2 /* Microcode patches for the CPM as supplied by Motorola.
3 * This is the one for IIC/SPI. There is a newer one that
4 * also relocates SMC2, but this would require additional changes
5 * to uart.c, so I am holding off on that for a moment.
7 #include <linux/errno.h>
8 #include <linux/sched.h>
9 #include <linux/kernel.h>
10 #include <linux/param.h>
11 #include <linux/string.h>
13 #include <linux/interrupt.h>
15 #include <asm/mpc8xx.h>
17 #include <asm/pgtable.h>
18 #include <asm/8xx_immap.h>
19 #include <asm/commproc.h>
22 * I2C/SPI relocation patch arrays.
25 #ifdef CONFIG_I2C_SPI_UCODE_PATCH
146 uint patch_2f00
[] = {
180 * I2C/SPI/SMC1 relocation patch arrays.
183 #ifdef CONFIG_I2C_SPI_SMC1_UCODE_PATCH
185 uint patch_2000
[] = {
508 uint patch_2f00
[] = {
575 uint patch_2e00
[] = {
596 * USB SOF patch arrays.
599 #ifdef CONFIG_USB_SOF_UCODE_PATCH
601 uint patch_2000
[] = {
616 uint patch_2f00
[] = {
624 cpm_load_patch(cpm8xx_t
*cp
)
626 volatile uint
*dp
; /* Dual-ported RAM. */
627 volatile cpm8xx_t
*commproc
;
630 volatile smc_uart_t
*smp
;
635 #ifdef CONFIG_USB_SOF_UCODE_PATCH
636 commproc
->cp_rccr
= 0;
638 dp
= (uint
*)(commproc
->cp_dpmem
);
639 for (i
=0; i
<(sizeof(patch_2000
)/4); i
++)
640 *dp
++ = patch_2000
[i
];
642 dp
= (uint
*)&(commproc
->cp_dpmem
[0x0f00]);
643 for (i
=0; i
<(sizeof(patch_2f00
)/4); i
++)
644 *dp
++ = patch_2f00
[i
];
646 commproc
->cp_rccr
= 0x0009;
648 printk("USB SOF microcode patch installed\n");
649 #endif /* CONFIG_USB_SOF_UCODE_PATCH */
651 #if defined(CONFIG_I2C_SPI_UCODE_PATCH) || \
652 defined(CONFIG_I2C_SPI_SMC1_UCODE_PATCH)
654 commproc
->cp_rccr
= 0;
656 dp
= (uint
*)(commproc
->cp_dpmem
);
657 for (i
=0; i
<(sizeof(patch_2000
)/4); i
++)
658 *dp
++ = patch_2000
[i
];
660 dp
= (uint
*)&(commproc
->cp_dpmem
[0x0f00]);
661 for (i
=0; i
<(sizeof(patch_2f00
)/4); i
++)
662 *dp
++ = patch_2f00
[i
];
664 iip
= (iic_t
*)&commproc
->cp_dparam
[PROFF_IIC
];
665 # define RPBASE 0x0500
666 iip
->iic_rpbase
= RPBASE
;
668 /* Put SPI above the IIC, also 32-byte aligned.
670 i
= (RPBASE
+ sizeof(iic_t
) + 31) & ~31;
671 spp
= (spi_t
*)&commproc
->cp_dparam
[PROFF_SPI
];
674 # if defined(CONFIG_I2C_SPI_UCODE_PATCH)
675 commproc
->cp_cpmcr1
= 0x802a;
676 commproc
->cp_cpmcr2
= 0x8028;
677 commproc
->cp_cpmcr3
= 0x802e;
678 commproc
->cp_cpmcr4
= 0x802c;
679 commproc
->cp_rccr
= 1;
681 printk("I2C/SPI microcode patch installed.\n");
682 # endif /* CONFIG_I2C_SPI_UCODE_PATCH */
684 # if defined(CONFIG_I2C_SPI_SMC1_UCODE_PATCH)
686 dp
= (uint
*)&(commproc
->cp_dpmem
[0x0e00]);
687 for (i
=0; i
<(sizeof(patch_2e00
)/4); i
++)
688 *dp
++ = patch_2e00
[i
];
690 commproc
->cp_cpmcr1
= 0x8080;
691 commproc
->cp_cpmcr2
= 0x808a;
692 commproc
->cp_cpmcr3
= 0x8028;
693 commproc
->cp_cpmcr4
= 0x802a;
694 commproc
->cp_rccr
= 3;
696 smp
= (smc_uart_t
*)&commproc
->cp_dparam
[PROFF_SMC1
];
697 smp
->smc_rpbase
= 0x1FC0;
699 printk("I2C/SPI/SMC1 microcode patch installed.\n");
700 # endif /* CONFIG_I2C_SPI_SMC1_UCODE_PATCH) */
702 #endif /* some variation of the I2C/SPI patch was selected */
706 * Take this entire routine out, since no one calls it and its
712 verify_patch(volatile immap_t
*immr
)
715 volatile cpm8xx_t
*commproc
;
718 commproc
= (cpm8xx_t
*)&immr
->im_cpm
;
720 printk("cp_rccr %x\n", commproc
->cp_rccr
);
721 commproc
->cp_rccr
= 0;
723 dp
= (uint
*)(commproc
->cp_dpmem
);
724 for (i
=0; i
<(sizeof(patch_2000
)/4); i
++)
725 if (*dp
++ != patch_2000
[i
]) {
726 printk("patch_2000 bad at %d\n", i
);
728 printk("found 0x%X, wanted 0x%X\n", *dp
, patch_2000
[i
]);
732 dp
= (uint
*)&(commproc
->cp_dpmem
[0x0f00]);
733 for (i
=0; i
<(sizeof(patch_2f00
)/4); i
++)
734 if (*dp
++ != patch_2f00
[i
]) {
735 printk("patch_2f00 bad at %d\n", i
);
737 printk("found 0x%X, wanted 0x%X\n", *dp
, patch_2f00
[i
]);
741 commproc
->cp_rccr
= 0x0009;