?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
[NETFILTER]: Spelling fixes
[wrt350n-kernel.git] / drivers / char / synclinkmp.c
blobc63013b2fc366487a781b925e7738175e7ccee7a
1 /*
2 * $Id: synclinkmp.c,v 4.38 2005/07/15 13:29:44 paulkf Exp $
3 *
4 * Device driver for Microgate SyncLink Multiport
5 * high speed multiprotocol serial adapter.
6 *
7 * written by Paul Fulghum for Microgate Corporation
8 * paulkf@microgate.com
9 *
10 * Microgate and SyncLink are trademarks of Microgate Corporation
11 *
12 * Derived from serial.c written by Theodore Ts'o and Linus Torvalds
13 * This code is released under the GNU General Public License (GPL)
14 *
15 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
16 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
17 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
18 * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
19 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
20 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
21 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
23 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
24 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
25 * OF THE POSSIBILITY OF SUCH DAMAGE.
26 */
27
28 #define VERSION(ver,rel,seq) (((ver)<<16) | ((rel)<<8) | (seq))
29 #if defined(__i386__)
30 # define BREAKPOINT() asm(" int $3");
31 #else
32 # define BREAKPOINT() { }
33 #endif
34
35 #define MAX_DEVICES 12
36
37 #include <linux/module.h>
38 #include <linux/errno.h>
39 #include <linux/signal.h>
40 #include <linux/sched.h>
41 #include <linux/timer.h>
42 #include <linux/interrupt.h>
43 #include <linux/pci.h>
44 #include <linux/tty.h>
45 #include <linux/tty_flip.h>
46 #include <linux/serial.h>
47 #include <linux/major.h>
48 #include <linux/string.h>
49 #include <linux/fcntl.h>
50 #include <linux/ptrace.h>
51 #include <linux/ioport.h>
52 #include <linux/mm.h>
53 #include <linux/slab.h>
54 #include <linux/netdevice.h>
55 #include <linux/vmalloc.h>
56 #include <linux/init.h>
57 #include <linux/delay.h>
58 #include <linux/ioctl.h>
59
60 #include <asm/system.h>
61 #include <asm/io.h>
62 #include <asm/irq.h>
63 #include <asm/dma.h>
64 #include <linux/bitops.h>
65 #include <asm/types.h>
66 #include <linux/termios.h>
67 #include <linux/workqueue.h>
68 #include <linux/hdlc.h>
69
70 #if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINKMP_MODULE))
71 #define SYNCLINK_GENERIC_HDLC 1
72 #else
73 #define SYNCLINK_GENERIC_HDLC 0
74 #endif
75
76 #define GET_USER(error,value,addr) error = get_user(value,addr)
77 #define COPY_FROM_USER(error,dest,src,size) error = copy_from_user(dest,src,size) ? -EFAULT : 0
78 #define PUT_USER(error,value,addr) error = put_user(value,addr)
79 #define COPY_TO_USER(error,dest,src,size) error = copy_to_user(dest,src,size) ? -EFAULT : 0
80
81 #include <asm/uaccess.h>
82
83 #include "linux/synclink.h"
84
85 static MGSL_PARAMS default_params = {
86 MGSL_MODE_HDLC, /* unsigned long mode */
87 0, /* unsigned char loopback; */
88 HDLC_FLAG_UNDERRUN_ABORT15, /* unsigned short flags; */
89 HDLC_ENCODING_NRZI_SPACE, /* unsigned char encoding; */
90 0, /* unsigned long clock_speed; */
91 0xff, /* unsigned char addr_filter; */
92 HDLC_CRC_16_CCITT, /* unsigned short crc_type; */
93 HDLC_PREAMBLE_LENGTH_8BITS, /* unsigned char preamble_length; */
94 HDLC_PREAMBLE_PATTERN_NONE, /* unsigned char preamble; */
95 9600, /* unsigned long data_rate; */
96 8, /* unsigned char data_bits; */
97 1, /* unsigned char stop_bits; */
98 ASYNC_PARITY_NONE /* unsigned char parity; */
99 };
100
101 /* size in bytes of DMA data buffers */
102 #define SCABUFSIZE 1024
103 #define SCA_MEM_SIZE 0x40000
104 #define SCA_BASE_SIZE 512
105 #define SCA_REG_SIZE 16
106 #define SCA_MAX_PORTS 4
107 #define SCAMAXDESC 128
108
109 #define BUFFERLISTSIZE 4096
110
111 /* SCA-I style DMA buffer descriptor */
112 typedef struct _SCADESC
113 {
114 u16 next; /* lower l6 bits of next descriptor addr */
115 u16 buf_ptr; /* lower 16 bits of buffer addr */
116 u8 buf_base; /* upper 8 bits of buffer addr */
117 u8 pad1;
118 u16 length; /* length of buffer */
119 u8 status; /* status of buffer */
120 u8 pad2;
121 } SCADESC, *PSCADESC;
122
123 typedef struct _SCADESC_EX
124 {
125 /* device driver bookkeeping section */
126 char *virt_addr; /* virtual address of data buffer */
127 u16 phys_entry; /* lower 16-bits of physical address of this descriptor */
128 } SCADESC_EX, *PSCADESC_EX;
129
130 /* The queue of BH actions to be performed */
131
132 #define BH_RECEIVE 1
133 #define BH_TRANSMIT 2
134 #define BH_STATUS 4
135
136 #define IO_PIN_SHUTDOWN_LIMIT 100
137
138 struct _input_signal_events {
139 int ri_up;
140 int ri_down;
141 int dsr_up;
142 int dsr_down;
143 int dcd_up;
144 int dcd_down;
145 int cts_up;
146 int cts_down;
147 };
148
149 /*
150 * Device instance data structure
151 */
152 typedef struct _synclinkmp_info {
153 void *if_ptr; /* General purpose pointer (used by SPPP) */
154 int magic;
155 int flags;
156 int count; /* count of opens */
157 int line;
158 unsigned short close_delay;
159 unsigned short closing_wait; /* time to wait before closing */
160
161 struct mgsl_icount icount;
162
163 struct tty_struct *tty;
164 int timeout;
165 int x_char; /* xon/xoff character */
166 int blocked_open; /* # of blocked opens */
167 u16 read_status_mask1; /* break detection (SR1 indications) */
168 u16 read_status_mask2; /* parity/framing/overun (SR2 indications) */
169 unsigned char ignore_status_mask1; /* break detection (SR1 indications) */
170 unsigned char ignore_status_mask2; /* parity/framing/overun (SR2 indications) */
171 unsigned char *tx_buf;
172 int tx_put;
173 int tx_get;
174 int tx_count;
175
176 wait_queue_head_t open_wait;
177 wait_queue_head_t close_wait;
178
179 wait_queue_head_t status_event_wait_q;
180 wait_queue_head_t event_wait_q;
181 struct timer_list tx_timer; /* HDLC transmit timeout timer */
182 struct _synclinkmp_info *next_device; /* device list link */
183 struct timer_list status_timer; /* input signal status check timer */
184
185 spinlock_t lock; /* spinlock for synchronizing with ISR */
186 struct work_struct task; /* task structure for scheduling bh */
187
188 u32 max_frame_size; /* as set by device config */
189
190 u32 pending_bh;
191
192 int bh_running; /* Protection from multiple */
193 int isr_overflow;
194 int bh_requested;
195
196 int dcd_chkcount; /* check counts to prevent */
197 int cts_chkcount; /* too many IRQs if a signal */
198 int dsr_chkcount; /* is floating */
199 int ri_chkcount;
200
201 char *buffer_list; /* virtual address of Rx & Tx buffer lists */
202 unsigned long buffer_list_phys;
203
204 unsigned int rx_buf_count; /* count of total allocated Rx buffers */
205 SCADESC *rx_buf_list; /* list of receive buffer entries */
206 SCADESC_EX rx_buf_list_ex[SCAMAXDESC]; /* list of receive buffer entries */
207 unsigned int current_rx_buf;
208
209 unsigned int tx_buf_count; /* count of total allocated Tx buffers */
210 SCADESC *tx_buf_list; /* list of transmit buffer entries */
211 SCADESC_EX tx_buf_list_ex[SCAMAXDESC]; /* list of transmit buffer entries */
212 unsigned int last_tx_buf;
213
214 unsigned char *tmp_rx_buf;
215 unsigned int tmp_rx_buf_count;
216
217 int rx_enabled;
218 int rx_overflow;
219
220 int tx_enabled;
221 int tx_active;
222 u32 idle_mode;
223
224 unsigned char ie0_value;
225 unsigned char ie1_value;
226 unsigned char ie2_value;
227 unsigned char ctrlreg_value;
228 unsigned char old_signals;
229
230 char device_name[25]; /* device instance name */
231
232 int port_count;
233 int adapter_num;
234 int port_num;
235
236 struct _synclinkmp_info *port_array[SCA_MAX_PORTS];
237
238 unsigned int bus_type; /* expansion bus type (ISA,EISA,PCI) */
239
240 unsigned int irq_level; /* interrupt level */
241 unsigned long irq_flags;
242 int irq_requested; /* nonzero if IRQ requested */
243
244 MGSL_PARAMS params; /* communications parameters */
245
246 unsigned char serial_signals; /* current serial signal states */
247
248 int irq_occurred; /* for diagnostics use */
249 unsigned int init_error; /* Initialization startup error */
250
251 u32 last_mem_alloc;
252 unsigned char* memory_base; /* shared memory address (PCI only) */
253 u32 phys_memory_base;
254 int shared_mem_requested;
255
256 unsigned char* sca_base; /* HD64570 SCA Memory address */
257 u32 phys_sca_base;
258 u32 sca_offset;
259 int sca_base_requested;
260
261 unsigned char* lcr_base; /* local config registers (PCI only) */
262 u32 phys_lcr_base;
263 u32 lcr_offset;
264 int lcr_mem_requested;
265
266 unsigned char* statctrl_base; /* status/control register memory */
267 u32 phys_statctrl_base;
268 u32 statctrl_offset;
269 int sca_statctrl_requested;
270
271 u32 misc_ctrl_value;
272 char flag_buf[MAX_ASYNC_BUFFER_SIZE];
273 char char_buf[MAX_ASYNC_BUFFER_SIZE];
274 BOOLEAN drop_rts_on_tx_done;
275
276 struct _input_signal_events input_signal_events;
277
278 /* SPPP/Cisco HDLC device parts */
279 int netcount;
280 int dosyncppp;
281 spinlock_t netlock;
282
283 #if SYNCLINK_GENERIC_HDLC
284 struct net_device *netdev;
285 #endif
286
287 } SLMP_INFO;
288
289 #define MGSL_MAGIC 0x5401
290
291 /*
292 * define serial signal status change macros
293 */
294 #define MISCSTATUS_DCD_LATCHED (SerialSignal_DCD<<8) /* indicates change in DCD */
295 #define MISCSTATUS_RI_LATCHED (SerialSignal_RI<<8) /* indicates change in RI */
296 #define MISCSTATUS_CTS_LATCHED (SerialSignal_CTS<<8) /* indicates change in CTS */
297 #define MISCSTATUS_DSR_LATCHED (SerialSignal_DSR<<8) /* change in DSR */
298
299 /* Common Register macros */
300 #define LPR 0x00
301 #define PABR0 0x02
302 #define PABR1 0x03
303 #define WCRL 0x04
304 #define WCRM 0x05
305 #define WCRH 0x06
306 #define DPCR 0x08
307 #define DMER 0x09
308 #define ISR0 0x10
309 #define ISR1 0x11
310 #define ISR2 0x12
311 #define IER0 0x14
312 #define IER1 0x15
313 #define IER2 0x16
314 #define ITCR 0x18
315 #define INTVR 0x1a
316 #define IMVR 0x1c
317
318 /* MSCI Register macros */
319 #define TRB 0x20
320 #define TRBL 0x20
321 #define TRBH 0x21
322 #define SR0 0x22
323 #define SR1 0x23
324 #define SR2 0x24
325 #define SR3 0x25
326 #define FST 0x26
327 #define IE0 0x28
328 #define IE1 0x29
329 #define IE2 0x2a
330 #define FIE 0x2b
331 #define CMD 0x2c
332 #define MD0 0x2e
333 #define MD1 0x2f
334 #define MD2 0x30
335 #define CTL 0x31
336 #define SA0 0x32
337 #define SA1 0x33
338 #define IDL 0x34
339 #define TMC 0x35
340 #define RXS 0x36
341 #define TXS 0x37
342 #define TRC0 0x38
343 #define TRC1 0x39
344 #define RRC 0x3a
345 #define CST0 0x3c
346 #define CST1 0x3d
347
348 /* Timer Register Macros */
349 #define TCNT 0x60
350 #define TCNTL 0x60
351 #define TCNTH 0x61
352 #define TCONR 0x62
353 #define TCONRL 0x62
354 #define TCONRH 0x63
355 #define TMCS 0x64
356 #define TEPR 0x65
357
358 /* DMA Controller Register macros */
359 #define DARL 0x80
360 #define DARH 0x81
361 #define DARB 0x82
362 #define BAR 0x80
363 #define BARL 0x80
364 #define BARH 0x81
365 #define BARB 0x82
366 #define SAR 0x84
367 #define SARL 0x84
368 #define SARH 0x85
369 #define SARB 0x86
370 #define CPB 0x86
371 #define CDA 0x88
372 #define CDAL 0x88
373 #define CDAH 0x89
374 #define EDA 0x8a
375 #define EDAL 0x8a
376 #define EDAH 0x8b
377 #define BFL 0x8c
378 #define BFLL 0x8c
379 #define BFLH 0x8d
380 #define BCR 0x8e
381 #define BCRL 0x8e
382 #define BCRH 0x8f
383 #define DSR 0x90
384 #define DMR 0x91
385 #define FCT 0x93
386 #define DIR 0x94
387 #define DCMD 0x95
388
389 /* combine with timer or DMA register address */
390 #define TIMER0 0x00
391 #define TIMER1 0x08
392 #define TIMER2 0x10
393 #define TIMER3 0x18
394 #define RXDMA 0x00
395 #define TXDMA 0x20
396
397 /* SCA Command Codes */
398 #define NOOP 0x00
399 #define TXRESET 0x01
400 #define TXENABLE 0x02
401 #define TXDISABLE 0x03
402 #define TXCRCINIT 0x04
403 #define TXCRCEXCL 0x05
404 #define TXEOM 0x06
405 #define TXABORT 0x07
406 #define MPON 0x08
407 #define TXBUFCLR 0x09
408 #define RXRESET 0x11
409 #define RXENABLE 0x12
410 #define RXDISABLE 0x13
411 #define RXCRCINIT 0x14
412 #define RXREJECT 0x15
413 #define SEARCHMP 0x16
414 #define RXCRCEXCL 0x17
415 #define RXCRCCALC 0x18
416 #define CHRESET 0x21
417 #define HUNT 0x31
418
419 /* DMA command codes */
420 #define SWABORT 0x01
421 #define FEICLEAR 0x02
422
423 /* IE0 */
424 #define TXINTE BIT7
425 #define RXINTE BIT6
426 #define TXRDYE BIT1
427 #define RXRDYE BIT0
428
429 /* IE1 & SR1 */
430 #define UDRN BIT7
431 #define IDLE BIT6
432 #define SYNCD BIT4
433 #define FLGD BIT4
434 #define CCTS BIT3
435 #define CDCD BIT2
436 #define BRKD BIT1
437 #define ABTD BIT1
438 #define GAPD BIT1
439 #define BRKE BIT0
440 #define IDLD BIT0
441
442 /* IE2 & SR2 */
443 #define EOM BIT7
444 #define PMP BIT6
445 #define SHRT BIT6
446 #define PE BIT5
447 #define ABT BIT5
448 #define FRME BIT4
449 #define RBIT BIT4
450 #define OVRN BIT3
451 #define CRCE BIT2
452
453
454 /*
455 * Global linked list of SyncLink devices
456 */
457 static SLMP_INFO *synclinkmp_device_list = NULL;
458 static int synclinkmp_adapter_count = -1;
459 static int synclinkmp_device_count = 0;
460
461 /*
462 * Set this param to non-zero to load eax with the
463 * .text section address and breakpoint on module load.
464 * This is useful for use with gdb and add-symbol-file command.
465 */
466 static int break_on_load=0;
467
468 /*
469 * Driver major number, defaults to zero to get auto
470 * assigned major number. May be forced as module parameter.
471 */
472 static int ttymajor=0;
473
474 /*
475 * Array of user specified options for ISA adapters.
476 */
477 static int debug_level = 0;
478 static int maxframe[MAX_DEVICES] = {0,};
479 static int dosyncppp[MAX_DEVICES] = {0,};
480
481 module_param(break_on_load, bool, 0);
482 module_param(ttymajor, int, 0);
483 module_param(debug_level, int, 0);
484 module_param_array(maxframe, int, NULL, 0);
485 module_param_array(dosyncppp, int, NULL, 0);
486
487 static char *driver_name = "SyncLink MultiPort driver";
488 static char *driver_version = "$Revision: 4.38 $";
489
490 static int synclinkmp_init_one(struct pci_dev *dev,const struct pci_device_id *ent);
491 static void synclinkmp_remove_one(struct pci_dev *dev);
492
493 static struct pci_device_id synclinkmp_pci_tbl[] = {
494 { PCI_VENDOR_ID_MICROGATE, PCI_DEVICE_ID_MICROGATE_SCA, PCI_ANY_ID, PCI_ANY_ID, },
495 { 0, }, /* terminate list */
496 };
497 MODULE_DEVICE_TABLE(pci, synclinkmp_pci_tbl);
498
499 MODULE_LICENSE("GPL");
500
501 static struct pci_driver synclinkmp_pci_driver = {
502 .name = "synclinkmp",
503 .id_table = synclinkmp_pci_tbl,
504 .probe = synclinkmp_init_one,
505 .remove = __devexit_p(synclinkmp_remove_one),
506 };
507
508
509 static struct tty_driver *serial_driver;
510
511 /* number of characters left in xmit buffer before we ask for more */
512 #define WAKEUP_CHARS 256
513
514
515 /* tty callbacks */
516
517 static int open(struct tty_struct *tty, struct file * filp);
518 static void close(struct tty_struct *tty, struct file * filp);
519 static void hangup(struct tty_struct *tty);
520 static void set_termios(struct tty_struct *tty, struct ktermios *old_termios);
521
522 static int write(struct tty_struct *tty, const unsigned char *buf, int count);
523 static void put_char(struct tty_struct *tty, unsigned char ch);
524 static void send_xchar(struct tty_struct *tty, char ch);
525 static void wait_until_sent(struct tty_struct *tty, int timeout);
526 static int write_room(struct tty_struct *tty);
527 static void flush_chars(struct tty_struct *tty);
528 static void flush_buffer(struct tty_struct *tty);
529 static void tx_hold(struct tty_struct *tty);
530 static void tx_release(struct tty_struct *tty);
531
532 static int ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg);
533 static int read_proc(char *page, char **start, off_t off, int count,int *eof, void *data);
534 static int chars_in_buffer(struct tty_struct *tty);
535 static void throttle(struct tty_struct * tty);
536 static void unthrottle(struct tty_struct * tty);
537 static void set_break(struct tty_struct *tty, int break_state);
538
539 #if SYNCLINK_GENERIC_HDLC
540 #define dev_to_port(D) (dev_to_hdlc(D)->priv)
541 static void hdlcdev_tx_done(SLMP_INFO *info);
542 static void hdlcdev_rx(SLMP_INFO *info, char *buf, int size);
543 static int hdlcdev_init(SLMP_INFO *info);
544 static void hdlcdev_exit(SLMP_INFO *info);
545 #endif
546
547 /* ioctl handlers */
548
549 static int get_stats(SLMP_INFO *info, struct mgsl_icount __user *user_icount);
550 static int get_params(SLMP_INFO *info, MGSL_PARAMS __user *params);
551 static int set_params(SLMP_INFO *info, MGSL_PARAMS __user *params);
552 static int get_txidle(SLMP_INFO *info, int __user *idle_mode);
553 static int set_txidle(SLMP_INFO *info, int idle_mode);
554 static int tx_enable(SLMP_INFO *info, int enable);
555 static int tx_abort(SLMP_INFO *info);
556 static int rx_enable(SLMP_INFO *info, int enable);
557 static int modem_input_wait(SLMP_INFO *info,int arg);
558 static int wait_mgsl_event(SLMP_INFO *info, int __user *mask_ptr);
559 static int tiocmget(struct tty_struct *tty, struct file *file);
560 static int tiocmset(struct tty_struct *tty, struct file *file,
561 unsigned int set, unsigned int clear);
562 static void set_break(struct tty_struct *tty, int break_state);
563
564 static void add_device(SLMP_INFO *info);
565 static void device_init(int adapter_num, struct pci_dev *pdev);
566 static int claim_resources(SLMP_INFO *info);
567 static void release_resources(SLMP_INFO *info);
568
569 static int startup(SLMP_INFO *info);
570 static int block_til_ready(struct tty_struct *tty, struct file * filp,SLMP_INFO *info);
571 static void shutdown(SLMP_INFO *info);
572 static void program_hw(SLMP_INFO *info);
573 static void change_params(SLMP_INFO *info);
574
575 static int init_adapter(SLMP_INFO *info);
576 static int register_test(SLMP_INFO *info);
577 static int irq_test(SLMP_INFO *info);
578 static int loopback_test(SLMP_INFO *info);
579 static int adapter_test(SLMP_INFO *info);
580 static int memory_test(SLMP_INFO *info);
581
582 static void reset_adapter(SLMP_INFO *info);
583 static void reset_port(SLMP_INFO *info);
584 static void async_mode(SLMP_INFO *info);
585 static void hdlc_mode(SLMP_INFO *info);
586
587 static void rx_stop(SLMP_INFO *info);
588 static void rx_start(SLMP_INFO *info);
589 static void rx_reset_buffers(SLMP_INFO *info);
590 static void rx_free_frame_buffers(SLMP_INFO *info, unsigned int first, unsigned int last);
591 static int rx_get_frame(SLMP_INFO *info);
592
593 static void tx_start(SLMP_INFO *info);
594 static void tx_stop(SLMP_INFO *info);
595 static void tx_load_fifo(SLMP_INFO *info);
596 static void tx_set_idle(SLMP_INFO *info);
597 static void tx_load_dma_buffer(SLMP_INFO *info, const char *buf, unsigned int count);
598
599 static void get_signals(SLMP_INFO *info);
600 static void set_signals(SLMP_INFO *info);
601 static void enable_loopback(SLMP_INFO *info, int enable);
602 static void set_rate(SLMP_INFO *info, u32 data_rate);
603
604 static int bh_action(SLMP_INFO *info);
605 static void bh_handler(struct work_struct *work);
606 static void bh_receive(SLMP_INFO *info);
607 static void bh_transmit(SLMP_INFO *info);
608 static void bh_status(SLMP_INFO *info);
609 static void isr_timer(SLMP_INFO *info);
610 static void isr_rxint(SLMP_INFO *info);
611 static void isr_rxrdy(SLMP_INFO *info);
612 static void isr_txint(SLMP_INFO *info);
613 static void isr_txrdy(SLMP_INFO *info);
614 static void isr_rxdmaok(SLMP_INFO *info);
615 static void isr_rxdmaerror(SLMP_INFO *info);
616 static void isr_txdmaok(SLMP_INFO *info);
617 static void isr_txdmaerror(SLMP_INFO *info);
618 static void isr_io_pin(SLMP_INFO *info, u16 status);
619
620 static int alloc_dma_bufs(SLMP_INFO *info);
621 static void free_dma_bufs(SLMP_INFO *info);
622 static int alloc_buf_list(SLMP_INFO *info);
623 static int alloc_frame_bufs(SLMP_INFO *info, SCADESC *list, SCADESC_EX *list_ex,int count);
624 static int alloc_tmp_rx_buf(SLMP_INFO *info);
625 static void free_tmp_rx_buf(SLMP_INFO *info);
626
627 static void load_pci_memory(SLMP_INFO *info, char* dest, const char* src, unsigned short count);
628 static void trace_block(SLMP_INFO *info, const char* data, int count, int xmit);
629 static void tx_timeout(unsigned long context);
630 static void status_timeout(unsigned long context);
631
632 static unsigned char read_reg(SLMP_INFO *info, unsigned char addr);
633 static void write_reg(SLMP_INFO *info, unsigned char addr, unsigned char val);
634 static u16 read_reg16(SLMP_INFO *info, unsigned char addr);
635 static void write_reg16(SLMP_INFO *info, unsigned char addr, u16 val);
636 static unsigned char read_status_reg(SLMP_INFO * info);
637 static void write_control_reg(SLMP_INFO * info);
638
639
640 static unsigned char rx_active_fifo_level = 16; // rx request FIFO activation level in bytes
641 static unsigned char tx_active_fifo_level = 16; // tx request FIFO activation level in bytes
642 static unsigned char tx_negate_fifo_level = 32; // tx request FIFO negation level in bytes
643
644 static u32 misc_ctrl_value = 0x007e4040;
645 static u32 lcr1_brdr_value = 0x00800028;
646
647 static u32 read_ahead_count = 8;
648
649 /* DPCR, DMA Priority Control
650 *
651 * 07..05 Not used, must be 0
652 * 04 BRC, bus release condition: 0=all transfers complete
653 * 1=release after 1 xfer on all channels
654 * 03 CCC, channel change condition: 0=every cycle
655 * 1=after each channel completes all xfers
656 * 02..00 PR<2..0>, priority 100=round robin
657 *
658 * 00000100 = 0x00
659 */
660 static unsigned char dma_priority = 0x04;
661
662 // Number of bytes that can be written to shared RAM
663 // in a single write operation
664 static u32 sca_pci_load_interval = 64;
665
666 /*
667 * 1st function defined in .text section. Calling this function in
668 * init_module() followed by a breakpoint allows a remote debugger
669 * (gdb) to get the .text address for the add-symbol-file command.
670 * This allows remote debugging of dynamically loadable modules.
671 */
672 static void* synclinkmp_get_text_ptr(void);
673 static void* synclinkmp_get_text_ptr(void) {return synclinkmp_get_text_ptr;}
674
675 static inline int sanity_check(SLMP_INFO *info,
676 char *name, const char *routine)
677 {
678 #ifdef SANITY_CHECK
679 static const char *badmagic =
680 "Warning: bad magic number for synclinkmp_struct (%s) in %s\n";
681 static const char *badinfo =
682 "Warning: null synclinkmp_struct for (%s) in %s\n";
683
684 if (!info) {
685 printk(badinfo, name, routine);
686 return 1;
687 }
688 if (info->magic != MGSL_MAGIC) {
689 printk(badmagic, name, routine);
690 return 1;
691 }
692 #else
693 if (!info)
694 return 1;
695 #endif
696 return 0;
697 }
698
699 /**
700 * line discipline callback wrappers
701 *
702 * The wrappers maintain line discipline references
703 * while calling into the line discipline.
704 *
705 * ldisc_receive_buf - pass receive data to line discipline
706 */
707
708 static void ldisc_receive_buf(struct tty_struct *tty,
709 const __u8 *data, char *flags, int count)
710 {
711 struct tty_ldisc *ld;
712 if (!tty)
713 return;
714 ld = tty_ldisc_ref(tty);
715 if (ld) {
716 if (ld->receive_buf)
717 ld->receive_buf(tty, data, flags, count);
718 tty_ldisc_deref(ld);
719 }
720 }
721
722 /* tty callbacks */
723
724 /* Called when a port is opened. Init and enable port.
725 */
726 static int open(struct tty_struct *tty, struct file *filp)
727 {
728 SLMP_INFO *info;
729 int retval, line;
730 unsigned long flags;
731
732 line = tty->index;
733 if ((line < 0) || (line >= synclinkmp_device_count)) {
734 printk("%s(%d): open with invalid line #%d.\n",
735 __FILE__,__LINE__,line);
736 return -ENODEV;
737 }
738
739 info = synclinkmp_device_list;
740 while(info && info->line != line)
741 info = info->next_device;
742 if (sanity_check(info, tty->name, "open"))
743 return -ENODEV;
744 if ( info->init_error ) {
745 printk("%s(%d):%s device is not allocated, init error=%d\n",
746 __FILE__,__LINE__,info->device_name,info->init_error);
747 return -ENODEV;
748 }
749
750 tty->driver_data = info;
751 info->tty = tty;
752
753 if (debug_level >= DEBUG_LEVEL_INFO)
754 printk("%s(%d):%s open(), old ref count = %d\n",
755 __FILE__,__LINE__,tty->driver->name, info->count);
756
757 /* If port is closing, signal caller to try again */
758 if (tty_hung_up_p(filp) || info->flags & ASYNC_CLOSING){
759 if (info->flags & ASYNC_CLOSING)
760 interruptible_sleep_on(&info->close_wait);
761 retval = ((info->flags & ASYNC_HUP_NOTIFY) ?
762 -EAGAIN : -ERESTARTSYS);
763 goto cleanup;
764 }
765
766 info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
767
768 spin_lock_irqsave(&info->netlock, flags);
769 if (info->netcount) {
770 retval = -EBUSY;
771 spin_unlock_irqrestore(&info->netlock, flags);
772 goto cleanup;
773 }
774 info->count++;
775 spin_unlock_irqrestore(&info->netlock, flags);
776
777 if (info->count == 1) {
778 /* 1st open on this device, init hardware */
779 retval = startup(info);
780 if (retval < 0)
781 goto cleanup;
782 }
783
784 retval = block_til_ready(tty, filp, info);
785 if (retval) {
786 if (debug_level >= DEBUG_LEVEL_INFO)
787 printk("%s(%d):%s block_til_ready() returned %d\n",
788 __FILE__,__LINE__, info->device_name, retval);
789 goto cleanup;
790 }
791
792 if (debug_level >= DEBUG_LEVEL_INFO)
793 printk("%s(%d):%s open() success\n",
794 __FILE__,__LINE__, info->device_name);
795 retval = 0;
796
797 cleanup:
798 if (retval) {
799 if (tty->count == 1)
800 info->tty = NULL; /* tty layer will release tty struct */
801 if(info->count)
802 info->count--;
803 }
804
805 return retval;
806 }
807
808 /* Called when port is closed. Wait for remaining data to be
809 * sent. Disable port and free resources.
810 */
811 static void close(struct tty_struct *tty, struct file *filp)
812 {
813 SLMP_INFO * info = (SLMP_INFO *)tty->driver_data;
814
815 if (sanity_check(info, tty->name, "close"))
816 return;
817
818 if (debug_level >= DEBUG_LEVEL_INFO)
819 printk("%s(%d):%s close() entry, count=%d\n",
820 __FILE__,__LINE__, info->device_name, info->count);
821
822 if (!info->count)
823 return;
824
825 if (tty_hung_up_p(filp))
826 goto cleanup;
827
828 if ((tty->count == 1) && (info->count != 1)) {
829 /*
830 * tty->count is 1 and the tty structure will be freed.
831 * info->count should be one in this case.
832 * if it's not, correct it so that the port is shutdown.
833 */
834 printk("%s(%d):%s close: bad refcount; tty->count is 1, "
835 "info->count is %d\n",
836 __FILE__,__LINE__, info->device_name, info->count);
837 info->count = 1;
838 }
839
840 info->count--;
841
842 /* if at least one open remaining, leave hardware active */
843 if (info->count)
844 goto cleanup;
845
846 info->flags |= ASYNC_CLOSING;
847
848 /* set tty->closing to notify line discipline to
849 * only process XON/XOFF characters. Only the N_TTY
850 * discipline appears to use this (ppp does not).
851 */
852 tty->closing = 1;
853
854 /* wait for transmit data to clear all layers */
855
856 if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE) {
857 if (debug_level >= DEBUG_LEVEL_INFO)
858 printk("%s(%d):%s close() calling tty_wait_until_sent\n",
859 __FILE__,__LINE__, info->device_name );
860 tty_wait_until_sent(tty, info->closing_wait);
861 }
862
863 if (info->flags & ASYNC_INITIALIZED)
864 wait_until_sent(tty, info->timeout);
865
866 if (tty->driver->flush_buffer)
867 tty->driver->flush_buffer(tty);
868
869 tty_ldisc_flush(tty);
870
871 shutdown(info);
872
873 tty->closing = 0;
874 info->tty = NULL;
875
876 if (info->blocked_open) {
877 if (info->close_delay) {
878 msleep_interruptible(jiffies_to_msecs(info->close_delay));
879 }
880 wake_up_interruptible(&info->open_wait);
881 }
882
883 info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
884
885 wake_up_interruptible(&info->close_wait);
886
887 cleanup:
888 if (debug_level >= DEBUG_LEVEL_INFO)
889 printk("%s(%d):%s close() exit, count=%d\n", __FILE__,__LINE__,
890 tty->driver->name, info->count);
891 }
892
893 /* Called by tty_hangup() when a hangup is signaled.
894 * This is the same as closing all open descriptors for the port.
895 */
896 static void hangup(struct tty_struct *tty)
897 {
898 SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
899
900 if (debug_level >= DEBUG_LEVEL_INFO)
901 printk("%s(%d):%s hangup()\n",
902 __FILE__,__LINE__, info->device_name );
903
904 if (sanity_check(info, tty->name, "hangup"))
905 return;
906
907 flush_buffer(tty);
908 shutdown(info);
909
910 info->count = 0;
911 info->flags &= ~ASYNC_NORMAL_ACTIVE;
912 info->tty = NULL;
913
914 wake_up_interruptible(&info->open_wait);
915 }
916
917 /* Set new termios settings
918 */
919 static void set_termios(struct tty_struct *tty, struct ktermios *old_termios)
920 {
921 SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
922 unsigned long flags;
923
924 if (debug_level >= DEBUG_LEVEL_INFO)
925 printk("%s(%d):%s set_termios()\n", __FILE__,__LINE__,
926 tty->driver->name );
927
928 change_params(info);
929
930 /* Handle transition to B0 status */
931 if (old_termios->c_cflag & CBAUD &&
932 !(tty->termios->c_cflag & CBAUD)) {
933 info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
934 spin_lock_irqsave(&info->lock,flags);
935 set_signals(info);
936 spin_unlock_irqrestore(&info->lock,flags);
937 }
938
939 /* Handle transition away from B0 status */
940 if (!(old_termios->c_cflag & CBAUD) &&
941 tty->termios->c_cflag & CBAUD) {
942 info->serial_signals |= SerialSignal_DTR;
943 if (!(tty->termios->c_cflag & CRTSCTS) ||
944 !test_bit(TTY_THROTTLED, &tty->flags)) {
945 info->serial_signals |= SerialSignal_RTS;
946 }
947 spin_lock_irqsave(&info->lock,flags);
948 set_signals(info);
949 spin_unlock_irqrestore(&info->lock,flags);
950 }
951
952 /* Handle turning off CRTSCTS */
953 if (old_termios->c_cflag & CRTSCTS &&
954 !(tty->termios->c_cflag & CRTSCTS)) {
955 tty->hw_stopped = 0;
956 tx_release(tty);
957 }
958 }
959
960 /* Send a block of data
961 *
962 * Arguments:
963 *
964 * tty pointer to tty information structure
965 * buf pointer to buffer containing send data
966 * count size of send data in bytes
967 *
968 * Return Value: number of characters written
969 */
970 static int write(struct tty_struct *tty,
971 const unsigned char *buf, int count)
972 {
973 int c, ret = 0;
974 SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
975 unsigned long flags;
976
977 if (debug_level >= DEBUG_LEVEL_INFO)
978 printk("%s(%d):%s write() count=%d\n",
979 __FILE__,__LINE__,info->device_name,count);
980
981 if (sanity_check(info, tty->name, "write"))
982 goto cleanup;
983
984 if (!info->tx_buf)
985 goto cleanup;
986
987 if (info->params.mode == MGSL_MODE_HDLC) {
988 if (count > info->max_frame_size) {
989 ret = -EIO;
990 goto cleanup;
991 }
992 if (info->tx_active)
993 goto cleanup;
994 if (info->tx_count) {
995 /* send accumulated data from send_char() calls */
996 /* as frame and wait before accepting more data. */
997 tx_load_dma_buffer(info, info->tx_buf, info->tx_count);
998 goto start;
999 }
1000 ret = info->tx_count = count;
1001 tx_load_dma_buffer(info, buf, count);
1002 goto start;
1003 }
1004
1005 for (;;) {
1006 c = min_t(int, count,
1007 min(info->max_frame_size - info->tx_count - 1,
1008 info->max_frame_size - info->tx_put));
1009 if (c <= 0)
1010 break;
1011
1012 memcpy(info->tx_buf + info->tx_put, buf, c);
1013
1014 spin_lock_irqsave(&info->lock,flags);
1015 info->tx_put += c;
1016 if (info->tx_put >= info->max_frame_size)
1017 info->tx_put -= info->max_frame_size;
1018 info->tx_count += c;
1019 spin_unlock_irqrestore(&info->lock,flags);
1020
1021 buf += c;
1022 count -= c;
1023 ret += c;
1024 }
1025
1026 if (info->params.mode == MGSL_MODE_HDLC) {
1027 if (count) {
1028 ret = info->tx_count = 0;
1029 goto cleanup;
1030 }
1031 tx_load_dma_buffer(info, info->tx_buf, info->tx_count);
1032 }
1033 start:
1034 if (info->tx_count && !tty->stopped && !tty->hw_stopped) {
1035 spin_lock_irqsave(&info->lock,flags);
1036 if (!info->tx_active)
1037 tx_start(info);
1038 spin_unlock_irqrestore(&info->lock,flags);
1039 }
1040
1041 cleanup:
1042 if (debug_level >= DEBUG_LEVEL_INFO)
1043 printk( "%s(%d):%s write() returning=%d\n",
1044 __FILE__,__LINE__,info->device_name,ret);
1045 return ret;
1046 }
1047
1048 /* Add a character to the transmit buffer.
1049 */
1050 static void put_char(struct tty_struct *tty, unsigned char ch)
1051 {
1052 SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
1053 unsigned long flags;
1054
1055 if ( debug_level >= DEBUG_LEVEL_INFO ) {
1056 printk( "%s(%d):%s put_char(%d)\n",
1057 __FILE__,__LINE__,info->device_name,ch);
1058 }
1059
1060 if (sanity_check(info, tty->name, "put_char"))
1061 return;
1062
1063 if (!info->tx_buf)
1064 return;
1065
1066 spin_lock_irqsave(&info->lock,flags);
1067
1068 if ( (info->params.mode != MGSL_MODE_HDLC) ||
1069 !info->tx_active ) {
1070
1071 if (info->tx_count < info->max_frame_size - 1) {
1072 info->tx_buf[info->tx_put++] = ch;
1073 if (info->tx_put >= info->max_frame_size)
1074 info->tx_put -= info->max_frame_size;
1075 info->tx_count++;
1076 }
1077 }
1078
1079 spin_unlock_irqrestore(&info->lock,flags);
1080 }
1081
1082 /* Send a high-priority XON/XOFF character
1083 */
1084 static void send_xchar(struct tty_struct *tty, char ch)
1085 {
1086 SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
1087 unsigned long flags;
1088
1089 if (debug_level >= DEBUG_LEVEL_INFO)
1090 printk("%s(%d):%s send_xchar(%d)\n",
1091 __FILE__,__LINE__, info->device_name, ch );
1092
1093 if (sanity_check(info, tty->name, "send_xchar"))
1094 return;
1095
1096 info->x_char = ch;
1097 if (ch) {
1098 /* Make sure transmit interrupts are on */
1099 spin_lock_irqsave(&info->lock,flags);
1100 if (!info->tx_enabled)
1101 tx_start(info);
1102 spin_unlock_irqrestore(&info->lock,flags);
1103 }
1104 }
1105
1106 /* Wait until the transmitter is empty.
1107 */
1108 static void wait_until_sent(struct tty_struct *tty, int timeout)
1109 {
1110 SLMP_INFO * info = (SLMP_INFO *)tty->driver_data;
1111 unsigned long orig_jiffies, char_time;
1112
1113 if (!info )
1114 return;
1115
1116 if (debug_level >= DEBUG_LEVEL_INFO)
1117 printk("%s(%d):%s wait_until_sent() entry\n",
1118 __FILE__,__LINE__, info->device_name );
1119
1120 if (sanity_check(info, tty->name, "wait_until_sent"))
1121 return;
1122
1123 if (!(info->flags & ASYNC_INITIALIZED))
1124 goto exit;
1125
1126 orig_jiffies = jiffies;
1127
1128 /* Set check interval to 1/5 of estimated time to
1129 * send a character, and make it at least 1. The check
1130 * interval should also be less than the timeout.
1131 * Note: use tight timings here to satisfy the NIST-PCTS.
1132 */
1133
1134 if ( info->params.data_rate ) {
1135 char_time = info->timeout/(32 * 5);
1136 if (!char_time)
1137 char_time++;
1138 } else
1139 char_time = 1;
1140
1141 if (timeout)
1142 char_time = min_t(unsigned long, char_time, timeout);
1143
1144 if ( info->params.mode == MGSL_MODE_HDLC ) {
1145 while (info->tx_active) {
1146 msleep_interruptible(jiffies_to_msecs(char_time));
1147 if (signal_pending(current))
1148 break;
1149 if (timeout && time_after(jiffies, orig_jiffies + timeout))
1150 break;
1151 }
1152 } else {
1153 //TODO: determine if there is something similar to USC16C32
1154 // TXSTATUS_ALL_SENT status
1155 while ( info->tx_active && info->tx_enabled) {
1156 msleep_interruptible(jiffies_to_msecs(char_time));
1157 if (signal_pending(current))
1158 break;
1159 if (timeout && time_after(jiffies, orig_jiffies + timeout))
1160 break;
1161 }
1162 }
1163
1164 exit:
1165 if (debug_level >= DEBUG_LEVEL_INFO)
1166 printk("%s(%d):%s wait_until_sent() exit\n",
1167 __FILE__,__LINE__, info->device_name );
1168 }
1169
1170 /* Return the count of free bytes in transmit buffer
1171 */
1172 static int write_room(struct tty_struct *tty)
1173 {
1174 SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
1175 int ret;
1176
1177 if (sanity_check(info, tty->name, "write_room"))
1178 return 0;
1179
1180 if (info->params.mode == MGSL_MODE_HDLC) {
1181 ret = (info->tx_active) ? 0 : HDLC_MAX_FRAME_SIZE;
1182 } else {
1183 ret = info->max_frame_size - info->tx_count - 1;
1184 if (ret < 0)
1185 ret = 0;
1186 }
1187
1188 if (debug_level >= DEBUG_LEVEL_INFO)
1189 printk("%s(%d):%s write_room()=%d\n",
1190 __FILE__, __LINE__, info->device_name, ret);
1191
1192 return ret;
1193 }
1194
1195 /* enable transmitter and send remaining buffered characters
1196 */
1197 static void flush_chars(struct tty_struct *tty)
1198 {
1199 SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
1200 unsigned long flags;
1201
1202 if ( debug_level >= DEBUG_LEVEL_INFO )
1203 printk( "%s(%d):%s flush_chars() entry tx_count=%d\n",
1204 __FILE__,__LINE__,info->device_name,info->tx_count);
1205
1206 if (sanity_check(info, tty->name, "flush_chars"))
1207 return;
1208
1209 if (info->tx_count <= 0 || tty->stopped || tty->hw_stopped ||
1210 !info->tx_buf)
1211 return;
1212
1213 if ( debug_level >= DEBUG_LEVEL_INFO )
1214 printk( "%s(%d):%s flush_chars() entry, starting transmitter\n",
1215 __FILE__,__LINE__,info->device_name );
1216
1217 spin_lock_irqsave(&info->lock,flags);
1218
1219 if (!info->tx_active) {
1220 if ( (info->params.mode == MGSL_MODE_HDLC) &&
1221 info->tx_count ) {
1222 /* operating in synchronous (frame oriented) mode */
1223 /* copy data from circular tx_buf to */
1224 /* transmit DMA buffer. */
1225 tx_load_dma_buffer(info,
1226 info->tx_buf,info->tx_count);
1227 }
1228 tx_start(info);
1229 }
1230
1231 spin_unlock_irqrestore(&info->lock,flags);
1232 }
1233
1234 /* Discard all data in the send buffer
1235 */
1236 static void flush_buffer(struct tty_struct *tty)
1237 {
1238 SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
1239 unsigned long flags;
1240
1241 if (debug_level >= DEBUG_LEVEL_INFO)
1242 printk("%s(%d):%s flush_buffer() entry\n",
1243 __FILE__,__LINE__, info->device_name );
1244
1245 if (sanity_check(info, tty->name, "flush_buffer"))
1246 return;
1247
1248 spin_lock_irqsave(&info->lock,flags);
1249 info->tx_count = info->tx_put = info->tx_get = 0;
1250 del_timer(&info->tx_timer);
1251 spin_unlock_irqrestore(&info->lock,flags);
1252
1253 tty_wakeup(tty);
1254 }
1255
1256 /* throttle (stop) transmitter
1257 */
1258 static void tx_hold(struct tty_struct *tty)
1259 {
1260 SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
1261 unsigned long flags;
1262
1263 if (sanity_check(info, tty->name, "tx_hold"))
1264 return;
1265
1266 if ( debug_level >= DEBUG_LEVEL_INFO )
1267 printk("%s(%d):%s tx_hold()\n",
1268 __FILE__,__LINE__,info->device_name);
1269
1270 spin_lock_irqsave(&info->lock,flags);
1271 if (info->tx_enabled)
1272 tx_stop(info);
1273 spin_unlock_irqrestore(&info->lock,flags);
1274 }
1275
1276 /* release (start) transmitter
1277 */
1278 static void tx_release(struct tty_struct *tty)
1279 {
1280 SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
1281 unsigned long flags;
1282
1283 if (sanity_check(info, tty->name, "tx_release"))
1284 return;
1285
1286 if ( debug_level >= DEBUG_LEVEL_INFO )
1287 printk("%s(%d):%s tx_release()\n",
1288 __FILE__,__LINE__,info->device_name);
1289
1290 spin_lock_irqsave(&info->lock,flags);
1291 if (!info->tx_enabled)
1292 tx_start(info);
1293 spin_unlock_irqrestore(&info->lock,flags);
1294 }
1295
1296 /* Service an IOCTL request
1297 *
1298 * Arguments:
1299 *
1300 * tty pointer to tty instance data
1301 * file pointer to associated file object for device
1302 * cmd IOCTL command code
1303 * arg command argument/context
1304 *
1305 * Return Value: 0 if success, otherwise error code
1306 */
1307 static int ioctl(struct tty_struct *tty, struct file *file,
1308 unsigned int cmd, unsigned long arg)
1309 {
1310 SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
1311 int error;
1312 struct mgsl_icount cnow; /* kernel counter temps */
1313 struct serial_icounter_struct __user *p_cuser; /* user space */
1314 unsigned long flags;
1315 void __user *argp = (void __user *)arg;
1316
1317 if (debug_level >= DEBUG_LEVEL_INFO)
1318 printk("%s(%d):%s ioctl() cmd=%08X\n", __FILE__,__LINE__,
1319 info->device_name, cmd );
1320
1321 if (sanity_check(info, tty->name, "ioctl"))
1322 return -ENODEV;
1323
1324 if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
1325 (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
1326 if (tty->flags & (1 << TTY_IO_ERROR))
1327 return -EIO;
1328 }
1329
1330 switch (cmd) {
1331 case MGSL_IOCGPARAMS:
1332 return get_params(info, argp);
1333 case MGSL_IOCSPARAMS:
1334 return set_params(info, argp);
1335 case MGSL_IOCGTXIDLE:
1336 return get_txidle(info, argp);
1337 case MGSL_IOCSTXIDLE:
1338 return set_txidle(info, (int)arg);
1339 case MGSL_IOCTXENABLE:
1340 return tx_enable(info, (int)arg);
1341 case MGSL_IOCRXENABLE:
1342 return rx_enable(info, (int)arg);
1343 case MGSL_IOCTXABORT:
1344 return tx_abort(info);
1345 case MGSL_IOCGSTATS:
1346 return get_stats(info, argp);
1347 case MGSL_IOCWAITEVENT:
1348 return wait_mgsl_event(info, argp);
1349 case MGSL_IOCLOOPTXDONE:
1350 return 0; // TODO: Not supported, need to document
1351 /* Wait for modem input (DCD,RI,DSR,CTS) change
1352 * as specified by mask in arg (TIOCM_RNG/DSR/CD/CTS)
1353 */
1354 case TIOCMIWAIT:
1355 return modem_input_wait(info,(int)arg);
1356
1357 /*
1358 * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
1359 * Return: write counters to the user passed counter struct
1360 * NB: both 1->0 and 0->1 transitions are counted except for
1361 * RI where only 0->1 is counted.
1362 */
1363 case TIOCGICOUNT:
1364 spin_lock_irqsave(&info->lock,flags);
1365 cnow = info->icount;
1366 spin_unlock_irqrestore(&info->lock,flags);
1367 p_cuser = argp;
1368 PUT_USER(error,cnow.cts, &p_cuser->cts);
1369 if (error) return error;
1370 PUT_USER(error,cnow.dsr, &p_cuser->dsr);
1371 if (error) return error;
1372 PUT_USER(error,cnow.rng, &p_cuser->rng);
1373 if (error) return error;
1374 PUT_USER(error,cnow.dcd, &p_cuser->dcd);
1375 if (error) return error;
1376 PUT_USER(error,cnow.rx, &p_cuser->rx);
1377 if (error) return error;
1378 PUT_USER(error,cnow.tx, &p_cuser->tx);
1379 if (error) return error;
1380 PUT_USER(error,cnow.frame, &p_cuser->frame);
1381 if (error) return error;
1382 PUT_USER(error,cnow.overrun, &p_cuser->overrun);
1383 if (error) return error;
1384 PUT_USER(error,cnow.parity, &p_cuser->parity);
1385 if (error) return error;
1386 PUT_USER(error,cnow.brk, &p_cuser->brk);
1387 if (error) return error;
1388 PUT_USER(error,cnow.buf_overrun, &p_cuser->buf_overrun);
1389 if (error) return error;
1390 return 0;
1391 default:
1392 return -ENOIOCTLCMD;
1393 }
1394 return 0;
1395 }
1396
1397 /*
1398 * /proc fs routines....
1399 */
1400
1401 static inline int line_info(char *buf, SLMP_INFO *info)
1402 {
1403 char stat_buf[30];
1404 int ret;
1405 unsigned long flags;
1406
1407 ret = sprintf(buf, "%s: SCABase=%08x Mem=%08X StatusControl=%08x LCR=%08X\n"
1408 "\tIRQ=%d MaxFrameSize=%u\n",
1409 info->device_name,
1410 info->phys_sca_base,
1411 info->phys_memory_base,
1412 info->phys_statctrl_base,
1413 info->phys_lcr_base,
1414 info->irq_level,
1415 info->max_frame_size );
1416
1417 /* output current serial signal states */
1418 spin_lock_irqsave(&info->lock,flags);
1419 get_signals(info);
1420 spin_unlock_irqrestore(&info->lock,flags);
1421
1422 stat_buf[0] = 0;
1423 stat_buf[1] = 0;
1424 if (info->serial_signals & SerialSignal_RTS)
1425 strcat(stat_buf, "|RTS");
1426 if (info->serial_signals & SerialSignal_CTS)
1427 strcat(stat_buf, "|CTS");
1428 if (info->serial_signals & SerialSignal_DTR)
1429 strcat(stat_buf, "|DTR");
1430 if (info->serial_signals & SerialSignal_DSR)
1431 strcat(stat_buf, "|DSR");
1432 if (info->serial_signals & SerialSignal_DCD)
1433 strcat(stat_buf, "|CD");
1434 if (info->serial_signals & SerialSignal_RI)
1435 strcat(stat_buf, "|RI");
1436
1437 if (info->params.mode == MGSL_MODE_HDLC) {
1438 ret += sprintf(buf+ret, "\tHDLC txok:%d rxok:%d",
1439 info->icount.txok, info->icount.rxok);
1440 if (info->icount.txunder)
1441 ret += sprintf(buf+ret, " txunder:%d", info->icount.txunder);
1442 if (info->icount.txabort)
1443 ret += sprintf(buf+ret, " txabort:%d", info->icount.txabort);
1444 if (info->icount.rxshort)
1445 ret += sprintf(buf+ret, " rxshort:%d", info->icount.rxshort);
1446 if (info->icount.rxlong)
1447 ret += sprintf(buf+ret, " rxlong:%d", info->icount.rxlong);
1448 if (info->icount.rxover)
1449 ret += sprintf(buf+ret, " rxover:%d", info->icount.rxover);
1450 if (info->icount.rxcrc)
1451 ret += sprintf(buf+ret, " rxlong:%d", info->icount.rxcrc);
1452 } else {
1453 ret += sprintf(buf+ret, "\tASYNC tx:%d rx:%d",
1454 info->icount.tx, info->icount.rx);
1455 if (info->icount.frame)
1456 ret += sprintf(buf+ret, " fe:%d", info->icount.frame);
1457 if (info->icount.parity)
1458 ret += sprintf(buf+ret, " pe:%d", info->icount.parity);
1459 if (info->icount.brk)
1460 ret += sprintf(buf+ret, " brk:%d", info->icount.brk);
1461 if (info->icount.overrun)
1462 ret += sprintf(buf+ret, " oe:%d", info->icount.overrun);
1463 }
1464
1465 /* Append serial signal status to end */
1466 ret += sprintf(buf+ret, " %s\n", stat_buf+1);
1467
1468 ret += sprintf(buf+ret, "\ttxactive=%d bh_req=%d bh_run=%d pending_bh=%x\n",
1469 info->tx_active,info->bh_requested,info->bh_running,
1470 info->pending_bh);
1471
1472 return ret;
1473 }
1474
1475 /* Called to print information about devices
1476 */
1477 int read_proc(char *page, char **start, off_t off, int count,
1478 int *eof, void *data)
1479 {
1480 int len = 0, l;
1481 off_t begin = 0;
1482 SLMP_INFO *info;
1483
1484 len += sprintf(page, "synclinkmp driver:%s\n", driver_version);
1485
1486 info = synclinkmp_device_list;
1487 while( info ) {
1488 l = line_info(page + len, info);
1489 len += l;
1490 if (len+begin > off+count)
1491 goto done;
1492 if (len+begin < off) {
1493 begin += len;
1494 len = 0;
1495 }
1496 info = info->next_device;
1497 }
1498
1499 *eof = 1;
1500 done:
1501 if (off >= len+begin)
1502 return 0;
1503 *start = page + (off-begin);
1504 return ((count < begin+len-off) ? count : begin+len-off);
1505 }
1506
1507 /* Return the count of bytes in transmit buffer
1508 */
1509 static int chars_in_buffer(struct tty_struct *tty)
1510 {
1511 SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
1512
1513 if (sanity_check(info, tty->name, "chars_in_buffer"))
1514 return 0;
1515
1516 if (debug_level >= DEBUG_LEVEL_INFO)
1517 printk("%s(%d):%s chars_in_buffer()=%d\n",
1518 __FILE__, __LINE__, info->device_name, info->tx_count);
1519
1520 return info->tx_count;
1521 }
1522
1523 /* Signal remote device to throttle send data (our receive data)
1524 */
1525 static void throttle(struct tty_struct * tty)
1526 {
1527 SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
1528 unsigned long flags;
1529
1530 if (debug_level >= DEBUG_LEVEL_INFO)
1531 printk("%s(%d):%s throttle() entry\n",
1532 __FILE__,__LINE__, info->device_name );
1533
1534 if (sanity_check(info, tty->name, "throttle"))
1535 return;
1536
1537 if (I_IXOFF(tty))
1538 send_xchar(tty, STOP_CHAR(tty));
1539
1540 if (tty->termios->c_cflag & CRTSCTS) {
1541 spin_lock_irqsave(&info->lock,flags);
1542 info->serial_signals &= ~SerialSignal_RTS;
1543 set_signals(info);
1544 spin_unlock_irqrestore(&info->lock,flags);
1545 }
1546 }
1547
1548 /* Signal remote device to stop throttling send data (our receive data)
1549 */
1550 static void unthrottle(struct tty_struct * tty)
1551 {
1552 SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
1553 unsigned long flags;
1554
1555 if (debug_level >= DEBUG_LEVEL_INFO)
1556 printk("%s(%d):%s unthrottle() entry\n",
1557 __FILE__,__LINE__, info->device_name );
1558
1559 if (sanity_check(info, tty->name, "unthrottle"))
1560 return;
1561
1562 if (I_IXOFF(tty)) {
1563 if (info->x_char)
1564 info->x_char = 0;
1565 else
1566 send_xchar(tty, START_CHAR(tty));
1567 }
1568
1569 if (tty->termios->c_cflag & CRTSCTS) {
1570 spin_lock_irqsave(&info->lock,flags);
1571 info->serial_signals |= SerialSignal_RTS;
1572 set_signals(info);
1573 spin_unlock_irqrestore(&info->lock,flags);
1574 }
1575 }
1576
1577 /* set or clear transmit break condition
1578 * break_state -1=set break condition, 0=clear
1579 */
1580 static void set_break(struct tty_struct *tty, int break_state)
1581 {
1582 unsigned char RegValue;
1583 SLMP_INFO * info = (SLMP_INFO *)tty->driver_data;
1584 unsigned long flags;
1585
1586 if (debug_level >= DEBUG_LEVEL_INFO)
1587 printk("%s(%d):%s set_break(%d)\n",
1588 __FILE__,__LINE__, info->device_name, break_state);
1589
1590 if (sanity_check(info, tty->name, "set_break"))
1591 return;
1592
1593 spin_lock_irqsave(&info->lock,flags);
1594 RegValue = read_reg(info, CTL);
1595 if (break_state == -1)
1596 RegValue |= BIT3;
1597 else
1598 RegValue &= ~BIT3;
1599 write_reg(info, CTL, RegValue);
1600 spin_unlock_irqrestore(&info->lock,flags);
1601 }
1602
1603 #if SYNCLINK_GENERIC_HDLC
1604
1605 /**
1606 * called by generic HDLC layer when protocol selected (PPP, frame relay, etc.)
1607 * set encoding and frame check sequence (FCS) options
1608 *
1609 * dev pointer to network device structure
1610 * encoding serial encoding setting
1611 * parity FCS setting
1612 *
1613 * returns 0 if success, otherwise error code
1614 */
1615 static int hdlcdev_attach(struct net_device *dev, unsigned short encoding,
1616 unsigned short parity)
1617 {
1618 SLMP_INFO *info = dev_to_port(dev);
1619 unsigned char new_encoding;
1620 unsigned short new_crctype;
1621
1622 /* return error if TTY interface open */
1623 if (info->count)
1624 return -EBUSY;
1625
1626 switch (encoding)
1627 {
1628 case ENCODING_NRZ: new_encoding = HDLC_ENCODING_NRZ; break;
1629 case ENCODING_NRZI: new_encoding = HDLC_ENCODING_NRZI_SPACE; break;
1630 case ENCODING_FM_MARK: new_encoding = HDLC_ENCODING_BIPHASE_MARK; break;
1631 case ENCODING_FM_SPACE: new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break;
1632 case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break;
1633 default: return -EINVAL;
1634 }
1635
1636 switch (parity)
1637 {
1638 case PARITY_NONE: new_crctype = HDLC_CRC_NONE; break;
1639 case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break;
1640 case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break;
1641 default: return -EINVAL;
1642 }
1643
1644 info->params.encoding = new_encoding;
1645 info->params.crc_type = new_crctype;
1646
1647 /* if network interface up, reprogram hardware */
1648 if (info->netcount)
1649 program_hw(info);
1650
1651 return 0;
1652 }
1653
1654 /**
1655 * called by generic HDLC layer to send frame
1656 *
1657 * skb socket buffer containing HDLC frame
1658 * dev pointer to network device structure
1659 *
1660 * returns 0 if success, otherwise error code
1661 */
1662 static int hdlcdev_xmit(struct sk_buff *skb, struct net_device *dev)
1663 {
1664 SLMP_INFO *info = dev_to_port(dev);
1665 struct net_device_stats *stats = hdlc_stats(dev);
1666 unsigned long flags;
1667
1668 if (debug_level >= DEBUG_LEVEL_INFO)
1669 printk(KERN_INFO "%s:hdlc_xmit(%s)\n",__FILE__,dev->name);
1670
1671 /* stop sending until this frame completes */
1672 netif_stop_queue(dev);
1673
1674 /* copy data to device buffers */
1675 info->tx_count = skb->len;
1676 tx_load_dma_buffer(info, skb->data, skb->len);
1677
1678 /* update network statistics */
1679 stats->tx_packets++;
1680 stats->tx_bytes += skb->len;
1681
1682 /* done with socket buffer, so free it */
1683 dev_kfree_skb(skb);
1684
1685 /* save start time for transmit timeout detection */
1686 dev->trans_start = jiffies;
1687
1688 /* start hardware transmitter if necessary */
1689 spin_lock_irqsave(&info->lock,flags);
1690 if (!info->tx_active)
1691 tx_start(info);
1692 spin_unlock_irqrestore(&info->lock,flags);
1693
1694 return 0;
1695 }
1696
1697 /**
1698 * called by network layer when interface enabled
1699 * claim resources and initialize hardware
1700 *
1701 * dev pointer to network device structure
1702 *
1703 * returns 0 if success, otherwise error code
1704 */
1705 static int hdlcdev_open(struct net_device *dev)
1706 {
1707 SLMP_INFO *info = dev_to_port(dev);
1708 int rc;
1709 unsigned long flags;
1710
1711 if (debug_level >= DEBUG_LEVEL_INFO)
1712 printk("%s:hdlcdev_open(%s)\n",__FILE__,dev->name);
1713
1714 /* generic HDLC layer open processing */
1715 if ((rc = hdlc_open(dev)))
1716 return rc;
1717
1718 /* arbitrate between network and tty opens */
1719 spin_lock_irqsave(&info->netlock, flags);
1720 if (info->count != 0 || info->netcount != 0) {
1721 printk(KERN_WARNING "%s: hdlc_open returning busy\n", dev->name);
1722 spin_unlock_irqrestore(&info->netlock, flags);
1723 return -EBUSY;
1724 }
1725 info->netcount=1;
1726 spin_unlock_irqrestore(&info->netlock, flags);
1727
1728 /* claim resources and init adapter */
1729 if ((rc = startup(info)) != 0) {
1730 spin_lock_irqsave(&info->netlock, flags);
1731 info->netcount=0;
1732 spin_unlock_irqrestore(&info->netlock, flags);
1733 return rc;
1734 }
1735
1736 /* assert DTR and RTS, apply hardware settings */
1737 info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
1738 program_hw(info);
1739
1740 /* enable network layer transmit */
1741 dev->trans_start = jiffies;
1742 netif_start_queue(dev);
1743
1744 /* inform generic HDLC layer of current DCD status */
1745 spin_lock_irqsave(&info->lock, flags);
1746 get_signals(info);
1747 spin_unlock_irqrestore(&info->lock, flags);
1748 if (info->serial_signals & SerialSignal_DCD)
1749 netif_carrier_on(dev);
1750 else
1751 netif_carrier_off(dev);
1752 return 0;
1753 }
1754
1755 /**
1756 * called by network layer when interface is disabled
1757 * shutdown hardware and release resources
1758 *
1759 * dev pointer to network device structure
1760 *
1761 * returns 0 if success, otherwise error code
1762 */
1763 static int hdlcdev_close(struct net_device *dev)
1764 {
1765 SLMP_INFO *info = dev_to_port(dev);
1766 unsigned long flags;
1767
1768 if (debug_level >= DEBUG_LEVEL_INFO)
1769 printk("%s:hdlcdev_close(%s)\n",__FILE__,dev->name);
1770
1771 netif_stop_queue(dev);
1772
1773 /* shutdown adapter and release resources */
1774 shutdown(info);
1775
1776 hdlc_close(dev);
1777
1778 spin_lock_irqsave(&info->netlock, flags);
1779 info->netcount=0;
1780 spin_unlock_irqrestore(&info->netlock, flags);
1781
1782 return 0;
1783 }
1784
1785 /**
1786 * called by network layer to process IOCTL call to network device
1787 *
1788 * dev pointer to network device structure
1789 * ifr pointer to network interface request structure
1790 * cmd IOCTL command code
1791 *
1792 * returns 0 if success, otherwise error code
1793 */
1794 static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
1795 {
1796 const size_t size = sizeof(sync_serial_settings);
1797 sync_serial_settings new_line;
1798 sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
1799 SLMP_INFO *info = dev_to_port(dev);
1800 unsigned int flags;
1801
1802 if (debug_level >= DEBUG_LEVEL_INFO)
1803 printk("%s:hdlcdev_ioctl(%s)\n",__FILE__,dev->name);
1804
1805 /* return error if TTY interface open */
1806 if (info->count)
1807 return -EBUSY;
1808
1809 if (cmd != SIOCWANDEV)
1810 return hdlc_ioctl(dev, ifr, cmd);
1811
1812 switch(ifr->ifr_settings.type) {
1813 case IF_GET_IFACE: /* return current sync_serial_settings */
1814
1815 ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
1816 if (ifr->ifr_settings.size < size) {
1817 ifr->ifr_settings.size = size; /* data size wanted */
1818 return -ENOBUFS;
1819 }
1820
1821 flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1822 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
1823 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1824 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
1825
1826 switch (flags){
1827 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break;
1828 case (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_INT; break;
1829 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_TXINT; break;
1830 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break;
1831 default: new_line.clock_type = CLOCK_DEFAULT;
1832 }
1833
1834 new_line.clock_rate = info->params.clock_speed;
1835 new_line.loopback = info->params.loopback ? 1:0;
1836
1837 if (copy_to_user(line, &new_line, size))
1838 return -EFAULT;
1839 return 0;
1840
1841 case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */
1842
1843 if(!capable(CAP_NET_ADMIN))
1844 return -EPERM;
1845 if (copy_from_user(&new_line, line, size))
1846 return -EFAULT;
1847
1848 switch (new_line.clock_type)
1849 {
1850 case CLOCK_EXT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break;
1851 case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break;
1852 case CLOCK_INT: flags = HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG; break;
1853 case CLOCK_TXINT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG; break;
1854 case CLOCK_DEFAULT: flags = info->params.flags &
1855 (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1856 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
1857 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1858 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); break;
1859 default: return -EINVAL;
1860 }
1861
1862 if (new_line.loopback != 0 && new_line.loopback != 1)
1863 return -EINVAL;
1864
1865 info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1866 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
1867 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1868 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
1869 info->params.flags |= flags;
1870
1871 info->params.loopback = new_line.loopback;
1872
1873 if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG))
1874 info->params.clock_speed = new_line.clock_rate;
1875 else
1876 info->params.clock_speed = 0;
1877
1878 /* if network interface up, reprogram hardware */
1879 if (info->netcount)
1880 program_hw(info);
1881 return 0;
1882
1883 default:
1884 return hdlc_ioctl(dev, ifr, cmd);
1885 }
1886 }
1887
1888 /**
1889 * called by network layer when transmit timeout is detected
1890 *
1891 * dev pointer to network device structure
1892 */
1893 static void hdlcdev_tx_timeout(struct net_device *dev)
1894 {
1895 SLMP_INFO *info = dev_to_port(dev);
1896 struct net_device_stats *stats = hdlc_stats(dev);
1897 unsigned long flags;
1898
1899 if (debug_level >= DEBUG_LEVEL_INFO)
1900 printk("hdlcdev_tx_timeout(%s)\n",dev->name);
1901
1902 stats->tx_errors++;
1903 stats->tx_aborted_errors++;
1904
1905 spin_lock_irqsave(&info->lock,flags);
1906 tx_stop(info);
1907 spin_unlock_irqrestore(&info->lock,flags);
1908
1909 netif_wake_queue(dev);
1910 }
1911
1912 /**
1913 * called by device driver when transmit completes
1914 * reenable network layer transmit if stopped
1915 *
1916 * info pointer to device instance information
1917 */
1918 static void hdlcdev_tx_done(SLMP_INFO *info)
1919 {
1920 if (netif_queue_stopped(info->netdev))
1921 netif_wake_queue(info->netdev);
1922 }
1923
1924 /**
1925 * called by device driver when frame received
1926 * pass frame to network layer
1927 *
1928 * info pointer to device instance information
1929 * buf pointer to buffer contianing frame data
1930 * size count of data bytes in buf
1931 */
1932 static void hdlcdev_rx(SLMP_INFO *info, char *buf, int size)
1933 {
1934 struct sk_buff *skb = dev_alloc_skb(size);
1935 struct net_device *dev = info->netdev;
1936 struct net_device_stats *stats = hdlc_stats(dev);
1937
1938 if (debug_level >= DEBUG_LEVEL_INFO)
1939 printk("hdlcdev_rx(%s)\n",dev->name);
1940
1941 if (skb == NULL) {
1942 printk(KERN_NOTICE "%s: can't alloc skb, dropping packet\n", dev->name);
1943 stats->rx_dropped++;
1944 return;
1945 }
1946
1947 memcpy(skb_put(skb, size),buf,size);
1948
1949 skb->protocol = hdlc_type_trans(skb, info->netdev);
1950
1951 stats->rx_packets++;
1952 stats->rx_bytes += size;
1953
1954 netif_rx(skb);
1955
1956 info->netdev->last_rx = jiffies;
1957 }
1958
1959 /**
1960 * called by device driver when adding device instance
1961 * do generic HDLC initialization
1962 *
1963 * info pointer to device instance information
1964 *
1965 * returns 0 if success, otherwise error code
1966 */
1967 static int hdlcdev_init(SLMP_INFO *info)
1968 {
1969 int rc;
1970 struct net_device *dev;
1971 hdlc_device *hdlc;
1972
1973 /* allocate and initialize network and HDLC layer objects */
1974
1975 if (!(dev = alloc_hdlcdev(info))) {
1976 printk(KERN_ERR "%s:hdlc device allocation failure\n",__FILE__);
1977 return -ENOMEM;
1978 }
1979
1980 /* for network layer reporting purposes only */
1981 dev->mem_start = info->phys_sca_base;
1982 dev->mem_end = info->phys_sca_base + SCA_BASE_SIZE - 1;
1983 dev->irq = info->irq_level;
1984
1985 /* network layer callbacks and settings */
1986 dev->do_ioctl = hdlcdev_ioctl;
1987 dev->open = hdlcdev_open;
1988 dev->stop = hdlcdev_close;
1989 dev->tx_timeout = hdlcdev_tx_timeout;
1990 dev->watchdog_timeo = 10*HZ;
1991 dev->tx_queue_len = 50;
1992
1993 /* generic HDLC layer callbacks and settings */
1994 hdlc = dev_to_hdlc(dev);
1995 hdlc->attach = hdlcdev_attach;
1996 hdlc->xmit = hdlcdev_xmit;
1997
1998 /* register objects with HDLC layer */
1999 if ((rc = register_hdlc_device(dev))) {
2000 printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__);
2001 free_netdev(dev);
2002 return rc;
2003 }
2004
2005 info->netdev = dev;
2006 return 0;
2007 }
2008
2009 /**
2010 * called by device driver when removing device instance
2011 * do generic HDLC cleanup
2012 *
2013 * info pointer to device instance information
2014 */
2015 static void hdlcdev_exit(SLMP_INFO *info)
2016 {
2017 unregister_hdlc_device(info->netdev);
2018 free_netdev(info->netdev);
2019 info->netdev = NULL;
2020 }
2021
2022 #endif /* CONFIG_HDLC */
2023
2024
2025 /* Return next bottom half action to perform.
2026 * Return Value: BH action code or 0 if nothing to do.
2027 */
2028 int bh_action(SLMP_INFO *info)
2029 {
2030 unsigned long flags;
2031 int rc = 0;
2032
2033 spin_lock_irqsave(&info->lock,flags);
2034
2035 if (info->pending_bh & BH_RECEIVE) {
2036 info->pending_bh &= ~BH_RECEIVE;
2037 rc = BH_RECEIVE;
2038 } else if (info->pending_bh & BH_TRANSMIT) {
2039 info->pending_bh &= ~BH_TRANSMIT;
2040 rc = BH_TRANSMIT;
2041 } else if (info->pending_bh & BH_STATUS) {
2042 info->pending_bh &= ~BH_STATUS;
2043 rc = BH_STATUS;
2044 }
2045
2046 if (!rc) {
2047 /* Mark BH routine as complete */
2048 info->bh_running = 0;
2049 info->bh_requested = 0;
2050 }
2051
2052 spin_unlock_irqrestore(&info->lock,flags);
2053
2054 return rc;
2055 }
2056
2057 /* Perform bottom half processing of work items queued by ISR.
2058 */
2059 void bh_handler(struct work_struct *work)
2060 {
2061 SLMP_INFO *info = container_of(work, SLMP_INFO, task);
2062 int action;
2063
2064 if (!info)
2065 return;
2066
2067 if ( debug_level >= DEBUG_LEVEL_BH )
2068 printk( "%s(%d):%s bh_handler() entry\n",
2069 __FILE__,__LINE__,info->device_name);
2070
2071 info->bh_running = 1;
2072
2073 while((action = bh_action(info)) != 0) {
2074
2075 /* Process work item */
2076 if ( debug_level >= DEBUG_LEVEL_BH )
2077 printk( "%s(%d):%s bh_handler() work item action=%d\n",
2078 __FILE__,__LINE__,info->device_name, action);
2079
2080 switch (action) {
2081
2082 case BH_RECEIVE:
2083 bh_receive(info);
2084 break;
2085 case BH_TRANSMIT:
2086 bh_transmit(info);
2087 break;
2088 case BH_STATUS:
2089 bh_status(info);
2090 break;
2091 default:
2092 /* unknown work item ID */
2093 printk("%s(%d):%s Unknown work item ID=%08X!\n",
2094 __FILE__,__LINE__,info->device_name,action);
2095 break;
2096 }
2097 }
2098
2099 if ( debug_level >= DEBUG_LEVEL_BH )
2100 printk( "%s(%d):%s bh_handler() exit\n",
2101 __FILE__,__LINE__,info->device_name);
2102 }
2103
2104 void bh_receive(SLMP_INFO *info)
2105 {
2106 if ( debug_level >= DEBUG_LEVEL_BH )
2107 printk( "%s(%d):%s bh_receive()\n",
2108 __FILE__,__LINE__,info->device_name);
2109
2110 while( rx_get_frame(info) );
2111 }
2112
2113 void bh_transmit(SLMP_INFO *info)
2114 {
2115 struct tty_struct *tty = info->tty;
2116
2117 if ( debug_level >= DEBUG_LEVEL_BH )
2118 printk( "%s(%d):%s bh_transmit() entry\n",
2119 __FILE__,__LINE__,info->device_name);
2120
2121 if (tty)
2122 tty_wakeup(tty);
2123 }
2124
2125 void bh_status(SLMP_INFO *info)
2126 {
2127 if ( debug_level >= DEBUG_LEVEL_BH )
2128 printk( "%s(%d):%s bh_status() entry\n",
2129 __FILE__,__LINE__,info->device_name);
2130
2131 info->ri_chkcount = 0;
2132 info->dsr_chkcount = 0;
2133 info->dcd_chkcount = 0;
2134 info->cts_chkcount = 0;
2135 }
2136
2137 void isr_timer(SLMP_INFO * info)
2138 {
2139 unsigned char timer = (info->port_num & 1) ? TIMER2 : TIMER0;
2140
2141 /* IER2<7..4> = timer<3..0> interrupt enables (0=disabled) */
2142 write_reg(info, IER2, 0);
2143
2144 /* TMCS, Timer Control/Status Register
2145 *
2146 * 07 CMF, Compare match flag (read only) 1=match
2147 * 06 ECMI, CMF Interrupt Enable: 0=disabled
2148 * 05 Reserved, must be 0
2149 * 04 TME, Timer Enable
2150 * 03..00 Reserved, must be 0
2151 *
2152 * 0000 0000
2153 */
2154 write_reg(info, (unsigned char)(timer + TMCS), 0);
2155
2156 info->irq_occurred = TRUE;
2157
2158 if ( debug_level >= DEBUG_LEVEL_ISR )
2159 printk("%s(%d):%s isr_timer()\n",
2160 __FILE__,__LINE__,info->device_name);
2161 }
2162
2163 void isr_rxint(SLMP_INFO * info)
2164 {
2165 struct tty_struct *tty = info->tty;
2166 struct mgsl_icount *icount = &info->icount;
2167 unsigned char status = read_reg(info, SR1) & info->ie1_value & (FLGD + IDLD + CDCD + BRKD);
2168 unsigned char status2 = read_reg(info, SR2) & info->ie2_value & OVRN;
2169
2170 /* clear status bits */
2171 if (status)
2172 write_reg(info, SR1, status);
2173
2174 if (status2)
2175 write_reg(info, SR2, status2);
2176
2177 if ( debug_level >= DEBUG_LEVEL_ISR )
2178 printk("%s(%d):%s isr_rxint status=%02X %02x\n",
2179 __FILE__,__LINE__,info->device_name,status,status2);
2180
2181 if (info->params.mode == MGSL_MODE_ASYNC) {
2182 if (status & BRKD) {
2183 icount->brk++;
2184
2185 /* process break detection if tty control
2186 * is not set to ignore it
2187 */
2188 if ( tty ) {
2189 if (!(status & info->ignore_status_mask1)) {
2190 if (info->read_status_mask1 & BRKD) {
2191 tty_insert_flip_char(tty, 0, TTY_BREAK);
2192 if (info->flags & ASYNC_SAK)
2193 do_SAK(tty);
2194 }
2195 }
2196 }
2197 }
2198 }
2199 else {
2200 if (status & (FLGD|IDLD)) {
2201 if (status & FLGD)
2202 info->icount.exithunt++;
2203 else if (status & IDLD)
2204 info->icount.rxidle++;
2205 wake_up_interruptible(&info->event_wait_q);
2206 }
2207 }
2208
2209 if (status & CDCD) {
2210 /* simulate a common modem status change interrupt
2211 * for our handler
2212 */
2213 get_signals( info );
2214 isr_io_pin(info,
2215 MISCSTATUS_DCD_LATCHED|(info->serial_signals&SerialSignal_DCD));
2216 }
2217 }
2218
2219 /*
2220 * handle async rx data interrupts
2221 */
2222 void isr_rxrdy(SLMP_INFO * info)
2223 {
2224 u16 status;
2225 unsigned char DataByte;
2226 struct tty_struct *tty = info->tty;
2227 struct mgsl_icount *icount = &info->icount;
2228
2229 if ( debug_level >= DEBUG_LEVEL_ISR )
2230 printk("%s(%d):%s isr_rxrdy\n",
2231 __FILE__,__LINE__,info->device_name);
2232
2233 while((status = read_reg(info,CST0)) & BIT0)
2234 {
2235 int flag = 0;
2236 int over = 0;
2237 DataByte = read_reg(info,TRB);
2238
2239 icount->rx++;
2240
2241 if ( status & (PE + FRME + OVRN) ) {
2242 printk("%s(%d):%s rxerr=%04X\n",
2243 __FILE__,__LINE__,info->device_name,status);
2244
2245 /* update error statistics */
2246 if (status & PE)
2247 icount->parity++;
2248 else if (status & FRME)
2249 icount->frame++;
2250 else if (status & OVRN)
2251 icount->overrun++;
2252
2253 /* discard char if tty control flags say so */
2254 if (status & info->ignore_status_mask2)
2255 continue;
2256
2257 status &= info->read_status_mask2;
2258
2259 if ( tty ) {
2260 if (status & PE)
2261 flag = TTY_PARITY;
2262 else if (status & FRME)
2263 flag = TTY_FRAME;
2264 if (status & OVRN) {
2265 /* Overrun is special, since it's
2266 * reported immediately, and doesn't
2267 * affect the current character
2268 */
2269 over = 1;
2270 }
2271 }
2272 } /* end of if (error) */
2273
2274 if ( tty ) {
2275 tty_insert_flip_char(tty, DataByte, flag);
2276 if (over)
2277 tty_insert_flip_char(tty, 0, TTY_OVERRUN);
2278 }
2279 }
2280
2281 if ( debug_level >= DEBUG_LEVEL_ISR ) {
2282 printk("%s(%d):%s rx=%d brk=%d parity=%d frame=%d overrun=%d\n",
2283 __FILE__,__LINE__,info->device_name,
2284 icount->rx,icount->brk,icount->parity,
2285 icount->frame,icount->overrun);
2286 }
2287
2288 if ( tty )
2289 tty_flip_buffer_push(tty);
2290 }
2291
2292 static void isr_txeom(SLMP_INFO * info, unsigned char status)
2293 {
2294 if ( debug_level >= DEBUG_LEVEL_ISR )
2295 printk("%s(%d):%s isr_txeom status=%02x\n",
2296 __FILE__,__LINE__,info->device_name,status);
2297
2298 write_reg(info, TXDMA + DIR, 0x00); /* disable Tx DMA IRQs */
2299 write_reg(info, TXDMA + DSR, 0xc0); /* clear IRQs and disable DMA */
2300 write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
2301
2302 if (status & UDRN) {
2303 write_reg(info, CMD, TXRESET);
2304 write_reg(info, CMD, TXENABLE);
2305 } else
2306 write_reg(info, CMD, TXBUFCLR);
2307
2308 /* disable and clear tx interrupts */
2309 info->ie0_value &= ~TXRDYE;
2310 info->ie1_value &= ~(IDLE + UDRN);
2311 write_reg16(info, IE0, (unsigned short)((info->ie1_value << 8) + info->ie0_value));
2312 write_reg(info, SR1, (unsigned char)(UDRN + IDLE));
2313
2314 if ( info->tx_active ) {
2315 if (info->params.mode != MGSL_MODE_ASYNC) {
2316 if (status & UDRN)
2317 info->icount.txunder++;
2318 else if (status & IDLE)
2319 info->icount.txok++;
2320 }
2321
2322 info->tx_active = 0;
2323 info->tx_count = info->tx_put = info->tx_get = 0;
2324
2325 del_timer(&info->tx_timer);
2326
2327 if (info->params.mode != MGSL_MODE_ASYNC && info->drop_rts_on_tx_done ) {
2328 info->serial_signals &= ~SerialSignal_RTS;
2329 info->drop_rts_on_tx_done = 0;
2330 set_signals(info);
2331 }
2332
2333 #if SYNCLINK_GENERIC_HDLC
2334 if (info->netcount)
2335 hdlcdev_tx_done(info);
2336 else
2337 #endif
2338 {
2339 if (info->tty && (info->tty->stopped || info->tty->hw_stopped)) {
2340 tx_stop(info);
2341 return;
2342 }
2343 info->pending_bh |= BH_TRANSMIT;
2344 }
2345 }
2346 }
2347
2348
2349 /*
2350 * handle tx status interrupts
2351 */
2352 void isr_txint(SLMP_INFO * info)
2353 {
2354 unsigned char status = read_reg(info, SR1) & info->ie1_value & (UDRN + IDLE + CCTS);
2355
2356 /* clear status bits */
2357 write_reg(info, SR1, status);
2358
2359 if ( debug_level >= DEBUG_LEVEL_ISR )
2360 printk("%s(%d):%s isr_txint status=%02x\n",
2361 __FILE__,__LINE__,info->device_name,status);
2362
2363 if (status & (UDRN + IDLE))
2364 isr_txeom(info, status);
2365
2366 if (status & CCTS) {
2367 /* simulate a common modem status change interrupt
2368 * for our handler
2369 */
2370 get_signals( info );
2371 isr_io_pin(info,
2372 MISCSTATUS_CTS_LATCHED|(info->serial_signals&SerialSignal_CTS));
2373
2374 }
2375 }
2376
2377 /*
2378 * handle async tx data interrupts
2379 */
2380 void isr_txrdy(SLMP_INFO * info)
2381 {
2382 if ( debug_level >= DEBUG_LEVEL_ISR )
2383 printk("%s(%d):%s isr_txrdy() tx_count=%d\n",
2384 __FILE__,__LINE__,info->device_name,info->tx_count);
2385
2386 if (info->params.mode != MGSL_MODE_ASYNC) {
2387 /* disable TXRDY IRQ, enable IDLE IRQ */
2388 info->ie0_value &= ~TXRDYE;
2389 info->ie1_value |= IDLE;
2390 write_reg16(info, IE0, (unsigned short)((info->ie1_value << 8) + info->ie0_value));
2391 return;
2392 }
2393
2394 if (info->tty && (info->tty->stopped || info->tty->hw_stopped)) {
2395 tx_stop(info);
2396 return;
2397 }
2398
2399 if ( info->tx_count )
2400 tx_load_fifo( info );
2401 else {
2402 info->tx_active = 0;
2403 info->ie0_value &= ~TXRDYE;
2404 write_reg(info, IE0, info->ie0_value);
2405 }
2406
2407 if (info->tx_count < WAKEUP_CHARS)
2408 info->pending_bh |= BH_TRANSMIT;
2409 }
2410
2411 void isr_rxdmaok(SLMP_INFO * info)
2412 {
2413 /* BIT7 = EOT (end of transfer)
2414 * BIT6 = EOM (end of message/frame)
2415 */
2416 unsigned char status = read_reg(info,RXDMA + DSR) & 0xc0;
2417
2418 /* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */
2419 write_reg(info, RXDMA + DSR, (unsigned char)(status | 1));
2420
2421 if ( debug_level >= DEBUG_LEVEL_ISR )
2422 printk("%s(%d):%s isr_rxdmaok(), status=%02x\n",
2423 __FILE__,__LINE__,info->device_name,status);
2424
2425 info->pending_bh |= BH_RECEIVE;
2426 }
2427
2428 void isr_rxdmaerror(SLMP_INFO * info)
2429 {
2430 /* BIT5 = BOF (buffer overflow)
2431 * BIT4 = COF (counter overflow)
2432 */
2433 unsigned char status = read_reg(info,RXDMA + DSR) & 0x30;
2434
2435 /* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */
2436 write_reg(info, RXDMA + DSR, (unsigned char)(status | 1));
2437
2438 if ( debug_level >= DEBUG_LEVEL_ISR )
2439 printk("%s(%d):%s isr_rxdmaerror(), status=%02x\n",
2440 __FILE__,__LINE__,info->device_name,status);
2441
2442 info->rx_overflow = TRUE;
2443 info->pending_bh |= BH_RECEIVE;
2444 }
2445
2446 void isr_txdmaok(SLMP_INFO * info)
2447 {
2448 unsigned char status_reg1 = read_reg(info, SR1);
2449
2450 write_reg(info, TXDMA + DIR, 0x00); /* disable Tx DMA IRQs */
2451 write_reg(info, TXDMA + DSR, 0xc0); /* clear IRQs and disable DMA */
2452 write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
2453
2454 if ( debug_level >= DEBUG_LEVEL_ISR )
2455 printk("%s(%d):%s isr_txdmaok(), status=%02x\n",
2456 __FILE__,__LINE__,info->device_name,status_reg1);
2457
2458 /* program TXRDY as FIFO empty flag, enable TXRDY IRQ */
2459 write_reg16(info, TRC0, 0);
2460 info->ie0_value |= TXRDYE;
2461 write_reg(info, IE0, info->ie0_value);
2462 }
2463
2464 void isr_txdmaerror(SLMP_INFO * info)
2465 {
2466 /* BIT5 = BOF (buffer overflow)
2467 * BIT4 = COF (counter overflow)
2468 */
2469 unsigned char status = read_reg(info,TXDMA + DSR) & 0x30;
2470
2471 /* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */
2472 write_reg(info, TXDMA + DSR, (unsigned char)(status | 1));
2473
2474 if ( debug_level >= DEBUG_LEVEL_ISR )
2475 printk("%s(%d):%s isr_txdmaerror(), status=%02x\n",
2476 __FILE__,__LINE__,info->device_name,status);
2477 }
2478
2479 /* handle input serial signal changes
2480 */
2481 void isr_io_pin( SLMP_INFO *info, u16 status )
2482 {
2483 struct mgsl_icount *icount;
2484
2485 if ( debug_level >= DEBUG_LEVEL_ISR )
2486 printk("%s(%d):isr_io_pin status=%04X\n",
2487 __FILE__,__LINE__,status);
2488
2489 if (status & (MISCSTATUS_CTS_LATCHED | MISCSTATUS_DCD_LATCHED |
2490 MISCSTATUS_DSR_LATCHED | MISCSTATUS_RI_LATCHED) ) {
2491 icount = &info->icount;
2492 /* update input line counters */
2493 if (status & MISCSTATUS_RI_LATCHED) {
2494 icount->rng++;
2495 if ( status & SerialSignal_RI )
2496 info->input_signal_events.ri_up++;
2497 else
2498 info->input_signal_events.ri_down++;
2499 }
2500 if (status & MISCSTATUS_DSR_LATCHED) {
2501 icount->dsr++;
2502 if ( status & SerialSignal_DSR )
2503 info->input_signal_events.dsr_up++;
2504 else
2505 info->input_signal_events.dsr_down++;
2506 }
2507 if (status & MISCSTATUS_DCD_LATCHED) {
2508 if ((info->dcd_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) {
2509 info->ie1_value &= ~CDCD;
2510 write_reg(info, IE1, info->ie1_value);
2511 }
2512 icount->dcd++;
2513 if (status & SerialSignal_DCD) {
2514 info->input_signal_events.dcd_up++;
2515 } else
2516 info->input_signal_events.dcd_down++;
2517 #if SYNCLINK_GENERIC_HDLC
2518 if (info->netcount) {
2519 if (status & SerialSignal_DCD)
2520 netif_carrier_on(info->netdev);
2521 else
2522 netif_carrier_off(info->netdev);
2523 }
2524 #endif
2525 }
2526 if (status & MISCSTATUS_CTS_LATCHED)
2527 {
2528 if ((info->cts_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) {
2529 info->ie1_value &= ~CCTS;
2530 write_reg(info, IE1, info->ie1_value);
2531 }
2532 icount->cts++;
2533 if ( status & SerialSignal_CTS )
2534 info->input_signal_events.cts_up++;
2535 else
2536 info->input_signal_events.cts_down++;
2537 }
2538 wake_up_interruptible(&info->status_event_wait_q);
2539 wake_up_interruptible(&info->event_wait_q);
2540
2541 if ( (info->flags & ASYNC_CHECK_CD) &&
2542 (status & MISCSTATUS_DCD_LATCHED) ) {
2543 if ( debug_level >= DEBUG_LEVEL_ISR )
2544 printk("%s CD now %s...", info->device_name,
2545 (status & SerialSignal_DCD) ? "on" : "off");
2546 if (status & SerialSignal_DCD)
2547 wake_up_interruptible(&info->open_wait);
2548 else {
2549 if ( debug_level >= DEBUG_LEVEL_ISR )
2550 printk("doing serial hangup...");
2551 if (info->tty)
2552 tty_hangup(info->tty);
2553 }
2554 }
2555
2556 if ( (info->flags & ASYNC_CTS_FLOW) &&
2557 (status & MISCSTATUS_CTS_LATCHED) ) {
2558 if ( info->tty ) {
2559 if (info->tty->hw_stopped) {
2560 if (status & SerialSignal_CTS) {
2561 if ( debug_level >= DEBUG_LEVEL_ISR )
2562 printk("CTS tx start...");
2563 info->tty->hw_stopped = 0;
2564 tx_start(info);
2565 info->pending_bh |= BH_TRANSMIT;
2566 return;
2567 }
2568 } else {
2569 if (!(status & SerialSignal_CTS)) {
2570 if ( debug_level >= DEBUG_LEVEL_ISR )
2571 printk("CTS tx stop...");
2572 info->tty->hw_stopped = 1;
2573 tx_stop(info);
2574 }
2575 }
2576 }
2577 }
2578 }
2579
2580 info->pending_bh |= BH_STATUS;
2581 }
2582
2583 /* Interrupt service routine entry point.
2584 *
2585 * Arguments:
2586 * irq interrupt number that caused interrupt
2587 * dev_id device ID supplied during interrupt registration
2588 * regs interrupted processor context
2589 */
2590 static irqreturn_t synclinkmp_interrupt(int irq, void *dev_id)
2591 {
2592 SLMP_INFO * info;
2593 unsigned char status, status0, status1=0;
2594 unsigned char dmastatus, dmastatus0, dmastatus1=0;
2595 unsigned char timerstatus0, timerstatus1=0;
2596 unsigned char shift;
2597 unsigned int i;
2598 unsigned short tmp;
2599
2600 if ( debug_level >= DEBUG_LEVEL_ISR )
2601 printk("%s(%d): synclinkmp_interrupt(%d)entry.\n",
2602 __FILE__,__LINE__,irq);
2603
2604 info = (SLMP_INFO *)dev_id;
2605 if (!info)
2606 return IRQ_NONE;
2607
2608 spin_lock(&info->lock);
2609
2610 for(;;) {
2611
2612 /* get status for SCA0 (ports 0-1) */
2613 tmp = read_reg16(info, ISR0); /* get ISR0 and ISR1 in one read */
2614 status0 = (unsigned char)tmp;
2615 dmastatus0 = (unsigned char)(tmp>>8);
2616 timerstatus0 = read_reg(info, ISR2);
2617
2618 if ( debug_level >= DEBUG_LEVEL_ISR )
2619 printk("%s(%d):%s status0=%02x, dmastatus0=%02x, timerstatus0=%02x\n",
2620 __FILE__,__LINE__,info->device_name,
2621 status0,dmastatus0,timerstatus0);
2622
2623 if (info->port_count == 4) {
2624 /* get status for SCA1 (ports 2-3) */
2625 tmp = read_reg16(info->port_array[2], ISR0);
2626 status1 = (unsigned char)tmp;
2627 dmastatus1 = (unsigned char)(tmp>>8);
2628 timerstatus1 = read_reg(info->port_array[2], ISR2);
2629
2630 if ( debug_level >= DEBUG_LEVEL_ISR )
2631 printk("%s(%d):%s status1=%02x, dmastatus1=%02x, timerstatus1=%02x\n",
2632 __FILE__,__LINE__,info->device_name,
2633 status1,dmastatus1,timerstatus1);
2634 }
2635
2636 if (!status0 && !dmastatus0 && !timerstatus0 &&
2637 !status1 && !dmastatus1 && !timerstatus1)
2638 break;
2639
2640 for(i=0; i < info->port_count ; i++) {
2641 if (info->port_array[i] == NULL)
2642 continue;
2643 if (i < 2) {
2644 status = status0;
2645 dmastatus = dmastatus0;
2646 } else {
2647 status = status1;
2648 dmastatus = dmastatus1;
2649 }
2650
2651 shift = i & 1 ? 4 :0;
2652
2653 if (status & BIT0 << shift)
2654 isr_rxrdy(info->port_array[i]);
2655 if (status & BIT1 << shift)
2656 isr_txrdy(info->port_array[i]);
2657 if (status & BIT2 << shift)
2658 isr_rxint(info->port_array[i]);
2659 if (status & BIT3 << shift)
2660 isr_txint(info->port_array[i]);
2661
2662 if (dmastatus & BIT0 << shift)
2663 isr_rxdmaerror(info->port_array[i]);
2664 if (dmastatus & BIT1 << shift)
2665 isr_rxdmaok(info->port_array[i]);
2666 if (dmastatus & BIT2 << shift)
2667 isr_txdmaerror(info->port_array[i]);
2668 if (dmastatus & BIT3 << shift)
2669 isr_txdmaok(info->port_array[i]);
2670 }
2671
2672 if (timerstatus0 & (BIT5 | BIT4))
2673 isr_timer(info->port_array[0]);
2674 if (timerstatus0 & (BIT7 | BIT6))
2675 isr_timer(info->port_array[1]);
2676 if (timerstatus1 & (BIT5 | BIT4))
2677 isr_timer(info->port_array[2]);
2678 if (timerstatus1 & (BIT7 | BIT6))
2679 isr_timer(info->port_array[3]);
2680 }
2681
2682 for(i=0; i < info->port_count ; i++) {
2683 SLMP_INFO * port = info->port_array[i];
2684
2685 /* Request bottom half processing if there's something
2686 * for it to do and the bh is not already running.
2687 *
2688 * Note: startup adapter diags require interrupts.
2689 * do not request bottom half processing if the
2690 * device is not open in a normal mode.
2691 */
2692 if ( port && (port->count || port->netcount) &&
2693 port->pending_bh && !port->bh_running &&
2694 !port->bh_requested ) {
2695 if ( debug_level >= DEBUG_LEVEL_ISR )
2696 printk("%s(%d):%s queueing bh task.\n",
2697 __FILE__,__LINE__,port->device_name);
2698 schedule_work(&port->task);
2699 port->bh_requested = 1;
2700 }
2701 }
2702
2703 spin_unlock(&info->lock);
2704
2705 if ( debug_level >= DEBUG_LEVEL_ISR )
2706 printk("%s(%d):synclinkmp_interrupt(%d)exit.\n",
2707 __FILE__,__LINE__,irq);
2708 return IRQ_HANDLED;
2709 }
2710
2711 /* Initialize and start device.
2712 */
2713 static int startup(SLMP_INFO * info)
2714 {
2715 if ( debug_level >= DEBUG_LEVEL_INFO )
2716 printk("%s(%d):%s tx_releaseup()\n",__FILE__,__LINE__,info->device_name);
2717
2718 if (info->flags & ASYNC_INITIALIZED)
2719 return 0;
2720
2721 if (!info->tx_buf) {
2722 info->tx_buf = kmalloc(info->max_frame_size, GFP_KERNEL);
2723 if (!info->tx_buf) {
2724 printk(KERN_ERR"%s(%d):%s can't allocate transmit buffer\n",
2725 __FILE__,__LINE__,info->device_name);
2726 return -ENOMEM;
2727 }
2728 }
2729
2730 info->pending_bh = 0;
2731
2732 memset(&info->icount, 0, sizeof(info->icount));
2733
2734 /* program hardware for current parameters */
2735 reset_port(info);
2736
2737 change_params(info);
2738
2739 mod_timer(&info->status_timer, jiffies + msecs_to_jiffies(10));
2740
2741 if (info->tty)
2742 clear_bit(TTY_IO_ERROR, &info->tty->flags);
2743
2744 info->flags |= ASYNC_INITIALIZED;
2745
2746 return 0;
2747 }
2748
2749 /* Called by close() and hangup() to shutdown hardware
2750 */
2751 static void shutdown(SLMP_INFO * info)
2752 {
2753 unsigned long flags;
2754
2755 if (!(info->flags & ASYNC_INITIALIZED))
2756 return;
2757
2758 if (debug_level >= DEBUG_LEVEL_INFO)
2759 printk("%s(%d):%s synclinkmp_shutdown()\n",
2760 __FILE__,__LINE__, info->device_name );
2761
2762 /* clear status wait queue because status changes */
2763 /* can't happen after shutting down the hardware */
2764 wake_up_interruptible(&info->status_event_wait_q);
2765 wake_up_interruptible(&info->event_wait_q);
2766
2767 del_timer(&info->tx_timer);
2768 del_timer(&info->status_timer);
2769
2770 kfree(info->tx_buf);
2771 info->tx_buf = NULL;
2772
2773 spin_lock_irqsave(&info->lock,flags);
2774
2775 reset_port(info);
2776
2777 if (!info->tty || info->tty->termios->c_cflag & HUPCL) {
2778 info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
2779 set_signals(info);
2780 }
2781
2782 spin_unlock_irqrestore(&info->lock,flags);
2783
2784 if (info->tty)
2785 set_bit(TTY_IO_ERROR, &info->tty->flags);
2786
2787 info->flags &= ~ASYNC_INITIALIZED;
2788 }
2789
2790 static void program_hw(SLMP_INFO *info)
2791 {
2792 unsigned long flags;
2793
2794 spin_lock_irqsave(&info->lock,flags);
2795
2796 rx_stop(info);
2797 tx_stop(info);
2798
2799 info->tx_count = info->tx_put = info->tx_get = 0;
2800
2801 if (info->params.mode == MGSL_MODE_HDLC || info->netcount)
2802 hdlc_mode(info);
2803 else
2804 async_mode(info);
2805
2806 set_signals(info);
2807
2808 info->dcd_chkcount = 0;
2809 info->cts_chkcount = 0;
2810 info->ri_chkcount = 0;
2811 info->dsr_chkcount = 0;
2812
2813 info->ie1_value |= (CDCD|CCTS);
2814 write_reg(info, IE1, info->ie1_value);
2815
2816 get_signals(info);
2817
2818 if (info->netcount || (info->tty && info->tty->termios->c_cflag & CREAD) )
2819 rx_start(info);
2820
2821 spin_unlock_irqrestore(&info->lock,flags);
2822 }
2823
2824 /* Reconfigure adapter based on new parameters
2825 */
2826 static void change_params(SLMP_INFO *info)
2827 {
2828 unsigned cflag;
2829 int bits_per_char;
2830
2831 if (!info->tty || !info->tty->termios)
2832 return;
2833
2834 if (debug_level >= DEBUG_LEVEL_INFO)
2835 printk("%s(%d):%s change_params()\n",
2836 __FILE__,__LINE__, info->device_name );
2837
2838 cflag = info->tty->termios->c_cflag;
2839
2840 /* if B0 rate (hangup) specified then negate DTR and RTS */
2841 /* otherwise assert DTR and RTS */
2842 if (cflag & CBAUD)
2843 info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
2844 else
2845 info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
2846
2847 /* byte size and parity */
2848
2849 switch (cflag & CSIZE) {
2850 case CS5: info->params.data_bits = 5; break;
2851 case CS6: info->params.data_bits = 6; break;
2852 case CS7: info->params.data_bits = 7; break;
2853 case CS8: info->params.data_bits = 8; break;
2854 /* Never happens, but GCC is too dumb to figure it out */
2855 default: info->params.data_bits = 7; break;
2856 }
2857
2858 if (cflag & CSTOPB)
2859 info->params.stop_bits = 2;
2860 else
2861 info->params.stop_bits = 1;
2862
2863 info->params.parity = ASYNC_PARITY_NONE;
2864 if (cflag & PARENB) {
2865 if (cflag & PARODD)
2866 info->params.parity = ASYNC_PARITY_ODD;
2867 else
2868 info->params.parity = ASYNC_PARITY_EVEN;
2869 #ifdef CMSPAR
2870 if (cflag & CMSPAR)
2871 info->params.parity = ASYNC_PARITY_SPACE;
2872 #endif
2873 }
2874
2875 /* calculate number of jiffies to transmit a full
2876 * FIFO (32 bytes) at specified data rate
2877 */
2878 bits_per_char = info->params.data_bits +
2879 info->params.stop_bits + 1;
2880
2881 /* if port data rate is set to 460800 or less then
2882 * allow tty settings to override, otherwise keep the
2883 * current data rate.
2884 */
2885 if (info->params.data_rate <= 460800) {
2886 info->params.data_rate = tty_get_baud_rate(info->tty);
2887 }
2888
2889 if ( info->params.data_rate ) {
2890 info->timeout = (32*HZ*bits_per_char) /
2891 info->params.data_rate;
2892 }
2893 info->timeout += HZ/50; /* Add .02 seconds of slop */
2894
2895 if (cflag & CRTSCTS)
2896 info->flags |= ASYNC_CTS_FLOW;
2897 else
2898 info->flags &= ~ASYNC_CTS_FLOW;
2899
2900 if (cflag & CLOCAL)
2901 info->flags &= ~ASYNC_CHECK_CD;
2902 else
2903 info->flags |= ASYNC_CHECK_CD;
2904
2905 /* process tty input control flags */
2906
2907 info->read_status_mask2 = OVRN;
2908 if (I_INPCK(info->tty))
2909 info->read_status_mask2 |= PE | FRME;
2910 if (I_BRKINT(info->tty) || I_PARMRK(info->tty))
2911 info->read_status_mask1 |= BRKD;
2912 if (I_IGNPAR(info->tty))
2913 info->ignore_status_mask2 |= PE | FRME;
2914 if (I_IGNBRK(info->tty)) {
2915 info->ignore_status_mask1 |= BRKD;
2916 /* If ignoring parity and break indicators, ignore
2917 * overruns too. (For real raw support).
2918 */
2919 if (I_IGNPAR(info->tty))
2920 info->ignore_status_mask2 |= OVRN;
2921 }
2922
2923 program_hw(info);
2924 }
2925
2926 static int get_stats(SLMP_INFO * info, struct mgsl_icount __user *user_icount)
2927 {
2928 int err;
2929
2930 if (debug_level >= DEBUG_LEVEL_INFO)
2931 printk("%s(%d):%s get_params()\n",
2932 __FILE__,__LINE__, info->device_name);
2933
2934 if (!user_icount) {
2935 memset(&info->icount, 0, sizeof(info->icount));
2936 } else {
2937 COPY_TO_USER(err, user_icount, &info->icount, sizeof(struct mgsl_icount));
2938 if (err)
2939 return -EFAULT;
2940 }
2941
2942 return 0;
2943 }
2944
2945 static int get_params(SLMP_INFO * info, MGSL_PARAMS __user *user_params)
2946 {
2947 int err;
2948 if (debug_level >= DEBUG_LEVEL_INFO)
2949 printk("%s(%d):%s get_params()\n",
2950 __FILE__,__LINE__, info->device_name);
2951
2952 COPY_TO_USER(err,user_params, &info->params, sizeof(MGSL_PARAMS));
2953 if (err) {
2954 if ( debug_level >= DEBUG_LEVEL_INFO )
2955 printk( "%s(%d):%s get_params() user buffer copy failed\n",
2956 __FILE__,__LINE__,info->device_name);
2957 return -EFAULT;
2958 }
2959
2960 return 0;
2961 }
2962
2963 static int set_params(SLMP_INFO * info, MGSL_PARAMS __user *new_params)
2964 {
2965 unsigned long flags;
2966 MGSL_PARAMS tmp_params;
2967 int err;
2968
2969 if (debug_level >= DEBUG_LEVEL_INFO)
2970 printk("%s(%d):%s set_params\n",
2971 __FILE__,__LINE__,info->device_name );
2972 COPY_FROM_USER(err,&tmp_params, new_params, sizeof(MGSL_PARAMS));
2973 if (err) {
2974 if ( debug_level >= DEBUG_LEVEL_INFO )
2975 printk( "%s(%d):%s set_params() user buffer copy failed\n",
2976 __FILE__,__LINE__,info->device_name);
2977 return -EFAULT;
2978 }
2979
2980 spin_lock_irqsave(&info->lock,flags);
2981 memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS));
2982 spin_unlock_irqrestore(&info->lock,flags);
2983
2984 change_params(info);
2985
2986 return 0;
2987 }
2988
2989 static int get_txidle(SLMP_INFO * info, int __user *idle_mode)
2990 {
2991 int err;
2992
2993 if (debug_level >= DEBUG_LEVEL_INFO)
2994 printk("%s(%d):%s get_txidle()=%d\n",
2995 __FILE__,__LINE__, info->device_name, info->idle_mode);
2996
2997 COPY_TO_USER(err,idle_mode, &info->idle_mode, sizeof(int));
2998 if (err) {
2999 if ( debug_level >= DEBUG_LEVEL_INFO )
3000 printk( "%s(%d):%s get_txidle() user buffer copy failed\n",
3001 __FILE__,__LINE__,info->device_name);
3002 return -EFAULT;
3003 }
3004
3005 return 0;
3006 }
3007
3008 static int set_txidle(SLMP_INFO * info, int idle_mode)
3009 {
3010 unsigned long flags;
3011
3012 if (debug_level >= DEBUG_LEVEL_INFO)
3013 printk("%s(%d):%s set_txidle(%d)\n",
3014 __FILE__,__LINE__,info->device_name, idle_mode );
3015
3016 spin_lock_irqsave(&info->lock,flags);
3017 info->idle_mode = idle_mode;
3018 tx_set_idle( info );
3019 spin_unlock_irqrestore(&info->lock,flags);
3020 return 0;
3021 }
3022
3023 static int tx_enable(SLMP_INFO * info, int enable)
3024 {
3025 unsigned long flags;
3026
3027 if (debug_level >= DEBUG_LEVEL_INFO)
3028 printk("%s(%d):%s tx_enable(%d)\n",
3029 __FILE__,__LINE__,info->device_name, enable);
3030
3031 spin_lock_irqsave(&info->lock,flags);
3032 if ( enable ) {
3033 if ( !info->tx_enabled ) {
3034 tx_start(info);
3035 }
3036 } else {
3037 if ( info->tx_enabled )
3038 tx_stop(info);
3039 }
3040 spin_unlock_irqrestore(&info->lock,flags);
3041 return 0;
3042 }
3043
3044 /* abort send HDLC frame
3045 */
3046 static int tx_abort(SLMP_INFO * info)
3047 {
3048 unsigned long flags;
3049
3050 if (debug_level >= DEBUG_LEVEL_INFO)
3051 printk("%s(%d):%s tx_abort()\n",
3052 __FILE__,__LINE__,info->device_name);
3053
3054 spin_lock_irqsave(&info->lock,flags);
3055 if ( info->tx_active && info->params.mode == MGSL_MODE_HDLC ) {
3056 info->ie1_value &= ~UDRN;
3057 info->ie1_value |= IDLE;
3058 write_reg(info, IE1, info->ie1_value); /* disable tx status interrupts */
3059 write_reg(info, SR1, (unsigned char)(IDLE + UDRN)); /* clear pending */
3060
3061 write_reg(info, TXDMA + DSR, 0); /* disable DMA channel */
3062 write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
3063
3064 write_reg(info, CMD, TXABORT);
3065 }
3066 spin_unlock_irqrestore(&info->lock,flags);
3067 return 0;
3068 }
3069
3070 static int rx_enable(SLMP_INFO * info, int enable)
3071 {
3072 unsigned long flags;
3073
3074 if (debug_level >= DEBUG_LEVEL_INFO)
3075 printk("%s(%d):%s rx_enable(%d)\n",
3076 __FILE__,__LINE__,info->device_name,enable);
3077
3078 spin_lock_irqsave(&info->lock,flags);
3079 if ( enable ) {
3080 if ( !info->rx_enabled )
3081 rx_start(info);
3082 } else {
3083 if ( info->rx_enabled )
3084 rx_stop(info);
3085 }
3086 spin_unlock_irqrestore(&info->lock,flags);
3087 return 0;
3088 }
3089
3090 /* wait for specified event to occur
3091 */
3092 static int wait_mgsl_event(SLMP_INFO * info, int __user *mask_ptr)
3093 {
3094 unsigned long flags;
3095 int s;
3096 int rc=0;
3097 struct mgsl_icount cprev, cnow;
3098 int events;
3099 int mask;
3100 struct _input_signal_events oldsigs, newsigs;
3101 DECLARE_WAITQUEUE(wait, current);
3102
3103 COPY_FROM_USER(rc,&mask, mask_ptr, sizeof(int));
3104 if (rc) {
3105 return -EFAULT;
3106 }
3107
3108 if (debug_level >= DEBUG_LEVEL_INFO)
3109 printk("%s(%d):%s wait_mgsl_event(%d)\n",
3110 __FILE__,__LINE__,info->device_name,mask);
3111
3112 spin_lock_irqsave(&info->lock,flags);
3113
3114 /* return immediately if state matches requested events */
3115 get_signals(info);
3116 s = info->serial_signals;
3117
3118 events = mask &
3119 ( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) +
3120 ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) +
3121 ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) +
3122 ((s & SerialSignal_RI) ? MgslEvent_RiActive :MgslEvent_RiInactive) );
3123 if (events) {
3124 spin_unlock_irqrestore(&info->lock,flags);
3125 goto exit;
3126 }
3127
3128 /* save current irq counts */
3129 cprev = info->icount;
3130 oldsigs = info->input_signal_events;
3131
3132 /* enable hunt and idle irqs if needed */
3133 if (mask & (MgslEvent_ExitHuntMode+MgslEvent_IdleReceived)) {
3134 unsigned char oldval = info->ie1_value;
3135 unsigned char newval = oldval +
3136 (mask & MgslEvent_ExitHuntMode ? FLGD:0) +
3137 (mask & MgslEvent_IdleReceived ? IDLD:0);
3138 if ( oldval != newval ) {
3139 info->ie1_value = newval;
3140 write_reg(info, IE1, info->ie1_value);
3141 }
3142 }
3143
3144 set_current_state(TASK_INTERRUPTIBLE);
3145 add_wait_queue(&info->event_wait_q, &wait);
3146
3147 spin_unlock_irqrestore(&info->lock,flags);
3148
3149 for(;;) {
3150 schedule();
3151 if (signal_pending(current)) {
3152 rc = -ERESTARTSYS;
3153 break;
3154 }
3155
3156 /* get current irq counts */
3157 spin_lock_irqsave(&info->lock,flags);
3158 cnow = info->icount;
3159 newsigs = info->input_signal_events;
3160 set_current_state(TASK_INTERRUPTIBLE);
3161 spin_unlock_irqrestore(&info->lock,flags);
3162
3163 /* if no change, wait aborted for some reason */
3164 if (newsigs.dsr_up == oldsigs.dsr_up &&
3165 newsigs.dsr_down == oldsigs.dsr_down &&
3166 newsigs.dcd_up == oldsigs.dcd_up &&
3167 newsigs.dcd_down == oldsigs.dcd_down &&
3168 newsigs.cts_up == oldsigs.cts_up &&
3169 newsigs.cts_down == oldsigs.cts_down &&
3170 newsigs.ri_up == oldsigs.ri_up &&
3171 newsigs.ri_down == oldsigs.ri_down &&
3172 cnow.exithunt == cprev.exithunt &&
3173 cnow.rxidle == cprev.rxidle) {
3174 rc = -EIO;
3175 break;
3176 }
3177
3178 events = mask &
3179 ( (newsigs.dsr_up != oldsigs.dsr_up ? MgslEvent_DsrActive:0) +
3180 (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) +
3181 (newsigs.dcd_up != oldsigs.dcd_up ? MgslEvent_DcdActive:0) +
3182 (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) +
3183 (newsigs.cts_up != oldsigs.cts_up ? MgslEvent_CtsActive:0) +
3184 (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) +
3185 (newsigs.ri_up != oldsigs.ri_up ? MgslEvent_RiActive:0) +
3186 (newsigs.ri_down != oldsigs.ri_down ? MgslEvent_RiInactive:0) +
3187 (cnow.exithunt != cprev.exithunt ? MgslEvent_ExitHuntMode:0) +
3188 (cnow.rxidle != cprev.rxidle ? MgslEvent_IdleReceived:0) );
3189 if (events)
3190 break;
3191
3192 cprev = cnow;
3193 oldsigs = newsigs;
3194 }
3195
3196 remove_wait_queue(&info->event_wait_q, &wait);
3197 set_current_state(TASK_RUNNING);
3198
3199
3200 if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) {
3201 spin_lock_irqsave(&info->lock,flags);
3202 if (!waitqueue_active(&info->event_wait_q)) {
3203 /* disable enable exit hunt mode/idle rcvd IRQs */
3204 info->ie1_value &= ~(FLGD|IDLD);
3205 write_reg(info, IE1, info->ie1_value);
3206 }
3207 spin_unlock_irqrestore(&info->lock,flags);
3208 }
3209 exit:
3210 if ( rc == 0 )
3211 PUT_USER(rc, events, mask_ptr);
3212
3213 return rc;
3214 }
3215
3216 static int modem_input_wait(SLMP_INFO *info,int arg)
3217 {
3218 unsigned long flags;
3219 int rc;
3220 struct mgsl_icount cprev, cnow;
3221 DECLARE_WAITQUEUE(wait, current);
3222
3223 /* save current irq counts */
3224 spin_lock_irqsave(&info->lock,flags);
3225 cprev = info->icount;
3226 add_wait_queue(&info->status_event_wait_q, &wait);
3227 set_current_state(TASK_INTERRUPTIBLE);
3228 spin_unlock_irqrestore(&info->lock,flags);
3229
3230 for(;;) {
3231 schedule();
3232 if (signal_pending(current)) {
3233 rc = -ERESTARTSYS;
3234 break;
3235 }
3236
3237 /* get new irq counts */
3238 spin_lock_irqsave(&info->lock,flags);
3239 cnow = info->icount;
3240 set_current_state(TASK_INTERRUPTIBLE);
3241 spin_unlock_irqrestore(&info->lock,flags);
3242
3243 /* if no change, wait aborted for some reason */
3244 if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
3245 cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) {
3246 rc = -EIO;
3247 break;
3248 }
3249
3250 /* check for change in caller specified modem input */
3251 if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) ||
3252 (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) ||
3253 (arg & TIOCM_CD && cnow.dcd != cprev.dcd) ||
3254 (arg & TIOCM_CTS && cnow.cts != cprev.cts)) {
3255 rc = 0;
3256 break;
3257 }
3258
3259 cprev = cnow;
3260 }
3261 remove_wait_queue(&info->status_event_wait_q, &wait);
3262 set_current_state(TASK_RUNNING);
3263 return rc;
3264 }
3265
3266 /* return the state of the serial control and status signals
3267 */
3268 static int tiocmget(struct tty_struct *tty, struct file *file)
3269 {
3270 SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
3271 unsigned int result;
3272 unsigned long flags;
3273
3274 spin_lock_irqsave(&info->lock,flags);
3275 get_signals(info);
3276 spin_unlock_irqrestore(&info->lock,flags);
3277
3278 result = ((info->serial_signals & SerialSignal_RTS) ? TIOCM_RTS:0) +
3279 ((info->serial_signals & SerialSignal_DTR) ? TIOCM_DTR:0) +
3280 ((info->serial_signals & SerialSignal_DCD) ? TIOCM_CAR:0) +
3281 ((info->serial_signals & SerialSignal_RI) ? TIOCM_RNG:0) +
3282 ((info->serial_signals & SerialSignal_DSR) ? TIOCM_DSR:0) +
3283 ((info->serial_signals & SerialSignal_CTS) ? TIOCM_CTS:0);
3284
3285 if (debug_level >= DEBUG_LEVEL_INFO)
3286 printk("%s(%d):%s tiocmget() value=%08X\n",
3287 __FILE__,__LINE__, info->device_name, result );
3288 return result;
3289 }
3290
3291 /* set modem control signals (DTR/RTS)
3292 */
3293 static int tiocmset(struct tty_struct *tty, struct file *file,
3294 unsigned int set, unsigned int clear)
3295 {
3296 SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
3297 unsigned long flags;
3298
3299 if (debug_level >= DEBUG_LEVEL_INFO)
3300 printk("%s(%d):%s tiocmset(%x,%x)\n",
3301 __FILE__,__LINE__,info->device_name, set, clear);
3302
3303 if (set & TIOCM_RTS)
3304 info->serial_signals |= SerialSignal_RTS;
3305 if (set & TIOCM_DTR)
3306 info->serial_signals |= SerialSignal_DTR;
3307 if (clear & TIOCM_RTS)
3308 info->serial_signals &= ~SerialSignal_RTS;
3309 if (clear & TIOCM_DTR)
3310 info->serial_signals &= ~SerialSignal_DTR;
3311
3312 spin_lock_irqsave(&info->lock,flags);
3313 set_signals(info);
3314 spin_unlock_irqrestore(&info->lock,flags);
3315
3316 return 0;
3317 }
3318
3319
3320
3321 /* Block the current process until the specified port is ready to open.
3322 */
3323 static int block_til_ready(struct tty_struct *tty, struct file *filp,
3324 SLMP_INFO *info)
3325 {
3326 DECLARE_WAITQUEUE(wait, current);
3327 int retval;
3328 int do_clocal = 0, extra_count = 0;
3329 unsigned long flags;
3330
3331 if (debug_level >= DEBUG_LEVEL_INFO)
3332 printk("%s(%d):%s block_til_ready()\n",
3333 __FILE__,__LINE__, tty->driver->name );
3334
3335 if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){
3336 /* nonblock mode is set or port is not enabled */
3337 /* just verify that callout device is not active */
3338 info->flags |= ASYNC_NORMAL_ACTIVE;
3339 return 0;
3340 }
3341
3342 if (tty->termios->c_cflag & CLOCAL)
3343 do_clocal = 1;
3344
3345 /* Wait for carrier detect and the line to become
3346 * free (i.e., not in use by the callout). While we are in
3347 * this loop, info->count is dropped by one, so that
3348 * close() knows when to free things. We restore it upon
3349 * exit, either normal or abnormal.
3350 */
3351
3352 retval = 0;
3353 add_wait_queue(&info->open_wait, &wait);
3354
3355 if (debug_level >= DEBUG_LEVEL_INFO)
3356 printk("%s(%d):%s block_til_ready() before block, count=%d\n",
3357 __FILE__,__LINE__, tty->driver->name, info->count );
3358
3359 spin_lock_irqsave(&info->lock, flags);
3360 if (!tty_hung_up_p(filp)) {
3361 extra_count = 1;
3362 info->count--;
3363 }
3364 spin_unlock_irqrestore(&info->lock, flags);
3365 info->blocked_open++;
3366
3367 while (1) {
3368 if ((tty->termios->c_cflag & CBAUD)) {
3369 spin_lock_irqsave(&info->lock,flags);
3370 info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
3371 set_signals(info);
3372 spin_unlock_irqrestore(&info->lock,flags);
3373 }
3374
3375 set_current_state(TASK_INTERRUPTIBLE);
3376
3377 if (tty_hung_up_p(filp) || !(info->flags & ASYNC_INITIALIZED)){
3378 retval = (info->flags & ASYNC_HUP_NOTIFY) ?
3379 -EAGAIN : -ERESTARTSYS;
3380 break;
3381 }
3382
3383 spin_lock_irqsave(&info->lock,flags);
3384 get_signals(info);
3385 spin_unlock_irqrestore(&info->lock,flags);
3386
3387 if (!(info->flags & ASYNC_CLOSING) &&
3388 (do_clocal || (info->serial_signals & SerialSignal_DCD)) ) {
3389 break;
3390 }
3391
3392 if (signal_pending(current)) {
3393 retval = -ERESTARTSYS;
3394 break;
3395 }
3396
3397 if (debug_level >= DEBUG_LEVEL_INFO)
3398 printk("%s(%d):%s block_til_ready() count=%d\n",
3399 __FILE__,__LINE__, tty->driver->name, info->count );
3400
3401 schedule();
3402 }
3403
3404 set_current_state(TASK_RUNNING);
3405 remove_wait_queue(&info->open_wait, &wait);
3406
3407 if (extra_count)
3408 info->count++;
3409 info->blocked_open--;
3410
3411 if (debug_level >= DEBUG_LEVEL_INFO)
3412 printk("%s(%d):%s block_til_ready() after, count=%d\n",
3413 __FILE__,__LINE__, tty->driver->name, info->count );
3414
3415 if (!retval)
3416 info->flags |= ASYNC_NORMAL_ACTIVE;
3417
3418 return retval;
3419 }
3420
3421 int alloc_dma_bufs(SLMP_INFO *info)
3422 {
3423 unsigned short BuffersPerFrame;
3424 unsigned short BufferCount;
3425
3426 // Force allocation to start at 64K boundary for each port.
3427 // This is necessary because *all* buffer descriptors for a port
3428 // *must* be in the same 64K block. All descriptors on a port
3429 // share a common 'base' address (upper 8 bits of 24 bits) programmed
3430 // into the CBP register.
3431 info->port_array[0]->last_mem_alloc = (SCA_MEM_SIZE/4) * info->port_num;
3432
3433 /* Calculate the number of DMA buffers necessary to hold the */
3434 /* largest allowable frame size. Note: If the max frame size is */
3435 /* not an even multiple of the DMA buffer size then we need to */
3436 /* round the buffer count per frame up one. */
3437
3438 BuffersPerFrame = (unsigned short)(info->max_frame_size/SCABUFSIZE);
3439 if ( info->max_frame_size % SCABUFSIZE )
3440 BuffersPerFrame++;
3441
3442 /* calculate total number of data buffers (SCABUFSIZE) possible
3443 * in one ports memory (SCA_MEM_SIZE/4) after allocating memory
3444 * for the descriptor list (BUFFERLISTSIZE).
3445 */
3446 BufferCount = (SCA_MEM_SIZE/4 - BUFFERLISTSIZE)/SCABUFSIZE;
3447
3448 /* limit number of buffers to maximum amount of descriptors */
3449 if (BufferCount > BUFFERLISTSIZE/sizeof(SCADESC))
3450 BufferCount = BUFFERLISTSIZE/sizeof(SCADESC);
3451
3452 /* use enough buffers to transmit one max size frame */
3453 info->tx_buf_count = BuffersPerFrame + 1;
3454
3455 /* never use more than half the available buffers for transmit */
3456 if (info->tx_buf_count > (BufferCount/2))
3457 info->tx_buf_count = BufferCount/2;
3458
3459 if (info->tx_buf_count > SCAMAXDESC)
3460 info->tx_buf_count = SCAMAXDESC;
3461
3462 /* use remaining buffers for receive */
3463 info->rx_buf_count = BufferCount - info->tx_buf_count;
3464
3465 if (info->rx_buf_count > SCAMAXDESC)
3466 info->rx_buf_count = SCAMAXDESC;
3467
3468 if ( debug_level >= DEBUG_LEVEL_INFO )
3469 printk("%s(%d):%s Allocating %d TX and %d RX DMA buffers.\n",
3470 __FILE__,__LINE__, info->device_name,
3471 info->tx_buf_count,info->rx_buf_count);
3472
3473 if ( alloc_buf_list( info ) < 0 ||
3474 alloc_frame_bufs(info,
3475 info->rx_buf_list,
3476 info->rx_buf_list_ex,
3477 info->rx_buf_count) < 0 ||
3478 alloc_frame_bufs(info,
3479 info->tx_buf_list,
3480 info->tx_buf_list_ex,
3481 info->tx_buf_count) < 0 ||
3482 alloc_tmp_rx_buf(info) < 0 ) {
3483 printk("%s(%d):%s Can't allocate DMA buffer memory\n",
3484 __FILE__,__LINE__, info->device_name);
3485 return -ENOMEM;
3486 }
3487
3488 rx_reset_buffers( info );
3489
3490 return 0;
3491 }
3492
3493 /* Allocate DMA buffers for the transmit and receive descriptor lists.
3494 */
3495 int alloc_buf_list(SLMP_INFO *info)
3496 {
3497 unsigned int i;
3498
3499 /* build list in adapter shared memory */
3500 info->buffer_list = info->memory_base + info->port_array[0]->last_mem_alloc;
3501 info->buffer_list_phys = info->port_array[0]->last_mem_alloc;
3502 info->port_array[0]->last_mem_alloc += BUFFERLISTSIZE;
3503
3504 memset(info->buffer_list, 0, BUFFERLISTSIZE);
3505
3506 /* Save virtual address pointers to the receive and */
3507 /* transmit buffer lists. (Receive 1st). These pointers will */
3508 /* be used by the processor to access the lists. */
3509 info->rx_buf_list = (SCADESC *)info->buffer_list;
3510
3511 info->tx_buf_list = (SCADESC *)info->buffer_list;
3512 info->tx_buf_list += info->rx_buf_count;
3513
3514 /* Build links for circular buffer entry lists (tx and rx)
3515 *
3516 * Note: links are physical addresses read by the SCA device
3517 * to determine the next buffer entry to use.
3518 */
3519
3520 for ( i = 0; i < info->rx_buf_count; i++ ) {
3521 /* calculate and store physical address of this buffer entry */
3522 info->rx_buf_list_ex[i].phys_entry =
3523 info->buffer_list_phys + (i * sizeof(SCABUFSIZE));
3524
3525 /* calculate and store physical address of */
3526 /* next entry in cirular list of entries */
3527 info->rx_buf_list[i].next = info->buffer_list_phys;
3528 if ( i < info->rx_buf_count - 1 )
3529 info->rx_buf_list[i].next += (i + 1) * sizeof(SCADESC);
3530
3531 info->rx_buf_list[i].length = SCABUFSIZE;
3532 }
3533
3534 for ( i = 0; i < info->tx_buf_count; i++ ) {
3535 /* calculate and store physical address of this buffer entry */
3536 info->tx_buf_list_ex[i].phys_entry = info->buffer_list_phys +
3537 ((info->rx_buf_count + i) * sizeof(SCADESC));
3538
3539 /* calculate and store physical address of */
3540 /* next entry in cirular list of entries */
3541
3542 info->tx_buf_list[i].next = info->buffer_list_phys +
3543 info->rx_buf_count * sizeof(SCADESC);
3544
3545 if ( i < info->tx_buf_count - 1 )
3546 info->tx_buf_list[i].next += (i + 1) * sizeof(SCADESC);
3547 }
3548
3549 return 0;
3550 }
3551
3552 /* Allocate the frame DMA buffers used by the specified buffer list.
3553 */
3554 int alloc_frame_bufs(SLMP_INFO *info, SCADESC *buf_list,SCADESC_EX *buf_list_ex,int count)
3555 {
3556 int i;
3557 unsigned long phys_addr;
3558
3559 for ( i = 0; i < count; i++ ) {
3560 buf_list_ex[i].virt_addr = info->memory_base + info->port_array[0]->last_mem_alloc;
3561 phys_addr = info->port_array[0]->last_mem_alloc;
3562 info->port_array[0]->last_mem_alloc += SCABUFSIZE;
3563
3564 buf_list[i].buf_ptr = (unsigned short)phys_addr;
3565 buf_list[i].buf_base = (unsigned char)(phys_addr >> 16);
3566 }
3567
3568 return 0;
3569 }
3570
3571 void free_dma_bufs(SLMP_INFO *info)
3572 {
3573 info->buffer_list = NULL;
3574 info->rx_buf_list = NULL;
3575 info->tx_buf_list = NULL;
3576 }
3577
3578 /* allocate buffer large enough to hold max_frame_size.
3579 * This buffer is used to pass an assembled frame to the line discipline.
3580 */
3581 int alloc_tmp_rx_buf(SLMP_INFO *info)
3582 {
3583 info->tmp_rx_buf = kmalloc(info->max_frame_size, GFP_KERNEL);
3584 if (info->tmp_rx_buf == NULL)
3585 return -ENOMEM;
3586 return 0;
3587 }
3588
3589 void free_tmp_rx_buf(SLMP_INFO *info)
3590 {
3591 kfree(info->tmp_rx_buf);
3592 info->tmp_rx_buf = NULL;
3593 }
3594
3595 int claim_resources(SLMP_INFO *info)
3596 {
3597 if (request_mem_region(info->phys_memory_base,SCA_MEM_SIZE,"synclinkmp") == NULL) {
3598 printk( "%s(%d):%s mem addr conflict, Addr=%08X\n",
3599 __FILE__,__LINE__,info->device_name, info->phys_memory_base);
3600 info->init_error = DiagStatus_AddressConflict;
3601 goto errout;
3602 }
3603 else
3604 info->shared_mem_requested = 1;
3605
3606 if (request_mem_region(info->phys_lcr_base + info->lcr_offset,128,"synclinkmp") == NULL) {
3607 printk( "%s(%d):%s lcr mem addr conflict, Addr=%08X\n",
3608 __FILE__,__LINE__,info->device_name, info->phys_lcr_base);
3609 info->init_error = DiagStatus_AddressConflict;
3610 goto errout;
3611 }
3612 else
3613 info->lcr_mem_requested = 1;
3614
3615 if (request_mem_region(info->phys_sca_base + info->sca_offset,SCA_BASE_SIZE,"synclinkmp") == NULL) {
3616 printk( "%s(%d):%s sca mem addr conflict, Addr=%08X\n",
3617 __FILE__,__LINE__,info->device_name, info->phys_sca_base);
3618 info->init_error = DiagStatus_AddressConflict;
3619 goto errout;
3620 }
3621 else
3622 info->sca_base_requested = 1;
3623
3624 if (request_mem_region(info->phys_statctrl_base + info->statctrl_offset,SCA_REG_SIZE,"synclinkmp") == NULL) {
3625 printk( "%s(%d):%s stat/ctrl mem addr conflict, Addr=%08X\n",
3626 __FILE__,__LINE__,info->device_name, info->phys_statctrl_base);
3627 info->init_error = DiagStatus_AddressConflict;
3628 goto errout;
3629 }
3630 else
3631 info->sca_statctrl_requested = 1;
3632
3633 info->memory_base = ioremap(info->phys_memory_base,SCA_MEM_SIZE);
3634 if (!info->memory_base) {
3635 printk( "%s(%d):%s Cant map shared memory, MemAddr=%08X\n",
3636 __FILE__,__LINE__,info->device_name, info->phys_memory_base );
3637 info->init_error = DiagStatus_CantAssignPciResources;
3638 goto errout;
3639 }
3640
3641 info->lcr_base = ioremap(info->phys_lcr_base,PAGE_SIZE);
3642 if (!info->lcr_base) {
3643 printk( "%s(%d):%s Cant map LCR memory, MemAddr=%08X\n",
3644 __FILE__,__LINE__,info->device_name, info->phys_lcr_base );
3645 info->init_error = DiagStatus_CantAssignPciResources;
3646 goto errout;
3647 }
3648 info->lcr_base += info->lcr_offset;
3649
3650 info->sca_base = ioremap(info->phys_sca_base,PAGE_SIZE);
3651 if (!info->sca_base) {
3652 printk( "%s(%d):%s Cant map SCA memory, MemAddr=%08X\n",
3653 __FILE__,__LINE__,info->device_name, info->phys_sca_base );
3654 info->init_error = DiagStatus_CantAssignPciResources;
3655 goto errout;
3656 }
3657 info->sca_base += info->sca_offset;
3658
3659 info->statctrl_base = ioremap(info->phys_statctrl_base,PAGE_SIZE);
3660 if (!info->statctrl_base) {
3661 printk( "%s(%d):%s Cant map SCA Status/Control memory, MemAddr=%08X\n",
3662 __FILE__,__LINE__,info->device_name, info->phys_statctrl_base );
3663 info->init_error = DiagStatus_CantAssignPciResources;
3664 goto errout;
3665 }
3666 info->statctrl_base += info->statctrl_offset;
3667
3668 if ( !memory_test(info) ) {
3669 printk( "%s(%d):Shared Memory Test failed for device %s MemAddr=%08X\n",
3670 __FILE__,__LINE__,info->device_name, info->phys_memory_base );
3671 info->init_error = DiagStatus_MemoryError;
3672 goto errout;
3673 }
3674
3675 return 0;
3676
3677 errout:
3678 release_resources( info );
3679 return -ENODEV;
3680 }
3681
3682 void release_resources(SLMP_INFO *info)
3683 {
3684 if ( debug_level >= DEBUG_LEVEL_INFO )
3685 printk( "%s(%d):%s release_resources() entry\n",
3686 __FILE__,__LINE__,info->device_name );
3687
3688 if ( info->irq_requested ) {
3689 free_irq(info->irq_level, info);
3690 info->irq_requested = 0;
3691 }
3692
3693 if ( info->shared_mem_requested ) {
3694 release_mem_region(info->phys_memory_base,SCA_MEM_SIZE);
3695 info->shared_mem_requested = 0;
3696 }
3697 if ( info->lcr_mem_requested ) {
3698 release_mem_region(info->phys_lcr_base + info->lcr_offset,128);
3699 info->lcr_mem_requested = 0;
3700 }
3701 if ( info->sca_base_requested ) {
3702 release_mem_region(info->phys_sca_base + info->sca_offset,SCA_BASE_SIZE);
3703 info->sca_base_requested = 0;
3704 }
3705 if ( info->sca_statctrl_requested ) {
3706 release_mem_region(info->phys_statctrl_base + info->statctrl_offset,SCA_REG_SIZE);
3707 info->sca_statctrl_requested = 0;
3708 }
3709
3710 if (info->memory_base){
3711 iounmap(info->memory_base);
3712 info->memory_base = NULL;
3713 }
3714
3715 if (info->sca_base) {
3716 iounmap(info->sca_base - info->sca_offset);
3717 info->sca_base=NULL;
3718 }
3719
3720 if (info->statctrl_base) {
3721 iounmap(info->statctrl_base - info->statctrl_offset);
3722 info->statctrl_base=NULL;
3723 }
3724
3725 if (info->lcr_base){
3726 iounmap(info->lcr_base - info->lcr_offset);
3727 info->lcr_base = NULL;
3728 }
3729
3730 if ( debug_level >= DEBUG_LEVEL_INFO )
3731 printk( "%s(%d):%s release_resources() exit\n",
3732 __FILE__,__LINE__,info->device_name );
3733 }
3734
3735 /* Add the specified device instance data structure to the
3736 * global linked list of devices and increment the device count.
3737 */
3738 void add_device(SLMP_INFO *info)
3739 {
3740 info->next_device = NULL;
3741 info->line = synclinkmp_device_count;
3742 sprintf(info->device_name,"ttySLM%dp%d",info->adapter_num,info->port_num);
3743
3744 if (info->line < MAX_DEVICES) {
3745 if (maxframe[info->line])
3746 info->max_frame_size = maxframe[info->line];
3747 info->dosyncppp = dosyncppp[info->line];
3748 }
3749
3750 synclinkmp_device_count++;
3751
3752 if ( !synclinkmp_device_list )
3753 synclinkmp_device_list = info;
3754 else {
3755 SLMP_INFO *current_dev = synclinkmp_device_list;
3756 while( current_dev->next_device )
3757 current_dev = current_dev->next_device;
3758 current_dev->next_device = info;
3759 }
3760
3761 if ( info->max_frame_size < 4096 )
3762 info->max_frame_size = 4096;
3763 else if ( info->max_frame_size > 65535 )
3764 info->max_frame_size = 65535;
3765
3766 printk( "SyncLink MultiPort %s: "
3767 "Mem=(%08x %08X %08x %08X) IRQ=%d MaxFrameSize=%u\n",
3768 info->device_name,
3769 info->phys_sca_base,
3770 info->phys_memory_base,
3771 info->phys_statctrl_base,
3772 info->phys_lcr_base,
3773 info->irq_level,
3774 info->max_frame_size );
3775
3776 #if SYNCLINK_GENERIC_HDLC
3777 hdlcdev_init(info);
3778 #endif
3779 }
3780
3781 /* Allocate and initialize a device instance structure
3782 *
3783 * Return Value: pointer to SLMP_INFO if success, otherwise NULL
3784 */
3785 static SLMP_INFO *alloc_dev(int adapter_num, int port_num, struct pci_dev *pdev)
3786 {
3787 SLMP_INFO *info;
3788
3789 info = kzalloc(sizeof(SLMP_INFO),
3790 GFP_KERNEL);
3791
3792 if (!info) {
3793 printk("%s(%d) Error can't allocate device instance data for adapter %d, port %d\n",
3794 __FILE__,__LINE__, adapter_num, port_num);
3795 } else {
3796 info->magic = MGSL_MAGIC;
3797 INIT_WORK(&info->task, bh_handler);
3798 info->max_frame_size = 4096;
3799 info->close_delay = 5*HZ/10;
3800 info->closing_wait = 30*HZ;
3801 init_waitqueue_head(&info->open_wait);
3802 init_waitqueue_head(&info->close_wait);
3803 init_waitqueue_head(&info->status_event_wait_q);
3804 init_waitqueue_head(&info->event_wait_q);
3805 spin_lock_init(&info->netlock);
3806 memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS));
3807 info->idle_mode = HDLC_TXIDLE_FLAGS;
3808 info->adapter_num = adapter_num;
3809 info->port_num = port_num;
3810
3811 /* Copy configuration info to device instance data */
3812 info->irq_level = pdev->irq;
3813 info->phys_lcr_base = pci_resource_start(pdev,0);
3814 info->phys_sca_base = pci_resource_start(pdev,2);
3815 info->phys_memory_base = pci_resource_start(pdev,3);
3816 info->phys_statctrl_base = pci_resource_start(pdev,4);
3817
3818 /* Because veremap only works on page boundaries we must map
3819 * a larger area than is actually implemented for the LCR
3820 * memory range. We map a full page starting at the page boundary.
3821 */
3822 info->lcr_offset = info->phys_lcr_base & (PAGE_SIZE-1);
3823 info->phys_lcr_base &= ~(PAGE_SIZE-1);
3824
3825 info->sca_offset = info->phys_sca_base & (PAGE_SIZE-1);
3826 info->phys_sca_base &= ~(PAGE_SIZE-1);
3827
3828 info->statctrl_offset = info->phys_statctrl_base & (PAGE_SIZE-1);
3829 info->phys_statctrl_base &= ~(PAGE_SIZE-1);
3830
3831 info->bus_type = MGSL_BUS_TYPE_PCI;
3832 info->irq_flags = IRQF_SHARED;
3833
3834 setup_timer(&info->tx_timer, tx_timeout, (unsigned long)info);
3835 setup_timer(&info->status_timer, status_timeout,
3836 (unsigned long)info);
3837
3838 /* Store the PCI9050 misc control register value because a flaw
3839 * in the PCI9050 prevents LCR registers from being read if
3840 * BIOS assigns an LCR base address with bit 7 set.
3841 *
3842 * Only the misc control register is accessed for which only
3843 * write access is needed, so set an initial value and change
3844 * bits to the device instance data as we write the value
3845 * to the actual misc control register.
3846 */
3847 info->misc_ctrl_value = 0x087e4546;
3848
3849 /* initial port state is unknown - if startup errors
3850 * occur, init_error will be set to indicate the
3851 * problem. Once the port is fully initialized,
3852 * this value will be set to 0 to indicate the
3853 * port is available.
3854 */
3855 info->init_error = -1;
3856 }
3857
3858 return info;
3859 }
3860
3861 void device_init(int adapter_num, struct pci_dev *pdev)
3862 {
3863 SLMP_INFO *port_array[SCA_MAX_PORTS];
3864 int port;
3865
3866 /* allocate device instances for up to SCA_MAX_PORTS devices */
3867 for ( port = 0; port < SCA_MAX_PORTS; ++port ) {
3868 port_array[port] = alloc_dev(adapter_num,port,pdev);
3869 if( port_array[port] == NULL ) {
3870 for ( --port; port >= 0; --port )
3871 kfree(port_array[port]);
3872 return;
3873 }
3874 }
3875
3876 /* give copy of port_array to all ports and add to device list */
3877 for ( port = 0; port < SCA_MAX_PORTS; ++port ) {
3878 memcpy(port_array[port]->port_array,port_array,sizeof(port_array));
3879 add_device( port_array[port] );
3880 spin_lock_init(&port_array[port]->lock);
3881 }
3882
3883 /* Allocate and claim adapter resources */
3884 if ( !claim_resources(port_array[0]) ) {
3885
3886 alloc_dma_bufs(port_array[0]);
3887
3888 /* copy resource information from first port to others */
3889 for ( port = 1; port < SCA_MAX_PORTS; ++port ) {
3890 port_array[port]->lock = port_array[0]->lock;
3891 port_array[port]->irq_level = port_array[0]->irq_level;
3892 port_array[port]->memory_base = port_array[0]->memory_base;
3893 port_array[port]->sca_base = port_array[0]->sca_base;
3894 port_array[port]->statctrl_base = port_array[0]->statctrl_base;
3895 port_array[port]->lcr_base = port_array[0]->lcr_base;
3896 alloc_dma_bufs(port_array[port]);
3897 }
3898
3899 if ( request_irq(port_array[0]->irq_level,
3900 synclinkmp_interrupt,
3901 port_array[0]->irq_flags,
3902 port_array[0]->device_name,
3903 port_array[0]) < 0 ) {
3904 printk( "%s(%d):%s Cant request interrupt, IRQ=%d\n",
3905 __FILE__,__LINE__,
3906 port_array[0]->device_name,
3907 port_array[0]->irq_level );
3908 }
3909 else {
3910 port_array[0]->irq_requested = 1;
3911 adapter_test(port_array[0]);
3912 }
3913 }
3914 }
3915
3916 static const struct tty_operations ops = {
3917 .open = open,
3918 .close = close,
3919 .write = write,
3920 .put_char = put_char,
3921 .flush_chars = flush_chars,
3922 .write_room = write_room,
3923 .chars_in_buffer = chars_in_buffer,
3924 .flush_buffer = flush_buffer,
3925 .ioctl = ioctl,
3926 .throttle = throttle,
3927 .unthrottle = unthrottle,
3928 .send_xchar = send_xchar,
3929 .break_ctl = set_break,
3930 .wait_until_sent = wait_until_sent,
3931 .read_proc = read_proc,
3932 .set_termios = set_termios,
3933 .stop = tx_hold,
3934 .start = tx_release,
3935 .hangup = hangup,
3936 .tiocmget = tiocmget,
3937 .tiocmset = tiocmset,
3938 };
3939
3940 static void synclinkmp_cleanup(void)
3941 {
3942 int rc;
3943 SLMP_INFO *info;
3944 SLMP_INFO *tmp;
3945
3946 printk("Unloading %s %s\n", driver_name, driver_version);
3947
3948 if (serial_driver) {
3949 if ((rc = tty_unregister_driver(serial_driver)))
3950 printk("%s(%d) failed to unregister tty driver err=%d\n",
3951 __FILE__,__LINE__,rc);
3952 put_tty_driver(serial_driver);
3953 }
3954
3955 /* reset devices */
3956 info = synclinkmp_device_list;
3957 while(info) {
3958 reset_port(info);
3959 info = info->next_device;
3960 }
3961
3962 /* release devices */
3963 info = synclinkmp_device_list;
3964 while(info) {
3965 #if SYNCLINK_GENERIC_HDLC
3966 hdlcdev_exit(info);
3967 #endif
3968 free_dma_bufs(info);
3969 free_tmp_rx_buf(info);
3970 if ( info->port_num == 0 ) {
3971 if (info->sca_base)
3972 write_reg(info, LPR, 1); /* set low power mode */
3973 release_resources(info);
3974 }
3975 tmp = info;
3976 info = info->next_device;
3977 kfree(tmp);
3978 }
3979
3980 pci_unregister_driver(&synclinkmp_pci_driver);
3981 }
3982
3983 /* Driver initialization entry point.
3984 */
3985
3986 static int __init synclinkmp_init(void)
3987 {
3988 int rc;
3989
3990 if (break_on_load) {
3991 synclinkmp_get_text_ptr();
3992 BREAKPOINT();
3993 }
3994
3995 printk("%s %s\n", driver_name, driver_version);
3996
3997 if ((rc = pci_register_driver(&synclinkmp_pci_driver)) < 0) {
3998 printk("%s:failed to register PCI driver, error=%d\n",__FILE__,rc);
3999 return rc;
4000 }
4001
4002 serial_driver = alloc_tty_driver(128);
4003 if (!serial_driver) {
4004 rc = -ENOMEM;
4005 goto error;
4006 }
4007
4008 /* Initialize the tty_driver structure */
4009
4010 serial_driver->owner = THIS_MODULE;
4011 serial_driver->driver_name = "synclinkmp";
4012 serial_driver->name = "ttySLM";
4013 serial_driver->major = ttymajor;
4014 serial_driver->minor_start = 64;
4015 serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
4016 serial_driver->subtype = SERIAL_TYPE_NORMAL;
4017 serial_driver->init_termios = tty_std_termios;
4018 serial_driver->init_termios.c_cflag =
4019 B9600 | CS8 | CREAD | HUPCL | CLOCAL;
4020 serial_driver->init_termios.c_ispeed = 9600;
4021 serial_driver->init_termios.c_ospeed = 9600;
4022 serial_driver->flags = TTY_DRIVER_REAL_RAW;
4023 tty_set_operations(serial_driver, &ops);
4024 if ((rc = tty_register_driver(serial_driver)) < 0) {
4025 printk("%s(%d):Couldn't register serial driver\n",
4026 __FILE__,__LINE__);
4027 put_tty_driver(serial_driver);
4028 serial_driver = NULL;
4029 goto error;
4030 }
4031
4032 printk("%s %s, tty major#%d\n",
4033 driver_name, driver_version,
4034 serial_driver->major);
4035
4036 return 0;
4037
4038 error:
4039 synclinkmp_cleanup();
4040 return rc;
4041 }
4042
4043 static void __exit synclinkmp_exit(void)
4044 {
4045 synclinkmp_cleanup();
4046 }
4047
4048 module_init(synclinkmp_init);
4049 module_exit(synclinkmp_exit);
4050
4051 /* Set the port for internal loopback mode.
4052 * The TxCLK and RxCLK signals are generated from the BRG and
4053 * the TxD is looped back to the RxD internally.
4054 */
4055 void enable_loopback(SLMP_INFO *info, int enable)
4056 {
4057 if (enable) {
4058 /* MD2 (Mode Register 2)
4059 * 01..00 CNCT<1..0> Channel Connection 11=Local Loopback
4060 */
4061 write_reg(info, MD2, (unsigned char)(read_reg(info, MD2) | (BIT1 + BIT0)));
4062
4063 /* degate external TxC clock source */
4064 info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2));
4065 write_control_reg(info);
4066
4067 /* RXS/TXS (Rx/Tx clock source)
4068 * 07 Reserved, must be 0
4069 * 06..04 Clock Source, 100=BRG
4070 * 03..00 Clock Divisor, 0000=1
4071 */
4072 write_reg(info, RXS, 0x40);
4073 write_reg(info, TXS, 0x40);
4074
4075 } else {
4076 /* MD2 (Mode Register 2)
4077 * 01..00 CNCT<1..0> Channel connection, 0=normal
4078 */
4079 write_reg(info, MD2, (unsigned char)(read_reg(info, MD2) & ~(BIT1 + BIT0)));
4080
4081 /* RXS/TXS (Rx/Tx clock source)
4082 * 07 Reserved, must be 0
4083 * 06..04 Clock Source, 000=RxC/TxC Pin
4084 * 03..00 Clock Divisor, 0000=1
4085 */
4086 write_reg(info, RXS, 0x00);
4087 write_reg(info, TXS, 0x00);
4088 }
4089
4090 /* set LinkSpeed if available, otherwise default to 2Mbps */
4091 if (info->params.clock_speed)
4092 set_rate(info, info->params.clock_speed);
4093 else
4094 set_rate(info, 3686400);
4095 }
4096
4097 /* Set the baud rate register to the desired speed
4098 *
4099 * data_rate data rate of clock in bits per second
4100 * A data rate of 0 disables the AUX clock.
4101 */
4102 void set_rate( SLMP_INFO *info, u32 data_rate )
4103 {
4104 u32 TMCValue;
4105 unsigned char BRValue;
4106 u32 Divisor=0;
4107
4108 /* fBRG = fCLK/(TMC * 2^BR)
4109 */
4110 if (data_rate != 0) {
4111 Divisor = 14745600/data_rate;
4112 if (!Divisor)
4113 Divisor = 1;
4114
4115 TMCValue = Divisor;
4116
4117 BRValue = 0;
4118 if (TMCValue != 1 && TMCValue != 2) {
4119 /* BRValue of 0 provides 50/50 duty cycle *only* when
4120 * TMCValue is 1 or 2. BRValue of 1 to 9 always provides
4121 * 50/50 duty cycle.
4122 */
4123 BRValue = 1;
4124 TMCValue >>= 1;
4125 }
4126
4127 /* while TMCValue is too big for TMC register, divide
4128 * by 2 and increment BR exponent.
4129 */
4130 for(; TMCValue > 256 && BRValue < 10; BRValue++)
4131 TMCValue >>= 1;
4132
4133 write_reg(info, TXS,
4134 (unsigned char)((read_reg(info, TXS) & 0xf0) | BRValue));
4135 write_reg(info, RXS,
4136 (unsigned char)((read_reg(info, RXS) & 0xf0) | BRValue));
4137 write_reg(info, TMC, (unsigned char)TMCValue);
4138 }
4139 else {
4140 write_reg(info, TXS,0);
4141 write_reg(info, RXS,0);
4142 write_reg(info, TMC, 0);
4143 }
4144 }
4145
4146 /* Disable receiver
4147 */
4148 void rx_stop(SLMP_INFO *info)
4149 {
4150 if (debug_level >= DEBUG_LEVEL_ISR)
4151 printk("%s(%d):%s rx_stop()\n",
4152 __FILE__,__LINE__, info->device_name );
4153
4154 write_reg(info, CMD, RXRESET);
4155
4156 info->ie0_value &= ~RXRDYE;
4157 write_reg(info, IE0, info->ie0_value); /* disable Rx data interrupts */
4158
4159 write_reg(info, RXDMA + DSR, 0); /* disable Rx DMA */
4160 write_reg(info, RXDMA + DCMD, SWABORT); /* reset/init Rx DMA */
4161 write_reg(info, RXDMA + DIR, 0); /* disable Rx DMA interrupts */
4162
4163 info->rx_enabled = 0;
4164 info->rx_overflow = 0;
4165 }
4166
4167 /* enable the receiver
4168 */
4169 void rx_start(SLMP_INFO *info)
4170 {
4171 int i;
4172
4173 if (debug_level >= DEBUG_LEVEL_ISR)
4174 printk("%s(%d):%s rx_start()\n",
4175 __FILE__,__LINE__, info->device_name );
4176
4177 write_reg(info, CMD, RXRESET);
4178
4179 if ( info->params.mode == MGSL_MODE_HDLC ) {
4180 /* HDLC, disabe IRQ on rxdata */
4181 info->ie0_value &= ~RXRDYE;
4182 write_reg(info, IE0, info->ie0_value);
4183
4184 /* Reset all Rx DMA buffers and program rx dma */
4185 write_reg(info, RXDMA + DSR, 0); /* disable Rx DMA */
4186 write_reg(info, RXDMA + DCMD, SWABORT); /* reset/init Rx DMA */
4187
4188 for (i = 0; i < info->rx_buf_count; i++) {
4189 info->rx_buf_list[i].status = 0xff;
4190
4191 // throttle to 4 shared memory writes at a time to prevent
4192 // hogging local bus (keep latency time for DMA requests low).
4193 if (!(i % 4))
4194 read_status_reg(info);
4195 }
4196 info->current_rx_buf = 0;
4197
4198 /* set current/1st descriptor address */
4199 write_reg16(info, RXDMA + CDA,
4200 info->rx_buf_list_ex[0].phys_entry);
4201
4202 /* set new last rx descriptor address */
4203 write_reg16(info, RXDMA + EDA,
4204 info->rx_buf_list_ex[info->rx_buf_count - 1].phys_entry);
4205
4206 /* set buffer length (shared by all rx dma data buffers) */
4207 write_reg16(info, RXDMA + BFL, SCABUFSIZE);
4208
4209 write_reg(info, RXDMA + DIR, 0x60); /* enable Rx DMA interrupts (EOM/BOF) */
4210 write_reg(info, RXDMA + DSR, 0xf2); /* clear Rx DMA IRQs, enable Rx DMA */
4211 } else {
4212 /* async, enable IRQ on rxdata */
4213 info->ie0_value |= RXRDYE;
4214 write_reg(info, IE0, info->ie0_value);
4215 }
4216
4217 write_reg(info, CMD, RXENABLE);
4218
4219 info->rx_overflow = FALSE;
4220 info->rx_enabled = 1;
4221 }
4222
4223 /* Enable the transmitter and send a transmit frame if
4224 * one is loaded in the DMA buffers.
4225 */
4226 void tx_start(SLMP_INFO *info)
4227 {
4228 if (debug_level >= DEBUG_LEVEL_ISR)
4229 printk("%s(%d):%s tx_start() tx_count=%d\n",
4230 __FILE__,__LINE__, info->device_name,info->tx_count );
4231
4232 if (!info->tx_enabled ) {
4233 write_reg(info, CMD, TXRESET);
4234 write_reg(info, CMD, TXENABLE);
4235 info->tx_enabled = TRUE;
4236 }
4237
4238 if ( info->tx_count ) {
4239
4240 /* If auto RTS enabled and RTS is inactive, then assert */
4241 /* RTS and set a flag indicating that the driver should */
4242 /* negate RTS when the transmission completes. */
4243
4244 info->drop_rts_on_tx_done = 0;
4245
4246 if (info->params.mode != MGSL_MODE_ASYNC) {
4247
4248 if ( info->params.flags & HDLC_FLAG_AUTO_RTS ) {
4249 get_signals( info );
4250 if ( !(info->serial_signals & SerialSignal_RTS) ) {
4251 info->serial_signals |= SerialSignal_RTS;
4252 set_signals( info );
4253 info->drop_rts_on_tx_done = 1;
4254 }
4255 }
4256
4257 write_reg16(info, TRC0,
4258 (unsigned short)(((tx_negate_fifo_level-1)<<8) + tx_active_fifo_level));
4259
4260 write_reg(info, TXDMA + DSR, 0); /* disable DMA channel */
4261 write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
4262
4263 /* set TX CDA (current descriptor address) */
4264 write_reg16(info, TXDMA + CDA,
4265 info->tx_buf_list_ex[0].phys_entry);
4266
4267 /* set TX EDA (last descriptor address) */
4268 write_reg16(info, TXDMA + EDA,
4269 info->tx_buf_list_ex[info->last_tx_buf].phys_entry);
4270
4271 /* enable underrun IRQ */
4272 info->ie1_value &= ~IDLE;
4273 info->ie1_value |= UDRN;
4274 write_reg(info, IE1, info->ie1_value);
4275 write_reg(info, SR1, (unsigned char)(IDLE + UDRN));
4276
4277 write_reg(info, TXDMA + DIR, 0x40); /* enable Tx DMA interrupts (EOM) */
4278 write_reg(info, TXDMA + DSR, 0xf2); /* clear Tx DMA IRQs, enable Tx DMA */
4279
4280 mod_timer(&info->tx_timer, jiffies +
4281 msecs_to_jiffies(5000));
4282 }
4283 else {
4284 tx_load_fifo(info);
4285 /* async, enable IRQ on txdata */
4286 info->ie0_value |= TXRDYE;
4287 write_reg(info, IE0, info->ie0_value);
4288 }
4289
4290 info->tx_active = 1;
4291 }
4292 }
4293
4294 /* stop the transmitter and DMA
4295 */
4296 void tx_stop( SLMP_INFO *info )
4297 {
4298 if (debug_level >= DEBUG_LEVEL_ISR)
4299 printk("%s(%d):%s tx_stop()\n",
4300 __FILE__,__LINE__, info->device_name );
4301
4302 del_timer(&info->tx_timer);
4303
4304 write_reg(info, TXDMA + DSR, 0); /* disable DMA channel */
4305 write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
4306
4307 write_reg(info, CMD, TXRESET);
4308
4309 info->ie1_value &= ~(UDRN + IDLE);
4310 write_reg(info, IE1, info->ie1_value); /* disable tx status interrupts */
4311 write_reg(info, SR1, (unsigned char)(IDLE + UDRN)); /* clear pending */
4312
4313 info->ie0_value &= ~TXRDYE;
4314 write_reg(info, IE0, info->ie0_value); /* disable tx data interrupts */
4315
4316 info->tx_enabled = 0;
4317 info->tx_active = 0;
4318 }
4319
4320 /* Fill the transmit FIFO until the FIFO is full or
4321 * there is no more data to load.
4322 */
4323 void tx_load_fifo(SLMP_INFO *info)
4324 {
4325 u8 TwoBytes[2];
4326
4327 /* do nothing is now tx data available and no XON/XOFF pending */
4328
4329 if ( !info->tx_count && !info->x_char )
4330 return;
4331
4332 /* load the Transmit FIFO until FIFOs full or all data sent */
4333
4334 while( info->tx_count && (read_reg(info,SR0) & BIT1) ) {
4335
4336 /* there is more space in the transmit FIFO and */
4337 /* there is more data in transmit buffer */
4338
4339 if ( (info->tx_count > 1) && !info->x_char ) {
4340 /* write 16-bits */
4341 TwoBytes[0] = info->tx_buf[info->tx_get++];
4342 if (info->tx_get >= info->max_frame_size)
4343 info->tx_get -= info->max_frame_size;
4344 TwoBytes[1] = info->tx_buf[info->tx_get++];
4345 if (info->tx_get >= info->max_frame_size)
4346 info->tx_get -= info->max_frame_size;
4347
4348 write_reg16(info, TRB, *((u16 *)TwoBytes));
4349
4350 info->tx_count -= 2;
4351 info->icount.tx += 2;
4352 } else {
4353 /* only 1 byte left to transmit or 1 FIFO slot left */
4354
4355 if (info->x_char) {
4356 /* transmit pending high priority char */
4357 write_reg(info, TRB, info->x_char);
4358 info->x_char = 0;
4359 } else {
4360 write_reg(info, TRB, info->tx_buf[info->tx_get++]);
4361 if (info->tx_get >= info->max_frame_size)
4362 info->tx_get -= info->max_frame_size;
4363 info->tx_count--;
4364 }
4365 info->icount.tx++;
4366 }
4367 }
4368 }
4369
4370 /* Reset a port to a known state
4371 */
4372 void reset_port(SLMP_INFO *info)
4373 {
4374 if (info->sca_base) {
4375
4376 tx_stop(info);
4377 rx_stop(info);
4378
4379 info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
4380 set_signals(info);
4381
4382 /* disable all port interrupts */
4383 info->ie0_value = 0;
4384 info->ie1_value = 0;
4385 info->ie2_value = 0;
4386 write_reg(info, IE0, info->ie0_value);
4387 write_reg(info, IE1, info->ie1_value);
4388 write_reg(info, IE2, info->ie2_value);
4389
4390 write_reg(info, CMD, CHRESET);
4391 }
4392 }
4393
4394 /* Reset all the ports to a known state.
4395 */
4396 void reset_adapter(SLMP_INFO *info)
4397 {
4398 int i;
4399
4400 for ( i=0; i < SCA_MAX_PORTS; ++i) {
4401 if (info->port_array[i])
4402 reset_port(info->port_array[i]);
4403 }
4404 }
4405
4406 /* Program port for asynchronous communications.
4407 */
4408 void async_mode(SLMP_INFO *info)
4409 {
4410
4411 unsigned char RegValue;
4412
4413 tx_stop(info);
4414 rx_stop(info);
4415
4416 /* MD0, Mode Register 0
4417 *
4418 * 07..05 PRCTL<2..0>, Protocol Mode, 000=async
4419 * 04 AUTO, Auto-enable (RTS/CTS/DCD)
4420 * 03 Reserved, must be 0
4421 * 02 CRCCC, CRC Calculation, 0=disabled
4422 * 01..00 STOP<1..0> Stop bits (00=1,10=2)
4423 *
4424 * 0000 0000
4425 */
4426 RegValue = 0x00;
4427 if (info->params.stop_bits != 1)
4428 RegValue |= BIT1;
4429 write_reg(info, MD0, RegValue);
4430
4431 /* MD1, Mode Register 1
4432 *
4433 * 07..06 BRATE<1..0>, bit rate, 00=1/1 01=1/16 10=1/32 11=1/64
4434 * 05..04 TXCHR<1..0>, tx char size, 00=8 bits,01=7,10=6,11=5
4435 * 03..02 RXCHR<1..0>, rx char size
4436 * 01..00 PMPM<1..0>, Parity mode, 00=none 10=even 11=odd
4437 *
4438 * 0100 0000
4439 */
4440 RegValue = 0x40;
4441 switch (info->params.data_bits) {
4442 case 7: RegValue |= BIT4 + BIT2; break;
4443 case 6: RegValue |= BIT5 + BIT3; break;
4444 case 5: RegValue |= BIT5 + BIT4 + BIT3 + BIT2; break;
4445 }
4446 if (info->params.parity != ASYNC_PARITY_NONE) {
4447 RegValue |= BIT1;
4448 if (info->params.parity == ASYNC_PARITY_ODD)
4449 RegValue |= BIT0;
4450 }
4451 write_reg(info, MD1, RegValue);
4452
4453 /* MD2, Mode Register 2
4454 *
4455 * 07..02 Reserved, must be 0
4456 * 01..00 CNCT<1..0> Channel connection, 00=normal 11=local loopback
4457 *
4458 * 0000 0000
4459 */
4460 RegValue = 0x00;
4461 if (info->params.loopback)
4462 RegValue |= (BIT1 + BIT0);
4463 write_reg(info, MD2, RegValue);
4464
4465 /* RXS, Receive clock source
4466 *
4467 * 07 Reserved, must be 0
4468 * 06..04 RXCS<2..0>, clock source, 000=RxC Pin, 100=BRG, 110=DPLL
4469 * 03..00 RXBR<3..0>, rate divisor, 0000=1
4470 */
4471 RegValue=BIT6;
4472 write_reg(info, RXS, RegValue);
4473
4474 /* TXS, Transmit clock source
4475 *
4476 * 07 Reserved, must be 0
4477 * 06..04 RXCS<2..0>, clock source, 000=TxC Pin, 100=BRG, 110=Receive Clock
4478 * 03..00 RXBR<3..0>, rate divisor, 0000=1
4479 */
4480 RegValue=BIT6;
4481 write_reg(info, TXS, RegValue);
4482
4483 /* Control Register
4484 *
4485 * 6,4,2,0 CLKSEL<3..0>, 0 = TcCLK in, 1 = Auxclk out
4486 */
4487 info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2));
4488 write_control_reg(info);
4489
4490 tx_set_idle(info);
4491
4492 /* RRC Receive Ready Control 0
4493 *
4494 * 07..05 Reserved, must be 0
4495 * 04..00 RRC<4..0> Rx FIFO trigger active 0x00 = 1 byte
4496 */
4497 write_reg(info, RRC, 0x00);
4498
4499 /* TRC0 Transmit Ready Control 0
4500 *
4501 * 07..05 Reserved, must be 0
4502 * 04..00 TRC<4..0> Tx FIFO trigger active 0x10 = 16 bytes
4503 */
4504 write_reg(info, TRC0, 0x10);
4505
4506 /* TRC1 Transmit Ready Control 1
4507 *
4508 * 07..05 Reserved, must be 0
4509 * 04..00 TRC<4..0> Tx FIFO trigger inactive 0x1e = 31 bytes (full-1)
4510 */
4511 write_reg(info, TRC1, 0x1e);
4512
4513 /* CTL, MSCI control register
4514 *
4515 * 07..06 Reserved, set to 0
4516 * 05 UDRNC, underrun control, 0=abort 1=CRC+flag (HDLC/BSC)
4517 * 04 IDLC, idle control, 0=mark 1=idle register
4518 * 03 BRK, break, 0=off 1 =on (async)
4519 * 02 SYNCLD, sync char load enable (BSC) 1=enabled
4520 * 01 GOP, go active on poll (LOOP mode) 1=enabled
4521 * 00 RTS, RTS output control, 0=active 1=inactive
4522 *
4523 * 0001 0001
4524 */
4525 RegValue = 0x10;
4526 if (!(info->serial_signals & SerialSignal_RTS))
4527 RegValue |= 0x01;
4528 write_reg(info, CTL, RegValue);
4529
4530 /* enable status interrupts */
4531 info->ie0_value |= TXINTE + RXINTE;
4532 write_reg(info, IE0, info->ie0_value);
4533
4534 /* enable break detect interrupt */
4535 info->ie1_value = BRKD;
4536 write_reg(info, IE1, info->ie1_value);
4537
4538 /* enable rx overrun interrupt */
4539 info->ie2_value = OVRN;
4540 write_reg(info, IE2, info->ie2_value);
4541
4542 set_rate( info, info->params.data_rate * 16 );
4543 }
4544
4545 /* Program the SCA for HDLC communications.
4546 */
4547 void hdlc_mode(SLMP_INFO *info)
4548 {
4549 unsigned char RegValue;
4550 u32 DpllDivisor;
4551
4552 // Can't use DPLL because SCA outputs recovered clock on RxC when
4553 // DPLL mode selected. This causes output contention with RxC receiver.
4554 // Use of DPLL would require external hardware to disable RxC receiver
4555 // when DPLL mode selected.
4556 info->params.flags &= ~(HDLC_FLAG_TXC_DPLL + HDLC_FLAG_RXC_DPLL);
4557
4558 /* disable DMA interrupts */
4559 write_reg(info, TXDMA + DIR, 0);
4560 write_reg(info, RXDMA + DIR, 0);
4561
4562 /* MD0, Mode Register 0
4563 *
4564 * 07..05 PRCTL<2..0>, Protocol Mode, 100=HDLC
4565 * 04 AUTO, Auto-enable (RTS/CTS/DCD)
4566 * 03 Reserved, must be 0
4567 * 02 CRCCC, CRC Calculation, 1=enabled
4568 * 01 CRC1, CRC selection, 0=CRC-16,1=CRC-CCITT-16
4569 * 00 CRC0, CRC initial value, 1 = all 1s
4570 *
4571 * 1000 0001
4572 */
4573 RegValue = 0x81;
4574 if (info->params.flags & HDLC_FLAG_AUTO_CTS)
4575 RegValue |= BIT4;
4576 if (info->params.flags & HDLC_FLAG_AUTO_DCD)
4577 RegValue |= BIT4;
4578 if (info->params.crc_type == HDLC_CRC_16_CCITT)
4579 RegValue |= BIT2 + BIT1;
4580 write_reg(info, MD0, RegValue);
4581
4582 /* MD1, Mode Register 1
4583 *
4584 * 07..06 ADDRS<1..0>, Address detect, 00=no addr check
4585 * 05..04 TXCHR<1..0>, tx char size, 00=8 bits
4586 * 03..02 RXCHR<1..0>, rx char size, 00=8 bits
4587 * 01..00 PMPM<1..0>, Parity mode, 00=no parity
4588 *
4589 * 0000 0000
4590 */
4591 RegValue = 0x00;
4592 write_reg(info, MD1, RegValue);
4593
4594 /* MD2, Mode Register 2
4595 *
4596 * 07 NRZFM, 0=NRZ, 1=FM
4597 * 06..05 CODE<1..0> Encoding, 00=NRZ
4598 * 04..03 DRATE<1..0> DPLL Divisor, 00=8
4599 * 02 Reserved, must be 0
4600 * 01..00 CNCT<1..0> Channel connection, 0=normal
4601 *
4602 * 0000 0000
4603 */
4604 RegValue = 0x00;
4605 switch(info->params.encoding) {
4606 case HDLC_ENCODING_NRZI: RegValue |= BIT5; break;
4607 case HDLC_ENCODING_BIPHASE_MARK: RegValue |= BIT7 + BIT5; break; /* aka FM1 */
4608 case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT7 + BIT6; break; /* aka FM0 */
4609 case HDLC_ENCODING_BIPHASE_LEVEL: RegValue |= BIT7; break; /* aka Manchester */
4610 #if 0
4611 case HDLC_ENCODING_NRZB: /* not supported */
4612 case HDLC_ENCODING_NRZI_MARK: /* not supported */
4613 case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: /* not supported */
4614 #endif
4615 }
4616 if ( info->params.flags & HDLC_FLAG_DPLL_DIV16 ) {
4617 DpllDivisor = 16;
4618 RegValue |= BIT3;
4619 } else if ( info->params.flags & HDLC_FLAG_DPLL_DIV8 ) {
4620 DpllDivisor = 8;
4621 } else {
4622 DpllDivisor = 32;
4623 RegValue |= BIT4;
4624 }
4625 write_reg(info, MD2, RegValue);
4626
4627
4628 /* RXS, Receive clock source
4629 *
4630 * 07 Reserved, must be 0
4631 * 06..04 RXCS<2..0>, clock source, 000=RxC Pin, 100=BRG, 110=DPLL
4632 * 03..00 RXBR<3..0>, rate divisor, 0000=1
4633 */
4634 RegValue=0;
4635 if (info->params.flags & HDLC_FLAG_RXC_BRG)
4636 RegValue |= BIT6;
4637 if (info->params.flags & HDLC_FLAG_RXC_DPLL)
4638 RegValue |= BIT6 + BIT5;
4639 write_reg(info, RXS, RegValue);
4640
4641 /* TXS, Transmit clock source
4642 *
4643 * 07 Reserved, must be 0
4644 * 06..04 RXCS<2..0>, clock source, 000=TxC Pin, 100=BRG, 110=Receive Clock
4645 * 03..00 RXBR<3..0>, rate divisor, 0000=1
4646 */
4647 RegValue=0;
4648 if (info->params.flags & HDLC_FLAG_TXC_BRG)
4649 RegValue |= BIT6;
4650 if (info->params.flags & HDLC_FLAG_TXC_DPLL)
4651 RegValue |= BIT6 + BIT5;
4652 write_reg(info, TXS, RegValue);
4653
4654 if (info->params.flags & HDLC_FLAG_RXC_DPLL)
4655 set_rate(info, info->params.clock_speed * DpllDivisor);
4656 else
4657 set_rate(info, info->params.clock_speed);
4658
4659 /* GPDATA (General Purpose I/O Data Register)
4660 *
4661 * 6,4,2,0 CLKSEL<3..0>, 0 = TcCLK in, 1 = Auxclk out
4662 */
4663 if (info->params.flags & HDLC_FLAG_TXC_BRG)
4664 info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2));
4665 else
4666 info->port_array[0]->ctrlreg_value &= ~(BIT0 << (info->port_num * 2));
4667 write_control_reg(info);
4668
4669 /* RRC Receive Ready Control 0
4670 *
4671 * 07..05 Reserved, must be 0
4672 * 04..00 RRC<4..0> Rx FIFO trigger active
4673 */
4674 write_reg(info, RRC, rx_active_fifo_level);
4675
4676 /* TRC0 Transmit Ready Control 0
4677 *
4678 * 07..05 Reserved, must be 0
4679 * 04..00 TRC<4..0> Tx FIFO trigger active
4680 */
4681 write_reg(info, TRC0, tx_active_fifo_level);
4682
4683 /* TRC1 Transmit Ready Control 1
4684 *
4685 * 07..05 Reserved, must be 0
4686 * 04..00 TRC<4..0> Tx FIFO trigger inactive 0x1f = 32 bytes (full)
4687 */
4688 write_reg(info, TRC1, (unsigned char)(tx_negate_fifo_level - 1));
4689
4690 /* DMR, DMA Mode Register
4691 *
4692 * 07..05 Reserved, must be 0
4693 * 04 TMOD, Transfer Mode: 1=chained-block
4694 * 03 Reserved, must be 0
4695 * 02 NF, Number of Frames: 1=multi-frame
4696 * 01 CNTE, Frame End IRQ Counter enable: 0=disabled
4697 * 00 Reserved, must be 0
4698 *
4699 * 0001 0100
4700 */
4701 write_reg(info, TXDMA + DMR, 0x14);
4702 write_reg(info, RXDMA + DMR, 0x14);
4703
4704 /* Set chain pointer base (upper 8 bits of 24 bit addr) */
4705 write_reg(info, RXDMA + CPB,
4706 (unsigned char)(info->buffer_list_phys >> 16));
4707
4708 /* Set chain pointer base (upper 8 bits of 24 bit addr) */
4709 write_reg(info, TXDMA + CPB,
4710 (unsigned char)(info->buffer_list_phys >> 16));
4711
4712 /* enable status interrupts. other code enables/disables
4713 * the individual sources for these two interrupt classes.
4714 */
4715 info->ie0_value |= TXINTE + RXINTE;
4716 write_reg(info, IE0, info->ie0_value);
4717
4718 /* CTL, MSCI control register
4719 *
4720 * 07..06 Reserved, set to 0
4721 * 05 UDRNC, underrun control, 0=abort 1=CRC+flag (HDLC/BSC)
4722 * 04 IDLC, idle control, 0=mark 1=idle register
4723 * 03 BRK, break, 0=off 1 =on (async)
4724 * 02 SYNCLD, sync char load enable (BSC) 1=enabled
4725 * 01 GOP, go active on poll (LOOP mode) 1=enabled
4726 * 00 RTS, RTS output control, 0=active 1=inactive
4727 *
4728 * 0001 0001
4729 */
4730 RegValue = 0x10;
4731 if (!(info->serial_signals & SerialSignal_RTS))
4732 RegValue |= 0x01;
4733 write_reg(info, CTL, RegValue);
4734
4735 /* preamble not supported ! */
4736
4737 tx_set_idle(info);
4738 tx_stop(info);
4739 rx_stop(info);
4740
4741 set_rate(info, info->params.clock_speed);
4742
4743 if (info->params.loopback)
4744 enable_loopback(info,1);
4745 }
4746
4747 /* Set the transmit HDLC idle mode
4748 */
4749 void tx_set_idle(SLMP_INFO *info)
4750 {
4751 unsigned char RegValue = 0xff;
4752
4753 /* Map API idle mode to SCA register bits */
4754 switch(info->idle_mode) {
4755 case HDLC_TXIDLE_FLAGS: RegValue = 0x7e; break;
4756 case HDLC_TXIDLE_ALT_ZEROS_ONES: RegValue = 0xaa; break;
4757 case HDLC_TXIDLE_ZEROS: RegValue = 0x00; break;
4758 case HDLC_TXIDLE_ONES: RegValue = 0xff; break;
4759 case HDLC_TXIDLE_ALT_MARK_SPACE: RegValue = 0xaa; break;
4760 case HDLC_TXIDLE_SPACE: RegValue = 0x00; break;
4761 case HDLC_TXIDLE_MARK: RegValue = 0xff; break;
4762 }
4763
4764 write_reg(info, IDL, RegValue);
4765 }
4766
4767 /* Query the adapter for the state of the V24 status (input) signals.
4768 */
4769 void get_signals(SLMP_INFO *info)
4770 {
4771 u16 status = read_reg(info, SR3);
4772 u16 gpstatus = read_status_reg(info);
4773 u16 testbit;
4774
4775 /* clear all serial signals except DTR and RTS */
4776 info->serial_signals &= SerialSignal_DTR + SerialSignal_RTS;
4777
4778 /* set serial signal bits to reflect MISR */
4779
4780 if (!(status & BIT3))
4781 info->serial_signals |= SerialSignal_CTS;
4782
4783 if ( !(status & BIT2))
4784 info->serial_signals |= SerialSignal_DCD;
4785
4786 testbit = BIT1 << (info->port_num * 2); // Port 0..3 RI is GPDATA<1,3,5,7>
4787 if (!(gpstatus & testbit))
4788 info->serial_signals |= SerialSignal_RI;
4789
4790 testbit = BIT0 << (info->port_num * 2); // Port 0..3 DSR is GPDATA<0,2,4,6>
4791 if (!(gpstatus & testbit))
4792 info->serial_signals |= SerialSignal_DSR;
4793 }
4794
4795 /* Set the state of DTR and RTS based on contents of
4796 * serial_signals member of device context.
4797 */
4798 void set_signals(SLMP_INFO *info)
4799 {
4800 unsigned char RegValue;
4801 u16 EnableBit;
4802
4803 RegValue = read_reg(info, CTL);
4804 if (info->serial_signals & SerialSignal_RTS)
4805 RegValue &= ~BIT0;
4806 else
4807 RegValue |= BIT0;
4808 write_reg(info, CTL, RegValue);
4809
4810 // Port 0..3 DTR is ctrl reg <1,3,5,7>
4811 EnableBit = BIT1 << (info->port_num*2);
4812 if (info->serial_signals & SerialSignal_DTR)
4813 info->port_array[0]->ctrlreg_value &= ~EnableBit;
4814 else
4815 info->port_array[0]->ctrlreg_value |= EnableBit;
4816 write_control_reg(info);
4817 }
4818
4819 /*******************/
4820 /* DMA Buffer Code */
4821 /*******************/
4822
4823 /* Set the count for all receive buffers to SCABUFSIZE
4824 * and set the current buffer to the first buffer. This effectively
4825 * makes all buffers free and discards any data in buffers.
4826 */
4827 void rx_reset_buffers(SLMP_INFO *info)
4828 {
4829 rx_free_frame_buffers(info, 0, info->rx_buf_count - 1);
4830 }
4831
4832 /* Free the buffers used by a received frame
4833 *
4834 * info pointer to device instance data
4835 * first index of 1st receive buffer of frame
4836 * last index of last receive buffer of frame
4837 */
4838 void rx_free_frame_buffers(SLMP_INFO *info, unsigned int first, unsigned int last)
4839 {
4840 int done = 0;
4841
4842 while(!done) {
4843 /* reset current buffer for reuse */
4844 info->rx_buf_list[first].status = 0xff;
4845
4846 if (first == last) {
4847 done = 1;
4848 /* set new last rx descriptor address */
4849 write_reg16(info, RXDMA + EDA, info->rx_buf_list_ex[first].phys_entry);
4850 }
4851
4852 first++;
4853 if (first == info->rx_buf_count)
4854 first = 0;
4855 }
4856
4857 /* set current buffer to next buffer after last buffer of frame */
4858 info->current_rx_buf = first;
4859 }
4860
4861 /* Return a received frame from the receive DMA buffers.
4862 * Only frames received without errors are returned.
4863 *
4864 * Return Value: 1 if frame returned, otherwise 0
4865 */
4866 int rx_get_frame(SLMP_INFO *info)
4867 {
4868 unsigned int StartIndex, EndIndex; /* index of 1st and last buffers of Rx frame */
4869 unsigned short status;
4870 unsigned int framesize = 0;
4871 int ReturnCode = 0;
4872 unsigned long flags;
4873 struct tty_struct *tty = info->tty;
4874 unsigned char addr_field = 0xff;
4875 SCADESC *desc;
4876 SCADESC_EX *desc_ex;
4877
4878 CheckAgain:
4879 /* assume no frame returned, set zero length */
4880 framesize = 0;
4881 addr_field = 0xff;
4882
4883 /*
4884 * current_rx_buf points to the 1st buffer of the next available
4885 * receive frame. To find the last buffer of the frame look for
4886 * a non-zero status field in the buffer entries. (The status
4887 * field is set by the 16C32 after completing a receive frame.
4888 */
4889 StartIndex = EndIndex = info->current_rx_buf;
4890
4891 for ( ;; ) {
4892 desc = &info->rx_buf_list[EndIndex];
4893 desc_ex = &info->rx_buf_list_ex[EndIndex];
4894
4895 if (desc->status == 0xff)
4896 goto Cleanup; /* current desc still in use, no frames available */
4897
4898 if (framesize == 0 && info->params.addr_filter != 0xff)
4899 addr_field = desc_ex->virt_addr[0];
4900
4901 framesize += desc->length;
4902
4903 /* Status != 0 means last buffer of frame */
4904 if (desc->status)
4905 break;
4906
4907 EndIndex++;
4908 if (EndIndex == info->rx_buf_count)
4909 EndIndex = 0;
4910
4911 if (EndIndex == info->current_rx_buf) {
4912 /* all buffers have been 'used' but none mark */
4913 /* the end of a frame. Reset buffers and receiver. */
4914 if ( info->rx_enabled ){
4915 spin_lock_irqsave(&info->lock,flags);
4916 rx_start(info);
4917 spin_unlock_irqrestore(&info->lock,flags);
4918 }
4919 goto Cleanup;
4920 }
4921
4922 }
4923
4924 /* check status of receive frame */
4925
4926 /* frame status is byte stored after frame data
4927 *
4928 * 7 EOM (end of msg), 1 = last buffer of frame
4929 * 6 Short Frame, 1 = short frame
4930 * 5 Abort, 1 = frame aborted
4931 * 4 Residue, 1 = last byte is partial
4932 * 3 Overrun, 1 = overrun occurred during frame reception
4933 * 2 CRC, 1 = CRC error detected
4934 *
4935 */
4936 status = desc->status;
4937
4938 /* ignore CRC bit if not using CRC (bit is undefined) */
4939 /* Note:CRC is not save to data buffer */
4940 if (info->params.crc_type == HDLC_CRC_NONE)
4941 status &= ~BIT2;
4942
4943 if (framesize == 0 ||
4944 (addr_field != 0xff && addr_field != info->params.addr_filter)) {
4945 /* discard 0 byte frames, this seems to occur sometime
4946 * when remote is idling flags.
4947 */
4948 rx_free_frame_buffers(info, StartIndex, EndIndex);
4949 goto CheckAgain;
4950 }
4951
4952 if (framesize < 2)
4953 status |= BIT6;
4954
4955 if (status & (BIT6+BIT5+BIT3+BIT2)) {
4956 /* received frame has errors,
4957 * update counts and mark frame size as 0
4958 */
4959 if (status & BIT6)
4960 info->icount.rxshort++;
4961 else if (status & BIT5)
4962 info->icount.rxabort++;
4963 else if (status & BIT3)
4964 info->icount.rxover++;
4965 else
4966 info->icount.rxcrc++;
4967
4968 framesize = 0;
4969 #if SYNCLINK_GENERIC_HDLC
4970 {
4971 struct net_device_stats *stats = hdlc_stats(info->netdev);
4972 stats->rx_errors++;
4973 stats->rx_frame_errors++;
4974 }
4975 #endif
4976 }
4977
4978 if ( debug_level >= DEBUG_LEVEL_BH )
4979 printk("%s(%d):%s rx_get_frame() status=%04X size=%d\n",
4980 __FILE__,__LINE__,info->device_name,status,framesize);
4981
4982 if ( debug_level >= DEBUG_LEVEL_DATA )
4983 trace_block(info,info->rx_buf_list_ex[StartIndex].virt_addr,
4984 min_t(int, framesize,SCABUFSIZE),0);
4985
4986 if (framesize) {
4987 if (framesize > info->max_frame_size)
4988 info->icount.rxlong++;
4989 else {
4990 /* copy dma buffer(s) to contiguous intermediate buffer */
4991 int copy_count = framesize;
4992 int index = StartIndex;
4993 unsigned char *ptmp = info->tmp_rx_buf;
4994 info->tmp_rx_buf_count = framesize;
4995
4996 info->icount.rxok++;
4997
4998 while(copy_count) {
4999 int partial_count = min(copy_count,SCABUFSIZE);
5000 memcpy( ptmp,
5001 info->rx_buf_list_ex[index].virt_addr,
5002 partial_count );
5003 ptmp += partial_count;
5004 copy_count -= partial_count;
5005
5006 if ( ++index == info->rx_buf_count )
5007 index = 0;
5008 }
5009
5010 #if SYNCLINK_GENERIC_HDLC
5011 if (info->netcount)
5012 hdlcdev_rx(info,info->tmp_rx_buf,framesize);
5013 else
5014 #endif
5015 ldisc_receive_buf(tty,info->tmp_rx_buf,
5016 info->flag_buf, framesize);
5017 }
5018 }
5019 /* Free the buffers used by this frame. */
5020 rx_free_frame_buffers( info, StartIndex, EndIndex );
5021
5022 ReturnCode = 1;
5023
5024 Cleanup:
5025 if ( info->rx_enabled && info->rx_overflow ) {
5026 /* Receiver is enabled, but needs to restarted due to
5027 * rx buffer overflow. If buffers are empty, restart receiver.
5028 */
5029 if (info->rx_buf_list[EndIndex].status == 0xff) {
5030 spin_lock_irqsave(&info->lock,flags);
5031 rx_start(info);
5032 spin_unlock_irqrestore(&info->lock,flags);
5033 }
5034 }
5035
5036 return ReturnCode;
5037 }
5038
5039 /* load the transmit DMA buffer with data
5040 */
5041 void tx_load_dma_buffer(SLMP_INFO *info, const char *buf, unsigned int count)
5042 {
5043 unsigned short copy_count;
5044 unsigned int i = 0;
5045 SCADESC *desc;
5046 SCADESC_EX *desc_ex;
5047
5048 if ( debug_level >= DEBUG_LEVEL_DATA )
5049 trace_block(info,buf, min_t(int, count,SCABUFSIZE), 1);
5050
5051 /* Copy source buffer to one or more DMA buffers, starting with
5052 * the first transmit dma buffer.
5053 */
5054 for(i=0;;)
5055 {
5056 copy_count = min_t(unsigned short,count,SCABUFSIZE);
5057
5058 desc = &info->tx_buf_list[i];
5059 desc_ex = &info->tx_buf_list_ex[i];
5060
5061 load_pci_memory(info, desc_ex->virt_addr,buf,copy_count);
5062
5063 desc->length = copy_count;
5064 desc->status = 0;
5065
5066 buf += copy_count;
5067 count -= copy_count;
5068
5069 if (!count)
5070 break;
5071
5072 i++;
5073 if (i >= info->tx_buf_count)
5074 i = 0;
5075 }
5076
5077 info->tx_buf_list[i].status = 0x81; /* set EOM and EOT status */
5078 info->last_tx_buf = ++i;
5079 }
5080
5081 int register_test(SLMP_INFO *info)
5082 {
5083 static unsigned char testval[] = {0x00, 0xff, 0xaa, 0x55, 0x69, 0x96};
5084 static unsigned int count = ARRAY_SIZE(testval);
5085 unsigned int i;
5086 int rc = TRUE;
5087 unsigned long flags;
5088
5089 spin_lock_irqsave(&info->lock,flags);
5090 reset_port(info);
5091
5092 /* assume failure */
5093 info->init_error = DiagStatus_AddressFailure;
5094
5095 /* Write bit patterns to various registers but do it out of */
5096 /* sync, then read back and verify values. */
5097
5098 for (i = 0 ; i < count ; i++) {
5099 write_reg(info, TMC, testval[i]);
5100 write_reg(info, IDL, testval[(i+1)%count]);
5101 write_reg(info, SA0, testval[(i+2)%count]);
5102 write_reg(info, SA1, testval[(i+3)%count]);
5103
5104 if ( (read_reg(info, TMC) != testval[i]) ||
5105 (read_reg(info, IDL) != testval[(i+1)%count]) ||
5106 (read_reg(info, SA0) != testval[(i+2)%count]) ||
5107 (read_reg(info, SA1) != testval[(i+3)%count]) )
5108 {
5109 rc = FALSE;
5110 break;
5111 }
5112 }
5113
5114 reset_port(info);
5115 spin_unlock_irqrestore(&info->lock,flags);
5116
5117 return rc;
5118 }
5119
5120 int irq_test(SLMP_INFO *info)
5121 {
5122 unsigned long timeout;
5123 unsigned long flags;
5124
5125 unsigned char timer = (info->port_num & 1) ? TIMER2 : TIMER0;
5126
5127 spin_lock_irqsave(&info->lock,flags);
5128 reset_port(info);
5129
5130 /* assume failure */
5131 info->init_error = DiagStatus_IrqFailure;
5132 info->irq_occurred = FALSE;
5133
5134 /* setup timer0 on SCA0 to interrupt */
5135
5136 /* IER2<7..4> = timer<3..0> interrupt enables (1=enabled) */
5137 write_reg(info, IER2, (unsigned char)((info->port_num & 1) ? BIT6 : BIT4));
5138
5139 write_reg(info, (unsigned char)(timer + TEPR), 0); /* timer expand prescale */
5140 write_reg16(info, (unsigned char)(timer + TCONR), 1); /* timer constant */
5141
5142
5143 /* TMCS, Timer Control/Status Register
5144 *
5145 * 07 CMF, Compare match flag (read only) 1=match
5146 * 06 ECMI, CMF Interrupt Enable: 1=enabled
5147 * 05 Reserved, must be 0
5148 * 04 TME, Timer Enable
5149 * 03..00 Reserved, must be 0
5150 *
5151 * 0101 0000
5152 */
5153 write_reg(info, (unsigned char)(timer + TMCS), 0x50);
5154
5155 spin_unlock_irqrestore(&info->lock,flags);
5156
5157 timeout=100;
5158 while( timeout-- && !info->irq_occurred ) {
5159 msleep_interruptible(10);
5160 }
5161
5162 spin_lock_irqsave(&info->lock,flags);
5163 reset_port(info);
5164 spin_unlock_irqrestore(&info->lock,flags);
5165
5166 return info->irq_occurred;
5167 }
5168
5169 /* initialize individual SCA device (2 ports)
5170 */
5171 static int sca_init(SLMP_INFO *info)
5172 {
5173 /* set wait controller to single mem partition (low), no wait states */
5174 write_reg(info, PABR0, 0); /* wait controller addr boundary 0 */
5175 write_reg(info, PABR1, 0); /* wait controller addr boundary 1 */
5176 write_reg(info, WCRL, 0); /* wait controller low range */
5177 write_reg(info, WCRM, 0); /* wait controller mid range */
5178 write_reg(info, WCRH, 0); /* wait controller high range */
5179
5180 /* DPCR, DMA Priority Control
5181 *
5182 * 07..05 Not used, must be 0
5183 * 04 BRC, bus release condition: 0=all transfers complete
5184 * 03 CCC, channel change condition: 0=every cycle
5185 * 02..00 PR<2..0>, priority 100=round robin
5186 *
5187 * 00000100 = 0x04
5188 */
5189 write_reg(info, DPCR, dma_priority);
5190
5191 /* DMA Master Enable, BIT7: 1=enable all channels */
5192 write_reg(info, DMER, 0x80);
5193
5194 /* enable all interrupt classes */
5195 write_reg(info, IER0, 0xff); /* TxRDY,RxRDY,TxINT,RxINT (ports 0-1) */
5196 write_reg(info, IER1, 0xff); /* DMIB,DMIA (channels 0-3) */
5197 write_reg(info, IER2, 0xf0); /* TIRQ (timers 0-3) */
5198
5199 /* ITCR, interrupt control register
5200 * 07 IPC, interrupt priority, 0=MSCI->DMA
5201 * 06..05 IAK<1..0>, Acknowledge cycle, 00=non-ack cycle
5202 * 04 VOS, Vector Output, 0=unmodified vector
5203 * 03..00 Reserved, must be 0
5204 */
5205 write_reg(info, ITCR, 0);
5206
5207 return TRUE;
5208 }
5209
5210 /* initialize adapter hardware
5211 */
5212 int init_adapter(SLMP_INFO *info)
5213 {
5214 int i;
5215
5216 /* Set BIT30 of Local Control Reg 0x50 to reset SCA */
5217 volatile u32 *MiscCtrl = (u32 *)(info->lcr_base + 0x50);
5218 u32 readval;
5219
5220 info->misc_ctrl_value |= BIT30;
5221 *MiscCtrl = info->misc_ctrl_value;
5222
5223 /*
5224 * Force at least 170ns delay before clearing
5225 * reset bit. Each read from LCR takes at least
5226 * 30ns so 10 times for 300ns to be safe.
5227 */
5228 for(i=0;i<10;i++)
5229 readval = *MiscCtrl;
5230
5231 info->misc_ctrl_value &= ~BIT30;
5232 *MiscCtrl = info->misc_ctrl_value;
5233
5234 /* init control reg (all DTRs off, all clksel=input) */
5235 info->ctrlreg_value = 0xaa;
5236 write_control_reg(info);
5237
5238 {
5239 volatile u32 *LCR1BRDR = (u32 *)(info->lcr_base + 0x2c);
5240 lcr1_brdr_value &= ~(BIT5 + BIT4 + BIT3);
5241
5242 switch(read_ahead_count)
5243 {
5244 case 16:
5245 lcr1_brdr_value |= BIT5 + BIT4 + BIT3;
5246 break;
5247 case 8:
5248 lcr1_brdr_value |= BIT5 + BIT4;
5249 break;
5250 case 4:
5251 lcr1_brdr_value |= BIT5 + BIT3;
5252 break;
5253 case 0:
5254 lcr1_brdr_value |= BIT5;
5255 break;
5256 }
5257
5258 *LCR1BRDR = lcr1_brdr_value;
5259 *MiscCtrl = misc_ctrl_value;
5260 }
5261
5262 sca_init(info->port_array[0]);
5263 sca_init(info->port_array[2]);
5264
5265 return TRUE;
5266 }
5267
5268 /* Loopback an HDLC frame to test the hardware
5269 * interrupt and DMA functions.
5270 */
5271 int loopback_test(SLMP_INFO *info)
5272 {
5273 #define TESTFRAMESIZE 20
5274
5275 unsigned long timeout;
5276 u16 count = TESTFRAMESIZE;
5277 unsigned char buf[TESTFRAMESIZE];
5278 int rc = FALSE;
5279 unsigned long flags;
5280
5281 struct tty_struct *oldtty = info->tty;
5282 u32 speed = info->params.clock_speed;
5283
5284 info->params.clock_speed = 3686400;
5285 info->tty = NULL;
5286
5287 /* assume failure */
5288 info->init_error = DiagStatus_DmaFailure;
5289
5290 /* build and send transmit frame */
5291 for (count = 0; count < TESTFRAMESIZE;++count)
5292 buf[count] = (unsigned char)count;
5293
5294 memset(info->tmp_rx_buf,0,TESTFRAMESIZE);
5295
5296 /* program hardware for HDLC and enabled receiver */
5297 spin_lock_irqsave(&info->lock,flags);
5298 hdlc_mode(info);
5299 enable_loopback(info,1);
5300 rx_start(info);
5301 info->tx_count = count;
5302 tx_load_dma_buffer(info,buf,count);
5303 tx_start(info);
5304 spin_unlock_irqrestore(&info->lock,flags);
5305
5306 /* wait for receive complete */
5307 /* Set a timeout for waiting for interrupt. */
5308 for ( timeout = 100; timeout; --timeout ) {
5309 msleep_interruptible(10);
5310
5311 if (rx_get_frame(info)) {
5312 rc = TRUE;
5313 break;
5314 }
5315 }
5316
5317 /* verify received frame length and contents */
5318 if (rc == TRUE &&
5319 ( info->tmp_rx_buf_count != count ||
5320 memcmp(buf, info->tmp_rx_buf,count))) {
5321 rc = FALSE;
5322 }
5323
5324 spin_lock_irqsave(&info->lock,flags);
5325 reset_adapter(info);
5326 spin_unlock_irqrestore(&info->lock,flags);
5327
5328 info->params.clock_speed = speed;
5329 info->tty = oldtty;
5330
5331 return rc;
5332 }
5333
5334 /* Perform diagnostics on hardware
5335 */
5336 int adapter_test( SLMP_INFO *info )
5337 {
5338 unsigned long flags;
5339 if ( debug_level >= DEBUG_LEVEL_INFO )
5340 printk( "%s(%d):Testing device %s\n",
5341 __FILE__,__LINE__,info->device_name );
5342
5343 spin_lock_irqsave(&info->lock,flags);
5344 init_adapter(info);
5345 spin_unlock_irqrestore(&info->lock,flags);
5346
5347 info->port_array[0]->port_count = 0;
5348
5349 if ( register_test(info->port_array[0]) &&
5350 register_test(info->port_array[1])) {
5351
5352 info->port_array[0]->port_count = 2;
5353
5354 if ( register_test(info->port_array[2]) &&
5355 register_test(info->port_array[3]) )
5356 info->port_array[0]->port_count += 2;
5357 }
5358 else {
5359 printk( "%s(%d):Register test failure for device %s Addr=%08lX\n",
5360 __FILE__,__LINE__,info->device_name, (unsigned long)(info->phys_sca_base));
5361 return -ENODEV;
5362 }
5363
5364 if ( !irq_test(info->port_array[0]) ||
5365 !irq_test(info->port_array[1]) ||
5366 (info->port_count == 4 && !irq_test(info->port_array[2])) ||
5367 (info->port_count == 4 && !irq_test(info->port_array[3]))) {
5368 printk( "%s(%d):Interrupt test failure for device %s IRQ=%d\n",
5369 __FILE__,__LINE__,info->device_name, (unsigned short)(info->irq_level) );
5370 return -ENODEV;
5371 }
5372
5373 if (!loopback_test(info->port_array[0]) ||
5374 !loopback_test(info->port_array[1]) ||
5375 (info->port_count == 4 && !loopback_test(info->port_array[2])) ||
5376 (info->port_count == 4 && !loopback_test(info->port_array[3]))) {
5377 printk( "%s(%d):DMA test failure for device %s\n",
5378 __FILE__,__LINE__,info->device_name);
5379 return -ENODEV;
5380 }
5381
5382 if ( debug_level >= DEBUG_LEVEL_INFO )
5383 printk( "%s(%d):device %s passed diagnostics\n",
5384 __FILE__,__LINE__,info->device_name );
5385
5386 info->port_array[0]->init_error = 0;
5387 info->port_array[1]->init_error = 0;
5388 if ( info->port_count > 2 ) {
5389 info->port_array[2]->init_error = 0;
5390 info->port_array[3]->init_error = 0;
5391 }
5392
5393 return 0;
5394 }
5395
5396 /* Test the shared memory on a PCI adapter.
5397 */
5398 int memory_test(SLMP_INFO *info)
5399 {
5400 static unsigned long testval[] = { 0x0, 0x55555555, 0xaaaaaaaa,
5401 0x66666666, 0x99999999, 0xffffffff, 0x12345678 };
5402 unsigned long count = ARRAY_SIZE(testval);
5403 unsigned long i;
5404 unsigned long limit = SCA_MEM_SIZE/sizeof(unsigned long);
5405 unsigned long * addr = (unsigned long *)info->memory_base;
5406
5407 /* Test data lines with test pattern at one location. */
5408
5409 for ( i = 0 ; i < count ; i++ ) {
5410 *addr = testval[i];
5411 if ( *addr != testval[i] )
5412 return FALSE;
5413 }
5414
5415 /* Test address lines with incrementing pattern over */
5416 /* entire address range. */
5417
5418 for ( i = 0 ; i < limit ; i++ ) {
5419 *addr = i * 4;
5420 addr++;
5421 }
5422
5423 addr = (unsigned long *)info->memory_base;
5424
5425 for ( i = 0 ; i < limit ; i++ ) {
5426 if ( *addr != i * 4 )
5427 return FALSE;
5428 addr++;
5429 }
5430
5431 memset( info->memory_base, 0, SCA_MEM_SIZE );
5432 return TRUE;
5433 }
5434
5435 /* Load data into PCI adapter shared memory.
5436 *
5437 * The PCI9050 releases control of the local bus
5438 * after completing the current read or write operation.
5439 *
5440 * While the PCI9050 write FIFO not empty, the
5441 * PCI9050 treats all of the writes as a single transaction
5442 * and does not release the bus. This causes DMA latency problems
5443 * at high speeds when copying large data blocks to the shared memory.
5444 *
5445 * This function breaks a write into multiple transations by
5446 * interleaving a read which flushes the write FIFO and 'completes'
5447 * the write transation. This allows any pending DMA request to gain control
5448 * of the local bus in a timely fasion.
5449 */
5450 void load_pci_memory(SLMP_INFO *info, char* dest, const char* src, unsigned short count)
5451 {
5452 /* A load interval of 16 allows for 4 32-bit writes at */
5453 /* 136ns each for a maximum latency of 542ns on the local bus.*/
5454
5455 unsigned short interval = count / sca_pci_load_interval;
5456 unsigned short i;
5457
5458 for ( i = 0 ; i < interval ; i++ )
5459 {
5460 memcpy(dest, src, sca_pci_load_interval);
5461 read_status_reg(info);
5462 dest += sca_pci_load_interval;
5463 src += sca_pci_load_interval;
5464 }
5465
5466 memcpy(dest, src, count % sca_pci_load_interval);
5467 }
5468
5469 void trace_block(SLMP_INFO *info,const char* data, int count, int xmit)
5470 {
5471 int i;
5472 int linecount;
5473 if (xmit)
5474 printk("%s tx data:\n",info->device_name);
5475 else
5476 printk("%s rx data:\n",info->device_name);
5477
5478 while(count) {
5479 if (count > 16)
5480 linecount = 16;
5481 else
5482 linecount = count;
5483
5484 for(i=0;i<linecount;i++)
5485 printk("%02X ",(unsigned char)data[i]);
5486 for(;i<17;i++)
5487 printk(" ");
5488 for(i=0;i<linecount;i++) {
5489 if (data[i]>=040 && data[i]<=0176)
5490 printk("%c",data[i]);
5491 else
5492 printk(".");
5493 }
5494 printk("\n");
5495
5496 data += linecount;
5497 count -= linecount;
5498 }
5499 } /* end of trace_block() */
5500
5501 /* called when HDLC frame times out
5502 * update stats and do tx completion processing
5503 */
5504 void tx_timeout(unsigned long context)
5505 {
5506 SLMP_INFO *info = (SLMP_INFO*)context;
5507 unsigned long flags;
5508
5509 if ( debug_level >= DEBUG_LEVEL_INFO )
5510 printk( "%s(%d):%s tx_timeout()\n",
5511 __FILE__,__LINE__,info->device_name);
5512 if(info->tx_active && info->params.mode == MGSL_MODE_HDLC) {
5513 info->icount.txtimeout++;
5514 }
5515 spin_lock_irqsave(&info->lock,flags);
5516 info->tx_active = 0;
5517 info->tx_count = info->tx_put = info->tx_get = 0;
5518
5519 spin_unlock_irqrestore(&info->lock,flags);
5520
5521 #if SYNCLINK_GENERIC_HDLC
5522 if (info->netcount)
5523 hdlcdev_tx_done(info);
5524 else
5525 #endif
5526 bh_transmit(info);
5527 }
5528
5529 /* called to periodically check the DSR/RI modem signal input status
5530 */
5531 void status_timeout(unsigned long context)
5532 {
5533 u16 status = 0;
5534 SLMP_INFO *info = (SLMP_INFO*)context;
5535 unsigned long flags;
5536 unsigned char delta;
5537
5538
5539 spin_lock_irqsave(&info->lock,flags);
5540 get_signals(info);
5541 spin_unlock_irqrestore(&info->lock,flags);
5542
5543 /* check for DSR/RI state change */
5544
5545 delta = info->old_signals ^ info->serial_signals;
5546 info->old_signals = info->serial_signals;
5547
5548 if (delta & SerialSignal_DSR)
5549 status |= MISCSTATUS_DSR_LATCHED|(info->serial_signals&SerialSignal_DSR);
5550
5551 if (delta & SerialSignal_RI)
5552 status |= MISCSTATUS_RI_LATCHED|(info->serial_signals&SerialSignal_RI);
5553
5554 if (delta & SerialSignal_DCD)
5555 status |= MISCSTATUS_DCD_LATCHED|(info->serial_signals&SerialSignal_DCD);
5556
5557 if (delta & SerialSignal_CTS)
5558 status |= MISCSTATUS_CTS_LATCHED|(info->serial_signals&SerialSignal_CTS);
5559
5560 if (status)
5561 isr_io_pin(info,status);
5562
5563 mod_timer(&info->status_timer, jiffies + msecs_to_jiffies(10));
5564 }
5565
5566
5567 /* Register Access Routines -
5568 * All registers are memory mapped
5569 */
5570 #define CALC_REGADDR() \
5571 unsigned char * RegAddr = (unsigned char*)(info->sca_base + Addr); \
5572 if (info->port_num > 1) \
5573 RegAddr += 256; /* port 0-1 SCA0, 2-3 SCA1 */ \
5574 if ( info->port_num & 1) { \
5575 if (Addr > 0x7f) \
5576 RegAddr += 0x40; /* DMA access */ \
5577 else if (Addr > 0x1f && Addr < 0x60) \
5578 RegAddr += 0x20; /* MSCI access */ \
5579 }
5580
5581
5582 unsigned char read_reg(SLMP_INFO * info, unsigned char Addr)
5583 {
5584 CALC_REGADDR();
5585 return *RegAddr;
5586 }
5587 void write_reg(SLMP_INFO * info, unsigned char Addr, unsigned char Value)
5588 {
5589 CALC_REGADDR();
5590 *RegAddr = Value;
5591 }
5592
5593 u16 read_reg16(SLMP_INFO * info, unsigned char Addr)
5594 {
5595 CALC_REGADDR();
5596 return *((u16 *)RegAddr);
5597 }
5598
5599 void write_reg16(SLMP_INFO * info, unsigned char Addr, u16 Value)
5600 {
5601 CALC_REGADDR();
5602 *((u16 *)RegAddr) = Value;
5603 }
5604
5605 unsigned char read_status_reg(SLMP_INFO * info)
5606 {
5607 unsigned char *RegAddr = (unsigned char *)info->statctrl_base;
5608 return *RegAddr;
5609 }
5610
5611 void write_control_reg(SLMP_INFO * info)
5612 {
5613 unsigned char *RegAddr = (unsigned char *)info->statctrl_base;
5614 *RegAddr = info->port_array[0]->ctrlreg_value;
5615 }
5616
5617
5618 static int __devinit synclinkmp_init_one (struct pci_dev *dev,
5619 const struct pci_device_id *ent)
5620 {
5621 if (pci_enable_device(dev)) {
5622 printk("error enabling pci device %p\n", dev);
5623 return -EIO;
5624 }
5625 device_init( ++synclinkmp_adapter_count, dev );
5626 return 0;
5627 }
5628
5629 static void __devexit synclinkmp_remove_one (struct pci_dev *dev)
5630 {
5631 }
WRT350N Kernel Patches