[ALSA] cmipci: make the test for integrated MIDI port address more robust
[wrt350n-kernel.git] / include / asm-powerpc / pgtable-ppc32.h
blob86a54a4a8a2a621beca0bdd096d5291ff0c6255e
1 #ifndef _ASM_POWERPC_PGTABLE_PPC32_H
2 #define _ASM_POWERPC_PGTABLE_PPC32_H
4 #include <asm-generic/pgtable-nopmd.h>
6 #ifndef __ASSEMBLY__
7 #include <linux/sched.h>
8 #include <linux/threads.h>
9 #include <asm/io.h> /* For sub-arch specific PPC_PIN_SIZE */
11 extern unsigned long va_to_phys(unsigned long address);
12 extern pte_t *va_to_pte(unsigned long address);
13 extern unsigned long ioremap_bot, ioremap_base;
14 #endif /* __ASSEMBLY__ */
17 * The PowerPC MMU uses a hash table containing PTEs, together with
18 * a set of 16 segment registers (on 32-bit implementations), to define
19 * the virtual to physical address mapping.
21 * We use the hash table as an extended TLB, i.e. a cache of currently
22 * active mappings. We maintain a two-level page table tree, much
23 * like that used by the i386, for the sake of the Linux memory
24 * management code. Low-level assembler code in hashtable.S
25 * (procedure hash_page) is responsible for extracting ptes from the
26 * tree and putting them into the hash table when necessary, and
27 * updating the accessed and modified bits in the page table tree.
31 * The PowerPC MPC8xx uses a TLB with hardware assisted, software tablewalk.
32 * We also use the two level tables, but we can put the real bits in them
33 * needed for the TLB and tablewalk. These definitions require Mx_CTR.PPM = 0,
34 * Mx_CTR.PPCS = 0, and MD_CTR.TWAM = 1. The level 2 descriptor has
35 * additional page protection (when Mx_CTR.PPCS = 1) that allows TLB hit
36 * based upon user/super access. The TLB does not have accessed nor write
37 * protect. We assume that if the TLB get loaded with an entry it is
38 * accessed, and overload the changed bit for write protect. We use
39 * two bits in the software pte that are supposed to be set to zero in
40 * the TLB entry (24 and 25) for these indicators. Although the level 1
41 * descriptor contains the guarded and writethrough/copyback bits, we can
42 * set these at the page level since they get copied from the Mx_TWC
43 * register when the TLB entry is loaded. We will use bit 27 for guard, since
44 * that is where it exists in the MD_TWC, and bit 26 for writethrough.
45 * These will get masked from the level 2 descriptor at TLB load time, and
46 * copied to the MD_TWC before it gets loaded.
47 * Large page sizes added. We currently support two sizes, 4K and 8M.
48 * This also allows a TLB hander optimization because we can directly
49 * load the PMD into MD_TWC. The 8M pages are only used for kernel
50 * mapping of well known areas. The PMD (PGD) entries contain control
51 * flags in addition to the address, so care must be taken that the
52 * software no longer assumes these are only pointers.
56 * At present, all PowerPC 400-class processors share a similar TLB
57 * architecture. The instruction and data sides share a unified,
58 * 64-entry, fully-associative TLB which is maintained totally under
59 * software control. In addition, the instruction side has a
60 * hardware-managed, 4-entry, fully-associative TLB which serves as a
61 * first level to the shared TLB. These two TLBs are known as the UTLB
62 * and ITLB, respectively (see "mmu.h" for definitions).
66 * The normal case is that PTEs are 32-bits and we have a 1-page
67 * 1024-entry pgdir pointing to 1-page 1024-entry PTE pages. -- paulus
69 * For any >32-bit physical address platform, we can use the following
70 * two level page table layout where the pgdir is 8KB and the MS 13 bits
71 * are an index to the second level table. The combined pgdir/pmd first
72 * level has 2048 entries and the second level has 512 64-bit PTE entries.
73 * -Matt
75 /* PGDIR_SHIFT determines what a top-level page table entry can map */
76 #define PGDIR_SHIFT (PAGE_SHIFT + PTE_SHIFT)
77 #define PGDIR_SIZE (1UL << PGDIR_SHIFT)
78 #define PGDIR_MASK (~(PGDIR_SIZE-1))
81 * entries per page directory level: our page-table tree is two-level, so
82 * we don't really have any PMD directory.
84 #define PTRS_PER_PTE (1 << PTE_SHIFT)
85 #define PTRS_PER_PMD 1
86 #define PTRS_PER_PGD (1 << (32 - PGDIR_SHIFT))
88 #define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE)
89 #define FIRST_USER_ADDRESS 0
91 #define USER_PGD_PTRS (PAGE_OFFSET >> PGDIR_SHIFT)
92 #define KERNEL_PGD_PTRS (PTRS_PER_PGD-USER_PGD_PTRS)
94 #define pte_ERROR(e) \
95 printk("%s:%d: bad pte %llx.\n", __FILE__, __LINE__, \
96 (unsigned long long)pte_val(e))
97 #define pgd_ERROR(e) \
98 printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
101 * Just any arbitrary offset to the start of the vmalloc VM area: the
102 * current 64MB value just means that there will be a 64MB "hole" after the
103 * physical memory until the kernel virtual memory starts. That means that
104 * any out-of-bounds memory accesses will hopefully be caught.
105 * The vmalloc() routines leaves a hole of 4kB between each vmalloced
106 * area for the same reason. ;)
108 * We no longer map larger than phys RAM with the BATs so we don't have
109 * to worry about the VMALLOC_OFFSET causing problems. We do have to worry
110 * about clashes between our early calls to ioremap() that start growing down
111 * from ioremap_base being run into the VM area allocations (growing upwards
112 * from VMALLOC_START). For this reason we have ioremap_bot to check when
113 * we actually run into our mappings setup in the early boot with the VM
114 * system. This really does become a problem for machines with good amounts
115 * of RAM. -- Cort
117 #define VMALLOC_OFFSET (0x1000000) /* 16M */
118 #ifdef PPC_PIN_SIZE
119 #define VMALLOC_START (((_ALIGN((long)high_memory, PPC_PIN_SIZE) + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)))
120 #else
121 #define VMALLOC_START ((((long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)))
122 #endif
123 #define VMALLOC_END ioremap_bot
126 * Bits in a linux-style PTE. These match the bits in the
127 * (hardware-defined) PowerPC PTE as closely as possible.
130 #if defined(CONFIG_40x)
132 /* There are several potential gotchas here. The 40x hardware TLBLO
133 field looks like this:
135 0 1 2 3 4 ... 18 19 20 21 22 23 24 25 26 27 28 29 30 31
136 RPN..................... 0 0 EX WR ZSEL....... W I M G
138 Where possible we make the Linux PTE bits match up with this
140 - bits 20 and 21 must be cleared, because we use 4k pages (40x can
141 support down to 1k pages), this is done in the TLBMiss exception
142 handler.
143 - We use only zones 0 (for kernel pages) and 1 (for user pages)
144 of the 16 available. Bit 24-26 of the TLB are cleared in the TLB
145 miss handler. Bit 27 is PAGE_USER, thus selecting the correct
146 zone.
147 - PRESENT *must* be in the bottom two bits because swap cache
148 entries use the top 30 bits. Because 40x doesn't support SMP
149 anyway, M is irrelevant so we borrow it for PAGE_PRESENT. Bit 30
150 is cleared in the TLB miss handler before the TLB entry is loaded.
151 - All other bits of the PTE are loaded into TLBLO without
152 modification, leaving us only the bits 20, 21, 24, 25, 26, 30 for
153 software PTE bits. We actually use use bits 21, 24, 25, and
154 30 respectively for the software bits: ACCESSED, DIRTY, RW, and
155 PRESENT.
158 /* Definitions for 40x embedded chips. */
159 #define _PAGE_GUARDED 0x001 /* G: page is guarded from prefetch */
160 #define _PAGE_FILE 0x001 /* when !present: nonlinear file mapping */
161 #define _PAGE_PRESENT 0x002 /* software: PTE contains a translation */
162 #define _PAGE_NO_CACHE 0x004 /* I: caching is inhibited */
163 #define _PAGE_WRITETHRU 0x008 /* W: caching is write-through */
164 #define _PAGE_USER 0x010 /* matches one of the zone permission bits */
165 #define _PAGE_RW 0x040 /* software: Writes permitted */
166 #define _PAGE_DIRTY 0x080 /* software: dirty page */
167 #define _PAGE_HWWRITE 0x100 /* hardware: Dirty & RW, set in exception */
168 #define _PAGE_HWEXEC 0x200 /* hardware: EX permission */
169 #define _PAGE_ACCESSED 0x400 /* software: R: page referenced */
171 #define _PMD_PRESENT 0x400 /* PMD points to page of PTEs */
172 #define _PMD_BAD 0x802
173 #define _PMD_SIZE 0x0e0 /* size field, != 0 for large-page PMD entry */
174 #define _PMD_SIZE_4M 0x0c0
175 #define _PMD_SIZE_16M 0x0e0
176 #define PMD_PAGE_SIZE(pmdval) (1024 << (((pmdval) & _PMD_SIZE) >> 4))
178 #elif defined(CONFIG_44x)
180 * Definitions for PPC440
182 * Because of the 3 word TLB entries to support 36-bit addressing,
183 * the attribute are difficult to map in such a fashion that they
184 * are easily loaded during exception processing. I decided to
185 * organize the entry so the ERPN is the only portion in the
186 * upper word of the PTE and the attribute bits below are packed
187 * in as sensibly as they can be in the area below a 4KB page size
188 * oriented RPN. This at least makes it easy to load the RPN and
189 * ERPN fields in the TLB. -Matt
191 * Note that these bits preclude future use of a page size
192 * less than 4KB.
195 * PPC 440 core has following TLB attribute fields;
197 * TLB1:
198 * 0 1 2 3 4 ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
199 * RPN................................. - - - - - - ERPN.......
201 * TLB2:
202 * 0 1 2 3 4 ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
203 * - - - - - - U0 U1 U2 U3 W I M G E - UX UW UR SX SW SR
205 * There are some constrains and options, to decide mapping software bits
206 * into TLB entry.
208 * - PRESENT *must* be in the bottom three bits because swap cache
209 * entries use the top 29 bits for TLB2.
211 * - FILE *must* be in the bottom three bits because swap cache
212 * entries use the top 29 bits for TLB2.
214 * - CACHE COHERENT bit (M) has no effect on PPC440 core, because it
215 * doesn't support SMP. So we can use this as software bit, like
216 * DIRTY.
218 * With the PPC 44x Linux implementation, the 0-11th LSBs of the PTE are used
219 * for memory protection related functions (see PTE structure in
220 * include/asm-ppc/mmu.h). The _PAGE_XXX definitions in this file map to the
221 * above bits. Note that the bit values are CPU specific, not architecture
222 * specific.
224 * The kernel PTE entry holds an arch-dependent swp_entry structure under
225 * certain situations. In other words, in such situations some portion of
226 * the PTE bits are used as a swp_entry. In the PPC implementation, the
227 * 3-24th LSB are shared with swp_entry, however the 0-2nd three LSB still
228 * hold protection values. That means the three protection bits are
229 * reserved for both PTE and SWAP entry at the most significant three
230 * LSBs.
232 * There are three protection bits available for SWAP entry:
233 * _PAGE_PRESENT
234 * _PAGE_FILE
235 * _PAGE_HASHPTE (if HW has)
237 * So those three bits have to be inside of 0-2nd LSB of PTE.
241 #define _PAGE_PRESENT 0x00000001 /* S: PTE valid */
242 #define _PAGE_RW 0x00000002 /* S: Write permission */
243 #define _PAGE_FILE 0x00000004 /* S: nonlinear file mapping */
244 #define _PAGE_ACCESSED 0x00000008 /* S: Page referenced */
245 #define _PAGE_HWWRITE 0x00000010 /* H: Dirty & RW */
246 #define _PAGE_HWEXEC 0x00000020 /* H: Execute permission */
247 #define _PAGE_USER 0x00000040 /* S: User page */
248 #define _PAGE_ENDIAN 0x00000080 /* H: E bit */
249 #define _PAGE_GUARDED 0x00000100 /* H: G bit */
250 #define _PAGE_DIRTY 0x00000200 /* S: Page dirty */
251 #define _PAGE_NO_CACHE 0x00000400 /* H: I bit */
252 #define _PAGE_WRITETHRU 0x00000800 /* H: W bit */
254 /* TODO: Add large page lowmem mapping support */
255 #define _PMD_PRESENT 0
256 #define _PMD_PRESENT_MASK (PAGE_MASK)
257 #define _PMD_BAD (~PAGE_MASK)
259 /* ERPN in a PTE never gets cleared, ignore it */
260 #define _PTE_NONE_MASK 0xffffffff00000000ULL
262 #elif defined(CONFIG_FSL_BOOKE)
264 MMU Assist Register 3:
266 32 33 34 35 36 ... 50 51 52 53 54 55 56 57 58 59 60 61 62 63
267 RPN...................... 0 0 U0 U1 U2 U3 UX SX UW SW UR SR
269 - PRESENT *must* be in the bottom three bits because swap cache
270 entries use the top 29 bits.
272 - FILE *must* be in the bottom three bits because swap cache
273 entries use the top 29 bits.
276 /* Definitions for FSL Book-E Cores */
277 #define _PAGE_PRESENT 0x00001 /* S: PTE contains a translation */
278 #define _PAGE_USER 0x00002 /* S: User page (maps to UR) */
279 #define _PAGE_FILE 0x00002 /* S: when !present: nonlinear file mapping */
280 #define _PAGE_ACCESSED 0x00004 /* S: Page referenced */
281 #define _PAGE_HWWRITE 0x00008 /* H: Dirty & RW, set in exception */
282 #define _PAGE_RW 0x00010 /* S: Write permission */
283 #define _PAGE_HWEXEC 0x00020 /* H: UX permission */
285 #define _PAGE_ENDIAN 0x00040 /* H: E bit */
286 #define _PAGE_GUARDED 0x00080 /* H: G bit */
287 #define _PAGE_COHERENT 0x00100 /* H: M bit */
288 #define _PAGE_NO_CACHE 0x00200 /* H: I bit */
289 #define _PAGE_WRITETHRU 0x00400 /* H: W bit */
291 #ifdef CONFIG_PTE_64BIT
292 #define _PAGE_DIRTY 0x08000 /* S: Page dirty */
294 /* ERPN in a PTE never gets cleared, ignore it */
295 #define _PTE_NONE_MASK 0xffffffffffff0000ULL
296 #else
297 #define _PAGE_DIRTY 0x00800 /* S: Page dirty */
298 #endif
300 #define _PMD_PRESENT 0
301 #define _PMD_PRESENT_MASK (PAGE_MASK)
302 #define _PMD_BAD (~PAGE_MASK)
304 #elif defined(CONFIG_8xx)
305 /* Definitions for 8xx embedded chips. */
306 #define _PAGE_PRESENT 0x0001 /* Page is valid */
307 #define _PAGE_FILE 0x0002 /* when !present: nonlinear file mapping */
308 #define _PAGE_NO_CACHE 0x0002 /* I: cache inhibit */
309 #define _PAGE_SHARED 0x0004 /* No ASID (context) compare */
311 /* These five software bits must be masked out when the entry is loaded
312 * into the TLB.
314 #define _PAGE_EXEC 0x0008 /* software: i-cache coherency required */
315 #define _PAGE_GUARDED 0x0010 /* software: guarded access */
316 #define _PAGE_DIRTY 0x0020 /* software: page changed */
317 #define _PAGE_RW 0x0040 /* software: user write access allowed */
318 #define _PAGE_ACCESSED 0x0080 /* software: page referenced */
320 /* Setting any bits in the nibble with the follow two controls will
321 * require a TLB exception handler change. It is assumed unused bits
322 * are always zero.
324 #define _PAGE_HWWRITE 0x0100 /* h/w write enable: never set in Linux PTE */
325 #define _PAGE_USER 0x0800 /* One of the PP bits, the other is USER&~RW */
327 #define _PMD_PRESENT 0x0001
328 #define _PMD_BAD 0x0ff0
329 #define _PMD_PAGE_MASK 0x000c
330 #define _PMD_PAGE_8M 0x000c
333 * The 8xx TLB miss handler allegedly sets _PAGE_ACCESSED in the PTE
334 * for an address even if _PAGE_PRESENT is not set, as a performance
335 * optimization. This is a bug if you ever want to use swap unless
336 * _PAGE_ACCESSED is 2, which it isn't, or unless you have 8xx-specific
337 * definitions for __swp_entry etc. below, which would be gross.
338 * -- paulus
340 #define _PTE_NONE_MASK _PAGE_ACCESSED
342 #else /* CONFIG_6xx */
343 /* Definitions for 60x, 740/750, etc. */
344 #define _PAGE_PRESENT 0x001 /* software: pte contains a translation */
345 #define _PAGE_HASHPTE 0x002 /* hash_page has made an HPTE for this pte */
346 #define _PAGE_FILE 0x004 /* when !present: nonlinear file mapping */
347 #define _PAGE_USER 0x004 /* usermode access allowed */
348 #define _PAGE_GUARDED 0x008 /* G: prohibit speculative access */
349 #define _PAGE_COHERENT 0x010 /* M: enforce memory coherence (SMP systems) */
350 #define _PAGE_NO_CACHE 0x020 /* I: cache inhibit */
351 #define _PAGE_WRITETHRU 0x040 /* W: cache write-through */
352 #define _PAGE_DIRTY 0x080 /* C: page changed */
353 #define _PAGE_ACCESSED 0x100 /* R: page referenced */
354 #define _PAGE_EXEC 0x200 /* software: i-cache coherency required */
355 #define _PAGE_RW 0x400 /* software: user write access allowed */
357 #define _PTE_NONE_MASK _PAGE_HASHPTE
359 #define _PMD_PRESENT 0
360 #define _PMD_PRESENT_MASK (PAGE_MASK)
361 #define _PMD_BAD (~PAGE_MASK)
362 #endif
365 * Some bits are only used on some cpu families...
367 #ifndef _PAGE_HASHPTE
368 #define _PAGE_HASHPTE 0
369 #endif
370 #ifndef _PTE_NONE_MASK
371 #define _PTE_NONE_MASK 0
372 #endif
373 #ifndef _PAGE_SHARED
374 #define _PAGE_SHARED 0
375 #endif
376 #ifndef _PAGE_HWWRITE
377 #define _PAGE_HWWRITE 0
378 #endif
379 #ifndef _PAGE_HWEXEC
380 #define _PAGE_HWEXEC 0
381 #endif
382 #ifndef _PAGE_EXEC
383 #define _PAGE_EXEC 0
384 #endif
385 #ifndef _PMD_PRESENT_MASK
386 #define _PMD_PRESENT_MASK _PMD_PRESENT
387 #endif
388 #ifndef _PMD_SIZE
389 #define _PMD_SIZE 0
390 #define PMD_PAGE_SIZE(pmd) bad_call_to_PMD_PAGE_SIZE()
391 #endif
393 #define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
396 * Note: the _PAGE_COHERENT bit automatically gets set in the hardware
397 * PTE if CONFIG_SMP is defined (hash_page does this); there is no need
398 * to have it in the Linux PTE, and in fact the bit could be reused for
399 * another purpose. -- paulus.
402 #ifdef CONFIG_44x
403 #define _PAGE_BASE (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_GUARDED)
404 #else
405 #define _PAGE_BASE (_PAGE_PRESENT | _PAGE_ACCESSED)
406 #endif
407 #define _PAGE_WRENABLE (_PAGE_RW | _PAGE_DIRTY | _PAGE_HWWRITE)
408 #define _PAGE_KERNEL (_PAGE_BASE | _PAGE_SHARED | _PAGE_WRENABLE)
410 #ifdef CONFIG_PPC_STD_MMU
411 /* On standard PPC MMU, no user access implies kernel read/write access,
412 * so to write-protect kernel memory we must turn on user access */
413 #define _PAGE_KERNEL_RO (_PAGE_BASE | _PAGE_SHARED | _PAGE_USER)
414 #else
415 #define _PAGE_KERNEL_RO (_PAGE_BASE | _PAGE_SHARED)
416 #endif
418 #define _PAGE_IO (_PAGE_KERNEL | _PAGE_NO_CACHE | _PAGE_GUARDED)
419 #define _PAGE_RAM (_PAGE_KERNEL | _PAGE_HWEXEC)
421 #if defined(CONFIG_KGDB) || defined(CONFIG_XMON) || defined(CONFIG_BDI_SWITCH)
422 /* We want the debuggers to be able to set breakpoints anywhere, so
423 * don't write protect the kernel text */
424 #define _PAGE_RAM_TEXT _PAGE_RAM
425 #else
426 #define _PAGE_RAM_TEXT (_PAGE_KERNEL_RO | _PAGE_HWEXEC)
427 #endif
429 #define PAGE_NONE __pgprot(_PAGE_BASE)
430 #define PAGE_READONLY __pgprot(_PAGE_BASE | _PAGE_USER)
431 #define PAGE_READONLY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
432 #define PAGE_SHARED __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW)
433 #define PAGE_SHARED_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW | _PAGE_EXEC)
434 #define PAGE_COPY __pgprot(_PAGE_BASE | _PAGE_USER)
435 #define PAGE_COPY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
437 #define PAGE_KERNEL __pgprot(_PAGE_RAM)
438 #define PAGE_KERNEL_NOCACHE __pgprot(_PAGE_IO)
441 * The PowerPC can only do execute protection on a segment (256MB) basis,
442 * not on a page basis. So we consider execute permission the same as read.
443 * Also, write permissions imply read permissions.
444 * This is the closest we can get..
446 #define __P000 PAGE_NONE
447 #define __P001 PAGE_READONLY_X
448 #define __P010 PAGE_COPY
449 #define __P011 PAGE_COPY_X
450 #define __P100 PAGE_READONLY
451 #define __P101 PAGE_READONLY_X
452 #define __P110 PAGE_COPY
453 #define __P111 PAGE_COPY_X
455 #define __S000 PAGE_NONE
456 #define __S001 PAGE_READONLY_X
457 #define __S010 PAGE_SHARED
458 #define __S011 PAGE_SHARED_X
459 #define __S100 PAGE_READONLY
460 #define __S101 PAGE_READONLY_X
461 #define __S110 PAGE_SHARED
462 #define __S111 PAGE_SHARED_X
464 #ifndef __ASSEMBLY__
465 /* Make sure we get a link error if PMD_PAGE_SIZE is ever called on a
466 * kernel without large page PMD support */
467 extern unsigned long bad_call_to_PMD_PAGE_SIZE(void);
470 * Conversions between PTE values and page frame numbers.
473 /* in some case we want to additionaly adjust where the pfn is in the pte to
474 * allow room for more flags */
475 #if defined(CONFIG_FSL_BOOKE) && defined(CONFIG_PTE_64BIT)
476 #define PFN_SHIFT_OFFSET (PAGE_SHIFT + 8)
477 #else
478 #define PFN_SHIFT_OFFSET (PAGE_SHIFT)
479 #endif
481 #define pte_pfn(x) (pte_val(x) >> PFN_SHIFT_OFFSET)
482 #define pte_page(x) pfn_to_page(pte_pfn(x))
484 #define pfn_pte(pfn, prot) __pte(((pte_basic_t)(pfn) << PFN_SHIFT_OFFSET) |\
485 pgprot_val(prot))
486 #define mk_pte(page, prot) pfn_pte(page_to_pfn(page), prot)
487 #endif /* __ASSEMBLY__ */
489 #define pte_none(pte) ((pte_val(pte) & ~_PTE_NONE_MASK) == 0)
490 #define pte_present(pte) (pte_val(pte) & _PAGE_PRESENT)
491 #define pte_clear(mm,addr,ptep) do { set_pte_at((mm), (addr), (ptep), __pte(0)); } while (0)
493 #define pmd_none(pmd) (!pmd_val(pmd))
494 #define pmd_bad(pmd) (pmd_val(pmd) & _PMD_BAD)
495 #define pmd_present(pmd) (pmd_val(pmd) & _PMD_PRESENT_MASK)
496 #define pmd_clear(pmdp) do { pmd_val(*(pmdp)) = 0; } while (0)
498 #ifndef __ASSEMBLY__
500 * The following only work if pte_present() is true.
501 * Undefined behaviour if not..
503 static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_RW; }
504 static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; }
505 static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; }
506 static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; }
508 static inline void pte_uncache(pte_t pte) { pte_val(pte) |= _PAGE_NO_CACHE; }
509 static inline void pte_cache(pte_t pte) { pte_val(pte) &= ~_PAGE_NO_CACHE; }
511 static inline pte_t pte_wrprotect(pte_t pte) {
512 pte_val(pte) &= ~(_PAGE_RW | _PAGE_HWWRITE); return pte; }
513 static inline pte_t pte_mkclean(pte_t pte) {
514 pte_val(pte) &= ~(_PAGE_DIRTY | _PAGE_HWWRITE); return pte; }
515 static inline pte_t pte_mkold(pte_t pte) {
516 pte_val(pte) &= ~_PAGE_ACCESSED; return pte; }
518 static inline pte_t pte_mkwrite(pte_t pte) {
519 pte_val(pte) |= _PAGE_RW; return pte; }
520 static inline pte_t pte_mkdirty(pte_t pte) {
521 pte_val(pte) |= _PAGE_DIRTY; return pte; }
522 static inline pte_t pte_mkyoung(pte_t pte) {
523 pte_val(pte) |= _PAGE_ACCESSED; return pte; }
525 static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
527 pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot);
528 return pte;
532 * When flushing the tlb entry for a page, we also need to flush the hash
533 * table entry. flush_hash_pages is assembler (for speed) in hashtable.S.
535 extern int flush_hash_pages(unsigned context, unsigned long va,
536 unsigned long pmdval, int count);
538 /* Add an HPTE to the hash table */
539 extern void add_hash_page(unsigned context, unsigned long va,
540 unsigned long pmdval);
543 * Atomic PTE updates.
545 * pte_update clears and sets bit atomically, and returns
546 * the old pte value. In the 64-bit PTE case we lock around the
547 * low PTE word since we expect ALL flag bits to be there
549 #ifndef CONFIG_PTE_64BIT
550 static inline unsigned long pte_update(pte_t *p, unsigned long clr,
551 unsigned long set)
553 unsigned long old, tmp;
555 __asm__ __volatile__("\
556 1: lwarx %0,0,%3\n\
557 andc %1,%0,%4\n\
558 or %1,%1,%5\n"
559 PPC405_ERR77(0,%3)
560 " stwcx. %1,0,%3\n\
561 bne- 1b"
562 : "=&r" (old), "=&r" (tmp), "=m" (*p)
563 : "r" (p), "r" (clr), "r" (set), "m" (*p)
564 : "cc" );
565 return old;
567 #else
568 static inline unsigned long long pte_update(pte_t *p, unsigned long clr,
569 unsigned long set)
571 unsigned long long old;
572 unsigned long tmp;
574 __asm__ __volatile__("\
575 1: lwarx %L0,0,%4\n\
576 lwzx %0,0,%3\n\
577 andc %1,%L0,%5\n\
578 or %1,%1,%6\n"
579 PPC405_ERR77(0,%3)
580 " stwcx. %1,0,%4\n\
581 bne- 1b"
582 : "=&r" (old), "=&r" (tmp), "=m" (*p)
583 : "r" (p), "r" ((unsigned long)(p) + 4), "r" (clr), "r" (set), "m" (*p)
584 : "cc" );
585 return old;
587 #endif
590 * set_pte stores a linux PTE into the linux page table.
591 * On machines which use an MMU hash table we avoid changing the
592 * _PAGE_HASHPTE bit.
594 static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
595 pte_t *ptep, pte_t pte)
597 #if _PAGE_HASHPTE != 0
598 pte_update(ptep, ~_PAGE_HASHPTE, pte_val(pte) & ~_PAGE_HASHPTE);
599 #else
600 *ptep = pte;
601 #endif
605 * 2.6 calles this without flushing the TLB entry, this is wrong
606 * for our hash-based implementation, we fix that up here
608 #define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
609 static inline int __ptep_test_and_clear_young(unsigned int context, unsigned long addr, pte_t *ptep)
611 unsigned long old;
612 old = pte_update(ptep, _PAGE_ACCESSED, 0);
613 #if _PAGE_HASHPTE != 0
614 if (old & _PAGE_HASHPTE) {
615 unsigned long ptephys = __pa(ptep) & PAGE_MASK;
616 flush_hash_pages(context, addr, ptephys, 1);
618 #endif
619 return (old & _PAGE_ACCESSED) != 0;
621 #define ptep_test_and_clear_young(__vma, __addr, __ptep) \
622 __ptep_test_and_clear_young((__vma)->vm_mm->context.id, __addr, __ptep)
624 #define __HAVE_ARCH_PTEP_GET_AND_CLEAR
625 static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
626 pte_t *ptep)
628 return __pte(pte_update(ptep, ~_PAGE_HASHPTE, 0));
631 #define __HAVE_ARCH_PTEP_SET_WRPROTECT
632 static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr,
633 pte_t *ptep)
635 pte_update(ptep, (_PAGE_RW | _PAGE_HWWRITE), 0);
638 #define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
639 static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry, int dirty)
641 unsigned long bits = pte_val(entry) &
642 (_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW);
643 pte_update(ptep, 0, bits);
646 #define ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \
647 ({ \
648 int __changed = !pte_same(*(__ptep), __entry); \
649 if (__changed) { \
650 __ptep_set_access_flags(__ptep, __entry, __dirty); \
651 flush_tlb_page_nohash(__vma, __address); \
653 __changed; \
657 * Macro to mark a page protection value as "uncacheable".
659 #define pgprot_noncached(prot) (__pgprot(pgprot_val(prot) | _PAGE_NO_CACHE | _PAGE_GUARDED))
661 struct file;
662 extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
663 unsigned long size, pgprot_t vma_prot);
664 #define __HAVE_PHYS_MEM_ACCESS_PROT
666 #define __HAVE_ARCH_PTE_SAME
667 #define pte_same(A,B) (((pte_val(A) ^ pte_val(B)) & ~_PAGE_HASHPTE) == 0)
670 * Note that on Book E processors, the pmd contains the kernel virtual
671 * (lowmem) address of the pte page. The physical address is less useful
672 * because everything runs with translation enabled (even the TLB miss
673 * handler). On everything else the pmd contains the physical address
674 * of the pte page. -- paulus
676 #ifndef CONFIG_BOOKE
677 #define pmd_page_vaddr(pmd) \
678 ((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
679 #define pmd_page(pmd) \
680 (mem_map + (pmd_val(pmd) >> PAGE_SHIFT))
681 #else
682 #define pmd_page_vaddr(pmd) \
683 ((unsigned long) (pmd_val(pmd) & PAGE_MASK))
684 #define pmd_page(pmd) \
685 (mem_map + (__pa(pmd_val(pmd)) >> PAGE_SHIFT))
686 #endif
688 /* to find an entry in a kernel page-table-directory */
689 #define pgd_offset_k(address) pgd_offset(&init_mm, address)
691 /* to find an entry in a page-table-directory */
692 #define pgd_index(address) ((address) >> PGDIR_SHIFT)
693 #define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address))
695 /* Find an entry in the third-level page table.. */
696 #define pte_index(address) \
697 (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
698 #define pte_offset_kernel(dir, addr) \
699 ((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(addr))
700 #define pte_offset_map(dir, addr) \
701 ((pte_t *) kmap_atomic(pmd_page(*(dir)), KM_PTE0) + pte_index(addr))
702 #define pte_offset_map_nested(dir, addr) \
703 ((pte_t *) kmap_atomic(pmd_page(*(dir)), KM_PTE1) + pte_index(addr))
705 #define pte_unmap(pte) kunmap_atomic(pte, KM_PTE0)
706 #define pte_unmap_nested(pte) kunmap_atomic(pte, KM_PTE1)
709 * Encode and decode a swap entry.
710 * Note that the bits we use in a PTE for representing a swap entry
711 * must not include the _PAGE_PRESENT bit, the _PAGE_FILE bit, or the
712 *_PAGE_HASHPTE bit (if used). -- paulus
714 #define __swp_type(entry) ((entry).val & 0x1f)
715 #define __swp_offset(entry) ((entry).val >> 5)
716 #define __swp_entry(type, offset) ((swp_entry_t) { (type) | ((offset) << 5) })
717 #define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) >> 3 })
718 #define __swp_entry_to_pte(x) ((pte_t) { (x).val << 3 })
720 /* Encode and decode a nonlinear file mapping entry */
721 #define PTE_FILE_MAX_BITS 29
722 #define pte_to_pgoff(pte) (pte_val(pte) >> 3)
723 #define pgoff_to_pte(off) ((pte_t) { ((off) << 3) | _PAGE_FILE })
726 * No page table caches to initialise
728 #define pgtable_cache_init() do { } while (0)
730 extern int get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep,
731 pmd_t **pmdp);
733 #endif /* !__ASSEMBLY__ */
735 #endif /* _ASM_POWERPC_PGTABLE_PPC32_H */