x86: cpa: move clflush_cache_range()
[wrt350n-kernel.git] / drivers / char / dtlk.c
blobabde6ddefe696e7e0af352e918085c68a83f4d89
1 /* -*- linux-c -*-
2 * dtlk.c - DoubleTalk PC driver for Linux
4 * Original author: Chris Pallotta <chris@allmedia.com>
5 * Current maintainer: Jim Van Zandt <jrv@vanzandt.mv.com>
6 *
7 * 2000-03-18 Jim Van Zandt: Fix polling.
8 * Eliminate dtlk_timer_active flag and separate dtlk_stop_timer
9 * function. Don't restart timer in dtlk_timer_tick. Restart timer
10 * in dtlk_poll after every poll. dtlk_poll returns mask (duh).
11 * Eliminate unused function dtlk_write_byte. Misc. code cleanups.
14 /* This driver is for the DoubleTalk PC, a speech synthesizer
15 manufactured by RC Systems (http://www.rcsys.com/). It was written
16 based on documentation in their User's Manual file and Developer's
17 Tools disk.
19 The DoubleTalk PC contains four voice synthesizers: text-to-speech
20 (TTS), linear predictive coding (LPC), PCM/ADPCM, and CVSD. It
21 also has a tone generator. Output data for LPC are written to the
22 LPC port, and output data for the other modes are written to the
23 TTS port.
25 Two kinds of data can be read from the DoubleTalk: status
26 information (in response to the "\001?" interrogation command) is
27 read from the TTS port, and index markers (which mark the progress
28 of the speech) are read from the LPC port. Not all models of the
29 DoubleTalk PC implement index markers. Both the TTS and LPC ports
30 can also display status flags.
32 The DoubleTalk PC generates no interrupts.
34 These characteristics are mapped into the Unix stream I/O model as
35 follows:
37 "write" sends bytes to the TTS port. It is the responsibility of
38 the user program to switch modes among TTS, PCM/ADPCM, and CVSD.
39 This driver was written for use with the text-to-speech
40 synthesizer. If LPC output is needed some day, other minor device
41 numbers can be used to select among output modes.
43 "read" gets index markers from the LPC port. If the device does
44 not implement index markers, the read will fail with error EINVAL.
46 Status information is available using the DTLK_INTERROGATE ioctl.
50 #include <linux/module.h>
52 #define KERNEL
53 #include <linux/types.h>
54 #include <linux/fs.h>
55 #include <linux/mm.h>
56 #include <linux/errno.h> /* for -EBUSY */
57 #include <linux/ioport.h> /* for request_region */
58 #include <linux/delay.h> /* for loops_per_jiffy */
59 #include <asm/io.h> /* for inb_p, outb_p, inb, outb, etc. */
60 #include <asm/uaccess.h> /* for get_user, etc. */
61 #include <linux/wait.h> /* for wait_queue */
62 #include <linux/init.h> /* for __init, module_{init,exit} */
63 #include <linux/poll.h> /* for POLLIN, etc. */
64 #include <linux/dtlk.h> /* local header file for DoubleTalk values */
66 #ifdef TRACING
67 #define TRACE_TEXT(str) printk(str);
68 #define TRACE_RET printk(")")
69 #else /* !TRACING */
70 #define TRACE_TEXT(str) ((void) 0)
71 #define TRACE_RET ((void) 0)
72 #endif /* TRACING */
74 static void dtlk_timer_tick(unsigned long data);
76 static int dtlk_major;
77 static int dtlk_port_lpc;
78 static int dtlk_port_tts;
79 static int dtlk_busy;
80 static int dtlk_has_indexing;
81 static unsigned int dtlk_portlist[] =
82 {0x25e, 0x29e, 0x2de, 0x31e, 0x35e, 0x39e, 0};
83 static wait_queue_head_t dtlk_process_list;
84 static DEFINE_TIMER(dtlk_timer, dtlk_timer_tick, 0, 0);
86 /* prototypes for file_operations struct */
87 static ssize_t dtlk_read(struct file *, char __user *,
88 size_t nbytes, loff_t * ppos);
89 static ssize_t dtlk_write(struct file *, const char __user *,
90 size_t nbytes, loff_t * ppos);
91 static unsigned int dtlk_poll(struct file *, poll_table *);
92 static int dtlk_open(struct inode *, struct file *);
93 static int dtlk_release(struct inode *, struct file *);
94 static int dtlk_ioctl(struct inode *inode, struct file *file,
95 unsigned int cmd, unsigned long arg);
97 static const struct file_operations dtlk_fops =
99 .owner = THIS_MODULE,
100 .read = dtlk_read,
101 .write = dtlk_write,
102 .poll = dtlk_poll,
103 .ioctl = dtlk_ioctl,
104 .open = dtlk_open,
105 .release = dtlk_release,
108 /* local prototypes */
109 static int dtlk_dev_probe(void);
110 static struct dtlk_settings *dtlk_interrogate(void);
111 static int dtlk_readable(void);
112 static char dtlk_read_lpc(void);
113 static char dtlk_read_tts(void);
114 static int dtlk_writeable(void);
115 static char dtlk_write_bytes(const char *buf, int n);
116 static char dtlk_write_tts(char);
118 static void dtlk_handle_error(char, char, unsigned int);
121 static ssize_t dtlk_read(struct file *file, char __user *buf,
122 size_t count, loff_t * ppos)
124 unsigned int minor = iminor(file->f_path.dentry->d_inode);
125 char ch;
126 int i = 0, retries;
128 TRACE_TEXT("(dtlk_read");
129 /* printk("DoubleTalk PC - dtlk_read()\n"); */
131 if (minor != DTLK_MINOR || !dtlk_has_indexing)
132 return -EINVAL;
134 for (retries = 0; retries < loops_per_jiffy; retries++) {
135 while (i < count && dtlk_readable()) {
136 ch = dtlk_read_lpc();
137 /* printk("dtlk_read() reads 0x%02x\n", ch); */
138 if (put_user(ch, buf++))
139 return -EFAULT;
140 i++;
142 if (i)
143 return i;
144 if (file->f_flags & O_NONBLOCK)
145 break;
146 msleep_interruptible(100);
148 if (retries == loops_per_jiffy)
149 printk(KERN_ERR "dtlk_read times out\n");
150 TRACE_RET;
151 return -EAGAIN;
154 static ssize_t dtlk_write(struct file *file, const char __user *buf,
155 size_t count, loff_t * ppos)
157 int i = 0, retries = 0, ch;
159 TRACE_TEXT("(dtlk_write");
160 #ifdef TRACING
161 printk(" \"");
163 int i, ch;
164 for (i = 0; i < count; i++) {
165 if (get_user(ch, buf + i))
166 return -EFAULT;
167 if (' ' <= ch && ch <= '~')
168 printk("%c", ch);
169 else
170 printk("\\%03o", ch);
172 printk("\"");
174 #endif
176 if (iminor(file->f_path.dentry->d_inode) != DTLK_MINOR)
177 return -EINVAL;
179 while (1) {
180 while (i < count && !get_user(ch, buf) &&
181 (ch == DTLK_CLEAR || dtlk_writeable())) {
182 dtlk_write_tts(ch);
183 buf++;
184 i++;
185 if (i % 5 == 0)
186 /* We yield our time until scheduled
187 again. This reduces the transfer
188 rate to 500 bytes/sec, but that's
189 still enough to keep up with the
190 speech synthesizer. */
191 msleep_interruptible(1);
192 else {
193 /* the RDY bit goes zero 2-3 usec
194 after writing, and goes 1 again
195 180-190 usec later. Here, we wait
196 up to 250 usec for the RDY bit to
197 go nonzero. */
198 for (retries = 0;
199 retries < loops_per_jiffy / (4000/HZ);
200 retries++)
201 if (inb_p(dtlk_port_tts) &
202 TTS_WRITABLE)
203 break;
205 retries = 0;
207 if (i == count)
208 return i;
209 if (file->f_flags & O_NONBLOCK)
210 break;
212 msleep_interruptible(1);
214 if (++retries > 10 * HZ) { /* wait no more than 10 sec
215 from last write */
216 printk("dtlk: write timeout. "
217 "inb_p(dtlk_port_tts) = 0x%02x\n",
218 inb_p(dtlk_port_tts));
219 TRACE_RET;
220 return -EBUSY;
223 TRACE_RET;
224 return -EAGAIN;
227 static unsigned int dtlk_poll(struct file *file, poll_table * wait)
229 int mask = 0;
230 unsigned long expires;
232 TRACE_TEXT(" dtlk_poll");
234 static long int j;
235 printk(".");
236 printk("<%ld>", jiffies-j);
237 j=jiffies;
239 poll_wait(file, &dtlk_process_list, wait);
241 if (dtlk_has_indexing && dtlk_readable()) {
242 del_timer(&dtlk_timer);
243 mask = POLLIN | POLLRDNORM;
245 if (dtlk_writeable()) {
246 del_timer(&dtlk_timer);
247 mask |= POLLOUT | POLLWRNORM;
249 /* there are no exception conditions */
251 /* There won't be any interrupts, so we set a timer instead. */
252 expires = jiffies + 3*HZ / 100;
253 mod_timer(&dtlk_timer, expires);
255 return mask;
258 static void dtlk_timer_tick(unsigned long data)
260 TRACE_TEXT(" dtlk_timer_tick");
261 wake_up_interruptible(&dtlk_process_list);
264 static int dtlk_ioctl(struct inode *inode,
265 struct file *file,
266 unsigned int cmd,
267 unsigned long arg)
269 char __user *argp = (char __user *)arg;
270 struct dtlk_settings *sp;
271 char portval;
272 TRACE_TEXT(" dtlk_ioctl");
274 switch (cmd) {
276 case DTLK_INTERROGATE:
277 sp = dtlk_interrogate();
278 if (copy_to_user(argp, sp, sizeof(struct dtlk_settings)))
279 return -EINVAL;
280 return 0;
282 case DTLK_STATUS:
283 portval = inb_p(dtlk_port_tts);
284 return put_user(portval, argp);
286 default:
287 return -EINVAL;
291 static int dtlk_open(struct inode *inode, struct file *file)
293 TRACE_TEXT("(dtlk_open");
295 nonseekable_open(inode, file);
296 switch (iminor(inode)) {
297 case DTLK_MINOR:
298 if (dtlk_busy)
299 return -EBUSY;
300 return nonseekable_open(inode, file);
302 default:
303 return -ENXIO;
307 static int dtlk_release(struct inode *inode, struct file *file)
309 TRACE_TEXT("(dtlk_release");
311 switch (iminor(inode)) {
312 case DTLK_MINOR:
313 break;
315 default:
316 break;
318 TRACE_RET;
320 del_timer_sync(&dtlk_timer);
322 return 0;
325 static int __init dtlk_init(void)
327 int err;
329 dtlk_port_lpc = 0;
330 dtlk_port_tts = 0;
331 dtlk_busy = 0;
332 dtlk_major = register_chrdev(0, "dtlk", &dtlk_fops);
333 if (dtlk_major < 0) {
334 printk(KERN_ERR "DoubleTalk PC - cannot register device\n");
335 return dtlk_major;
337 err = dtlk_dev_probe();
338 if (err) {
339 unregister_chrdev(dtlk_major, "dtlk");
340 return err;
342 printk(", MAJOR %d\n", dtlk_major);
344 init_waitqueue_head(&dtlk_process_list);
346 return 0;
349 static void __exit dtlk_cleanup (void)
351 dtlk_write_bytes("goodbye", 8);
352 msleep_interruptible(500); /* nap 0.50 sec but
353 could be awakened
354 earlier by
355 signals... */
357 dtlk_write_tts(DTLK_CLEAR);
358 unregister_chrdev(dtlk_major, "dtlk");
359 release_region(dtlk_port_lpc, DTLK_IO_EXTENT);
362 module_init(dtlk_init);
363 module_exit(dtlk_cleanup);
365 /* ------------------------------------------------------------------------ */
367 static int dtlk_readable(void)
369 #ifdef TRACING
370 printk(" dtlk_readable=%u@%u", inb_p(dtlk_port_lpc) != 0x7f, jiffies);
371 #endif
372 return inb_p(dtlk_port_lpc) != 0x7f;
375 static int dtlk_writeable(void)
377 /* TRACE_TEXT(" dtlk_writeable"); */
378 #ifdef TRACINGMORE
379 printk(" dtlk_writeable=%u", (inb_p(dtlk_port_tts) & TTS_WRITABLE)!=0);
380 #endif
381 return inb_p(dtlk_port_tts) & TTS_WRITABLE;
384 static int __init dtlk_dev_probe(void)
386 unsigned int testval = 0;
387 int i = 0;
388 struct dtlk_settings *sp;
390 if (dtlk_port_lpc | dtlk_port_tts)
391 return -EBUSY;
393 for (i = 0; dtlk_portlist[i]; i++) {
394 #if 0
395 printk("DoubleTalk PC - Port %03x = %04x\n",
396 dtlk_portlist[i], (testval = inw_p(dtlk_portlist[i])));
397 #endif
399 if (!request_region(dtlk_portlist[i], DTLK_IO_EXTENT,
400 "dtlk"))
401 continue;
402 testval = inw_p(dtlk_portlist[i]);
403 if ((testval &= 0xfbff) == 0x107f) {
404 dtlk_port_lpc = dtlk_portlist[i];
405 dtlk_port_tts = dtlk_port_lpc + 1;
407 sp = dtlk_interrogate();
408 printk("DoubleTalk PC at %03x-%03x, "
409 "ROM version %s, serial number %u",
410 dtlk_portlist[i], dtlk_portlist[i] +
411 DTLK_IO_EXTENT - 1,
412 sp->rom_version, sp->serial_number);
414 /* put LPC port into known state, so
415 dtlk_readable() gives valid result */
416 outb_p(0xff, dtlk_port_lpc);
418 /* INIT string and index marker */
419 dtlk_write_bytes("\036\1@\0\0012I\r", 8);
420 /* posting an index takes 18 msec. Here, we
421 wait up to 100 msec to see whether it
422 appears. */
423 msleep_interruptible(100);
424 dtlk_has_indexing = dtlk_readable();
425 #ifdef TRACING
426 printk(", indexing %d\n", dtlk_has_indexing);
427 #endif
428 #ifdef INSCOPE
430 /* This macro records ten samples read from the LPC port, for later display */
431 #define LOOK \
432 for (i = 0; i < 10; i++) \
434 buffer[b++] = inb_p(dtlk_port_lpc); \
435 __delay(loops_per_jiffy/(1000000/HZ)); \
437 char buffer[1000];
438 int b = 0, i, j;
440 LOOK
441 outb_p(0xff, dtlk_port_lpc);
442 buffer[b++] = 0;
443 LOOK
444 dtlk_write_bytes("\0012I\r", 4);
445 buffer[b++] = 0;
446 __delay(50 * loops_per_jiffy / (1000/HZ));
447 outb_p(0xff, dtlk_port_lpc);
448 buffer[b++] = 0;
449 LOOK
451 printk("\n");
452 for (j = 0; j < b; j++)
453 printk(" %02x", buffer[j]);
454 printk("\n");
456 #endif /* INSCOPE */
458 #ifdef OUTSCOPE
460 /* This macro records ten samples read from the TTS port, for later display */
461 #define LOOK \
462 for (i = 0; i < 10; i++) \
464 buffer[b++] = inb_p(dtlk_port_tts); \
465 __delay(loops_per_jiffy/(1000000/HZ)); /* 1 us */ \
467 char buffer[1000];
468 int b = 0, i, j;
470 mdelay(10); /* 10 ms */
471 LOOK
472 outb_p(0x03, dtlk_port_tts);
473 buffer[b++] = 0;
474 LOOK
475 LOOK
477 printk("\n");
478 for (j = 0; j < b; j++)
479 printk(" %02x", buffer[j]);
480 printk("\n");
482 #endif /* OUTSCOPE */
484 dtlk_write_bytes("Double Talk found", 18);
486 return 0;
488 release_region(dtlk_portlist[i], DTLK_IO_EXTENT);
491 printk(KERN_INFO "DoubleTalk PC - not found\n");
492 return -ENODEV;
496 static void dtlk_handle_error(char op, char rc, unsigned int minor)
498 printk(KERN_INFO"\nDoubleTalk PC - MINOR: %d, OPCODE: %d, ERROR: %d\n",
499 minor, op, rc);
500 return;
504 /* interrogate the DoubleTalk PC and return its settings */
505 static struct dtlk_settings *dtlk_interrogate(void)
507 unsigned char *t;
508 static char buf[sizeof(struct dtlk_settings) + 1];
509 int total, i;
510 static struct dtlk_settings status;
511 TRACE_TEXT("(dtlk_interrogate");
512 dtlk_write_bytes("\030\001?", 3);
513 for (total = 0, i = 0; i < 50; i++) {
514 buf[total] = dtlk_read_tts();
515 if (total > 2 && buf[total] == 0x7f)
516 break;
517 if (total < sizeof(struct dtlk_settings))
518 total++;
521 if (i==50) printk("interrogate() read overrun\n");
522 for (i=0; i<sizeof(buf); i++)
523 printk(" %02x", buf[i]);
524 printk("\n");
526 t = buf;
527 status.serial_number = t[0] + t[1] * 256; /* serial number is
528 little endian */
529 t += 2;
531 i = 0;
532 while (*t != '\r') {
533 status.rom_version[i] = *t;
534 if (i < sizeof(status.rom_version) - 1)
535 i++;
536 t++;
538 status.rom_version[i] = 0;
539 t++;
541 status.mode = *t++;
542 status.punc_level = *t++;
543 status.formant_freq = *t++;
544 status.pitch = *t++;
545 status.speed = *t++;
546 status.volume = *t++;
547 status.tone = *t++;
548 status.expression = *t++;
549 status.ext_dict_loaded = *t++;
550 status.ext_dict_status = *t++;
551 status.free_ram = *t++;
552 status.articulation = *t++;
553 status.reverb = *t++;
554 status.eob = *t++;
555 status.has_indexing = dtlk_has_indexing;
556 TRACE_RET;
557 return &status;
560 static char dtlk_read_tts(void)
562 int portval, retries = 0;
563 char ch;
564 TRACE_TEXT("(dtlk_read_tts");
566 /* verify DT is ready, read char, wait for ACK */
567 do {
568 portval = inb_p(dtlk_port_tts);
569 } while ((portval & TTS_READABLE) == 0 &&
570 retries++ < DTLK_MAX_RETRIES);
571 if (retries == DTLK_MAX_RETRIES)
572 printk(KERN_ERR "dtlk_read_tts() timeout\n");
574 ch = inb_p(dtlk_port_tts); /* input from TTS port */
575 ch &= 0x7f;
576 outb_p(ch, dtlk_port_tts);
578 retries = 0;
579 do {
580 portval = inb_p(dtlk_port_tts);
581 } while ((portval & TTS_READABLE) != 0 &&
582 retries++ < DTLK_MAX_RETRIES);
583 if (retries == DTLK_MAX_RETRIES)
584 printk(KERN_ERR "dtlk_read_tts() timeout\n");
586 TRACE_RET;
587 return ch;
590 static char dtlk_read_lpc(void)
592 int retries = 0;
593 char ch;
594 TRACE_TEXT("(dtlk_read_lpc");
596 /* no need to test -- this is only called when the port is readable */
598 ch = inb_p(dtlk_port_lpc); /* input from LPC port */
600 outb_p(0xff, dtlk_port_lpc);
602 /* acknowledging a read takes 3-4
603 usec. Here, we wait up to 20 usec
604 for the acknowledgement */
605 retries = (loops_per_jiffy * 20) / (1000000/HZ);
606 while (inb_p(dtlk_port_lpc) != 0x7f && --retries > 0);
607 if (retries == 0)
608 printk(KERN_ERR "dtlk_read_lpc() timeout\n");
610 TRACE_RET;
611 return ch;
614 /* write n bytes to tts port */
615 static char dtlk_write_bytes(const char *buf, int n)
617 char val = 0;
618 /* printk("dtlk_write_bytes(\"%-*s\", %d)\n", n, buf, n); */
619 TRACE_TEXT("(dtlk_write_bytes");
620 while (n-- > 0)
621 val = dtlk_write_tts(*buf++);
622 TRACE_RET;
623 return val;
626 static char dtlk_write_tts(char ch)
628 int retries = 0;
629 #ifdef TRACINGMORE
630 printk(" dtlk_write_tts(");
631 if (' ' <= ch && ch <= '~')
632 printk("'%c'", ch);
633 else
634 printk("0x%02x", ch);
635 #endif
636 if (ch != DTLK_CLEAR) /* no flow control for CLEAR command */
637 while ((inb_p(dtlk_port_tts) & TTS_WRITABLE) == 0 &&
638 retries++ < DTLK_MAX_RETRIES) /* DT ready? */
640 if (retries == DTLK_MAX_RETRIES)
641 printk(KERN_ERR "dtlk_write_tts() timeout\n");
643 outb_p(ch, dtlk_port_tts); /* output to TTS port */
644 /* the RDY bit goes zero 2-3 usec after writing, and goes
645 1 again 180-190 usec later. Here, we wait up to 10
646 usec for the RDY bit to go zero. */
647 for (retries = 0; retries < loops_per_jiffy / (100000/HZ); retries++)
648 if ((inb_p(dtlk_port_tts) & TTS_WRITABLE) == 0)
649 break;
651 #ifdef TRACINGMORE
652 printk(")\n");
653 #endif
654 return 0;
657 MODULE_LICENSE("GPL");