drivers/pci/bus.c

   1 /*
   2  *      drivers/pci/bus.c
   3  *
   4  * From setup-res.c, by:
   5  *      Dave Rusling (david.rusling@reo.mts.dec.com)
   6  *      David Mosberger (davidm@cs.arizona.edu)
   7  *      David Miller (davem@redhat.com)
   8  *      Ivan Kokshaysky (ink@jurassic.park.msu.ru)
   9  */
  10 #include <linux/module.h>
  11 #include <linux/kernel.h>
  12 #include <linux/pci.h>
  13 #include <linux/errno.h>
  14 #include <linux/ioport.h>
  15 #include <linux/proc_fs.h>
  16 #include <linux/init.h>
  17
  18 #include "pci.h"
  19
  20 /**
  21  * pci_bus_alloc_resource - allocate a resource from a parent bus
  22  * @bus: PCI bus
  23  * @res: resource to allocate
  24  * @size: size of resource to allocate
  25  * @align: alignment of resource to allocate
  26  * @min: minimum /proc/iomem address to allocate
  27  * @type_mask: IORESOURCE_* type flags
  28  * @alignf: resource alignment function
  29  * @alignf_data: data argument for resource alignment function
  30  *
  31  * Given the PCI bus a device resides on, the size, minimum address,
  32  * alignment and type, try to find an acceptable resource allocation
  33  * for a specific device resource.
  34  */
  35 int
  36 pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res,
  37                 resource_size_t size, resource_size_t align,
  38                 resource_size_t min, unsigned int type_mask,
  39                 void (*alignf)(void *, struct resource *, resource_size_t,
  40                                 resource_size_t),
  41                 void *alignf_data)
  42 {
  43         int i, ret = -ENOMEM;
  44
  45         type_mask |= IORESOURCE_IO | IORESOURCE_MEM;
  46
  47         for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
  48                 struct resource *r = bus->resource[i];
  49                 if (!r)
  50                         continue;
  51
  52                 /* type_mask must match */
  53                 if ((res->flags ^ r->flags) & type_mask)
  54                         continue;
  55
  56                 /* We cannot allocate a non-prefetching resource
  57                    from a pre-fetching area */
  58                 if ((r->flags & IORESOURCE_PREFETCH) &&
  59                     !(res->flags & IORESOURCE_PREFETCH))
  60                         continue;
  61
  62                 /* Ok, try it out.. */
  63                 ret = allocate_resource(r, res, size,
  64                                         r->start ? : min,
  65                                         -1, align,
  66                                         alignf, alignf_data);
  67                 if (ret == 0)
  68                         break;
  69         }
  70         return ret;
  71 }
  72
  73 /**
  74  * add a single device
  75  * @dev: device to add
  76  *
  77  * This adds a single pci device to the global
  78  * device list and adds sysfs and procfs entries
  79  */
  80 int pci_bus_add_device(struct pci_dev *dev)
  81 {
  82         int retval;
  83         retval = device_add(&dev->dev);
  84         if (retval)
  85                 return retval;
  86
  87         down_write(&pci_bus_sem);
  88         list_add_tail(&dev->global_list, &pci_devices);
  89         up_write(&pci_bus_sem);
  90
  91         pci_proc_attach_device(dev);
  92         pci_create_sysfs_dev_files(dev);
  93         return 0;
  94 }
  95
  96 /**
  97  * pci_bus_add_devices - insert newly discovered PCI devices
  98  * @bus: bus to check for new devices
  99  *
 100  * Add newly discovered PCI devices (which are on the bus->devices
 101  * list) to the global PCI device list, add the sysfs and procfs
 102  * entries.  Where a bridge is found, add the discovered bus to
 103  * the parents list of child buses, and recurse (breadth-first
 104  * to be compatible with 2.4)
 105  *
 106  * Call hotplug for each new devices.
 107  */
 108 void pci_bus_add_devices(struct pci_bus *bus)
 109 {
 110         struct pci_dev *dev;
 111         struct pci_bus *child_bus;
 112         int retval;
 113
 114         list_for_each_entry(dev, &bus->devices, bus_list) {
 115                 /*
 116                  * Skip already-present devices (which are on the
 117                  * global device list.)
 118                  */
 119                 if (!list_empty(&dev->global_list))
 120                         continue;
 121                 retval = pci_bus_add_device(dev);
 122                 if (retval)
 123                         dev_err(&dev->dev, "Error adding device, continuing\n");
 124         }
 125
 126         list_for_each_entry(dev, &bus->devices, bus_list) {
 127
 128                 BUG_ON(list_empty(&dev->global_list));
 129
 130                 /*
 131                  * If there is an unattached subordinate bus, attach
 132                  * it and then scan for unattached PCI devices.
 133                  */
 134                 if (dev->subordinate) {
 135                        if (list_empty(&dev->subordinate->node)) {
 136                                down_write(&pci_bus_sem);
 137                                list_add_tail(&dev->subordinate->node,
 138                                                &dev->bus->children);
 139                                up_write(&pci_bus_sem);
 140                         }
 141                         pci_bus_add_devices(dev->subordinate);
 142
 143                         /* register the bus with sysfs as the parent is now
 144                          * properly registered. */
 145                         child_bus = dev->subordinate;
 146                         child_bus->dev.parent = child_bus->bridge;
 147                         retval = device_register(&child_bus->dev);
 148                         if (!retval)
 149                                 retval = device_create_file(&child_bus->dev,
 150                                                         &dev_attr_cpuaffinity);
 151                         if (retval)
 152                                 dev_err(&dev->dev, "Error registering pci_bus"
 153                                         " device bridge symlink,"
 154                                         " continuing...\n");
 155                 }
 156         }
 157 }
 158
 159 void pci_enable_bridges(struct pci_bus *bus)
 160 {
 161         struct pci_dev *dev;
 162         int retval;
 163
 164         list_for_each_entry(dev, &bus->devices, bus_list) {
 165                 if (dev->subordinate) {
 166                         retval = pci_enable_device(dev);
 167                         pci_set_master(dev);
 168                         pci_enable_bridges(dev->subordinate);
 169                 }
 170         }
 171 }
 172
 173 /** pci_walk_bus - walk devices on/under bus, calling callback.
 174  *  @top      bus whose devices should be walked
 175  *  @cb       callback to be called for each device found
 176  *  @userdata arbitrary pointer to be passed to callback.
 177  *
 178  *  Walk the given bus, including any bridged devices
 179  *  on buses under this bus.  Call the provided callback
 180  *  on each device found.
 181  */
 182 void pci_walk_bus(struct pci_bus *top, void (*cb)(struct pci_dev *, void *),
 183                   void *userdata)
 184 {
 185         struct pci_dev *dev;
 186         struct pci_bus *bus;
 187         struct list_head *next;
 188
 189         bus = top;
 190         down_read(&pci_bus_sem);
 191         next = top->devices.next;
 192         for (;;) {
 193                 if (next == &bus->devices) {
 194                         /* end of this bus, go up or finish */
 195                         if (bus == top)
 196                                 break;
 197                         next = bus->self->bus_list.next;
 198                         bus = bus->self->bus;
 199                         continue;
 200                 }
 201                 dev = list_entry(next, struct pci_dev, bus_list);
 202                 if (dev->subordinate) {
 203                         /* this is a pci-pci bridge, do its devices next */
 204                         next = dev->subordinate->devices.next;
 205                         bus = dev->subordinate;
 206                 } else
 207                         next = dev->bus_list.next;
 208
 209                 /* Run device routines with the device locked */
 210                 down(&dev->dev.sem);
 211                 cb(dev, userdata);
 212                 up(&dev->dev.sem);
 213         }
 214         up_read(&pci_bus_sem);
 215 }
 216
 217 EXPORT_SYMBOL(pci_bus_alloc_resource);
 218 EXPORT_SYMBOL_GPL(pci_bus_add_device);
 219 EXPORT_SYMBOL(pci_bus_add_devices);
 220 EXPORT_SYMBOL(pci_enable_bridges);