x86: cpa: move clflush_cache_range()
[wrt350n-kernel.git] / drivers / char / agp / generic.c
blob64b2f6d7059dc96f494e49ace44a2601937d5a85
1 /*
2 * AGPGART driver.
3 * Copyright (C) 2004 Silicon Graphics, Inc.
4 * Copyright (C) 2002-2005 Dave Jones.
5 * Copyright (C) 1999 Jeff Hartmann.
6 * Copyright (C) 1999 Precision Insight, Inc.
7 * Copyright (C) 1999 Xi Graphics, Inc.
9 * Permission is hereby granted, free of charge, to any person obtaining a
10 * copy of this software and associated documentation files (the "Software"),
11 * to deal in the Software without restriction, including without limitation
12 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
13 * and/or sell copies of the Software, and to permit persons to whom the
14 * Software is furnished to do so, subject to the following conditions:
16 * The above copyright notice and this permission notice shall be included
17 * in all copies or substantial portions of the Software.
19 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
20 * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
21 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
22 * JEFF HARTMANN, OR ANY OTHER CONTRIBUTORS BE LIABLE FOR ANY CLAIM,
23 * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
24 * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE
25 * OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
27 * TODO:
28 * - Allocate more than order 0 pages to avoid too much linear map splitting.
30 #include <linux/module.h>
31 #include <linux/pci.h>
32 #include <linux/init.h>
33 #include <linux/pagemap.h>
34 #include <linux/miscdevice.h>
35 #include <linux/pm.h>
36 #include <linux/agp_backend.h>
37 #include <linux/vmalloc.h>
38 #include <linux/dma-mapping.h>
39 #include <linux/mm.h>
40 #include <linux/sched.h>
41 #include <asm/io.h>
42 #include <asm/cacheflush.h>
43 #include <asm/pgtable.h>
44 #include "agp.h"
46 __u32 *agp_gatt_table;
47 int agp_memory_reserved;
50 * Needed by the Nforce GART driver for the time being. Would be
51 * nice to do this some other way instead of needing this export.
53 EXPORT_SYMBOL_GPL(agp_memory_reserved);
56 * Generic routines for handling agp_memory structures -
57 * They use the basic page allocation routines to do the brunt of the work.
60 void agp_free_key(int key)
62 if (key < 0)
63 return;
65 if (key < MAXKEY)
66 clear_bit(key, agp_bridge->key_list);
68 EXPORT_SYMBOL(agp_free_key);
71 static int agp_get_key(void)
73 int bit;
75 bit = find_first_zero_bit(agp_bridge->key_list, MAXKEY);
76 if (bit < MAXKEY) {
77 set_bit(bit, agp_bridge->key_list);
78 return bit;
80 return -1;
84 * Use kmalloc if possible for the page list. Otherwise fall back to
85 * vmalloc. This speeds things up and also saves memory for small AGP
86 * regions.
89 void agp_alloc_page_array(size_t size, struct agp_memory *mem)
91 mem->memory = NULL;
92 mem->vmalloc_flag = 0;
94 if (size <= 2*PAGE_SIZE)
95 mem->memory = kmalloc(size, GFP_KERNEL | __GFP_NORETRY);
96 if (mem->memory == NULL) {
97 mem->memory = vmalloc(size);
98 mem->vmalloc_flag = 1;
101 EXPORT_SYMBOL(agp_alloc_page_array);
103 void agp_free_page_array(struct agp_memory *mem)
105 if (mem->vmalloc_flag) {
106 vfree(mem->memory);
107 } else {
108 kfree(mem->memory);
111 EXPORT_SYMBOL(agp_free_page_array);
114 static struct agp_memory *agp_create_user_memory(unsigned long num_agp_pages)
116 struct agp_memory *new;
117 unsigned long alloc_size = num_agp_pages*sizeof(struct page *);
119 new = kzalloc(sizeof(struct agp_memory), GFP_KERNEL);
120 if (new == NULL)
121 return NULL;
123 new->key = agp_get_key();
125 if (new->key < 0) {
126 kfree(new);
127 return NULL;
130 agp_alloc_page_array(alloc_size, new);
132 if (new->memory == NULL) {
133 agp_free_key(new->key);
134 kfree(new);
135 return NULL;
137 new->num_scratch_pages = 0;
138 return new;
141 struct agp_memory *agp_create_memory(int scratch_pages)
143 struct agp_memory *new;
145 new = kzalloc(sizeof(struct agp_memory), GFP_KERNEL);
146 if (new == NULL)
147 return NULL;
149 new->key = agp_get_key();
151 if (new->key < 0) {
152 kfree(new);
153 return NULL;
156 agp_alloc_page_array(PAGE_SIZE * scratch_pages, new);
158 if (new->memory == NULL) {
159 agp_free_key(new->key);
160 kfree(new);
161 return NULL;
163 new->num_scratch_pages = scratch_pages;
164 new->type = AGP_NORMAL_MEMORY;
165 return new;
167 EXPORT_SYMBOL(agp_create_memory);
170 * agp_free_memory - free memory associated with an agp_memory pointer.
172 * @curr: agp_memory pointer to be freed.
174 * It is the only function that can be called when the backend is not owned
175 * by the caller. (So it can free memory on client death.)
177 void agp_free_memory(struct agp_memory *curr)
179 size_t i;
181 if (curr == NULL)
182 return;
184 if (curr->is_bound == TRUE)
185 agp_unbind_memory(curr);
187 if (curr->type >= AGP_USER_TYPES) {
188 agp_generic_free_by_type(curr);
189 return;
192 if (curr->type != 0) {
193 curr->bridge->driver->free_by_type(curr);
194 return;
196 if (curr->page_count != 0) {
197 for (i = 0; i < curr->page_count; i++) {
198 curr->bridge->driver->agp_destroy_page(gart_to_virt(curr->memory[i]), AGP_PAGE_DESTROY_UNMAP);
200 flush_agp_mappings();
201 for (i = 0; i < curr->page_count; i++) {
202 curr->bridge->driver->agp_destroy_page(gart_to_virt(curr->memory[i]), AGP_PAGE_DESTROY_FREE);
205 agp_free_key(curr->key);
206 agp_free_page_array(curr);
207 kfree(curr);
209 EXPORT_SYMBOL(agp_free_memory);
211 #define ENTRIES_PER_PAGE (PAGE_SIZE / sizeof(unsigned long))
214 * agp_allocate_memory - allocate a group of pages of a certain type.
216 * @page_count: size_t argument of the number of pages
217 * @type: u32 argument of the type of memory to be allocated.
219 * Every agp bridge device will allow you to allocate AGP_NORMAL_MEMORY which
220 * maps to physical ram. Any other type is device dependent.
222 * It returns NULL whenever memory is unavailable.
224 struct agp_memory *agp_allocate_memory(struct agp_bridge_data *bridge,
225 size_t page_count, u32 type)
227 int scratch_pages;
228 struct agp_memory *new;
229 size_t i;
231 if (!bridge)
232 return NULL;
234 if ((atomic_read(&bridge->current_memory_agp) + page_count) > bridge->max_memory_agp)
235 return NULL;
237 if (type >= AGP_USER_TYPES) {
238 new = agp_generic_alloc_user(page_count, type);
239 if (new)
240 new->bridge = bridge;
241 return new;
244 if (type != 0) {
245 new = bridge->driver->alloc_by_type(page_count, type);
246 if (new)
247 new->bridge = bridge;
248 return new;
251 scratch_pages = (page_count + ENTRIES_PER_PAGE - 1) / ENTRIES_PER_PAGE;
253 new = agp_create_memory(scratch_pages);
255 if (new == NULL)
256 return NULL;
258 for (i = 0; i < page_count; i++) {
259 void *addr = bridge->driver->agp_alloc_page(bridge);
261 if (addr == NULL) {
262 agp_free_memory(new);
263 return NULL;
265 new->memory[i] = virt_to_gart(addr);
266 new->page_count++;
268 new->bridge = bridge;
270 flush_agp_mappings();
272 return new;
274 EXPORT_SYMBOL(agp_allocate_memory);
277 /* End - Generic routines for handling agp_memory structures */
280 static int agp_return_size(void)
282 int current_size;
283 void *temp;
285 temp = agp_bridge->current_size;
287 switch (agp_bridge->driver->size_type) {
288 case U8_APER_SIZE:
289 current_size = A_SIZE_8(temp)->size;
290 break;
291 case U16_APER_SIZE:
292 current_size = A_SIZE_16(temp)->size;
293 break;
294 case U32_APER_SIZE:
295 current_size = A_SIZE_32(temp)->size;
296 break;
297 case LVL2_APER_SIZE:
298 current_size = A_SIZE_LVL2(temp)->size;
299 break;
300 case FIXED_APER_SIZE:
301 current_size = A_SIZE_FIX(temp)->size;
302 break;
303 default:
304 current_size = 0;
305 break;
308 current_size -= (agp_memory_reserved / (1024*1024));
309 if (current_size <0)
310 current_size = 0;
311 return current_size;
315 int agp_num_entries(void)
317 int num_entries;
318 void *temp;
320 temp = agp_bridge->current_size;
322 switch (agp_bridge->driver->size_type) {
323 case U8_APER_SIZE:
324 num_entries = A_SIZE_8(temp)->num_entries;
325 break;
326 case U16_APER_SIZE:
327 num_entries = A_SIZE_16(temp)->num_entries;
328 break;
329 case U32_APER_SIZE:
330 num_entries = A_SIZE_32(temp)->num_entries;
331 break;
332 case LVL2_APER_SIZE:
333 num_entries = A_SIZE_LVL2(temp)->num_entries;
334 break;
335 case FIXED_APER_SIZE:
336 num_entries = A_SIZE_FIX(temp)->num_entries;
337 break;
338 default:
339 num_entries = 0;
340 break;
343 num_entries -= agp_memory_reserved>>PAGE_SHIFT;
344 if (num_entries<0)
345 num_entries = 0;
346 return num_entries;
348 EXPORT_SYMBOL_GPL(agp_num_entries);
352 * agp_copy_info - copy bridge state information
354 * @info: agp_kern_info pointer. The caller should insure that this pointer is valid.
356 * This function copies information about the agp bridge device and the state of
357 * the agp backend into an agp_kern_info pointer.
359 int agp_copy_info(struct agp_bridge_data *bridge, struct agp_kern_info *info)
361 memset(info, 0, sizeof(struct agp_kern_info));
362 if (!bridge) {
363 info->chipset = NOT_SUPPORTED;
364 return -EIO;
367 info->version.major = bridge->version->major;
368 info->version.minor = bridge->version->minor;
369 info->chipset = SUPPORTED;
370 info->device = bridge->dev;
371 if (bridge->mode & AGPSTAT_MODE_3_0)
372 info->mode = bridge->mode & ~AGP3_RESERVED_MASK;
373 else
374 info->mode = bridge->mode & ~AGP2_RESERVED_MASK;
375 info->aper_base = bridge->gart_bus_addr;
376 info->aper_size = agp_return_size();
377 info->max_memory = bridge->max_memory_agp;
378 info->current_memory = atomic_read(&bridge->current_memory_agp);
379 info->cant_use_aperture = bridge->driver->cant_use_aperture;
380 info->vm_ops = bridge->vm_ops;
381 info->page_mask = ~0UL;
382 return 0;
384 EXPORT_SYMBOL(agp_copy_info);
386 /* End - Routine to copy over information structure */
389 * Routines for handling swapping of agp_memory into the GATT -
390 * These routines take agp_memory and insert them into the GATT.
391 * They call device specific routines to actually write to the GATT.
395 * agp_bind_memory - Bind an agp_memory structure into the GATT.
397 * @curr: agp_memory pointer
398 * @pg_start: an offset into the graphics aperture translation table
400 * It returns -EINVAL if the pointer == NULL.
401 * It returns -EBUSY if the area of the table requested is already in use.
403 int agp_bind_memory(struct agp_memory *curr, off_t pg_start)
405 int ret_val;
407 if (curr == NULL)
408 return -EINVAL;
410 if (curr->is_bound == TRUE) {
411 printk(KERN_INFO PFX "memory %p is already bound!\n", curr);
412 return -EINVAL;
414 if (curr->is_flushed == FALSE) {
415 curr->bridge->driver->cache_flush();
416 curr->is_flushed = TRUE;
418 ret_val = curr->bridge->driver->insert_memory(curr, pg_start, curr->type);
420 if (ret_val != 0)
421 return ret_val;
423 curr->is_bound = TRUE;
424 curr->pg_start = pg_start;
425 return 0;
427 EXPORT_SYMBOL(agp_bind_memory);
431 * agp_unbind_memory - Removes an agp_memory structure from the GATT
433 * @curr: agp_memory pointer to be removed from the GATT.
435 * It returns -EINVAL if this piece of agp_memory is not currently bound to
436 * the graphics aperture translation table or if the agp_memory pointer == NULL
438 int agp_unbind_memory(struct agp_memory *curr)
440 int ret_val;
442 if (curr == NULL)
443 return -EINVAL;
445 if (curr->is_bound != TRUE) {
446 printk(KERN_INFO PFX "memory %p was not bound!\n", curr);
447 return -EINVAL;
450 ret_val = curr->bridge->driver->remove_memory(curr, curr->pg_start, curr->type);
452 if (ret_val != 0)
453 return ret_val;
455 curr->is_bound = FALSE;
456 curr->pg_start = 0;
457 return 0;
459 EXPORT_SYMBOL(agp_unbind_memory);
461 /* End - Routines for handling swapping of agp_memory into the GATT */
464 /* Generic Agp routines - Start */
465 static void agp_v2_parse_one(u32 *requested_mode, u32 *bridge_agpstat, u32 *vga_agpstat)
467 u32 tmp;
469 if (*requested_mode & AGP2_RESERVED_MASK) {
470 printk(KERN_INFO PFX "reserved bits set (%x) in mode 0x%x. Fixed.\n",
471 *requested_mode & AGP2_RESERVED_MASK, *requested_mode);
472 *requested_mode &= ~AGP2_RESERVED_MASK;
476 * Some dumb bridges are programmed to disobey the AGP2 spec.
477 * This is likely a BIOS misprogramming rather than poweron default, or
478 * it would be a lot more common.
479 * https://bugs.freedesktop.org/show_bug.cgi?id=8816
480 * AGPv2 spec 6.1.9 states:
481 * The RATE field indicates the data transfer rates supported by this
482 * device. A.G.P. devices must report all that apply.
483 * Fix them up as best we can.
485 switch (*bridge_agpstat & 7) {
486 case 4:
487 *bridge_agpstat |= (AGPSTAT2_2X | AGPSTAT2_1X);
488 printk(KERN_INFO PFX "BIOS bug. AGP bridge claims to only support x4 rate"
489 "Fixing up support for x2 & x1\n");
490 break;
491 case 2:
492 *bridge_agpstat |= AGPSTAT2_1X;
493 printk(KERN_INFO PFX "BIOS bug. AGP bridge claims to only support x2 rate"
494 "Fixing up support for x1\n");
495 break;
496 default:
497 break;
500 /* Check the speed bits make sense. Only one should be set. */
501 tmp = *requested_mode & 7;
502 switch (tmp) {
503 case 0:
504 printk(KERN_INFO PFX "%s tried to set rate=x0. Setting to x1 mode.\n", current->comm);
505 *requested_mode |= AGPSTAT2_1X;
506 break;
507 case 1:
508 case 2:
509 break;
510 case 3:
511 *requested_mode &= ~(AGPSTAT2_1X); /* rate=2 */
512 break;
513 case 4:
514 break;
515 case 5:
516 case 6:
517 case 7:
518 *requested_mode &= ~(AGPSTAT2_1X|AGPSTAT2_2X); /* rate=4*/
519 break;
522 /* disable SBA if it's not supported */
523 if (!((*bridge_agpstat & AGPSTAT_SBA) && (*vga_agpstat & AGPSTAT_SBA) && (*requested_mode & AGPSTAT_SBA)))
524 *bridge_agpstat &= ~AGPSTAT_SBA;
526 /* Set rate */
527 if (!((*bridge_agpstat & AGPSTAT2_4X) && (*vga_agpstat & AGPSTAT2_4X) && (*requested_mode & AGPSTAT2_4X)))
528 *bridge_agpstat &= ~AGPSTAT2_4X;
530 if (!((*bridge_agpstat & AGPSTAT2_2X) && (*vga_agpstat & AGPSTAT2_2X) && (*requested_mode & AGPSTAT2_2X)))
531 *bridge_agpstat &= ~AGPSTAT2_2X;
533 if (!((*bridge_agpstat & AGPSTAT2_1X) && (*vga_agpstat & AGPSTAT2_1X) && (*requested_mode & AGPSTAT2_1X)))
534 *bridge_agpstat &= ~AGPSTAT2_1X;
536 /* Now we know what mode it should be, clear out the unwanted bits. */
537 if (*bridge_agpstat & AGPSTAT2_4X)
538 *bridge_agpstat &= ~(AGPSTAT2_1X | AGPSTAT2_2X); /* 4X */
540 if (*bridge_agpstat & AGPSTAT2_2X)
541 *bridge_agpstat &= ~(AGPSTAT2_1X | AGPSTAT2_4X); /* 2X */
543 if (*bridge_agpstat & AGPSTAT2_1X)
544 *bridge_agpstat &= ~(AGPSTAT2_2X | AGPSTAT2_4X); /* 1X */
546 /* Apply any errata. */
547 if (agp_bridge->flags & AGP_ERRATA_FASTWRITES)
548 *bridge_agpstat &= ~AGPSTAT_FW;
550 if (agp_bridge->flags & AGP_ERRATA_SBA)
551 *bridge_agpstat &= ~AGPSTAT_SBA;
553 if (agp_bridge->flags & AGP_ERRATA_1X) {
554 *bridge_agpstat &= ~(AGPSTAT2_2X | AGPSTAT2_4X);
555 *bridge_agpstat |= AGPSTAT2_1X;
558 /* If we've dropped down to 1X, disable fast writes. */
559 if (*bridge_agpstat & AGPSTAT2_1X)
560 *bridge_agpstat &= ~AGPSTAT_FW;
564 * requested_mode = Mode requested by (typically) X.
565 * bridge_agpstat = PCI_AGP_STATUS from agp bridge.
566 * vga_agpstat = PCI_AGP_STATUS from graphic card.
568 static void agp_v3_parse_one(u32 *requested_mode, u32 *bridge_agpstat, u32 *vga_agpstat)
570 u32 origbridge=*bridge_agpstat, origvga=*vga_agpstat;
571 u32 tmp;
573 if (*requested_mode & AGP3_RESERVED_MASK) {
574 printk(KERN_INFO PFX "reserved bits set (%x) in mode 0x%x. Fixed.\n",
575 *requested_mode & AGP3_RESERVED_MASK, *requested_mode);
576 *requested_mode &= ~AGP3_RESERVED_MASK;
579 /* Check the speed bits make sense. */
580 tmp = *requested_mode & 7;
581 if (tmp == 0) {
582 printk(KERN_INFO PFX "%s tried to set rate=x0. Setting to AGP3 x4 mode.\n", current->comm);
583 *requested_mode |= AGPSTAT3_4X;
585 if (tmp >= 3) {
586 printk(KERN_INFO PFX "%s tried to set rate=x%d. Setting to AGP3 x8 mode.\n", current->comm, tmp * 4);
587 *requested_mode = (*requested_mode & ~7) | AGPSTAT3_8X;
590 /* ARQSZ - Set the value to the maximum one.
591 * Don't allow the mode register to override values. */
592 *bridge_agpstat = ((*bridge_agpstat & ~AGPSTAT_ARQSZ) |
593 max_t(u32,(*bridge_agpstat & AGPSTAT_ARQSZ),(*vga_agpstat & AGPSTAT_ARQSZ)));
595 /* Calibration cycle.
596 * Don't allow the mode register to override values. */
597 *bridge_agpstat = ((*bridge_agpstat & ~AGPSTAT_CAL_MASK) |
598 min_t(u32,(*bridge_agpstat & AGPSTAT_CAL_MASK),(*vga_agpstat & AGPSTAT_CAL_MASK)));
600 /* SBA *must* be supported for AGP v3 */
601 *bridge_agpstat |= AGPSTAT_SBA;
604 * Set speed.
605 * Check for invalid speeds. This can happen when applications
606 * written before the AGP 3.0 standard pass AGP2.x modes to AGP3 hardware
608 if (*requested_mode & AGPSTAT_MODE_3_0) {
610 * Caller hasn't a clue what it is doing. Bridge is in 3.0 mode,
611 * have been passed a 3.0 mode, but with 2.x speed bits set.
612 * AGP2.x 4x -> AGP3.0 4x.
614 if (*requested_mode & AGPSTAT2_4X) {
615 printk(KERN_INFO PFX "%s passes broken AGP3 flags (%x). Fixed.\n",
616 current->comm, *requested_mode);
617 *requested_mode &= ~AGPSTAT2_4X;
618 *requested_mode |= AGPSTAT3_4X;
620 } else {
622 * The caller doesn't know what they are doing. We are in 3.0 mode,
623 * but have been passed an AGP 2.x mode.
624 * Convert AGP 1x,2x,4x -> AGP 3.0 4x.
626 printk(KERN_INFO PFX "%s passes broken AGP2 flags (%x) in AGP3 mode. Fixed.\n",
627 current->comm, *requested_mode);
628 *requested_mode &= ~(AGPSTAT2_4X | AGPSTAT2_2X | AGPSTAT2_1X);
629 *requested_mode |= AGPSTAT3_4X;
632 if (*requested_mode & AGPSTAT3_8X) {
633 if (!(*bridge_agpstat & AGPSTAT3_8X)) {
634 *bridge_agpstat &= ~(AGPSTAT3_8X | AGPSTAT3_RSVD);
635 *bridge_agpstat |= AGPSTAT3_4X;
636 printk(KERN_INFO PFX "%s requested AGPx8 but bridge not capable.\n", current->comm);
637 return;
639 if (!(*vga_agpstat & AGPSTAT3_8X)) {
640 *bridge_agpstat &= ~(AGPSTAT3_8X | AGPSTAT3_RSVD);
641 *bridge_agpstat |= AGPSTAT3_4X;
642 printk(KERN_INFO PFX "%s requested AGPx8 but graphic card not capable.\n", current->comm);
643 return;
645 /* All set, bridge & device can do AGP x8*/
646 *bridge_agpstat &= ~(AGPSTAT3_4X | AGPSTAT3_RSVD);
647 goto done;
649 } else if (*requested_mode & AGPSTAT3_4X) {
650 *bridge_agpstat &= ~(AGPSTAT3_8X | AGPSTAT3_RSVD);
651 *bridge_agpstat |= AGPSTAT3_4X;
652 goto done;
654 } else {
657 * If we didn't specify an AGP mode, we see if both
658 * the graphics card, and the bridge can do x8, and use if so.
659 * If not, we fall back to x4 mode.
661 if ((*bridge_agpstat & AGPSTAT3_8X) && (*vga_agpstat & AGPSTAT3_8X)) {
662 printk(KERN_INFO PFX "No AGP mode specified. Setting to highest mode "
663 "supported by bridge & card (x8).\n");
664 *bridge_agpstat &= ~(AGPSTAT3_4X | AGPSTAT3_RSVD);
665 *vga_agpstat &= ~(AGPSTAT3_4X | AGPSTAT3_RSVD);
666 } else {
667 printk(KERN_INFO PFX "Fell back to AGPx4 mode because");
668 if (!(*bridge_agpstat & AGPSTAT3_8X)) {
669 printk(KERN_INFO PFX "bridge couldn't do x8. bridge_agpstat:%x (orig=%x)\n",
670 *bridge_agpstat, origbridge);
671 *bridge_agpstat &= ~(AGPSTAT3_8X | AGPSTAT3_RSVD);
672 *bridge_agpstat |= AGPSTAT3_4X;
674 if (!(*vga_agpstat & AGPSTAT3_8X)) {
675 printk(KERN_INFO PFX "graphics card couldn't do x8. vga_agpstat:%x (orig=%x)\n",
676 *vga_agpstat, origvga);
677 *vga_agpstat &= ~(AGPSTAT3_8X | AGPSTAT3_RSVD);
678 *vga_agpstat |= AGPSTAT3_4X;
683 done:
684 /* Apply any errata. */
685 if (agp_bridge->flags & AGP_ERRATA_FASTWRITES)
686 *bridge_agpstat &= ~AGPSTAT_FW;
688 if (agp_bridge->flags & AGP_ERRATA_SBA)
689 *bridge_agpstat &= ~AGPSTAT_SBA;
691 if (agp_bridge->flags & AGP_ERRATA_1X) {
692 *bridge_agpstat &= ~(AGPSTAT2_2X | AGPSTAT2_4X);
693 *bridge_agpstat |= AGPSTAT2_1X;
699 * agp_collect_device_status - determine correct agp_cmd from various agp_stat's
700 * @bridge: an agp_bridge_data struct allocated for the AGP host bridge.
701 * @requested_mode: requested agp_stat from userspace (Typically from X)
702 * @bridge_agpstat: current agp_stat from AGP bridge.
704 * This function will hunt for an AGP graphics card, and try to match
705 * the requested mode to the capabilities of both the bridge and the card.
707 u32 agp_collect_device_status(struct agp_bridge_data *bridge, u32 requested_mode, u32 bridge_agpstat)
709 struct pci_dev *device = NULL;
710 u32 vga_agpstat;
711 u8 cap_ptr;
713 for (;;) {
714 device = pci_get_class(PCI_CLASS_DISPLAY_VGA << 8, device);
715 if (!device) {
716 printk(KERN_INFO PFX "Couldn't find an AGP VGA controller.\n");
717 return 0;
719 cap_ptr = pci_find_capability(device, PCI_CAP_ID_AGP);
720 if (cap_ptr)
721 break;
725 * Ok, here we have a AGP device. Disable impossible
726 * settings, and adjust the readqueue to the minimum.
728 pci_read_config_dword(device, cap_ptr+PCI_AGP_STATUS, &vga_agpstat);
730 /* adjust RQ depth */
731 bridge_agpstat = ((bridge_agpstat & ~AGPSTAT_RQ_DEPTH) |
732 min_t(u32, (requested_mode & AGPSTAT_RQ_DEPTH),
733 min_t(u32, (bridge_agpstat & AGPSTAT_RQ_DEPTH), (vga_agpstat & AGPSTAT_RQ_DEPTH))));
735 /* disable FW if it's not supported */
736 if (!((bridge_agpstat & AGPSTAT_FW) &&
737 (vga_agpstat & AGPSTAT_FW) &&
738 (requested_mode & AGPSTAT_FW)))
739 bridge_agpstat &= ~AGPSTAT_FW;
741 /* Check to see if we are operating in 3.0 mode */
742 if (agp_bridge->mode & AGPSTAT_MODE_3_0)
743 agp_v3_parse_one(&requested_mode, &bridge_agpstat, &vga_agpstat);
744 else
745 agp_v2_parse_one(&requested_mode, &bridge_agpstat, &vga_agpstat);
747 pci_dev_put(device);
748 return bridge_agpstat;
750 EXPORT_SYMBOL(agp_collect_device_status);
753 void agp_device_command(u32 bridge_agpstat, int agp_v3)
755 struct pci_dev *device = NULL;
756 int mode;
758 mode = bridge_agpstat & 0x7;
759 if (agp_v3)
760 mode *= 4;
762 for_each_pci_dev(device) {
763 u8 agp = pci_find_capability(device, PCI_CAP_ID_AGP);
764 if (!agp)
765 continue;
767 printk(KERN_INFO PFX "Putting AGP V%d device at %s into %dx mode\n",
768 agp_v3 ? 3 : 2, pci_name(device), mode);
769 pci_write_config_dword(device, agp + PCI_AGP_COMMAND, bridge_agpstat);
772 EXPORT_SYMBOL(agp_device_command);
775 void get_agp_version(struct agp_bridge_data *bridge)
777 u32 ncapid;
779 /* Exit early if already set by errata workarounds. */
780 if (bridge->major_version != 0)
781 return;
783 pci_read_config_dword(bridge->dev, bridge->capndx, &ncapid);
784 bridge->major_version = (ncapid >> AGP_MAJOR_VERSION_SHIFT) & 0xf;
785 bridge->minor_version = (ncapid >> AGP_MINOR_VERSION_SHIFT) & 0xf;
787 EXPORT_SYMBOL(get_agp_version);
790 void agp_generic_enable(struct agp_bridge_data *bridge, u32 requested_mode)
792 u32 bridge_agpstat, temp;
794 get_agp_version(agp_bridge);
796 printk(KERN_INFO PFX "Found an AGP %d.%d compliant device at %s.\n",
797 agp_bridge->major_version,
798 agp_bridge->minor_version,
799 pci_name(agp_bridge->dev));
801 pci_read_config_dword(agp_bridge->dev,
802 agp_bridge->capndx + PCI_AGP_STATUS, &bridge_agpstat);
804 bridge_agpstat = agp_collect_device_status(agp_bridge, requested_mode, bridge_agpstat);
805 if (bridge_agpstat == 0)
806 /* Something bad happened. FIXME: Return error code? */
807 return;
809 bridge_agpstat |= AGPSTAT_AGP_ENABLE;
811 /* Do AGP version specific frobbing. */
812 if (bridge->major_version >= 3) {
813 if (bridge->mode & AGPSTAT_MODE_3_0) {
814 /* If we have 3.5, we can do the isoch stuff. */
815 if (bridge->minor_version >= 5)
816 agp_3_5_enable(bridge);
817 agp_device_command(bridge_agpstat, TRUE);
818 return;
819 } else {
820 /* Disable calibration cycle in RX91<1> when not in AGP3.0 mode of operation.*/
821 bridge_agpstat &= ~(7<<10) ;
822 pci_read_config_dword(bridge->dev,
823 bridge->capndx+AGPCTRL, &temp);
824 temp |= (1<<9);
825 pci_write_config_dword(bridge->dev,
826 bridge->capndx+AGPCTRL, temp);
828 printk(KERN_INFO PFX "Device is in legacy mode,"
829 " falling back to 2.x\n");
833 /* AGP v<3 */
834 agp_device_command(bridge_agpstat, FALSE);
836 EXPORT_SYMBOL(agp_generic_enable);
839 int agp_generic_create_gatt_table(struct agp_bridge_data *bridge)
841 char *table;
842 char *table_end;
843 int size;
844 int page_order;
845 int num_entries;
846 int i;
847 void *temp;
848 struct page *page;
850 /* The generic routines can't handle 2 level gatt's */
851 if (bridge->driver->size_type == LVL2_APER_SIZE)
852 return -EINVAL;
854 table = NULL;
855 i = bridge->aperture_size_idx;
856 temp = bridge->current_size;
857 size = page_order = num_entries = 0;
859 if (bridge->driver->size_type != FIXED_APER_SIZE) {
860 do {
861 switch (bridge->driver->size_type) {
862 case U8_APER_SIZE:
863 size = A_SIZE_8(temp)->size;
864 page_order =
865 A_SIZE_8(temp)->page_order;
866 num_entries =
867 A_SIZE_8(temp)->num_entries;
868 break;
869 case U16_APER_SIZE:
870 size = A_SIZE_16(temp)->size;
871 page_order = A_SIZE_16(temp)->page_order;
872 num_entries = A_SIZE_16(temp)->num_entries;
873 break;
874 case U32_APER_SIZE:
875 size = A_SIZE_32(temp)->size;
876 page_order = A_SIZE_32(temp)->page_order;
877 num_entries = A_SIZE_32(temp)->num_entries;
878 break;
879 /* This case will never really happen. */
880 case FIXED_APER_SIZE:
881 case LVL2_APER_SIZE:
882 default:
883 size = page_order = num_entries = 0;
884 break;
887 table = alloc_gatt_pages(page_order);
889 if (table == NULL) {
890 i++;
891 switch (bridge->driver->size_type) {
892 case U8_APER_SIZE:
893 bridge->current_size = A_IDX8(bridge);
894 break;
895 case U16_APER_SIZE:
896 bridge->current_size = A_IDX16(bridge);
897 break;
898 case U32_APER_SIZE:
899 bridge->current_size = A_IDX32(bridge);
900 break;
901 /* These cases will never really happen. */
902 case FIXED_APER_SIZE:
903 case LVL2_APER_SIZE:
904 default:
905 break;
907 temp = bridge->current_size;
908 } else {
909 bridge->aperture_size_idx = i;
911 } while (!table && (i < bridge->driver->num_aperture_sizes));
912 } else {
913 size = ((struct aper_size_info_fixed *) temp)->size;
914 page_order = ((struct aper_size_info_fixed *) temp)->page_order;
915 num_entries = ((struct aper_size_info_fixed *) temp)->num_entries;
916 table = alloc_gatt_pages(page_order);
919 if (table == NULL)
920 return -ENOMEM;
922 table_end = table + ((PAGE_SIZE * (1 << page_order)) - 1);
924 for (page = virt_to_page(table); page <= virt_to_page(table_end); page++)
925 SetPageReserved(page);
927 bridge->gatt_table_real = (u32 *) table;
928 agp_gatt_table = (void *)table;
930 bridge->driver->cache_flush();
931 bridge->gatt_table = ioremap_nocache(virt_to_gart(table),
932 (PAGE_SIZE * (1 << page_order)));
933 bridge->driver->cache_flush();
935 if (bridge->gatt_table == NULL) {
936 for (page = virt_to_page(table); page <= virt_to_page(table_end); page++)
937 ClearPageReserved(page);
939 free_gatt_pages(table, page_order);
941 return -ENOMEM;
943 bridge->gatt_bus_addr = virt_to_gart(bridge->gatt_table_real);
945 /* AK: bogus, should encode addresses > 4GB */
946 for (i = 0; i < num_entries; i++) {
947 writel(bridge->scratch_page, bridge->gatt_table+i);
948 readl(bridge->gatt_table+i); /* PCI Posting. */
951 return 0;
953 EXPORT_SYMBOL(agp_generic_create_gatt_table);
955 int agp_generic_free_gatt_table(struct agp_bridge_data *bridge)
957 int page_order;
958 char *table, *table_end;
959 void *temp;
960 struct page *page;
962 temp = bridge->current_size;
964 switch (bridge->driver->size_type) {
965 case U8_APER_SIZE:
966 page_order = A_SIZE_8(temp)->page_order;
967 break;
968 case U16_APER_SIZE:
969 page_order = A_SIZE_16(temp)->page_order;
970 break;
971 case U32_APER_SIZE:
972 page_order = A_SIZE_32(temp)->page_order;
973 break;
974 case FIXED_APER_SIZE:
975 page_order = A_SIZE_FIX(temp)->page_order;
976 break;
977 case LVL2_APER_SIZE:
978 /* The generic routines can't deal with 2 level gatt's */
979 return -EINVAL;
980 break;
981 default:
982 page_order = 0;
983 break;
986 /* Do not worry about freeing memory, because if this is
987 * called, then all agp memory is deallocated and removed
988 * from the table. */
990 iounmap(bridge->gatt_table);
991 table = (char *) bridge->gatt_table_real;
992 table_end = table + ((PAGE_SIZE * (1 << page_order)) - 1);
994 for (page = virt_to_page(table); page <= virt_to_page(table_end); page++)
995 ClearPageReserved(page);
997 free_gatt_pages(bridge->gatt_table_real, page_order);
999 agp_gatt_table = NULL;
1000 bridge->gatt_table = NULL;
1001 bridge->gatt_table_real = NULL;
1002 bridge->gatt_bus_addr = 0;
1004 return 0;
1006 EXPORT_SYMBOL(agp_generic_free_gatt_table);
1009 int agp_generic_insert_memory(struct agp_memory * mem, off_t pg_start, int type)
1011 int num_entries;
1012 size_t i;
1013 off_t j;
1014 void *temp;
1015 struct agp_bridge_data *bridge;
1016 int mask_type;
1018 bridge = mem->bridge;
1019 if (!bridge)
1020 return -EINVAL;
1022 if (mem->page_count == 0)
1023 return 0;
1025 temp = bridge->current_size;
1027 switch (bridge->driver->size_type) {
1028 case U8_APER_SIZE:
1029 num_entries = A_SIZE_8(temp)->num_entries;
1030 break;
1031 case U16_APER_SIZE:
1032 num_entries = A_SIZE_16(temp)->num_entries;
1033 break;
1034 case U32_APER_SIZE:
1035 num_entries = A_SIZE_32(temp)->num_entries;
1036 break;
1037 case FIXED_APER_SIZE:
1038 num_entries = A_SIZE_FIX(temp)->num_entries;
1039 break;
1040 case LVL2_APER_SIZE:
1041 /* The generic routines can't deal with 2 level gatt's */
1042 return -EINVAL;
1043 break;
1044 default:
1045 num_entries = 0;
1046 break;
1049 num_entries -= agp_memory_reserved/PAGE_SIZE;
1050 if (num_entries < 0) num_entries = 0;
1052 if (type != mem->type)
1053 return -EINVAL;
1055 mask_type = bridge->driver->agp_type_to_mask_type(bridge, type);
1056 if (mask_type != 0) {
1057 /* The generic routines know nothing of memory types */
1058 return -EINVAL;
1061 /* AK: could wrap */
1062 if ((pg_start + mem->page_count) > num_entries)
1063 return -EINVAL;
1065 j = pg_start;
1067 while (j < (pg_start + mem->page_count)) {
1068 if (!PGE_EMPTY(bridge, readl(bridge->gatt_table+j)))
1069 return -EBUSY;
1070 j++;
1073 if (mem->is_flushed == FALSE) {
1074 bridge->driver->cache_flush();
1075 mem->is_flushed = TRUE;
1078 for (i = 0, j = pg_start; i < mem->page_count; i++, j++) {
1079 writel(bridge->driver->mask_memory(bridge, mem->memory[i], mask_type),
1080 bridge->gatt_table+j);
1082 readl(bridge->gatt_table+j-1); /* PCI Posting. */
1084 bridge->driver->tlb_flush(mem);
1085 return 0;
1087 EXPORT_SYMBOL(agp_generic_insert_memory);
1090 int agp_generic_remove_memory(struct agp_memory *mem, off_t pg_start, int type)
1092 size_t i;
1093 struct agp_bridge_data *bridge;
1094 int mask_type;
1096 bridge = mem->bridge;
1097 if (!bridge)
1098 return -EINVAL;
1100 if (mem->page_count == 0)
1101 return 0;
1103 if (type != mem->type)
1104 return -EINVAL;
1106 mask_type = bridge->driver->agp_type_to_mask_type(bridge, type);
1107 if (mask_type != 0) {
1108 /* The generic routines know nothing of memory types */
1109 return -EINVAL;
1112 /* AK: bogus, should encode addresses > 4GB */
1113 for (i = pg_start; i < (mem->page_count + pg_start); i++) {
1114 writel(bridge->scratch_page, bridge->gatt_table+i);
1116 readl(bridge->gatt_table+i-1); /* PCI Posting. */
1118 bridge->driver->tlb_flush(mem);
1119 return 0;
1121 EXPORT_SYMBOL(agp_generic_remove_memory);
1123 struct agp_memory *agp_generic_alloc_by_type(size_t page_count, int type)
1125 return NULL;
1127 EXPORT_SYMBOL(agp_generic_alloc_by_type);
1129 void agp_generic_free_by_type(struct agp_memory *curr)
1131 agp_free_page_array(curr);
1132 agp_free_key(curr->key);
1133 kfree(curr);
1135 EXPORT_SYMBOL(agp_generic_free_by_type);
1137 struct agp_memory *agp_generic_alloc_user(size_t page_count, int type)
1139 struct agp_memory *new;
1140 int i;
1141 int pages;
1143 pages = (page_count + ENTRIES_PER_PAGE - 1) / ENTRIES_PER_PAGE;
1144 new = agp_create_user_memory(page_count);
1145 if (new == NULL)
1146 return NULL;
1148 for (i = 0; i < page_count; i++)
1149 new->memory[i] = 0;
1150 new->page_count = 0;
1151 new->type = type;
1152 new->num_scratch_pages = pages;
1154 return new;
1156 EXPORT_SYMBOL(agp_generic_alloc_user);
1159 * Basic Page Allocation Routines -
1160 * These routines handle page allocation and by default they reserve the allocated
1161 * memory. They also handle incrementing the current_memory_agp value, Which is checked
1162 * against a maximum value.
1165 void *agp_generic_alloc_page(struct agp_bridge_data *bridge)
1167 struct page * page;
1169 page = alloc_page(GFP_KERNEL | GFP_DMA32);
1170 if (page == NULL)
1171 return NULL;
1173 map_page_into_agp(page);
1175 get_page(page);
1176 atomic_inc(&agp_bridge->current_memory_agp);
1177 return page_address(page);
1179 EXPORT_SYMBOL(agp_generic_alloc_page);
1182 void agp_generic_destroy_page(void *addr, int flags)
1184 struct page *page;
1186 if (addr == NULL)
1187 return;
1189 page = virt_to_page(addr);
1190 if (flags & AGP_PAGE_DESTROY_UNMAP)
1191 unmap_page_from_agp(page);
1193 if (flags & AGP_PAGE_DESTROY_FREE) {
1194 put_page(page);
1195 free_page((unsigned long)addr);
1196 atomic_dec(&agp_bridge->current_memory_agp);
1199 EXPORT_SYMBOL(agp_generic_destroy_page);
1201 /* End Basic Page Allocation Routines */
1205 * agp_enable - initialise the agp point-to-point connection.
1207 * @mode: agp mode register value to configure with.
1209 void agp_enable(struct agp_bridge_data *bridge, u32 mode)
1211 if (!bridge)
1212 return;
1213 bridge->driver->agp_enable(bridge, mode);
1215 EXPORT_SYMBOL(agp_enable);
1217 /* When we remove the global variable agp_bridge from all drivers
1218 * then agp_alloc_bridge and agp_generic_find_bridge need to be updated
1221 struct agp_bridge_data *agp_generic_find_bridge(struct pci_dev *pdev)
1223 if (list_empty(&agp_bridges))
1224 return NULL;
1226 return agp_bridge;
1229 static void ipi_handler(void *null)
1231 flush_agp_cache();
1234 void global_cache_flush(void)
1236 if (on_each_cpu(ipi_handler, NULL, 1, 1) != 0)
1237 panic(PFX "timed out waiting for the other CPUs!\n");
1239 EXPORT_SYMBOL(global_cache_flush);
1241 unsigned long agp_generic_mask_memory(struct agp_bridge_data *bridge,
1242 unsigned long addr, int type)
1244 /* memory type is ignored in the generic routine */
1245 if (bridge->driver->masks)
1246 return addr | bridge->driver->masks[0].mask;
1247 else
1248 return addr;
1250 EXPORT_SYMBOL(agp_generic_mask_memory);
1252 int agp_generic_type_to_mask_type(struct agp_bridge_data *bridge,
1253 int type)
1255 if (type >= AGP_USER_TYPES)
1256 return 0;
1257 return type;
1259 EXPORT_SYMBOL(agp_generic_type_to_mask_type);
1262 * These functions are implemented according to the AGPv3 spec,
1263 * which covers implementation details that had previously been
1264 * left open.
1267 int agp3_generic_fetch_size(void)
1269 u16 temp_size;
1270 int i;
1271 struct aper_size_info_16 *values;
1273 pci_read_config_word(agp_bridge->dev, agp_bridge->capndx+AGPAPSIZE, &temp_size);
1274 values = A_SIZE_16(agp_bridge->driver->aperture_sizes);
1276 for (i = 0; i < agp_bridge->driver->num_aperture_sizes; i++) {
1277 if (temp_size == values[i].size_value) {
1278 agp_bridge->previous_size =
1279 agp_bridge->current_size = (void *) (values + i);
1281 agp_bridge->aperture_size_idx = i;
1282 return values[i].size;
1285 return 0;
1287 EXPORT_SYMBOL(agp3_generic_fetch_size);
1289 void agp3_generic_tlbflush(struct agp_memory *mem)
1291 u32 ctrl;
1292 pci_read_config_dword(agp_bridge->dev, agp_bridge->capndx+AGPCTRL, &ctrl);
1293 pci_write_config_dword(agp_bridge->dev, agp_bridge->capndx+AGPCTRL, ctrl & ~AGPCTRL_GTLBEN);
1294 pci_write_config_dword(agp_bridge->dev, agp_bridge->capndx+AGPCTRL, ctrl);
1296 EXPORT_SYMBOL(agp3_generic_tlbflush);
1298 int agp3_generic_configure(void)
1300 u32 temp;
1301 struct aper_size_info_16 *current_size;
1303 current_size = A_SIZE_16(agp_bridge->current_size);
1305 pci_read_config_dword(agp_bridge->dev, AGP_APBASE, &temp);
1306 agp_bridge->gart_bus_addr = (temp & PCI_BASE_ADDRESS_MEM_MASK);
1308 /* set aperture size */
1309 pci_write_config_word(agp_bridge->dev, agp_bridge->capndx+AGPAPSIZE, current_size->size_value);
1310 /* set gart pointer */
1311 pci_write_config_dword(agp_bridge->dev, agp_bridge->capndx+AGPGARTLO, agp_bridge->gatt_bus_addr);
1312 /* enable aperture and GTLB */
1313 pci_read_config_dword(agp_bridge->dev, agp_bridge->capndx+AGPCTRL, &temp);
1314 pci_write_config_dword(agp_bridge->dev, agp_bridge->capndx+AGPCTRL, temp | AGPCTRL_APERENB | AGPCTRL_GTLBEN);
1315 return 0;
1317 EXPORT_SYMBOL(agp3_generic_configure);
1319 void agp3_generic_cleanup(void)
1321 u32 ctrl;
1322 pci_read_config_dword(agp_bridge->dev, agp_bridge->capndx+AGPCTRL, &ctrl);
1323 pci_write_config_dword(agp_bridge->dev, agp_bridge->capndx+AGPCTRL, ctrl & ~AGPCTRL_APERENB);
1325 EXPORT_SYMBOL(agp3_generic_cleanup);
1327 const struct aper_size_info_16 agp3_generic_sizes[AGP_GENERIC_SIZES_ENTRIES] =
1329 {4096, 1048576, 10,0x000},
1330 {2048, 524288, 9, 0x800},
1331 {1024, 262144, 8, 0xc00},
1332 { 512, 131072, 7, 0xe00},
1333 { 256, 65536, 6, 0xf00},
1334 { 128, 32768, 5, 0xf20},
1335 { 64, 16384, 4, 0xf30},
1336 { 32, 8192, 3, 0xf38},
1337 { 16, 4096, 2, 0xf3c},
1338 { 8, 2048, 1, 0xf3e},
1339 { 4, 1024, 0, 0xf3f}
1341 EXPORT_SYMBOL(agp3_generic_sizes);