA5767_CHIP_ID_MASK 0x0f
129 /* Reserved for future extensions */
130 #define TEA5767_RESERVED_MASK 0xff
132 /*****************************************************************************/
134 static void tea5767_status_dump(struct tea5767_priv
*priv
,
135 unsigned char *buffer
)
137 unsigned int div
, frq
;
139 if (TEA5767_READY_FLAG_MASK
& buffer
[0])
140 printk(PREFIX
"Ready Flag ON\n");
142 printk(PREFIX
"Ready Flag OFF\n");
144 if (TEA5767_BAND_LIMIT_MASK
& buffer
[0])
145 printk(PREFIX
"Tuner at band limit\n");
147 printk(PREFIX
"Tuner not at band limit\n");
149 div
= ((buffer
[0] & 0x3f) << 8) | buffer
[1];
151 switch (priv
->ctrl
.xtal_freq
) {
152 case TEA5767_HIGH_LO_13MHz
:
153 frq
= (div
* 50000 - 700000 - 225000) / 4; /* Freq in KHz */
155 case TEA5767_LOW_LO_13MHz
:
156 frq
= (div
* 50000 + 700000 + 225000) / 4; /* Freq in KHz */
158 case TEA5767_LOW_LO_32768
:
159 frq
= (div
* 32768 + 700000 + 225000) / 4; /* Freq in KHz */
161 case TEA5767_HIGH_LO_32768
:
163 frq
= (div
* 32768 - 700000 - 225000) / 4; /* Freq in KHz */
166 buffer
[0] = (div
>> 8) & 0x3f;
167 buffer
[1] = div
& 0xff;
169 printk(PREFIX
"Frequency %d.%03d KHz (divider = 0x%04x)\n",
170 frq
/ 1000, frq
% 1000, div
);
172 if (TEA5767_STEREO_MASK
& buffer
[2])
173 printk(PREFIX
"Stereo\n");
175 printk(PREFIX
"Mono\n");
177 printk(PREFIX
"IF Counter = %d\n", buffer
[2] & TEA5767_IF_CNTR_MASK
);
179 printk(PREFIX
"ADC Level = %d\n",
180 (buffer
[3] & TEA5767_ADC_LEVEL_MASK
) >> 4);
182 printk(PREFIX
"Chip ID = %d\n", (buffer
[3] & TEA5767_CHIP_ID_MASK
));
184 printk(PREFIX
"Reserved = 0x%02x\n",
185 (buffer
[4] & TEA5767_RESERVED_MASK
));
188 /* Freq should be specifyed at 62.5 Hz */
189 static int set_radio_freq(struct dvb_frontend
*fe
,
190 struct analog_parameters
*params
)
192 struct tea5767_priv
*priv
= fe
->tuner_priv
;
193 unsigned int frq
= params
->frequency
;
194 unsigned char buffer
[5];
198 tuner_dbg("radio freq = %d.%03d MHz\n", frq
/16000,(frq
/16)%1000);
202 if (priv
->ctrl
.port1
)
203 buffer
[2] |= TEA5767_PORT1_HIGH
;
205 if (params
->audmode
== V4L2_TUNER_MODE_MONO
) {
206 tuner_dbg("TEA5767 set to mono\n");
207 buffer
[2] |= TEA5767_MONO
;
209 tuner_dbg("TEA5767 set to stereo\n");
215 if (priv
->ctrl
.port2
)
216 buffer
[3] |= TEA5767_PORT2_HIGH
;
218 if (priv
->ctrl
.high_cut
)
219 buffer
[3] |= TEA5767_HIGH_CUT_CTRL
;
221 if (priv
->ctrl
.st_noise
)
222 buffer
[3] |= TEA5767_ST_NOISE_CTL
;
224 if (priv
->ctrl
.soft_mute
)
225 buffer
[3] |= TEA5767_SOFT_MUTE
;
227 if (priv
->ctrl
.japan_band
)
228 buffer
[3] |= TEA5767_JAPAN_BAND
;
232 if (priv
->ctrl
.deemph_75
)
233 buffer
[4] |= TEA5767_DEEMPH_75
;
235 if (priv
->ctrl
.pllref
)
236 buffer
[4] |= TEA5767_PLLREF_ENABLE
;
239 /* Rounds freq to next decimal value - for 62.5 KHz step */
240 /* frq = 20*(frq/16)+radio_frq[frq%16]; */
242 switch (priv
->ctrl
.xtal_freq
) {
243 case TEA5767_HIGH_LO_13MHz
:
244 tuner_dbg("radio HIGH LO inject xtal @ 13 MHz\n");
245 buffer
[2] |= TEA5767_HIGH_LO_INJECT
;
246 div
= (frq
* (4000 / 16) + 700000 + 225000 + 25000) / 50000;
248 case TEA5767_LOW_LO_13MHz
:
249 tuner_dbg("radio LOW LO inject xtal @ 13 MHz\n");
251 div
= (frq
* (4000 / 16) - 700000 - 225000 + 25000) / 50000;
253 case TEA5767_LOW_LO_32768
:
254 tuner_dbg("radio LOW LO inject xtal @ 32,768 MHz\n");
255 buffer
[3] |= TEA5767_XTAL_32768
;
256 /* const 700=4000*175 Khz - to adjust freq to right value */
257 div
= ((frq
* (4000 / 16) - 700000 - 225000) + 16384) >> 15;
259 case TEA5767_HIGH_LO_32768
:
261 tuner_dbg("radio HIGH LO inject xtal @ 32,768 MHz\n");
263 buffer
[2] |= TEA5767_HIGH_LO_INJECT
;
264 buffer
[3] |= TEA5767_XTAL_32768
;
265 div
= ((frq
* (4000 / 16) + 700000 + 225000) + 16384) >> 15;
268 buffer
[0] = (div
>> 8) & 0x3f;
269 buffer
[1] = div
& 0xff;
271 if (5 != (rc
= tuner_i2c_xfer_send(&priv
->i2c_props
, buffer
, 5)))
272 tuner_warn("i2c i/o error: rc == %d (should be 5)\n", rc
);
275 if (5 != (rc
= tuner_i2c_xfer_recv(&priv
->i2c_props
, buffer
, 5)))
276 tuner_warn("i2c i/o error: rc == %d (should be 5)\n", rc
);
278 tea5767_status_dump(priv
, buffer
);
281 priv
->frequency
= frq
* 125 / 2;
286 static int tea5767_read_status(struct dvb_frontend
*fe
, char *buffer
)
288 struct tea5767_priv
*priv
= fe
->tuner_priv
;
291 memset(buffer
, 0, 5);
292 if (5 != (rc
= tuner_i2c_xfer_recv(&priv
->i2c_props
, buffer
, 5))) {
293 tuner_warn("i2c i/o error: rc == %d (should be 5)\n", rc
);
300 static inline int tea5767_signal(struct dvb_frontend
*fe
, const char *buffer
)
302 struct tea5767_priv
*priv
= fe
->tuner_priv
;
304 int signal
= ((buffer
[3] & TEA5767_ADC_LEVEL_MASK
) << 8);
306 tuner_dbg("Signal strength: %d\n", signal
);
311 static inline int tea5767_stereo(struct dvb_frontend
*fe
, const char *buffer
)
313 struct tea5767_priv
*priv
= fe
->tuner_priv
;
315 int stereo
= buffer
[2] & TEA5767_STEREO_MASK
;
317 tuner_dbg("Radio ST GET = %02x\n", stereo
);
319 return (stereo
? V4L2_TUNER_SUB_STEREO
: 0);
322 static int tea5767_get_status(struct dvb_frontend
*fe
, u32
*status
)
324 unsigned char buffer
[5];
328 if (0 == tea5767_read_status(fe
, buffer
)) {
329 if (tea5767_signal(fe
, buffer
))
330 *status
= TUNER_STATUS_LOCKED
;
331 if (tea5767_stereo(fe
, buffer
))
332 *status
|= TUNER_STATUS_STEREO
;
338 static int tea5767_get_rf_strength(struct dvb_frontend
*fe
, u16
*strength
)
340 unsigned char buffer
[5];
344 if (0 == tea5767_read_status(fe
, buffer
))
345 *strength
= tea5767_signal(fe
, buffer
);
350 static int tea5767_standby(struct dvb_frontend
*fe
)
352 unsigned char buffer
[5];
353 struct tea5767_priv
*priv
= fe
->tuner_priv
;
356 div
= (87500 * 4 + 700 + 225 + 25) / 50; /* Set frequency to 87.5 MHz */
357 buffer
[0] = (div
>> 8) & 0x3f;
358 buffer
[1] = div
& 0xff;
359 buffer
[2] = TEA5767_PORT1_HIGH
;
360 buffer
[3] = TEA5767_PORT2_HIGH
| TEA5767_HIGH_CUT_CTRL
|
361 TEA5767_ST_NOISE_CTL
| TEA5767_JAPAN_BAND
| TEA5767_STDBY
;
364 if (5 != (rc
= tuner_i2c_xfer_send(&priv
->i2c_props
, buffer
, 5)))
365 tuner_warn("i2c i/o error: rc == %d (should be 5)\n", rc
);
370 int tea5767_autodetection(struct i2c_adapter
* i2c_adap
, u8 i2c_addr
)
372 struct tuner_i2c_props i2c
= { .adap
= i2c_adap
, .addr
= i2c_addr
};
373 unsigned char buffer
[7] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
376 if ((rc
= tuner_i2c_xfer_recv(&i2c
, buffer
, 7))< 5) {
377 printk(KERN_WARNING
"It is not a TEA5767. Received %i bytes.\n", rc
);
381 /* If all bytes are the same then it's a TV tuner and not a tea5767 */
382 if (buffer
[0] == buffer
[1] && buffer
[0] == buffer
[2] &&
383 buffer
[0] == buffer
[3] && buffer
[0] == buffer
[4]) {
384 printk(KERN_WARNING
"All bytes are equal. It is not a TEA5767\n");
389 * Byte 4: bit 3:1 : CI (Chip Identification) == 0
390 * bit 0 : internally set to 0
391 * Byte 5: bit 7:0 : == 0
393 if (((buffer
[3] & 0x0f) != 0x00) || (buffer
[4] != 0x00)) {
394 printk(KERN_WARNING
"Chip ID is not zero. It is not a TEA5767\n");
398 /* It seems that tea5767 returns 0xff after the 5th byte */
399 if ((buffer
[5] != 0xff) || (buffer
[6] != 0xff)) {
400 printk(KERN_WARNING
"Returned more than 5 bytes. It is not a TEA5767\n");
407 static int tea5767_release(struct dvb_frontend
*fe
)
409 kfree(fe
->tuner_priv
);
410 fe
->tuner_priv
= NULL
;
415 static int tea5767_get_frequency(struct dvb_frontend
*fe
, u32
*frequency
)
417 struct tea5767_priv
*priv
= fe
->tuner_priv
;
418 *frequency
= priv
->frequency
;
423 static int tea5767_set_config (struct dvb_frontend
*fe
, void *priv_cfg
)
425 struct tea5767_priv
*priv
= fe
->tuner_priv
;
427 memcpy(&priv
->ctrl
, priv_cfg
, sizeof(priv
->ctrl
));
432 static struct dvb_tuner_ops tea5767_tuner_ops
= {
434 .name
= "tea5767", // Philips TEA5767HN FM Radio
437 .set_analog_params
= set_radio_freq
,
438 .set_config
= tea5767_set_config
,
439 .sleep
= tea5767_standby
,
440 .release
= tea5767_release
,
441 .get_frequency
= tea5767_get_frequency
,
442 .get_status
= tea5767_get_status
,
443 .get_rf_strength
= tea5767_get_rf_strength
,
446 struct dvb_frontend
*tea5767_attach(struct dvb_frontend
*fe
,
447 struct i2c_adapter
* i2c_adap
,
450 struct tea5767_priv
*priv
= NULL
;
452 priv
= kzalloc(sizeof(struct tea5767_priv
), GFP_KERNEL
);
455 fe
->tuner_priv
= priv
;
457 priv
->i2c_props
.addr
= i2c_addr
;
458 priv
->i2c_props
.adap
= i2c_adap
;
459 priv
->ctrl
.xtal_freq
= TEA5767_HIGH_LO_32768
;
460 priv
->ctrl
.port1
= 1;
461 priv
->ctrl
.port2
= 1;
462 priv
->ctrl
.high_cut
= 1;
463 priv
->ctrl
.st_noise
= 1;
464 priv
->ctrl
.japan_band
= 1;
466 memcpy(&fe
->ops
.tuner_ops
, &tea5767_tuner_ops
,
467 sizeof(struct dvb_tuner_ops
));
469 tuner_info("type set to %s\n", "Philips TEA5767HN FM Radio");
474 EXPORT_SYMBOL_GPL(tea5767_attach
);
475 EXPORT_SYMBOL_GPL(tea5767_autodetection
);
477 MODULE_DESCRIPTION("Philips TEA5767 FM tuner driver");
478 MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@infradead.org>");
479 MODULE_LICENSE("GPL");